CASE Midrange combine 5130, 6130, 7130
CASE Midrange combine 5130, 6130, 7130 — parts list, part 4 of 4
Assemblies on this page: Parts list (continued) … Parts list (continued).
Parts list (continued)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 30 | 492-11031 | 10 | LOCK WASHER, 5/16″ ARANDELA DE BLOQUEO SICHERUNGSSCHEIBE RONDELLE FREIN 132R |
| 31 | 413-512 | 10 | BOLT, Hex, 5/16″-18 x 3/4″, G5, Full Thd |
| 32 | 144041 | 1 | SEAL, 3/4″ NPT Male x 3/8″ NPT Fem |
| 33 | 217-405 | 2 | PLUG, Hex Hd, 1/4″-18 NPTF |
| 34 | 396-11119 | 1 | WASHER, 1 3/16″ x 2 1/4″ x .134″, HDN |
| 1 | 397128A1 | 1 | HOUSING, Feeder Drive Gear |
| 2 | 390549A1 | 1 | HOUSING, Forward Drive Bell Right Hand |
| 6 | 272712 | 1 | O-RING, -259, 70 Duro, 6.234″ ID x .139″ Thk |
| 7 | 57861H | 2 | BEARING CUP CUBETA DEL COJINETE LAGERSCHALE CUVETTE DE ROULEMENT062A |
| 8 | 390952A1 | 2 | BEARING CONE, 34.925 mm ID x 30.162 mm |
| 9 | 197608R1 | 1 | BEARING ASSY, 1.375″ ID x 3″ OD x 1.1562″ |
| 10 | 197609R91 | 1 | BEARING ASSY, 1.375″ ID x 3″ OD x 1.125″ |
| 11 | 191384C2 | 1 | SHAFT, Forward Drive Driven, Output |
| 12 | 192528C1 | 1 | SEAL, Oil Forward Gear Case Output |
| 13 | 191396C1 | 1 | SHAFT, Forward Gear Case Input |
| 14 | 390547A1 | 1 | HOUSING, Forward Drive Bell, Rear |
| 15 | 938294R91 | 1 | SEAL, Oil Forward Gear Case Input |
| 19 | 510828 | 1 | O-RING, 4.984″ ID x 5.262″ OD x 0.139″ |
| 20 | 87613300 | 2 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 21 | 185413C1 | 2 | NUT TUERCA MUTTER ECROU 5780 |
| 22 | 618024R1 | 1 | BEARING CUP CUBETA DEL COJINETE LAGERSCHALE CUVETTE DE ROULEMENT062A |
| 23 | 618023R91 | 1 | BEARING CONE, 34.9315 mm ID x 18.199 mm |
| 23 | 87589850 | 1 | GEAR SET, Gear Set 36T and 21T Sold In Set HD |
| 24 | 1315599C1 | 1 | GEAR, Forward Driven, 31TENGRANAJE ZAHNRAD PIGNON 050I |
| 25 | 1315598C1 | 1 | GEAR, Forward Driven, 18TENGRANAJE ZAHNRAD PIGNON 050I |
| 26 | 191397C2 | 1 | GASKET, Forward Gear Case |
| 27 | 416615A1 | 1 | COVER, Oil Circulation CUBIERTA ABDECKUNG COUVERCLE 265C |
| 28 | 492-11038 | 17 | LOCK WASHER, 3/8″ ARANDELA DE BLOQUEO SICHERUNGSSCHEIBE RONDELLE FREIN 132R |
| 29 | 413-612 | 7 | BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd |
| 30 | 413-620 | 10 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 31 | 192527C1 | 1 | SEAL, Oil Forward Gear Case Input |
| 32 | 221-1142 | 1 | PIPE, Nipple, 1/4″ NPT x 4 1/2″ |
| 33 | 221-1344 | 1 | COUPLING CRUCETA KERNSTUECK NOIX Z570 |
| 34 | 219-434 | 2 | BREATHER, 1/8″-27 NPT, Short, w/washer |
| 35 | 405462R1 | 1 | GASKET, Oil Filter Case JUNTA DICHTUNG JOINT 123G |
| 36 | 242234A1 | 1 | HOUSING, Oil Filter Cover ALOJAMIENTO GEHÄUSE CARTER 014V |
| 37 | 398059A1 | 1 | SPECIAL BOLT, Center Drain |
| 38 | 238-5013 | 1 | O-RING, 0.426″ ID x 0.566″ OD x 0.07″ |
| 39 | 218-5153 | 1 | PLUG, Hex Hd, 7/16″-20 ORB |
| 40 | 1339006C1 | 1 | TUBE, 914 mm Length, Grease Line |
| 41 | 219-8 | 1 | LUBE NIPPLE, 1/4″-28 NPT x .54″ lg |
| 42 | 426559A1 | 1 | HOSE, Oil Circulation MANGUERA SCHLAUCH FLEXIBLE 4480 |
| 43 | 214-3228 | 2 | HOSE CLAMP, 1.00/1.875 HD Worm, W/liner |
| 44 | 426552A1 | 1 | TUBE, Forward Gear Case Circulation |
| 45 | 195485C1 | 1 | SHIM KIT, Incl 3 – 5 KIT DE COMPENSADOR UNTERLEGSCHEIBENSATZKIT DE CALES P688 |
| 46 | 195484C2 | 1 | SHIM KIT, Incl 16 – 18 KIT DE COMPENSADOR UNTERLEGSCHEIBENSATZKIT DE CALES P688 |
| 47 | 1315597C1 | 1 | GEAR SET, Incl 24, 25 JUEGO DE ENGRANAJES ZAHNRADSATZ ENSEMBLE ENGRENAGE 286C |
| 1 | 87571158 | 1 | HOUSING, Feeder Drive Housing |
| 2 | 87571128 | 1 | HOUSING, Feeder Drive Output Shaft Housing |
| 6 | 14468780 | 1 | O-RING, 8.734″ ID x 9.012″ OD x 0.139″ |
| 7 | 392678R91 | 3 | TAPERED ROLLER BEARING |
| 10 | 699615 | 2 | BEARING ASSY, 2.0005″ ID x 3.626″ OD x 1″ |
| 11 | 87571130 | 1 | SHAFT, Foward Drive Driven Shaft Output |
| 12 | 87571139 | 1 | OIL SEAL, 63.5×95.1×9.5 JUNTA DE ACEITE ÖLDICHTUNG JOINT ETANCHEITE D’HUILEP278 |
| 14 | 87571144 | 1 | HOUSING, Forward Drive Bell Housing, Rear |
| 15 | 87485525 | 1 | RUBBER SEAL, Oil Seal 41.275 x 61.90 x 8.0 NBR |
| 19 | 14467080 | 1 | O-RING, 5.234″ ID x 5.512″ OD x 0.139″, 125 x 5.250 in Class 5 |
| 20 | 86637954 | 1 | WASHER, 1 1/16″ x 2″ x .209″ |
| 21 | 194737C1 | 2 | NUT, 1.0 – 14 Grade 5 TUERCA MUTTER ECROU 5780 |
| 22 | 455388C91 | 2 | BEARING, ROLLER, 1.6255″ ID x 3.251″ OD x 0.795, 1.045″ |
| 24 | 87571156 | 1 | SHAFT, Forward Gear Case Input Shaft |
| 25 | 87589850 | 2 | GEAR SET, Gear Foward Driver 21T |
| 26 | 87571140 | 1 | WASHER, 1.062 x 2.50 x .312 in HDN |
| 27 | 84191585 | 1 | COVER ASSY, Forward GearBox HD |
| 28 | 86625011 | 14 | BOLT, Hex, M10 x 35, 10.9, Full Thd |
| 29 | 87015733 | 9 | BOLT, M10x25 Full CL10.9 PHC |
| 30 | 169948C91 | 1 | SEAL, Oil Seal 57.5 x 82.6 x 9.5 |
| 31 | 219690R91 | 3 | ROLLER BEARING, 1.625″ ID x 3.75″ OD x 1.1875″, CONE- CUP is 170234R1. CUP and CONE is 219691R91 |
| 32 | 219-434 | 1 | BREATHER, 1/8″-27 NPT, Short, w/washer, Fitting , Lube 1/8-27 Dryseal PTF Airvent |
| 33 | 405462R1 | 1 | GASKET, Gasket Oil Filter Case |
| 34 | 242234A1 | 1 | HOUSING, Assy Oil Filter Cover |
| 35 | 398059A1 | 1 | SPECIAL BOLT, Bolt Center Drain |
| 36 | 14453080 | 1 | O-RING, 0.426″ ID x 0.07″ JUNTA TÓRICA O-RING JOINT TORIQUE 055A |
| 37 | 9672438 | 1 | PLUG, Hex Hd, 7/16″-20 ORB |
| 40 | 86568834 | 1 | PLUG, Hex Hd, 1/4″-18 NPTF, 1 |
| 45 | 426559A1 | 1 | HOSE MANGUERA SCHLAUCH FLEXIBLE 4480 |
| 46 | 214-3228 | 2 | HOSE CLAMP, 1.00/1.875 HD Worm, W/liner |
| 47 | 87571146 | 1 | HYD. TUBE, 25.4 mm OD x 325 mm L |
| 49 | 86625119 | 1 | PLUG, 1-5/16 – 12 SLT Hex HD W/O-ring |
| 1 | 84289579 | 1 | FEEDER, Rock Trap ALIMENTADOR SCHRÄGFÖRDERER CONVOYEUR 544A |
| 2 | 87674272 | 1 | SPROCKET ASSY., Beater, 23T |
| 3 | 87577310 | 1 | COVER, Beater Housing COBERTURA ABDECKUNG COUVERTURE 271C |
| 4 | 84128119 | 1 | SHEET METAL, Rock Trap, Inner, Upper |
| 6 | 87755523 | 1 | SHEET METAL, Rock Trap, Lower, Front |
| 7 | 84128122 | 1 | SHEET METAL, Rock Trap, Cover |
| 8 | 87674299 | 1 | BRACKET, Transducer, Rock Trap |
| 9 | 84413157 | 1 | CHAIN (AG), Rock Trap, 54 Pitch, Incl 10 |
| 10 | 84360213 | 1 | LINK ESLABÓN KETTENGLIED; GLIED; BINDEGLIEDMAILLON ; ARTICULATION5290 |
| 11 | 87557056 | 1 | NOTCHED DISK, Feeder Speed Pickup |
| 12 | 87602131 | 1 | DOOR, Feeder – PTD PUERTA TÜR PORTE 180P |
| 13 | 193611C2 | 1 | HINGE, Feed Plate BISAGRA SCHARNIER CHARNIERE 4260 |
| 14 | 245193C2 | 1 | SENSOR, Transducer (MPH and RPM), Transmission and Fan |
| 15 | 175931C1 | 1 | ROD, Feed Door VARILLA STANGE TRINGLE 7250 |
| 16 | 87720413 | 1 | SUPPORT, Feeder Top Seal Support |
| 17 | 634248R2 | 1 | SEAL, Feeder ANILLO DE CIERRE DICHTUNG JOINT 132A |
| 18 | 132657A2 | 1 | CABLE, Reverser Shield Tether |
| 20 | 87709107 | 2 | SPACER, Rock Trap SEPARADOR DISTANZSTÜCK ENTRETOISE 075D |
| 22 | 516-23127 | 1 | CLAMP, J, 9/16″ Insul, 3/8″ Bolt |
| 23 | 87675531 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 24 | 87017606 | 2 | SELF-TAP SCREW, Hex Flg Hd, M6 x 20 |
| 25 | 87698833 | 6 | BOLT PERNO SCHRAUBE VIS 140B |
| 26 | 87698836 | 24 | BOLT PERNO SCHRAUBE VIS 140B |
| 27 | 87698839 | 14 | BOLT PERNO SCHRAUBE VIS 140B |
| 28 | 87695414 | 6 | BOLT PERNO SCHRAUBE VIS 140B |
| 29 | 87497922 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 30 | 86633356 | 1 | CARRIAGE BOLT, Short NK, M10 x 25, Cl8.8, Full Thd |
| 31 | 86050300 | 4 | NUT, M6 x 1, Flg, Cl10 TUERCA MUTTER ECROU 010D |
| 32 | 86050279 | 36 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 33 | 87752066 | 2 | NUT TUERCA MUTTER ECROU 010D |
| 35 | 86511329 | 2 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 36 | 87499320 | 2 | SPACER, Feeder Retainer Bolt |
| 37 | 140045 | 24 | BELLEVILLE WASHER, M10 |
| 38 | 1320776C1 | 1 | SUPPORT SOPORTE STÜTZE SUPPORT 300S |
| 39 | 1320922C2 | 3 | BLADE, Not Shown CUCHILLA KLINGE LAME 0700 |
| 39 | 1324437C1 | 3 | EXTENSION, Smooth Extension |
| 40 | 434-624 | 18 | CARRIAGE BOLT, Short NK, 3/8″-16 x 1 1/2″, G5 |
| 41 | 492-11038 | 18 | LOCK WASHER, 3/8″ ARANDELA DE BLOQUEO SICHERUNGSSCHEIBE RONDELLE FREIN 132R |
| 42 | 425-106 | 18 | NUT, 3/8″-16, G5 TUERCA MUTTER ECROU 010D |
| 1 | 84164018 | 1 | CONE, Extended Wear (includes 1-8) |
| 2 | 418655A2 | 1 | STIFFENER, Vane, Short, Extended Wear |
| 3 | 418654A2 | 4 | STIFFENER, Vane, Long, Extended Wear |
| 4 | 347913A1 | 1 | STIFFENER, Vane, Extension, Extended Wear |
| 5 | 347918A1 | 1 | STIFFENER, Vane, Pocket, Extended Wear |
| 6 | 87106338 | 47 | BOLT PERNO SCHRAUBE VIS 140B |
| 7 | 87547587 | 47 | NUT TUERCA MUTTER ECROU 010D |
| 8 | 140045 | 47 | BELLEVILLE WASHER, M10 |
| 9 | 291127A1 | 1 | GUARD, Door, Rotor Front GUARDA SCHUTZ GARANT 4040 |
| 10 | 419957A1 | 1 | STRIP BANDA STREIFEN BANDE 8660 |
| 11 | 233482A1 | 2 | SEAL SELLO/RETEN DICHTRING JOINT-D’ETANCHEITE 7460 |
| 12 | 87030508 | 4 | BOLT, Hex Flg, M12 x 30, 10.9, Full Thd |
| 13 | 86512497 | 4 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 14 | 87656137 | 4 | BOLT, Hex Flg, M8 x 20, 10.9, Full Thd |
| 15 | 86507066 | 4 | NUT, M8 x 1.25, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 16 | 413-88 | 1 | BOLT, Hex, 1/2″-13 x 1/2″, G5, Full Thd |
| 17 | 359211 | 2 | BOLT, Hex, M16 x 150, 8.8, Full Thd |
| 18 | 86512498 | 2 | NUT, M16 x 2, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 19 | 87029779 | 1 | SEAL ANILLO DE CIERRE DICHTUNG JOINT 132A |
| 20 | 9835349 | 6 | CAP TAPÓN KAPPE CAPUCHON 052T |
| 1 | 84164007 | 1 | CONE, Standard HD Assembly (Includes |
| 2 | 418655A2 | 1 | STIFFENER, Vane, Short, Extended Wear |
| 3 | 418654A2 | 4 | STIFFENER, Vane, Long, Extended Wear |
| 4 | 347913A1 | 1 | STIFFENER, Vane, Cone Extension, Extended Wear |
| 5 | 347918A1 | 1 | STIFFENER, Vane, Cone Pocket, Extended Wear |
| 6 | 87106338 | 47 | BOLT PERNO SCHRAUBE VIS 140B |
| 7 | 87547587 | 47 | NUT TUERCA MUTTER ECROU 010D |
| 8 | 140045 | 47 | BELLEVILLE WASHER, M10 |
| 9 | 193607C3 | 1 | SUPPORT, Door, Rotor Front |
| 10 | 419957A1 | 1 | STRIP BANDA STREIFEN BANDE 8660 |
| 11 | 233482A1 | 2 | SEAL SELLO/RETEN DICHTRING JOINT-D’ETANCHEITE 7460 |
| 12 | 87030508 | 4 | BOLT, Hex Flg, M12 x 30, 10.9, Full Thd |
| 13 | 86512497 | 4 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 14 | 87656137 | 4 | BOLT, Hex Flg, M8 x 20, 10.9, Full Thd |
| 15 | 86507066 | 4 | NUT, M8 x 1.25, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 16 | 413-88 | 1 | BOLT, Hex, 1/2″-13 x 1/2″, G5, Full Thd |
| 17 | 120248 | 2 | BOLT, Hex, M16 x 100, 8.8, Full Thd |
| 18 | 86512498 | 2 | NUT, M16 x 2, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 19 | 87029779 | 1 | SEAL ANILLO DE CIERRE DICHTUNG JOINT 132A |
| 20 | 9835349 | 6 | CAP TAPÓN KAPPE CAPUCHON 052T |
| 1 | 84289579 | 1 | FEEDER, Rock Trap, Incl 2 – 28 |
| 2 | 84289581 | 1 | HOUSING, HOUSING, Stone Trap |
| 3 | 87644726 | 1 | BEATER, Rock Trap LANZADOR DE PAJA WENDETROMMEL TIRE-PAILLE P632 |
| 4 | 87597579 | 1 | STONE DOOR, DOOR, Rock Trap |
| 5 | 87573705 | 2 | SUPPORT ASSY., Seal Back Up Plate |
| 6 | 87620467 | 2 | BEARING ASSY, 44.475 mm ID x 100 mm OD x 42.862 mm |
| 7 | 87599206 | 1 | SPACER, Rock Trap, Right Hand |
| 8 | 87599214 | 1 | SPACER, Rock Trap, Left Hand |
| 9 | 87612181 | 1 | HINGE, Rock Trap Door BISAGRA SCHARNIER CHARNIERE 4260 |
| 10 | 87599255 | 1 | ANGLE, Door Seal, Rock Trap |
| 11 | 87573700 | 2 | EYEBOLT, Rock Trap CÁNCAMO AUGENSCHRAUBE BOULON A ŒIL 081G |
| 12 | 84289595 | 1 | ANGLE, Rock Trap Wear ÁNGULO WINKEL CORNIERE 057C |
| 13 | 87612311 | 2 | TUBE, 12.7-19.05 mm ID x 25.4 mm OD x 90 mm L, Sump Latch Pivot |
| 14 | 84256524 | 1 | ROD, Trap Door, Hinge VARILLA STANGE TRINGLE 7250 |
| 15 | 195202C1 | 2 | SEAL, Feeder SELLO/RETEN DICHTRING JOINT-D’ETANCHEITE 7460 |
| 16 | 87740715 | 1 | SPACER, Sprocket SEPARADOR DISTANZSTÜCK ENTRETOISE 075D |
| 17 | 84353399 | 1 | ROD, Door Latch Crank, Rock Trap |
| 18 | 87755517 | 1 | SHAFT, Stone Trap EJE WELLE ARBRE 016A |
| 19 | 847-3820 | 15 | SCREW, Sltd Tr Hd, M8 x 20, 10.9, Serr |
| 20 | 87573369 | 6 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 21 | 100016 | 2 | NUT, M10, Cl 8 TUERCA MUTTER ECROU 010D |
| 22 | 825-5148 | 19 | NUT, M8, Flg Ser TUERCA MUTTER ECROU 010D |
| 23 | 825-51410 | 6 | NUT, M10, Flg Ser TUERCA MUTTER ECROU 010D |
| 24 | 100037 | 2 | NUT, M10 x 1.5, Cl 8 TUERCA MUTTER ECROU 010D |
| 27 | 432-1224 | 2 | COTTER PIN, 3/16″ x 1 1/2″ |
| 28 | 432-2040 | 2 | COTTER PIN, 5/16″ x 2 1/2″ |
| 1 | 87755510 | 1 | SUPPORT ASSY., Idler Arm, Rock Trap |
| 2 | 87755503 | 1 | ARM ASSY., Idler, Rock Trap |
| 3 | 87477658 | 1 | SPROCKET, 12T, 16 mm Bore |
| 4 | 87578627 | 1 | EYEBOLT, Idler, Rock TrapCÁNCAMO AUGENSCHRAUBE BOULON A ŒIL 081G |
| 5 | 390870A1 | 1 | PIVOT, Rock Trap Idler BoltPIVOTE DREHZAPFEN PIVOT 6330 |
| 6 | 394120A1 | 2 | WASHER, Feeder Idler ARANDELA UNTERLEGSCHEIBE RONDELLE 9720 |
| 7 | 390872A1 | 1 | SPRING MUELLE FEDER RESSORT 8315 |
| 8 | 390869A1 | 1 | SPACER, Adjusting Spring Bolt |
| 9 | 87755999 | 1 | BUSHING, Idler Pivot, Rock Trap |
| 10 | 439-11048 | 1 | HEADED PIN, 5/8″ x 3″ PASADOR CON CABEZA KOPFZAPFEN GOUPILLE A TETE P888 |
| 11 | 87698848 | 1 | BOLT PERNO SCHRAUBE VIS 140B |
| 12 | 87646188 | 1 | BOLT PERNO SCHRAUBE VIS 140B |
| 13 | 100020 | 2 | NUT, M16, Cl 8 TUERCA MUTTER ECROU 010D |
| 14 | 87016581 | 1 | LOCK NUT, M16 x 2, Flg, Cl 10 |
| 15 | 496-21066 | 3 | WASHER, 21/32″ x 1 5/16″ x .150″ |
| 16 | 496-41066 | 9 | WASHER, 21/32″ x 1 1/2″ x .188″, HDN |
| 17 | 495-81030 | 2 | WASHER, 21/32″ x 2″ x .179″ |
| 18 | 432-1220 | 1 | COTTER PIN, 3/16″ x 1 1/4″ |
| 19 | 45396 | 1 | BALL BEARING, 25.4 mm ID x 52 mm OD x 21.4 mm |
| 20 | 84130591 | 1 | SPACER SEPARADOR DISTANZSTÜCK ENTRETOISE 075D |
| 1 | 418647A1 | 1 | CONCAVE, Front, Small Wire, Incl 3 – 5, 19 |
| 1 | 386188A1 | 1 | CONCAVE, Front, Large Wire, Incl 3 – 5 |
| 1 | 418645A1 | 1 | CONCAVE, Front, Large Wire, Incl 3 – 5, 19 |
| 1 | 87456655 | 1 | CONCAVE, Round Bar, Front, Incl 3 – 5, 19 |
| 1 | 412395A1 | 2 | CONCAVE, No. 2 And 3, Round Bar With Removable Wire, Incl 3 – 5 |
| 2 | 418646A1 | 2 | CONCAVE, No. 2 and 3, Large Wire, Incl 3 – 5, 19 |
| 3 | 386352A1 | 14 | WIRE, Concave, Large WireALAMBRE KABEL FIL D’ACIER 9880 |
| 3 | 418158A1 | 30 | WIRE, Concave, Small WireALAMBRE KABEL FIL D’ACIER 9880 |
| 3 | 412400A1 | 10 | WIRE, Concave, Smooth ALAMBRE KABEL FIL D’ACIER 061F |
| 4 | 450-73816 | 8 | SCREW, CrossSerr Truss Hd, 3/8″-16 x 1″ |
| 5 | 231-5146 | 8 | NUT, Flg, USR, 3/8″-16 TUERCA MUTTER ECROU 010D |
| 7 | 191536C1 | 9 | CHANNEL, Grate Adjusting, Corn, Used With 191535C2, REF 10 |
| 8 | 477-73112 | 27 | SCREW, Slotted Tr Hd Serr, 5/16″-18 x 3/4″ |
| 9 | 231-5145 | 27 | FLANGE NUT, Flg, USR, 5/16″-18 |
| 10 | 191535C2 | 3 | GRATE, Slotted, Grain PARRILLA GITTER GRILLE 3960 |
| 10 | 1302563C1 | 3 | GRATE, Keystock PARRILLA GITTER GRILLE 3960 |
| 11 | 410-7620 | 10 | BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr |
| 10 | 1319405C1 | 3 | GRATE, Smooth PARRILLA GITTER GRILLE 3960 |
| 11 | 410-7616 | 2 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr, G8 |
| 12 | 231-5146 | 12 | NUT, Flg, USR, 3/8″-16 TUERCA MUTTER ECROU 010D |
| 14 | 186784C2 | 3 | BAR BARRA STAB BARRE 0500 |
| 15 | 600179R1 | 6 | SPACER, 1/2″ X-Strng Pipe x 9/16″ |
| 16 | 281058 | 6 | BOLT, Hex, 1/2″-13 x 2″, G8PERNO SCHRAUBE VIS 140B |
| 17 | 495-11053 | 6 | WASHER, 1/2″, SAE ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 18 | 232-4118 | 6 | LOCK NUT, 1/2″-13, GC TUERCA DE BLOQUEO SICHERUNGSMUTTER CONTRE-ECROU P263 |
| 19 | 193859C1 | 2 | PLATE, Concave PLACA PLATTE PLAQUE 105P |
| 19 | 87456656 | 2 | RETAINER, Concave TOPE HALTER ARRETOIR 7125 |
| 20 | 316772A1 | 1 | CONCAVE, Front Smooth Slotted, No. 1 |
| 21 | 316773A1 | 1 | EXTENSION, Concave, Front Smooth, No. 1 |
| 21 | 316774A1 | 2 | EXTENSION, Concave, Front Smooth, No. 2 and 3 |
| 22 | 410-7616 | 4 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr, G8 |
| 23 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 TUERCA MUTTER ECROU 010D |
| 24 | 316778A1 | 2 | CONCAVE, Front Smooth Slotted, No. 2 and 3 |
| 25 | 352729A1 | 1 | CONCAVE, Slotted Front With Extension, Incl 20-23 |
| 26 | 352730A1 | 2 | CONCAVE, Slotted 2 And 3 With Extension, Incl 21-24 |
| 28 | 348505A1 | 1 | PACKAGE, DIA, Slotted Concave With Extension, Incl 25, 26 |
| 1 | 142607A2 | 1 | HOUSING, Incl 2, 3 CARCASA GEHAEUSE CARTER 4540 |
| 2 | 551068R1 | 2 | BUSHING CASQUILLO BUECHSE DOUILLE 1140 |
| 3 | 568921R1 | 1 | BUSHING CASQUILLO BUECHSE DOUILLE 1140 |
| 4 | 409-7620 | 2 | BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr |
| 4 | 409-7624 | 2 | BOLT, Hex Flg, 3/8″-16 x 1 1/2″, Serr |
| 5 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 TUERCA MUTTER ECROU 010D |
| 6 | 185779A2 | 1 | SUPPORT SOPORTE STÜTZE SUPPORT 300S |
| 7 | 409-7616 | 1 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 8 | 231-5146 | 1 | NUT, Flg, USR, 3/8″-16 TUERCA MUTTER ECROU 010D |
| 9 | 131436A2 | 1 | SHAFT ARBOL WELLE ARBRE 7590 |
| 10 | 232-41110 | 1 | LOCK NUT, 5/8″-11, GC TUERCA DE BLOQUEO SICHERUNGSMUTTER CONTRE-ECROU P263 |
| 11 | 496-11066 | 2 | WASHER, 21/32″ x 1 5/16″ x .095″, HDN |
| 12 | 143239A2 | 1 | MOTOR, ELECTRIC, Concave Control |
| 13 | 413-880 | 1 | BOLT, Hex, 1/2″-13 x 5″, G5PERNO SCHRAUBE VIS 140B |
| 14 | 231-1448 | 1 | NUT, 1/2″-13, GB TUERCA MUTTER ECROU 010D |
| 15 | 135406A2 | 1 | GEAR, 20T, Driver ENGRANAJE ZAHNRAD PIGNON 050I |
| 16 | 413-428 | 1 | BOLT, Hex, 1/4″-20 x 1 3/4″, G5 |
| 17 | 230-4214 | 1 | LOCK NUT, 1/4″-20, GA TUERCA DE BLOQUEO SICHERUNGSMUTTER CONTRE-ECROU P263 |
| 18 | 135410A2 | 1 | GEAR, 70T, Driven ENGRANAJE ZAHNRAD PIGNON 050I |
| 19 | 413-436 | 1 | BOLT, Hex, 1/4″-20 x 2 1/4″, G5 |
| 20 | 230-4214 | 1 | LOCK NUT, 1/4″-20, GA TUERCA DE BLOQUEO SICHERUNGSMUTTER CONTRE-ECROU P263 |
| 21 | 144528A1 | 1 | SHIELD PROTECTOR SCHUTZSCHILD GARANT 7740 |
| 22 | 214-1540 | 1 | HOSE CLAMP, #40, 2.06/3.00 Type F Worm, W/liner |
| 23 | 192886C1 | 1 | NUT TUERCA MUTTER ECROU 5780 |
| 24 | 192888C1 | 2 | PLATE, Concave Control PLACA PLATTE PLAQUE 105P |
| 25 | 188168C1 | 1 | PLATE, Concave Indicator PLACA PLATTE PLAQUE 105P |
| 26 | 276-1458 | 2 | SELF-TAP SCREW, Hex Hd, #10 x 1/2″ |
| 27 | 439-1848 | 1 | HEADED PIN, 1/2″ x 3″ PASADOR CON CABEZA KOPFZAPFEN GOUPILLE A TETE P888 |
| 28 | 439-1838 | 1 | HEADED PIN, 1/2″ x 2 3/8″ PASADOR CON CABEZA KOPFZAPFEN GOUPILLE A TETE P888 |
| 29 | 432-1216 | 2 | COTTER PIN, 3/16″ x 1″ PASADOR SPLINT GOUPILLE FENDUE 270C |
| 30 | 191422C2 | 1 | LEVER PALANCA HEBEL LEVIER 045L |
| 31 | 439-1823 | 2 | HEADED PIN, 1/2″ x 1 7/16″ |
| 32 | 216698 | 2 | HAIR PIN COTTER, Int, 5/16″ x 1.75″ x 0.125″ |
| 33 | 188351C1 | 1 | HUB MAZA NABE MOYEU 4560 |
| 34 | 192890C2 | 1 | HUB MAZA NABE MOYEU 4560 |
| 35 | 86629541 | 4 | BOLT, Hex, M12 x 40, 8.8, Full Thd |
| 36 | 86512497 | 4 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 37 | 87036416 | 2 | SPACER, 3/4″ Pipe x 1 1/16″ |
| 1 | 142607A2 | 1 | HOUSING, Concave Control, Electric |
| 2 | 131436A2 | 1 | SHAFT, Concave Control, Electric |
| 3 | 496-11066 | 2 | WASHER, 21/32″ x 1 5/16″ x .095″, HDN |
| 4 | 143239A2 | 1 | MOTOR, ELECTRIC, Concave Control |
| 5 | 192886C1 | 1 | NUT, Concave Control Adjusting |
| 6 | 192888C1 | 2 | PLATE, Concave Control Upper |
| 7 | 144528A1 | 1 | SHIELD, Concave Control PROTECTOR SCHUTZSCHILD GARANT 7740 |
| 8 | 135406A2 | 1 | GEAR, 20T, Auto Concave Control |
| 9 | 135410A2 | 1 | GEAR, 70T, Auto Concave Control |
| 10 | 413-880 | 1 | BOLT, Hex, 1/2″-13 x 5″, G5PERNO SCHRAUBE VIS 140B |
| 11 | 87036416 | 2 | SPACER, 3/4″ Pipe x 1 1/16″ |
| 12 | 413-428 | 1 | BOLT, Hex, 1/4″-20 x 1 3/4″, G5 |
| 13 | 413-436 | 1 | BOLT, Hex, 1/4″-20 x 2 1/4″, G5 |
| 14 | 214-1540 | 1 | HOSE CLAMP, #40, 2.06/3.00 Type F Worm, W/liner |
| 15 | 231-1448 | 1 | NUT, 1/2″-13, GB TUERCA MUTTER ECROU 010D |
| 16 | 232-41110 | 1 | LOCK NUT, 5/8″-11, GC TUERCA DE BLOQUEO SICHERUNGSMUTTER CONTRE-ECROU P263 |
| 17 | 230-4214 | 2 | LOCK NUT, 1/4″-20, GA TUERCA DE BLOQUEO SICHERUNGSMUTTER CONTRE-ECROU P263 |
| 18 | 439-1838 | 1 | HEADED PIN, 1/2″ x 2 3/8″ PASADOR CON CABEZA KOPFZAPFEN GOUPILLE A TETE P888 |
| 19 | 432-1216 | 1 | COTTER PIN, 3/16″ x 1″ PASADOR SPLINT GOUPILLE FENDUE 270C |
| 1 | 1338041C2 | 2 | SUPPORT APOYADERO STUETZE SUPPORT 8790 |
| 2 | 87036180 | 10 | BOLT, Hex, Lock, M16 x 35, Cl 10.9 |
| 3 | 87301493 | 5 | NUT, Flg, USR, 5/8″-11, G8TUERCA MUTTER ECROU 010D |
| 3 | 1338079C1 | 5 | NUT, 5/8 TUERCA MUTTER ECROU 5780 |
| 4 | 1317229C1 | 1 | SUPPORT, RH APOYADERO STUETZE SUPPORT 8790 |
| 5 | 805-12030 | 6 | BOLT, Hex, Lock, M12 x 30, Cl 10.9 |
| 6 | 86512497 | 6 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 7 | 1317233C1 | 2 | SUPPORT APOYADERO STUETZE SUPPORT 8790 |
| 8 | 87698846 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 9 | 496-41053 | 4 | WASHER, 17/32″ x 1 1/4″ x 3/16″ |
| 10 | 87681209 | 2 | NUT TUERCA MUTTER ECROU 010D |
| 11 | 282766A1 | 1 | SUPPORT APOYADERO STUETZE SUPPORT 8790 |
| 12 | 87691372 | 6 | BOLT, EYE TORNILLO (OJO) AUGENBOLZEN BOULON (OEIL) P612 |
| 13 | 9706685 | 12 | NUT, M12, Cl 8 TUERCA MUTTER ECROU 010D |
| 14 | 279086A1 | 1 | SHAFT EJE WELLE ARBRE 016A |
| 15 | 87627461 | 1 | SUPPORT ASSY. APOYADERO (CONJUNTO)STUETZE (KPLT.) SUPPORT (ASSEMBLE) P427 |
| 16 | 87698837 | 15 | BOLT PERNO SCHRAUBE VIS 140B |
| 17 | 86050279 | 15 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 18 | 439-1823 | 2 | HEADED PIN, 1/2″ x 1 7/16″ |
| 19 | 216698 | 2 | HAIR PIN COTTER, Int, 5/16″ x 1.75″ x 0.125″ |
| 20 | 1318880C1 | 1 | SUPPORT APOYADERO STUETZE SUPPORT 8790 |
| 21 | 477-82512 | 2 | SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″ |
| 22 | 231-5144 | 2 | NUT, Flg, USR, 1/4″-20 TUERCA MUTTER ECROU 010D |
| 23 | 84156112 | 1 | BOLT, EYE TORNILLO (OJO) AUGENBOLZEN BOULON (OEIL) P612 |
| 24 | 1318894C2 | 1 | SUPPORT SOPORTE STÜTZE SUPPORT 300S |
| 25 | 86512497 | 2 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 26 | 496-41066 | 10 | WASHER, 21/32″ x 1 1/2″ x .188″, HDN |
| 27 | 177662C2 | 2 | EYEBOLT CÁNCAMO AUGENSCHRAUBE BOULON A ŒIL 081G |
| 28 | 425-108 | 6 | TUBE NUT, 1/2″-13, G5 TUERCA DE TUBO ROHRMUTTER ECROU DE TUYAU 0030 |
| 29 | 496-21053 | 4 | WASHER, 17/32″ x 1 1/16″ x .134″ |
| 30 | 434-824 | 2 | CARRIAGE BOLT, Short NK, 1/2″-13 x 1 1/2″, G5, Full Thd |
| 31 | 80679 | 2 | LOCK WASHER, 1/2″ ARANDELA DE BLOQUEO SICHERUNGSSCHEIBE RONDELLE FREIN 132R |
| 32 | 1318893C2 | 1 | BAR BARRA STAB BARRE 0500 |
| 1 | 87030508 | 4 | BOLT, Hex Flg, M12 x 30, 10.9, Full Thd |
| 2 | 87343550 | 6 | BOLT PERNO SCHRAUBE VIS 140B |
| 3 | 86512497 | 14 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 4 | 84407377 | 1 | CHANNEL, Separator Belt Support |
| 5 | 87698836 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 6 | 86050279 | 6 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 7 | 87677576 | 1 | HOSE, 12.70 mm ID, Separator Belt Channel |
| 8 | 495-11053 | 1 | WASHER, 1/2″, SAE ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 9 | 432-1216 | 1 | COTTER PIN, 3/16″ x 1″ PASADOR SPLINT GOUPILLE FENDUE 270C |
| 10 | 87395015 | 1 | TUBE, 675 mm L, Separator Jackshaft Support |
| 11 | 425-1112 | 2 | NUT, 3/4″-16, G5 TUERCA MUTTER ECROU 010D |
| 12 | 84129118 | 1 | SUPPORT, Separator Belt Trap |
| 13 | 87393441 | 1 | SHIELD, Separator Belt, Driven Pulley |
| 14 | 87698835 | 3 | BOLT PERNO SCHRAUBE VIS 140B |
| 15 | 293817A1 | 1 | GUIDE, Separator Belt GUIA FUEHRUNG GUIDE 4060 |
| 16 | 847-3820 | 2 | SCREW, Sltd Tr Hd, M8 x 20, 10.9, Serr |
| 17 | 87695426 | 2 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 18 | 87695427 | 2 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 19 | 86507066 | 2 | NUT, M8 x 1.25, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 1 | 84549785 | 1 | SUPPORT, Rotor Gearbox SOPORTE STÜTZE SUPPORT 300S |
| 2 | 84338842 | 1 | SUPPORT, Rotor Gearbox, Rear |
| 3 | 84338844 | 1 | SUPPORT, Rotor Gearbox, Front |
| 5 | 193946C1 | 1 | TUBE, 12.7 mm OD, Dipstick |
| 6 | 477-73112 | 2 | SCREW, Slotted Tr Hd Serr, 5/16″-18 x 3/4″ |
| 7 | 194066C91 | 1 | DIPSTICK, Rotor Drive VARILLA DEL NIVEL PEILSTAB JAUGE A HUILE P763 |
| 8 | 231-5145 | 2 | FLANGE NUT, Flg, USR, 5/16″-18 |
| 9 | 194043C1 | 1 | HYDRAULIC HOSE, 12.70 mm ID x 483.00 mm, Fill and Drain |
| 10 | 163493C1 | 1 | STRIP BANDA STREIFEN BANDE 8660 |
| 11 | 214-1706 | 2 | HOSE CLAMP, #6, 0.44/0.78 Type M Worm |
| 12 | 87406696 | 1 | BRACKET, Rotor Gearbox Support |
| 13 | 188143C1 | 1 | EYEBOLT, Gear Housing CÁNCAMO AUGENSCHRAUBE BOULON A ŒIL 081G |
| 14 | 495-81030 | 2 | WASHER, 21/32″ x 2″ x .179″ |
| 15 | 425-1010 | 2 | NUT, 5/8″-11, G5 TUERCA MUTTER ECROU 010D |
| 16 | 439-5832 | 1 | HEADED PIN, 1/2″ x 2″ PASADOR CON CABEZA KOPFZAPFEN GOUPILLE A TETE P888 |
| 17 | 432-1216 | 1 | COTTER PIN, 3/16″ x 1″ PASADOR SPLINT GOUPILLE FENDUE 270C |
| 18 | 492-11038 | 4 | LOCK WASHER, 3/8″ ARANDELA DE BLOQUEO SICHERUNGSSCHEIBE RONDELLE FREIN 132R |
| 19 | 413-616 | 4 | BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd |
| 20 | 492-11050 | 4 | LOCK WASHER, 1/2″ ARANDELA DE BLOQUEO SICHERUNGSSCHEIBE RONDELLE FREIN 132R |
| 21 | 413-828 | 4 | BOLT, Hex, 1/2″-13 x 1 3/4″, G5 |
| 22 | 896-11012 | 2 | WASHER, M13.5 x 24.5 x 3, HT |
| 23 | 614-12040 | 2 | BOLT, Hex, M12 x 40, 8.8, Full Thd |
| 24 | 237-6008 | 1 | O-RING, 0.176″ ID x 0.316″ OD x 0.07″ |
| 25 | 217-348 | 1 | FITTING, 90º, 1/2″ Hose x 3/4″-16 ORB Beaded |
| 26 | 87406697 | 1 | PLATE, Rotor Gearbox Support |
| 27 | 87529307 | 6 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 28 | 87342019 | 1 | BOLT, Hex, M20 x 2.5 x 40mm, Class 10.9, Full Thd, DOR |
| 29 | 87024335 | 2 | BOLT, Hex, M20 x 80, 10.9, Full Thd |
| 30 | 87619751 | 3 | NUT TUERCA MUTTER ECROU 010D |
| 1 | 87495307 | 6 | BOLT PERNO SCHRAUBE VIS 140B |
| 2 | 86592701 | 6 | WASHER, M12 x 35 x 5, HTARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 3 | 412123 | 6 | LOCK WASHER, M12 x 21 x 2.6 Thk |
| 4 | 337475 | 6 | NUT, M12, Cl 10 TUERCA MUTTER ECROU 010D |
| 5 | 87695427 | 4 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 6 | 87698855 | 4 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 7 | 87698836 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 8 | 86050279 | 4 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 9 | 87744680 | 1 | HOUSING, Separator Jackshaft, 5130 Only |
| 9 | 87609224 | 1 | HOUSING ASSY., Separator Jackshaft, 61/7130 Only |
| 10 | 87307489 | 1 | HUB CAP, Stationary, Rotor Drive, 61/7130 Only |
| 10 | 87481453 | 1 | HUB, Rotor Drive Variator, 5130 Only |
| 11 | 87602134 | 1 | PULLEY, Rotor Drive Fixed, 61/7130 Only |
| 11 | 87529708 | 1 | PULLEY ASSY., Rotor Drive Fixed, 5130 Only |
| 12 | 426-832 | 6 | BOLT, Hex, 1/2″-13 x 2″, G8PERNO SCHRAUBE VIS 140B |
| 13 | 492-21050 | 6 | LOCK WASHER, 1/2″ ARANDELA DE BLOQUEO SICHERUNGSSCHEIBE RONDELLE FREIN 132R |
| 14 | 429-108 | 6 | NUT, 1/2″-13, G8 TUERCA MUTTER ECROU 010D |
| 15 | 87307503 | 1 | PULLEY ASSY., Rotor Drive Variable, 61/7130 Only |
| 15 | 413164A1 | 1 | PULLEY, Rotor Drive Variable, 5130 Only |
| 16 | 219-86 | 1 | LUBE NIPPLE, 1/8″ x .62″ lg, Drive |
| 17 | 238-5230 | 2 | O-RING, -230, 70 Duro, 2.484″ ID x .139″ Thk, 61/7130 Only |
| 17 | 238-5226 | 2 | O-RING, -226, 70 Duro, 1.984″ ID x .139″ Thk, 5130 Only |
| 18 | 87307506 | 2 | BALL BEARING, 82.68 mm ID x 132.05 mm OD x 22.86 mm, 61/7130 Only |
| 18 | 278927A1 | 2 | THRUST BEARING, 5130 Only |
| 19 | 87307508 | 1 | SLEEVE, Variator Pulley, Female, 61/7130 Only |
| 19 | 194394C1 | 1 | HUB, Variator Pulley, Female, 5130 Only |
| 20 | 87307510 | 1 | COUPLING, Universal Joint, 61/7130 Only |
| 20 | 87733473 | 1 | COUPLING, Universal Joint, 5130 Only |
| 21 | 413-12176 | 1 | BOLT, Hex, 3/4″-10 x 11″, G5 |
| 22 | 87307512 | 1 | SLEEVE, Variator Pulley, Male, 61/7130 Only |
| 22 | 87678413 | 1 | SPROCKET, Variator Pulley, Male, 5130 Only |
| 23 | 425-1412 | 2 | NUT, Jam, 3/4″-10, G5 TUERCA MUTTER ECROU 010D |
| 24 | 87313981 | 8 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 25 | 87677098 | 1 | PULLEY ASSY., Hub Separator Driven |
| 26 | 87677105 | 1 | PULLEY ASSY., Separator Driven |
| 27 | 87301675 | 1 | WASHER, 1 3/8″ x 2 1/2″ x 1/4″, HDN |
| 28 | 231-41120 | 1 | LOCK NUT, 1 1/4″-7, GB TUERCA DE BLOQUEO SICHERUNGSMUTTER CONTRE-ECROU P263 |
| 29 | 496-21106 | 1 | WASHER, 1 1/16″ x 2″ x .209″, HDN |
| 30 | 232-41316 | 1 | LOCK NUT, 1″-8, GC TUERCA DE BLOQUEO SICHERUNGSMUTTER CONTRE-ECROU P263 |
| 31 | 86639326 | 5 | WASHER, M17.5 x 34 x 5, HT |
| 32 | 87016618 | 5 | LOCK WASHER, M16 ARANDELA DE BLOQUEO SICHERUNGSSCHEIBE RONDELLE FREIN 132R |
| 33 | 412398 | 5 | BOLT, Hex, M16 x 50, 10.9 PERNO SCHRAUBE VIS 140B |
| 34 | 84153801 | 1 | CHANNEL, Separator Jackshaft Support |
| 35 | 87393437 | 1 | SUPPORT, Separator Jackshaft, Right Hand |
| 36 | 87393438 | 1 | SUPPORT, Separator Jackshaft, Left Hand |
| 37 | 87757057 | 1 | SUPPORT, Separator Jackshaft |
| 38 | 87757061 | 1 | SUPPORT, Separator Jackshaft |
| 39 | 87393439 | 1 | SUPPORT, Separator Jackshaft Top |
| 40 | 87757085 | 1 | GUIDE, Auxiliary Shift Handle |
| 41 | 84185358 | 1 | BODY, Separator Belt Channel |
| 42 | 87331545 | 1 | ROD, Separator Belt Guide VARILLA STANGE TIGE 090A |
| 43 | 87030508 | 16 | BOLT, Hex Flg, M12 x 30, 10.9, Full Thd |
| 44 | 87695426 | 10 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 45 | 43260 | 2 | BOLT, Hex, M12 x 30, 10.9 PERNO SCHRAUBE VIS 140B |
| 46 | 86512497 | 12 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 47 | 87682391 | 3 | CARRIAGE BOLT, Short NK, M10 x 25, Cl 10.9 |
| 48 | 87698854 | 1 | NUT TUERCA MUTTER ECROU 010D |
| 1 | 86512497 | 4 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 4 | 1315251C1 | 1 | SUPPORT, Idler Pivot Assembly |
| 5 | 87695426 | 6 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 6 | 86592701 | 6 | WASHER, M12 x 35 x 5, HTARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 7 | 412123 | 6 | LOCK WASHER, M12 x 21 x 2.6 Thk |
| 8 | 337475 | 6 | NUT, M12, Cl 10 TUERCA MUTTER ECROU 010D |
| 9 | 87698836 | 6 | BOLT PERNO SCHRAUBE VIS 140B |
| 10 | 86050279 | 8 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 11 | 87695426 | 4 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 12 | 87698854 | 1 | NUT TUERCA MUTTER ECROU 010D |
| 13 | 84153801 | 1 | CHANNEL, Separator Jackshaft Support |
| 14 | 87393437 | 1 | SUPPORT, Separator Jackshaft, Right Hand |
| 15 | 87393438 | 1 | SUPPORT, Separator Jackshaft, Left Hand |
| 16 | 87757057 | 1 | SUPPORT, Separator Jackshaft Support |
| 17 | 87757061 | 1 | SUPPORT, Separator Jackshaft |
| 18 | 87393439 | 1 | SUPPORT, Separator Jackshaft Top |
| 19 | 87757085 | 1 | GUIDE, Auxiliary Shift Handle |
| 20 | 84185358 | 1 | BODY, Belt Guide Channel CUERPO KAROSSERIE CORPS 300C |
| 21 | 87331545 | 1 | ROD, Separator Belt Guide VARILLA STANGE TIGE 090A |
| 22 | 87030508 | 16 | BOLT, Hex Flg, M12 x 30, 10.9, Full Thd |
| 23 | 87695426 | 10 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 24 | 43260 | 2 | BOLT, Hex, M12 x 30, 10.9 PERNO SCHRAUBE VIS 140B |
| 25 | 86512497 | 12 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 26 | 87682391 | 3 | CARRIAGE BOLT, Short NK, M10 x 25, Cl 10.9 |
| 2 | 194336C2 | 1 | SUPPORT, Rotor Adjustment Motor, RH |
| 3 | 55825C1 | 1 | BUSHING CASQUILLO BUECHSE DOUILLE 1140 |
| 4 | 113485A1 | 2 | SPACER, Motor ESPACIADOR ABSTANDSSTUECK ENTRETOISE 8090 |
| 5 | 87693674 | 1 | ELECTRIC MOTOR, Fan And Rotor Speed |
| 6 | 87670760 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 7 | 87301498 | 2 | NUT TUERCA MUTTER ECROU 010D |
| 8 | 1545944C1 | 1 | SEAL SELLO/RETEN DICHTRING JOINT-D’ETANCHEITE 7460 |
| 9 | 87698836 | 4 | BOLT PERNO SCHRAUBE VIS 140B |
| 10 | 495-81135 | 4 | WASHER, 13/32″ x 1″ x .120″ |
| 11 | 86050279 | 4 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 12 | 617107R91 | 1 | CHAIN, Rotor Drive Variator |
| 13 | 1302173C1 | 2 | PAD, Motor Bracket CINTA ANTIDESLIZANTE ZWISCHENLAGE PLAQUE DE GARNISSAGE5980 |
| 14 | 87698838 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 15 | 87547587 | 2 | NUT TUERCA MUTTER ECROU 010D |
| 1 | 87364290 | 1 | SUPPORT ASSY. APOYADERO (CONJUNTO)STUETZE (KPLT.) SUPPORT (ASSEMBLE) P427 |
| 2 | 55826C1 | 2 | BUSHING CASQUILLO BUCHSE BAGUE 095B |
| 3 | 495-11066 | 10 | WASHER, 5/8″, SAE ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 4 | 87364294 | 1 | GEAR ENGRANAJE ZAHNRAD PIGNON 050I |
| 5 | 575098R1 | 1 | SPACER, 7/8″ Tube x 5/8″ SEPARADOR DISTANZSTÜCK ENTRETOISE 075D |
| 6 | 194337C1 | 1 | SPROCKET PIÑÓN KETTENRAD PIGNON 164R |
| 7 | Q5024 | 1 | KEY, 3/16″ Sq x 1″, Par LLAVE FEDERKEIL CLE 060L |
| 8 | 38-11020 | 1 | LOCK PIN, 5/32″ x 1 1/4″, Slotted |
| 9 | 485-12512 | 2 | SET SCREW, Sq Hd, 1/4″-20 x 3/4″ |
| 10 | 425-144 | 2 | NUT, Jam, 1/4″-20, G5 TUERCA MUTTER ECROU 010D |
| 1 | 87308245 | 1 | HUB CAP, Half Pulley, 6130/7130 |
| 1 | 184489C1 | 1 | HUB, Half Pulley, 5130 OnlyMAZA NABE MOYEU 4560 |
| 2 | 87373385 | 1 | PULLEY, Rotor Driven Fixed, 6130/7130 Only |
| 2 | 87369115 | 1 | PULLEY, Rotor Driven Fixed, 5130 only |
| 3 | 87308253 | 1 | PULLEY ASSY., Rotor Driven Variable, 6130/7130 Only |
| 3 | 450621A1 | 1 | PULLEY, Rotor Driven Variable, 5130 only |
| 4 | 87477369 | 3 | SEAL, 6130/7130 Only ANILLO DE CIERRE DICHTUNG JOINT 132A |
| 4 | 193965C92 | 3 | SEAL, 5130 Only SELLO/RETEN DICHTRING JOINT-D’ETANCHEITE 7460 |
| 5 | 87309921 | 1 | RING, 6130/7130 Only ANILLO RING ANNEAU 045A |
| 5 | 537602R1 | 1 | RING, 5130 Only ANILLO RING BAGUE 7175 |
| 6 | 87394078 | 2 | PACKAGE,SERVICE, Bushing, Variable Pulley, Incl 4, 6130/7130 Only |
| 6 | 87400246 | 2 | KIT, Bushing, Variable Pulley, Incl 4, 5130 Only |
| 7 | 219-87 | 1 | LUBE NIPPLE, 1/4″-28 x .56″ lg, Self-Tap |
| 8 | 87308254 | 1 | HUB CAP, Cam Follower, 6130/7130 Only |
| 8 | 411411A1 | 1 | HUB, Cam Follower, 5130 Only |
| 9 | 87554227 | 2 | CAM FOLLOWER, 15.9 mm ID x 38.04 mm OD x 19.05 mm, 6130/7130 Only |
| 9 | 86582880 | 2 | CAM FOLLOWER, 15.9 mm ID x 38.1 mm OD x 60.3 mm, 5130 only |
| 10 | 425-1110 | 2 | NUT, 5/8″-18, G5 TUERCA MUTTER ECROU 010D |
| 11 | 87310702 | 2 | WASHER, THRUST, 6130/7130 Only |
| 11 | 188210C91 | 1 | CAM FOLLOWER, 5130 only |
| 12 | 310-1824 | 12 | BOLT, Locking, 1/2″-13 x 1 1/2″, G8 |
| 13 | 87309922 | 1 | RING, 6130/7130 Only ANILLO RING ANNEAU 045A |
| 13 | 360171R1 | 1 | RING, 5130 Only ANILLO RING BAGUE 7175 |
| 14 | 87308257 | 1 | HUB CAP, Cam Rotor Drive, 6130/7130 Only |
| 14 | 411410A1 | 1 | HUB, Cam Rotor Drive, 5130 Only |
| 15 | 194167C1 | 2 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 16 | 87313007 | 1 | CAM, Torque Sensing (45 Degree), 6130/7130 Only |
| 16 | 87436839 | 1 | CAM, Torque Sensing (45 Degree), 5130 Only |
| 17 | 370255R2 | 1 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 9720 |
| 18 | 1315288C1 | 1 | NUT TUERCA MUTTER ECROU 5780 |
| 19 | 87308258 | 1 | COIL SPRING, Rotor Drive Torque Sensing, 6130/7130 Only |
| 19 | 413160A1 | 1 | SPRING, Rotor Drive Torque Sensing, 5130 Only |
| 20 | 86992943 | 1 | PLATE, Torque Sensing Unit Spring Compressor, 6130/7130 Only |
| 20 | 84128607 | 1 | PLATE, Torque Sensing Unit Spring Compressor, 5130 Only |
| 21 | 86992947 | 2 | ROD, Torque Sensing Spring |
| 22 | 495-11053 | 2 | WASHER, 1/2″, SAE ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 23 | 429-108 | 4 | NUT, 1/2″-13, G8 TUERCA MUTTER ECROU 010D |
| 1 | 87393443 | 1 | SUPPORT ASSY., Speed Adjustment Rotor Drive, Left Hand |
| 2 | 87393444 | 1 | SUPPORT ASSY., Rotor Speed Adjustment Motor, Left Hand |
| 3 | 362666R1 | 2 | CLIP, Wire Harness BROCHE SCHELLE COLLIER-CLIP 1700 |
| 4 | 87656137 | 26 | BOLT, Hex Flg, M8 x 20, 10.9, Full Thd |
| 5 | 86507066 | 26 | NUT, M8 x 1.25, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 6 | 87698835 | 77 | BOLT PERNO SCHRAUBE VIS 140B |
| 7 | 87698836 | 1 | BOLT PERNO SCHRAUBE VIS 140B |
| 8 | 86050279 | 78 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 9 | 191269C4 | 2 | SUPPORT, Rotor Cage, Rear |
| 10 | 87704305 | 1 | PANEL, Rotor Rear Upper PANEL PLATTE PANNEAU 025P |
| 11 | 182931C1 | 1 | SUPPORT, Rear Lower Cage |
| 12 | 84128710 | 1 | BRACKET, Rear Vertical Grain Tank, Right Hand |
| 13 | 1308696C1 | 1 | SUPPORT, Rear Upper Cage |
| 14 | 87668629 | 1 | SUPPORT ASSY., Rear Vertical, Grain Tank, Left Hand |
| 15 | 182893C1 | 2 | HINGE, Bottom BISAGRA SCHARNIER CHARNIERE 4260 |
| 16 | 182950C1 | 1 | SUPPORT, Cage Filler APOYADERO STUETZE SUPPORT 8790 |
| 17 | 182895C1 | 2 | FILLER, Rear LLENADO FÜLLSTÜCK MATERIAU DE REMPLISSAGE3220 |
| 18 | 84138793 | 2 | CLIP, Rocking Wrench ABRAZADERA KLAMMER COLLIER 045F |
| 19 | 86625074 | 5 | NUT TUERCA MUTTER ECROU 010D |
| 20 | 87704303 | 1 | PLATE, Rear Rotor Discharge |
| 21 | 193393C1 | 2 | SUPPORT, Discharge, SideAPOYADERO STUETZE SUPPORT 8790 |
| 22 | 87619898 | 1 | COVER, Rotor Gear Case 8 Bolt Coupler |
| 23 | 87757151 | 1 | ANGLE, Engine Deck Support, Front |
| 24 | 182949C2 | 1 | DEFLECTOR, Discharge, Right Hand |
| 25 | 182948C2 | 1 | DEFLECTOR, Discharge, Left Hand |
| 1 | 84171994 | 1 | HOUSING ASSY., Rotor Drive Gear Case |
| 2 | 84166878 | 1 | COVER, Rotor Drive Gear Case |
| 3 | 130503H | 1 | BEARING CUP CUBETA DEL COJINETE LAGERSCHALE CUVETTE DE ROULEMENT062A |
| 4 | 300426R91 | 1 | BEARING CONE, 45.618 mm ID x 25.4 mm |
| 5 | 29214H | 2 | BEARING CUP CUBETA DEL COJINETE LAGERSCHALE CUVETTE DE ROULEMENT062A |
| 6 | 80572270 | 2 | BEARING CONE CONO DE COJINETE LAGERKONUS CONE DE ROULEMENT 237C |
| 7 | 451231A2 | 1 | SHAFT, Rotor Drive Input EJE WELLE ARBRE 016A |
| 8 | 87326176 | 1 | TAPERED ROLLER BEARING, 50.8 mm ID x 63 mm OD x 25.4 mm |
| 9 | 114979H | 1 | BEARING CUP CUBETA DEL COJINETE LAGERSCHALE CUVETTE DE ROULEMENT062A |
| 10 | 96423C1 | 1 | NEEDLE BEARING, 1″ ID x 1.2505″ OD x 0.5″ |
| 11 | 238-5214 | 1 | O-RING, -214, 70 Duro, .984″ ID x .139″ Thk |
| 18 | T40066 | 1 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 9720 |
| 19 | G13609 | 1 | THRUST BEARING COJINETE DE EMPUJE DRUCKLAGER ROULEMENT DE BUTEE 342C |
| 20 | 87367599 | 1 | SHAFT, Rotor Drive Output EJE WELLE ARBRE 016A |
| 21 | 87330133 | 1 | GEAR, Low Driven, 61T ENGRANAJE ZAHNRAD PIGNON 050I |
| 22 | 87326186 | 1 | GEAR, Mid Driven, 51T ENGRANAJE ZAHNRAD PIGNON 050I |
| 23 | 451244A1 | 1 | SPLINED RING ANILLO RANURADO KEILRING ANNEAU CANNELE 057A |
| 24 | 87326187 | 1 | GEAR, High Driven, 43T ENGRANAJE ZAHNRAD PIGNON 050I |
| 25 | 451245A2 | 1 | THRUST WASHER ARANDELA DE EMPUJE DRUCKSCHEIBE ANNEAU DE BUTEE 023R |
| 26 | 235584A1 | 2 | BEARING, NEEDLE, 79.994 mm ID x 86.023 mm OD x 19.63 mm |
| 27 | 451255A1 | 1 | SPACER, Low Driven Gear Bearing |
| 28 | 235591A1 | 1 | BEARING, NEEDLE, 84.981 mm ID x 93.023 mm OD x 29.625 mm |
| 29 | 235594A1 | 1 | BEARING, NEEDLE, 74.994 mm ID x 83.023 mm OD x 29.625 mm |
| 30 | 235595A2 | 1 | THRUST WASHER ARANDELA DE EMPUJE DRUCKSCHEIBE ANNEAU DE BUTEE 023R |
| 31 | A27999 | 1 | NEEDLE BEARING, 0.7505″ ID x 1″ OD x 0.5″ |
| 32 | 396795R1 | 1 | THRUST WASHER ARANDELA DE EMPUJE DRUCKSCHEIBE ANNEAU DE BUTEE 023R |
| 33 | 324105R91 | 1 | THRUST BEARING COJINETE DE EMPUJE DRUCKLAGER ROULEMENT DE BUTEE 342C |
| 34 | 84173593 | 1 | CAM, Gear Shift, Rotor Gearbox |
| 35 | 194047C2 | 1 | BUSHING, Input Shaft CASQUILLO BUCHSE BAGUE 095B |
| 36 | 194051C1 | 2 | SEAL, Rotor Gear Case SELLO/RETEN DICHTRING JOINT-D’ETANCHEITE 7460 |
| 37 | 451251A1 | 2 | SHIFTER FORK HORQUILLA DE RIPADOR SCHALTGABEL FOURCHETTE Z116 |
| 40 | 38-21622 | 2 | PIN, 1/4″ x 1 3/8″, Coiled PASADOR PIN BROCHE 080P |
| 41 | 37-1420 | 2 | DOWEL, 1/4″ x 1 1/4″ BULÓN PASSSTIFT GOUJON 090G |
| 42 | 84178858 | 1 | RAIL ASSY., Low/Mid Gear, Incl 41 |
| 43 | 84178859 | 1 | RAIL ASSY., Hi Gear, Incl 41 |
| 44 | 236851A1 | 2 | ROLLER, Cam Rotor Drive RODILLO WALZE GALET 500R |
| 45 | 87491816 | 2 | COLLAR, Shift COLLAR RINGE COLLIER 031F |
| 46 | 84193697 | 1 | PIN, Switch Actuator PASADOR PIN BROCHE 080P |
| 47 | 87670320 | 1 | SPRING, Shift Detent MUELLE FEDER RESSORT 8315 |
| 48 | 167269 | 1 | O-RING, 0.755″ ID x 0.097″ Width |
| 49 | 84173594 | 1 | PLUG, Shift Pin TAPÓN STOPFEN BOUCHON 050T |
| 50 | 87326175 | 1 | PLUG, Vent, Includes Ref 52 |
| 51 | 219-434 | 1 | BREATHER, 1/8″-27 NPT, Short, w/washer, Vent |
| 52 | 237-6012 | 1 | O-RING, 0.364″ ID x 0.504″ OD x 0.07″ |
| 53 | 87402650 | 1 | ARM, Cam Shift Rotor Gearbox |
| 54 | 38-21622 | 1 | PIN, 1/4″ x 1 3/8″, Coiled PASADOR PIN BROCHE 080P |
| 55 | 129998 | 1 | PLUG, Hex Hd, 1/2″-20 ORBTAPÓN STOPFEN BOUCHON 050T |
| 56 | 828-12070 | 11 | BOLT, Hex, M12 x 70, 10.9 PERNO SCHRAUBE VIS 140B |
| 57 | 214389 | 1 | PLUG, Hex Hd, 3/4″-16 ORBTAPÓN STOPFEN BOUCHON 050T |
| 60 | 451241A2 | 1 | BRACKET, Shift Cable SOPORTE HALTERUNG SUPPORT 225S |
| 61 | 628-12025 | 2 | BOLT, Hex, M12 x 25, 10.9, Full Thd |
| 62 | 9840491 | 1 | MAGNET IMÁN MAGNET AIMANT 012M |
| 63 | 37-1816 | 2 | DOWEL, 1/2″ x 1″ BULÓN PASSSTIFT GOUJON 090G |
| 64 | 84152678 | 2 | SWITCH, Not Shown N.Closed, Ball-NO |
| 1 | 84548651 | 1 | BELT, Unload Mid Jackshaft, 2HB |
| 2 | 84255718 | 1 | SUPPORT SOPORTE STÜTZE SUPPORT 300S |
| 4 | 84342822 | 1 | LEVER, Aux Pump Drive PALANCA HEBEL LEVIER 045L |
| 5 | 219-90 | 1 | LUBE NIPPLE, 45º, 1/4″ NPT x .80″ lg, Drive |
| 6 | 192865C2 | 1 | PULLEY, Aux Drive Idler POLEA RIEMENSCHEIBE POULIE 230P |
| 7 | 274844R91 | 1 | BEARING, 15.313 mm ID x 30 mm OD x 33.9 mm |
| 8 | 84233788 | 1 | ROD VARILLA STANGE TIGE 090A |
| 9 | 86560521 | 1 | PIVOT PIVOTE DREHLAGER PIVOT 093A |
| 10 | 86624148 | 2 | WASHER, 17/32″ x 1 1/2″ x .179″ |
| 11 | 84375295 | 1 | TENSION SPRING RESORTE DE TENSIÓN SPANNFEDER RESSORT DE TENSION Z291 |
| 12 | 84375294 | 1 | SPACER SEPARADOR DISTANZSTÜCK ENTRETOISE 075D |
| 13 | 9706685 | 2 | NUT, M12, Cl 8 TUERCA MUTTER ECROU 010D |
| 14 | 84375293 | 1 | SPACER SEPARADOR DISTANZSTÜCK ENTRETOISE 075D |
| 15 | 86624171 | 4 | WASHER, 1 1/32″ x 1 3/4″ x .060″ |
| 16 | 432-1624 | 1 | COTTER PIN, 1/4″ x 1 1/2″ PASADOR SPLINT GOUPILLE FENDUE 270C |
| 17 | 87364 | 1 | WASHER, 1/2″, SAE ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 18 | 432-1216 | 1 | COTTER PIN, 3/16″ x 1″ PASADOR SPLINT GOUPILLE FENDUE 270C |
| 19 | 87698835 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 20 | 84154327 | 1 | SUPPORT SOPORTE STÜTZE SUPPORT 300S |
| 21 | 87695426 | 10 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 22 | 87495307 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 23 | 86512497 | 12 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 1 | 84153804 | 1 | SUPPORT SOPORTE STÜTZE SUPPORT 300S |
| 2 | 86620027 | 4 | FLANGE BRIDA FLANSCH BRIDE 070F |
| 3 | 455805 | 2 | BALL BEARING, 40 mm ID x 80 mm OD x 42.9 mm |
| 4 | 84152427 | 1 | HALF SHAFT SEMIEJE HALBWELLE DEMI-ARBRE 092S |
| 5 | 354775 | 2 | KEY, M10 x 8 x 40, Par LLAVE FEDERKEIL CLE 060L |
| 6 | 84152415 | 1 | PULLEY, Driven POLEA RIEMENSCHEIBE POULIE 230P |
| 7 | 87016608 | 2 | WASHER, M24 x 44.5 x 5, HT |
| 8 | 86536986 | 2 | LOCK NUT, M24 x 3, Cl 10 TUERCA DE BLOQUEO SICHERUNGSMUTTER CONTRE-ECROU P263 |
| 9 | 84194297 | 1 | PULLEY, Driven 5130 POLEA RIEMENSCHEIBE POULIE 230P |
| 10 | 87695427 | 8 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 11 | 86512497 | 8 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 12 | 84154356 | 1 | SUPPORT SOPORTE STÜTZE SUPPORT 300S |
| 13 | 87682391 | 6 | CARRIAGE BOLT, Short NK, M10 x 25, Cl 10.9 |
| 14 | 86050279 | 6 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 2 | 86978772 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 3 | 87317689 | 4 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 4 | 86595832 | 6 | CARRIAGE BOLT, Short NK, M16 x 40, Cl8.8, Full Thd |
| 5 | 87016581 | 2 | LOCK NUT, M16 x 2, Flg, Cl 10 |
| 6 | 86512498 | 6 | NUT, M16 x 2, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 8 | 84194650 | 1 | V-BELT, 2802.57 mm L, Rotor Drive, 5130 Only |
| 8 | 87615553 | 1 | V-BELT, 76.20 mm W x 2790.00 mm L, Rotor Drive, 6130/7130 Only |
| 10 | 87698836 | 6 | BOLT PERNO SCHRAUBE VIS 140B |
| 11 | 495-81135 | 4 | WASHER, 13/32″ x 1″ x .120″ |
| 12 | 86050279 | 6 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 14 | 87519770 | 1 | IDLER LEVER, Rocking Wrench |
| 15 | 1979751C2 | 1 | BAR, Rotor Rocker BARRA STAB BARRE 0500 |
| 16 | 87698839 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 17 | 87547587 | 2 | NUT TUERCA MUTTER ECROU 010D |
| 1 | 84343144 | 1 | SEPARATOR HOOD, Side, Right Hand |
| 2 | 87357472 | 1 | PLATE, Spacer PLACA PLATTE PLAQUE 105P |
| 3 | 87545055 | 1 | STRAP, Main Sill Flange BANDA BAND BRIDE 532B |
| 4 | 84511585 | 1 | POST, Front Right Hand POSTE SÄULE COLONNE 6480 |
| 5 | 87388469 | 1 | DOOR ASSY., Right Front PUERTA (CONJUNTO) TUER (KPLT.) PORTE (ASSEMBLEE) P519 |
| 6 | 84126991 | 1 | BRACKET, Front Post To Side Sheet |
| 7 | 84332197 | 1 | BRACKET, Rear Main, Right Hand |
| 8 | 87499098 | 1 | BRACKET, Main, Right Hand |
| 9 | 87679652 | 1 | BRACKET, Right Hand Sill SOPORTE HALTERUNG SUPPORT 225S |
| 10 | 87735697 | 1 | LATCH, Door PESTILLO VERRIEGELUNG LOQUET 156C |
| 11 | 86991204 | 2 | LATCH, Rotor Access Door PESTILLO VERRIEGELUNG LOQUET 156C |
| 12 | 87030508 | 10 | BOLT, Hex Flg, M12 x 30, 10.9, Full Thd |
| 13 | 87656137 | 5 | BOLT, Hex Flg, M8 x 20, 10.9, Full Thd |
| 14 | 86507066 | 5 | NUT, M8 x 1.25, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 15 | 86978772 | 12 | BOLT PERNO SCHRAUBE VIS 140B |
| 16 | 86512498 | 12 | NUT, M16 x 2, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 17 | 86625256 | 11 | WASHER, M12 x 28.5 x 4, HT |
| 18 | 87695413 | 22 | BOLT PERNO SCHRAUBE VIS 140B |
| 19 | 86512497 | 32 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 20 | 87478648 | 1 | STRAP, Front Post BANDA BAND BRIDE 532B |
| 21 | 86991662 | 1 | SEAL SELLO/RETEN DICHTRING JOINT-D’ETANCHEITE 7460 |
| 22 | 353-414 | 1 | PLUG, Dome, 1.375″ hole, Nylon |
| 23 | 87698836 | 4 | BOLT PERNO SCHRAUBE VIS 140B |
| 24 | 86050279 | 4 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 25 | 87682391 | 3 | CARRIAGE BOLT, Short NK, M10 x 25, Cl 10.9 |
| 26 | 87698854 | 3 | NUT TUERCA MUTTER ECROU 010D |
| 27 | 87473326 | 1 | SPLASH SHIELD, Cleaning, Right Hand |
| 1 | 84343137 | 1 | SEPARATOR HOOD, Separator Side LH |
| 2 | 84332194 | 1 | BRACKET, Sill Main L H SOPORTE HALTERUNG SUPPORT 225S |
| 3 | 84511580 | 1 | POST, Front Left POSTE SÄULE COLONNE 6480 |
| 4 | 84201886 | 1 | DOOR, Separator Side LH PUERTA TÜR PORTE 180P |
| 5 | 84201873 | 1 | SUPPORT, Mid Center Left SOPORTE STÜTZE SUPPORT 300S |
| 6 | 87745644 | 1 | DOOR PUERTA TÜR PORTE 180P |
| 7 | 87357472 | 1 | PLATE PLACA PLATTE PLAQUE 105P |
| 8 | 87545055 | 1 | STRAP, Main Sill Flange BANDA BAND BRIDE 532B |
| 9 | 87478648 | 1 | STRAP, Front Post BANDA BAND BRIDE 532B |
| 10 | 87701707 | 1 | PLATE ASSY., To Separator |
| 11 | 87735697 | 2 | LATCH PESTILLO VERRIEGELUNG LOQUET 156C |
| 12 | 87656137 | 5 | BOLT, Hex Flg, M8 x 20, 10.9, Full Thd |
| 13 | 86507066 | 6 | NUT, M8 x 1.25, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 14 | 86978772 | 12 | BOLT PERNO SCHRAUBE VIS 140B |
| 15 | 86512498 | 12 | NUT, M16 x 2, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 16 | 87695413 | 25 | BOLT PERNO SCHRAUBE VIS 140B |
| 17 | 86512497 | 25 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 18 | 86625256 | 10 | WASHER, M12 x 28.5 x 4, HT |
| 19 | 847-3830 | 1 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 20 | 83918746 | 3 | WASHER, 5/16″, .354″ x .688″ x .08″ Thk |
| 21 | 431114A1 | 1 | BRACKET, Cleanout Access Door |
| 22 | 87681210 | 1 | FLANGE NUT, Hex, M8, Cl 10 |
| 23 | 188062C2 | 2 | SEAL SELLO/RETEN DICHTRING JOINT-D’ETANCHEITE 7460 |
| 25 | 87682394 | 6 | BOLT PERNO SCHRAUBE VIS 140B |
| 27 | 87682391 | 1 | CARRIAGE BOLT, Short NK, M10 x 25, Cl 10.9 |
| 28 | 87698854 | 7 | NUT TUERCA MUTTER ECROU 010D |
| 29 | 87613189 | 2 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 30 | 87682383 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 31 | 131-440 | 2 | NUT TUERCA MUTTER ECROU 010D |
| 32 | 87695418 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 33 | 86050300 | 2 | NUT, M6 x 1, Flg, Cl10 TUERCA MUTTER ECROU 010D |
| 1 | 87384924 | 1 | DOOR, NA ONLY PUERTA TÜR PORTE 180P |
| 2 | 87388259 | 1 | SEAL ANILLO DE CIERRE DICHTUNG JOINT 132A |
| 3 | 397586A1 | 1 | HINGE BISAGRA SCHARNIER CHARNIERE 4260 |
| 4 | 87698753 | 4 | BOLT PERNO SCHRAUBE VIS 140B |
| 5 | 86050300 | 4 | NUT, M6 x 1, Flg, Cl10 TUERCA MUTTER ECROU 010D |
| 6 | 87728436 | 1 | LATCH, LATCH, EU ONLY (Picture Shown) |
| 3 | 86508583 | 4 | BOLT, Hex, M16 x 35, 8.8 PERNO SCHRAUBE VIS 140B |
| 4 | 1327676C1 | 2 | BAR, Helical Kicker BARRA BAR BARRE 530B |
| 5 | 1318976C2 | 4 | BAR, Straight Separator BARRA STAB BARRE 0500 |
| 6 | 84164540 | 66 | RASP BAR, W/O Spike, Modular Iron |
| 7 | 86981487 | 78 | BOLT, Hex Flg, M12 x 35, 10.9, Full Thd |
| 8 | 410668A3 | 2 | IMPELLER, AFX Rotor InletIMPULSOR TURBINENRAD ROUE A AUBES Z272 |
| 9 | 326-820 | 4 | BOLT, Hex, 1/2″-13 x 1 1/4″, G8, Full Thd |
| 10 | 326-824 | 12 | BOLT, Hex, 1/2″-13 x 1 1/2″, G8, Full Thd |
| 11 | 396-41053 | 20 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN |
| 12 | 199528A1 | 16 | NUT TUERCA MUTTER ECROU 5780 |
| 13 | 84162517 | 2 | EXTENSION, Inlet Flight EXTENSION SCHURRE EXTENSION P416 |
| 14 | 84162516 | 2 | EXTENSION, Intermediate EXTENSION SCHURRE EXTENSION P416 |
| 15 | 412672 | 8 | LOCK NUT, M12 x 1.75, Cl 10 |
| 16 | 87314103 | 8 | PLOW BOLT PERNO DE ARADO PFLUGSCHRAUBE BOULON DE CHARRUE P128 |
| 17 | 87619363 | 1 | PLATE, Rotor Load Ring, 8 Bolt |
| 18 | 87619364 | 1 | COUPLING, HD Rotor Drive, 23 Tooth |
| 19 | 86639326 | 16 | WASHER, M17.5 x 34 x 5, HT |
| 20 | 87550181 | 8 | BOLT PERNO SCHRAUBE VIS 140B |
| 3 | 86508583 | 4 | BOLT, Hex, M16 x 35, 8.8 PERNO SCHRAUBE VIS 140B |
| 4 | 1327676C1 | 2 | BAR, Helical Kicker BARRA BAR BARRE 530B |
| 5 | 1318976C2 | 4 | BAR, Straight Separator BARRA STAB BARRE 0500 |
| 6 | 84164540 | 66 | RASP BAR, W/O Spike, Modular Iron |
| 7 | 86981487 | 78 | BOLT, Hex Flg, M12 x 35, 10.9, Full Thd |
| 8 | 410668A3 | 2 | IMPELLER, AFX Rotor InletIMPULSOR TURBINENRAD ROUE A AUBES Z272 |
| 9 | 326-820 | 4 | BOLT, Hex, 1/2″-13 x 1 1/4″, G8, Full Thd |
| 10 | 326-824 | 12 | BOLT, Hex, 1/2″-13 x 1 1/2″, G8, Full Thd |
| 11 | 396-41053 | 20 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN |
| 12 | 199528A1 | 16 | NUT TUERCA MUTTER ECROU 5780 |
| 13 | 84162517 | 2 | EXTENSION, Inlet Flight EXTENSION SCHURRE EXTENSION P416 |
| 14 | 84162516 | 2 | EXTENSION, Intermediate EXTENSION SCHURRE EXTENSION P416 |
| 15 | 412672 | 8 | LOCK NUT, M12 x 1.75, Cl 10 |
| 16 | 87314103 | 8 | PLOW BOLT PERNO DE ARADO PFLUGSCHRAUBE BOULON DE CHARRUE P128 |
| 17 | 87619363 | 1 | PLATE, Rotor Load Ring, 8 Bolt |
| 18 | 87619364 | 1 | COUPLING, HD Rotor Drive, 23 Tooth |
| 19 | 86639326 | 16 | WASHER, M17.5 x 34 x 5, HT |
| 20 | 87550181 | 8 | BOLT PERNO SCHRAUBE VIS 140B |
| 21 | 87416663 | 1 | PLATE, Anti-Wind Extension, AFX Rotor |
| 22 | 396-41053 | 2 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN |
| 23 | 337563 | 2 | BOLT, Hex, M12 x 40, 10.9, Full Thd |
| 24 | 87377347 | 1 | PACKAGE, Anti Wind, Includes Ref 10,11,21,22,23 |
| 3 | 86508583 | 4 | BOLT, Hex, M16 x 35, 8.8 PERNO SCHRAUBE VIS 140B |
| 4 | 86992048 | 2 | BAR, RFC, Helical Kicker, Carbide Iron |
| 5 | 86992047 | 4 | BAR, Straight Separator bar, Carbide Iron |
| 6 | 278821A3 | 66 | RASP BAR, W/O Spike, Extended Wear |
| 7 | 86981487 | 78 | BOLT, Hex Flg, M12 x 35, 10.9, Full Thd |
| 8 | 410668A3 | 2 | IMPELLER, Flighting IMPULSOR TURBINENRAD ROUE A AUBES Z272 |
| 9 | 326-820 | 4 | BOLT, Hex, 1/2″-13 x 1 1/4″, G8, Full Thd |
| 10 | 326-824 | 12 | BOLT, Hex, 1/2″-13 x 1 1/2″, G8, Full Thd |
| 11 | 396-41053 | 20 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN |
| 12 | 199528A1 | 16 | NUT TUERCA MUTTER ECROU 5780 |
| 13 | 84162517 | 2 | EXTENSION, Plate, Inlet Flighting |
| 14 | 84162516 | 2 | EXTENSION, Plate, Intermediate |
| 15 | 412672 | 8 | LOCK NUT, M12 x 1.75, Cl 10 |
| 16 | 87314103 | 8 | PLOW BOLT PERNO DE ARADO PFLUGSCHRAUBE BOULON DE CHARRUE P128 |
| 17 | 87619363 | 1 | PLATE, Rotor Load Ring 8 Bolt |
| 18 | 87619364 | 1 | COUPLING, HD Rotor Drive 23 Tooth |
| 19 | 86639326 | 16 | WASHER, M17.5 x 34 x 5, HT |
| 20 | 87550181 | 8 | BOLT PERNO SCHRAUBE VIS 140B |
| 3 | 86508583 | 4 | BOLT, Hex, M16 x 35, 8.8 PERNO SCHRAUBE VIS 140B |
| 4 | 1327676C1 | 2 | BAR, Helical Kicker BARRA BAR BARRE 530B |
| 5 | 1318976C2 | 8 | BAR, Straight bar SeparatorBARRA STAB BARRE 0500 |
| 6 | 84164540 | 58 | RASP BAR, W/O Spike, Nodular Iron |
| 7 | 86981487 | 78 | BOLT, Hex Flg, M12 x 35, 10.9, Full Thd |
| 8 | 410668A3 | 2 | IMPELLER, Inlet Flighting IMPULSOR TURBINENRAD ROUE A AUBES Z272 |
| 9 | 326-820 | 4 | BOLT, Hex, 1/2″-13 x 1 1/4″, G8, Full Thd |
| 10 | 326-824 | 12 | BOLT, Hex, 1/2″-13 x 1 1/2″, G8, Full Thd |
| 11 | 396-41053 | 20 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN |
| 12 | 199528A1 | 16 | NUT TUERCA MUTTER ECROU 5780 |
| 13 | 84162516 | 2 | EXTENSION, Intermediate EXTENSION SCHURRE EXTENSION P416 |
| 14 | 84162517 | 2 | EXTENSION, Inlet FlightingEXTENSION SCHURRE EXTENSION P416 |
| 15 | 412672 | 8 | LOCK NUT, M12 x 1.75, Cl 10 |
| 16 | 87314103 | 8 | PLOW BOLT PERNO DE ARADO PFLUGSCHRAUBE BOULON DE CHARRUE P128 |
| 17 | 87619363 | 1 | PLATE, Rotor Load Ring- 8 Bolt |
| 18 | 87619364 | 1 | COUPLING, HD Rotor Drive 23 Tooth |
| 19 | 86639326 | 16 | WASHER, M17.5 x 34 x 5, HT |
| 20 | 87550181 | 8 | BOLT PERNO SCHRAUBE VIS 140B |
| 2 | 87544176 | 2 | STEEL FLIGHT, Rear Kicker |
| 3 | 84317777 | 40 | RASP BAR, Small Tube, Extended Wear, 10 Degree Non- Spike |
| 4 | 84317775 | 10 | RASP BAR, Extended Wear W/Spike, 10 Degree |
| 5 | 87602594 | 10 | RASP BAR, Straight Bar BARRA DESBARBADORA ENTGRANNERLEISTE BATTE 089A |
| 6 | 86981487 | 60 | BOLT, Hex Flg, M12 x 35, 10.9, Full Thd |
| 7 | 87532511 | 2 | IMPELLER, Rotor Inlet IMPULSOR LAUFRAD ROUE A AILETTES 060G |
| 8 | 337563 | 10 | BOLT, Hex, M12 x 40, 10.9, Full Thd |
| 9 | 9824642 | 4 | BOLT, Hex, M12 x 35, 10.9 PERNO SCHRAUBE VIS 140B |
| 10 | 86592701 | 10 | WASHER, M12 x 35 x 5, HTARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 11 | 412672 | 20 | LOCK NUT, M12 x 1.75, Cl 10 |
| 12 | 87314103 | 6 | PLOW BOLT PERNO DE ARADO PFLUGSCHRAUBE BOULON DE CHARRUE P128 |
| 14 | 86508583 | 4 | BOLT, Hex, M16 x 35, 8.8 PERNO SCHRAUBE VIS 140B |
| 15 | 87619363 | 1 | PLATE, Rotor Load Ring 8 Bolt |
| 16 | 87619364 | 1 | COUPLING, HD Rotor Drive 23 Tooth |
| 17 | 86639326 | 16 | WASHER, M17.5 x 34 x 5, HT |
| 18 | 87550181 | 8 | BOLT PERNO SCHRAUBE VIS 140B |
| 2 | 87544176 | 2 | STEEL FLIGHT, Rear Kicker |
| 3 | 84317777 | 50 | RASP BAR, Small Tube, Extended Wear, 10 Degree Non- Spike |
| 4 | 84317775 | 10 | RASP BAR, Extended Wear W/ Spike, 10 Degree |
| 5 | 86981487 | 60 | BOLT, Hex Flg, M12 x 35, 10.9, Full Thd |
| 6 | 87532511 | 2 | IMPELLER, Rotor Inlet IMPULSOR LAUFRAD ROUE A AILETTES 060G |
| 7 | 337563 | 10 | BOLT, Hex, M12 x 40, 10.9, Full Thd |
| 8 | 9824642 | 4 | BOLT, Hex, M12 x 35, 10.9 PERNO SCHRAUBE VIS 140B |
| 9 | 86592701 | 10 | WASHER, M12 x 35 x 5, HTARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 10 | 412672 | 20 | LOCK NUT, M12 x 1.75, Cl 10 |
| 11 | 87314103 | 6 | PLOW BOLT PERNO DE ARADO PFLUGSCHRAUBE BOULON DE CHARRUE P128 |
| 13 | 86508583 | 4 | BOLT, Hex, M16 x 35, 8.8 PERNO SCHRAUBE VIS 140B |
| 14 | 87619363 | 1 | PLATE, Rotor Load Ring 8 Bolt |
| 15 | 87619364 | 1 | COUPLING, HD Rotor Drive 23 Tooth |
| 16 | 86639326 | 16 | WASHER, M17.5 x 34 x 5, HT |
| 17 | 87550181 | 8 | BOLT PERNO SCHRAUBE VIS 140B |
| 2 | 87544176 | 2 | STEEL FLIGHT, Rear Kicker |
| 3 | 84317775 | 60 | RASP BAR, Extended Ear, W/ Spike, 10 Degree |
| 4 | 86981487 | 60 | BOLT, Hex Flg, M12 x 35, 10.9, Full Thd |
| 5 | 87532511 | 2 | IMPELLER, Rotor inlet IMPULSOR LAUFRAD ROUE A AILETTES 060G |
| 6 | 337563 | 10 | BOLT, Hex, M12 x 40, 10.9, Full Thd |
| 7 | 9824642 | 4 | BOLT, Hex, M12 x 35, 10.9 PERNO SCHRAUBE VIS 140B |
| 8 | 86592701 | 10 | WASHER, M12 x 35 x 5, HTARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 9 | 412672 | 20 | LOCK NUT, M12 x 1.75, Cl 10 |
| 10 | 87314103 | 6 | PLOW BOLT PERNO DE ARADO PFLUGSCHRAUBE BOULON DE CHARRUE P128 |
| 12 | 86508583 | 4 | BOLT, Hex, M16 x 35, 8.8 PERNO SCHRAUBE VIS 140B |
| 13 | 87619363 | 1 | PLATE, Rotor Load Ring 8 Bolt |
| 14 | 87619364 | 1 | COUPLING, HD Rotor Drive 23 Tooth |
| 15 | 86639326 | 16 | WASHER, M17.5 x 34 x 5, HT |
| 16 | 87550181 | 8 | BOLT PERNO SCHRAUBE VIS 140B |
| 1 | 87613390 | 1 | SUPPORT ASSY., Front Rotor, Extended Wear |
| 2 | 87680031 | 1 | THRUST BEARING, Rotor Front Bearing |
| 3 | 87648025 | 1 | SUPPORT, Rotor Speed Sensor |
| 4 | 87698833 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 5 | 86507066 | 4 | NUT, M8 x 1.25, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 6 | 374835 | 3 | BOLT, Hex, M16 x 40, 10.9 PERNO SCHRAUBE VIS 140B |
| 7 | 86639326 | 3 | WASHER, M17.5 x 34 x 5, HT |
| 8 | 86512498 | 3 | NUT, M16 x 2, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 9 | 86705431 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 10 | 86625256 | 2 | WASHER, M12 x 28.5 x 4, HT |
| 11 | 86512497 | 2 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 13 | 86590413 | 4 | BASE BASE SOCKEL BASE 021B |
| 14 | 445395 | 4 | RIVET, Pop, M4.8 x 18.1 REMACHE NIET RIVET 055R |
| 15 | 86566989 | 4 | CABLE STRAP, M4.75 x 190.5 L |
| 16 | 87681895 | 1 | BRACKET, SUPPORTING, RPM Sensor |
| 17 | 70330C1 | 1 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 9720 |
| 18 | 492-11075 | 1 | LOCK WASHER, 3/4″ ARANDELA DE BLOQUEO SICHERUNGSSCHEIBE RONDELLE FREIN 132R |
| 19 | 424-1228 | 1 | BOLT, Hex, 3/4″-10 x 1 3/4″, G2 |
| 20 | 833-40310 | 3 | NUT, M10, U TUERCA MUTTER ECROU 010D |
| 21 | 87030508 | 7 | BOLT, Hex Flg, M12 x 30, 10.9, Full Thd |
| 22 | 86512497 | 7 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 1 | 87613390 | 1 | SUPPORT ASSY., Front Rotor, Extended Wear |
| 2 | 87680031 | 1 | THRUST BEARING, Rotor Front Bearing |
| 3 | 87648025 | 1 | SUPPORT, Rotor Speed Sensor |
| 4 | 87698833 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 5 | 86507066 | 4 | NUT, M8 x 1.25, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 6 | 374835 | 3 | BOLT, Hex, M16 x 40, 10.9 PERNO SCHRAUBE VIS 140B |
| 7 | 86639326 | 3 | WASHER, M17.5 x 34 x 5, HT |
| 8 | 86512498 | 3 | NUT, M16 x 2, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 9 | 86705431 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 10 | 86625256 | 2 | WASHER, M12 x 28.5 x 4, HT |
| 11 | 86512497 | 2 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 13 | 86590413 | 4 | BASE BASE SOCKEL BASE 021B |
| 14 | 445395 | 4 | RIVET, Pop, M4.8 x 18.1 REMACHE NIET RIVET 055R |
| 15 | 86566989 | 4 | CABLE STRAP, M4.75 x 190.5 L |
| 16 | 87681895 | 1 | BRACKET, SUPPORTING, RPM Sensor |
| 17 | 86998693 | 1 | WASHER ARANDELA UNTERLEGSCHEIBE RONDELLE 131R |
| 18 | 86639326 | 1 | WASHER, M17.5 x 34 x 5, HT |
| 19 | 140048 | 1 | BELLEVILLE WASHER, M16 |
| 20 | 412398 | 1 | BOLT, Hex, M16 x 50, 10.9 PERNO SCHRAUBE VIS 140B |
| 21 | 833-40310 | 3 | NUT, M10, U TUERCA MUTTER ECROU 010D |
| 22 | 87030508 | 7 | BOLT, Hex Flg, M12 x 30, 10.9, Full Thd |
| 23 | 86512497 | 7 | NUT, M12 x 1.75, Flg, Cl 10TUERCA MUTTER ECROU 010D |
| 1 | 87753814 | 2 | SHEET, Chopper Beater Filler |
| 2 | 117051A1 | 1 | HUB, Beater Fixed CUBO NABE MOYEU 135M |
| 3 | 182948C2 | 1 | DEFLECTOR, Discharge, Left Hand |
| 4 | 182949C2 | 1 | DEFLECTOR, Discharge, Right Hand |
| 5 | 182980C1 | 1 | ROD, Hinge VARILLA STANGE TRINGLE 7250 |
| 6 | 87476487 | 1 | V-BELT, 22.33 mm W x 6502.40 mm L, Cleaning System Drive With Beater |
| 7 | 87301277 | 1 | BOLT PERNO SCHRAUBE VIS 140B |
| 8 | 87681209 | 1 | NUT TUERCA MUTTER ECROU 010D |
| 9 | 495-81211 | 6 | WASHER, 1 11/32″ x 2″ x .120″ |
| 10 | 632147R1 | 1 | SPACER, Auger Drive ESPACIADOR ABSTANDSSTUECK ENTRETOISE 8090 |
| 11 | 87698840 | 1 | BOLT PERNO SCHRAUBE VIS 140B |
| 12 | 87547587 | 9 | NUT TUERCA MUTTER ECROU 010D |
| 13 | 87656137 | 14 | BOLT, Hex Flg, M8 x 20, 10.9, Full Thd |
| 14 | 86507066 | 14 | NUT, M8 x 1.25, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 15 | 87752814 | 1 | PULLEY, Beater POLEA RIEMENSCHEIBE POULIE 230P |
| 16 | 1319402C1 | 1 | HUB, Beater MAZA NABE MOYEU 4560 |
| 17 | 87698833 | 4 | BOLT PERNO SCHRAUBE VIS 140B |
| 18 | 87681210 | 4 | FLANGE NUT, Hex, M8, Cl 10 |
| 19 | 87752640 | 1 | SUPPORT ASSY., Beater, Left Hand |
| 20 | 87752641 | 1 | SUPPORT ASSY., Beater, Right Hand |
| 21 | 182896C2 | 2 | SUPPORT, Beater Bottom APOYADERO STUETZE SUPPORT 8790 |
| 22 | 495-81162 | 4 | WASHER, 17/32″ x 1 1/2″ x .179″ |
| 23 | 182981C1 | 2 | SPACER, Spreader Drive SEPARADOR DISTANZSTÜCK ENTRETOISE 075D |
| 24 | 391745R1 | 2 | SPRING, Spreader Drive MUELLE FEDER RESSORT 8315 |
| 25 | 182892C2 | 2 | BOLT, Tension TORNILLO SCHRAUBE BOULON 0810 |
| 26 | 425-108 | 4 | TUBE NUT, 1/2″-13, G5 TUERCA DE TUBO ROHRMUTTER ECROU DE TUYAU 0030 |
| 27 | 86620026 | 4 | FLANGED BEARING COJINETE CON BRIDA FLANSCHLAGER PALIER A BRIDE C006 |
| 28 | 87376564 | 2 | BEARING, 28.7 mm ID x 72 mm OD x 25 mm, Shaker Shaft |
| 29 | 439-1828 | 2 | HEADED PIN, 1/2″ x 1 3/4″ PASADOR CON CABEZA KOPFZAPFEN GOUPILLE A TETE P888 |
| 30 | 432-1216 | 2 | COTTER PIN, 3/16″ x 1″ PASADOR SPLINT GOUPILLE FENDUE 270C |
| 31 | 87698836 | 16 | BOLT PERNO SCHRAUBE VIS 140B |
| 32 | 87698837 | 2 | BOLT PERNO SCHRAUBE VIS 140B |
| 33 | 496-41041 | 2 | WASHER, 13/32″ x 1 1/8″ x .134″ |
| 34 | 86050279 | 16 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 35 | 87746097 | 1 | CONCAVE, Spring Loaded Beater |
| 36 | 87746099 | 1 | COVER, Spring Loaded Beater |
| 37 | 87656137 | 6 | BOLT, Hex Flg, M8 x 20, 10.9, Full Thd |
| 38 | 825-5148 | 12 | NUT, M8, Flg Ser TUERCA MUTTER ECROU 010D |
| 39 | 847-3820 | 6 | SCREW, Sltd Tr Hd, M8 x 20, 10.9, Serr |
| 40 | 1319270C1 | 3 | BLADE, Beater CUCHILLA KLINGE LAME 0700 |
| 41 | 1319266C1 | 2 | HUB, Beater CUBO NABE MOYEU 135M |
| 42 | 87573369 | 30 | SCREW TORNILLO SCHRAUBE VIS 040V |
| 43 | 86050279 | 30 | NUT, M10 x 1.5, Flg, Cl 10 TUERCA MUTTER ECROU 010D |
| 44 | 1302176C2 | 1 | SHAFT ARBOL WELLE ARBRE 7590 |
| 45 | 87397583 | 1 | SENSOR, Shaft, Low SpeedSENSOR SENSOR CAPTEUR 608S |
| 1 | 84180972 | 1 | SUPPORT SOPORTE STÜTZE SUPPORT 300S |
| 2 | 87301087 | 1 | BRACKET SOPORTE HALTERUNG SUPPORT 225S |
| 3 | 84180970 | 2 | SUPPORT APOYADERO STUETZE SUPPORT 8790 |
| 4 | 84136824 | 1 | BRACKET SOPORTE HALTERUNG SUPPORT 225S |
| 5 | 1318900C1 | 1 | SUPPORT APOYADERO STUETZE SUPPORT 8790 |
| 6 | 186797C2 | 1 | SUPPORT APOYADERO STUETZE SUPPORT 8790 |
| 7 | 185386C1 | 1 | SUPPORT SOPORTE STÜTZE SUPPORT 300S |
| 8 | 183323C1 | 1 | STRAP BANDA BAND BRIDE 532B |
| 9 | 186785C2 | 1 | REINFORCEMENT REFUERZO VERSTÄRKUNG RENFORT 060R |
| 11 | 84161945 | 1 | STIFFENER |