Amity Air Till Drill 5010/6010 Unit
Amity Air Till Drill 5010/6010 Unit — parts list
331 part numbers across 31 assemblies, transcribed from the catalogue above. Search this page for a part number to find the assembly it belongs to.
This catalogue is a scan without a text layer: the part numbers below were read from the page images by OCR, and only readings the OCR was confident about are listed. Check a number against the viewer above before ordering.
MAIN FRAME ASSEMBLY – 15.2M (50FT) & 18.3M (60FT)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 20966F | 2 | HYD CYL 5X30 ILP FGS #A519CY07 |
| 2 | 22290 | 2 | L-BOLT 5/8 IN FOR 4 SQ TUBE |
| 3 | 233552 | 2 | WING REST SLIDE TUBE (SEE NOTE BELOW) |
| 4 | 234764 | 2 | HYD CYL 4″ X 12″ (BLACK) |
| 5 | 234811 | 2 | 1/2 X 4 BENT PIN W/HAIRPIN |
| 6 | 241538 | 1 | TRUSS STRAP MOUNT |
| 7 | 241634 | 2 | INNER WING REST – ATD (SEE NOTE BELOW) |
| 8 | 241640 | 2 | 12 INCH CHANNEL LOCK |
| 11 | 243957 | 1 | SHANK HOLDER – REFERENCE |
| 21 | 88277 | 2 | WSHR FLAT 5/8(11/16 X 1-3/4ACT) Z |
FRONT HITCH ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 12103 | 4 | BEARING CONE 1-3/4ID (25580) |
| 2 | 16154 | 4 | 2-1/2IN HUB&SPINDLE ASSY |
| 3 | 16278 | 2 | BEARING BUSHING |
| 4 | 18236 | 1 | CAST DUAL HITCH |
| 5 | 24415 | 1 | JACK |
| 6 | 26120 | 4 | SEAL |
| 7 | 42082 | 2 | 1-1/2NF HYDRA JAM LOCK NUT |
| 8 | 51468 | 2 | BUSHING |
| 9 | 54599 | 2 | WALKER BEARING BUSHING |
| 11 | 88103 | 2 | NUT HEX 3/8-16NC 5Z |
| 17 | 88305 | 4 | BLT HEX 3/4-10NCX5 5Z |
| 21 | 88408 | 4 | BLT HEX 5/8-11NCX3 52 |
| 31 | 240498 | 2 | TRANSPORT ANCHOR |
FRONT HITCH ASSEMBLY ADJUSTMENTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 88303 | 1 | BLT HEX 1/2-13NC X 1 5Z |
| 2 | 89015 | 1 | WSHR HLK 1/2ID(9/16ACT) Z |
| 3 | 351666 | 4 | HITCH LEVEL SHIM |
| 351665 | 1 | HITCH LEVEL SHIM KIT |
LEFT INNER WING ASSEMBLY – 15.2M (50FT)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 34132 | 4 | AXLE CLAMP ASSEMBLY (RED) |
| 2 | 62271 | 1 | FRAME PLATE (RED) |
| 3 | 67854 | 2 | HEADLESS PIN(2) 1-1/4X4-1/2 |
| 4 | 88125 | 1 | NUT HEX 1-8NC 5Z |
| 5 | 88131 | 4 | WSHR FLAT 3/4(13/16 X 2ACT) Z |
| 6 | 88145 | 2 | BLT-U 5/8-11NC X 4X 5-1/4Z |
| 7 | 88196 | 4 | WSHR FLAT 1(1-1/16 X 2-1/2ACT) Z |
| 8 | 88272 | 4 | BLT HEX 3/4-10NC X 4 5Z |
| 9 | 88290 | 2 | BLT HEX 3/4-10NC X 2 8YZ |
| 10 | 88291 | 2 | BLT HEX 3/4-10NC X 3 5Z |
| 11 | 88295 | 4 | BLT HEX 5/8-11NC X 6 5Z |
| 12 | 88305 | 2 | BLT HEX 3/4-10NC X 5 5Z |
| 13 | 88356 | 17 | NUT 2POSLK 3/4-10NC 52 |
| 14 | 88404 | 1 | BLT HEX 3/4-10NC X 2-1/2 5Z |
| 15 | 88427 | 1 | BLT HEX 1-1/4-7NC X 8 5Z |
| 16 | 88428 | 2 | BLT HEX 1-1/4-7NC X 9 5Z |
| 17 | 88430 | 5 | NUT 2POSLK 1-1/4-7NC 5Z |
| 18 | 88487 | 4 | BLT HEX 3/4-10NC X 8-1/2 5Z |
| 19 | 88602 | 4 | WSHR FLAT 1-1/4(1-3/8 X 3ACT) Z |
| 20 | 88658 | 6 | NUT TOP LK 1-8NC 5Z |
| 21 | 88666 | 2 | BLT HEX 1-8NC X 6-1/2 5Z |
| 22 | 88767 | 4 | PIN ROLL 1/4DIA X 2-1/2 Z |
| 23 | 89029 | 1 | BLT HEX 1-1/4-7NC X 4 5Z |
| 24 | 89130 | 2 | BLT HEX 3/4-10NC X 6-1/2 5Z |
| 25 | 89134 | 1 | BLT HEX 1-1/4-7NC X 7 5Z |
| 26 | 89371 | 4 | BLT HEX 1-8NC X 3-1/2 8YZ |
| 27 | 233181 | 2 | LINK DONUT (ZINC) |
| 28 | 241697 | 1 | LEFT INNER ATD WING – SHORT |
| 29 | 241726 | 1 | LEFT INNER WING PACKER MOUNT 5010 ATD |
| 30 | 241737 | 1 | FRONT WING ANCHOR |
| 31 | 241733 | 1 | REAR LIFT ASSEMBLY – SHORT |
| 32 | 241731 | 1 | SHORT INNER WING PACKER TOWER |
| 33 | 240572 | 1 | LIFT MAST TUBE |
| 34 | 241513 | 2 | CENTER PACKER HANGER |
| 35 | 241572 | 1 | ADJUSTMENT SCREW |
| 36 | 241622 | 1 | HYD CYL 4-1/2X8 SEQ |
| 37 | 238654 | 1 | OUTER SHORT WING REST – ATD |
| 38 | 247801 | 1 | MAIN FRAME – ATD – 10 INCH – 2010 |
| 39 | 350919 | 1 | PACKER LIFT ANCHOR |
HDW KIT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 20966F | 2 | HYD CYL 5X30 FGS #A519CY07 |
| 2 | 233589 | 4 | PIN BUSHING (ZINC) |
| 3 | 233900 | 2 | LOCK PIN |
| 4 | 236349 | 6 | HINGE PIN (ZINC) |
| 5 | 236391 | 4 | PIVOT TUBE (ZINC) |
| 6 | 236394 | 2 | OUTER WING LATCH BRACKET |
| 7 | 238653 | 2 | OUTER FOLD LINK – LONG |
| 8 | 239045 | 8 | HINGE TIE PLATE – PAINTED |
| 9 | 241697 | 1 | LEFT INNER ATD WING SHORT – REF |
| 10 | 241705 | 2 | INNER WING HINGE |
| 11 | 241707 | 2 | OUTER HINGE PIVOT |
| 12 | 241708 | 1 | LEFT OUTER WING ATD SHORT – REF |
| 13 | 243017 | 2 | OUTER FOLD LINK – FRONT |
| 14 | 243018 | 2 | OUTER FOLD LINK – REAR |
| 16 | 42473 | 2 | HEADLESS PIN (H) (2) 1X2-3/8 |
| 17 | 88131 | 2 | WSHR FLAT 3/4(13/16X2ACT) Z |
| 18 | 88196 | 4 | WSHR FLAT 1(1-1/16X2-1/2ACT) Z |
| 20 | 88421 | 2 | BLT HEX 3/4-10NCX4-1/2 5Z |
| 21 | 88767 | 2 | PIN ROLL 1/4DIAX2-1/2 Z |
| 22 | 89004 | 4 | BLT HEX 5/16-18NCX2-1/2 5Z |
| 23 | 89011 | 12 | BLT HEX 3/8-16NC X 2 5Z |
| 24 | 88196 | 8 | WSHR FLAT 1(1-1/16 X 2-1/2ACT) Z |
| 2 | 350919 | 1 | PACKER LIFT ANCHOR |
| 3 | 241665 | 1 | HYD CYL 3-1/2X8 WITH SPACER |
| 4 | 241572 | 1 | ADJUSTMENT SCREW |
| 5 | 241549 | 1 | LEFT OUTER ATD WING – 6010 |
| 6 | 241513 | 2 | CENTER PACKER HANGER |
| 7 | 240577 | 1 | WING MAST TUBE |
| 8 | 240501 | 1 | LEFT INNER ATD WING – 6010 |
| 9 | 240488 | 1 | PACKER LIFT BRACKET |
| 10 | 237941 | 2 | OUTER WING HINGE – REFERENCE |
| 11 | 235297 | 1 | OUTER PACKER GANG – 6010 |
| 12 | 233232 | 1 | STUB PLATE PAINTED |
| 13 | 222193 | 1 | CP SHANK STUB |
| 14 | 89371 | 4 | BLT HEX 1-8NC X 3-1/2 8YZ |
| 15 | 88767 | 4 | PIN ROLL 1/4DIA X 2-1/2 Z |
| 16 | 88602 | 4 | WSHR FLAT 1-1/4(1-3/8 X 3ACT)Z |
| 17 | 88487 | 4 | BLT HEX 3/4-10NC X 8-1/2 5Z |
| 18 | 88356 | 2 | NUT 2POSLK 3/4-10NC 5Z |
| 19 | 88291 | 2 | BLT HEX 3/4-10NC X 3 5Z |
| 20 | 88290 | 2 | BLT HEX 3/4-10NC X 2 8YZ |
| 21 | 88272 | 8 | BLT HEX 3/4-10NC X 4 5Z |
| 22 | 88131 | 4 | WSHR FLAT 3/4(13/16 X 2ACT) Z |
| 23 | 88125 | 1 | NUT HEX 1-8NC 52 |
| 24 | 67854 | 2 | HEADLESS PIN(2) 1-1/4X4-1/2 |
| 25 | 34132 | 4 | AXLE CLAMP ASSEMBLY (RED) |
LEFT OUTER WING ASSEMBLY – 15.2M (SOFT)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 350919 | 1 | PACKER LIFT ANCHOR |
| 2 | 241724 | 1 | OUTER PACKER MOUNT-SHORT |
| 3 | 241708 | 1 | LEFT OUTER WING ATD SHORT |
| 4 | 241665 | 1 | HYD CYL 3-1/2X8 WITH SPACER |
| 5 | 241572 | 1 | ADJUSTMENT SCREW |
| 6 | 241513 | 2 | CENTER PACKER HANGER |
| 7 | 240572 | 1 | LIFT MAST TUBE |
| 8 | 235761 | 1 | PACKER LIFT BRACKET |
| 9 | 89371 | 4 | BLT HEX 1-8NCX3-1/2 8YZ |
| 10 | 88767 | 4 | PIN ROLL 1/4DIAX2-1/2 Z |
| 11 | 88602 | 4 | WSHR FLAT 1-1/4(1-3/8 X 3ACT) Z |
| 12 | 88487 | 4 | BLT HEX 3/4-10NCX8-1/2 5Z |
| 13 | 88356 | 8 | NUT 2POSLK 3/4-10NC 5Z |
| 14 | 88291 | 2 | BLT HEX 3/4-10NC X 3 5Z |
| 15 | 88272 | 4 | BLT HEX 3/4-10NCX4 5Z |
| 16 | 88131 | 4 | WSHR FLAT 3/4(13/16 X 2ACT) Z |
| 17 | 88125 | 1 | NUT HEX 1-8NC 5Z |
| 18 | 67854 | 3 | HEADLESS PIN(2) 1-1/4X3-23/32 |
| 19 | 34132 | 4 | AXLE CLAMP ASSEMBLY (RED) |
| 20 | 88290 | 2 | BLT HEX 3/4-10NC X 2 8YZ |
RIGHT INNER WING ASSEMBLY 15.2M (50FT)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 233181 | 2 | LINK DONUT (ZINC) |
| 2 | 238654 | 1 | OUTER SHORT WING REST -ATD |
| 3 | 240572 | 1 | LIFT MAST TUBE |
| 4 | 241513 | 2 | CENTER PACKER HANGER |
| 5 | 241572 | 1 | ADJUSTMENT SCREW |
| 6 | 241622 | 1 | HYD CYL 4-1/2X8 SEQ |
| 7 | 241716 | 1 | RIGHT INNER WING 5010 ATD |
| 8 | 241730 | 1 | RIGHT INNER WING PACKER MOUNT 5010 ATD |
| 9 | 241731 | 1 | SHORT INNER WING PACKER TOWER |
| 11 | 241737 | 1 | FRONT WING ANCHOR |
| 12 | 34132 | 4 | AXLE CLAMP ASSEMBLY (RED) |
| 13 | 350919 | 1 | PACKER LIFT ANCHOR |
| 21 | 88290 | 2 | BLT HEX 3/4-10NC X 2 8YZ |
| 31 | 88602 | 4 | WSHR FLAT 1-1/4(1-3/8 X 3ACT) Z |
RIGHT OUTER WING ASSEMBLY 12.5M (50FT)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 350919 | 1 | PACKER LIFT ANCHOR |
| 2 | 241724 | 1 | OUTER PACKER MOUNT 5010 ATD |
| 3 | 241719 | 1 | RIGHT OUTER WING 5010 ATD |
| 4 | 241665 | 1 | HYD CYL 3-1/2X8 WITH SPACER |
| 5 | 241572 | 1 | ADJUSTMENT SCREW |
| 6 | 241513 | 2 | CENTER PACKER HANGER |
| 7 | 240572 | 1 | LIFT MAST TUBE |
| 8 | 235761 | 1 | PACKER LIFT BRACKET |
| 9 | 89371 | 4 | BLT HEX 1-8NC X 3-1/2 8YZ |
| 10 | 88767 | 5 | PIN ROLL 1/4DIA X 2-1/2 Z |
| 1 | 88602 | 4 | WSHR FLAT 1-1/4(1-3/8 X 3ACT) Z |
| 12 | 88487 | 4 | BLT HEX 3/4-10NC X 8-1/2 5Z |
| 13 | 88356 | 8 | NUT 2POSLK 3/4-10NC 5Z |
| 14 | 88291 | 2 | BLT HEX 3/4-10NC X 3 5Z |
| 15 | 88290 | 2 | BLT HEX 3/4-10NC X 2 8YZ |
| 16 | 88272 | 4 | BLT HEX 3/4-10NC X 4 5Z |
| 17 | 88131 | 4 | WSHR FLAT 3/4(13/16 X 2ACT) Z |
| 18 | 88125 | 1 | NUT HEX 1-8NC 5Z |
| 19 | 67854 | 2 | HEADLESS PIN(2) 1-1/4X4-1/2 |
| 20 | 34132 | 4 | AXLE CLAMP ASSEMBLY (RED) |
LEFT INNER WING ASSEMBLY – 18.3M (60FT)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 34132 | 4 | AXLE CLAMP ASSEMBLY (RED) |
| 2 | 62271 | 1 | FRAME PLATE (RED) |
| 3 | 67854 | 2 | HEADLESS PIN(2) 1-1/4X4-1/2 |
| 4 | 88125 | 1 | NUT HEX 1-8NC 5Z |
| 5 | 88131 | 4 | WSHR FLAT 3/4(13/16 X 2ACT) Z |
| 6 | 88145 | 2 | BLT-U 5/8-11NC X 4X 5-1/4Z |
| 7 | 88196 | 4 | WSHR FLAT 1(1-1/16 X 2-1/2ACT) Z |
| 8 | 88272 | 4 | BLT HEX 3/4-10NC X 4 5Z |
| 9 | 88290 | 2 | BLT HEX 3/4-10NC X 2 8YZ |
| 10 | 88291 | 2 | BLT HEX 3/4-10NC X 3 5Z |
| 1 | 88295 | 4 | BLT HEX 5/8-11NC X 6 52 |
| 12 | 88305 | 2 | BLT HEX 3/4-10NC X 5 5Z |
| 13 | 88356 | 17 | NUT 2POSLK 3/4-10NC 52 |
| 14 | 88404 | 1 | BLT HEX 3/4-10NC X 2-1/2 5Z |
| 15 | 88427 | 1 | BLT HEX 1-1/4-7NC X 8 5Z |
| 16 | 88428 | 2 | BLT HEX 1-1/4-7NC X 9 5Z |
| 17 | 88430 | 5 | NUT 2POSLK 1-1/4-7NC 5Z |
| 18 | 88487 | 4 | BLT HEX 3/4-10NC X 8-1/2 5Z |
| 19 | 88602 | 4 | WSHR FLAT 1-1/4(1-3/8 X 3ACT) Z |
| 20 | 88658 | 6 | NUT TOP LK 1-8NC 5Z |
| 21 | 88666 | 2 | BLT HEX 1-8NC X 6-1/2 5Z |
| 22 | 88767 | 4 | PIN ROLL 1/4DIA X 2-1/2 Z |
| 23 | 89029 | 1 | BLT HEX 1-1/4-7NC X 4 52 |
| 24 | 89130 | 2 | BLT HEX 3/4-10NC X 6-1/2 52 |
| 25 | 89134 | 1 | BLT HEX 1-1/4-7NC X 7 5Z |
| 26 | 89371 | 4 | BLT HEX 1-8NC X 3-1/2 8YZ |
| 27 | 233181 | 2 | LINK DONUT (ZINC) |
| 28 | 240501 | 1 | LEFT INNER ATD WING – 6010 |
| 29 | 240521 | 1 | LEFT INNER WING PACKER GANG – 6010 |
| 30 | 240550 | 1 | FRONT WING ANCHOR |
| 31 | 240551 | 1 | REAR LIFT ASSEMBLY |
| 32 | 240562 | 1 | WING PACKER TOWER |
| 33 | 240577 | 1 | WING MAST TUBE |
| 34 | 241513 | 2 | CENTER PACKER HANGER |
| 35 | 241572 | 1 | ADJUSTMENT SCREW |
| 36 | 241622 | 1 | HYD CYL 4-1/2X8 SEQ |
| 37 | 241633 | 1 | OUTER WING REST -ATD |
| 38 | 247801 | 1 | MAIN FRAME -ATD – 10 INCH – 2010 |
RIGHT INNER WING ASSEMBLY – 18.3M (60FT)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 350919 | 1 | PACKER LIFT ANCHOR |
| 2 | 247801 | 1 | MAIN FRAME – ATD – 10 INCH – 2010 |
| 3 | 241633 | 1 | OUTER WING REST – ATD |
| 4 | 241622 | 1 | HYD CYL 4-1/2X8 SEQ |
| 5 | 241572 | 1 | ADJUSTMENT SCREW |
| 6 | 241513 | 1 | CENTER PACKER HANGER |
| 7 | 240577 | 1 | WING MAST TUBE |
| 8 | 240562 | 1 | WING PACKER TOWER |
| 9 | 240551 | 1 | REAR LIFT ASSEMBLY |
| 10 | 240550 | 1 | FRONT WING ANCHOR |
| 11 | 240523 | 1 | RIGHT INNER WING PACKER GANG – 6010 |
| 12 | 240507 | 1 | RIGHT INNER ATD WING – 6010 |
| 13 | 233181 | 2 | LINK DONUT (ZINC) |
| 14 | 89371 | 4 | BLT HEX 1-8NC X 3-1/2 8YZ |
| 15 | 89134 | 1 | BLT HEX 1-1/4-7NC X 7 5Z |
| 16 | 89029 | 1 | BLT HEX 1-1/4-7NC X 4 52 |
| 17 | 88767 | 4 | PIN ROLL 1/4DIA X 2-1/2 Z |
| 18 | 88666 | 2 | BLT HEX 1-8NC X 6-1/2 5Z |
| 19 | 88658 | 2 | NUT TOP LK 1-8NC 5Z |
| 20 | 88602 | 4 | WSHR FLAT 1-1/4(1-3/8 X 3ACT) Z |
| 21 | 88487 | 4 | BLT HEX 3/4-10NC X 8-1/2 52 |
| 22 | 88430 | 5 | NUT 2POSLK 1-1/4-7NC 5Z |
| 23 | 88428 | 2 | BLT HEX 1-1/4-7NC X 9 5Z |
| 24 | 88427 | 1 | BLT HEX 1-1/4-7NC X 8 5Z |
| 25 | 88404 | 3 | BLT HEX 3/4-10NC X 2-1/2 5Z |
| 26 | 88305 | 2 | BLT HEX 3/4-10NC X 5 52 |
| 27 | 88295 | 4 | BLT HEX 5/8-11NC X 6 5Z |
| 28 | 88291 | 2 | BLT HEX 3/4-10NC X 3 5Z |
| 29 | 88290 | 2 | BLT HEX 3/4-10NC X 2 8YZ |
| 30 | 88272 | 4 | BLT HEX 3/4-10NC X 4 5Z |
| 31 | 88196 | 4 | WSHR FLAT 1(1-1/16 X 2-1/2ACT) Z |
| 32 | 88145 | 2 | BLT-U 5/8-11NC X 4 X §-1/42Z |
| 33 | 88131 | 4 | WSHR FLAT 3/4(13/16 X 2ACT) Z |
| 34 | 88125 | 1 | NUT HEX 1-8NC 5Z |
| 35 | 67854 | 2 | HEADLESS PIN(2) 1-1/4X4-1/2 |
| 36 | 62271 | 1 | FRAME PLATE (RED) |
| 37 | 34132 | 4 | AXLE CLAMP ASSEMBLY (RED) |
| 38 | 88356 | 13 | NUT 2POSLK 3/4-10NC 5Z |
| 39 | 353511 | 1 | WING PACKER HANGER |
RIGHT OUTER WING ASSEMBLY – 18.3M (60FT)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 350919 | 1 | PACKER LIFT ANCHOR |
| 3 | 241665 | 1 | HYD CYL 3-1/2X8 WITH SPACER |
| 4 | 241548 | 1 | RIGHT OUTER ATD WING – 6010 |
| 5 | 241513 | 2 | CENTER PACKER HANGER |
| 6 | 240577 | 1 | WING MAST TUBE |
| 7 | 240507 | 1 | RIGHT INNER ATD WING 6010 – REF |
| 8 | 240488 | 1 | PACKER LIFT BRACKET |
| 9 | 237941 | 2 | OUTER WING HINGE – REFERENCE |
| 10 | 235297 | 1 | OUTER PACKER GANG – 6010 |
| 11 | 233232 | 1 | STUB PLATE PAINTED |
| 12 | 222193 | 1 | CP SHANK STUB |
| 13 | 89371 | 4 | BLT HEX 1-8NC X 3-1/2 8YZ |
| 14 | 88767 | 4 | PIN ROLL 1/4DIA X 2-1/2 Z |
| 15 | 88602 | 4 | WSHR FLAT 1-1/4(1-3/8 X 3ACT) Z |
| 16 | 88487 | 4 | BLT HEX 3/4-10NC X 8-1/2 5Z |
| 17 | 88356 | 16 | NUT 2POSLK 3/4-10NC 5Z |
| 18 | 88291 | 2 | BLT HEX 3/4-10NC X 3 5Z |
| 19 | 88290 | 2 | BLT HEX 3/4-10NC X 2 8YZ |
| 20 | 88272 | 8 | BLT HEX 3/4-10NC X 45Z |
| 21 | 88131 | 4 | WSHR FLAT 3/4(13/16 X 2ACT) Z |
| 22 | 88125 | 1 | NUT HEX 1-8NC 5Z |
| 23 | 67854 | 2 | HEADLESS PIN(2) 1-1/4X4-1/2 |
| 24 | 34132 | 4 | AXLE CLAMP ASSEMBLY (RED) |
| 25 | 241572 | 1 | ADJUSTMENT SCREW |
WING LIFT WHEEL ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 12103 | 2 | BEARING CONE 1-3/4ID (25580) |
| 2 | 14131 | 2 | 2IN HUB & SPINDLE (LG7830026) BLK |
| 3 | 16009 | 1 | COLLAR |
| 4 | 16278 | 1 | BEARING BUSHING |
| 5 | 26120 | 2 | 2.251D X 3.40 OD TRIPLE LIP SEAL |
| 6 | 42082 | 1 | NUT 1-1/2NF HYDRA JAM LOCK |
| 7 | 54571 | 2 | GAUGE WHEEL PIVOT |
| 8 | 54595 | 3 | HEADLESS PIN(2) 1-1/2 X 9-19/32 |
| 9 | 54599 | 1 | WALKER BEARING BUSHING |
| 10 | 88272 | 1 | BLT HEX 3/4-10NC X 4 5Z |
| 1 | 88293 | 9 | BLT HEX 3/4-10NC X 6 5Z |
| 12 | 88295 | 2 | BLT HEX 5/8-11NC X 6 5Z |
| 13 | 88348 | 3 | NUT 2POSLK 1-8NC 5Z |
| 14 | 88412 | 4 | BLT HEX 3/8-16NC X 3-1/2 5Z |
| 15 | 88507 | 2 | BLT HEX 1/2-13NC X 3-1/2 5Z |
| 16 | 88582 | 4 | BLT HEX 3/8-16NC X 2-3/4 5Z |
| 17 | 88623 | 2 | NUT JAM 1-1/2-6NC 5Z |
| 18 | 88659 | 8 | NUT TOP LK 3/8-16NC 5Z |
| 19 | 88661 | 2 | NUT TOP LK 1/2-13NC 5Z |
| 20 | 88665 | 10 | NUT TOP LK 3/4-10NC 52 |
| 21 | 88738 | 4 | WSHR FLAT 1SAE(1-1/16 X 2ACT) Z |
| 22 | 88767 | 2 | PIN ROLL 1/4DIA X 2-1/2 Z |
| 23 | 88845 | 2 | NUT TOP LK 5/8-11NC 5Z |
| 24 | 89373 | 1 | BLT HEX 1-8NC X 8-1/2 8YZ |
| 25 | 221196 | 1 | MOUNT PLATE – PAINTED GRAY |
| 26 | 222087 | 2 | WHL ASSY 31X13.5 6B 10″ 12P GRAY |
| 27 | 222338 | 1 | HEADLESS PIN(2) 1X4-1/8 |
| 28 | 235245 | 1 | TANDEM PIN |
| 29 | 235801 | 1 | PIVOT PIN (1-1/2 X 10) |
| 30 | 237506 | 2 | ANC X 3-1/2 SPECIAL HEX HEAD BOLT |
| 31 | 237798 | 1 | LOWER OUTER ARM |
| 32 | 241663 | 1 | HYD CYL 4X8 – Inner Wing |
| 33 | 241664 | 1 | HYD CYL 3-3/4X8 – Outer Wing |
| 34 | 242933 | 1 | PIVOT WEAR PLATE |
| 35 | 247798 | 1 | UPPER LINK ARM |
| 36 | 247808 | 1 | MAST ANCHOR |
| 37 | 247811 | 1 | ANCHOR ADJUST |
| 38 | 247814 | 1 | FRONT MAST SUPPORT |
| 39 | 350923 | 1 | FRONT ATD MAST – 2012 |
HDW KIT MAIN FRAME PACKERILIFT ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 12103 | 4 | BEARING CONE 1-3/4ID (25580) |
| 2 | 16154 | 4 | 2-1/2″ HUB & SPINDLE ASSY |
| 3 | 16278 | 2 | BEARING BUSHING |
| 4 | 22022 | 2 | HEADLESS PIN(2) 1-1/4X2-7/16 |
| 5 | 26120 | 4 | 2.251D X 3.40 OD TRIPLE LIP SEAL |
| 6 | 34132 | 8 | AXLE CLAMP ASSEMBLY (RED) |
| 7 | 42082 | 2 | NUT 1-1/2NF HYDRA JAM LOCK |
| 8 | 54599 | 2 | WALKER BEARING BUSHING |
| 9 | 67854 | 8 | HEADLESS PIN(2) 1-1/4X4-1/2 |
| 11 | 88125 | 2 | NUT HEX 1-8NC 5Z |
| 12 | 88131 | 8 | WSHR FLAT 3/4(13/16 X 2ACT) Z |
| 13 | 88181 | 8 | BLT HEX 1-8NC X7 5Z |
| 15 | 88290 | 4 | BLT HEX 3/4-10NC X 2 8YZ |
| 16 | 88291 | 4 | BLT HEX 3/4-10NC X 3 5Z |
| 17 | 88381 | 4 | BLT HEX 5/8-11NC X 4-1/2 5Z |
| 18 | 88398 | 4 | BLT HEX 1-8NC X 4 5Z |
| 19 | 88487 | 8 | BLT HEX 3/4-10NC X 8-1/2 5Z |
| 20 | 88495 | 8 | BLT HEX 7/8-9NC X 2-1/2 5Z |
| 21 | 88602 | 20 | WSHR FLAT 1-1/4(1-3/8 X 3ACT) Z |
| 22 | 88767 | 24 | PIN ROLL 1/4DIA X 2-1/2 Z |
| 23 | 89371 | 4 | BLT HEX 1-8NC X 3-1/2 8YZ |
| 25 | 222259 | 4 | WHL ASSY 31X13.5 8B 10″ 12P |
| 26 | 234811 | 2 | 1/2 X 4 BENT PIN W/HAIRPIN |
| 27 | 234836 | 2 | REAR BRACE TUBE |
| 28 | 235245 | 2 | TANDEM PIN |
| 29 | 350919 | 2 | PACKER LIFT ANCHOR |
| 30 | 240488 | 2 | PACKER LIFT BRACKET |
| 31 | 240567 | 2 | MAIN MAST TUBE |
| 32 | 240572 | 2 | LIFT MAST TUBE |
| 33 | 241513 | 1 | CENTER PACKER HANGER |
| 36 | 241572 | 2 | ADJUSTMENT SCREW |
| 37 | 241584 | 2 | REAR CYLINDER CHANNEL LOCK |
| 38 | 241623 | 2 | HYD CYL 4-3/4X8 SEQ |
| 39 | 247801 | 1 | MAIN FRAME – ATD – 10 INCH – 2010 |
| 40 | 240479 | 1 | CENTER PACKER MOUNT – 5010/6010 |
| 43 | 245697 | 1 | REAR LIFT MAST – LEFT |
| 44 | 245698 | 1 | REAR LIFT MAST – RIGHT |
REAR PACKER ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 33515 | 2 | SPRING TENSION BUSHING (1″) |
| 2 | 57908 | 1 | VALVE ASSEMBLY (STEEL) |
| 3 | 88141 | 4 | NUT JAM 1-8NC 5Z |
| 4 | 88162 | 2 | NUT 2POSLK 3/8-16NC 5P |
| 5 | 88489 | 2 | BLT HEX 3/8-16NCX2-1/2 8YZ |
| 6 | 88661 | 2 | NUT TOP LK 1/2-13NC 5Z |
| 7 | 88665 | 1 | NUT TOP LK 3/4-10NC 5Z |
| 8 | 88680 | 1 | BLT HEX 1/2-13NCX3-1/4 5Z |
| 9 | 89462 | 1 | BLT-HEX 3/4X10NCX10-1/2 8Z |
| 10 | 233508 | 1 | LEFT PACKER ARM |
| 11 | 233509 | 1 | RIGHT PACKER ARM |
| 12 | 237986 | 1 | SPRING PLATE—PAINTED BLACK |
| 13 | 237996 | 4 | WALKER PIVOT WASHER |
| 14 | 239169 | 1 | SPRING – PAINTED BLACK |
| 15 | 241541 | 1 | INNER PACKER PLATE (BLACK) |
| 16 | 241616 | 1 | PACKER RIM 4.5X15 4 BOLT |
| 17 | 241653 | 1 | PACKER SPACER (ZINC) |
| 18 | 243953 | 2 | SPRING CENTERING WASHER/TUBE |
| 19 | 243985 | 2 | 2009 PACKER HUB & SPINDLE ASSY |
| 20 | 240480 | 1 | PACKER WALKER – 10 IN |
| 21 | 241617 | 1 | PACKER TIRE 26/6.50X15 |
| 22 | 350999 | 2 | 4NCX3-3/4 HEXHEAD – WALKER PIVOT BOLT |
| 24 | 351575 | 1 | DOUBLE SPRING ROD – MAIN FRAME ONLY |
| 351575 | 4 | DOUBLE SPRING ROD FN |
REAR HITCH ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 20966F | 4 | HYD CYL 5X30 FGS #A519CY07 |
| 2 | 23039 | 2 | PIN-HAIR .14 X 2.69 ZP |
| 3 | 241625 | 6 | HOSE BRACKET |
| 4 | 241626 | 7 | HOSE CLAMP |
| 5 | 241639 | 1 | REAR HITCH PLATE (RED) |
| 6 | 243908 | 1 | ATD HITCH – SHORT FRONT |
| 7 | 243987 | 1 | PACKER OPEN END WRENCH |
| 8 | 243988 | 1 | PACKER BOX END WRENCH |
| 9 | 245695 | 1 | REAR PULL HITCH – 2010 |
| 10 | 245696 | 2 | REAR HITCH BRACE TUBE |
| 1 | 53419 | 2 | STRAP (RED) |
| 12 | 88293 | 8 | BLT HEX 3/4-10NCX6 5Z |
| 13 | 88515 | 6 | BLT-U 3/8-16NCX4X2-3/4 Z |
| 14 | 88531 | 7 | BLT HEX 3/8-16NCX3 5Z |
| 15 | 89029 | 4 | BLT HEX 1-1/4-7NC X 4 5Z |
| 16 | 89389 | 6 | BLT HEX 3/4-10NCX2-1/2 8YZ |
LIFT SENSOR MOUNT ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 241677 | 1 | SENSOR MOUNT |
| 2 | 241678 | 1 | SENSOR PLATE |
| 3 | 241679 | 1 | TIE STRAP |
| 4 | 88145 | 1 | BLT-U 5/8-11NCX4X5-1/4 Z |
| 5 | 88676 | 2 | BLT HEX 1/2-13NC X 6-1/2 5Z |
SHANK ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 10210 | 2 | ADJUSTMENT BOLT |
| 2 | 56908 | 2 | 1/2″ SPRING TENSION BUSHING |
| 3 | 58032 | 2 | HDN 1/2 X 2-1/2 BOLT |
| 4 | 88141 | 2 | NUT JAM 1-8NC 5Z |
| 5 | 88356 | 1 | NUT 2POSLK 3/4-10NC 5Z |
| 6 | 88369 | 2 | NUT 2POSLK 5/8-11NC 5Z |
| 7 | 88421 | 1 | BLT HEX 3/4-10NC X 4-1/2 5Z |
| 8 | 88441 | 1 | BLT-U 5/8-11NCX2X3-1/4 Z |
| 9 | 88548 | 2 | WSHR FLAT 3/4SAE(13/16 X 1-1/2) Z |
| 10 | 88621 | 2 | NUT NLK 1/2-13NC 5Z |
| 11 | 88933 | 2 | BLT HEX 5/8-11NC X 6 8YZ |
| 12 | 89385 | 2 | BLT HEX 3/4-16NF X 6-1/2 8YZ |
| 13 | 89386 | 2 | NUT NYL 3/4-16NF 8YZ |
| 14 | 89398 | 2 | BLT HEX 5/8-11NC X 6-1/2 8YZ |
| 15 | 241674 | 12 | 3/8 IN SHANK SHIM (ZINC) |
| 16 | 241675 | 1 | SHANK SHIM KIT – 12 EA |
| 17 | 243956 | 1 | CAST TOP PLATE (BLACK) |
| 18 | 243959 | 1 | 54 DEG 32IN CP SHK (BLACK) |
| 19 | 243961 | 1 | SHANK EDGE ON (BLACK) |
| 20 | 244576 | 1 | SHANK MOUNT TOOL |
| 21 | 251696 | 1 | CAST SPRING PLUG (BLACK) |
| 22 | 350988 | 1 | SHANK PIVOT BOLT |
| 23 | 351550 | 1 | DUCTILE PIVOT (BLACK) |
| 24 | 351551 | 1 | SHANK SPRING BRACKET (BLACK) |
| 25 | 351662 | 1 | CHISEL PLOW SHANK 650LB (BLACK) |
| 26 | 351663 | 1 | EDGE-ON CHISEL SHANK 650LB (BLACK) |
| 27 | 351697 | 1 | SPRING ASSY W/PLUGS (BLACK) |
| 28 | 351698 | 1 | CAST SPRING YOKE (BLACK) |
| 29 | 351699 | 1 | EXTENSION SPRING (BLACK) |
| 30 | 88630 | 2 | WSHR FLT 5/8SAE(21/32 X 1-5/16) Z |
| 31 | 243957 | 1 | SHANK HOLDER FRAME BRKT (BLACK) |
LOCATE SHORT MOUNTS ON
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 88104 | 6 | NUT HEX 1/2-13NC 5Z |
| 2 | 88303 | 4 | WSHR HLK 1/21D(9/16ACT) Z |
| 3 | 88446 | 2 | SCR SET 1/2-13NC X 1SQHD Z |
| 4 | 88770 | 1 | PIN ROLL 3/8DIA X 2-1/2 Z |
| 5 | 88838 | 4 | BLT HEX 5/8-11NC X 1-3/4 5Z |
| 6 | 88845 | 4 | NUT TOP LK 5/8-11NC 5Z |
| 7 | 88873 | 4 | BLT CRG 1/2-13NC X 1-1/2 5Z |
| 9 | 234261 | 1 | 20″ RIPPLE BLADE |
| 10 | 234262 | 1 | LOCKING COLLAR CLYMER COULTER |
| 11 | 234264 | 1 | CLYMER COULTER ASSY W/HARDWARE |
| 12 | 235806 | 1 | SHORT SHAFT – 1-1/2 IN DIACOULTER |
| 13 | 350915 | 1 | CP SHANK COULTER MOUNT – SHORT |
| 14 | 351508 | 1 | COULTER MOUNT 2012 |
| 1 | 10344 | 2 | BEARING CUP 2.328 OD (LM67010) |
| 2 | 10345 | 2 | BEARING CONE 1-1/4ID (LM67048) |
| 3 | 19949 | 1 | 3/41D SPINDLE WASHER |
| 4 | 86558 | 1 | NUT SLTD 5/8-18NF 5 |
| 5 | 88119 | 1 | BLT HEX 3/4-16NF X 3 52 |
| 6 | 88306 | 2 | NUT 2POSLK 3/4-16NF 5Z |
| 7 | 88356 | 1 | NUT 2POSLK 3/4-10NC 52 |
| 8 | 88559 | 1 | PIN COT 5/32DIA X 1Z |
| 9 | 88602 | 1 | WSHR FLAT 1-1/4(1-3/8 X 3ACT) Z |
| 10 | 234252 | 1 | 2 PIECE GREASE SEAL CLYMER W40-2 |
| 11 | 234255 | 1 | 4-BOLT HUB CLYMER W23 |
| 12 | 234256 | 1 | DUST CAP CLYMER W50 |
| 13 | 234257 | 1 | SWING ARM CLYMER N347-4 |
| 14 | 234258 | 1 | FLANGED BUSHING CLYMER N347-6 |
| 16 | 234260 | 1 | COULTER SPRING CLYMER S233 |
| 17 | 234263 | 1 | NYLON BUSHING CLYMER N347-7 |
| 18 | 234264 | 1 | CLYMER COULTER ASSY W/HARDWARE |
| 19 | 234265 | 1 | SPRING ROD CLYMER N347-5 |
| 20 | 236553 | 1 | SPRING BUSHING CASTING |
UNIVERSAL DISC LEVELER – VERSION A
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 67415 | 1 | CARRIER-CENTER PC |
| 2 | 88303 | 8 | WSHR HLK 1/21D(9/16ACT) Z |
| 3 | 88104 | 8 | NUT-HEX: .50 NC ZP |
| 4 | 67402 | 4 | BOLT-CARR 1/2-13X3 1-1/2 THRD ZP |
| 5 | 67133 | 2 | PLATE-BACKING ZP |
| 6 | 344003 | 1 | NUT-CENTERLOCK LUG .75 NC ZP |
| 7 | 67409 | 1 | SPACER-CENTER CARRIER |
| 8 | 67207 | 1 | SPRING-TORSION UNIVERSAL |
| 9 | 34820 | 1 | BOLT-CRG .75 X 5.75 |
| 10 | 67482 | 1 | ASSY-DISC LEVELER ARM |
| 11 | 344042 | 1 | PLATE-WING A UNIVERSAL LONG |
| 12 | 344043 | 1 | PLATE-WING B UNIVERSAL LONG |
| 13 | 67934 | 2 | ARM-SHIFTER ZP |
| 14 | 88475 | 4 | BLT HEX 1/2-13NC X 1-1/2 5Z |
| 15 | 33036 | 4 | WASHER-FLAT: .50 ZP HD |
| 16 | 89010 | 4 | BLT CRG 3/8-16NC X 1-1/4 5Z |
| 17 | 88103 | 4 | NUT HEX 3/8-16NC 5Z |
| 18 | 66479 | 1 | ASSY-RIGHT DISC ARM |
| 19 | 66478 | 1 | ASSY-LEFT DISC ARM |
| 20 | 344105 | 1 | WLDMT-HOSE HOLDER |
| 21 | 344044 | 1 | U-BOLT: .250 X 2.00 X 2 X 2.00 |
| 22 | 89501 | 2 | NUT TOP LK 1/4-20NC 5Z |
UNIVERSAL DISC LEVELER – VERSION B
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 344094 | 1 | CARRIER-CENTER PC |
| 2 | 88303 | 8 | WSHR HLK 1/2ID(9/16ACT) Z |
| 3 | 88104 | 8 | NUT-HEX: .50 NC ZP |
| 4 | 67402 | 4 | BOLT-CARR 1/2-13X3 1-1/2 THRD ZP |
| 5 | 67133 | 2 | PLATE-BACKING ZP |
| 6 | 88356 | 1 | NUT 2POSLK 3/4-10NC 5Z |
| 7 | 67409 | 1 | SPACER-CENTER CARRIER |
| 8 | 67207 | 1 | SPRING-TORSION UNIVERSAL |
| 9 | 344109 | 1 | BOLT-HExX: .75 X 6 X 1.00 THD NC GR5 ZP |
| 10 | 344097 | 1 | ASSY-DISC LEVELER ARM |
| 11 | 344042 | 1 | PLATE-WING A UNIVERSAL LONG |
| 12 | 344043 | 1 | PLATE-WING B UNIVERSAL LONG |
| 13 | 89501 | 2 | NUT TOP LK 1/4-20NC 5Z |
| 14 | 88475 | 4 | BLT HEX 1/2-13NC X 1-1/2 5Z |
| 15 | 33036 | 4 | WASHER-FLAT: .50 ZP HD |
| 16 | 89010 | 4 | BLT CRG 3/8-16NC X 1-1/4 5Z |
| 17 | 88103 | 4 | NUT HEX 3/8-16NC 5Z |
| 18 | 66479 | 1 | ASSY-RIGHT DISC ARM |
| 19 | 66478 | 1 | ASSY-LEFT DISC ARM |
| 20 | 344105 | 1 | WLDMT-HOSE HOLDER |
| 21 | 344044 | 1 | U-BOLT: .250 X 2.00 X 2 X 2.00 |
4 BOLT PACKER HUB & SPINDLE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 10344 | 2 | BEARING CUP 2.328 OD (LM67010) |
| 2 | 10345 | 2 | BEARING CONE 1-1/4ID (LM67048) |
| 3 | 244585 | 1 | PACKER SPINDLE |
| 4 | 88340 | 1 | NUT SLTD 7/8-14NF 5Z |
| 5 | 89461 | 4 | BLT-WHL 1/2-20 UNF X .75 |
| 6 | 88354 | 1 | WSHR FLT 7/8SAE(15/16 X 1-3/4) Z |
| 7 | 88550 | 1 | FTG GRS 1/4-28 3038-B |
| 8 | 88560 | 1 | PIN COT 1/8DIAX1-1/4Z |
| 12 | A33879 | 1 | HUB CAP |
HYDRAULIC STOP COLLARS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 241645 | 2 | 1/2IN CYLINDER STOP (RED) | |
| 241646 | 1 | 5/8IN CYLINDER STOP (ORANGE) | |
| 241647 | 2 | 3/4IN CYLINDER STOP (YELLOW) | |
| 241649 | 2 | 1-1/2IN CYLINDER STOP (GRAY) | |
| 244587 | 1 | 1-1/4IN CYLINDER STOP (GREEN) | |
| 244586 | 1 | 1-716 INCYLINDER STOP (BLUE) |
2M/18.3M TRANSPORT LIFT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 5 | 25580 | 4 | ELB 8MORB X 8MJ |
| 7 | 56539 | 2 | HSE 3KPSI 3/8X50 8FJX-8F JX |
| 8 | 60640 | 2 | QUICK DISCONNECT COUPLER |
| 10 | 237264 | 2 | HSE 3KPSI 1/2X234 8FJX-8F JX |
HOSE ROUTING – 15.2 M (50FT) MAIN LIFT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 237264 | 2 | HSE 3KPSI 1/2X234 8FJX-8FJX |
| 2 | 233688 | 2 | HSE 3KPSI 3/8X252 8FJX-8FJX |
| 3 | 233689 | 2 | HSE 3KPSI 3/8X180 8FJX-8F JX |
| 4 | 234939 | 2 | HSE 3KPSI 3/8X220 8FJX-8F JX |
| 5 | 234947 | 6 | HSE 3KPSI 3/8X194 8FJX-8FJX |
| 6 | 15515 | 2 | HSE 3KPSI 3/8X62 8FJX-8F JX |
| 8 | 13234 | 2 | ADP 8MJ X 8MPT |
| 9 | 60640 | 2 | QUICK DISCONNECT COUPLER |
| 10 | 13238 | 2 | TEE 8MJ X 8MJ X 8MJ |
| 11 | 25580 | 24 | ELD 8MORB X 8MJ |
| 12 | 13239 | 2 | APD UNION 8MJ X8MJ |
HOSE ROUTING – 15.2 M (50FT) MAIN FOLD
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 56539 | 4 | HSE 3KPSI 3/8X50 8FJX-8F JX |
| 2 | 240261 | 2 | HSE 3KPSI 1/2X36 8FJX-8F JX |
| 3 | 239088 | 3 | HSE 3KPSI 1/2X18 8FJX-8F JX |
| 4 | 13483 | 2 | HSE 3KPSI 3/8X120 8FJX-8F JX |
| 5 | 237264 | 2 | HSE 3KPSI 1/2X234 8FJX-8F JX |
| 6 | 233689 | 2 | HSE 3KPSI 3/8X180 8FJX-8F JX |
| 7 | 59909 | 4 | HSE 3KPSI 3/8X168 8FJX-8F JX |
| 8 | 13268 | 4 | HSE 3KPSI 3/8X78 8F JX-8F JX |
| 9 | 13234 | 2 | ADP 8MJ X 8MPT |
| 10 | 60640 | 2 | QUICK DISCONNECT COUPLER |
| 1 | 13238 | 2 | TEE 8MJ X 8MJ X 8MJ |
| 12 | 56534 | 8 | TEE 8MJ X 8MJ X 8MORB |
| 13 | 25580 | 10 | ELB 8MORB X 8MJ |
| 14 | 15910 | 2 | CROSS 8MJ X 8MJ X 8MJ X 8MJ |
| 15 | 65870 | 1 | SEQUENCE VALVE |
| 16 | 13239 | 2 | UNION 8MJ X 8MJ |
HOSE ROUTING – 18.3 M (60FT) WING FOLD
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 56539 | 4 | HSE 3KPSI 3/8X50 8F JX-8FJX |
| 2 | 240261 | 4 | HSE 3KPSI 1/2X36 8FJX-8F JX |
| 3 | 239088 | 1 | HSE 3KPSI 1/2X18 8FJX-8F JX |
| 4 | 13483 | 2 | HSE 3KPSI 3/8X120 8FJX-8F JX |
| 5 | 237264 | 2 | HSE 3KPSI 1/2X234 8FJX-8F JX |
| 6 | 233689 | 2 | HSE 3KPSI 3/8X180 8FJX-8F JX |
| 7 | 234939 | 2 | HSE 3KPSI 3/8X220 8FJX-8F JX |
| 8 | 234947 | 2 | HSE 3KPSI 3/8X194 8FJX-8FJX |
| 9 | 13268 | 4 | HSE 3KPSI 3/8X78 8FJX-8FJX |
| 10 | 13234 | 2 | ADP 8MJ X 8MPT |
| 12 | 13238 | 2 | TEE 8MJ X 8MJ X 8MJ |
| 13 | 56534 | 8 | TEE 8MJ X 8MJ X 8MORB |
| 16 | 65870 | 1 | SEQUENCE VALVE |
| 17 | 13239 | 2 | UNION 8MJ X 8MJ |
HOSE ROUTING – REAR SEEDER SUPPLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 60640 | 3 | QUICK DISCONNECT COUPLER |
| 2 | 236170 | 1 | DOUBLE ACTING FEMALE CPLR (4250-4P) |
| 3 | 239899 | 1 | 1/2 FEMALE QUICK COUPLER |
| 4 | 240301 | 2 | 3/4 QUICK FEMALE COUPLER |
| 5 | 241747 | 2 | HSE 3KPSI 3/4X456 8MPT-12MPT |
| 6 | 241748 | 1 | HSE 3KPSI 1/2X456 8MPT-8MPT |
DECAL PLACEMENT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 22372 | 12 | AMBER REFLECTOR |
| 2 | 997854 | 8 | DECAL FOLDING WINGS DANGER |
| 3 | 997860 | 1 | DECAL READ MANUAL WARNING |
| 4 | 997863 | 1 | DECAL HIGH VOLTAGE |
| 5 | 997864 | 6 | DECAL LOCKOUT WARNING |
| 6 | 9971010 | 2 | DECAL CHEMICAL HAZARD WARNING |
| 7 | 9971017 | 1 | DECAL SPEED SIGN 15 MILE/HR |
| 8 | 9971163 | 1 | DECAL SAFETY SET |
| 12 | A1030712 | 12 | DECAL – DEPTH STOP |
SAFETY LIGHTS MOUNTING
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 223126 | 4 | LIGHT/REFLECTOR BRACKET |
| 2 | 223143 | 2 | AG LIGHT, SINGLE AMBER TRI-PLUG |
| 3 | 223144 | 2 | AG LIGHT, SINGLE RED TRI-PLUG |
| 4 | 223160 | 2 | 12 LIGHT ARM |
| 5 | 240238 | 2 | 48IN OFFSET LIGHT ARM W/LOCK |
| 6 | 88103 | 12 | NUT HEX 3/8-16NC 5Z |
| 7 | 88172 | 16 | NUT HEX 1/4-20NC 5Z |
| 8 | 88203 | 16 | BLT HEX 1/4-20NCX1 5Z |
| 9 | 88262 | 16 | WSHR HLK 1/4ID(5/16ACT) Z |
| 10 | 88362 | 2 | WSHR HLK 3/81D Z |
| 1 | 88702 | 10 | SCR SET 3/8NCX3/4 SQHD CUP-PT P |
| 12 | 89034 | 2 | BLT HEX 3/8NC X 1 5Z |
SAFETY LIGHTS MODULE MOUNTING
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 344112 | 1 | PLATE-SAFETY LIGHT MODULE MOUNT |
| 2 | 88104 | 1 | NUT HEX 1/2-13NC 52 |
| 3 | 88203 | 4 | BLT HEX 1/4-20NC X 1 5Z |
| 4 | 88303 | 2 | WSHR HLK 1/2ID(9/16ACT) 2 |
| 5 | 89270 | 1 | BLT-U 1/2-13NC X4 X 5-1/4Z |
| 6 | 89501 | 4 | NUT TOP LK 1/4-20NC 5Z |
| 7 | A65341 | 1 | MODULE-INTERFACE |
ISOBUS AND OPTIONAL NH3 MODULE MOUNTING
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 3 | 89522 | 2 | SCREW-P-H: .19 X .50 NC SS |
| 4 | 330341 | 1 | MODULE-NH3 W/SW -AMD2305 V3_01 |
| 5 | 320562 | 1 | HARNESS-TOOLBAR ISOBUS |
| 6 | 1032059 | 4 | NUT-K-LOCK: 18-8SS .19 (10-24)NC |
| 1 | 30651 | 1 | SMV EMBLEM 8276.6 |
| 2 | 88103 | 2 | NUT HEX 3/8-16NC 5Z |
| 3 | 88172 | 2 | NUT HEX 1/4-20NC 5Z |
| 4 | 88261 | 2 | WSHR FLAT 1/4(5/16 X 3/4ACT) Z |
| 5 | 88262 | 2 | WSHR HLK 1/41D(5/46ACT) Z |
| 6 | 88362 | 2 | WSHR HLK 3/8ID Z |
| 7 | 88385 | 1 | BLT-U 3/8-16NCX4X5 Z |
| 8 | 88993 | 2 | BLT HEX 1/4-20NC X 3/4 5Z |