CASE RMX 340 Tandem Disk
CASE RMX 340 Tandem Disk — parts list
578 part numbers across 55 assemblies, transcribed from the catalogue above. Search this page for a part number to find the assembly it belongs to.
04-01 19 – 22 FT LIGHT PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 446578A1 | 1 | HARNESS, Wiring, Front |
| 1 | 87446680 | 1 | HARNESS, WIRE, Wiring, Front, Used On Serial Number JFH0031778 And After |
| 2 | 27602224 | 1 | HARNESS, Wiring,Rear |
| 2 | 87446684 | 1 | HARNESS, WIRE, Wiring, Rear, Used On Serial Number JFH0031778 And After |
| 3 | 27602202 | 2 | LIGHT ASSY., Red |
| 3 | 87446791 | 2 | LAMP, Red, Used On Serial Number JFH0031778 And After |
| 4 | 27602201 | 2 | LIGHT ASSY., Amber |
| 4 | 87446792 | 2 | LAMP, Amber, Used On Serial Number JFH0031778 And After |
| 5 | 413-420 | 16 | BOLT, Hex, 1/4″-20 x 1 1/4″, G5 |
| 6 | 86992211 | 18 | NUT, LOCK, 1/4, NC, lock |
| 7 | 413-412 | 2 | BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd |
| 8 | 27601214 | 1 | HOLDER, Seven Pin Connector Storage |
| 11 | 87459252 | 1 | BRACKET, Red, Light, LH Inc. 12, 13 |
| 11 | 87459249 | 1 | BRACKET, Red, Light, RH Inc. 12, 13 |
| 12 | 311863A1 | 1 | REFLECTOR, Flourescent |
| 13 | 311865A1 | 1 | REFLECTOR, Red |
| 14 | 87403283 | 1 | BRACKET, Amber Light, LH Inc. 15 – 17, Used On 2007 And Prior Models |
| 14 | 87343510 | 1 | BRACKET, Amber Light, Lh, Inc. 15 – 17, Used On 2008 And After Models |
| 14 | 87454253 | 1 | BRACKET, Amber Light, RH Inc. 15 – 17, Used On 2007 And Prior Models |
| 14 | 87343502 | 1 | BRACKET, Amber Light, Rh, Inc. 15 – 17, Used On 2008 And After Models |
| 15 | 311864A1 | 1 | REFLECTOR, Yellow |
| 16 | 311863A1 | 1 | REFLECTOR, Flourescent |
| 17 | 311865A1 | 1 | REFLECTOR, Red |
| 18 | 413-1028 | 4 | BOLT, Hex, 5/8″-11 x 1 3/4″, G5 |
| 19 | 86992216 | 4 | NUT, LOCK, 5/8, NC, Lock |
| 20 | 413-1232 | 4 | BOLT, Hex, 3/4″-10 x 2″, G5 |
| 20 | 413-1296 | 4 | BOLT, Hex, 3/4″-10 x 6″, G5, , For Units Equipped With Factory Harrow Option |
| 21 | 86992217 | 4 | NUT, LOCK, 3/4, NC, Lock |
| 22 | 87449661 | 4 | SPACER, Bushing, Amber Light, Used On Serial Number JFH0031778 And After |
04-02 25 – 34 FT LIGHT PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 446578A1 | 1 | HARNESS, Front Wiring |
| 1 | 87446680 | 1 | HARNESS, WIRE, Front Wiring, Used On Serial Number JFH0031778 And After |
| 2 | 27602224 | 1 | HARNESS, Rear Wiring |
| 2 | 87446684 | 1 | HARNESS, WIRE, Rear Wiring, Used On Serial Number JFH0031778 And After |
| 3 | 27602202 | 2 | LIGHT ASSY., Red |
| 3 | 87446791 | 2 | LAMP, Red, Used On Serial Number JFH0031778 And After |
| 4 | 27602201 | 2 | LIGHT ASSY., Amber |
| 4 | 87446792 | 2 | LAMP, Amber, Used On Serial Number JFH0031778 And After |
| 5 | 413-420 | 16 | BOLT, Hex, 1/4″-20 x 1 1/4″, G5 |
| 6 | 86992211 | 18 | NUT, LOCK, 1/4 NC Lock |
| 7 | 413-412 | 2 | BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd |
| 8 | 27601214 | 1 | HOLDER, Seven Pin Connector Storage |
| 11 | 87459351 | 2 | BRACKET, Red Light Inc. 12, 13 |
| 12 | 311863A1 | 1 | REFLECTOR, Flourescent |
| 13 | 311865A1 | 1 | REFLECTOR, Red |
| 14 | 87403283 | 1 | BRACKET, Amber Light LH 34 ft Inc. 15 – 17, Used On 2007 And Prior Models |
| 14 | 87343510 | 1 | BRACKET, Amber Light, Lh, 34 ft, Inc. 15 – 17, Used On 2008 And After Models |
| 14 | 87454253 | 1 | BRACKET, Amber Light RH 34 ft Inc. 15 – 17, Used On 2007 And Prior Models |
| 14 | 87343502 | 1 | BRACKET, Amber Light, Rh, 34 ft, Inc. 15 – 17, Used On 2008 And After Models |
| 14 | 87459245 | 1 | BRACKET, Amber Light LH 25 – 31 ft Inc. 15 – 17, Used On 2007 And Prior Models |
| 14 | 87333818 | 1 | BRACKET, Amber Light, Lh 25 – 31 ft, Inc. 15 – 17, Used On 2008 And After Models |
| 14 | 87459246 | 1 | BRACKET, Amber Light RH 25 – 31 ft Inc. 15 – 17, Used On 2007 And Prior Models |
| 14 | 87333813 | 1 | BRACKET, Amber Light, Rh, 25 – 31 ft, Inc. 15 – 17, Used On 2008 And After Models |
| 15 | 311864A1 | 1 | REFLECTOR, Yellow |
| 16 | 311863A1 | 1 | REFLECTOR, Flourescent |
| 17 | 311865A1 | 1 | REFLECTOR, Red |
| 18 | 413-1028 | 4 | BOLT, Hex, 5/8″-11 x 1 3/4″, G5 |
| 19 | 86992216 | 4 | NUT, LOCK, 5/8 NC Lock |
| 20 | 16309101 | 4 | U-BOLT, 3/8 x 4 x 6 |
| 20 | 87405402 | 4 | U-BOLT, 3/8 x 3 x 5 , For Units Equipped With Factory Harrow Option |
| 21 | 86992213 | 8 | NUT, LOCK, 3/8 NC Lock |
| 22 | 87449661 | 4 | SPACER, Bushing, Amber Light, Used On Serial Number JFH0031778 And After |
08-01 TRANSPORT HYDRAULICS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87423771 | 2 | CYLINDER ASSY., Hydraulic, 3.5 In x 8 In, Rephase, Main Lift, 19 – 22 ft, See Figure 08-05, Black |
| 1 | 87423771 | 2 | CYLINDER ASSY., Hydraulic, 3.5 x 8, Rephase, 19 – 22 ft, See Figure 08-05, Chrome Rod |
| 1 | 87423766 | 2 | CYLINDER, Hydraulic, 3.75 In x 8 In, Rephase, Main Lift, 25 – 31 ft, See Figure 08-06, Black Rod |
| 1 | 87423766 | 2 | CYLINDER, Hydraulic 3.75 x 8, Rephase, Main Lift, 25 – 31 ft, See Figure 08-06, Chrome Rod |
| 1 | 87423777 | 2 | HYDRAULIC CYLINDER, Hydraulic, 4 In x 8 In, Rephase, Main Lift, 34 ft, Black Rod (Nitro Steel), See |
| 1 | 87423777 | 2 | HYDRAULIC CYLINDER, Hydraulic, 4 x 8, Rephase, Main Lift, 34 ft, See Figure 08-07, Chrome Rod |
| 2 | 87423766 | 2 | CYLINDER, Hydraulic, 3.75 In x 8 In, Rephase, Main Lift, 19 – 22 ft, See Figure 08-06, Black Rod |
| 2 | 87423766 | 2 | CYLINDER, 3.75 x 8, Rephase, Main Lift, 19 – 22 ft, See Figure 08-06, Chrome Rod |
| 2 | 87423777 | 2 | HYDRAULIC CYLINDER, Hydraulic, 4 In x 8 In, Rephase, Main Lift, 25 – 31 ft, Black Rod (Nitro Steel) |
| 2 | 87423777 | 2 | HYDRAULIC CYLINDER, Hydraulic, 4 x 8, Rephase, Main Lift, 25 – 31 ft, See Figure 08-07, Chrome |
| 2 | 87388863 | 2 | HYDRAULIC CYLINDER, Hydraulic, 4.25 In x 8 In, Rephase, Main Lift, 34 ft, Chrome Rod, See Figure |
| 2 | 87388863 | 2 | HYDRAULIC CYLINDER, Hydraulic, 4.25 x 8, Rephase, Main Lift 34 ft, See Figure 08-08, Black Rod |
| 3 | 1284253C1 | 1 | HOSE, 3/8 In x 150 In, 19 ft |
| 3 | 1284255C1 | 1 | HOSE, 3/8 In x 185 In, 22 ft |
| 3 | 1284258C1 | 1 | HOSE, 3/8 In x 225 In, 25 ft |
| 3 | 1284259C1 | 1 | HOSE, 3/8 In x 250 In, 28 – 34 ft |
| 4 | 1284252C1 | 1 | HOSE, 3/8 In x 140 In, 19 ft |
| 4 | 1284254C1 | 1 | HOSE, 3/8 In x 170 In, 22 ft |
| 4 | 1284257C1 | 1 | HOSE, 3/8 In x 210 In, 25 ft |
| 4 | 1284314C1 | 1 | HOSE, 3/8 In x 235 In, 28 – 34 ft |
| 5 | 139519C2 | 2 | HOSE, 3/8 In x 135 In, 19 ft |
| 5 | 1284298C1 | 2 | HOSE, 3/8 In x 160 In, 22 ft |
| 5 | 1284255C1 | 2 | HOSE, 3/8 In x 185 In, 25 ft |
| 5 | 1284257C1 | 2 | HOSE, 3/8 In x 210 In, 28 – 31 ft |
| 5 | 435694A1 | 2 | HOSE, 3/8 In x 190 In, 34 ft |
| 6 | 1285380C2 | 1 | HOSE, 3/8 In x 50 In, 19 – 31 ft |
| 6 | 95778C1 | 1 | HOSE ASSY., 3/8 In x 70 In, 34 ft |
| 7 | 1259625C1 | 1 | HOSE, 3/8 In x 33 In, 19 – 31 ft |
| 7 | 1285380C2 | 1 | HOSE, 3/8 In x 50 In, 34 ft |
| 8 | 1284323C1 | 1 | HOSE, 3/8 In x 15 In, 19 – 31 ft |
| 8 | 1280792C1 | 1 | HOSE, 3/8 In x 21 In, 34 ft |
| 9 | 1284255C1 | 2 | HOSE, 3/8 In x 185 In, 19 – 31 ft |
| 9 | 1284257C1 | 2 | HOSE, 3/8 In x 210 In, 34 ft |
| 10 | 25705041 | 2 | COUPLING, 3/4 SAEF – Male ISO |
| 11 | 218-5058 | 3 | CONNECTOR, HYD., 9/16″-18, 37є x 3/4″-18, O-Ring |
| 12 | 06200125 | 2 | CLAMP, HOSE |
| 13 | 413-640 | 2 | BOLT, Hex, 3/8″-16 x 2 1/2″, G5, (2 Clamps) |
| 13 | 413-656 | 2 | BOLT, Hex, 3/8″-16 x 3 1/2″, G5, (3 Clamps) |
| 17 | 396150A1 | 1 | VALVE, CONTROL, Hydraulic Depth |
| 18 | 214389 | 1 | PLUG, Hex Hd, 3/4″-16 ORB |
| 19 | 433-536 | 2 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 2 1/4″, G5 |
| 20 | 86992212 | 2 | NUT, LOCK, 5/16, NC, Lock |
| 21 | 218-5128 | 9 | ELBOW, 90є, 9/16″-18, 37є x 3/4″-16, O-Ring |
| 22 | 218-593 | 2 | TEE, 9/16″-18, 37є, 9/16 JICM |
| 23 | 87735776 | 4 | PIN, 1 Clevis |
| 24 | 432-1632 | 8 | PIN, SPLIT (COTTER), 1/4″ x 2″ |
| 25 | 87735776 | 4 | PIN, 1 Clevis, 19 – 31 ft |
| 25 | 427-20375 | 4 | PIN, CLEVIS, 1 1/4″ x 3 3/4″, 34 ft |
08-02 19 – 31 FT WING FOLD HYDRAULICS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87388869 | 2 | HYDRAULIC CYLINDER, 3-1/2 In x 42 In, 19 – 25 ft, See Figure 08-09, Chrome Rod |
| 1 | 87388869 | 2 | HYDRAULIC CYLINDER, 3-1/2 x 42, 19 – 25 ft, See Figure 08-09, Black Rod (Nitro Steel) |
| 1 | 87388875 | 2 | HYDRAULIC CYLINDER, 4 In x 42 In, 28 – 31 ft, See Figure 08-10, Chrome Rod |
| 1 | 87388875 | 2 | HYDRAULIC CYLINDER, 4 x 42, 28 – 31 ft, See Figure 08-10, Black Rod (Nitro Steel) |
| 2 | 427-20375 | 2 | PIN, CLEVIS, 1 1/4″ x 3 3/4″ |
| 3 | 432-2032 | 4 | PIN, SPLIT (COTTER), 5/16″ x 2″ |
| 4 | 439-52088 | 2 | PIN, HEADED, 1 1/4″ x 5 1/2″, Clevis |
| 5 | 337157A1 | 2 | HOSE ASSY., 1/4 In x 270 In |
| 6 | 843066C1 | 1 | HOSE ASSY., 1/4 In x 33 In, 19 – 31 ft |
| 7 | 1969386C1 | 1 | HOSE ASSY., 1/4 In x 23 In, 19 – 22 ft |
| 7 | 97638C1 | 1 | HOSE ASSY., 1/4 In x 19 In 25, – 31 ft |
| 8 | 1969386C1 | 1 | HOSE ASSY., 1/4 In x 23 In, 19 – 31 ft |
| 9 | 843066C1 | 1 | HOSE ASSY., 1/4 In x 33 In, 19 – 22 ft |
| 9 | 147876C1 | 1 | HOSE, 1/4 In x 45 In, 25 – 31 ft |
| 10 | 218-5128 | 4 | ELBOW, 90є, 9/16″-18, 37є x 3/4″-16, O-Ring |
| 11 | 218-593 | 2 | TEE, 9/16″-18, 37є |
| 12 | 06200125 | 6 | CLAMP, HOSE, Hose |
| 13 | 413-640 | 2 | BOLT, Hex, 3/8″-16 x 2 1/2″, G5, (2 clamps) |
| 13 | 413-656 | 2 | BOLT, Hex, 3/8″-16 x 3 1/2″, G5, (3 clamps) |
| 17 | 218-5058 | 2 | CONNECTOR, HYD., 9/16″-18, 37є x 3/4″-18, O-Ring |
| 18 | 25705041 | 2 | COUPLING, 3/4 SAEF – Male ISO |
08-03 34 FT WING FOLD HYDRAULICS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87388875 | 2 | HYDRAULIC CYLINDER, 4 In x 42 In, See Figure 08-10, Chrome Rod |
| 1 | 87388875 | 2 | HYDRAULIC CYLINDER, 4 x 42, See Figure 08-10, Black Rod (Nitro Steel) |
| 2 | 427-20375 | 2 | PIN, CLEVIS, 1 1/4″ x 3 3/4″, Clevis |
| 3 | 432-2032 | 4 | PIN, SPLIT (COTTER), 5/16″ x 2″ |
| 4 | 439-52088 | 2 | PIN, HEADED, 1 1/4″ x 5 1/2″, Clevis 1-1/4 x 5-1/2 |
| 5 | 193759A1 | 1 | HOSE, 1/4 In x 285 In |
| 6 | 193759A1 | 1 | HOSE, 1/4 In x 285 In |
| 7 | 129908C1 | 1 | HOSE, 1/4 In x 55 In |
| 8 | 1969386C1 | 1 | HOSE ASSY., 1/4 In x 23 In |
| 9 | 97478C1 | 1 | HOSE ASSY., 1/4 In x 75 In |
| 10 | 218-5128 | 3 | ELBOW, 90є, 9/16″-18, 37є x 3/4″-16, O-Ring |
| 11 | 218-5192 | 1 | TEE, 9/16″-18, 37є x 3/4″-16, O-Ring Br, 3/4 SAEM – 9/16 JICM (2) |
| 12 | 218-593 | 1 | TEE, 9/16″-18, 37є, 9/16 JICM |
| 13 | 06200125 | 6 | CLAMP, HOSE |
| 14 | 413-640 | 2 | BOLT, Hex, 3/8″-16 x 2 1/2″, G5, 3/8 x 2-1/2 (2 clamps) |
| 14 | 413-656 | 2 | BOLT, Hex, 3/8″-16 x 3 1/2″, G5, (3 clamps) |
| 18 | 218-5058 | 2 | CONNECTOR, HYD., 9/16″-18, 37є x 3/4″-18, O-Ring |
| 19 | 25705041 | 2 | COUPLING, 3/4 SAEF – Male ISO |
08-04 LEVELING PULL FRAME HYDRAULICS (OPTIONAL)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87413124 | 1 | BODY, Turnbuckle Inc. 2, 3 |
| 2 | 219-86 | 2 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive |
| 3 | 87395867 | 1 | DECAL, Depth Control, Turnbuckle |
| 4 | 87413115 | 1 | CLEVIS, Turnbuckle, RH |
| 5 | 87413116 | 1 | CLEVIS, Turnbuckle, LH |
| 6 | 87413119 | 1 | PIN, LOCK, Turnbuckle Lock |
| 7 | 1978738C1 | 1 | PIN, SPLIT (COTTER), Hair, 3/16 x 3 |
| 8 | 103-11100 | 1 | RING, SNAP, #100, .925″, Ext, Retaining, External |
| 9 | 496-81009 | 4 | WASHER, 1 5/16″ x 1 63/64″ x .180″, HDN |
| 10 | 17620020 | 6 | BUSHING, 1.25, Machine Bushing, 14 ga |
| 11 | 86993942 | 2 | PIN, 1.25 Dia x 154 mm |
| 12 | 438-12036 | 4 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
| 13 | 87388864 | 1 | HYDRAULIC CYLINDER, 5 x 8 With Stop, Chrome Rod |
| 13 | 87388864 | 1 | HYDRAULIC CYLINDER, 5 x 8, With Stop, Black Rod (Nitro Steel) |
| 14 | 86993914 | 1 | INDICATOR, Leveling Inc 15 |
| 15 | 86993500 | 1 | DECAL, Level Indicator |
| 16 | 87411878 | 1 | BAR, Pointer, RH |
| 17 | 86993913 | 1 | BAR, Pointer, LH |
| 18 | 86993912 | 1 | BUSHING, Level Indicator |
| 19 | 413-10104 | 1 | BOLT, Hex, 5/8″-11 x 6 1/2″, G5 |
| 20 | 86992216 | 1 | NUT, LOCK, 5/8, NC |
| 21 | 17616021 | 2 | BUSHING, 1, Machine Bushing, 14 ga |
| 22 | 218-5128 | 2 | ELBOW, 90є, 9/16″-18, 37є x 3/4″-16, O-Ring |
| 23 | 1969386C1 | 1 | HOSE ASSY., 1/4 In x 23 In |
| 24 | 147875C1 | 1 | HOSE, 1/4 In x 35 In |
| 25 | 1254526C2 | 2 | HOSE, 1/4 In x 135 In |
| 26 | 06200125 | 6 | CLAMP, HOSE |
| 27 | 413-656 | 2 | BOLT, Hex, 3/8″-16 x 3 1/2″, G5 |
| 28 | 86992213 | 2 | NUT, LOCK, 3/8, NC |
| 29 | 218-5058 | 4 | CONNECTOR, HYD., 9/16″-18, 37є x 3/4″-18, O-Ring |
| 30 | 25705041 | 2 | COUPLING, 3/4 SAEF – Male ISO |
| 31 | 298624A1 | 1 | VALVE, Check |
| 32 | 1263477C3 | 2 | CONNECTOR, HYD., Orifice – 3/4 SAEM – 9/16 JICM |
| 33 | 09987521 | 1 | PLATE, Top |
| 34 | 426-436 | 2 | BOLT, Hex, 1/4″-20 x 2 1/4″, G8 |
| 35 | 86992211 | 2 | NUT, LOCK, 1/4, NC |
| 36 | 395084A1 | 1 | PLATE, Wrench Turnbuckle |
| 37 | A33497 | 1 | PIN, LINCH, Klik, 3/16 x 1-1/4 |
08-05 3-1/2 IN X 8 IN TRANSPORT CYLINDER 19 – 22 FT TANDEM DISK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86590562 | 1 | PLUG, Hex Soc, 3/4″-16 ORB |
| 2 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 3 | 87409430 | 1 | HEAD, Clevis Base End |
| 6 | 232-46316 | 1 | NUT, LOCK, 1″-14, GC |
| 10 | 87409469 | 1 | PISTON, Cylinder |
| 11 | 87409452 | 1 | ROD, PISTON, , Black Rod (Nitro Steel) |
| 11 | 87525934 | 1 | ROD, PISTON, , Chrome Rod |
| 12 | 87409486 | 4 | BOLT, Tie |
| 13 | 87409395 | 1 | HEAD, Rod End |
| 14 | 25-1110 | 4 | NUT, 5/8″-18, G5 |
| 18 | 83-1388 | 1 | SET SCREW, Hex Soc, 3/8″-16 x 1/2″, Set, 3/8, NC |
| 19 | 87409387 | 1 | CLEVIS, Rod End |
08-06 3-3/4 IN X 8 IN TRANSPORT CYLINDER 19 – 31 FT TANDEM DISK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86590562 | 1 | PLUG, Hex Soc, 3/4″-16 ORB, Inc. 2 |
| 2 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 3 | 87409431 | 1 | HEAD, Clevis Base End |
| 6 | 232-46318 | 1 | NUT, LOCK, 1 1/8″-12, GC |
| 10 | 87409471 | 1 | PISTON, Cylinder |
| 11 | 87409453 | 1 | ROD, PISTON, , Black Rod (Nitro Steel) |
| 11 | 87525935 | 1 | ROD, PISTON, , Chrome Rod |
| 12 | 87409486 | 4 | BOLT, Tie |
| 13 | 87409396 | 1 | HEAD, Rod End |
| 14 | 25-1110 | 4 | NUT, 5/8″-18, G5 |
| 18 | 83-1388 | 1 | SET SCREW, Hex Soc, 3/8″-16 x 1/2″ |
| 19 | 87409387 | 1 | CLEVIS, Rod End |
08-07 4 IN X 8 IN TRANSPORT CYLINDER 25 – 34 FT TANDEM DISK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86590562 | 1 | PLUG, Hex Soc, 3/4″-16 ORB, Inc. 2 |
| 2 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 3 | 87409432 | 1 | HEAD, Clevis Base End |
| 6 | 232-46318 | 1 | NUT, LOCK, 1 1/8″-12, GC |
| 10 | 87409482 | 1 | PISTON, Cylinder |
| 11 | 87409453 | 1 | ROD, PISTON, , Black Rod (Nitro Steel) |
| 11 | 87525935 | 1 | ROD, PISTON, , Chrome Rod |
| 12 | 87409486 | 4 | BOLT, Rod Tie |
| 13 | 87409397 | 1 | HEAD, Rod End |
| 14 | 25-1110 | 4 | NUT, 5/8″-18, G5 |
| 18 | 83-1388 | 1 | SET SCREW, Hex Soc, 3/8″-16 x 1/2″ |
| 19 | 87409387 | 1 | CLEVIS, Rod End |
08-08 4-1/4 IN X 8 IN TRANSPORT CYLINDER 34 FT TANDEM DISK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86590562 | 1 | PLUG, Hex Soc, 3/4″-16 ORB, Inc. 2 |
| 2 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 3 | 87425784 | 1 | CYLINDER HEAD, Base End |
| 6 | 232-46320 | 1 | NUT, LOCK, 1 1/4″-12, GC |
| 10 | 87409473 | 1 | PISTON, Cylinder |
| 11 | 87393647 | 1 | ROD, PISTON, Rod, Chrome Rod |
| 11 | 87409454 | 1 | PISTON, , Black Rod (Nitro Steel) |
| 12 | 87409486 | 4 | BOLT, Tie |
| 13 | 87409398 | 1 | HEAD, Cap Rod End |
| 14 | 25-1110 | 4 | NUT, 5/8″-18, G5 |
| 18 | 83-1388 | 1 | SET SCREW, Hex Soc, 3/8″-16 x 1/2″ |
| 19 | 87409389 | 1 | CLEVIS, Rod End |
08-09 3-1/2 IN X 42 IN WING FOLD CYLINDER 19 – 25 FT TANDEM DISK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86590562 | 1 | PLUG, Hex Soc, 3/4″-16 ORB, Inc. 2 |
| 2 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 3 | 87409446 | 1 | HEAD, Clevis Base End |
| 6 | 232-46316 | 1 | NUT, LOCK, 1″-14, GC |
| 10 | 87409469 | 1 | PISTON, Cylinder |
| 11 | 87393654 | 1 | ROD, PISTON, Piston, Chrome Rod |
| 11 | 87393650 | 1 | ROD, PISTON, , Black Rod (Nitro Steel) |
| 12 | 87410780 | 4 | TIE-ROD, Tie |
| 13 | 87409403 | 1 | HEAD, Rod End |
| 14 | 25-1110 | 4 | NUT, 5/8″-18, G5 |
| 18 | 83-1388 | 1 | SET SCREW, Hex Soc, 3/8″-16 x 1/2″ |
| 19 | 87409390 | 1 | CLEVIS, Rod End |
08-10 4 IN X 42 IN WING FOLD CYLINDER 28 – 34 FT TANDEM DISK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86590562 | 1 | PLUG, Hex Soc, 3/4″-16 ORB, Inc. 2 |
| 2 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 3 | 87409439 | 1 | HEAD, Base End |
| 6 | 232-46318 | 1 | NUT, LOCK, 1 1/8″-12, GC |
| 10 | 87409482 | 1 | PISTON, Cylinder |
| 11 | 87393653 | 1 | ROD, PISTON, Piston, Chrome Rod |
| 11 | 87393650 | 1 | ROD, PISTON, , Black Rod (Nitro Steel) |
| 12 | 87410780 | 4 | TIE-ROD, Tie |
| 13 | 87410785 | 1 | CAP CYLINDER END, Rod End |
| 14 | 25-1110 | 4 | NUT, 5/8″-18, G5 |
| 18 | 83-1388 | 1 | SET SCREW, Hex Soc, 3/8″-16 x 1/2″ |
| 19 | 87409390 | 1 | CLEVIS, Rod End |
08-11 5 IN X 8 IN PULL FRAME LEVELING CYLINDER (OPTIONAL)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86590562 | 1 | PLUG, Hex Soc, 3/4″-16 ORB, Inc. 2 |
| 2 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 3 | 87409428 | 1 | HEAD, Clevis Base End |
| 6 | 232-46324 | 1 | NUT, LOCK, 1 1/2″-12, GC |
| 10 | 87409467 | 1 | PISTON, Cylinder |
| 11 | 87393648 | 1 | ROD, PISTON, Piston, Chrome Rod |
| 11 | 87393648 | 1 | ROD, PISTON, , Black Rod (Nitro Steel) |
| 12 | 87409487 | 4 | BOLT, Rod Tie |
| 13 | 87410790 | 1 | CAP CYLINDER END, Rod End |
| 14 | 25-1112 | 4 | NUT, 3/4″-16, G5 |
| 18 | 83-1388 | 1 | SET SCREW, Hex Soc, 3/8″-16 x 1/2″ |
| 19 | 87409389 | 1 | CLEVIS, Rod End |
08-12 REAR HITCH HYDRAULICS – 19 THROUGH 25 FOOT UNITS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 25705012 | 1 | COUPLING, Breakaway |
| 2 | 25705021 | 2 | COUPLING, Female |
| 3 | 218-5058 | 2 | CONNECTOR, HYD., 9/16″-18, 37є x 3/4″-18, O-Ring |
| 4 | 22510700 | 3 | CLAMP, HOSE, 5/8, Cushioned |
| 5 | 433-616 | 3 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5 |
| 6 | 86992213 | 4 | NUT, LOCK, 3/8 |
| 7 | 218-5222 | 2 | TEE, 37є, 9/16″-18, x 9/16″-18, Fem Sw Run |
| 8 | 810601C1 | 2 | HOSE, 1/4 x165 |
| 9 | 87360594 | 1 | HARNESS, WIRE, Light Harness, 19-25 Units |
| 10 | 413-416 | 2 | BOLT, Hex, 1/4″-20 x 1″, G5 |
| 11 | 413-620 | 1 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 12 | 495-21044 | 1 | WASHER, 3/8″ |
| 13 | 86992211 | 2 | NUT, LOCK, 1/4, NC |
08-13 REAR HITCH HYDRAULICS 28 THROUGH 34 UNITS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 25705021 | 2 | COUPLING, Female |
| 2 | 25705012 | 1 | COUPLING, Breakaway |
| 3 | 218-5058 | 2 | CONNECTOR, HYD., 9/16″-18, 37є x 3/4″-18, O-Ring |
| 4 | 22510700 | 3 | CLAMP, HOSE, 5/8, Cushioned |
| 5 | 433-616 | 3 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5 |
| 6 | 218-5222 | 2 | TEE, 37є, 9/16″-18, x 9/16″-18, Fem Sw Run |
| 7 | 87360600 | 1 | HARNESS, WIRE, Light Harness, 28-34 Units |
| 8 | 810606C1 | 2 | HOSE, FLEXIBLE, 1/4 x 195 |
| 9 | 86992213 | 4 | NUT, LOCK, 3/8 |
| 10 | 413-620 | 1 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 11 | 86992211 | 2 | NUT, LOCK, 1/4, NC |
| 12 | 495-21044 | 1 | WASHER, 3/8″ |
| 13 | 413-416 | 2 | BOLT, Hex, 1/4″-20 x 1″, G5 |
09-01 19-31 FT MAIN FRAME PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 451353A1 | 1 | FRAME ASSY, Main, 19 – 22 ft, Inc. 2 – 4 |
| 1 | 451354A1 | 1 | FRAME ASSY, Main, 25 – 31 ft, Inc. 2 – 4 |
| 2 | 18534227 | 4 | DECAL, DANGER, Danger Sign |
| 3 | 311864A1 | 2 | REFLECTOR, Amber |
| 4 | 18534277 | 1 | DECAL, Warning Sign |
| 5 | 86992768 | 1 | DECAL, RMX340, LH, Used On 2006 And Prior Models |
| 5 | 87735841 | 1 | DECAL, 340 True-Tandem, Lh, Used On 2007 And After Models |
| 6 | 86992769 | 1 | DECAL, RMX340, RH, Used On 2006 And Prior Models |
| 6 | 87735842 | 1 | DECAL, 340 True-Tandem, Rh, Used On 2007 And After Models |
| 7 | 443040A1 | 1 | ROCKSHAFT, Dual Wheels, 19 – 22 ft |
| 7 | 87411412 | 1 | ROCKSHAFT, Tandem Wheels, 19 – 22 ft |
| 7 | 441537A1 | 1 | ROCKSHAFT, Tandem Wheels, 25 – 31 ft |
| 8 | 86984889 | 2 | BEARING COVER, Wheel Shaft |
| 9 | 86984888 | 2 | CAP, Wheel Shaft |
| 10 | 219-87 | 4 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 11 | 413-14104 | 4 | BOLT, Hex, 7/8″-9 x 6 1/2″, G5 |
| 12 | 86992218 | 4 | NUT, LOCK, 7/8, NC |
| 13 | 442025A1 | 1 | MOUNTING PARTS, Center Shank |
| 14 | 87420947 | 2 | BOLT, 3/4 x 3 x 4, (19 – 22 ft) |
| 14 | 87427185 | 2 | U-BOLT, 3/4 x 4 x 4, (25 – 31 ft) |
| 15 | 86992217 | 4 | NUT, LOCK, 3/4, NC |
| 16 | 06000099 | 1 | BRACE, SMV Bracket |
| 17 | 311860A1 | 1 | EMBLEM, Plate SMV |
| 18 | 413-412 | 2 | BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd |
| 19 | 86992211 | 2 | NUT, LOCK, 1/4, NC |
| 20 | 413-620 | 2 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 21 | 86992213 | 2 | NUT, LOCK, 3/8, NC |
| 22 | 87595770 | 2 | DECAL, Case IH, Used On 2007 And Prior Models |
| 22 | 87594280 | 2 | DECAL, Case IH, Used On 2008 And After Models |
| 22 | 87653276 | 2 | DECAL, Case IH, Used On 2008 And After Models |
09-02 34 FT MAIN FRAME PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 448380A1 | 1 | FRAME ASSY, Main, LH, Inc. 2 – 4 |
| 2 | 18534227 | 2 | DECAL, DANGER, Danger |
| 3 | 311864A1 | 1 | REFLECTOR, Amber |
| 4 | 18534277 | 1 | DECAL, Warning |
| 5 | 448382A1 | 1 | FRAME ASSY, Main, RH, Inc. 6, 7 |
| 6 | 18534227 | 1 | DECAL, DANGER, Danger |
| 7 | 311864A1 | 1 | REFLECTOR, Amber |
| 8 | 86992768 | 1 | DECAL, RMX340, Lh, Used On 2006 And Prior Models |
| 8 | 87735841 | 1 | DECAL, 340 True-Tandem, Lh, Used On 2007 And After Models |
| 9 | 86992769 | 1 | DECAL, RMX340, Rh, Used On 2006 And Prior Models |
| 9 | 87735842 | 1 | DECAL, 340 True-Tandem, Rh, Used On 2007 And After Models |
| 10 | 448191A1 | 1 | ROCKSHAFT, Tandem |
| 11 | 86984889 | 4 | BEARING COVER, Wheel Shaft |
| 12 | 86984888 | 4 | CAP, Wheel Shaft |
| 13 | 219-87 | 8 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 14 | 413-14104 | 8 | BOLT, Hex, 7/8″-9 x 6 1/2″, G5, 7/8 x 6-1/2, NC, gr 5 |
| 15 | 86992218 | 8 | NUT, LOCK, 7/8, NC |
| 16 | 442025A1 | 1 | MOUNTING PARTS, Center Shank |
| 17 | 87427185 | 2 | U-BOLT, 3/4 x 4 x 4 |
| 18 | 86992217 | 4 | NUT, LOCK, 3/4, NC |
| 19 | 06000099 | 1 | BRACE, SMV Bracket |
| 20 | 311860A1 | 1 | EMBLEM, Plate SMV |
| 21 | 413-412 | 2 | BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd |
| 22 | 86992211 | 2 | NUT, LOCK, 1/4, NC |
| 23 | 413-620 | 2 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 24 | 86992213 | 2 | NUT, LOCK, 3/8, NC |
| 25 | 413-1236 | 8 | BOLT, Hex, 3/4″-10 x 2 1/4″, G5 |
| 26 | 86992217 | 8 | NUT, LOCK, 3/4, NC |
| 27 | 87595770 | 2 | DECAL, Case IH, Used On 2007 And Prior Models |
| 27 | 87594280 | 2 | DECAL, Case IH, Used On 2008 And After Models |
09-03 PULL FRAME PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86985162 | 1 | FRAME ASSY, Pull, 19 – 31 ft, Inc. 2 – 13, Used On 2007 And Prior Models |
| 1 | 87673557 | 1 | HITCH, Pull, 19 – 31 ft, Inc. 2 – 13, Used On 2008 And After Models |
| 1 | 448498A1 | 1 | HITCH, Pull, 34 ft, Inc. 2 – 13, Used On 2007 And Prior Models |
| 1 | 87673554 | 1 | HITCH, Pull, 34 ft, Inc. 2 – 13, Used On 2008 And After Models |
| 2 | 147782C1 | 1 | DECAL, Earth Metal |
| 3 | 311864A1 | 2 | REFLECTOR, Amber |
| 4 | 18534228 | 1 | DECAL, Caution |
| 5 | 18534282 | 1 | DECAL, WARNING, Warning |
| 6 | 18534275 | 1 | DECAL, DANGER, Overhead Powerlines, Used On 2007 And Prior Models |
| 6 | 87673548 | 1 | DECAL, Overhead Powerlines, Used On 2008 And After Models |
| 7 | 87415983 | 1 | DECAL, Unhitching Hazard, Used On 2007 And Prior Models |
| 7 | 87673549 | 1 | DECAL, Unhitching Hazard, Used On 2008 And After Models |
| 8 | 443890A1 | 1 | DECAL, Towing Hazard, Used On 2007 And Prior Models |
| 8 | 87672316 | 1 | DECAL, Towing Hazard, Used On 2008 And After Models |
| 9 | 413-1664 | 1 | BOLT, Hex, 1″-8 x 4″, G5 |
| 10 | 06400065 | 1 | WASHER, Heavy, Saftey Chain |
| 11 | 340324A1 | 1 | BUSHING, Safety Chain |
| 12 | 87393082 | 1 | CHAIN, Safety, 20,200 lb, 19 – 31 ft |
| 12 | 87389757 | 1 | CHAIN, Safety, 30,400 lb, 34 ft |
| 13 | 86992219 | 1 | NUT, LOCK, 1, NC, Stover |
| 14 | 362933A1 | 1 | HITCH, Perfect, Cat III, 19 – 25 ft |
| 14 | 362934A1 | 1 | HITCH ASSY, Perfect, Cat IV, 28 – 34 ft |
| 14 | 87432117 | 1 | HITCH ASSY, Double, Cat II, Not Shown |
| 15 | 87030492 | 2 | BOLT, Hex, 1″-8 x 8 1/2″, G8 |
| 16 | 86992219 | 2 | NUT, LOCK, 1, NC |
| 17 | 495-11106 | 10 | WASHER, 1″, SAE |
| 18 | 05302150 | 1 | STAND, Hose |
| 19 | 214-1452 | 1 | CLAMP, HOSE, #52, 2.81/3.75 Type F Worm |
| 20 | 30026030 | 1 | TUBE, Manual Canister |
| 21 | 121558A1 | 1 | JACK ASSY. |
| 22 | 252079A1 | 2 | BOLT, 1-1/4 x 5, NC, gr 8 |
| 23 | 496-81017 | 8 | WASHER, 1 3/8″ x 2 1/2″ x .156″, HDN |
| 24 | 86992220 | 2 | NUT, LOCK, 1-1/4, NC |
| 25 | 87425680 | 1 | DECAL, Important Rear Jack |
| 26 | 87668160 | 1 | DECAL, Transport, Turning Hazard |
09-04 WING FRAME PARTS (QUANTITY PER WING)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 451356A1 | 1 | FRAME ASSY, Wing, RH, 19 ft, Inc. 2 – 4 |
| 1 | 451359A1 | 1 | FRAME ASSY, Wing, LH, 19 ft, Inc. 2 – 4 |
| 1 | 451357A1 | 1 | FRAME ASSY, Wing, RH, 22 – 25 ft, Inc. 2 – 4 |
| 1 | 451360A1 | 1 | FRAME ASSY, Wing, LH, 22 – 25 ft, Inc. 2 – 4 |
| 1 | 87376951 | 1 | FRAME ASSY, Wing, RH, 28 – 34 ft, Inc. 2 – 4 |
| 1 | 87376964 | 1 | FRAME ASSY, Wing, LH, 28 – 34 ft, Inc. 2 – 4 |
| 2 | 380134A1 | 2 | BUSHING, Connex 2 x 1-3/4 x 1-1/4 |
| 3 | 192849A2 | 1 | DECAL, CIH Logo |
| 4 | 219-87 | 2 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 5 | 441856A1 | 1 | ARM ASSY., Wing Tandem Wheel, LH |
| 5 | 441857A1 | 1 | ARM ASSY., Wing Tandem Wheel, RH |
| 6 | 443062A1 | 1 | ARM ASSY., Wing Dual Wheel, LH |
| 6 | 443063A1 | 1 | ARM ASSY., Wing Dual Wheel, RH |
| 7 | 441862A1 | 1 | PIN, Tandem, 1-1/4, NC |
| 8 | 413-1072 | 1 | BOLT, Hex, 5/8″-11 x 4 1/2″, G5 |
| 9 | 86992216 | 1 | NUT, LOCK, 5/8, NC |
| 10 | 86992220 | 1 | NUT, LOCK, 1-1/4, NC |
| 14 | 86992216 | 4 | NUT, LOCK, 5/8, NC |
| 15 | 87404919 | 1 | STOP, Transport |
| 16 | 14810251 | 1 | PIN, HEADED, 5/8 x 3-1/4 |
| 17 | 14720411 | 1 | PIN, SPLIT (COTTER), 1/8 x 2 |
| 18 | 439-5892 | 1 | PIN, HEADED, 1/2″ x 5 3/4″, G5 |
| 19 | 1978738C1 | 1 | PIN, SPLIT (COTTER), Hair, 3/16 x 3 |
| 20 | 87568977 | 1 | EYEBOLT, 1-1/4, NC |
| 21 | 425-1020 | 2 | NUT, 1 1/4″-7, G5 |
09-05 ROCKSHAFT DUAL 6-BOLT PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86990480 | 4 | SPINDLE, 6 Bolt |
| 2 | 594703R1 | 4 | SLEEVE, Wear |
| 3 | 594702R91 | 4 | SEAL, Type X 15 |
| 4 | 663557R91 | 4 | BEARING, CONE, 1.625, ID |
| 5 | 87426111 | 4 | HUB, Machined, Inc 6, 7 |
| 6 | 663558R1 | 4 | BEARING, CUP, 2.892, OD |
| 7 | 651817R1 | 4 | BEARING, CUP, 2.33, OD |
| 8 | 219-87 | 4 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 9 | 651818R91 | 4 | BEARING, CONE, 1.25, ID |
| 10 | 469873R1 | 4 | WASHER, 23/32, ID |
| 11 | 70120D | 4 | NUT, SLOTTED, 7/8″-14 |
| 12 | 432-832 | 4 | PIN, SPLIT (COTTER), 1/8″ x 2″ |
| 13 | 224066C1 | 4 | HUB CAP |
| 14 | 277538A1 | 24 | BOLT, Wheel |
| 16 | 10110254 | 4 | WHEEL ASSY., 15 x 10 lb SAE, Silver |
| 17 | 413-1056 | 4 | BOLT, Hex, 5/8″-11 x 3 1/2″, G5 |
| 18 | 86992216 | 4 | NUT, LOCK, 5/8, NC |
09-06 ROCKSHAFT TANDEM 6-BOLT PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 397171A1 | 2 | TUBE, 6-Bolt Tandem Axle Inc. 2, 3, Prior to 2007 Models |
| 1 | 87561153 | 2 | CASTING, 6-Bolt Tandem Axle, Used On 2007 And After Models |
| 2 | 219-86 | 4 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive |
| 3 | 17498D | 4 | BEARING, CUP, 3.000 OD |
| 4 | 21871501 | 4 | BEARING, CONE, 1.50 ID |
| 5 | 21932510 | 4 | SEAL, 2.29 ID |
| 6 | 06400573 | 4 | SPACER, Bearing |
| 7 | 87401183 | 2 | PIN, 1-1/2, Tandem |
| 8 | 14032409 | 2 | NUT, SPECIAL, 1-1/2, Special Jam |
| 9 | 425-146 | 2 | NUT, Jam, 3/8″-16, G5 |
| 10 | 16806045 | 2 | SCREW, 3/8 x 1, Set, Square Head |
| 11 | 413-1240 | 2 | BOLT, Hex, 3/4″-10 x 2 1/2″, G5 |
| 12 | 86992217 | 2 | NUT, LOCK, 3/4, NC |
| 13 | 86990480 | 4 | SPINDLE, 6 Bolt, Prior to 2007 Models |
| 13 | 87517011 | 4 | STUB AXLE/STRG.SPINDLE, 6 Bolt, Used On 2007 And After Models |
| 14 | 594703R1 | 4 | SLEEVE, Wear |
| 15 | 594702R91 | 4 | SEAL, Type X15 |
| 16 | 663557R91 | 4 | BEARING, CONE, 1.625 ID |
| 17 | 87426111 | 4 | HUB, With Cups, Inc. 18, 19 |
| 18 | 663558R1 | 4 | BEARING, CUP, 2.892 OD |
| 19 | 651817R1 | 4 | BEARING, CUP, 2.33 OD |
| 20 | 219-87 | 4 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 21 | 651818R91 | 4 | BEARING, CONE, 1.25 ID |
| 22 | 469873R1 | 4 | WASHER, 23/32 ID |
| 23 | 70120D | 4 | NUT, SLOTTED, 7/8″-14 |
| 24 | 432-832 | 4 | PIN, SPLIT (COTTER), 1/8″ x 2″ |
| 25 | 224066C1 | 4 | HUB CAP |
| 26 | 277538A1 | 24 | BOLT, Wheel |
| 28 | 10110254 | 4 | WHEEL ASSY., 15 x 10 lb SAE, Silver |
| 29 | 413-1072 | 4 | BOLT, Hex, 5/8″-11 x 4 1/2″, G5 |
| 30 | 86992216 | 4 | NUT, LOCK, 5/8, NC |
09-07 ROCKSHAFT TANDEM 8-BOLT PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 394661A1 | 2 | TUBE, 8 Bolt Tandem Axle Inc. 2, Prior to 2007 Models |
| 1 | 87561152 | 2 | CASTING, 8 Bolt Tandem Alxe |
| 2 | 17498D | 4 | BEARING, CUP, 3.000 OD |
| 3 | 219-86 | 4 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive |
| 4 | 21871501 | 4 | BEARING, CONE, 1.50 ID |
| 5 | 21932510 | 4 | SEAL, 2.29 ID |
| 6 | 06400573 | 4 | SPACER, Bearing |
| 7 | 14032409 | 2 | NUT, SPECIAL, 1-1/2, Jam |
| 8 | 425-146 | 2 | NUT, Jam, 3/8″-16, G5 |
| 9 | 16806045 | 2 | SCREW, 3/8 x 1, Set, Square Head |
| 10 | 87401182 | 2 | PIN, 1-1/2, Tandem |
| 11 | 413-1240 | 2 | BOLT, Hex, 3/4″-10 x 2 1/2″, G5 |
| 12 | 86992217 | 2 | NUT, LOCK, 3/4, NC |
| 13 | 86990944 | 4 | SPINDLE, 8 Bolt, Prior to 2007 Models |
| 13 | 87358973 | 4 | SPINDLE, 8 Bolt, Used On 2007 And After Models |
| 14 | 86990965 | 4 | HUB, 8 Bolt, Inc 15 – 20 |
| 15 | 169328C1 | 4 | SLEEVE, Oil Wear Sleeve |
| 16 | 625743C1 | 4 | BEARING, CUP, 3.5433 OD |
| 17 | 663558R1 | 4 | BEARING, CUP, 2.892 OD |
| 18 | 219-87 | 4 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 19 | 366021R2 | 32 | BOLT, Wheel |
| 20 | 554480R1 | 32 | NUT, Wheel |
| 21 | 169329C91 | 4 | SEAL |
| 22 | 625742C1 | 4 | BEARING, CONE, 2.165 ID |
| 23 | 663557R91 | 4 | BEARING, CONE, 1.625 ID |
| 24 | 496-11119 | 4 | WASHER, 1 3/16″ x 2 1/4″ x .134″ HDN |
| 25 | 425-1318 | 4 | NUT, SLOTTED, 1 1/8″-12, G5 |
| 26 | 432-1232 | 4 | PIN, SPLIT (COTTER), 3/16″ x 2″ |
| 27 | 560950R1 | 4 | HUB CAP, Hub |
| 29 | 10110274 | 4 | WHEEL, 15 X 10 lb 8-Bolt, Silver |
| 30 | 413-1072 | 4 | BOLT, Hex, 5/8″-11 x 4 1/2″, G5 |
| 31 | 86992216 | 4 | NUT, LOCK, 5/8, NC |
09-09 WING TANDEM 6-BOLT PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 397171A1 | 1 | TUBE, 6 Bolt Tandem Axle Inc. 2, Prior to 2007 Models |
| 1 | 87561153 | 1 | CASTING, 6 Bolt Tandem Axle, Used On 2007 And After Models |
| 2 | 17498D | 2 | BEARING, CUP, 3.000 OD |
| 3 | 219-86 | 2 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive |
| 4 | 21871501 | 2 | BEARING, CONE, 1.50 ID |
| 5 | 21932510 | 2 | SEAL, 2.29 ID |
| 6 | 06400573 | 2 | SPACER, Bearing |
| 7 | 87401183 | 1 | PIN, 1-1/2, Tandem |
| 8 | 14032409 | 1 | NUT, SPECIAL, 1-1/2, Jam |
| 9 | 425-146 | 1 | NUT, Jam, 3/8″-16, G5 |
| 10 | 16806045 | 1 | SCREW, 3/8 x 1, Set, Square Head |
| 11 | 413-1240 | 1 | BOLT, Hex, 3/4″-10 x 2 1/2″, G5 |
| 12 | 86992217 | 1 | NUT, LOCK, 3/4, NC |
| 13 | 86990480 | 2 | SPINDLE, 6 Bolt, Prior to 2007 Models |
| 13 | 87517011 | 2 | STUB AXLE/STRG.SPINDLE, 6 Bolt, Used On 2007 And After Models |
| 14 | 594703R1 | 2 | SLEEVE, Wear |
| 15 | 594702R91 | 2 | SEAL, Type X15 |
| 16 | 663557R91 | 2 | BEARING, CONE, 1.625 ID |
| 17 | 87426111 | 2 | HUB, Machined, Inc. 18, 19 |
| 18 | 663558R1 | 2 | BEARING, CUP, 2.892 OD |
| 19 | 651817R1 | 2 | BEARING, CUP, 2.33 OD |
| 20 | 219-87 | 2 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 21 | 651818R91 | 2 | BEARING, CONE, 1.25 ID |
| 22 | 469873R1 | 2 | WASHER, 23/32 ID |
| 23 | 70120D | 2 | NUT, SLOTTED, 7/8″-14 |
| 24 | 432-832 | 2 | PIN, SPLIT (COTTER), 1/8″ x 2″ |
| 25 | 224066C1 | 2 | HUB CAP |
| 26 | 277538A1 | 12 | BOLT, Wheel |
| 28 | 10110254 | 2 | WHEEL ASSY., 15 x 10 lb SAE, Silver |
| 28 | 10108254 | 2 | WHEEL, 15 x 8 lb, Silver |
| 29 | 413-1072 | 2 | BOLT, Hex, 5/8″-11 x 4 1/2″, G5 |
| 30 | 86992216 | 2 | NUT, LOCK, 5/8, NC |
09-10 WING TANDEM 8-BOLT PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 394661A1 | 1 | TUBE, 8 Bolt Tandem Axle, Inc. 2, Prior to 2007 Models |
| 1 | 87561152 | 1 | CASTING, 8 Bolt Tandem Axle, Used On 2007 And After Models |
| 2 | 17498D | 2 | BEARING, CUP, 3.000 OD |
| 3 | 219-86 | 2 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive |
| 4 | 21871501 | 2 | BEARING, CONE, 1.50 ID |
| 5 | 21932510 | 2 | SEAL, 2.29 ID |
| 6 | 06400573 | 2 | SPACER, Bearing |
| 7 | 14032409 | 1 | NUT, SPECIAL, 1-1/2, Jam, Special |
| 8 | 425-146 | 1 | NUT, Jam, 3/8″-16, G5 |
| 9 | 16806045 | 1 | SCREW, 3/8 x 1, Set, Square Head |
| 10 | 87401182 | 1 | PIN, 1-1/2, Tandem |
| 11 | 413-1240 | 1 | BOLT, Hex, 3/4″-10 x 2 1/2″, G5 |
| 12 | 86992217 | 1 | NUT, LOCK, 3/4, NC |
| 13 | 86990944 | 2 | SPINDLE, 8 Bolt, Prior to 2007 Models |
| 13 | 87358973 | 2 | SPINDLE, 8 Bolt, Used On 2007 And After Models |
| 14 | 86990965 | 2 | HUB, 8 Bolt, Inc. 15 – 20 |
| 15 | 169328C1 | 2 | SLEEVE, Oil Wear |
| 16 | 625743C1 | 2 | BEARING, CUP, 3.5433 OD |
| 17 | 663558R1 | 2 | BEARING, CUP, 2.892 OD |
| 18 | 219-87 | 2 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 19 | 366021R2 | 16 | BOLT, Wheel |
| 20 | 554480R1 | 16 | NUT, Wheel |
| 21 | 169329C91 | 2 | SEAL |
| 22 | 625742C1 | 2 | BEARING, CONE, 2.165 ID |
| 23 | 663557R91 | 2 | BEARING, CONE, 1.625 ID |
| 24 | 496-11119 | 2 | WASHER, 1 3/16″ x 2 1/4″ x .134″ HDN |
| 25 | 425-1318 | 2 | NUT, SLOTTED, 1 1/8″-12, G5 |
| 26 | 432-1232 | 2 | PIN, SPLIT (COTTER), 3/16″ x 2″ |
| 27 | 560950R1 | 2 | HUB CAP, Hub |
| 29 | 10110274 | 2 | WHEEL, 15 x 10 lb 8 Bolt, Silver |
| 30 | 413-1072 | 2 | BOLT, Hex, 5/8″-11 x 4 1/2″, G5 |
| 31 | 86992216 | 2 | NUT, LOCK, 5/8, NC |
09-11 SPRING LEVELING PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 443059A1 | 1 | TUBE, Leveling, 19 – 22 ft |
| 1 | 441624A1 | 1 | TUBE, Leveling, 25 – 31 ft |
| 1 | 450543A1 | 1 | TUBE, Leveling, 34 ft |
| 2 | 450541A1 | 1 | SCREW, ADJUSTMENT, Threaded, Leveling |
| 3 | 446677A1 | 2 | SPRING, Hitch |
| 4 | 446676A1 | 1 | TRUNNION, Hitch Screw |
| 5 | 147968C1 | 2 | SPACER, Spring |
| 6 | 495-81301 | 4 | WASHER, 1 9/32″ x 3″ x 1/4″ |
| 7 | 425-1420 | 2 | NUT, Jam, 1 1/4″-7, G5 |
| 8 | 425-1020 | 1 | NUT, 1 1/4″-7, G5 |
| 9 | 447406A1 | 1 | NUT, 1-1/4, Hex with set screw hole |
| 10 | 16806045 | 1 | SCREW, 3/8 x 1, Square Head |
| 11 | 87339 | 1 | BOLT, Hex, 1/2″-13 x 3″, G5 |
| 12 | 86992215 | 1 | NUT, LOCK, 1/2, NC |
| 13 | 438-11624 | 1 | PIN, LOCK, 1/4″ x 1 1/2″, Slotted, 1/4″ x 1 1/2″, Slotted |
| 14 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 15 | 87401106 | 1 | CRANK, Bell, LH |
| 16 | 87401107 | 1 | CRANK, Bell, RH |
| 17 | 447862A1 | 2 | TUBE, Leveling |
| 18 | 413-1296 | 2 | BOLT, Hex, 3/4″-10 x 6″, G5, 3/4 x 6, NC, gr 5 |
| 19 | 86992217 | 2 | NUT, LOCK, 3/4, NC |
| 20 | 86989785 | 1 | PIN, 1-1/4 x 187 mm |
| 21 | 496-81009 | 2 | WASHER, 1 5/16″ x 1 63/64″ x .180″, HDN, 1-1/4 |
| 22 | 438-12036 | 2 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
| 23 | 427-20500 | 1 | PIN, CLEVIS, 1 1/4″ x 5″ |
| 24 | 496-81009 | 1 | WASHER, 1 5/16″ x 1 63/64″ x .180″, HDN |
| 25 | 432-1632 | 1 | PIN, SPLIT (COTTER), 1/4″ x 2″ |
09-12 SINGLE POINT DEPTH CONTROL PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 441965A1 | 1 | TUBE, Inc. 2 |
| 2 | 87414072 | 1 | DECAL, Depth |
| 3 | 87419276 | 1 | TUBE, Depth Control, 19 – 22 ft |
| 3 | 87419275 | 1 | TUBE, Depth Control, 25 – 31 ft |
| 3 | 441967A1 | 1 | TUBE, Depth Control, 34 ft, Inc. 4 |
| 4 | 1978881C1 | 1 | DECAL, Depth Control |
| 5 | 87412274 | 1 | HANDLE, Crank |
| 6 | 87412462 | 1 | ANGLE, Bolt On |
| 7 | 425-108 | 1 | NUT, 1/2″-13, G5 |
| 8 | 425-148 | 1 | NUT, Jam, 1/2″-13, G5 |
| 9 | 413-840 | 1 | BOLT, Hex, 1/2″-13 x 2 1/2″, G5 |
| 10 | 86992215 | 1 | NUT, LOCK, 1/2, NC |
| 11 | 396153A1 | 1 | PIN, Hydraulic Depth Valve |
| 12 | 100-3375 | 1 | RING, LOCKING, #75, .574″ Dia, E-Type |
| 12 | 50526 | 1 | No Description/Retired, , Used On 2008 And After Models |
| 13 | 396152A1 | 1 | COMPRESSION SPRING, Hydraulic Depth Valve |
| 14 | 87381 | 1 | WASHER, 3/4″, SAE |
| 15 | 333026A1 | 1 | BRACKET, Depth Control |
| 15 | 87519377 | 1 | U-BRACKET, Depth Control, Used On Serial Number JFH0031778 And After |
| 16 | 87417259 | 2 | SPACER |
| 17 | 86992213 | 2 | NUT, LOCK, 3/8 |
| 18 | 413-656 | 2 | BOLT, Hex, 3/8″-16 x 3 1/2″, G5 |
| 19 | 439-5828 | 1 | PIN, HEADED, 1/2″ x 1 3/4″ |
| 20 | 495-11053 | 1 | WASHER, 1/2″, SAE |
| 21 | 432-1216 | 1 | PIN, SPLIT (COTTER), 3/16″ x 1″ |
09-13 CENTER SHANK ASSEMBLY PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 06403000 | 1 | MOUNTING PARTS, Shank (Does Not Include Items 6, 7, 16, 23) |
| 1 | 06403260 | 1 | MOUNTING PARTS, Shank (Does Not Include Items 7, 15, 16, 23) |
| 4 | 20090192 | 1 | SPRING, Spring Pivot |
| 5 | 06210150 | 1 | BRACKET |
| 6 | 33017584 | 1 | SHANK, BUCKET TOOTH |
| 7 | 372561A1 | 1 | SWEEP, 9.3 in Maxi |
| 8 | 24143895 | 1 | SPRING, COMPRESSION |
| 9 | 06403415 | 1 | BUSHING, Heat Treated |
| 10 | 44008755 | 1 | BUSHING, 7/8 ID Connex |
| 11 | 06403310 | 1 | BUSHING, Heat Treated |
| 12 | 17411011 | 1 | WASHER, 5/8 Flat |
| 14 | 17409010 | 1 | WASHER, 9/16 ID x 1-3/8 OD |
| 15 | 495-21050 | 2 | WASHER, 7/16″, Flat |
| 16 | 419-3724 | 2 | BOLT, PLOW, 7/16″-14 x 1 1/2″, G5 |
| 17 | 16908445 | 1 | BOLT, 1/2 x 11, NC, Hex, gr 5 |
| 18 | 16908145 | 2 | BOLT, 1/2 x 3-1/2, NC, Hex, gr 5 |
| 19 | 413-1096 | 1 | BOLT, Hex, 5/8″-11 x 6″, G5 |
| 20 | 26-1032 | 1 | BOLT, Hex, 5/8″-11 x 2″, G8 |
| 21 | 86992215 | 2 | NUT, LOCK, 1/2, NC |
| 22 | 86992216 | 1 | NUT, LOCK, 5/8, NC |
| 23 | 425-107 | 2 | NUT, 7/16″-14, G5 |
| 24 | 425-1010 | 1 | NUT, 5/8″-11, G5 |
| 25 | 16908148 | 1 | BOLT, 1/2, Flanged Head, gr 8 |
| 26 | 14120801 | 1 | NUT, LOCK, 1/2, Flanged, gr 8 |
09-14 GANG TUBE PARTS 19 – 31 FT TANDEM DISK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 443126A1 | 1 | TUBE, Main Gang, Front, LH, 19 – 22 ft |
| 1 | 443127A1 | 1 | TUBE, Main Gang, Front, RH, 19 – 22 ft |
| 1 | 441758A1 | 1 | BAR ASSY., Main Gang, Front, LH, 25 – 31 ft |
| 1 | 441759A1 | 1 | BAR ASSY., Main Gang, Front, RH, 25 – 31 ft |
| 2 | 87710097 | 1 | TUBE, RIGID, Wing Gang, Front, LH, 19 ft |
| 2 | 87710096 | 1 | TUBE, RIGID, Wing Gang, Front, RH, 19 ft |
| 2 | 87711269 | 1 | TUBE, RIGID, Wing Gang, Front, Lh, 22 ft |
| 2 | 87711266 | 1 | TUBE, RIGID, Wing Gang, Front, Rh, 22 ft |
| 2 | 87400466 | 1 | TUBE, Wing Gang, Front, LH, 25 ft |
| 2 | 87400467 | 1 | TUBE, Wing Gang, Front, RH, 25 ft |
| 2 | 86985979 | 1 | TUBE, Wing Gang, Front, LH, 28 ft, Used On 2007 And Prior Models |
| 2 | 87710356 | 1 | TUBE, RIGID, Wing Gang, Front, Lh 28 ft, Used On 2008 And After Models |
| 2 | 86985980 | 1 | TUBE, Wing Gang, Front, RH, 28 ft, Used On 2007 And Prior Models |
| 2 | 87710357 | 1 | TUBE, RIGID, Wing Gang, Front Rh, 28 ft, Used On 2008 And After Models |
| 2 | 86985984 | 1 | TUBE, Wing Gang, Front, LH, 31 ft |
| 2 | 86985985 | 1 | TUBE, Wing Gang, Front, RH, 31 ft |
| 3 | 443128A1 | 1 | TUBE, Main Gang, Rear, LH, 19 – 22 ft |
| 3 | 443129A1 | 1 | TUBE, Main Gang, Rear, RH, 19 – 22 ft |
| 3 | 441758A1 | 1 | BAR ASSY., Main Gang, Rear, RH, 25 – 31 ft |
| 3 | 441759A1 | 1 | BAR ASSY., Main Gang, Rear, LH, 25 – 31 ft |
| 4 | 443210A1 | 1 | TUBE, Wing Gang, Rear, LH, 19 ft |
| 4 | 443211A1 | 1 | TUBE, Wing Gang, Rear, RH, 19 ft |
| 4 | 443212A1 | 1 | TUBE, Wing Gang, Rear, LH, 22 – 25 ft |
| 4 | 443213A1 | 1 | TUBE, Wing Gang, Rear, RH, 22 – 25 ft |
| 4 | 443228A1 | 1 | TUBE, Wing Gang, Rear, LH, 28 ft |
| 4 | 443229A1 | 1 | TUBE, Wing Gang, Rear, RH, 28 ft |
| 4 | 443230A1 | 1 | TUBE, Wing Gang, Rear, LH, 31 ft |
| 4 | 443231A1 | 1 | TUBE, Wing Gang, Rear, RH, 31 ft |
| 5 | 413-1436 | 24 | BOLT, Hex, 7/8″-9 x 2 1/4″, G5 |
| 6 | 86992218 | 24 | NUT, LOCK, 7/8, NC |
| 7 | 413-1244 | 8 | BOLT, Hex, 3/4″-10 x 2 3/4″, G5 |
| 8 | 86992217 | 8 | NUT, LOCK, 3/4, NC |
| 9 | 219-87 | 4 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 10 | 396921A1 | 4 | BOLT, 1-1/4 x 11-1/2, NC, gr 5 |
| 11 | 496-81009 | 8 | WASHER, 1 5/16″ x 1 63/64″ x .180″, HDN |
| 12 | 86992220 | 4 | NUT, LOCK, 1-1/4, NC |
09-15 GANG TUBE PARTS 34 FT TANDEM DISK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 448644A1 | 1 | TUBE, Main Gang, Front, LH |
| 1 | 448645A1 | 1 | TUBE, Main Gang, Front, RH |
| 2 | 86985984 | 1 | TUBE, Wing Gang, Front, LH |
| 2 | 86985985 | 1 | TUBE, Wing Gang, Front, RH |
| 3 | 87403194 | 1 | TUBE, Main Gang, Rear, LH |
| 3 | 87403195 | 1 | TUBE ASSY., Main Gang, Rear, RH |
| 4 | 443230A1 | 1 | TUBE, Wing Gang, Rear, LH |
| 4 | 443231A1 | 1 | TUBE, Wing Gang, Rear, RH |
| 5 | 413-1436 | 32 | BOLT, Hex, 7/8″-9 x 2 1/4″, G5 |
| 6 | 86992218 | 32 | NUT, LOCK, 7/8, NC |
| 7 | 413-1244 | 8 | BOLT, Hex, 3/4″-10 x 2 3/4″, G5 |
| 8 | 86992217 | 8 | NUT, LOCK, 3/4, NC |
| 9 | 219-87 | 4 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 10 | 396921A1 | 4 | BOLT, 1-1/4 x 11-1/2, NC, gr 5 |
| 11 | 496-81009 | 8 | WASHER, 1 5/16″ x 1 63/64″ x .180″, HDN |
| 12 | 86992220 | 4 | NUT, LOCK, 1-1/4, NC |
09-16 7-1/2 IN RIGID MAIN GANG PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1263536C6 | 1 | BOLT, SPECIAL, Arbor, 7 Blades, 19 – 22 ft |
| 1 | 1263613C5 | 1 | BOLT, SPECIAL, Arbor, 9 Blades, 25 – 31 ft |
| 1 | 1263614C5 | 1 | BOLT, SPECIAL, Arbor, 11 Blades, 34 ft |
| 1 | 1986269C5 | 1 | BOLT, SPECIAL, Arbor, 12 Blades, 34 ft |
| 2 | 1344908C1 | 1 | WASHER, Bumper |
| 13 | 139773C1 | 1 | SPACER, End |
| 15 | 425-1224 | 1 | NUT, SLOTTED, 1 1/2″-6, G5 |
| 16 | 438-12036 | 1 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
09-17 9 IN RIGID MAIN GANG PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1263536C6 | 4 | BOLT, SPECIAL, Arbor, 6 Blades, 19 – 22 ft |
| 1 | 1263537C6 | 2 | BOLT, SPECIAL, Arbor, 7 Blades, 25 – 31 ft |
| 1 | 1263538C6 | 2 | BOLT, SPECIAL, Arbor, 8 Blades, 25 – 31 ft |
| 1 | 1263539C6 | 2 | BOLT, SPECIAL, Arbor, 9 Blades, 34 ft |
| 1 | 1263540C6 | 2 | BOLT, SPECIAL, Arbor, 10 Blades, 34 ft |
| 2 | 1344908C1 | 1 | WASHER, Bumper |
| 13 | 139773C1 | 1 | SPACER, End |
| 15 | 425-1224 | 1 | NUT, SLOTTED, 1 1/2″-6, G5 |
| 16 | 438-12036 | 1 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
09-18 7-1/2 IN CUSHION MAIN GANG PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1263536C6 | 1 | BOLT, SPECIAL, Arbor, 7 Blades, 19 – 22 ft |
| 1 | 1263613C5 | 1 | BOLT, SPECIAL, Arbor, 9 Blades, 25 – 31 ft |
| 1 | 1263614C5 | 1 | BOLT, SPECIAL, Arbor, 11 Blades, 34 ft |
| 1 | 1986269C5 | 1 | BOLT, SPECIAL, Arbor, 12 Blades, 34 ft |
| 2 | 1344908C1 | 1 | WASHER, Bumper |
| 18 | 139773C1 | 1 | SPACER, End |
| 20 | 425-1224 | 1 | NUT, SLOTTED, 1 1/2″-6, G5 |
| 21 | 438-12036 | 1 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
09-19 9 IN CUSHION MAIN GANG PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1263536C6 | 1 | BOLT, SPECIAL, Arbor, 6 Blades, 19 – 22 ft |
| 1 | 1263537C6 | 1 | BOLT, SPECIAL, Arbor, 7 Blades, 25 – 31 ft |
| 1 | 1263538C6 | 1 | BOLT, SPECIAL, Arbor, 8 Blades, 25 – 31 ft |
| 1 | 1263539C6 | 1 | BOLT, SPECIAL, Arbor, 9 Blades, 34 ft |
| 1 | 1263540C6 | 1 | BOLT, SPECIAL, Arbor, 10 Blades, 34 ft |
| 18 | 139773C1 | 1 | SPACER, End |
| 20 | 425-1224 | 1 | NUT, SLOTTED, 1 1/2″-6, G5 |
| 21 | 438-12036 | 1 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
09-20 7-1/2 IN RIGID WING GANG PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1263612C5 | 1 | BOLT, SPECIAL, Arbor, 8 Blades, 19 ft 31 – 34 ft |
| 1 | 1263613C5 | 1 | BOLT, SPECIAL, Arbor, 9 Blades, 19 ft 31 ft |
| 1 | 1986246C5 | 1 | BOLT, SPECIAL, Arbor, 10 Blades, 31 – 34 ft |
| 1 | 1263614C5 | 1 | BOLT, SPECIAL, Arbor, 11 Blades, 22 – 25 ft |
| 1 | 1986269C5 | 1 | BOLT, SPECIAL, Arbor, 12 Blades, 22 – 25 ft |
| 1 | 1263616C4 | 1 | BOLT, SPECIAL, Arbor, 14 Blades, 28 ft |
| 1 | 1986270C5 | 1 | BOLT, SPECIAL, Arbor, 15 Blades, 28 ft |
| 2 | 139773C1 | 2 | SPACER, End |
| 21 | 425-1224 | 1 | NUT, SLOTTED, 1 1/2″-6, G5 |
| 22 | 438-12036 | 1 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
09-21 9 IN RIGID WING GANG PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1263536C6 | 1 | BOLT, SPECIAL, Arbor, 6 Blades, 31 – 34 ft |
| 1 | 1263537C6 | 1 | BOLT, SPECIAL, Arbor, 7 Blades, 19 ft 31 – 34 ft |
| 1 | 1263538C6 | 1 | BOLT, SPECIAL, Arbor, 8 Blades, 19 ft 31 – 34 ft |
| 1 | 1263539C6 | 1 | BOLT, SPECIAL, Arbor, 9 Blades, 22 – 25 ft |
| 1 | 1263540C6 | 1 | BOLT, SPECIAL, Arbor, 10 Blades, 22 ft |
| 1 | 1263541C6 | 1 | BOLT, SPECIAL, Arbor, 11 Blades, 25 – 28 ft |
| 1 | 1986271C5 | 1 | BOLT, SPECIAL, Arbor, 13 Blades, 28 ft |
| 2 | 1344908C1 | 2 | WASHER, Bumper |
| 21 | 425-1224 | 1 | NUT, SLOTTED, 1 1/2″-6, G5 |
| 22 | 438-12036 | 1 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
09-22 7-1/2 IN CUSHION WING GANG PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1263612C5 | 1 | BOLT, SPECIAL, Arbor, 8 Blades, 19 ft, 31 – 34 ft |
| 1 | 1263613C5 | 1 | BOLT, SPECIAL, Arbor, 9 Blades, 19 ft, 31 ft |
| 1 | 1986246C5 | 1 | BOLT, SPECIAL, Arbor, 10 Blades, 31 – 34 ft |
| 1 | 1263614C5 | 1 | BOLT, SPECIAL, Arbor, 11 Blades, 22 – 25 ft |
| 1 | 1986269C5 | 1 | BOLT, SPECIAL, Arbor, 12 Blades, 22 – 25 ft |
| 1 | 1263616C4 | 1 | BOLT, SPECIAL, Arbor, 14 Blades, 28 ft |
| 1 | 1986270C5 | 1 | BOLT, SPECIAL, Arbor, 15 Blades, 28 ft |
| 2 | 139773C1 | 2 | SPACER, End |
| 19 | 425-1224 | 1 | NUT, SLOTTED, 1 1/2″-6, G5 |
| 20 | 438-12036 | 1 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
09-23 9 IN CUSHION WING GANG PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1263536C6 | 1 | BOLT, SPECIAL, Arbor, 6 Blades, 31 – 34 ft |
| 1 | 1263537C6 | 1 | BOLT, SPECIAL, Arbor, 7 Blades, 19 ft, 31 – 34 ft |
| 1 | 1263538C6 | 1 | BOLT, SPECIAL, Arbor, 8 Blades, 19 ft, 31 – 34 ft |
| 1 | 1263539C6 | 1 | BOLT, SPECIAL, Arbor, 9 Blades, 22 – 25 ft |
| 1 | 1263540C6 | 1 | BOLT, SPECIAL, Arbor, 10 Blades, 22 ft |
| 1 | 1263541C6 | 1 | BOLT, SPECIAL, Arbor, 11 Blades, 25 – 28 ft |
| 1 | 1986271C5 | 1 | BOLT, SPECIAL, Arbor, 13 Blades, 28 ft |
| 2 | 1344908C1 | 2 | WASHER, Bumper |
| 19 | 425-1224 | 1 | NUT, SLOTTED, 1 1/2″-6, G5 |
| 20 | 438-12036 | 1 | PIN, LOCK, 5/16″ x 2 1/4″, Slotted |
09-24 7-1/2 IN MAIN GANG SCRAPER PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87405845 | 1 | ANGLE, Scraper, 7 Blades, 7 Scrapers, 19 – 22 ft, Front, LH |
| 1 | 87405844 | 1 | ANGLE, Scraper, 9 Blades, 9 Scrapers, 25 – 31 ft, Front, LH |
| 1 | 87405847 | 1 | ANGLE, Scraper, 12 Blades, 12 Scrapers, 34 ft, Front, LH |
| 2 | 87405845 | 1 | ANGLE, Scraper, 7 Blades, 7 Scrapers, 19 – 22 ft, Front, RH |
| 2 | 87405844 | 1 | ANGLE, Scraper, 9 Blades, 9 Scrapers, 25 – 31 ft, Front, RH |
| 2 | 87405847 | 1 | ANGLE, Scraper, 12 Blades, 12 Scrapers, 34 ft, Front, RH |
| 3 | 87405849 | 1 | ANGLE, Scraper, 7 Blades, 6 Scrapers, 19 – 22 ft, Rear, RH |
| 3 | 87408092 | 1 | ANGLE, Scraper, 9 Blades, 8 Scrapers, 25 – 31 ft, Rear, RH |
| 3 | 87405846 | 1 | ANGLE, Scraper, 11 Blades, 10 Scrapers, 34 ft, Rear, RH |
| 4 | 87405853 | 1 | ANGLE, Scraper, 7 Blades, 6 Scrapers, 19 – 22 ft, Rear, LH |
| 4 | 87408093 | 1 | ANGLE, Scaper, 9 Blades, 8 Scrapers, 25 – 31 ft, Rear, LH |
| 4 | 87405851 | 1 | ANGLE, Scraper, 11 Blades, 10 Scrapers, 34 ft, Rear, LH |
09-25 9 IN MAIN GANG SCRAPER PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87403308 | 1 | ANGLE, Scraper, 6 Blades, 6 Scrapers, 19 – 22 ft, Front, LH |
| 1 | 87403924 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 25 – 31 ft, Front, LH |
| 1 | 87403315 | 1 | ANGLE, Scraper, 10 Blades, 10 Scrapers, 34 ft, Front, LH |
| 2 | 87403308 | 1 | ANGLE, Scraper, 6 Blades, 6 Scrapers, 19 – 22 ft, Front, RH |
| 2 | 87403924 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 25 – 31 ft, Front, RH |
| 2 | 87403315 | 1 | ANGLE, Scraper, 10 Blades, 10 Scrapers, 34 ft, Front, RH |
| 3 | 87408095 | 1 | ANGLE, Scraper, 6 Blades, 5 Scrapers, 19 – 22 ft, Rear, RH |
| 3 | 87403309 | 1 | ANGLE, Scraper, 7 Blades, 6 Scrapers, 25 – 31 ft, Rear, RH |
| 3 | 87403313 | 1 | ANGLE, Scraper, 9 Blades, 8 Scrapers, 34 ft, Rear, RH |
| 4 | 87408096 | 1 | ANGLE, Scraper, 6 Blades, 5 Scrapers, 19 – 22 ft, Rear, LH |
| 4 | 87403310 | 1 | ANGLE, Scraper, 7 Blades, 6 Scrapers, 25 – 31 ft, Rear, LH |
| 4 | 87403314 | 1 | ANGLE, Scraper, 9 Blades, 8 Scrapers, 34 ft, Rear, LH |
09-26 7-1/2 IN WING GANG SCRAPER PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87405848 | 1 | ANGLE, Scraper, 8 Blades, 7 Scrapers, 19 ft, Front, LH |
| 1 | 87408101 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 31 – 34 ft, Front, LH |
| 1 | 87405846 | 1 | ANGLE, Scraper, 11 Blades, 10 Scrapers, 22 – 25 ft, Front, LH |
| 1 | 87408098 | 1 | ANGLE, Scraper, 14 Blades, 13 Scrapers, 28 ft, Front, LH |
| 2 | 87405852 | 1 | ANGLE, Scraper, 8 Blades, 7 Scrapers, 19 ft, Front, RH |
| 2 | 87408101 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 31 – 34 ft, RH |
| 2 | 87405851 | 1 | ANGLE, Scraper, 11 Blades, 10 Scrapers, 22 – 25 ft, Front, RH |
| 2 | 87408099 | 1 | ANGLE, Scraper, 14 Blades, 13 Scrapers, 28 ft, Front, RH |
| 3 | 87408101 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 31 – 34 ft, Rear, RH |
| 3 | 87405844 | 1 | ANGLE, Scraper, 9 Blades, 9 Scrapers, 19 ft, Rear, RH |
| 3 | 87405847 | 1 | ANGLE, Scraper, 12 Blades, 12 Scrapers, 22 – 25 ft, Rear, RH |
| 3 | 87408097 | 1 | ANGLE, Scraper, 15 Blades, 15 Scrapers, 28 ft, Rear, RH |
| 4 | 87408101 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 31 – 34 ft, Rear, LH |
| 4 | 87405844 | 1 | ANGLE, Scraper, 9 Blades, 9 Scrapers, 19 ft, Rear, LH |
| 4 | 87405847 | 1 | ANGLE, Scraper, 12 Blades, 12 Scapers, 22 – 25 ft, Rear, LH |
| 4 | 87408097 | 1 | ANGLE, Scraper, 15 Blades, 15 Scrapers, 28 ft, Rear, LH |
| 5 | 87405848 | 1 | ANGLE, Scraper, 8 Blades, 7 Scrapers, 34 ft, Front, LH |
| 5 | 87408092 | 1 | ANGLE, Scraper, 9 Blades, 8 Scrapers, 31 ft, Front, LH |
| 6 | 87405852 | 1 | ANGLE, Scraper, 8 Blades, 7 Scrapers, 34 ft, Front, RH |
| 6 | 87408093 | 1 | ANGLE, Scraper, 9 Blades, 8 Scrapers, 31 ft, Front, RH |
| 7 | 87408100 | 1 | ANGLE, Scraper, 10 Blades, 10 Scrapers, 31 – 34 ft, Rear, RH |
| 8 | 87408100 | 1 | ANGLE, Scraper, 10 Blades, 10 Scrapers, 31 – 34 ft, Rear, LH |
09-27 9 IN WING GANG SCRAPER PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87403308 | 1 | ANGLE, Scraper, 6 Blades, 6 Scrapers, 31 – 34 ft, Front, LH |
| 1 | 87403309 | 1 | ANGLE, Scraper, 7 Blades, 6 Scrapers, 19 ft, Front, LH |
| 1 | 87403313 | 1 | ANGLE, Scraper, 9 Blades, 8 Scrapers, 22 – 25 ft, Front, LH |
| 1 | 87408103 | 1 | ANGLE, Scraper, 11 Blades, 10 Scrapers, 28 ft, Front, LH |
| 2 | 87403308 | 1 | ANGLE, Scraper, 6 Blades, 6 Scrapers, 31 – 34 ft, Front, RH |
| 2 | 87403310 | 1 | ANGLE, Scraper, 7 Blades, 6 Scrapers, 19 ft, Front, RH |
| 2 | 87403314 | 1 | ANGLE, Scraper, 9 Blades, 8 Scrapers, 22 – 25 ft, Front, RH |
| 2 | 87408104 | 1 | ANGLE, Scraper, 11 Blades, 10 Scrapers, 28 ft, Front, RH |
| 3 | 87403317 | 1 | ANGLE, Scraper, 7 Blades, 7 Scrapers, 31 – 34 ft, Rear, RH |
| 3 | 87403924 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 19 ft, Rear, RH |
| 3 | 87403315 | 1 | ANGLE, Scraper, 10 Blades, 10 Scrapers, 22 ft, Rear, RH |
| 3 | 87405838 | 1 | ANGLE, Scraper, 11 Blades, 11 Scrapers, 25 ft, Rear, RH |
| 3 | 87408102 | 1 | ANGLE, Scraper, 13 Blades, 13 Scrapers, 28 ft, Rear, RH |
| 4 | 87403317 | 1 | ANGLE, Scraper, 7 Blades, 7 Scrapers, 31 – 34 ft, Rear, LH |
| 4 | 87403924 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 19 ft, Rear, LH |
| 4 | 87403315 | 1 | ANGLE, Scraper, 10 Blades, 10 Scrapers, 22 ft, Rear, LH |
| 4 | 87405838 | 1 | ANGLE, Scraper, 11 Blades, 11 Scrapers, 25 ft, Rear, LH |
| 4 | 87408102 | 1 | ANGLE, Scraper, 13 Blades, 13 Scrapers, 28 ft, Rear, LH |
| 5 | 87403309 | 1 | ANGLE, Scraper, 7 Blades, 6 Scrapers, 31 – 34 ft, Front, LH |
| 6 | 87403310 | 1 | ANGLE, Scraper, 7 Blades, 6 Scrapers, 31 – 34 ft, Front, RH |
| 7 | 87403924 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 31 – 34 ft, Rear, RH |
| 8 | 87403924 | 1 | ANGLE, Scraper, 8 Blades, 8 Scrapers, 31 – 34 ft, Rear, LH |
09-28 GAUGE WHEEL PARTS 2007 AND PRIOR UNITS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 444575A1 | 1 | BRACKET, Gauge Wheel Mount, LH |
| 1 | 444576A1 | 1 | BRACKET, Gauge Wheel Mount, RH |
| 2 | 447279A1 | 1 | SPACER, Bolt |
| 3 | 87413344 | 1 | SPINDLE, Weldment |
| 4 | 472221R91 | 1 | SEAL |
| 5 | 651818R91 | 1 | BEARING, CONE, 1.25 Bore |
| 6 | 87419424 | 1 | HUB, 6-Bolt Hub, Light, Inc. 7 , 8 |
| 7 | 651817R1 | 1 | BEARING, CUP, 2.33 OD |
| 8 | 651814R1 | 1 | BEARING, CUP, 1.7810 OD |
| 9 | 651815R91 | 1 | BEARING, CONE, 75 Bore |
| 10 | 369857R1 | 1 | WASHER, 25/32 x 1-1/4, 11 ga |
| 11 | 425-1312 | 1 | NUT, SLOTTED, 3/4″-16, G5, 3/4, NF, Slotted, gr 5 |
| 12 | 432-824 | 1 | PIN, SPLIT (COTTER), 1/8″ x 1 1/2″ |
| 13 | B13280 | 1 | HUB CAP |
| 14 | 277538A1 | 6 | BOLT, Wheel |
| 15 | 10106202 | 1 | WHEEL ASSY., 10 x 6 JA, Silver |
| 16 | 14816348 | 1 | PIN |
| 17 | A30338 | 1 | PIN, Klik, 1/4 x 1-3/4 |
| 18 | 413-12120 | 2 | BOLT, Hex, 3/4″-10 x 7 1/2″, G5, 3/4 x 7-1/2, NC, gr 5 |
| 19 | 86992217 | 2 | NUT, LOCK, 3/4, NC |
09-29 GAUGE WHEEL PARTS 2008 AND AFTER UNITS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87604180 | 1 | WHEEL, IDLER, Mount, Gauge, Wheel |
| 2 | 87604184 | 1 | BRACKET, Gauge Wheel |
| 3 | 87604185 | 1 | PIVOT, Weld |
| 4 | 87604193 | 1 | JACK, Screw, Used On 2008 And After Models |
| 4 | 84163961 | 1 | JACK, Screw, Used On 2009 And After Models |
| 5 | 87681851 | 1 | BRACKET, Mount Gauge Wheel |
| 6 | 87451736 | 1 | WHEEL ASSY., 7.6 x 15, Tube Silver |
| 8 | 495-81074 | 2 | WASHER, 1 1/32″ x 1 3/4″ x .120″ |
| 9 | 86992219 | 1 | NUT, LOCK, 1, Stover |
| 10 | 14816348 | 1 | PIN |
| 11 | A30338 | 1 | PIN, Klick |
| 12 | 413-1060 | 1 | BOLT, Hex, 5/8″-11 x 3 3/4″, G5 |
| 13 | 86992216 | 1 | NUT, LOCK, Stover, 5/8 |
| 14 | 413-852 | 1 | BOLT, Hex, 1/2″-13 x 3 1/4″, G5 |
| 15 | 86992215 | 1 | NUT, LOCK, Stover, 1/2 |
| 16 | 87698627 | 1 | BRACKET, Flat Mount |
| 17 | 413-1288 | 6 | BOLT, Hex, 3/4″-10 x 5 1/2″, G5 |
| 18 | 86992217 | 6 | NUT, LOCK, Stover, 3/4 |
09-30 PIVOT STABALIZING WHEEL
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87604180 | 1 | WHEEL, IDLER, Mount Gauge Wheel |
| 2 | 87604184 | 1 | BRACKET, Gauge Wheel |
| 3 | 87604185 | 1 | PIVOT, Weld |
| 4 | 84163961 | 1 | JACK, Screw |
| 5 | 87681851 | 1 | BRACKET, Mount Gauge Wheel |
| 6 | 87451736 | 1 | WHEEL ASSY., 7.6 15, Tube, Silver |
| 8 | 495-81074 | 2 | WASHER, 1 1/32″ x 1 3/4″ x .120″ |
| 9 | 86992219 | 1 | NUT, LOCK, 1, Stover |
| 10 | 14816348 | 1 | PIN |
| 11 | A30338 | 1 | PIN, Klik |
| 12 | 413-1060 | 1 | BOLT, Hex, 5/8″-11 x 3 3/4″, G5 |
| 13 | 86992216 | 1 | NUT, LOCK, Stover, 5/8 |
| 14 | 413-852 | 1 | BOLT, Hex, 1/2″-13 x 3 1/4″, G5 |
| 15 | 86992215 | 1 | NUT, LOCK, 1/2, Stover |
| 16 | 87698627 | 1 | BRACKET, Flat Mount |
| 17 | 413-1288 | 6 | BOLT, Hex, 3/4″-10 x 5 1/2″, G5 |
| 18 | 86992217 | 6 | NUT, LOCK |
09-31 REAR HITCH PARTS PRIOR TO 2005 MODELS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86991549 | 1 | HITCH, Rear, 25 ft |
| 1 | 86991550 | 1 | HITCH, Rear, 28 – 34 ft |
| 2 | 311864A1 | 2 | REFLECTOR, Yellow |
| 3 | 87418301 | 1 | SUPPORT, Tank Hitch |
| 4 | A33497 | 1 | PIN, LINCH, Klik, 3/16 x 1-1/4 |
| 5 | 87418302 | 1 | LATCH ASSY., Tank Hitch |
| 6 | 495-11053 | 1 | WASHER, 1/2″, SAE |
| 7 | 1986194C1 | 1 | SPRING, Tank |
| 8 | 495-11106 | 1 | WASHER, 1″, SAE |
| 9 | 413-16112 | 1 | BOLT, Hex, 1″-8 x 7″, G5 |
| 10 | 86992219 | 1 | NUT, LOCK, 1, NC |
| 11 | 87418303 | 1 | GUIDE, Tongue |
| 12 | 87418304 | 1 | TONGUE, Hitch |
| 13 | 413-16112 | 1 | BOLT, Hex, 1″-8 x 7″, G5 |
| 14 | 86992219 | 1 | NUT, LOCK, 1, NC |
| 15 | 413-1228 | 4 | BOLT, Hex, 3/4″-10 x 1 3/4″, G5 |
| 16 | 86992217 | 4 | NUT, LOCK, 3/4, NC |
| 17 | 87417380 | 1 | BAR, Hose Stand |
| 18 | 87404421 | 1 | HARNESS, Light, Rear Hitch |
| 19 | 413-416 | 2 | BOLT, Hex, 1/4″-20 x 1″, G5 |
| 20 | 86992211 | 2 | NUT, LOCK, 1/4, NC |
| 21 | 25705012 | 1 | COUPLING, Breakaway |
| 22 | 413-620 | 1 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 23 | 495-21044 | 1 | WASHER, 3/8″ |
| 24 | 86992213 | 1 | NUT, LOCK, 3/8, NC |
| 25 | 413-1220 | 1 | BOLT, Hex, 3/4″-10 x 1 1/4″, G5 |
| 26 | 492-11075 | 1 | WASHER, LOCK, 3/4″, 3/4″ |
| 27 | 87381 | 2 | WASHER, 3/4″, SAE |
| 28 | 87418305 | 2 | PLATE, Bolt, Rear Hitch |
| 29 | 413-10136 | 8 | BOLT, Hex, 5/8″-11 x 8 1/2″, G5 |
| 30 | 86992216 | 8 | NUT, LOCK, 5/8, NC |
| 34 | 425-106 | 2 | NUT, 3/8″-16, G5 |
| 35 | 1284291C1 | 2 | HOSE, 1/4 x 95 |
| 36 | 189348A1 | 2 | HOSE, 1/4 x 280 |
| 37 | 218-5058 | 4 | CONNECTOR, HYD., 9/16″-18, 37є x 3/4″-18, O-Ring |
| 38 | 218-734 | 2 | UNION, 9/16″-18, 37є x 9/16″-18, 37є |
| 39 | 25705041 | 2 | COUPLING, Male ISO – 3/4 SAEF |
| 40 | 25705021 | 2 | COUPLING, Female |
| 41 | 06200125 | 6 | CLAMP, HOSE |
| 42 | 413-656 | 2 | BOLT, Hex, 3/8″-16 x 3 1/2″, G5, (3 Hose Clamps) |
| 42 | 413-672 | 2 | BOLT, Hex, 3/8″-16 x 4 1/2″, G5, (4 Hose Clamps) |
| 43 | 86992213 | 2 | NUT, LOCK, 3/8 |
09-32 REAR HITCH 2006 PRODUCTION 19 – 25 UNITS FOR SERIAL NUMBER JFH0031778 AND AFTER
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87458264 | 1 | HITCH, Rear, A-Frame, 19 – 25 Units |
| 2 | 87459718 | 1 | EXTENSION, Extension |
| 3 | 06405130 | 2 | CLAMP, 2 Bolt |
| 4 | 86988845 | 1 | TUBE, Main, Harrow Mount, 19 – 22 Units |
| 4 | 86988846 | 1 | TUBE, Main, Harrow Mount, 25 Units |
| 5 | 86989133 | 2 | PLATE, Bolt Harrow Mount |
| 6 | 413-1296 | 8 | BOLT, Hex, 3/4″-10 x 6″, G5, 19 – 22 Units |
| 6 | 413-1288 | 8 | BOLT, Hex, 3/4″-10 x 5 1/2″, G5, 25 Unit |
| 7 | 86992217 | 10 | NUT, LOCK, 3/4 |
| 8 | 413-10160 | 4 | BOLT, Hex, 5/8″-11 x 10″, G5 |
| 9 | 413-1080 | 2 | BOLT, Hex, 5/8″-11 x 5″, G5 |
| 10 | 86992216 | 10 | NUT, LOCK, 5/8 |
| 11 | 87629102 | 2 | U-BOLT |
| 12 | 495-81028 | 4 | WASHER, 21/32″ x 1 1/2″ x .240″ |
| 13 | 413-12112 | 2 | BOLT, Hex, 3/4″-10 x 7″, G5 |
| 14 | 17413011 | 2 | WASHER, SPECIAL, 1-3/4 OD x 13/16 ID |
| 15 | 87458925 | 2 | SPACER, Hitch Extension |
09-33 REAR HITCH 2006 PRODUCTION 28 – 34 UNITS FOR SERIAL NUMBER JFH0031778 AND AFTER
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87458263 | 1 | HITCH, Rear, A-Frame, 28 – 34 Units |
| 2 | 87459719 | 1 | EXTENSION, Wide Hitch |
| 3 | 06405130 | 2 | CLAMP, 2 Bolt |
| 4 | 86988846 | 1 | TUBE, Main Harrow Mount |
| 5 | 86989133 | 2 | PLATE, Bolt Harrow Mount |
| 6 | 413-1288 | 8 | BOLT, Hex, 3/4″-10 x 5 1/2″, G5 |
| 7 | 86992217 | 10 | NUT, LOCK, 3/4 |
| 8 | 413-10160 | 4 | BOLT, Hex, 5/8″-11 x 10″, G5 |
| 9 | 413-1080 | 2 | BOLT, Hex, 5/8″-11 x 5″, G5 |
| 10 | 86992216 | 10 | NUT, LOCK, 5/8 |
| 11 | 87629102 | 2 | U-BOLT |
| 12 | 495-81028 | 4 | WASHER, 21/32″ x 1 1/2″ x .240″ |
| 13 | 413-12112 | 2 | BOLT, Hex, 3/4″-10 x 7″, G5 |
| 14 | 17413011 | 2 | WASHER, SPECIAL, 1-3/4 OD x 13/16 ID |
| 15 | 87458925 | 2 | SPACER, Hitch Extension |
09-34 REAR JACK PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86991544 | 1 | MOUNTING PARTS, Jack |
| 2 | 32230000 | 1 | JACK, 3000 lb |
| 3 | 413-1240 | 4 | BOLT, Hex, 3/4″-10 x 2 1/2″, G5 |
| 4 | 86992217 | 4 | NUT, LOCK, 3/4, NC |
| 5 | 87425680 | 1 | DECAL, Important, Rear Jack |
09-35 COIL TINE HARROW MOUNTING PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86988845 | 1 | TUBE, Main Harrow Mount, 87 in, 19 – 22 ft |
| 1 | 86988846 | 1 | TUBE, Main Harrow Mount, 104 in, 25 – 34 ft |
| 2 | 86991047 | 2 | TUBE, Wing Harrow Mount, 51 in, 19 ft |
| 2 | 86988424 | 2 | TUBE, Wing Harrow Mount, 59 in, 22 ft |
| 2 | 86988419 | 2 | TUBE ASSY., Wing Harrow Mount, 71 in, 25 ft |
| 2 | 86988845 | 2 | TUBE, Wing Harrow Mount, 87 in, 28 ft |
| 2 | 86988846 | 2 | TUBE, Wing Harrow Mount, 104 in, 31 – 34 ft |
| 3 | 86989133 | 3 | PLATE, Bolt, Harrow Mount |
| 4 | 86991349 | 2 | PLATE, Bolt, Harrow Mount, 19 ft |
| 4 | 86989133 | 2 | PLATE, Bolt, Harrow Mount, 22- 34 ft |
| 5 | 86991544 | 1 | MOUNTING PARTS, Jack |
| 6 | 32230000 | 1 | JACK, 3000 lb |
| 7 | 86988422 | 2 | MOUNTING PARTS, Extension, 22 – 25 ft, N/A For 19 ft |
| 7 | 451195A1 | 2 | MOUNTING PARTS, Extension, 28 – 34 ft, N/A For 19 ft |
| 8 | 413-1296 | 24 | BOLT, Hex, 3/4″-10 x 6″, G5 |
| 8 | 413-1296 | 32 | BOLT, Hex, 3/4″-10 x 6″, G5 |
| 8 | 413-1288 | 32 | BOLT, Hex, 3/4″-10 x 5 1/2″, G5 |
| 9 | 86992217 | 24 | NUT, LOCK, 3/4, NC, 19 ft |
| 9 | 86992217 | 32 | NUT, LOCK, 3/4, NC, 22 – 34 ft |
| 10 | 413-1240 | 8 | BOLT, Hex, 3/4″-10 x 2 1/2″, G5, 22 – 34 ft |
| 11 | 86984844 | 2 | BRACKET, Harrow Mount Support, 31 – 34 ft |
| 12 | 445844A1 | 4 | U-BOLT, 5/8 x 5-1/4 x 4-1/2, 31 – 34 ft |
| 13 | 87629089 | 4 | U-BOLT, 31 – 34 ft |
| 14 | 86992216 | 16 | NUT, LOCK, 5/8, NC |
| 15 | 87404819 | 1 | BRACKET, Crank Handle Storage |
| 16 | 433-616 | 1 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5 |
| 17 | 495-21044 | 1 | WASHER, 3/8″ |
| 18 | 86992213 | 1 | NUT, LOCK, 3/8, NC |
| 19 | D33805 | 1 | PIN, Klik, 7/16 x 2 |
09-36 SPIKE HARROW MOUNTING PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 86988845 | 1 | TUBE, Main Harrow Mount, 87 in, 19 – 22 ft |
| 1 | 86988847 | 1 | TUBE, Main Harrow Mount, 117 in, 25 – 34 ft |
| 2 | 86988424 | 2 | TUBE, Wing Harrow Mount, 59 in, 19 ft |
| 2 | 86988419 | 2 | TUBE ASSY., Wing Harrow Mount, 71 in, 22 – 25 ft |
| 2 | 86988845 | 2 | TUBE, Wing Harrow Mount, 87 in, 28 ft |
| 2 | 86988846 | 2 | TUBE, Wing Harrow Mount, 104 in, 31 ft |
| 2 | 86988847 | 2 | TUBE, Wing Harrow Mount, 117 in, 34 ft |
| 3 | 86989133 | 3 | PLATE, Bolt, Harrow Mount |
| 4 | 86991349 | 2 | PLATE, Bolt, Harrow Mount, 19 ft |
| 4 | 86989133 | 2 | PLATE, Bolt, Harrow Mount, 22 – 34 ft |
| 5 | 86991544 | 1 | MOUNTING PARTS, Jack |
| 6 | 32230000 | 1 | JACK, 3000 lb |
| 7 | 86988422 | 2 | MOUNTING PARTS, Extension, 22 – 25 ft, N/A For 19 ft |
| 7 | 451195A1 | 2 | MOUNTING PARTS, Extension, 28 – 34 ft, N/A For 19 ft |
| 8 | 413-1296 | 24 | BOLT, Hex, 3/4″-10 x 6″, G5, 19 ft |
| 8 | 413-1296 | 32 | BOLT, Hex, 3/4″-10 x 6″, G5, 22 ft |
| 8 | 413-1288 | 32 | BOLT, Hex, 3/4″-10 x 5 1/2″, G5, 25 – 34 ft |
| 9 | 86992217 | 24 | NUT, LOCK, 3/4, NC, 19 ft |
| 9 | 86992217 | 32 | NUT, LOCK, 3/4, NC, 22 – 34 ft |
| 10 | 413-1240 | 8 | BOLT, Hex, 3/4″-10 x 2 1/2″, G5, 22 – 34 ft |
| 11 | 86984844 | 2 | BRACKET, Harrow Mount Support, 31 – 34 ft |
| 12 | 445844A1 | 4 | U-BOLT, 5/8 x 5-1/4 x 4-1/2, 31 – 34 ft |
| 13 | 87629089 | 4 | U-BOLT, 31 – 34 ft |
| 14 | 86992216 | 16 | NUT, LOCK, 5/8, NC |
09-37 COIL TINE HARROW PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 06251376 | 2 | BRACKET, Mounting |
| 2 | 06251351 | 2 | ROD, THREADED |
| 3 | 06251316 | 2 | LOCKING DEVICE, Harrow |
| 4 | 24143902 | 2 | SPRING, COMPRESSION |
| 5 | 20090105 | 2 | SEAT, SPRING, Spring Holder |
| 6 | 38-1816 | 2 | PIN, LOCK, 1/8″ x 1″, Slotted, 1/8 x 1, Spring |
| 7 | 06251341 | 2 | TUBE ASSY. |
| 8 | 06250358 | 4 | LINK, Tine |
| 9 | 06250150 | 4 | CHANNEL, Channel |
| 10 | 06251331 | 2 | LINKAGE, Linkage |
| 11 | 06250041 | 3 | CHANNEL, 4-Tine, 53 Inch |
| 11 | 06250051 | 3 | CHANNEL, 5-Tine, 68 Inch |
| 11 | 06250061 | 3 | CHANNEL, 6-Tine, 83 Inch |
| 11 | 06250071 | 3 | CHANNEL, 7-Tine, 98 Inch |
| 11 | 06250081 | 3 | CHANNEL, 8-Tine, 113 Inch |
| 11 | 06250091 | 3 | CHANNEL, 9-Tine, 128 Inch |
| 11 | 06250104 | 3 | CHANNEL, 10-Tine, 143 Inch |
| 15 | 06250155 | 2 | CHANNEL, Rear Channel |
| 20 | 413-1288 | 4 | BOLT, Hex, 3/4″-10 x 5 1/2″, G5, 3/4 x 5-1/2, NC, gr 5 |
| 21 | 86992217 | 4 | NUT, LOCK, 3/4, NC |
| 22 | 492-11031 | 2 | WASHER, LOCK, 5/16″ |
| 23 | 86992212 | 2 | NUT, LOCK, 5/16, NC |
| 24 | 14816331 | 2 | PIN, CLEVIS, 1 x 4-1/8 |
| 25 | 432-2032 | 2 | PIN, SPLIT (COTTER), 5/16″ x 2″, 5/16″ x 2″ |
| 26 | 17614030 | 2 | BUSHING, 7/8, Machinery |
| 27 | 219-87 | 2 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 28 | 87339 | 4 | BOLT, Hex, 1/2″-13 x 3″, G5 |
| 29 | 425-108 | 4 | NUT, 1/2″-13, G5 |
| 30 | 495-21056 | 4 | WASHER, 1/2″, Flat |
| 31 | 413-628 | 6 | BOLT, Hex, 3/8″-16 x 1 3/4″, G5 |
| 32 | 231-4246 | 6 | NUT, LOCK, 3/8″-16, GB |
| 33 | 413-664 | 6 | BOLT, Hex, 3/8″-16 x 4″, G5 |
| 34 | 495-21044 | 12 | WASHER, 3/8″ |
| 35 | 80680 | 6 | WASHER, LOCK, 3/8″ |
| 36 | 425-106 | 6 | NUT, 3/8″-16, G5 |
| 37 | 14810290 | 2 | PIN, HEADED, 5/8 x 4.4, Clevis |
| 38 | 06250210 | 4 | BUSHING, Stop |
| 39 | 14720411 | 2 | PIN, SPLIT (COTTER), 1/8 x 2, Hair |
| 40 | 80299 | 6 | WASHER, 5/8″, Flat |
| 41 | 06250170 | 4 | SPACER, Pivot |
| 45 | 06250190 | 2 | BUSHING, Pivot |
| 46 | 425-1014 | 4 | NUT, 7/8″-9, G5 |
| 47 | 434-516 | 2 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 1″, G5, Full Thd |
| 48 | 06250334 | 2 | SPACER, Flat |
| 49 | 06251395 | 1 | CRANK, Adjustment |
| 50 | 18534332 | 2 | DECAL, Raise |
| 51 | 311864A1 | 1 | REFLECTOR, Amber, NOTE: Mount On Outside Main Frame Mounting Tubes Only |
09-38 SPIKE HARROW PARTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87417723 | 2 | ARM, Mounting, 3-Bar Spike |
| 2 | 87417725 | 2 | PLATE, MOUNTING |
| 3 | 87417726 | 2 | CHAIN, Pull, 23 Links |
| 4 | 87417727 | 6 | CHAIN, Lift, 23 Links |
| 5 | 87417728 | 3 | BAR, 9 Tooth, 6 ft 6 in (Less Teeth) |
| 5 | 87417729 | 3 | BAR, 11 Tooth, 8 ft (Less Teeth) |
| 5 | 87417730 | 3 | BAR, 12 Tooth ,8 ft 9 in (Less Teeth) |
| 5 | 87417731 | 3 | BAR, 13 Tooth, 9 ft 6 in (Less Teeth) |
| 5 | 87417732 | 3 | BAR, 14 Tooth, 10 ft 3 in (Less Teeth) |
| 5 | 87417733 | 3 | BAR, 15 Tooth, 11 ft (Less Teeth) |
| 5 | 87417734 | 3 | BAR, 16 Tooth, 11 ft 9 in (Less Teeth) |
| 5 | 87417735 | 3 | BAR, 17 Tooth, 12 ft 6 in (Less Teeth) |
| 9 | 87417738 | 4 | BRACKET, Channel |
| 10 | 87417739 | 4 | LINK, Assembly Pull |
| 11 | 433-1048 | 8 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 3″, G5 |
| 12 | 86992216 | 8 | NUT, LOCK, 5/8, NC |
| 13 | 413-644 | 4 | BOLT, Hex, 3/8″-16 x 2 3/4″, G5 |
| 14 | 86992213 | 4 | NUT, LOCK, 3/8, NC |
| 15 | 413-840 | 6 | BOLT, Hex, 1/2″-13 x 2 1/2″, G5 |
| 16 | 86992215 | 6 | NUT, LOCK, 1/2, NC |
| 17 | 87417740 | 2 | BRACKET, Channel Assembly |
| 18 | 413-820 | 2 | BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd |
| 19 | 86992215 | 2 | NUT, LOCK, 1/2, NC |
| 20 | 87417741 | 2 | CHAIN, Pull Assembly |
| 21 | 413-620 | 2 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 22 | 495-21044 | 2 | WASHER, 3/8″ |
| 23 | 86992213 | 2 | NUT, LOCK, 3/8, NC |
| 24 | 413-648 | 6 | BOLT, Hex, 3/8″-16 x 3″, G5 |
| 25 | 495-21044 | 6 | WASHER, 3/8″ |
| 26 | 86992213 | 3 | NUT, LOCK, 3/8, NC |
| 27 | 87417742 | 6 | PIN, LINCH, 7/16 |
| 28 | 413-1088 | 8 | BOLT, Hex, 5/8″-11 x 5 1/2″, G5 |
| 29 | 492-11062 | 8 | WASHER, LOCK, 5/8″ |
| 30 | 425-1010 | 8 | NUT, 5/8″-11, G5 |
| 31 | 311864A1 | 1 | REFLECTOR, Amber, NOTE: Mount On Outside Main Frame Mounting Tubes Only |
09-39 DECALS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 311864A1 | 8 | REFLECTOR, Yellow |
| 2 | 311865A1 | 4 | REFLECTOR, Flourescent |
| 3 | 311863A1 | 4 | REFLECTOR, Red |
| 4 | 311860A1 | 1 | EMBLEM, SMV |
| 5 | 192849A2 | 3 | DECAL, Case IH Logo, Used On 2007 And Prior Models |
| 5 | 87595770 | 3 | DECAL, Case IH, Used On 2008 And After Models |
| 6 | 147782C1 | 1 | DECAL, Earth Metal |
| 7 | 18534227 | 1 | DECAL, DANGER, Crushing Hazard |
| 7 | 87413533 | 1 | DECAL, Crushing Hazard, French |
| 8 | 18534228 | 1 | DECAL, Pull Type |
| 8 | 87413532 | 1 | DECAL, Pull Type, French |
| 9 | 18534277 | 4 | DECAL, Spring Compression |
| 9 | 87413530 | 4 | DECAL, Spring Compression, French |
| 10 | 18534282 | 1 | DECAL, WARNING, Hydraulic |
| 10 | 87421390 | 1 | DECAL, Hydraulic, French |
| 11 | 87425680 | 1 | DECAL, Important Jack |
| 12 | 86992769 | 1 | DECAL, 340, Rh |
| 13 | 86992768 | 1 | DECAL, 340, Lh |
09-40 DECALS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87735841 | 1 | DECAL, 340 True-Tandem, Lh, Used On 2007 And After Models |
| 2 | 87735842 | 1 | DECAL, 340 True-Tandem, Rh, Used On 2007 And After Models |
09-41 DECALS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87673549 | 1 | DECAL, Tipping Hazard |
| 1 | 87673653 | 1 | DECAL, Tipping Hazard (French Version) |
| 2 | 87672316 | 1 | DECAL, Towing Hazard |
| 2 | 87673650 | 1 | DECAL, Towing Hazard (French Version) |
| 3 | 87673548 | 1 | DECAL, Overhead Power Lines |
| 3 | 87673656 | 1 | DECAL, Overhead Power Lines (French Version) |
| 4 | 87668160 | 1 | DECAL, Transport Turning Hazard |
| 4 | 87673649 | 1 | DECAL, Transport Turning Hazard (French Version) |