Challenger PH13 Pickup Header
Challenger PH13 Pickup Header — parts list
477 part numbers across 1 assemblies, transcribed from the catalogue above. Search this page for a part number to find the assembly it belongs to.
Parts list
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 71392420 | 1 | FRAME, HEADER W/DECALS |
| 2 | 71393769 | 1 | PANEL, HEADER LH |
| 3 | 71392425 | 2 | PLATE, SKID |
| 4 | 71392393 | 1 | BAR, STRIPPER LH |
| 5 | 71392405 | 2 | BAR, STRIPPER UPPER |
| 6 | 71392388 | 1 | LEVER, SHIELD LOCKING LH |
| 7 | 71392389 | 1 | SPRING, LOCKING LEVER RH (NOT SHOWN) |
| 8 | 71392391 | 4 | HINGE, SHIELD |
| 9 | 71392511 | 1 | LOCK, ROTARY LH |
| 10 | 71392124 | 1 | SHEET, BOTTOM HEADER REPAIR |
| 11 | 71392410 | 1 | PLATE, HOSE CLAMP |
| 12 | 71392431 | 2 | STAND, HEADER |
| 13 | 71392101 | 4 | BUMPER, RUBBER |
| 14 | 71392560 | 8 | BOLT, CARRIAGE M6 X 1 X 20MM |
| 15 | 71392563 | 10 | BOLT, CARRIAGE M8 X 1.25 X 20MM |
| 16 | 71392565 | 10 | BOLT, CARRIAGE M8 X 1.25 X 25MM |
| 17 | 71392564 | 3 | BOLT, HEX M8 X 1.25 X 20MM |
| 18 | 71392575 | 4 | BOLT, M12 X 1.75 X 25MM |
| 19 | 70921960 | 2 | SCREW, HEX HEAD 1/4-20 UNC X1 |
| 20 | 71392116 | 2 | PIN, 3/8 X 2-1/4 LOCK |
| 21 | 1102797 | 14 | WASHER, LOCK 6MM |
| 22 | 390972X1 | 23 | WASHER, FLAT 8MM |
| 23 | 70918266 | 2 | WASHER, FLAT 10MM |
| 24 | 70950230 | 4 | WASHER, FLAT 12MM |
| 25 | Y705269 | 8 | WASHER, LOCK 6MM |
| 26 | 1177981 | 23 | WASHER, LOCK 8MM (13FT) |
| 27 | 1102801 | 4 | WASHER, LOCK 12MM |
| 28 | 70950995 | 8 | NUT, M6 X 1 |
| 29 | 71392582 | 22 | NUT, M8 X 1.25 (13FT) |
| 30 | 71392114 | 1 | BRACKET, DRIVE SHAFT STORAGE |
| 31 | 71393772 | 1 | CAP, PLUG STORAGE |
| 32 | 71392561 | 2 | CAPSCREW, M6 X 1 X 16MM |
| 33 | 70950984 | 2 | NUT, NYLOCK M6 |
| 34 | 71392584 | 2 | NUT, M12 |
| 1 | 71392372 | 1 | MOUNT, AUGER RH |
| 2 | 71392371 | 1 | PLATE, AUGER RETAINER FRONT |
| 3 | 71392376 | 1 | ROD ASSEMBLY, AUGER PIVOT |
| 4 | 71392407 | 1 | SPACER, AUGER PIVOT |
| 5 | 71392368 | 1 | ADJUSTER LOWER LIMIT |
| 6 | 71392401 | 2 | STOPPER, RUBBER |
| 7 | 71392370 | 4 | BUSHING, RUBBER STOP |
| 8 | 71392369 | 1 | STOP, PLATE RETAINER |
| 9 | 71392384 | 1 | BRACKET, CHAIN TIGHTENER |
| 10 | 71392385 | 1 | BOLT, EYE |
| 11 | 71392386 | 1 | SPACER, IDLER |
| 12 | 71392426 | 1 | BRACKET, DRIVE SHAFT |
| 13 | 71392402 | 1 | WASHER, 13MM X 50MM X 5MM THK |
| 14 | 71392406 | 1 | SPACER, DRIVE SHAFT |
| 15 | 71392381 | 1 | SHAFT, JACK |
| 16 | 71392399 | 1 | SHIELD, SHAFT |
| 17 | 71392510 | 1 | LOCK, ROTARY – DRIVE SIDE |
| 18 | 71392464 | 2 | HOUSING, PF208 PRESSED FLANGED (PAIR) |
| 19 | 71393773 | 1 | BEARING |
| 20 | 71392469 | 1 | SPROCKET, IDLER 60A13 X 5/8″ |
| 21 | 71392462 | 2 | BEARING |
| 22 | 71392566 | 3 | BOLT, CARRIAGE M10 X 1.5 X 20MM |
| 23 | 71392568 | 4 | BOLT, CARRIAGE M10 X 1.5 X 50MM |
| 24 | 71392567 | 1 | BOLT, CARRIAGE M10 X 1.5 X 25MM |
| 25 | 71392571 | 8 | BOLT, CARRIAGE M12 X 1.75 X 30MM |
| 26 | 71392573 | 4 | BOLT, CARRIAGE M12 X 1.75 X 45MM |
| 27 | 71392580 | 1 | BOLT, M16 X 2 X 150MM |
| 28 | 71392155 | 1 | BOLT, CARRIAGE M16 X 2 X 100MM |
| 29 | 71392579 | 4 | BOLT, M16 X 2 X 110MM |
| 30 | 71392572 | 1 | BOLT, HEX M12 X 1.75 X 35MM |
| 31 | 70918266 | 4 | WASHER, FLAT 10MM |
| 32 | 70950230 | 16 | WASHER, FLAT 12MM |
| 33 | 70950232 | 12 | WASHER, FLAT 16MM |
| 34 | 70950978 | 8 | LOCKNUT, M10 X 1.5 |
| 35 | 71392585 | 12 | LOCKNUT, M12 X 1.75 |
| 36 | 71392584 | 6 | WASHER, LOCK 12MM |
| 37 | 71392586 | 10 | NUT, M16 X 2 |
| 38 | 1102803 | 6 | WASHER, LOCK 16MM |
| 39 | 70921960 | 2 | SCREW, HEX HEAD 1/4-20 UNC X 1″ |
| 40 | 71392404 | 1 | SPROCKET, 16 TEETH |
| 41 | 71400786 | 1 | CHAIN, HEADER DRIVE, #60 |
| 42 | 71392471 | 1 | LINK, CHAIN CONNECTOR #60 |
| 43 | 71393774 | 5 | SHIM, PLATE |
| 44 | 71393775 | 1 | SPROCKET, AUGER DRIVE |
| 45 | 71400751 | 1 | WASHER, THRUST NON PLATED |
| 46 | 71400752 | 1 | PLATE, LOCKING |
| 47 | 71400753 | 2 | CAPSCREW, M10 X 1.5 X 30MM |
| 48 | 71400754 | 1 | FLANGE, PAIR 4 BOLT |
| 1 | 71392108 | 1 | MOUNT, AUGER LH |
| 2 | 71392371 | 1 | RETAINER, PLATE FRONT AUGER |
| 3 | 71392376 | 1 | ROD ASSEMBLY, AUGER PIVOT |
| 4 | 71392407 | 1 | SPACER, AUGER PIVOT |
| 5 | 71392109 | 1 | BRACKET, FINGER ADJUST |
| 6 | 71392165 | 1 | KEY, 8 X 10 X 75 |
| 7 | 71392380 | 1 | HUB, IDLER |
| 8 | 71392368 | 1 | ADJUSTER LOWER LIMIT |
| 9 | 71392401 | 2 | STOPPER, RUBBER |
| 10 | 71392370 | 4 | BUSHING, RUBBER STOP |
| 11 | 71392369 | 1 | STOP, PLATE RETAINER |
| 12 | 71392566 | 3 | BOLT, CARRIAGE M10 X 1.5 X 20MM |
| 13 | 71392568 | 4 | BOLT, CARRIAGE M10 X 1.5 X 50MM |
| 14 | 70950376 | 1 | CAPSCREW, HEX, M10 X 1.5 X 30MM |
| 15 | 71392573 | 4 | BOLT, CARRIAGE M12 X 1.75 X 45MM |
| 16 | 71392580 | 1 | BOLT, M16 X 2 X 150MM |
| 17 | 70918266 | 3 | WASHER, FLAT 10MM |
| 18 | 70950230 | 4 | WASHER, FLAT 12MM |
| 19 | 70950232 | 2 | WASHER, FLAT 16MM |
| 20 | 1102803 | 1 | WASHER, LOCK 16MM |
| 21 | 70950978 | 7 | NUT, LOCK M10 X 1.5 |
| 22 | 71392585 | 4 | NUT, LOCK M12 X 1.75 |
| 23 | 71392586 | 5 | NUT, M16 X 2 |
| 24 | 71400755 | 1 | NUT, M10 X 1.25 |
| 1 | 71392110 | 1 | WELDMENT, AUGER 13′ |
| 2 | 71400779 | 1 | SHAFT, AUGER DRIVE |
| 3 | 71392374 | 4 | CLAMP, FINGER SUPPORT |
| 4 | 71392403 | 1 | SHAFT, STUB |
| 5 | 71392396 | 1 | SHAFT, FINGER SUPPORT |
| 6 | 71392427 | 24 | HOLDER, FINGER |
| 7 | 2499640W1 | 18 | FINGER |
| 8 | 71392112 | 1 | SHAFT, FINGER CRANK (13FT.) |
| 9 | 71392397 | 5 | COVER, HAND HOLE |
| 10 | 71400787 | 10 | COVER, FINGER HOLE |
| 11 | 2500000W1 | 18 | GUIDE, FINGER |
| 12 | 71392493 | 18 | PIN, HITCH |
| 13 | 71392463 | 3 | BEARING, AILPF207-106W3 W/COLLAR |
| 14 | 71392465 | 3 | HOUSING, PF207 PRESSED FLANGED (PAIR) |
| 15 | 70950002 | 78 | BOLT, M6 X 1 X 20 HEX HD |
| 16 | 70950377 | 5 | BOLT, M12 X 1.75 X 30MM |
| 17 | 71392569 | 4 | BOLT, M10 X 1.5 X 75 |
| 18 | 71392585 | 5 | NUT, M12 X 1.75 |
| 19 | 71392587 | 48 | WASHER, FLAT 6MM LARGE O.D. |
| 20 | 70918266 | 19 | WASHER, FLAT 10MM |
| 21 | 70950230 | 5 | WASHER, FLAT, M12 |
| 22 | Y705269 | 30 | WASHER, LOCK 6MM |
| 23 | 70950984 | 24 | NUT, LOCK M6 X 1 |
| 24 | 71392581 | 30 | NUT, ANCHOR M6 X 1 |
| 25 | 70950978 | 19 | NUT, LOCK M10 X 1.5 |
| 26 | 71400756 | 1 | FLIGHT EXTENSION, AUGER (LH) |
| 27 | 71392565 | 12 | BOLT, CARRIAGE M8 X 1.25 X 25MM |
| 28 | 390972X1 | 20 | WASHER, FLAT M8 |
| 29 | 1177981 | 16 | WASHER, LOCK M8 |
| 30 | 71392582 | 16 | NUT, HEX M8 X 1.25 |
| 31 | 70951035 | 4 | SOCKET, BUTTON HEAD HEX M8X1.25X25MM |
| 1 | 71392110 | 1 | WELDMENT, AUGER 13′ |
| 2 | 71392111 | 1 | SHAFT, AUGER DRIVE |
| 3 | 71392374 | 4 | CLAMP, FINGER SUPPORT |
| 4 | 71392403 | 1 | SHAFT, STUB |
| 5 | 71392396 | 1 | SHAFT, FINGER SUPPORT |
| 6 | 71392427 | 24 | HOLDER, FINGER |
| 7 | 2499640W1 | 14 | FINGER |
| 8 | 71392112 | 1 | SHAFT, FINGER CRANK (13FT.) |
| 9 | 71392397 | 5 | COVER, HAND HOLE |
| 10 | 71400787 | 10 | COVER, FINGER HOLE |
| 11 | 2500000W1 | 14 | GUIDE, FINGER |
| 12 | 71392493 | 14 | PIN, HITCH |
| 13 | 71392463 | 3 | BEARING, AILPF207-106W3 W/COLLAR |
| 14 | 71392465 | 3 | HOUSING, PF207 PRESSED FLANGED (PAIR) |
| 15 | 70950002 | 78 | BOLT, M6 X 1 X 20 HEX HD |
| 16 | 70950377 | 5 | BOLT, M12 X 1.75 X 30MM |
| 17 | 71392569 | 4 | BOLT, M10 X 1.5 X 75 |
| 18 | 71392585 | 5 | NUT, M12 X 1.75 |
| 19 | 71392587 | 48 | WASHER, FLAT 6MM LARGE O.D. |
| 20 | 70918266 | 19 | WASHER, FLAT 10MM |
| 21 | 70950230 | 5 | WASHER, FLAT M12 |
| 22 | Y705269 | 30 | WASHER, LOCK 6MM |
| 23 | 70950984 | 24 | NUT, LOCK M6 X 1 |
| 24 | 71392581 | 30 | NUT, ANCHOR M6 X 1 |
| 25 | 70950978 | 19 | NUT, LOCK M10 X 1.5 |
| 26 | 71393759 | 1 | FLIGHT EXTENSION, AUGER (RH) |
| 27 | 71392565 | 8 | BOLT, CARRIAGE M8 X 1.25 X 25MM |
| 28 | 390972X1 | 16 | WASHER, FLAT M8 |
| 29 | 1177981 | 12 | WASHER, LOCK M8 |
| 30 | 71392582 | 12 | NUT, HEX M8 X 1.25 |
| 31 | 70951035 | 4 | SOCKET, BUTTON HEAD HEX M8X1.25X25MM |
| 1 | 71392394 | 2 | ASSEMBLY, EXTREMITY LIGHT |
| 2 | 71392416 | 1 | BRACKET, EXTREMITY LIGHT W/DECALS LH |
| 3 | 71392400 | 2 | SHIELD, EXTREMITY LIGHT |
| 4 | 71392508 | 4 | U-BOLT, M8X1.25, W=37MM, L=55MM |
| 5 | 390972X1 | 8 | WASHER, FLAT 8MM |
| 6 | 71392582 | 8 | NUT, M8 X 1.25 |
| 7 | 1102550 | 2 | BULB 12V-21W SINGLE FILAMENT |
| 8 | 71392517 | 4 | LENS (AMBER) |
| 9 | 70950995 | 6 | NUT, M6 X 1 |
| 10 | 70950227 | 6 | WASHER, FLAT 6MM |
| 11 | 71392561 | 6 | BOLT, M6 X 1 X 16MM |
| 12 | 71392113 | 4 | CLAMP, NYLON-LOOM |
| 13 | 700717402 | 2 | DECAL (RED) |
| 14 | 700717403 | 2 | DECAL (YELLOW/AMBER) |
| 15 | 700717404 | 2 | DECAL (FLUORESCENT ORANGE) |
| 16 | 71400758 | 1 | HARNESS, WIRING |
| 17 | 71392168 | 4 | RIVET, 1/8 X .640 X .376-.500 |
| 18 | 1177981 | 8 | WASHER, LOCK 8MM |
| 19 | 1102797 | 6 | WASHER, LOCK 6MM |
| 1 | 71391725 | 1 | HARNESS, ADAPTER |
| 2 | 71396959B | 1 | BRACKET, HEADER CONN. PRE 2003 |
| 3 | 71391708 | 1 | HARNESS, ADAPTER |
| 4 | 700706922 | 1 | CAP, ELECTRICAL PLUG |
| 1 | 71400762 | 1 | DECAL, CHALLENGER (LH) |
| 2 | 111091W1 | 1 | DECAL, DANGER, BELT/CHAIN |
| 3 | 111095W1 | 2 | DECAL, DANGER, HEADER FALLING |
| 4 | 71400761 | 1 | DECAL, EUROPEAN |
| 1 | 71392414 | 1 | HOSE, 1/2 X 3900MM 1/2MNPT X 10MORB |
| 2 | 71392415 | 1 | HOSE, 1/2 X 2500MM 1/2MNPT X 10MORB |
| 3 | 71392115 | 1 | HOSE, 3/8 X 3200MM 3/8MNPT X 6FJIC |
| 4 | 71328361 | 1 | COUPLER, 1/4″ (M) AEROQUIP X 3/8″ NPT |
| 5 | 71358564 | 1 | COUPLER, WING TYPE MALE |
| 6 | 71365883 | 1 | COUPLER, WING TYPE FEMALE |
| 7 | 71392450 | 1 | CLAMP, HYCON PAIR, 22MM |
| 8 | 71392448 | 1 | CLAMP, HYCON PAIR, 19MM |
| 9 | 71392449 | 2 | PLATE, HOSE CLAMP TOP |
| 10 | 70921205 | 2 | O-RING |
| 11 | 71392508 | 1 | U-BOLT, M8X1.25, L=55, W=37 |
| 12 | 70921958 | 4 | BOLT, 1/4″-20 X 1-1/2″ UNC |
| 13 | 71392582 | 4 | NUT, M8 X 1.25 |
| 1 | 71392428 | 1 | FRAME, ADAPTER AGCO |
| 2 | 71392439 | 1 | ADAPTER, SHIELD AGCO |
| 3 | 71392445 | 1 | ADAPTER, TOP SHIELD AGCO |
| 4 | 71392429 | 1 | BRACKET, MOUNTING LH, ADAPTER |
| 5 | 71392430 | 1 | BRACKET, MOUNTING RH, ADAPTER |
| 6 | 71392441 | 1 | *BAR, STRIPPER (LOWER LH) |
| 7 | 71392435 | 4 | *BRACKET, STRIPPER BAR |
| 8 | 71392169 | 2 | BRACKET, STRIPPER BAR EXT. |
| 9 | 71392437 | 2 | *BAR, STRIPPER (UPPER RH) |
| 10 | 71392117 | 1 | *EXTENSION, FACE SHIELD (LH) |
| 11 | 71392160 | 2 | PLATE, FILLER AGCO |
| 12 | 71392170 | 1 | EXTENSION, FACE SHIELD (RH) |
| 13 | 71393753 | 2 | *BAR, STRIPPER EXTENSION |
| 14 | 70950002 | 6 | BOLT, M6 X 1 X 20 HEX HD CI8.8 PL |
| 15 | 71392560 | 6 | SCREW, HEX SOCK, M8X20, BTN HD |
| 16 | 71392565 | 32 | *BOLT, CARRIAGE M8 X 1.25 X 25MM |
| 17 | 71392572 | 12 | BOLT, M12 X 1.75 X 35MM |
| 18 | 71392575 | 2 | BOLT, M12 X 1.75 X 25MM |
| 19 | 71392118 | 8 | CAPSCREW, BUTTON HEAD M12 X 25 |
| 20 | 71392578 | 8 | BOLT, M16 X 2 X 120MM |
| 21 | 70950227 | 18 | WASHER, FLAT 6MM |
| 22 | 390972X1 | 32 | *WASHER, FLAT 8MM |
| 23 | 70950230 | 28 | WASHER, FLAT 12MM |
| 24 | 70950232 | 16 | WASHER, FLAT 16MM |
| 25 | 1102797 | 12 | WASHER, LOCK 6MM |
| 26 | 1177981 | 32 | *WASHER, LOCK 8MM |
| 27 | 1102801 | 20 | WASHER, LOCK 12MM |
| 28 | 1102803 | 8 | WASHER, LOCK 16MM |
| 29 | 71392582 | 32 | *NUT, M8 X 1.25 |
| 30 | 71392584 | 20 | NUT, M12 X 1.75 |
| 31 | 71392586 | 8 | NUT, M16 X 2 |
| 32 | 70950995 | 12 | NUT, M6 X 1 |
| 1 | 71392428 | 1 | FRAME, ADAPTER |
| 2 | 71392439 | 1 | ADAPTER, SHIELD |
| 3 | 71392445 | 1 | ADAPTER, TOP SHIELD |
| 4 | 71392429 | 1 | BRACKET, MOUNTING LH, ADAPTER |
| 5 | 71392430 | 1 | BRACKET, MOUNTING RH, ADAPTER |
| 6 | 71393754 | 1 | *BAR, STRIPPER (LOWER LH) |
| 7 | 71392435 | 2 | BRACKET, STRIPPER BAR |
| 8 | 71392169 | 2 | BRACKET, STRIPPER BAR |
| 9 | 71393764 | 2 | *BAR, STRIPPER (UPPER RH) |
| 10 | 71392170 | 1 | EXTENSION, FACE SHIELD (RH) |
| 11 | 71393761 | 2 | *BAR, STRIPPER (UPPER EXT. RH) |
| 12 | 71392560 | 6 | SCREW, HEX SOCK, M8X20, BTN HD |
| 13 | 71392565 | 34 | *BOLT, CARRIAGE M8 X 1.25 X 25MM |
| 14 | 70950002 | 6 | BOLT, M6 X 1 X 20 HEX HD CI8.8 PL |
| 15 | 71392575 | 2 | BOLT, M12 X 1.75 X 25MM |
| 16 | 71392572 | 10 | BOLT, M12 X 1.75 X 35MM |
| 17 | 71392118 | 6 | *CAPSCREW, BUTTON HEAD M12 X 25 |
| 18 | 70950227 | 18 | WASHER, FLAT 6MM |
| 19 | 390972X1 | 34 | *WASHER, FLAT 8MM |
| 20 | 70950230 | 24 | *WASHER, FLAT 12MM |
| 21 | 70950232 | 16 | WASHER, FLAT 16MM |
| 22 | 71392578 | 8 | BOLT, M16 X 2 X 120MM |
| 23 | 1102797 | 12 | WASHER, LOCK 6MM |
| 24 | 1177981 | 34 | *WASHER, LOCK 8MM |
| 25 | 1102801 | 18 | *WASHER, LOCK 12MM |
| 26 | 70950995 | 12 | NUT, M6 X 1 |
| 27 | 71392582 | 34 | *NUT, M8 X 1.25 |
| 28 | 71392584 | 18 | *NUT, M12 |
| 29 | 1102803 | 8 | WASHER, LOCK 16MM |
| 30 | 71392586 | 8 | NUT, M16 X 2 |
| 31 | 71392160 | 2 | PLATE, FILLER |
| 32 | 71393756 | 1 | *SHIELD, FACE EXT. (LH) |
| 33 | 71393760 | 2 | *BRACKET, STRIPPER BAR |
| 1 | 71392519 | 1 | SHAFT ASY., DRIVE (COMPLETE) |
| 2 | 71392524 | 1 | SHIELD, TELESCOPING OUTER, 24″ |
| 3 | 71392525 | 1 | SHIELD, TELESCOPING INNER, 24″ |
| 4 | 71392528 | 1 | YOKE, PROFILE & SLEEVE, INBOARD |
| 5 | 71392527 | 1 | TUBE, TELESCOPING INNER, 24″ |
| 6 | 71392526 | 2 | CONE, SHIELD 5 RIB |
| 7 | 3734883M1 | 2 | COLLAR, REINFORCING |
| 8 | 700707550 | 1 | BEARING, SUPPORT |
| 9 | 8800567 | 2 | CHAIN, DRIVE SHAFT SHIELD |
| 10 | 1077994M1 | 2 | SCREW, SHIELD CONE |
| 11 | 71359170 | 1 | DECAL (ROTATING DRIVELINE) |
| 12 | 6580149 | 2 | U-JOINT, REPAIR KIT, (74.5 X 27) |
| 13 | 71359119 | 1 | DECAL (MISSING GUARD) |
| 14 | 71392520 | 1 | CLUTCH ASSEMBLY |
| 15 | 71385982 | 1 | YOKE, 1-3/8-Z21 |
| 16 | 71392597 | 1 | PIN, SPRING 10MM X 65MM |
| 17 | 71392123 | 1 | YOKE, SHAFT MOUNT, CLUTCH END |
| 18 | 71359168 | 2 | BEARING, SHIELD RING |
| 21 | 71400784 | 1 | DECAL, CE MARK |
| 1 | 71392298 | 1 | ARM, LOWER LH ASSEMBLY, HOLDDOWN |
| 2 | 71392296 | 1 | ARM, UPPER LH ASSEMBLY, HOLDDOWN |
| 3 | 71392299 | 1 | ARM, LOWER RH ASSEMBLY, HOLDDOWN |
| 4 | 71392297 | 1 | ARM, UPPER RH ASSEMBLY, HOLDDOWN |
| 5 | 71392292 | 2 | PLATE, REAR HOLDDOWN |
| 6 | 71392300 | 4 | HOLDDOWN, BUSHING SHORT |
| 7 | 71392293 | 2 | HOLDDOWN, FRONT PLATE |
| 8 | 71392301 | 4 | HOLDDOWN, BUSHING LONG |
| 9 | 71392305 | 1 | PLATE, SIDE LH HOLDDOWN |
| 10 | 71392304 | 1 | PLATE, SIDE RH ASSEMBLY, HOLDDOWN |
| 11 | 71392276 | 4 | BUSHING, HOLDDOWN BRACKET |
| 12 | 71392363 | 1 | TUBE, SPRING WIRE 12′ |
| 13 | 71400788 | 1 | TUBE, FIBERGLASS ROD W/DECALS 12′ |
| 19 | 70920328 | 4 | BOLT, 1/2″ X 1-1/2″ UNC |
| 20 | Y705046 | 4 | WASHER, LOCK 1/2″ |
| 21 | 71392544 | 4 | WASHER, FLAT 1/2″ |
| 22 | 71378928 | 2 | PIN, CLEVIS 1/2″ X 1-1/2″ |
| 23 | 71392492 | 2 | PIN, 1/8″ HITCH |
| 24 | 70923161 | 4 | BOLT, 1/2″ X 4-1/2″ UNC |
| 25 | Y705046 | 8 | WASHER, LOCK 1/2″ |
| 26 | 70926007 | 8 | NUT, 1/2″ UNC |
| 27 | 71392537 | 4 | BOLT, 1/2″ X 4″ UNC |
| 28 | 70915019 | 4 | NIPPLE, GREASE 1/4″ UNF 90 DEG. |
| 29 | 71392551 | 4 | NIPPLE, GREASE 1/4″ UNF STRAIGHT |
| 30 | 70918268 | 8 | WASHER, FLAT 5/8″ SAE |
| 31 | 71392492 | 4 | PIN, HITCH 1/8″ |
| 32 | 71392125 | 2 | DECAL, 1-1/8″ (SWATHMASTER) |
| 33 | 71379128 | 1 | DECAL (WARNING) |
| 34 | 71392515 | 2 | DECAL (WARNING/SAFETY LOCKS) |
| 2 | 71392455 | 2 | BEARING, 206-20S DDR |
| 3 | 71392336 | 1 | HOUSING, FRONT ROLLER SUPPORT |
| 4 | 70916965 | 4 | WASHER, LOCK 3/8″ |
| 5 | 70920415 | 4 | BOLT, 3/8″ X 1-1/4″ UNC |
| 6 | 71392334 | 1 | FRAME, FRONT 12′ |
| 7 | 71392341 | 1 | ROLLER, REAR FRONT FRAME 12′ |
| 8 | 71392343 | 1 | ROLLER, FRONT REAR FRAME 12′ |
| 9 | 71400790 | 1 | FRAME, REAR W/DECALS 12′ |
| 10 | 71392205 | 1 | ROLLER, REAR – REAR FRAME 12′ |
| 11 | 71392559 | 4 | SETSCREW, SQUARE HEAD 1/2″ X 3″ |
| 12 | 71392550 | 2 | NIPPLE, GREASE 1/8″ NPT STR |
| 13 | 71392224 | 2 | BRACKET, CARRIER |
| 14 | 71392544 | 4 | WASHER, FLAT 1/2″ |
| 15 | Y705046 | 12 | WASHER, LOCK 1/2″ |
| 16 | 70920328 | 12 | BOLT, 1/2″ X 1-1/2″ UNC |
| 17 | 71392268 | 2 | BOLT, WHEEL HEIGHT ADJUST |
| 18 | 70926007 | 2 | NUT, 1/2″ UNC |
| 19 | 71392270 | 2 | SPINDLE, CONESTOGA |
| 20 | 70918455 | 2 | PIN, COTTER 5/32″ X 1″ |
| 21 | 71392557 | 2 | SEAL, CONESTOGA |
| 22 | 70937219 | 4 | CONE, BEARING L44649 |
| 23 | 832190M1 | 4 | CUP, BEARING L44610 |
| 24 | 71392496 | 8 | STUD, CONESTOGA HUB 1/2″ UNF |
| 25 | 71392539 | 2 | NUT, CASTELLATED 1″ |
| 26 | 71392498 | 2 | CAP, DUST CONESTOGA |
| 27 | 71392495 | 2 | HUB, CONESTOGA (W/CUPS & STUDS) |
| 28 | 71392504 | 2 | TIRE ASY. (W/RIM) |
| 29 | 71392538 | 8 | NUT, WHEEL 1/2″ UNF |
| 30 | 71392267 | 2 | HUB & SPDL ASSEMBLY (INCL. ITEM #29) |
| 31 | 71392542 | 4 | WASHER, FLAT 3/8 |
| 32 | 71392545 | 8 | WASHER, 1/2 |
| 1 | 71392357 | 1 | GUARD, LEFT HAND FRONT ROLLER |
| 2 | 71392358 | 1 | GUARD, RIGHT HAND FRONT ROLLER |
| 3 | 71392347 | 2 | BRACKET, FRONT WINDGUARD |
| 4 | 71392229 | 4 | BRACKET, WINDGUARD (90) |
| 5 | 71392352 | 1 | WINDGUARD, LEFT HAND FRONT |
| 6 | 71392353 | 1 | WINDGUARD, RIGHT HAND FRONT |
| 7 | 71392350 | 1 | WINDGUARD, LEFT HAND REAR |
| 8 | 71392351 | 1 | WINDGUARD, RIGHT HAND REAR |
| 9 | 71392348 | 1 | BRACKET, CHAIN GUARD REAR |
| 10 | 71392230 | 2 | BRACKET, WINDGUARD 14′ OFFSET |
| 11 | 71392354 | 1 | GUARD, CHAIN (SWATHMASTER) |
| 12 | 71392126 | 1 | DECAL, (SWATHMASTER) |
| 14 | 71392530 | 6 | BOLT, ELEVATOR 1/4″ X 1/2″ |
| 23 | 71379128 | 2 | DECAL (WARNING GEN MOVING) |
| 24 | 72503345 | 2 | DECAL (WARNING PINCH POINT) |
| 25 | 71392127 | 2 | DECAL (DRAPER BELT TENSION) |
| 26 | 71392513 | 1 | DECAL (CHAIN ADJ WARNING) |
| 27 | 71392529 | 2 | BOLT, 1/4″ X 3/4″ |
| 28 | 70931209 | 2 | NUT, FLANGE 1/4″ UNC SERRATED |
| 29 | 71400792 | 1 | DECAL, WARNING (SHIELD OPEN) |
| 30 | 71393762 | 1 | FLAP, CHAIN GUARD |
| 31 | 71392516 | 2 | DECAL, READ MANUAL |
| 2 | 71392224 | 2 | BRACKET, CARRIER |
| 3 | 71392225 | 1 | BRACKET, LEFT HAND MOUNTING – 12FT |
| 4 | 71392226 | 1 | BRACKET, RIGHT HAND MOUNTING – 12FT |
| 5 | 71392227 | 1 | KIT, LEFT HAND MOUNTING BRACKET – 14FT |
| 6 | 71392233 | 1 | ANGLE, LEFT HAND MOUNTING – 14FT |
| 7 | 71392235 | 1 | BRACKET, LEFT HAND MOUNTING – 14FT |
| 8 | 71392129 | 4 | SHIM, MOUNTING – 14FT |
| 9 | 71392238 | 2 | UPRIGHT, CHANNEL |
| 10 | 71392260 | 3 | COVER, BEARING |
| 11 | 71392262 | 1 | COUPLING, HYD. MOTOR (ORDER NEWER TYPE) |
| 12 | 71392265 | 3 | KEY, 1/4″ X 1/4″ X 1-1/4″ |
| 13 | 71392322 | 1 | ARM, HYD. MOTOR TORQUE |
| 14 | 71392331 | 8 | ASSEMBLY, ROLLER HOUSING |
| 15 | 71400764 | 1 | BRACKET ASY. TOP, SPEED CONTROL |
| 16 | 71400765 | 1 | BRACKET ASY. LOWER, SPEED CONTROL |
| 17 | 71400766 | 1 | TARGET ASY., SPEED CONTROL |
| 18 | 71392355 | 1 | GUARD, REAR CHAIN |
| 19 | 71393762 | 1 | FLAP, CHAIN GUARD |
| 20 | 71392359 | 1 | SPROCKET, 50W16 (W/ HUB) |
| 21 | 71392360 | 1 | SPROCKET, 50X23 (W/ HUB) |
| 22 | 71392455 | 8 | BEARING, 206-20S DDR (W/COLLAR) |
| 23 | 71392456 | 8 | COLLAR, LOCKING EC206-20S |
| 24 | 71392468 | 1 | SPROCKET,IDLER 50A17X5/8″ID(W/BUSHINGS) |
| 25 | 71392128 | 1 | HUB, HH1 STEEL |
| 27 | 71393763 | 2 | BUSHING |
| 28 | 71400767 | 2 | CLAMP, BLACK NYLON 1/4 |
| 29 | 71400768 | 1 | GROMMET, 3/16 ID X 3/16 GRV X 5/16 HOLE |
| 30 | 71400769 | 1 | SENSOR, SPEED |
| 31 | 71400794 | 2 | BOLT, 1/4″ X 2-1/2″ UNC GR5 TAP PL |
| 32 | 71392529 | 2 | BOLT, ELEVATOR, 1/4″ X 3/4″ |
| 33 | 70921332 | 6 | BOLT, 5/16″ X 3/4″ UNC |
| 34 | 70921965 | 4 | BOLT, 3/8″ X 3/4″ UNC |
| 35 | 70921210 | 24 | BOLT, 3/8″ X 1″ UNC |
| 36 | 71392535 | 9 | STUD |
| 37 | 70920328 | 8 | BOLT, 1/2″ X 1-1/2″ UNC |
| 38 | 70921211 | 4 | BOLT, 1/2″ X 2-1/2″ UNC |
| 39 | 70929094 | 1 | BOLT, CARRIAGE 1/2″ X 2″ UNC |
| 40 | 70922645 | 1 | BOLT, 1/2″ X 2-1/4″ |
| 41 | 70931209 | 3 | NUT, FLANGE 1/4″ UNC |
| 42 | 71400770 | 2 | NUT, NYLOCK 1/4 UNC |
| 43 | 71400771 | 2 | NUT, LOCK 5/16 |
| 44 | 70916954 | 9 | NUT, LOCK 3/8″ |
| 45 | 70926007 | 13 | NUT, 1/2″ UNC |
| 46 | 70913744 | 1 | NUT, JAM 1/2″ |
| 47 | 70916964 | 2 | WASHER, LOCK 1/4″ |
| 48 | 70916965 | 37 | WASHER, LOCK 3/8″ |
| 49 | 71392542 | 9 | WASHER, FLAT 3/8″ |
| 50 | Y705046 | 13 | WASHER, LOCK 1/2″ |
| 51 | 71392544 | 8 | WASHER, FLAT 1/2″ |
| 52 | Y705624 | 2 | WASHER, FLAT 1/2″ SAE |
| 53 | 71400772 | 2 | RIVET, 3/16 X 1/4 X 3/8 STEEL |
| 54 | 71392550 | 2 | NIPPLE, GREASE STR 1/8″ NPT |
| 55 | 70923122 | 2 | SETSCREW, SQ HD 5/16 – 18 X 3/4″ |
| 56 | 70923085 | 2 | SETSCREW, SQ HD 5/16-18 X 1/2″ |
| 57 | 70923326 | 2 | SETSCREW, SQ HD, 3/8″ X 1″ |
| 58 | 70920469 | 1 | SCREW, SET, SQ HD 3/8″ X 3/4″ (REQ. ON |
| 59 | 71400795 | 2 | BOLT, 1/4″ X 1-1/2″ UNC GR5 TAP PL |
| 1 | 71392239 | 2 | BRACKET, LIFTER |
| 2 | 71392242 | 2 | HOLDER, STORAGE BRACE |
| 3 | 71392273 | 2 | SPRING, MAIN (W/PLUG) |
| 4 | 71392274 | 8 | STOPPER, RUBBER |
| 5 | 71392275 | 2 | BUSHING, LIFTER BRACKET |
| 6 | 71392302 | 2 | BUSHING, STORAGE BRACE |
| 7 | 71392324 | 2 | BOLT, LIFTER ADJUST |
| 8 | 71392325 | 2 | BOLT, SPRING 1/2 X 12 |
| 9 | 71392327 | 3 | WASHER, 1-1/4″ X 17/32″ X 1/4″ |
| 10 | 71392130 | 1 | BRACE, STORAGE (SWATHMASTER-RH) |
| 11 | 71392131 | 1 | BRACE, STORAGE (SWATHMASTER-LH) |
| 12 | 71392408 | 2 | BRACE, HEADER 12’RH/ 14’LH |
| 13 | 71392409 | 2 | BRACE, HEADER 12’LH/ 14’RH |
| 14 | 71392492 | 2 | PIN, HITCH 1/8″ |
| 15 | 71392132 | 2 | PIN, CLEVIS 1/2″ X 1-3/4″ |
| 16 | 71392116 | 2 | PIN, LOCK 3/8″ X 2-1/4″ |
| 17 | 71392502 | 2 | ABSORBER, SHOCK |
| 18 | 71392514 | 2 | DECAL (ATTENTION-STORAGE BRACE) |
| 19 | 70921024 | 3 | BOLT, 1/2″ X 2″ UNC |
| 20 | 70923320 | 3 | BOLT, 1/2″ X 3″ UNC |
| 21 | 70923161 | 1 | BOLT, 1/2″ X 4-1/2″ UNC |
| 22 | 70919089 | 2 | BOLT, 1/2″ X 1-3/4″ UNC |
| 23 | 70926007 | 11 | NUT, 1/2″ UNC |
| 24 | 70932665 | 2 | NUT, 5/8″ UNC |
| 25 | Y705046 | 15 | WASHER, LOCK 1/2″ |
| 26 | 71392544 | 2 | WASHER, FLAT 1/2″ |
| 27 | 71392545 | 4 | WASHER (HARDENED) 1/2″ |
| 28 | 70923544 | 2 | WASHER, 7/8 |
| 1 | 71400797 | 2 | BRACKET, LIFTER |
| 2 | 71392242 | 2 | HOLDER, STORAGE BRACE |
| 3 | 71400798 | 2 | SPRING, EXTENSION, C/W PLUGS |
| 4 | 71392274 | 8 | STOPPER, RUBBER |
| 5 | 71392275 | 2 | BUSHING, LIFTER BRACKET |
| 6 | 71392302 | 2 | BUSHING, STORAGE BRACE |
| 7 | 71392324 | 2 | BOLT, LIFTER ADJUST |
| 8 | 71400799 | 2 | BOLT, 5/8-11 X 12 GR5 PLTD |
| 9 | 71392327 | 3 | WASHER, 1-1/4″ X 17/32″ X 1/4″ |
| 10 | 71400800 | 1 | BRACE, STORAGE (SWATHMASTER-RH) |
| 11 | 71400801 | 1 | BRACE, STORAGE (SWATHMASTER-LH) |
| 12 | 71392408 | 2 | BRACE, HEADER 12’RH/ 14’LH |
| 13 | 71392409 | 2 | BRACE, HEADER 12’LH/ 14’RH |
| 14 | 71392492 | 2 | PIN, HITCH 1/8″ |
| 15 | 71392132 | 2 | PIN, CLEVIS 1/2″ X 1-3/4″ |
| 16 | 71392116 | 2 | PIN, LOCK 3/8″ X 2-1/4″ |
| 17 | 71392502 | 2 | ABSORBER, SHOCK |
| 18 | 71400802 | 4 | DECAL, NOTIFICATION (LARGE) |
| 19 | 70921024 | 3 | BOLT, 1/2″ X 2″ UNC |
| 20 | 70923320 | 3 | BOLT, 1/2″ X 3″ UNC |
| 21 | 70923161 | 1 | BOLT, 1/2″ X 4-1/2″ UNC |
| 22 | 70919089 | 2 | BOLT, 1/2″ X 1-3/4″ UNC |
| 23 | 70926007 | 11 | NUT, 1/2″ UNC |
| 24 | 70932665 | 2 | NUT, 5/8″ UNC |
| 25 | Y705046 | 15 | WASHER, LOCK 1/2″ |
| 26 | 71392544 | 2 | WASHER, FLAT 1/2″ |
| 27 | 71400804 | 4 | WASHER, 5/8″ HRD PL |
| 28 | 71400774 | 2 | WASHER, 7/8 |
| 29 | 71400805 | 2 | RING, SPLIT, 1-1/4″ |
| 30 | Y705624 | 4 | WASHER, 1/2 SAE FLAT |
| 31 | 71400806 | 2 | PIN, 1/2 C 2-1/4, CLEAVIS PLTD |
| 32 | 71400807 | 2 | WASHER, 5/8 USS PL |
| 1 | 71392133 | 2 | HOSE, HYD., FLEX-POINT |
| 2 | 71392472 | 2 | ELBOW, #6 MORB X #6 MJIC |
| 3 | 71392474 | 1 | *CYLINDER, HYD. 1-1/2″ BORE X 10″ STROKE |
| 4 | 71392303 | 2 | BRACE, CYLINDER (FOR SHIPPING ONLY) |
| 5 | 70921973 | 2 | BOLT, 3/8″ X 2-3/4″ UNC |
| 6 | 71392542 | 6 | WASHER, FLAT 3/8″ |
| 7 | 71392543 | 2 | WASHER, NEOPRENE 3/8″ X 1.1 X .062 |
| 8 | 71392446 | 2 | LOCK, SAFETY |
| 9 | 71392134 | 2 | NUT, UNITORQUE 3/8″ |
| 11 | 71392547 | 2 | SCREW, SHEET METAL #14 – 3/4″ |
| 13 | 71392136 | 5 | CLAMP, DRILLED, 3/8″ PIPE |
| 16 | 71392138 | 1 | LINE, STEEL, HYD. LIFT, 12 FT. |
| 17 | 71400809 | 8 | WASHER, .625 X .781 X .188 |
| 19 | 70918268 | 8 | WASHER, FLAT 5/8″ SAE |
| 20 | 71392492 | 4 | PIN, HITCH 1/8 |
| 1 | 71392482 | 1 | KIT, SEAL FOR RSY-15PMF-10 (R3604525) |
| 3 | 71392486 | 1 | NUT, LOCK 5/8″ UNF GR8, FOR RSY-15PMF-10 |
| 4 | 71392480 | 1 | PISTON, FOR RSY-15PMF-10 |
| 5 | 71392478 | 1 | SHAFT, FOR RSY-15PMF-10 |
| 6 | 71392484 | 1 | GLAND, FOR RSY-15PMF-10 |
| 7 | 71392272 | 1 | ORIFICE, #6 ORB X 0.063 |
| 9 | 71392141 | 1 | BLEED PLUG, SLAVE |
| 10 | 71392142 | 1 | SHAFT, SLAVE |
| 11 | 71392143 | 1 | SEAL KIT, SLAVE |
| 12 | 71392144 | 1 | GLAND, SLAVE |
| 1 | 71392298 | 1 | HOLDDOWN, LOWER ARM, LH ASSEMBLY |
| 2 | 71400781 | 1 | HOLDDOWN, UPPER ARM, LH ASSEMBLY |
| 3 | 71392299 | 1 | HOLDDOWN, LOWER ARM, RH ASSEMBLY |
| 4 | 71400782 | 1 | HOLDDOWN, UPPER ARM, RH ASSEMBLY |
| 5 | 71392292 | 2 | HOLDDOWN, REAR PLATE |
| 6 | 71392300 | 4 | HOLDDOWN, BUSHING SHORT |
| 7 | 71392293 | 2 | HOLDDOWN, FRONT PLATE |
| 8 | 71392301 | 4 | HOLDDOWN, BUSHING LONG |
| 9 | 71392305 | 1 | HOLDDOWN, SIDE PLATE, LH |
| 10 | 71392304 | 1 | HOLDDOWN, SIDE PLATE, RH ASSEMBLY |
| 11 | 71392276 | 4 | BUSHING, HOLDDOWN BRKT |
| 12 | 71392290 | 1 | TUBE, SPRING WIRE 12M |
| 13 | 71400814 | 1 | TUBE, FIBERGLASS ROD, 12M W/DECALS |
| 19 | 70920328 | 4 | BOLT, 1/2″ X 1-1/2″ UNC |
| 20 | Y705046 | 4 | WASHER, LOCK 1/2″ |
| 21 | 71392544 | 4 | WASHER, FLAT 1/2″ |
| 22 | 71378928 | 2 | PIN, CLEVIS 1/2″ X 1-1/2″ |
| 23 | 71392492 | 2 | PIN, 1/8 HITCH |
| 24 | 70923161 | 4 | BOLT, UNC 1/2″ X 4-1/2″ |
| 25 | Y705046 | 8 | WASHER, LOCK 1/2″ |
| 26 | 70926007 | 8 | NUT, 1/2″ UNC |
| 27 | 71392537 | 4 | BOLT, 1/2″ X 4″ UNC |
| 28 | 70915019 | 4 | NIPPLE, GREASE 1/4″ UNF 90 |
| 29 | 71392551 | 4 | NIPPLE, GREASE 1/4″ UNF STR |
| 30 | 70918268 | 8 | WASHER, FLAT 5/8″ SAE |
| 31 | 71392492 | 4 | PIN, 1/8 HITCH |
| 32 | 71392145 | 2 | DECAL, 1-1/8 (RAKE-UP) |
| 33 | 71379128 | 1 | DECAL (WARNING) |
| 34 | 71392515 | 2 | DECAL (WARNING-SAFETY LOCKS) |
| 1 | 71400816 | 1 | FRAME, MAIN 12′ W/DECALS |
| 4 | 71392205 | 1 | ROLLER, REAR 12′ |
| 5 | 71392550 | 2 | NIPPLE, GREASE 1/8″ NPT STR |
| 6 | 71392224 | 2 | BRACKET, CARRIER |
| 7 | 70916965 | 17 | WASHER, LOCK 3/8″ |
| 8 | 70921210 | 12 | BOLT, 3/8″ X 1″ UNC |
| 9 | 70920415 | 4 | BOLT, 3/8″ X 1-1/4″ UNC |
| 10 | 71392559 | 2 | SCREW, SET, SQ HD 1/2 X 3″ |
| 13 | 71392455 | 4 | BEARING, 206-20S DDR (W/COLLAR) |
| 14 | 71392456 | 4 | COLLAR, LOCKING EC206-20S |
| 15 | 71392331 | 4 | HOUSING, ROLLER ASSEMBLY |
| 16 | 71392265 | 2 | KEY, 1/4″ X 1/4″ X 1-1/4″ |
| 17 | 71392203 | 1 | ROLLER, FRONT 12′ |
| 20 | 70920328 | 4 | BOLT, 1/2″ X 1-1/2″ |
| 21 | Y705046 | 6 | WASHER, LOCK 1/2″ |
| 22 | 71392545 | 4 | WASHER, FLAT 1/2″ |
| 23 | 70926007 | 2 | NUT, 1/2″ UNC |
| 24 | 71392240 | 1 | ARM, BELT TIGHTENER |
| 25 | 71392277 | 1 | BUSHING, BELT TIGHTENER |
| 26 | 71392466 | 1 | TIGHTENER, SPRING (MIRROR) |
| 27 | 70923320 | 1 | BOLT, 1/2″ X 3″ UNC |
| 28 | 70921211 | 1 | BOLT, 1/2″ X 2-1/2″ UNC |
| 29 | 71392244 | 1 | PULLEY, TIGHTENER |
| 30 | 71392544 | 2 | WASHER, FLAT, 1/2 |
| 31 | 70921972 | 1 | BOLT, 3/8″ X 2-1/2″ UNC |
| 32 | 71392542 | 1 | WASHER, FLAT, 3/8″ |
| 33 | 70923518 | 1 | NUT, 3/8″ UNC |
| 34 | 70920469 | 2 | SCREW, SET, SQ HD 3/8″ X 3/4″ |
| 35 | 71392245 | 1 | PULLEY, B-10″ |
| 36 | 71392454 | 1 | BELT, B92 |
| 37 | 71392216 | 1 | BOX, COMPLETE GEAR (W/OUT COVER) |
| 38 | 71392211 | 1 | PLATE, SCROLL (MIRROR) |
| 39 | 71392333 | 1 | ROTOR (REFERENCE DRIVE END ROTOR ASY.) |
| 40 | 71392328 | 1 | WASHER, 2″ X 17/32″ X 3/16″ |
| 41 | Y705046 | 1 | WASHER, LOCK 1/2″ |
| 42 | 70927475 | 1 | BOLT, DRILLED 1/2″ X 1-1/2″ UNC |
| 1 | 71392453 | 1 | DRAPER BELT, BOLT TOGETHER 135-1/4 |
| 2 | 71392208 | 1 | REAR ROLLER |
| 3 | 71392207 | 1 | FRONT ROLLER |
| 4 | 71392283 | 1 | BELT EDGE PROTECTOR (3-HOLE) |
| 5 | 71392284 | 1 | BELT EDGE PROTECTOR (4-HOLE) |
| 6 | 71392246 | 4 | GUIDE PULLEY (3-1/2 O.D. X 1-1/4 I.D.) |
| 7 | 71392265 | 4 | KEY, 1/4″ X 1/4″ X 1-1/4″ |
| 8 | 71392282 | 6 | PROTECTOR, BELT EDGE |
| 9 | 71392530 | 43 | BOLT, ELEVATOR 1/4″ X 1/2″ UNC |
| 10 | 70931209 | 43 | NUT, SERRATED FLANGE 1/4″ |
| 2 | 71392555 | 6 | BUSHING,#8 MACHINERY,1/4″THK(1/GEARBOX) |
| 3 | 71392266 | 6 | KEY, 1/4″ X 1/4″ X 13/16″ |
| 4 | 71392222 | 6 | GEARBOX, SMALL (COMPLETE) |
| 5 | 71392552 | 12 | PLUG, PIPE 1/8″ SKT (2/GEARBOX) |
| 6 | 71392265 | 6 | KEY, 1/4″ X 1/4″ X 1-1/4″ |
| 7 | 70921969 | 12 | BOLT, 3/8″ X 1-1/2″ UNC |
| 8 | 70916965 | 6 | WASHER, LOCK 3/8″ |
| 9 | 70923518 | 12 | NUT, 3/8″ UNC |
| 10 | 70920439 | 12 | NUT, JAM 7/8″ UNF |
| 11 | 71392213 | 6 | ARM, FINGER BAR DRIVE (MIRROR) |
| 12 | 71392457 | 12 | BEARING, 6205 LLC |
| 13 | 70922471 | 6 | NUT, 7/16″ UNF |
| 14 | 70918199 | 6 | WASHER, LOCK 7/16″ |
| 15 | 71392214 | 6 | ARM, FOLLOWER (MIRROR) |
| 16 | 70918267 | 6 | WASHER, FLAT 7/16″ SAE |
| 17 | 71392458 | 12 | BEARING, 6202-16 DDU |
| 18 | 71392261 | 6 | BOLT, SHOULDER |
| 19 | 71392329 | 6 | BOLT ASY., SHOULDER |
| 1 | 71392330 | 1 | IDLER ROTOR ASSEMBLY |
| 2 | 71392212 | 6 | ELBOW |
| 3 | 71392269 | 6 | CAP, BEARING |
| 4 | 71392457 | 24 | BEARING, 6205 LLC |
| 5 | 71392326 | 12 | WASHER, FLAT 1-1/4″ X 3/8″ X 11GA |
| 6 | 70916965 | 6 | WASHER, LOCK, 3/8″ |
| 7 | 70921965 | 12 | BOLT, 3/8″ X 3/4″ UNC |
| 10 | 71392328 | 1 | WASHER, 2″ X 17/32″ X 3/16″ |
| 11 | Y705046 | 1 | WASHER, LOCK 1/2″ |
| 12 | 70920328 | 1 | BOLT, 1/2″ X 1-1/2″ |
| 14 | 71400818 | 48 | BOLT, 5/16″ X 1″ UNC GR8 |
| 15 | 70917356 | 48 | WASHER, LOCK 5/16″ |
| 16 | 71392541 | 96 | WASHER, FENDER 3/8″ X 1-1/2 X 10GA |
| 17 | 71392285 | 6 | BELT, FINGER BAR (4″ X 12′) |
| 21 | 71392459 | 2 | BEARING, 6007 DDU |
| 22 | 71392263 | 6 | BAR, FINGER 12′ |
| 25 | 70921958 | 3 | BOLT, 1/4″ X 1/2″ UNC |
| 26 | 71392590 | 1 | PLATE, IDLER ROTOR SEAL |
| 27 | 71392278 | 1 | HOUSING, IDLER ROTOR BRG |
| 28 | 70920415 | 4 | BOLT, 3/8″ X 1-1/4″ UNC |
| 29 | 70916965 | 4 | WASHER, LOCK, 3/8″ |
| 30 | 70923518 | 4 | NUT, 3/8″ UNC |
| 31 | 70931209 | 3 | NUT, FLANGE 1/4″ UNC |
| 32 | 71392593 | 6 | ASY., ARM, FINGER BAR IDLER (MIRROR) |
| 2 | 71392553 | 1 | BUSHING, #16 (1-3/8″ HOLE, 18GA) |
| 3 | 71392459 | 2 | BEARING, 6007 DDU |
| 4 | 71392220 | 1 | SPACER, OUTPUT |
| 5 | 22289X | 2 | RING, SNAP 244 INTERNAL |
| 6 | 71392219 | 1 | GEAR, 11 TOOTH PINION |
| 7 | 71392265 | 1 | KEY, 1/4″ X 1/4″ X 1-1/4″ |
| 8 | 71392460 | 2 | BEARING, 6206 DDU |
| 9 | 71392221 | 1 | SPACER, LONG INPUT |
| 10 | 70927931 | 1 | RING, SNAP 118 EXTERNAL |
| 11 | 61770 | 1 | KEY, 3/8″ X 3/8″ X 1-1/2″ |
| 12 | 71392218 | 1 | GEAR, 36 TOOTH CROWN |
| 13 | 71392223 | 1 | COVER, SQUARE GEARBOX |
| 14 | 71392552 | 1 | PLUG, PIPE 1/8″ SKT |
| 15 | 70923504 | 4 | BOLT, 3/8″ X 4-1/2″ UNC |
| 16 | 70916965 | 4 | WASHER, LOCK 3/8″ |
| 17 | 71392332 | 1 | GEAR, PINION ASSEMBLY |
| 18 | 71392542 | 4 | WASHER, FLAT 3/8″ |
| 1 | 71392254 | 1 | GUARD, IDLER END FRONT ROLLER (MIRROR) |
| 2 | 71392255 | 1 | GUARD, DRIVE END FRONT ROLLER (MIRROR) |
| 3 | 70921965 | 4 | BOLT, 3/8″ X 3/4″ UNC |
| 4 | 70916965 | 4 | WASHER, LOCK 3/8″ |
| 5 | 71392146 | 1 | GUARD, SCROLL PLATE (MIRROR) |
| 6 | 71392279 | 1 | PLUG, 1-1/4″ SCROLL PLATE |
| 7 | 70921958 | 5 | BOLT, 1/4″ X 1/2″ UNC |
| 8 | 70916964 | 5 | WASHER, LOCK 1/4″ |
| 9 | 70920380 | 5 | WASHER, FLAT 1/4″ |
| 10 | 71392250 | 1 | GUARD, BELT W/DECAL (MIRROR) |
| 11 | 71392237 | 1 | BRACKET, BELT GUARD (MIRROR) |
| 12 | 71392147 | 1 | DECAL (RAKE-UP) |
| 13 | 71392532 | 3 | BOLT, TRUSS 5/16″ X 3/4″ UNC |
| 14 | 70917356 | 4 | WASHER, LOCK 5/16″ |
| 15 | 70917372 | 4 | NUT, 5/16″ UNC |
| 16 | 71392148 | 1 | GUARD, DRIVE END WIND (MIRROR) |
| 17 | 71392229 | 2 | *BRACKET, WINDGUARD (90) 12M |
| 18 | 71392230 | 2 | **BRACKET, WINDGUARD 14FT. OFFSET 14M |
| 19 | 71392531 | 4 | BOLT, TRUSS 5/16″ X 1″ UNC |
| 20 | 70917356 | 3 | WASHER, LOCK 5/16″ |
| 21 | 70917372 | 3 | NUT, 5/16″ UNC |
| 22 | 70921210 | 2 | BOLT, 3/8″ X 1″ UNC |
| 23 | 70916965 | 2 | WASHER, LOCK 3/8″ |
| 24 | 71392248 | 1 | GUARD, IDLER END WIND |
| 25 | 71392531 | 2 | BOLT, TRUSS 5/16″ X 1″ UNC |
| 26 | 70917356 | 2 | WASHER, LOCK 5/16″ |
| 27 | 70917372 | 2 | NUT, 5/16″ UNC |
| 28 | 71392149 | 1 | GUARD, IDLER ROTOR W/DECAL (MIRROR) |
| 29 | 71392532 | 3 | BOLT, TRUSS 5/16″ X 3/4″ UNC |
| 30 | 70917356 | 3 | WASHER, LOCK 5/16″ |
| 31 | 70917372 | 3 | NUT, 5/16″ UNC |
| 32 | 71392532 | 2 | BOLT, TRUSS 5/16″ X 3/4″ UNC |
| 33 | 70917356 | 2 | WASHER, LOCK 5/16″ |
| 34 | 70917372 | 2 | NUT, 5/16″ UNC |
| 35 | 71392259 | 1 | ROTOR, GUARD IDLER |
| 36 | 70921333 | 2 | BOLT, 5/16″ X 1″ UNC |
| 37 | 70917356 | 2 | WASHER, LOCK 5/16″ |
| 38 | 70917372 | 2 | NUT, 5/16″ UNC |
| 39 | 71379128 | 2 | DECAL (WARNING-MOVING) |
| 40 | 72503345 | 2 | DECAL (WARNING-PINCH POINT) |
| 41 | 70917377 | 2 | WASHER, FLAT 5/16″ |
| 42 | 71392151 | 2 | DECAL (DRAPER BELT TENSION) |
| 1 | 71392133 | 2 | HOSE, HYD., FLEX-POINT |
| 2 | 71392472 | 2 | ELBOW, #6 MORB X #6 MJIC |
| 3 | 71392474 | 1 | *CYLINDER, HYD. 1-1/2″ BORE X 10″ STROKE |
| 4 | 71392303 | 2 | **BRACE, CYLINDER |
| 5 | 70921973 | 2 | BOLT, 3/8″ X 2-3/4″ UNC |
| 6 | 71392542 | 6 | WASHER, FLAT 3/8″ |
| 7 | 71392543 | 2 | WASHER, NEOPRENE 3/8″ X 1.1 X .062 |
| 8 | 71392446 | 2 | LOCK, SAFETY |
| 9 | 71392134 | 2 | NUT, UNITORQUE 3/8″ |
| 11 | 71392547 | 2 | SCREW, SHEET METAL #14 – 3/4″ |
| 13 | 71392136 | 5 | CLAMP, DRILLED, 3/8″ PIPE |
| 16 | 71392138 | 1 | LINE, STEEL, HYD. LIFT, 12 FT. |
| 21 | 71400809 | 8 | WASHER, .625 X .781 X .188 |
| 1 | 71392482 | 1 | KIT, SEAL FOR RSY-15PMF-10 (R3604525) |
| 3 | 71392486 | 1 | NUT, LOCK 5/8″ UNF GR8, FOR RSY-15PMF-10 |
| 4 | 71392480 | 1 | PISTON, FOR RSY-15PMF-10 |
| 5 | 71392478 | 1 | SHAFT, FOR RSY-15PMF-10 |
| 6 | 71392484 | 1 | GLAND, FOR RSY-15PMF-10 |
| 7 | 71392272 | 1 | ORIFICE, #6 ORB X 0.063 |
| 9 | 71392141 | 1 | BLEED PLUG, SLAVE |
| 10 | 71392142 | 1 | SHAFT, SLAVE |
| 11 | 71392143 | 1 | SEAL KIT, SLAVE |
| 12 | 71392144 | 1 | GLAND, SLAVE |
| 1 | 71392408 | 1 | BRACE, HEADER 12 FT.-RH/14 FT.-LH |
| 2 | 71392324 | 2 | BOLT, LIFTER ADJUST |
| 3 | 71392274 | 8 | STOPPER, RUBBER |
| 4 | 71392325 | 2 | BOLT, SPRING |
| 5 | 71392238 | 2 | UPRIGHT, CHANNEL |
| 6 | 70923320 | 2 | BOLT, UNC 1/2″ X 3″ |
| 7 | 70932665 | 2 | NUT, UNC 5/8″ |
| 8 | 71392327 | 2 | WASHER, 1-1/4″ X 17/32″ X 1/4″ |
| 9 | 71392502 | 2 | ABSORBER, SHOCK |
| 10 | 71392239 | 2 | BRACKET, LIFTER |
| 11 | 71392275 | 2 | BUSHING, LIFTER BRACKET |
| 12 | 70926007 | 2 | NUT, 1/2″ UNC |
| 13 | Y705046 | 2 | WASHER, LOCK 1/2″ |
| 14 | 71392273 | 2 | SPRING, MAIN W/PLUG 12′ & 14′ UNITS |
| 15 | 70926007 | 2 | NUT, UNC 1/2″ |
| 16 | 71392225 | 1 | BRACKET, LH MOUNTING – 12 FT. |
| 17 | 70920328 | 8 | BOLT, UNC 1/2″ X 1-1/2″ |
| 18 | Y705046 | 12 | WASHER, LOCK 1/2″ |
| 19 | 70926007 | 12 | NUT, UNC 1/2″ |
| 20 | 70921211 | 4 | BOLT, UNC 1/2″ X 2-1/2″ |
| 21 | 71392235 | 1 | BRACKET, LH MOUNTING – 14FT |
| 22 | 71392233 | 1 | ANGLE, LH MOUNTING – 14FT |
| 23 | 71392232 | 4 | SHIM, MOUNTING |
| 24 | 71392544 | 4 | WASHER, FLAT 1/2″ |
| 25 | Y705046 | 4 | WASHER, LOCK 1/2″ |
| 26 | 70926007 | 4 | NUT, UNC 1/2″ |
| 27 | 71392227 | 1 | BRACKET, LH MOUNTING ASY. – 14FT |
| 28 | 71392242 | 2 | HOLDER, STORAGE BRACE |
| 29 | 70921024 | 2 | BOLT, UNC 1/2″ X 2″ |
| 30 | Y705046 | 2 | WASHER, LOCK 1/2″ |
| 31 | 70926007 | 2 | NUT, UNC 1/2″ |
| 32 | 71392152 | 1 | BRACE, STORAGE-RH |
| 33 | 70919089 | 2 | BOLT, UNC 1/2″ X 1-3/4″ |
| 34 | 71392544 | 4 | WASHER, FLAT 1/2″ |
| 35 | 71392302 | 2 | BUSHING, STORAGE BRACE |
| 36 | 71392116 | 2 | PIN, LOCK 3/8″X 2-1/4″ |
| 37 | Y705046 | 2 | WASHER, LOCK 1/2″ |
| 38 | 70926007 | 2 | NUT, UNC 1/2″ |
| 39 | 71392132 | 2 | PIN, CLEVIS 1/2″ X 1-3/4″ |
| 40 | 71392492 | 2 | PIN, HITCH 1/8″ |
| 41 | 70923161 | 2 | BOLT, 1/2″ X 4-1/2 UNC |
| 42 | Y705046 | 2 | WASHER, LOCK 1/2″ |
| 43 | 70926007 | 2 | NUT, 1/2″ UNC |
| 44 | 71392268 | 2 | BOLT, HEIGHT ADJUST |
| 45 | 70926007 | 2 | NUT, UNC 1/2″ |
| 46 | 70920328 | 4 | BOLT, 1/2″ X 1-1/2″ |
| 47 | Y705046 | 4 | WASHER, LOCK 1/2″ |
| 48 | 71392544 | 4 | WASHER, FLAT 1/2″ |
| 49 | 71392270 | 2 | SPINDLE, CONESTOGA |
| 50 | 70918455 | 2 | PIN, COTTER 5/32″ X 1″ |
| 51 | 71392557 | 2 | SEAL, CONESTOGA |
| 52 | 70937219 | 4 | CONE, BEARING L44649 |
| 53 | 832190M1 | 4 | CUP, BEARING L44610 |
| 54 | 71392496 | 8 | STUD, 1/2″ UNF CONESTOGA HUB |
| 55 | 71392495 | 2 | HUB, CONESTOGA (W/CUPS & STUDS) |
| 56 | 71392539 | 2 | NUT, 1″ CASTELLATED |
| 57 | 71392498 | 2 | CAP, CONESTOGA DUST |
| 58 | 71392267 | 2 | HUB & SPINDLE ASY. (INCL. ITEM # 60) |
| 59 | 71392504 | 2 | TIRE (W/RIM) |
| 60 | 71392538 | 8 | NUT, 1/2″ UNF WHEEL |
| 61 | 71392545 | 2 | WASHER, HARDENED 1/2″ |
| 62 | 71392514 | 2 | DECAL (ATTENTION STORAGE BRACE) |
| 63 | 71400774 | 2 | WASHER, FLAT 7/8″ |
| 1 | 71392408 | 1 | BRACE, HEADER 12 FT.-RH/14 FT.-LH |
| 2 | 71392324 | 2 | BOLT, LIFTER ADJUST |
| 3 | 71392274 | 8 | STOPPER, RUBBER |
| 4 | 71400799 | 2 | BOLT, 5/8-11 X 12 GR5 PLTD |
| 5 | 71400793 | 2 | UPRIGHT, CHANNEL W/ 3/4″ BOLT HOLES |
| 6 | 70923320 | 2 | BOLT, UNC 1/2″ X 3″ |
| 7 | 70932665 | 2 | NUT, UNC 5/8″ |
| 8 | 71392327 | 2 | WASHER, 1-1/4″ X 17/32″ X 1/4″ |
| 9 | 71392502 | 2 | ABSORBER, SHOCK |
| 10 | 71400797 | 2 | BRACKET, LIFTER |
| 11 | 71392275 | 2 | BUSHING, LIFTER BRACKET |
| 12 | 70926007 | 2 | NUT, 1/2″ UNC |
| 13 | Y705046 | 2 | WASHER, LOCK 1/2″ |
| 14 | 71400798 | 2 | SPRING, EXTENSION, C/W PLUGS |
| 15 | 70926007 | 2 | NUT, UNC 1/2″ |
| 16 | 71392225 | 1 | BRACKET, LH MOUNTING – 12 FT. |
| 17 | 70920328 | 8 | BOLT, UNC 1/2″ X 1-1/2″ |
| 18 | Y705046 | 12 | WASHER, LOCK 1/2″ |
| 19 | 70926007 | 12 | NUT, UNC 1/2″ |
| 20 | 70921211 | 4 | BOLT, UNC 1/2″ X 2-1/2″ |
| 21 | 71392235 | 1 | BRACKET, LH MOUNTING – 14FT |
| 22 | 71392233 | 1 | ANGLE, LH MOUNTING – 14FT |
| 23 | 71392232 | 4 | SHIM, MOUNTING |
| 24 | 71392544 | 4 | WASHER, FLAT 1/2″ |
| 25 | Y705046 | 4 | WASHER, LOCK 1/2″ |
| 26 | 70926007 | 4 | NUT, UNC 1/2″ |
| 27 | 71392227 | 1 | BRACKET, LH MOUNTING ASY. – 14FT |
| 28 | 71392242 | 2 | HOLDER, STORAGE BRACE |
| 29 | 70921024 | 2 | BOLT, UNC 1/2″ X 2″ |
| 30 | Y705046 | 2 | WASHER, LOCK 1/2″ |
| 31 | 70926007 | 2 | NUT, UNC 1/2″ |
| 32 | 71400820 | 1 | BRACE, STORAGE-RH |
| 33 | 70919089 | 2 | BOLT, UNC 1/2″ X 1-3/4″ |
| 34 | 71392544 | 4 | WASHER, FLAT 1/2″ |
| 35 | 71392302 | 2 | BUSHING, STORAGE BRACE |
| 36 | 71392116 | 2 | PIN, LOCK 3/8″X 2-1/4″ |
| 37 | Y705046 | 2 | WASHER, LOCK 1/2″ |
| 38 | 70926007 | 2 | NUT, UNC 1/2″ |
| 39 | 71392132 | 2 | PIN, CLEVIS 1/2″ X 1-3/4″ |
| 40 | 71392492 | 2 | PIN, HITCH 1/8″ |
| 41 | 70923161 | 2 | BOLT, 1/2″ X 4-1/2 UNC |
| 42 | Y705046 | 2 | WASHER, LOCK 1/2″ |
| 43 | 70926007 | 2 | NUT, 1/2″ UNC |
| 44 | 71392268 | 2 | BOLT, HEIGHT ADJUST |
| 45 | 70926007 | 2 | NUT, UNC 1/2″ |
| 46 | 70920328 | 4 | BOLT, 1/2″ X 1-1/2″ |
| 47 | Y705046 | 4 | WASHER, LOCK 1/2″ |
| 48 | 71392544 | 4 | WASHER, FLAT 1/2″ |
| 49 | 71392270 | 2 | SPINDLE, CONESTOGA |
| 50 | 70918455 | 2 | PIN, COTTER 5/32″ X 1″ |
| 51 | 71392557 | 2 | SEAL, CONESTOGA |
| 52 | 70937219 | 4 | CONE, BEARING L44649 |
| 53 | 832190M1 | 4 | CUP, BEARING L44610 |
| 54 | 71392496 | 8 | STUD, 1/2″ UNF CONESTOGA HUB |
| 55 | 71392495 | 2 | HUB, CONESTOGA (W/CUPS & STUDS) |
| 56 | 71392539 | 2 | NUT, 1″ CASTELLATED |
| 57 | 71392498 | 2 | CAP, CONESTOGA DUST |
| 58 | 71392267 | 2 | HUB & SPINDLE ASY. (INCL. ITEM # 60) |
| 59 | 71392504 | 2 | TIRE (W/RIM) |
| 60 | 71392538 | 8 | NUT, 1/2″ UNF WHEEL |
| 61 | 71400804 | 2 | WASHER, 5/8″ HRD PL |
| 62 | 71400803 | 2 | DECAL (ATTENTION STORAGE BRACE) |
| 63 | 71400774 | 2 | WASHER, FLAT 7/8″ |
| 64 | 71400806 | 2 | PIN, 1/2 X 2-1/4 CLEVIS |
| 65 | Y705624 | 4 | WASHER, 1/2 SAE PLATED |
| 66 | 71400822 | 2 | RING, SPLIT, 1-1/4 |
| 67 | 71400807 | 2 | WASHER, 5/8 USS PL |
| 1 | 71392265 | 1 | KEY, 1/4 X 1/4 X 1-1/4 |
| 2 | 71392258 | 1 | GUARD, DRIVE (MIRROR) |
| 3 | 71392251 | 1 | GUARD, REAR BELT (STANDARD) |
| 4 | 71392252 | 1 | FLAP, GUARD (REAR BELT) |
| 5 | 70920380 | 2 | WASHER, FLAT, 1/4 |
| 6 | 70921960 | 2 | CAPSCREW, HEX, 1/4-20 X 1.0 |
| 7 | 70916964 | 2 | WASHER, LOCK, 1/4 |
| 8 | 70916622 | 2 | NUT, HEX, 1/4-20 |
| 9 | 71392253 | 2 | COVER, DRIVE GUARD END |
| 10 | 70921960 | 2 | CAPSCREW, HEX, 1/4-20 X 1.0 |
| 11 | 70920380 | 2 | WASHER, FLAT, 1/4 |
| 12 | 70916964 | 2 | WASHER, LOCK, 1/4 |
| 13 | 70916622 | 2 | NUT, HEX, 1/4-20 |
| 14 | 71400775 | 1 | TARGET, HUB 4 LOBE |
| 15 | 71392154 | 1 | BUSHING, SPLIT-TAPER |
| 16 | 71392546 | 1 | KEY, 3/16 X 1/4 X1-1/4 |
| 17 | 70916964 | 2 | WASHER, LOCK, 1/4 |
| 18 | 70923341 | 2 | CAPSCREW, 1/4-20 X 3/4 |
| 19 | 71392262 | 1 | COUPLING, HYD. MOTOR (ORDER NEWER TYPE) |
| 20 | 70916964 | 2 | WASHER, LOCK, 1/4 |
| 21 | 71400794 | 2 | BOLT, 1/4″ UNC X 2-1/2 GR5 TAP PL |
| 22 | 70923326 | 2 | SCREW, SET, SQ. HEAD, 3/8 X 1.0 |
| 23 | 71392243 | 1 | PULLEY, DRAPER (MB52L) |
| 26 | 71392322 | 1 | ARM, HYD. MOTOR TORQUE |
| 27 | 70921965 | 4 | BOLT, 3/8″ X 3/4″ UNC |
| 28 | 70916965 | 4 | WASHER, LOCK 3/8″ |
| 29 | 71400776 | 1 | MOUNT, SENSOR |
| 30 | 71400769 | 1 | SENSOR, SPEED |
| 31 | 71400767 | 2 | CLAMP, BLACK NYLON |
| 32 | 71400772 | 2 | RIVET, 3/16 X 1/4 X 3/8 STEEL |
| 33 | 71400768 | 1 | GROMMET 3/16 ID X 3/16 GRV X 5/16 HOLE |
| 34 | 71400777 | 2 | BOLT, TRUSS 1/4 X 3/4 |
| 35 | 71400770 | 2 | NUT, 1/4 NYLOCK |
| 36 | 71400795 | 2 | BOLT, 1/4 UNC X 1-1/2 GR5 TAP PL |
| 2 | 71392312 | 1 | COULTER ASY., LH |
| 3 | 71392318 | 1 | ARM, SPRING |
| 4 | 71392319 | 1 | BLADE, COULTER |
| 5 | 71392320 | 1 | RIM, DEPTH |
| 6 | 71392321 | 1 | HUB (INCLS. ITEMS 21 & 22) |
| 7 | 71392467 | 1 | SPRING, COULTER |
| 8 | 71392494 | 1 | PIN, ROLL, (SLOTTED) 5/16 X 2 |
| 9 | 71392534 | 6 | BOLT, CARRIAGE, 3/8-16 X 1 |
| 10 | 71392356 | 2 | CAPSCREW, HEX, 1/2-13 X 1 GR5 |
| 11 | 70918787 | 1 | NUT, CASTLE, 3/4-16 (BLACK) |
| 12 | 70918269 | 1 | WASHER, FLAT, 3/4 SAE |
| 13 | 71392550 | 1 | FITTING, GREASE, 1/8 NPT (STRAIGHT) |
| 14 | 71392554 | 2 | BUSHING, MACHINERY, 1-1/4 I.D. 10GA |
| 15 | 71392558 | 1 | PIN, COTTER, 1/8 X 1-3/4 |
| 16 | 71392496 | 4 | BOLT, WHEEL, 1/2-20 |
| 17 | 71392164 | 1 | CAP, DUST (DC12) |
| 18 | 70327535 | 1 | SEAL (14974) |
| 19 | 70327382 | 1 | CONE, BEARING, (LM 67048-INNER) |
| 20 | 831055M1 | 1 | CONE, BEARING, (LM 11949-OUTER) |
| 21 | 70327997 | 1 | CUP, BEARING, (LM 67010-INNER) |
| 22 | 70328002 | 1 | CUP, BEARING, (LM 11910-OUTER) |
| 23 | 70919089 | 2 | CAPSCREW, HEX, 1/2-13 X 1-3/4 GR5 |
| 24 | Y705046 | 2 | WASHER, LOCK, 1/2 |
| 25 | 71392544 | 2 | WASHER, FLAT, 1/2 |
| 26 | 70926007 | 2 | NUT, HEX, 1/2-13 GR5 |
| 27 | 71392595 | 1 | WHEEL ASY., COULTER |
| 28 | 71392314 | 1 | COULTER, UPPER, LH |
| 29 | 71392316 | 1 | COULTER, LOWER, LH |
| 30 | 71392544 | 2 | WASHER, FLAT, 1/2 |
| 31 | 70916965 | 6 | WASHER, LOCK, 3/8 |
| 32 | 70923518 | 6 | NUT, HEX, 3/8-16 |
| 33 | Y705046 | 2 | WASHER, LOCK, 1/2 |