Kinze 3600
Kinze 3600 — parts list, part 1 of 3
1,818 part numbers across 92 assemblies, transcribed from the catalogue above and split over 3 pages. Search a page for a part number to find the assembly it belongs to; the page links are below the list.
SHANK ASSEMBLY, SEED TUBE AND
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G11015 | 2 | Hex Washer Head Cap Screw, ⅜”-16 x 1 ¼” |
| 2 | GB0274 | 1 | Cover, Depth Adjustment |
| 3 | GB0266 | 1 | Handle, Depth Adjustment |
| 4 | GB0267 | 1 | Lever, Depth Adjustment |
| 5 | GD3612 | 1 | Cap Plug |
| 6 | GD10993 | 1 | Spring |
| 7 | GD13361 | 1 | Pin, ⅜” x 1 ⅔” |
| 8 | GD11259 | 1 | Sleeve, ⅜” I.D. x ⅝” O.D. x 1 25∕32″ Long |
| 9 | G11008 | 1 | Hex Head Cap Screw, ⅜”-24 x 2 ½”, Grade 8 |
| 9 | G11007 | 1 | Lock Nut, ⅜”-24, Grade C |
| 10 | G3303-108 | 1 | Chain, No. 41, 108 Pitch Including Connector Link |
| 10 | G3303-16 | 1 | Chain, No. 41, 16 Pitch Including Connector Link |
| 10 | GR0196 | 1 | Connector Link, No. 41 |
| 11 | GD1026 | 1 | Sleeve, 1 3∕16″ Long |
| 12 | G10201 | 1 | Special Washer, ⅜” x 1 ½” O.D. |
| 13 | GD1065 | 1 | Idler Spring |
| 14 | GD7318 | 1 | Sleeve, 1″ Long |
| 15 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 16 | G10210 | 1 | Washer, ⅜” USS |
| 17 | GD11962 | 1 | Idler |
| 18 | G10003 | 3 | Hex Head Cap Screw, ⅜”-16 x 1 ½” |
| 18 | G10108 | 3 | Lock Nut, ⅜”-16 |
| 19 | GD10867 | 2 | Stop |
| 20 | G10326 | 1 | Hex Head Cap Screw, ⅜”-16 x 3 ¾” |
| 21 | G10551 | 1 | Clevis Pin, ¼” x 2 ½” |
| 21 | G10669 | 1 | Hair Pin Clip, No. 22 |
| 22 | G10312 | 2 | Carriage Bolt, 5∕16″-18 x ¾” |
| 22 | G10620 | 2 | Serrated Flange Nut, 5∕16″-18 |
| 23 | GD1033 | 1 | Shield |
| 25 | GA10157 | 1 | Shank W/Gauge Wheel Pivot Spindle And Set Screw |
| 25 | GD11001 | Spindle | |
| 25 | G10438 | Hex Head Cap Screw, ½”-13 x ¾” | |
| 26 | G10207 | 2 | Washer, ⅞” O.D. x 13∕32″ I.D. x .134″ (If Applicable) |
| 27 | GD11845 | 1 | Dust Cap |
| 29 | GB0285 | 1 | Collar, Depth Adjustment |
| 30 | GB0265 | 1 | Pivot Link, Depth Adjustment |
| 31 | GD16245 | Sun Shade (Rubber) | |
| 32 | G10047 | 1 | Hex Head Cap Screw, ⅜”-16 x 1 ¾” |
| 32 | G10203 | 2-3 | Washer, ⅜” SAE |
| 32 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 33 | GD17014 | 1 | Hose Guide |
| 34 | G11298 | 2 | Hex Slotted Head Cap Screw, #10-32 x 1″ |
| 34 | G11284 | 2 | Serrated Flange Nut, #10-32 |
| 35 | GA13580 | 1 | Limit Switch W/Cable |
| 36 | GD19317 | 1 | Implement Switch Bracket |
PNEUMATIC DOWN PRESSURE PACKAGE OPTION AND
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GA11982 | 1 | Air Spring Assembly |
| 2 | GB0394 | 1 | Saddle |
| 3 | G11018 | 2 | Hex Head Cap Screw, ⅝”-18 x 1 ¼” |
| 3 | GD7805 | 2 | Special Washer, ⅝”, Hardened |
| 3 | GD3180-30 | 2 | Sleeve, ⅞” O.D. x ⅝” I.D. x 21⁄32″ |
| 4 | GB0396 | 1 | Head Mount |
| 5 | GB0397 | 1 | Shoulder Nut, ¾”-16 |
| 6 | GB0395 | 2 | Bracket |
| 7 | G11220 | 4 | Hex Socket Cap Screw, ½”-13 x 1 ½” |
| 7 | G10071 | 4 | Serrated Flange Nut, ½”-13 |
| 8 | G10004 | 2 | Hex Head Cap Screw, ⅜”-16 x 1 ¼” |
| 8 | G10203 | 2 | Washer, ⅜” SAE |
| 8 | GD11963-04 | 2 | Spacer, ¼” |
| 8 | G10108 | 2 | Lock Nut, ⅜”-16 |
| 9 | GD17794 | 1 | Link |
| 10 | GB0393 | 1 | Plate |
| 11 | G10037 | 7 | Hex Head Cap Screw, ½”-13 x 1 ¼” |
| 11 | G10206 | 2 | Washer, ½” SAE (Lower Two Holes Only) |
| 11 | G10228 | 7 | Lock Washer, ½” |
| 12 | GB0390 | 1 | Yoke Mount |
| 13 | GB0392 | 1 | Yoke |
| 14 | GB0391 | 1 | Mount |
| 15 | G10017 | 2 | Hex Head Cap Screw, ½”-13 x 1 ½” |
| 15 | G10216 | 2 | Washer, ½” USS |
| 15 | G10228 | 2 | Lock Washer, ½” |
| 15 | G10102 | 2 | Hex Nut, ½”-13 |
| 16 | GB0389 | 1 | Plate |
| 17 | GB0398 | 1 | Extension |
| 18 | G10039 | 4 | Hex Head Cap Screw, ½”-13 x 1 ¾” |
| 18 | G10206 | 4 | Washer, ½” SAE |
| 18 | G10111 | 4 | Lock Nut, ½”-13 |
| 19 | G10037 | 1 | Hex Head Cap Screw, ½”-13 x 1 ¼” |
| 19 | G10228 | 1 | Lock Washer, ½” |
| 20 | GD18891 | 1 | Spacer, 1 ¼” O.D. x 1″ |
| 21 | G10020 | 1 | Hex Head Cap Screw, ¼”-20 x ⅝” |
| 22 | GR1812 | 1 | Sprocket, 19 Tooth |
| 23 | G11295 | 1 | Retaining Ring |
| 24 | G11243 | 1 | Slotted Flat Head Machine Screw, No. 8-32 x ½”, Stainless Steel |
| 25 | GR1894 | 1 | Air Housing Cover |
| 26 | GR1815 | 1 | Sprocket Hub |
| 27 | GR1818 | 1 | Ratchet Gear |
| 28 | GR1813 | 1 | Clutch Spring |
| 29 | GR1830 | 1 | Hex Bushing |
| 30 | GR1895 | 1 | Air Clutch Housing |
| 31 | G10023 | 3 | Hex Head Cap Screw, ¼”-20 x ¾” |
| 31 | G10103 | 3 | Hex Nut, ¼”-20 |
| 32 | GR1896 | 1 | Air Cylinder |
| 33 | GR1819 | 1 | Push Connect, ⅛” NPT Male x ¼” |
| 34 | G11296 | 1 | Pan Head Machine Screw, ¼”-20 x ¾” x ¾” |
| 35 | GR1898 | 1 | Filter |
| 36 | G10130 | Square Head Machine Bolt, 5∕16″-18 x 1 ¾” | |
| 36 | G10923 | Flange Nut, 5∕16″-18, No Serration | |
| 37 | GD11045 | Lock Clamp | |
| 38 | GA1720 | 1 | Bearing/Sprocket, ⅞” Hex Bore |
PNEUMATIC DOWN PRESSURE CONTROL CONSOLE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GA7856 | 2 | Power Lead Adapter |
| 2 | GA12813 | 1 | Control Box Assembly |
| 3 | GA12815 | 1 | Sending Unit |
| 4 | GA12814 | 1 | Wiring Harness W/Fuse Holder And Fuse, 206″ |
| 4 | GD14258 | Fuse Holder | |
| 4 | GD14660 | Fuse, 2 Amp Delay Action | |
| 5 | G1K268 | Console Cable Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable | |
| 6 | G1K267 | Console Cable Connector Kit, Includes: (1) 3-Pin Connector, (1) Cable | |
| 7 | GA9964 | 1 | Strain Relief |
| 8 | GR1363 | 1 | Hex Face Nut, 15⁄32″-32 |
| 8 | GR1364 | 1 | Internal Tooth Lock Washer, 15∕32″ |
| 9 | GA6978 | 1 | Switch, 3 Position Toggle, Momentary On-Off-Momentary On |
| 10 | G1K248 | 3-Pin Female Connector Kit (Black), Includes: (3) 3-Pin Female | |
| 11 | G1K252 | 3-Pin Male Connector Kit (Black), Includes: (3) 3-Pin Male Housings, | |
| 12 | GA8328 | 4-Pin Female Connector Kit, Includes: (1) 4-Pin Female Housing, | |
| 13 | GA8329 | 4-Pin Male Connector Kit, Includes: (1) 4-Pin Male Housing, | |
| 14 | G1K321 | 2-Pin Female Connector Kit (Black), Includes: (3) 2-Pin Female | |
| 15 | G1K320 | 2-Pin Male Connector Kit (Black), Includes: (3) 2-Pin Male Housings, | |
| 16 | GA9964 | 2 | Strain Relief |
| 17 | GA12684 | 1 | Wiring Harness W/Fuse Holder And Fuse, 60′ |
| 17 | GD14258 | Fuse Holder | |
| 17 | GD18275 | Fuse, 20 Amp | |
| 18 | GA12858 | 1 | Wiring Harness, 60′ |
| 20 | GD17151-06 | 1 | Nylon Tubing, ¼” O.D. x 1 ½’ |
| 21 | GD18796 | 1 | Reducer, ⅜” To ¼” |
| 22 | GD18010 | 1 | Tee, ⅜” Tube Union |
| 23 | GA12812 | 1 | Hall Effect Adapter |
AIR COMPRESSOR PACKAGE OPTION, DUAL SOLENOID
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD18112 | 1 | Cover |
| 2 | G11066 | 8 | Phillips Pan Head Machine Screw, No. 10-24 x ¾”, Stainless Steel |
| 2 | G10992 | 8 | Serrated Flange Nut, No. 10-24 |
| 3 | GA12102 | 1 | Air Compressor |
| 4 | GA12404 | 1 | Filter Assembly |
| 4 | GR1809 | Filter | |
| 5 | GA12358 | 1 | Mount |
| 6 | G10019 | 4 | Hex Head Cap Screw, 5⁄16″-18 x 1″ |
| 6 | G10219 | 4 | Washer, 5⁄16″ USS |
| 6 | G10232 | 4 | Lock Washer, 5⁄16″ |
| 6 | G10106 | 4 | Hex Nut, 5⁄16″-18 |
| 7 | GA13512 | 1 | Valve Stem, ¼” NPT |
| 8 | GD19238 | 2 | Nipple, ¼” NPT |
| 9 | GD17156 | 3 | Plug, ¼” NPT |
| 10 | GD19237 | 2 | Tee, ¼” NPT |
| 11 | GA11988 | 1 | Tank, 3 Gallon |
| 12 | GA11991 | 1 | Drain, ¼” NPT |
| 13 | GR1778 | 1 | Pressure Switch |
| 14 | GA13169 | 1 | Tube Cutter W/Blade |
| 14 | GR1843 | Blade | |
| 15 | G11247 | 4 | Slotted Pan Head Machine Screw, M4-0.7 x 8 |
| 16 | GA11992 | 1 | Shutoff Valve, ¼” NPT |
| 17 | GD17156 | 2 | Plug, ¼” NPT |
| 18 | GA11997 | 1 | Breather, ¼” NPT |
| 19 | GD17154 | 1 | Connector, ¼” Male |
| 20 | GA11993 | 1 | Block |
| 21 | GD17141 | 3 | Connector, ¼” Male |
| 22 | GA11994 | 2 | Solenoid |
| 23 | GD18078 | 1 | Female Cross, ¼” NPT |
| 24 | GA12104 | 1 | Pressure Gauge, ¼” NPT |
| 25 | GD17143 | 1 | Swivel Elbow, ¼” NPT x ⅜” |
| 26 | GD4743 | 2 | U-Bolt, 3″ x 3″ x ½”-13 |
| 26 | G10228 | 4 | Lock Washer, ½” |
| 26 | G10102 | 4 | Hex Nut, ½”-13 |
| 27 | GD18119 | 2 | Compressor Mount |
| 28 | G10040 | 2 | Hex Head Cap Screw, ¼”-20 x 1 ¾” |
| 28 | G10227 | 2 | Lock Washer, ¼” |
| 28 | G10209 | 2 | Washer, ¼” USS |
| 29 | GD18010 | Tee, ⅜” Tube Union, Pull Row Unit (Pneumatic Down Pressure) | |
| 29 | GD18274 | Tee, ⅜” x ⅛” NPT Extended, Push Row Unit (Pneumatic Down Pressure) | |
| 29 | GD18015 | Tee, ¼” Press On, Pull/Push Row Units (Air Clutch) | |
| 30 | GD17150-02 | Nylon Tubing, ⅜” O.D. x 44′, 8 Row Pull Row Units (Pneumatic Down Pressure) | |
| 30 | GD17150-03 | Nylon Tubing, ⅜” O.D. x 64′, 12 Row Pull Row Units (Pneumatic Down Pressure) | |
| 30 | GD17150-04 | Nylon Tubing, ⅜” O.D. x 86′, 16 Row Pull Row Units (Pneumatic Down Pressure) | |
| 30 | GD17150-08 | Nylon Tubing, ⅜” O.D. x 60′, 11 Row Push Row Units (Pneumatic Down Pressure) | |
| 30 | GD17150-09 | Nylon Tubing, ⅜” O.D. x 82′, 15 Row Push Row Units (Pneumatic Down Pressure) | |
| 30 | GD17150-12 | Nylon Tubing, ⅜” O.D. x 5′, Even-Row Push Row Unit (Pneumatic Down Pressure) | |
| 30 | GD17151-01 | Nylon Tubing, ¼” O.D. x 52′, 12 Row Pull/Push Row Units (Air Clutch) | |
| 30 | GD17151-02 | Nylon Tubing, ¼” O.D. x 70′, 16 Row Pull Row Units (Air Clutch) | |
| 30 | GD17151-03 | Nylon Tubing, ¼” O.D. x 37′, 11 Row Push Row Units (Air Clutch) | |
| 31 | GD18011 | Elbow, ⅜” x ⅛” NPT Extended, Pull Row Unit (Pneumatic Down Pressure) |
RUB021/RUB022(RU78f/B0366)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD1113 | 2 | U-Bolt, 5″ x 7″ x ⅝”-11 |
| 1 | G10230 | 4 | Lock Washer, ⅝” |
| 1 | G10104 | 4 | Hex Nut, ⅝”-11 |
| 2 | GD10036 | 1 | Mounting Support Plate |
| 3 | GB0218 | 4 | Bushing, 21∕32″ I.D. x ⅞” O.D. x 19∕32″ Long |
| 4 | GD11422 | 2 | Upper Parallel Arm |
| 5 | G10732 | 4 | Hex Head Cap Screw, ⅝”-18 x 2″ |
| 5 | GD7805 | 4 | Special Washer, ⅝”, Hardened |
| 5 | G10412 | 4 | Lock Nut, ⅝”-18 |
| 6 | GB0186 | 2 | Spring Anchor |
| 7 | GD14217 | 2 | Tab Lock Pin, 7∕16″ x 1 ½” |
| 8 | GD8249 | 2-4 | Spring |
| 10 | GA5651 | 1 | Lower Parallel Arm |
| 11 | GA1720 | 1 | Bearing/Sprocket, ⅞” Hex Bore |
| 12 | G10001 | 2 | Hex Head Cap Screw, ⅜”-16 x 1″ |
| 12 | G10229 | 2 | Lock Washer, ⅜” |
| 12 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 13 | G10007 | 4 | Hex Head Cap Screw, ⅝”-11 x 1 ½” |
| 13 | G10230 | 4 | Lock Washer, ⅝” |
| 13 | G10104 | 4 | Hex Nut, ⅝”-11 |
| 14 | GB0366 | 2 | Extension Bracket |
15″ SEED OPENER DISC BLADE/BEARING ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10328 | 2 | Hex Head Cap Screw, ⅜”-16 x ⅝” |
| 1 | G10622 | 2 | Serrated Flange Nut, ⅜”-16 |
| 2 | GA2012R | 1 | Disc Scraper, R.H. |
| 2 | GA2012L | Disc Scraper, L.H. (Shown) | |
| 3 | G10427 | 12 | Rivet, ¼” x ½” |
| 4 | GD11017 | 1 | Special Hex Head Cap Screw, ⅝”-11 x 1 ½”, L.H. Threads |
| 4 | G10007 | 1 | Hex Head Cap Screw, ⅝”-11 x 1 ½” |
| 5 | GD11845 | 2 | Dust Cap |
| 6 | G10204 | 2 | Special Machine Bushing, ⅝” x 1″ O.D. |
| 7 | GD10473 | 2 | Bearing Housing |
| 8 | GA2014 | 2 | Bearing |
| 9 | GD11306 | 2 | Disc Blade, 3.5 mm x 15″ |
| 10 | G10213 | Machine Bushing, ⅝” (.030″ Thick)(As Required) | |
| 12 | GB0301 | 1 | Seed Tube Guard/Inner Scraper |
| 13 | G10912 | 2 | Hex Socket Head Cap Screw, 5∕16″-18 x 1″, Grade 8 |
| 14 | G10325 | 1 | Hex Head Cap Screw, ⅜”-16 x 2 ¾” |
| 14 | G10622 | 1 | Serrated Flange Nut, ⅜”-16 |
| 15 | GD11259 | 1 | Sleeve, ⅜” I.D. x ⅝” O.D. x 1 25∕32″ Long |
GAUGE WHEELS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10940 | Machine Bushing, 1″ (.048″ Thick) | |
| 2 | G10216 | 2 | Washer, ½” USS |
| 3 | G10228 | 2 | Lock Washer, ½” |
| 4 | G10014 | 1 | Hex Head Cap Screw, ½”-13 x 1″ |
| 5 | GD11453 | 2 | Cover |
| 6 | G10338 | 12 | Carriage Bolt, 5∕16″-18 x 1 1 |
| 6 | G10620 | 12 | Serrated Flange Nut, 5∕16″-18 |
| 7 | G10924 | 8 | Carriage Bolt, 5∕16″-18 x 1 ¾” |
| 7 | G10620 | 8 | Serrated Flange Nut, 5∕16″-18 |
| 8 | G10010 | 2 | Hex Head Cap Screw, ⅝”-11 x 3″ |
| 8 | G10230 | 2 | Lock Washer, ⅝” |
| 9 | G10018 | 14 | Hex Head Cap Screw, 5∕16″-18 x ⅝” |
| 9 | G10109 | 14 | Lock Nut, 5∕16″-18, Grade 8 |
| 10 | GD11423 | 4 | Half Wheel |
| 11 | GD1086 | 2 | Tire |
| 12 | GA6171 | 2 | Bearing |
| 13 | G10204 | 2 | Special Machine Bushing, ⅝” x 1″ O.D. |
| 14 | GA7975 | 1 | Wheel Arm W/Grease Fitting, Bushings And Seals, L.H. (Shown) |
| 14 | GA7976 | 1 | Wheel Arm W/Grease Fitting, Bushings And Seals, R.H. |
| 14 | G10640 | 1 | Grease Fitting, ¼”-28 (Per Arm) |
| 14 | GB0276 | 2 | Bushing, 1″ I.D. x 1 ¼” O.D. x 1″ Long (Per Arm) |
| 14 | GD10991 | 2 | Seal (Per Arm) |
COVERING DISCS/SINGLE PRESS WHEEL
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10001 | 1 | Hex Head Cap Screw, ⅜”-16 x 1″ |
| 1 | G10210 | 1 | Washer, ⅜” USS |
| 2 | GB0268 | 1 | Wheel Arm Stop |
| 3 | G10801 | 2 | Carriage Bolt, ½”-13 x 2 ¼” |
| 3 | G10315 | Carriage Bolt, ½”-13 x 2 ½” (Used W/Straight Drop In-Furrow | |
| 3 | G10102 | 2 | Hex Nut, ½”-13 |
| 4 | GA2054 | 1 | Spring |
| 5 | GB0239 | 2 | Eccentric Bushing |
| 6 | G10102 | 1 | Hex Nut, ½”-13 |
| 7 | G10015 | 1 | Adjusting Bolt, ½”-13 x 5″ |
| 8 | GA6619 | 1 | Mounting Arm |
| 9 | G10463 | 2 | Cotter Pin, ¼” x 1 ½” |
| 10 | G10171 | 4 | Hex Head Cap Screw, 5∕16″-18 x 1 ¼” |
| 10 | G10232 | 4 | Lock Washer, 5∕16″ |
| 10 | G10106 | 4 | Hex Nut, 5∕16″-18 |
| 11 | GA6620 | 2 | Bracket |
| 12 | GA6618 | 2 | Mount |
| 13 | G10303 | 2 | Carriage Bolt, 5∕16″-18 x 1″ |
| 13 | G10219 | 2 | Washer, 5∕16″ USS |
| 13 | G10232 | 2 | Lock Washer, 5∕16″ |
| 13 | G10106 | 2 | Hex Nut, 5∕16″-18 |
| 14 | G10107 | 3 | Lock Nut, ⅝”-11 |
| 15 | GD1109 | 2 | Bushing, 41∕64″ I.D. x ⅞” O.D. x ¼” Long |
| 16 | GD9290 | 2 | Disc Blade, 8″ |
| 17 | G10018 | 7 | Hex Head Cap Screw, 5∕16″-18 x ⅝” |
| 17 | G10109 | 7 | Lock Nut, 5∕16″-18, Grade 8 |
| 18 | G10152 | 1 | Hex Head Cap Screw, ⅝”-11 x 9″ |
| 19 | GD3180-12 | 2 | Sleeve, ⅝” I.D. x ⅞” O.D. x 2 ⅞” Long |
| 20 | GD9562 | 2 | Half Wheel |
| 21 | GA6171 | 1 | Bearing |
| 22 | GD9305 | 1 | Tire |
| 23 | GA2014 | 2 | Bearing |
| 24 | GD10473 | 2 | Bearing Housing |
| 25 | G10427 | 12 | Rivet, ¼” x ½” |
| 26 | G10006 | 2 | Hex Head Cap Screw, ⅝”-11 x 2 ¼” |
| 27 | GD11845 | 2 | Dust Cap |
V” CLOSING WHEELS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10801 | 2 | Carriage Bolt, ½”-13 x 2 ¼” |
| 1 | G10315 | Carriage Bolt, ½”-13 x 2 ½” (Used W/Straight Drop In-Furrow | |
| 1 | G10111 | 2 | Lock Nut, ½”-13 |
| 2 | GB0268 | 1 | Wheel Arm Stop |
| 3 | G10001 | 1 | Hex Head Cap Screw, ⅜”-16 x 1″ |
| 3 | G10210 | 1 | Washer, ⅜” USS |
| 4 | GB0282 | 2 | Stepped Bushing |
| 5 | GB0239 | 2 | Eccentric Bushing |
| 6 | GD8460 | 1 | Spring |
| 7 | G10064 | 6 | Hex Head Cap Screw, ¼”-20 x 1″ |
| 8 | G10013 | 2 | Hex Head Cap Screw, ⅝”-11 x 3 ½” |
| 8 | G10107 | 2 | Lock Nut, ⅝”-11 |
| 9 | G1K345 | Closing Wheel Shield Kit W/Hardware And Instruction | |
| 9 | G10308 | 2 | Carriage Bolt, ⅜”-16 x ¾” |
| 9 | G10599 | 1 | Carriage Bolt, ⅜”-16 x 1 ¼” |
| 9 | G10210 | 1 | Washer, ⅜” USS |
| 9 | G10229 | 3 | Lock Washer, ⅜” |
| 9 | G10101 | 3 | Hex Nut, ⅜”-16 |
| 10 | GD9120 | 4 | Nylon Half Wheel |
| 11 | GA6171 | 2 | Bearing |
| 12 | GD1085 | 2 | Rubber Tire, 1″ x 12″ |
| 13 | GD1109 | 2 | Bushing, 41∕64″ I.D. x ⅞” O.D. x ¼” Long |
| 14 | G10133 | 1 | Hex Head Cap Screw, 5∕16″-18 x 1 ½” |
| 14 | G10109 | 1 | Lock Nut, 5∕16″-18, Grade 8 |
| 15 | GA6597 | Cast Iron Closing Wheel W/Bearing | |
| 15 | GA6171 | Bearing | |
| 16 | GA8322 | 1 | Arm |
| 17 | GB0254 | 1 | Lever |
| 18 | GD7805 | 2 | Special Washer, ⅝”, Hardened |
| 19 | G10230 | 2 | Lock Washer, ⅝” |
DRAG CLOSING ATTACHMENT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10599 | 6 | Carriage Bolt, ⅜”-16 x 1 ¼” |
| 1 | G10210 | 6 | Washer, ⅜” USS |
| 1 | G10229 | 6 | Lock Washer, ⅜” |
| 1 | G10101 | 6 | Hex Nut, ⅜”-16 |
| 2 | GD11508 | 1 | Front Bracket |
| 3 | GD11313 | 2 | Blade |
| 4 | G10007 | 1 | Hex Head Cap Screw, ⅝”-11 x 1 ½” |
| 4 | G10230 | 1 | Lock Washer, ⅝” |
| 4 | G10104 | 1 | Hex Nut, ⅝”-11 |
| 5 | GD11509 | 1 | Rear Bracket |
HOPPER SUPPORT AND METER DRIVE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GB0314 | 2 | Hopper Mount |
| 2 | GB0218 | 4 | Bushing, 21∕32″ I.D. x ⅞” O.D. x 19∕32″ Long |
| 3 | G10752 | 2 | Hex Head Cap Screw, ⅝”-18 x 2 ¼” |
| 3 | GD7805 | 2 | Special Washer, ⅝”, Hardened |
| 3 | G10412 | 2 | Lock Nut, ⅝”-18 |
| 4 | G10751 | 2 | Hex Head Cap Screw, ⅝”-18 x 1 ¾” |
| 4 | GD7805 | 2 | Special Washer, ⅝”, Hardened |
| 4 | G10412 | 2 | Lock Nut, ⅝”-18 |
| 5 | G10602 | 1 | Spring Pin, ¼” x 1 ½” |
| 6 | G10567 | 1 | External Retaining Ring, ⅝” |
| 7 | GD11239 | 1 | Knob |
| 8 | G10338 | 2 | Carriage Bolt, 5∕16″-18 x 1 ¼” |
| 8 | G10620 | 2 | Serrated Flange Nut, 5∕16″-18 |
| 9 | GB0331 | 1 | Clutch Adapter Plate |
| 10 | G10061 | 1 | Hex Head Cap Screw, ⅜”-16 x 3 ½” |
| 10 | G10210 | 2 | Washer, ⅜” USS |
| 10 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 11 | G10309 | 2 | Carriage Bolt, ¼”-20 x ⅝”, Grade 2 |
| 11 | G10621 | 2 | Serrated Flange Nut, ¼”-20 |
| 12 | GA2007 | 1 | Hopper Hold Down Latch |
| 13 | GA10155 | 1 | Hopper Support |
| 14 | GA12143 | 1 | Double Sprocket And Bearing, Drive Clutch, 11/28 Tooth |
| 15 | GD11413 | 1 | Spring |
| 16 | GD15747 | 1 | Shaft |
| 17 | GB0278 | 1 | Coupler |
| 18 | G10546 | 1 | Spring Pin, 3∕16″ x 1 ¼” |
| 19 | GD17192 | 1 | Bolt-On Sprocket, 28 Tooth |
| 20 | G11222 | 3 | Hex Socket Button Head Cap Screw, 5∕16″-18 x ½”, Stainless Steel |
| 20 | G10620 | 3 | Serrated Flange Nut, 5∕16″-18 |
| 21 | GA10137 | 1 | Double Sprocket And Bearing, Drive Clutch, 11/19 Tooth |
SEED HOPPER AND LID
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD11279 | 1 | Lid |
| 2 | GA10634 | 1 | Seed Hopper |
SEED METER
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GA11911 | 1 | Vacuum Cover W/Elbow And Cap |
| 1 | GD17099 | 3∕16″ Hose Barb Elbow | |
| 1 | GD17152 | Cap | |
| 2 | GA12133 | 1 | Cleanout Brush (Used With 60 Cell Milo/Grain Sorghum Disc) |
| 3 | GD17049 | Seed Disc, Corn/Popcorn, 39 Cell, Light Blue Color-Coded | |
| 3 | GD17048 | Seed Disc, Low-Rate Corn/Popcorn, 24 Cell, Light Green Color-Coded | |
| 3 | GD14467 | Seed Disc, Soybean, 60 Cell, Black Color-Coded | |
| 3 | GD14468 | Seed Disc, High-Rate Soybean, 120 Cell, Dark Blue Color-Coded | |
| 3 | GD17050 | Seed Disc, Milo/Grain Sorghum, 60 Cell, Yellow Color-Coded | |
| 3 | GD17187 | Seed Disc, Hill-Drop Cotton, Acid-Delinted, 3 Seeds Per Cell, | |
| 3 | GD18095 | Seed Disc, Small Hill-Drop Cotton, Acid-Delinted, 20 Cell (3 Seeds Per | |
| 3 | GD17186 | Seed Disc, Cotton, Acid-Delinted/Small Dry Edible Bean, | |
| 3 | GD18098 | Seed Disc, Small Cotton/Sunflower, 54 Cell, White Color-Coded | |
| 3 | GD14477 | Seed Disc, Large Dry Edible Bean, 54 Cell, Tan Color-Coded | |
| 4 | GD17028 | 1 | Wall Brush/Vent |
| 5 | GD17021 | 1 | Foam Spacer |
| 6 | GB0328 | 1 | Mount |
| 7 | GA5698 | 1 | Bearing |
| 8 | GD14541 | 1 | Discharge Cover |
| 9 | G10602 | 1 | Spring Pin, ¼” x 1 ½” |
| 10 | G10603 | 1 | Spring Pin, ¼” x 1 ¼” |
| 11 | G11213 | 1 | Hex Socket Head Cap Screw, ¼”-20 x ¾” |
| 12 | GA11935 | 1 | Crowder Brush |
| 13 | G10260 | 1 | Hex Socket Head Cap Screw, ¼”-20 x ½” |
| 14 | GD17047 | 1 | Air Inlet Screen |
| 15 | GD17162 | 3 | Push Nut, ⅛” I.D. |
| 16 | GA10755 | 1 | Singulator Brush |
| 17 | GD14592 | 1 | Spring |
| 18 | GB0358 | 1 | Cap |
| 19 | GD15663 | 1 | Brush Adjustment Lever |
| 20 | G11173 | 1 | Hex Socket Head Cap Screw, No. 10-24 x ⅜”, Stainless Steel |
| 21 | G11172 | 4 | Hex Socket Head Shoulder Screw, ¼”-20 x ⅜”, Stainless Steel |
| 22 | GB0319 | 1 | Housing |
| 23 | G11009 | 2 | Locking Thumbscrew, 5∕16″-18 x ¾” |
| 24 | GD17104 | 1 | Seed Baffle (Used With 60 Cell Milo/Grain Sorghum Disc, 60 Cell |
| 25 | G11210 | 1 | Rib Neck Bolt, ¼”-20 x ¾” |
| 25 | G10323 | 1 | Hex Flange Nut, ¼”-20, No Serrations |
| 26 | GD15700 | 1 | Shank Cover, EdgeVac® |
| 27 | GA12154 | Cleanout Brush W/Ball-Type Ejector (Used With 20 Cell Hill-Drop |
GRANULAR CHEMICAL HOPPER AND
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10210 | 3 | Washer, ⅜” USS |
| 2 | GD2971-10 | 1 | Sleeve, 9∕16″ Long |
| 3 | GD11219 | 1 | Spring |
| 4 | G10201 | 1 | Special Washer, ⅜” x 1 ½” O.D. |
| 5 | GD1026 | 1 | Sleeve, 1 3∕16″ Long |
| 6 | GD11962 | 1 | Idler |
| 7 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 8 | G10670 | 2 | Hair Pin Clip, No. 3 |
| 9 | GD1059L | 1 | Support, L.H. (Shown) |
| 9 | GD1059R | 1 | Support, R.H. |
| 10 | G10002 | 4 | Hex Head Cap Screw, ⅜”-16 x ¾” |
| 10 | G10229 | 4 | Lock Washer, ⅜” |
| 11 | G10312 | 8 | Carriage Bolt, 5∕16″-18 x ¾” |
| 11 | G10620 | 8 | Serrated Flange Nut, 5∕16″-18 |
| 12 | G10325 | 1 | Hex Head Cap Screw, ⅜”-16 x 2 ¾” |
| 13 | G10567 | 3 | External Retaining Ring, ⅝” |
| 14 | GD11305 | 1 | Plate |
| 15 | A10759 | 1 | Hopper Panel Extension (Non-Stock Item) |
| 16 | GD11424 | 4 | Block |
| 17 | G10023 | 2 | Hex Head Cap Screw, ¼”-20 x ¾” |
| 17 | G10621 | 2 | Serrated Flange Nut, ¼”-20 |
| 18 | GD1060 | 1 | Hinge |
| 19 | GA8371 | 1 | Hopper |
| 20 | GA4444 | 1 | Lid |
| 21 | GD11239 | 1 | Knob |
| 22 | G10602 | 1 | Spring Pin, ¼” x 1 ½” |
GRANULAR CHEMICAL METER AND METER DRIVE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10567 | 3 | External Retaining Ring, ⅝” |
| 2 | GD11239 | 1 | Knob |
| 3 | G10602 | 1 | Spring Pin, ¼” x 1 ½” |
| 5 | GA8364 | 1 | Sprocket And Bearing, Drive Clutch, 24 Tooth |
| 6 | GD11413 | 1 | Spring |
| 7 | GD11240 | 1 | Shaft |
| 8 | GB0278 | 1 | Coupler |
| 9 | G10546 | 2 | Spring Pin, 3∕16″ x 1 ¼” |
| 10 | GD11297 | 1 | Shaft |
| 11 | G10921 | 4 | Hex Socket Head Cap Screw, No. 10-24 x ⅞” |
| 11 | G10257 | 4 | Lock Washer, No. 10 |
| 12 | GD7148 | 1 | Feed Roller, Hex Bore |
| 13 | GB0115 | 2 | Bearing |
| 14 | GD7258 | 2 | Hex Bushing |
| 15 | G3303-108 | 1 | Chain, No. 41, 108 Pitch Including Connector Link |
| 15 | GR0196 | 1 | Connector Link, No. 41 |
| 16 | G10660 | 1 | Wave Washer, ½” |
| 17 | G10209 | 1 | Washer, ¼” USS |
| 18 | G10570 | 1 | Slotted Hex Self-Tapping Screw, ¼”-20 x ¾” |
| 19 | G11073 | 2 | Slotted Hex Self-Tapping Screw, No. 10 x ⅜” |
| 20 | GD1061 | 1 | Support Strap |
| 21 | GD1063 | 1 | Metering Gate |
| 22 | GB0116 | 1 | Granular Housing |
GRANULAR CHEMICAL BANDING OPTIONS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD2423 | 1 | Funnel |
| 2 | G11209 | 1 | Wire Hose Clamp, ¾” |
| 3 | GD2947 | 1 | Hose, 7∕16″ x 28″ |
| 4 | G10523 | 2 | Slotted Pan Head Self-Tapping Screw, No. 10 x ½” |
| 5 | GA6907 | 1 | Slope-Compensating Bander W/Hardware (4 ½” Band Width) |
| 5 | G10864 | 1 | Uni-Clamp |
| 5 | G10757 | 2 | Pan Head Screw, No. 10-32 x 1 ¼” |
| 5 | G10758 | 2 | Hex Nut, No. 10-32 |
| 6 | GD10963 | 1 | U-Bolt, 1 ½” x 1 5∕16″ x ¼”-20 |
| 6 | G10209 | 2 | Washer, ¼” USS |
| 6 | G10110 | 2 | Lock Nut, ¼”-20, Grade B |
| 7 | GD10984 | 1 | Spacer |
| 8 | GD1115L | Hanger Bracket, L.H. | |
| 9 | G10452 | Cotter Pin, ⅛” x ½” | |
| 10 | GD1115R | Hanger Bracket, R.H. | |
| 11 | G10310 | Carriage Bolt, ¼”-20 x ¾”, Grade 2 | |
| 11 | G10227 | Lock Washer, ¼” | |
| 11 | G10103 | Hex Nut, ¼”-20 | |
| 12 | GD1116 | Hanger | |
| 13 | GA2075 | Diffuser, 14″ Band | |
| 14 | G10306 | Carriage Bolt, ⅜”-16 x 2″ | |
| 14 | G10229 | Lock Washer, ⅜” | |
| 14 | G10101 | Hex Nut, ⅜”-16 | |
| 15 | GD1118 | Clamp | |
| 16 | G10315 | 1 | Carriage Bolt, ½”-13 x 2 ½” |
| 17 | GA6741 | 1 | Bracket (Straight Drop In-Furrow) |
| 18 | G1K385 | Bander Shield Kit W/Hardware And Instruction | |
| 18 | G10003 | 1 | Hex Head Cap Screw, ⅜”-16 x 1 ½” |
| 18 | GD14659 | 1 | Special Washer, ⅜”, Hardened |
RUA055(RU95)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10621 | 4 | Serrated Flange Nut, ¼”-20 |
| 2 | GD2460 | 2 | Eyebolt, ¼”-20 |
| 3 | G3305-01 | 4 | Twin Loop Chain, 9 Links |
| 4 | GD1143 | 1 | Front Bracket |
| 5 | G10305 | 4 | Carriage Bolt, ⅜”-16 x 1″ |
| 5 | G10529 | 4 | External Tooth Lock Washer, ⅜” |
| 5 | G10622 | 4 | Serrated Flange Nut, ⅜”-16 |
| 6 | GD1145 | 7 | Spring Tooth |
| 7 | G10308 | 9 | Carriage Bolt, ⅜”-16 x ¾” |
| 7 | G10622 | 9 | Serrated Flange Nut, ⅜”-16 |
| 8 | GD1144 | 1 | Rear Bracket |
| 9 | GA2094 | 2 | Cable Assembly |
ROW UNIT MOUNTED NO TILL COULTER
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10574 | 4 | Carriage Bolt, ½”-13 x 1 ¼” |
| 1 | G10111 | 4 | Lock Nut, ½”-13 |
| 2 | GA11520 | 1 | Arm |
| 3 | G10036 | 1 | Hex Head Cap Screw, ⅝”-11 x 4″ |
| 3 | G10107 | 1 | Lock Nut, ⅝”-11 |
| 4 | G10574 | 4 | Carriage Bolt, ½”-13 x 1 ¼” |
| 4 | G10111 | 4 | Lock Nut, ½”-13 |
| 5 | GD11677 | 2 | Adapter |
| 6 | GA8641 | 1 | Hub W/Bearing And Retaining Ring |
| 6 | GA8603 | Bearing, Double Row | |
| 6 | GD11652 | Retaining Ring, 2 7∕16″ | |
| 7 | GD7803 | Disc Blade, Fluted, 1″, 8 Flutes (Shown) | |
| 7 | GD7804 | Disc Blade, Bubbled, 1″ | |
| 7 | GD9254 | Disc Blade, Fluted, ¾”, 13 Flutes | |
| 8 | GD14398 | Spacer |
ROW UNIT MOUNTED BED LEVELER
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10536 | 1 | Detent Pin, ½” x 2 ½” Grip |
| 2 | G10597 | 1 | Square Head Set Screw, ⅝”-11 x 2 ¼” |
| 3 | G10503 | 1 | Hex Jam Nut, ⅝”-11, Grade 2 |
| 4 | GA5719 | 1 | Mounting Bracket |
| 5 | GD7889 | 6 | Bushing, 1″ O.D. x 9∕16″ I.D. x 7∕16″ Long |
| 6 | G10039 | 2 | Hex Head Cap Screw, ½”-13 x 1 ¾” |
| 6 | GD14674 | 2 | Special Washer, ½”, Hardened |
| 6 | G10111 | 2 | Lock Nut, ½”-13 |
| 7 | G10585 | 1 | Hex Head Cap Screw, ½”-13 x 3 ¼” |
| 7 | G10216 | 2 | Washer, ½” USS |
| 7 | G10111 | 1 | Lock Nut, ½”-13 |
| 8 | GD7890 | 2 | Link |
| 9 | G10017 | 2 | Hex Head Cap Screw, ½”-13 x 1 ½” |
| 9 | G10216 | 2 | Washer, ½” USS |
| 9 | G10111 | 2 | Lock Nut, ½”-13 |
| 10 | GA5715 | 1 | Anchor |
| 11 | G10017 | 2 | Hex Head Cap Screw, ½”-13 x 1 ½” |
| 11 | G10111 | 2 | Lock Nut, ½”-13 |
| 12 | GA5892 | 1 | Leveler |
| 13 | G10303 | 6 | Carriage Bolt, 5∕16″-18 x 1″ |
| 13 | G10219 | 4 | Washer, 5∕16″ USS |
| 13 | G10109 | 6 | Lock Nut, 5∕16″-18, Grade 8 |
| 14 | GD8266 | 2 | Blade |
ROW UNIT MOUNTED DISC FURROWER
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10536 | 1 | Detent Pin, ½” x 2 ½” Grip |
| 2 | G10597 | 1 | Square Head Set Screw, ⅝”-11 x 2 ¼” |
| 3 | G10503 | 1 | Hex Jam Nut, ⅝”-11, Grade 2 |
| 4 | GA5719 | 1 | Mounting Bracket |
| 5 | GD7889 | 6 | Bushing, 1″ O.D. x 9∕16″ I.D. x 7∕16″ Long |
| 6 | G10039 | 2 | Hex Head Cap Screw, ½”-13 x 1 ¾” |
| 6 | GD14674 | 2 | Special Washer, ½”, Hardened |
| 6 | G10111 | 2 | Lock Nut, ½”-13 |
| 7 | G10585 | 1 | Hex Head Cap Screw, ½”-13 x 3 ¼” |
| 7 | G10216 | 2 | Washer, ½” USS |
| 7 | G10111 | 1 | Lock Nut, ½”-13 |
| 8 | GD7890 | 2 | Link |
| 9 | G10017 | 2 | Hex Head Cap Screw, ½”-13 x 1 ½” |
| 9 | G10216 | 2 | Washer, ½” USS |
| 9 | G10111 | 2 | Lock Nut, ½”-13 |
| 10 | GA5715 | 1 | Anchor |
| 11 | G10017 | 2 | Hex Head Cap Screw, ½”-13 x 1 ½” |
| 11 | G10111 | 2 | Lock Nut, ½”-13 |
| 12 | GA5718 | 1 | Support Arm |
| 13 | G10572 | 6 | Truss Head Slotted Machine Screw, 5∕16″-18 x ⅞” |
| 13 | G10106 | 6 | Hex Nut, 5∕16″-18 |
| 14 | GD1132 | 2 | Dust Cap |
| 15 | G10318 | 2 | Hex Head Cap Screw, ⅝”-11 x 4 ½” |
| 15 | GD7805 | 2 | Special Washer, ⅝”, Hardened |
| 15 | G10107 | 2 | Lock Nut, ⅝”-11 |
| 16 | GA5654 | 2 | Hub W/Bearings |
| 16 | GA2014 | Bearing | |
| 17 | GD7823 | Disc Blade, Solid, 12″ (Shown) | |
| 17 | GD8307 | Disc Blade, Notched, 12″ | |
| 18 | GD7817-01 | 2 | Spacer, 11∕16″ I.D. x ¾” Long |
| 18 | GD7817-04 | 2 | Spacer, 11∕16″ I.D. x ½” Long |
ROW UNIT MOUNTED RESIDUE WHEEL
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD1132 | 1 | Dust Cap |
| 2 | GB0387 | 1 | Wheel, 12 Tine, ⅜” x 12″ |
| 3 | G10006 | 1 | Hex Head Cap Screw, ⅝”-11 x 2 ¼” |
| 4 | GD9724 | 1 | Backing Plate |
| 5 | G10133 | 6 | Hex Head Cap Screw, 5∕16″-18 x 1 ½” |
| 5 | G10109 | 6 | Lock Nut, 5∕16″-18, Grade 8 |
| 6 | GD9720 | 2 | Spacer, ½” x 2 3∕16″ Long |
| 7 | GA6838 | 1 | Wheel Mount |
| 8 | G10033 | 2 | Hex Head Cap Screw, ½”-13 x 3 ½” |
| 8 | G10228 | 2 | Lock Washer, ½” |
| 8 | G10102 | 2 | Hex Nut, ½”-13 |
| 9 | GD5857 | 2 | Spring |
| 10 | G10045 | 2 | Hex Head Cap Screw, ½”-13 x 4 ½” |
| 10 | G10228 | 2 | Lock Washer, ½” |
| 10 | G10102 | 2 | Hex Nut, ½”-13 |
| 11 | G10348 | 1 | Hex Head Cap Screw, ½”-13 x 5″ (Lockup Bolt) |
| 11 | G10111 | 1 | Lock Nut, ½”-13 |
| 12 | GD9715 | 2 | Spacer, ½” x 3″ Long |
| 13 | GA6834 | 1 | Lower Link |
| 14 | GA6832 | 1 | Mount |
| 15 | G10574 | 4 | Carriage Bolt, ½”-13 x 1 ¼” |
| 15 | G10111 | 4 | Lock Nut, ½”-13 |
| 16 | GA6833 | 1 | Upper Link |
| 17 | G10371 | 1 | Hex Head Cap Screw, ½”-13 x 3″, Full Thread |
| 17 | G10501 | 1 | Hex Jam Nut, ½”-13, Grade 2 |
| 18 | GA5654 | 1 | Hub W/Bearings |
| 18 | GA2014 | Bearing |
COULTER MOUNTED RESIDUE WHEELS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD1132 | 2 | Dust Cap |
| 2 | G10010 | 2 | Hex Head Cap Screw, ⅝”-11 x 3″ |
| 2 | G10503 | 2 | Hex Jam Nut, ⅝”-11, Grade 2 |
| 3 | GA12256 | 1 | Locking Pin |
| 4 | GA5654 | 2 | Hub W/Bearings |
| 4 | GA2014 | Bearing | |
| 5 | GA7412 | 1 | Cam |
| 6 | GD10519 | 1 | Spring |
| 7 | G10206 | 1 | Washer, ½” SAE |
| 8 | G10974 | 1 | Lock Nut W/Nylon Insert, ½”-13 |
| 9 | G11236 | 1 | Hex Head Cap Screw, ¾”-10 x 10 ½” |
| 9 | GB0383 | 2 | Bushing, 1 ⅛” O.D. x 25∕32″ I.D. x ¾” Long |
| 9 | G10194 | 2 | Washer, ¾” SAE |
| 9 | G11228 | 1 | Lock Nut, ¾”-10 |
| 10 | GB0401 | 1 | Mount |
| 11 | G10003 | 2 | Hex Head Cap Screw, ⅜”-16 x 1 ½” |
| 11 | G10229 | 2 | Lock Washer, ⅜” |
| 12 | G10213 | 2-4 | Machine Bushing, ⅝” (.030″ Thick) |
| 13 | GA8760 | 2 | Weed Guard W/Spring Pin |
| 13 | G10765 | Spring Pin, ¼” x 1″ | |
| 14 | G10133 | 12 | Hex Head Cap Screw, 5∕16″-18 x 1 ½” |
| 14 | G10109 | 12 | Lock Nut, 5∕16″-18, Grade 8 |
| 15 | GD9724 | 2 | Backing Plate |
| 16 | GB0387 | 2 | Wheel, 12 Tine, ⅜” x 12″ |
| 16 | GA12235 | Wheel Assembly, 12 Tine, L.H. (Items 3, 4, 14, And 15) |
FRAME MOUNTED COULTER W/RESIDUE WHEELS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G11010 | 2 | Hex Head Cap Screw, ¾”-10 x 12″ |
| 2 | GA9844 | 1 | Plate W/Angle |
| 3 | G10039 | 4 | Hex Head Cap Screw, ½”-13 x 1 ¾” |
| 4 | GA9131 | 1 | Coulter Frame |
| 5 | G10007 | 4 | Hex Head Cap Screw, ⅝”-11 x 1 ½” |
| 5 | G10107 | 4 | Lock Nut, ⅝”-11 |
| 6 | G10400 | 1 | Hex Head Cap Screw, ¾”-10 x 6 ½” |
| 6 | G10112 | 1 | Lock Nut, ¾”-10 |
| 7 | GD12826 | 1 | Spring Anchor Bar |
| 8 | G10574 | 4 | Carriage Bolt, ½”-13 x 1 ¼” |
| 8 | G10111 | 4 | Lock Nut, ½”-13 |
| 9 | GD12827 | 2 | Adapter |
| 10 | GA8641 | 1 | Hub W/Bearing And Retaining Ring |
| 10 | GA8603 | 1 | Bearing, Double Row |
| 10 | GD11652 | 1 | Retaining Ring, 2 7∕16″ |
| 11 | GD7803 | 1 | Disc Blade, Fluted, 1″, 8 Flutes (Shown) |
| 11 | GD7804 | Disc Blade, Bubbled, 1″ | |
| 11 | GD9254 | Disc Blade, Fluted, ¾”, 13 Flutes | |
| 12 | GB0213 | 2 | Spring Seat |
| 13 | GD12817 | 2 | Compression Spring |
| 14 | GD12829 | 1 | Sleeve |
| 15 | G10046 | 1 | Hex Head Cap Screw, ⅝”-11 x 5″ |
| 15 | G10107 | 1 | Lock Nut, ⅝”-11 |
| 16 | GA9845 | 1 | Coulter Arm W/Grease Fitting |
| 16 | G10643 | Grease Fitting, 45°, ¼”-28 | |
| 17 | G10011 | 1 | Hex Head Cap Screw, ⅝”-11 x 5 ½” |
| 17 | G10107 | 1 | Lock Nut, ⅝”-11 |
| 18 | GB0218 | 3 | Bushing, 21∕32″ I.D. x ⅞” O.D. x 19∕32″ Long |
| 19 | GD1132 | 2 | Dust Cap |
| 20 | G10010 | 2 | Hex Head Cap Screw, ⅝”-11 x 3″ |
| 20 | G10503 | 2 | Hex Jam Nut, ⅝”-11, Grade 2 |
| 21 | GB0386 | 2 | Wheel, 12 Tine, ⅜” x 12″ |
| 22 | GA5654 | 2 | Hub W/Bearings |
| 22 | GA2014 | Bearing | |
| 23 | GD9724 | 2 | Backing Plate |
| 24 | G10133 | 12 | Hex Head Cap Screw, 5∕16″-18 x 1 ½” |
| 24 | G10109 | 12 | Lock Nut, 5∕16″-18, Grade 8 |
| 25 | G10213 | 2 | Machine Bushing, ⅝” (.030″ Thick) |
| 26 | GA9862 | 2 | Weed Guard W/Spring Pin |
| 26 | G10765 | Spring Pin, ¼” x 1″ | |
| 27 | GA9865 | 1 | Mount |
| 28 | GA9861 | 1 | Cam |
| 29 | GD10519 | 1 | Spring |
| 30 | G10974 | 1 | Lock Nut W/Nylon Insert, ½”-13 |
| 31 | G10005 | 1 | Hex Head Cap Screw, ⅝”-11 x 1 ¾” |
| 31 | G10107 | 4 | Lock Nut, ⅝”-11 |
| 32 | GA9864 | 1 | Support |
| 33 | G10014 | 1 | Hex Head Cap Screw, ½”-13 x 1″ |
| 33 | G10102 | 1 | Hex Nut, ½”-13 |
| 34 | G10011 | 2 | Hex Head Cap Screw, ⅝”-11 x 5 ½” |
| 34 | G10205 | 2 | Washer, ⅝” SAE |
| 34 | G10730 | 2 | Lock Nut W/Nylon Insert, ⅝”-11 |
| 35 | GD14170 | 2 | Sleeve, 3″ |
| 35 | GA12235 | Wheel Assembly, 12 Tine, L.H. (Items 21, 22, 23, And 24) |
INTERPLANT®
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD1026 | 1 | Sleeve, 1 3∕16″ Long |
| 2 | GD11218 | 1 | Spring |
| 3 | G10201 | 1 | Special Washer, ⅜” x 1 ½” O.D. |
| 4 | GD8893-01 | 1 | Sleeve, 1 ⅜” Long |
| 5 | GD11962 | 1 | Idler |
| 6 | G10210 | 1 | Washer, ⅜” USS |
| 7 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 8 | G3303-96 | 1 | Chain, No. 41, 96 Pitch Including Connector Link |
| 8 | GR0196 | 1 | Connector Link, No. 41 |
| 9 | GA10161 | Push Row Unit Shank | |
| 10 | GB0314 | 2 | Hopper Mount |
| 11 | G10751 | 2 | Hex Head Cap Screw, ⅝”-18 x 1 ¾” |
| 11 | G10412 | 2 | Lock Nut, ⅝”-18 |
| 12 | G10599 | 1 | Carriage Bolt, ⅜”-16 x 1 ¼” |
| 12 | G10101 | 1 | Hex Nut, ⅜”-16 |
| 12 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 13 | G10307 | 1 | Carriage Bolt, ⅜”-16 x 3 ½” |
| 14 | GD10867 | 2 | Stop |
| 15 | G10004 | 4 | Hex Head Cap Screw, ⅜”-16 x 1 ¼” |
| 15 | G10108 | 4 | Lock Nut, ⅜”-16 |
| 16 | GB0301 | 1 | Seed Tube Guard/Inner Scraper |
| 17 | G10912 | 2 | Hex Socket Head Cap Screw, 5∕16″-18 x 1″, Grade 8 |
| 18 | G10751 | 4 | Hex Head Cap Screw, ⅝”-18 x 1 ¾” |
| 18 | GD7805 | 4 | Special Washer, ⅝”, Hardened |
| 18 | G10412 | 4 | Lock Nut, ⅝”-18 |
| 19 | GB0218 | 8 | Bushing, 21∕32″ I.D. x ⅞” O.D. x 19∕32″ Long |
| 20 | GA11969 | 1 | Upper Arm |
| 21 | GA5787 | 1 | Lower Arm |
| 22 | G10732 | 4 | Hex Head Cap Screw, ⅝”-18 x 2″ |
| 22 | GD7805 | 4 | Special Washer, ⅝”, Hardened |
| 22 | G10412 | 4 | Lock Nut, ⅝”-18 |
| 23 | GA1720 | 1 | Bearing/Sprocket, ⅞” Hex Bore |
| 24 | G10004 | 2 | Hex Head Cap Screw, ⅜”-16 x 1 ¼” |
| 24 | G10229 | 2 | Lock Washer, ⅜” |
| 24 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 25 | GA11971 | 1 | Mounting Plate |
| 26 | GA9105 | T-Bolt, ⅝”-11 x 6″ | |
| 26 | G10230 | Lock Washer, ⅝” | |
| 26 | G10104 | Hex Nut, ⅝”-11 | |
| 27 | G10718 | 2 | Spring Pin, 5∕16″ x 1 ⅛” |
| 28 | GD11264 | 2 | Lockup |
| 29 | G10463 | 2 | Cotter Pin, ¼” x 1 ½” |
| 30 | GD11447 | 2 | Spring |
| 31 | G10284 | 2 | Clevis Pin, ½” x 1 ½” |
| 31 | G10456 | 2 | Cotter Pin, ⅛” x ¾” |
| 32 | GD11263 | 2 | Spring Tab |
| 33 | G10216 | 2 | Washer, ½” USS |
| 34 | GA8651 | 1 | Lift Lever W/Boot |
| 34 | GD11649 | Boot | |
| 35 | GD18073 | 1 | Bracket (Lift Lever) |
| 36 | GD9695 | 1 | Wire Lock Pin, ¼” x 1 ¾” |
| 37 | GD18074 | 1 | Mount |
| 38 | G10203 | 1 | Washer, ⅜” SAE |
| 1 | GA2180 | Hanger Bearing, ⅞” Hex Bore | |
| 2 | G10004 | 2 | Hex Head Cap Screw, ⅜”-16 x 1 ¼” |
| 2 | G10229 | 2 | Lock Washer, ⅜” |
| 2 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 3 | G11243 | 1 | Slotted Flat Head Machine Screw, No. 8-32 x ½”, Stainless Steel |
| 4 | GR1894 | 1 | Air Housing Cover |
| 5 | GR1830 | 1 | Hex Bushing |
| 6 | GR1818 | 1 | Ratchet Gear |
| 7 | GR1813 | 1 | Clutch Spring |
| 8 | GR1829 | 1 | Sprocket Hub |
| 9 | GR1899 | 1 | Anti-Rotation |
| 10 | G11296 | 2 | Pan Head Machine Screw, ¼”-20 x ¾” x ¾” |
| 11 | GR1895 | 1 | Air Clutch Housing |
| 12 | GR1896 | 1 | Air Cylinder |
| 13 | GR1819 | 1 | Push Connect, ⅛” NPT Male x ¼” |
| 14 | GR1898 | 1 | Filter |
| 15 | G11295 | 1 | Retaining Ring |
| 16 | GR1831 | 1 | Sprocket, 19 Tooth |
| 17 | G11239 | 3 | Hex Head Cap Screw, 10-32 x ½” |
| 18 | GD18891 | 1 | Spacer, 1 ¼” O.D. x 1″ |
| 19 | GD11045 | Lock Clamp | |
| 20 | G10130 | Square Head Machine Bolt, 5∕16″-18 x 1 ¾” | |
| 20 | G10923 | Flange Nut, 5∕16″-18, No Serration | |
| 1 | G10233 | Machine Bushing, 1″, 10 Gauge (As Required) | |
| 2 | GD11045 | Lock Clamp | |
| 3 | G10130 | Square Head Machine Bolt, 5∕16″-18 x 1 ¾” | |
| 3 | G10923 | Flange Nut, 5∕16″-18, No Serration | |
| 4 | GA2180 | Hanger Bearing, ⅞” Hex Bore | |
| 5 | GD0914-55 | 1 | Hex Shaft, ⅞” x 55″ (No Holes), R.H. Side, 8 Row 36″/38″ |
| 5 | GD0914-84 | 1 | Hex Shaft, ⅞” x 84″ (No Holes), L.H. Side, 8 Row 36″/38″ |
| 5 | GD0914-48 | Hex Shaft, ⅞” x 48″ (No Holes), R.H. Side, 12 Row 30″ And 16 Row 30″ | |
| 5 | GD0914-66 | Hex Shaft, ⅞” x 66″ (No Holes), L.H. Side, 12 Row 30″ And 16 Row 30″ | |
| 6 | GD0914-49 | 1 | Hex Shaft, ⅞” x 49″ (No Holes), Both Sides, 8 Row 36″/38″ |
| 6 | GD0914-90 | Hex Shaft, ⅞” x 90″ (No Holes), Both Sides, 12 Row 30″ | |
| 6 | GD0914-124 | Hex Shaft, ⅞” x 124″ (No Holes), R.H. Side, 16 Row 30″ | |
| 6 | GD0914-138 | Hex Shaft, ⅞” x 138″ (No Holes), L.H. Side, 16 Row 30″ | |
| 7 | GD0914-24 | Hex Shaft, ⅞” x 24″ (No Holes), 12 Row 30″ W/Even-Row Push Row Unit | |
| 7 | GD0914-33 | Hex Shaft, ⅞” x 33″ (No Holes), 16 Row 30″ W/Even-Row Push Row Unit | |
| 8 | GA7053 | 1 | U-Joint W/Grease Fitting, Female, 18 ⅛” Long, 8 Row 36″/38″ And |
| 8 | GA7052 | U-Joint W/Grease Fitting, Female, 10 ¼” Long, 12 Row 30″ And | |
| 8 | GR1557 | Grease Fitting, 45°, Metric | |
| 8 | GR1297 | Inboard Yoke And Outer Profile (10 ¼” U-Joint) | |
| 8 | GR1298 | Inboard Yoke And Outer Profile (18 ⅛” U-Joint) | |
| 8 | GR1294 | Cross And Bearing Kit | |
| 8 | GR1293 | Yoke, ⅞” Hex | |
| 9 | G10004 | Hex Head Cap Screw, ⅜”-16 x 1 ¼” | |
| 9 | G10210 | Washer, ⅜” USS | |
| 9 | G10229 | Lock Washer, ⅜” | |
| 9 | G10101 | Hex Nut, ⅜”-16 | |
| 10 | G10496 | 2 | External Inverted Snap Ring, 1 ½” |
| 11 | G10968 | 1 | Spring Pin, 5∕32″ x 7∕16″ |
| 12 | GR1405 | 1 | Lock Collar |
| 13 | GR1413 | 1 | Spring |
| 14 | GR1407 | 1 | Drive Shaft |
| 15 | GR1411 | 1 | Shim |
| 16 | GR1406 | 1 | Bushing |
| 17 | GR1412 | 1 | Sprocket, 19 Tooth |
| 18 | G10535 | 1 | Hex Socket Set Screw, ⅜”-16 x ¾” |
| 19 | GR1410 | 1 | Pin |
| 20 | GR1409 | 1 | Knurled Collar |
| 21 | GR1408 | 1 | Compression Spring |
| 22 | GD8306 | 2 | U-Bolt, 7″ x 5″ x ½”-13 |
| 22 | G10228 | 4 | Lock Washer, ½” |
| 22 | G10102 | 4 | Hex Nut, ½”-13 |
| 23 | GD18094 | 2 | Plate (Shown) |
| 23 | GD18066 | Plate | |
| 24 | G3310-226 | 1 | Chain, No. 40, 226 Pitch Including Connector Link |
| 24 | GR0912 | Connector Link, No. 40 | |
| 25 | GD18067 | 1 | Brace |
| 26 | GA7154 | 4 | Sprocket W/Bearing, 18 Tooth |
| 27 | G10016 | 4 | Hex Head Cap Screw, ½”-13 x 2″ |
| 27 | G10206 | 8 | Washer, ½” SAE |
| 27 | G10228 | 4 | Lock Washer, ½” |
| 27 | G10102 | 4 | Hex Nut, ½”-13 |
| 28 | G10016 | 2 | Hex Head Cap Screw, ½”-13 x 2″ |
| 28 | G10216 | 2 | Washer, ½” USS |
| 28 | G10228 | 2 | Lock Washer, ½” |
| 28 | G10102 | 2 | Hex Nut, ½”-13 |
| 29 | GA5107 | 2 | Sprocket, 19 Tooth |
| 30 | GD11972 | Support Angle, R.H. | |
| 31 | GD11973 | Support Angle, L.H. | |
| 32 | GD1113 | U-Bolt, 5″ x 7″ x ⅝”-11 | |
| 32 | G10230 | Lock Washer, ⅝” | |
| 32 | G10104 | Hex Nut, ⅝”-11 | |
| 33 | GD1719 | Coupler, 4″ | |
| 34 | GA7051 | 1 | U-Joint W/Grease Fitting, Male, 12 ¼” Long |
| 34 | GR1557 | Grease Fitting, 45°, Metric | |
| 34 | GR1296 | Inner Profile | |
| 34 | GR1295 | Inboard Yoke | |
| 34 | GR1301 | Spring Pin, 8 mm x 50 mm | |
| 34 | GR1294 | Cross And Bearing Kit | |
| 34 | GR1293 | Yoke, ⅞” Hex | |
| 35 | G10752 | Hex Head Cap Screw, ⅝”-18 x 2 ¼” | |
| 35 | GD7805 | Special Washer, ⅝”, Hardened | |
| 35 | G10412 | Lock Nut, ⅝”-18 | |
| 36 | G10688 | Square Head Set Screw, ⅜”-16 x ⅝” |
DIGITAL VACUUM GAUGE, ANALOG VACUUM GAUGE AND
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GA11154 | 1 | Digital Vacuum Gauge W/4-Pin Connector |
| 2 | GA11156 | 1 | Sending Unit W/¼” Tubing And Harness W/4-Pin Male Connector |
| 2 | GD16324-01 | Clear Plastic Tubing, ¼” x 45″ | |
| 2 | GA9964 | Strain Relief | |
| 3 | GR1736 | 1 | Hose Barb, ⅛” Male NPT To Barb |
| 4 | GD15849-02 | 1 | Clear Tubing, 5∕16″ O.D. x 3∕16″ I.D. x 120″ |
| 5 | GA10765 | 1 | Analog Vacuum Gauge W/Hose Barb |
| 5 | GR1777 | Hose Barb, ⅛” Male NPT To 3∕16″ Barb | |
| 6 | GA10799 | 1 | Breather, ⅛” Male NPT |
| 7 | G10001 | 1 | Hex Head Cap Screw, ⅜”-16 x 1″ |
| 7 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 8 | G11215 | 3 | Hex Socket Head Cap Screw, No. 6-32 x ⅜”, Grade 8 |
| 9 | GD15804 | 1 | Mount |
| 10 | GD15803 | 1 | Support |
| 11 | GA11159 | 1 | Harness, 550″, 8 Row 36″/38″ And 12 Row 30″ |
| 11 | GA11160 | Harness, 670″, 12 Row 36″/38″ And 16 Row 30″ | |
| 12 | GA11699 | Extension Harness, 180″ | |
| 13 | GA7856 | Power Lead Adapter | |
| 14 | GA11155 | 1 | Harness W/Fuse Holder And Fuse, 132″ |
| 14 | GD14258 | Fuse Holder | |
| 14 | GD14660 | Fuse, 2 Amp Delay Action | |
| 14 | G1K268 | Console Cable Connector Kit, Includes: (1) 3-Pin Connector, | |
| 15 | GA8328 | 4-Pin Female Connector Kit, Includes: (1) 4-Pin Female Housing, (4) Pin | |
| 16 | GA8329 | 4-Pin Male Connector Kit, includes: (1) 4-Pin Male Housing, (4) Sockets, | |
| 17 | G11166 | 6 | Whiz Lock Bolt, ¼”-20 x ¾” |
| 18 | GD16233 | 1 | Manifold |
| 19 | GD16241 | 1 | Gasket |
| 20 | G11124 | 7 | Whiz Lock Bolt, ⅜”-18 x 1″ |
| 21 | GA11086 | 1 | Cover |
| 22 | G10063 | 2 | Hex Head Cap Screw, ⅜”-16 x 4″ |
| 22 | G10203 | 2 | Washer, ⅜” SAE |
| 22 | G10108 | 2 | Lock Nut, ⅜”-16 |
| 23 | GD15863 | 1 | Discharge Deflector |
| 24 | GA11987 | 2 | Screen |
| 25 | GD15790 | 1 | Hub |
| 26 | GA10635 | 1 | Impeller |
| 27 | GD15789 | 1 | Backing Plate |
| 28 | G11133 | 6 | Hex Socket Head Cap Screw, 5∕16″-18 x ¾”, Grade 8 |
| 29 | G10599 | 2 | Carriage Bolt, ⅜”-16 x 1 ¼” |
| 29 | G10229 | 2 | Lock Washer, ⅜” |
| 29 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 31 | GA11085 | 1 | Shroud |
| 33 | G10205 | 1 | Washer, ⅝” SAE |
| 33 | G10499 | 1 | Hex Jam Nut, ⅝”-18, Grade 2 |
| 34 | G10809 | 2 | Hex Head Cap Screw, ⅜”-16 x 3 ¼” |
| 34 | G10229 | 2 | Lock Washer, ⅜” |
VACUUM FAN HYDRAULIC COMPONENTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 7 | GD4086 | 3 | ISO Coupler |
| 16 | G306-06 | 1 | Lock Nut, 9∕16″-18 |
| 17 | G2700-06-06 | 1 | Bulkhead Tube Union, 9∕16″-18 Male JIC |
| 18 | G306-12 | 1 | Lock Nut, 1 1∕16″-12 |
| 19 | G2700-12 | 1 | Bulkhead Tube Union, 1 1∕16″-12 Male JIC |
| 20 | G306-10 | 1 | Lock Nut, ⅞”-14 |
| 21 | G2700-10 | 1 | Bulkhead Tube Union, ⅞”-14 Male JIC |
VACUUM FAN HYDRAULIC MOTOR ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GA10149 | 1 | Hydraulic Motor |
| 1 | GR1734 | Seal Kit | |
| 2 | G6801-10-12 | 1 | Elbow W/O-Ring, 90°, ⅞”-14 Male JIC To 1 1∕16″-12 O-Ring |
| 2 | GR1467 | O-Ring | |
| 3 | G6801-12 | 1 | Elbow W/O-Ring, 90°, 1 1∕16″-12 Male JIC To O-Ring |
| 3 | GR1467 | O-Ring | |
| 4 | G6500-06 | 1 | Swivel Elbow, 90°, 9∕16″-18 Male JIC To Female |
| 5 | G6400-06 | 1 | Connector W/O-Ring, 9∕16″-18 Male JIC To O-Ring |
| 5 | GR1045 | O-Ring | |
| 1 | G1K426 | Needle Valve Kit W/Instructions |
VACUUM FAN MOTOR VALVE BLOCK ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GA4293 | 1 | Check Valve |
| 2 | G6408-06 | 1 | Plug W/O-Ring, 9∕16″-18 O-Ring |
| 2 | GR1045 | O-Ring | |
| 3 | G6408-12 | 1 | Plug W/O-Ring, 1 1∕16″-12 O-Ring |
| 3 | GR1467 | O-Ring | |
| 4 | G6400-10 | 2 | Connector W/O-Ring, ⅞”-14 Male JIC To O-Ring |
| 4 | GR1466 | O-Ring | |
| 5 | G6400-06 | 2 | Connector W/O-Ring, 9∕16″-18 Male JIC To O-Ring |
| 5 | GR1045 | O-Ring | |
| 6 | G6400-12 | 2 | Connector W/O-Ring, 1 1∕16″-12 Male JIC To O-Ring |
| 6 | GR1467 | O-Ring | |
| 7 | GD16188 | 1 | Valve Block |
| 8 | GA11934 | 1 | Relief Valve Cartridge |
| 9 | G10809 | 2 | Hex Head Cap Screw, ⅜”-16 x 3 ¼” |
| 9 | G10229 | 2 | Lock Washer, ⅜” |
| 10 | GD11700 | 1 | Adapter, ¼” NPT To ⅜” Barb |
| 11 | G10681 | 1 | Hose Clamp, No. 6 |
| 12 | GD6279-05 | 1 | Clear Plastic Tubing, 9∕16″ O.D. x 60″ |
MANIFOLDS AND DISTRIBUTION HOSES
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD15850 | 3 | Manifold, 21″ (Open One End) |
| 2 | GD15856-03 | 2 | Pipe, 6″ x 11″, 8 Row 36″/38″ |
| 2 | GD15856-04 | 2 | Pipe, 6″ x 6″, 12 Row 30″ |
| 2 | GD15856-03 | 4 | Pipe, 6″ x 11″, 12 Row 30″ |
| 2 | GD15856-03 | 10 | Pipe, 6″ x 11″, 16 Row 30″ |
| 3 | GD15854 | 7-15 | Clamp |
| 4 | G10312 | 7-15 | Carriage Bolt, 5∕16″-18 x ¾” |
| 4 | G10620 | 7-15 | Serrated Flange Nut, 5∕16″-18 |
| 5 | GA11164 | 7-15 | Mount |
| 6 | GD15799 | 4-12 | Manifold, 21″ (Open Both Ends) |
| 7 | G11147 | Cap, 2″ | |
| 8 | G11145 | 7-23 | T-Bolt Clamp, 7″ |
| 9 | G11194 | 4 | T-Bolt Clamp, 7 ¼” |
| 10 | GD16317-01 | 2 | Hose, 7″ x 21″ |
| 11 | GA12259 | 1 | Manifold, 33 ¼”, 8 Row 36″/38″ |
| 11 | GA12249 | 1 | Manifold, 21 ¾”, 12 Row 30″ And 16 Row 30″ |
| 12 | GA11203 | 1 | Manifold, 33 7∕16″, 8 Row 36″/38″ |
| 12 | GA11166 | 1 | Manifold, 21 15∕16″, 12 Row 30″ And 16 Row 30″ |
| 13 | G11188 | 4 | T-Bolt Clamp, 5 ¼” |
| 14 | GA11119 | 1 | Fan Mount |
| 15 | G10543 | 2 | Hex Head Cap Screw, ¾”-10 x 3″, Full Thread |
| 15 | G10218 | 2 | Washer, ¾” USS |
| 15 | G10105 | 2 | Hex Nut, ¾”-10 |
| 16 | G10830 | 2 | Hex Head Cap Screw, ⅝”-11 x 7 ½” |
| 16 | G10230 | 2 | Lock Washer, ⅝” |
| 16 | G10104 | 2 | Hex Nut, ⅝”-11 |
| 17 | GD3180-27 | 2 | Sleeve, ⅝” I.D. x ⅞” O.D. x 5 ¾” Long |
| 17 | GD3777-10 | 2 | Sleeve, 1 ¾” x 3 ⅛” |
| 17 | GD3777-11 | 2 | Sleeve, 1 ¾” x 2 ½” |
| 18 | GD15792-13 | Hose, 2″ x 50″ (Pull Row Unit And Even-Row Push Row Unit) | |
| 18 | GD15792-05 | Hose, 2″ x 38″ (Push Row Unit) | |
| 18 | GD15792-12 | Hose, 2″ x 44″ (Push Row Unit) | |
| 18 | GD15792-06 | Hose, 2″ x 42″ (Push Row Unit) | |
| 19 | GD14626 | 16-32 | Elbow, 90°, 2″ |
| 20 | G10003 | 2 | Hex Head Cap Screw, ⅜”-16 x 1 ½” |
| 20 | G10210 | 3 | Washer, ⅜” USS |
| 20 | G10229 | 2 | Lock Washer, ⅜” |
| 20 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 22 | G10318 | 1 | Hex Head Cap Screw, ⅝”-11 x 4 ½” |
| 22 | G10230 | 2 | Lock Washer, ⅝” |
| 22 | G10104 | 2 | Hex Nut, ⅝”-11 |
| 23 | GA11152 | 1 | Fan Strut |
| 24 | G10543 | 2 | Hex Head Cap Screw, ¾”-10 x 3″, Full Thread |
| 24 | G10105 | 2 | Hex Nut, ¾”-10 |
| 25 | GD16295 | 2 | Support |
| 26 | G10953 | 1 | Hex Head Cap Screw, ⅝”-11 x 10″ |
| 26 | G10218 | 2 | Washer, ¾” USS |
| 26 | G10230 | 1 | Lock Washer, ⅝” |
| 26 | G10104 | 1 | Hex Nut, ⅝”-11 |
| 27 | GD15867-02 | 2 | Hose, 5″ x 48″ |
| 28 | G10019 | 24-36 | Hex Head Cap Screw, 5∕16″-18 x 1″ |
| 28 | G10232 | 24-36 | Lock Washer, 5∕16″ |
| 28 | G10106 | 24-36 | Hex Nut, 5∕16″-18 |
| 29 | GD16315 | 8-10 | Support, 21 ½” |
| 30 | GD16316 | 8-10 | Spacer, 1 ½” x 9″ |
| 31 | GD16307 | 1 | Manifold Rail, 37 ½”, L.H. Main Frame, 12 Row 30″ And 16 Row 30″ |
| 31 | GD16306 | 1 | Manifold Rail, 36 ½”, R.H. Main Frame, 12 Row 30″ And 16 Row 30″ |
| 31 | GD16359 | 1 | Manifold Rail, 47 ¾”, L.H. Main Frame, 8 Row 36″/38″ |
| 31 | GD16360 | 1 | Manifold Rail, 47 ¾”, R.H. Wing, 8 Row 36″/38″ |
| 32 | GD16360 | 1 | Manifold Rail, 47 ¾”, R.H. Wing, 8 Row 36″/38″ |
| 32 | GD16359 | 1 | Manifold Rail, 47 ¾”, L.H. Wing, 8 Row 36″/38″ |
| 32 | GD16305 | 2 | Manifold Rail, 87 ½”, L.H. And R.H. Wing, 12 Row 30″ |
| 32 | GD16319 | 2 | Manifold Rail, 142 ½”, L.H. And R.H. Wing, 16 Row 30″ |
| 33 | GD16251 | 2 | Gasket |
| 34 | GA11153 | 2 | Outlet, 5″ |
| 35 | G10023 | 12 | Hex Head Cap Screw, ¼”-20 x ¾” |
| 35 | G10110 | 12 | Lock Nut, ¼”-20, Grade B |
| 36 | GD11721 | 8-10 | U-Bolt, 5″ x 7″ x ½”-13 |
| 36 | G10228 | 16-20 | Lock Washer, ½” |
| 36 | G10102 | 16-20 | Hex Nut, ½”-13 |
| 37 | G10676 | Hose Clamp, No. 36, Stainless Steel | |
| 38 | GD16194-01 | Tube, 6 ⅝” x 2″ |
PTO PUMP DRIVE AND OIL COOLER OPTION
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10005 | 1 | Hex Head Cap Screw, ⅝”-11 x 1 ¾” |
| 1 | G10217 | 2 | Washer, ⅝” USS |
| 1 | G10107 | 1 | Lock Nut, ⅝”-11 |
| 2 | G3302-09 | 1 | Coil Chain, No. 9/0, 17 Links |
| 3 | GD16035 | 1 | Eyebolt, ⅜”-16 x 4″ |
| 3 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 4 | GD16036 | 1 | Anti-Rotation Bracket |
| 5 | G10001 | 2 | Hex Head Cap Screw, ⅜”-16 x 1″ |
| 5 | G10229 | 2 | Lock Washer, ⅜” |
| 6 | GA10919 | 1 | PTO Pump |
| 7 | G6801-10-12 | 1 | Elbow W/O-Ring, 90°, ⅞”-14 Male JIC To 1 1∕16″-12 O-Ring |
| 7 | GR1467 | O-Ring | |
| 8 | G6801-16 | 1 | Elbow W/O-Ring, 90°, 1 5∕16″-12 Female JIC To O-Ring |
| 8 | GR1786 | O-Ring | |
| 11 | G2501-16-20 | 1 | Elbow, 90°, 1 5∕16″-12 Male JIC To 1 ¼” NPT |
| 12 | G2501-12-16 | 1 | Elbow, 90°, 1 1∕16″-12 Male JIC To 1″ NPT |
| 14 | GA12802 | 1 | Reservoir W/Breather, 10 Gallon |
| 14 | GR1834 | Breather | |
| 15 | GD16040 | 1 | Strainer |
| 16 | G6500-12 | 2 | Swivel Elbow, 90°, 1 1∕16″-12 Male JIC To Female |
| 17 | G6804-12-12-08 | 1 | Adjustable Tee W/O-Ring, 1 1∕16″-12 Male JIC To 1 1∕16″-12 Male O-Ring To ¾”-16 |
| 17 | GR1467 | O-Ring | |
| 19 | G10023 | 2 | Hex Head Cap Screw, ¼”-20 x ¾” |
| 19 | G10227 | 2 | Lock Washer, ¼” |
| 20 | GD16038 | 1 | Filter Head |
| 21 | GD16037 | 1 | Oil Filter, 10 Micron |
| 22 | G6804-12 | 1 | Adjustable Tee W/O-Ring, 1 1∕16″-12 Male JIC To O-Ring |
| 22 | GR1467 | O-Ring | |
| 23 | G10171 | 4 | Hex Head Cap Screw, 5∕16″-18 x 1 ¼” |
| 23 | G10219 | 8 | Washer, 5∕16″ USS |
| 23 | G10109 | 4 | Lock Nut, 5∕16″-18, Grade 8 |
| 26 | G6801-12-10 | 1 | Elbow W/O-Ring, 90°, 1 1∕16″-12 Male JIC To ⅞”-14 O-Ring |
| 26 | GR1466 | O-Ring | |
| 27 | GA10918 | 1 | Flow Control Valve |
| 28 | G10403 | 2 | Hex Head Cap Screw, ¼”-20 x 2 ½” |
| 28 | G10209 | 4 | Washer, ¼” USS |
| 28 | G10110 | 2 | Lock Nut, ¼”-20, Grade 8 |
| 29 | G6801-10 | 1 | Elbow W/O-Ring, 90°, ⅞”-14 Male JIC To O-Ring |
| 29 | GR1466 | O-Ring | |
| 31 | G6400-10 | 1 | Connector W/O-Ring, ⅞”-14 Male JIC To O-Ring |
| 31 | GR1466 | O-Ring | |
| 32 | GA11523 | 1 | Mounting Bracket |
| 33 | G10001 | 2 | Hex Head Cap Screw, ⅜”-16 x 1″ |
| 33 | G10210 | 4 | Washer, ⅜” USS |
| 33 | G10108 | 4 | Lock Nut, ⅜”-16 |
| 34 | GA11544 | 4 | Bracket, 12″, 8 Row 36″/38″ And 12 Row 30″ |
| 35 | G10148 | 4 | Hex Head Cap Screw, ½”-13 x 9 ½” |
| 35 | G10228 | 4 | Lock Washer, ½” |
| 35 | G10102 | 4 | Hex Nut, ½”-13 |
| 36 | GD16644 | 4 | Bracket, 14 ½”, 16 Row 30″ |
| 37 | G11158 | 4 | Hex Head Cap Screw, ½”-13 x 11 ½” |
| 37 | G10228 | 4 | Lock Washer, ½” |
| 37 | G10102 | 4 | Hex Nut, ½”-13 |
| 38 | G6400-12 | 2 | Connector W/O-Ring, 1 1∕16″-12 Male JIC To O-Ring |
| 38 | GR1467 | O-Ring | |
| 39 | GA10917 | 1 | Oil Cooler |
| 40 | GD16608 | 1 | Bracket |
| 43 | G6502-12 | 1 | Swivel Elbow, 45°, 1 1∕16″-12 Male JIC To Female |
OUTER HITCH/SAFETY CHAIN
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GB0237 | 1 | Clevis, Single (1 ¾” Hole) |
| 2 | GA9837 | Hitch Mount, 16 Row 30″ | |
| 3 | G10169 | 1 | Hex Head Cap Screw, 1 ¼”-7 x 6″ |
| 3 | G10157 | 1 | Lock Nut, 1 ¼”-7 |
| 4 | G10802 | 11 | Hex Head Cap Screw, ¾”-10 x 2 ¾” |
| 4 | G10231 | 11 | Lock Washer, ¾” |
| 4 | G10105 | 11 | Hex Nut, ¾”-10 |
| 5 | GD5173 | 1 | Pin, 1 ¼” x 5 ⅛” |
| 5 | G10462 | 2 | Cotter Pin, 3∕16″ x 2″ |
| 6 | G10009 | 9 | Hex Head Cap Screw, ⅝”-11 x 2 ½” |
| 6 | G10230 | 9 | Lock Washer, ⅝” |
| 6 | G10104 | 9 | Hex Nut, ⅝”-11 |
| 7 | GA4994 | 1 | Jack Assembly Complete |
| 7 | GA4995 | Detent Pin Assembly | |
| 7 | GR0517 | Pin | |
| 7 | GR0516 | Crank Assembly | |
| 7 | GR0515 | Bevel Gear Set, Includes: (2) Bevel Gears, (1) Gear Pin, (1) Groove Pin | |
| 8 | GA9836 | 1 | Hitch Mount, 8 Row 36″/38″ And 12 Row 30″ (“Y” Hitch Only) |
| 9 | GD8260 | 1 | Hose Holder |
| 10 | GA7022 | 1 | Detent Pin W/Chain (Transport Latch Locking Pin) |
| 12 | G10006 | 1 | Hex Head Cap Screw, ⅝”-11 x 2 ¼” |
| 12 | GB0218 | 1 | Bushing, 21∕32″ I.D. x ⅞” O.D. x 19∕32″ Long |
| 12 | GD7805 | 1 | Special Washer, ⅝”, Hardened |
| 12 | G10107 | 1 | Lock Nut, ⅝”-11 |
| 13 | GA7016 | 1 | Catch Bar |
| 14 | GD5857 | 1 | Spring |
| 15 | GA7433 | 1 | Transport Latch |
| 16 | G10765 | Spring Pin, ¼” x 1″ | |
| 17 | G10062 | 1 | Hex Head Cap Screw, ⅜”-16 x 3″ |
| 17 | GD2971-09 | 1 | Sleeve, 2″ Long |
| 17 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 18 | G10216 | 1 | Washer, ½” USS |
| 18 | G10217 | 1 | Washer, ⅝” USS |
| 18 | G10111 | 1 | Lock Nut, ½”-13 |
| 19 | GD7137 | 1 | Pin, ¾” x 3 ⅜” |
| 19 | G10457 | 2 | Cotter Pin, 5∕32″ x 1 ½” |
| 20 | GD8188 | Hose Clamp, ⅞” x 3″ x 5 ⅜” | |
| 20 | GD8189 | Rubber Pad | |
| 21 | GD5892 | 2 | Hose Clamp, ⅝” x 1 ½” x 1 ½” |
| 22 | GD9953 | 3 | U-Bolt, 3″ x 4″ x ⅝”-11 |
| 22 | G10205 | 1 | Washer, ⅝” SAE |
| 22 | G10230 | 6 | Lock Washer, ⅝” |
| 22 | G10104 | 6 | Hex Nut, ⅝”-11 |
| 24 | GA4418 | 1 | Roller W/Bronze Bushings, 8 Row 36″/38″ “Y”, 12 Row 30″ “Y” Hitch |
| 24 | GA4842 | Roller W/Bronze Bushings, 12 Row 30″ “T” Hitch And 16 Row 30″ “Y” | |
| 24 | GD6556 | 1 | Bronze Bushing |
| 25 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 26 | G10111 | 1 | Lock Nut, ½”-13 |
| 27 | G10026 | 1 | Hex Head Cap Screw, ¾”-10 x 2″ |
| 27 | G10112 | 1 | Lock Nut, ¾”-10 |
| 28 | GA5842 | 1 | Bracket, Jack Mount |
| 28 | GD8189 | Rubber Pad | |
| 29 | GA4402 | 1 | Safety Pin, 12 ¾”, 8 Row 36″/38″ And 12 Row 30″ (“Y” Hitch Only) |
| 29 | GA4845 | Safety Pin, 14 ¾”, 16 Row 30″ | |
| 29 | GD2558 | Lynch Pin, ¼” | |
| 29 | GD2557 | Lynch Pin, 7∕16″ | |
| 30 | G10014 | 4 | Hex Head Cap Screw, ½”-13 x 1″ |
| 30 | G10228 | 4 | Lock Washer, ½” |
| 31 | G10017 | 8 | Hex Head Cap Screw, ½”-13 x 1 ½”, 8 Row 36″/38″ And 12 Row 30″ |
| 31 | G10016 | 10 | Hex Head Cap Screw, ½”-13 x 2″, 16 Row 30″ |
| 31 | G10228 | 8-10 | Lock Washer, ½” |
| 31 | G10102 | 8-10 | Hex Nut, ½”-13 |
| 32 | GA7029 | 2 | Wear Mount, 8 Row 36″/38″ And 12 Row 30″ (“Y” Hitch Only) |
| 32 | GA7084 | Wear Mount, L.H., 16 Row 30″ | |
| 32 | GA7085 | Wear Mount, R.H., 16 Row 30″ | |
| 32 | GA7083 | Wear Pad Retainer, 16 Row 30″ | |
| 33 | GD5154 | Shim, 4″ x 4″ (As Required), All Sizes | |
| 33 | GD3501 | Shim, 4″ x 6″ (As Required), 16 Row 30″ | |
| 34 | GD9959 | Wear Pad, Nylatron, 4″ x 4″ (As Required), All Sizes | |
| 34 | GD9960 | Wear Pad, Nylatron, 4″ x 6″ (As Required), 16 Row 30″ | |
| 35 | GD7519 | 3 | Shim, 16 Gauge (16 Row 30″ Only) |
| 35 | GD7518 | 1 | Shim, ⅜” (16 Row 30″ Only) |
| 36 | G10014 | 4 | Hex Head Cap Screw, ½”-13 x 1″ |
| 36 | G10228 | 4 | Lock Washer, ½” |
| 36 | G10216 | 4 | Washer, ½” USS |
| 37 | A7835 | Outer Hitch, “Y”, 73″, 8 Row 36″/38″ (Non-Stock Item) | |
| 37 | A7010 | Outer Hitch, “Y”, 97″, 12 Row 30″ (Non-Stock Item) | |
| 37 | A7061 | Outer Hitch, “T”, 121″, 12 Row 30″ (Non-Stock Item) | |
| 37 | A7088 | Outer Hitch, “Y”, 127 ½”, 16 Row 30″ (Non-Stock Item) | |
| 37 | A7073 | Outer Hitch, “T”, 151 ½”, 16 Row 30″ (Non-Stock Item) | |
| 38 | GD5804 | 1 | Pin, 1 ¼” x 12″, 8 Row 36″/38″ “Y”, 12 Row 30″ “Y” Hitch |
| 38 | GD7251 | 1 | Pin, 1 ¼” x 14″, 12 Row 30″ “T” Hitch And 16 Row 30″ “Y” |
| 38 | G10610 | 2 | Spring Pin, ⅜” x 2″ |
| 39 | GA7533 | 1 | Safety Chain, ½” |
| 39 | G1K412 | Safety Chain Repair Kit, Includes (1) Hook, (1) Flat Washer, (1) Latch Pin, | |
| 40 | G11058 | 1 | Hex Head Cap Screw, 1 ¼”-7 x 3″ |
| 40 | GD10646 | 1 | Special Washer |
| 40 | G10226 | 1 | Washer, 1 ¼” SAE |
| 40 | G10157 | 1 | Lock Nut, 1 ¼”-7 |
| 41 | GD14121 | 1 | Hose Clamp, ⅞” x 3 ½” |
| 42 | GA11528 | 1 | Bracket |
| 43 | GD16642 | 2 | U-Bolt, 3″ x 4″ x ½”-13 |
| 43 | G10228 | 4 | Lock Washer, ½” |
| 43 | G10102 | 4 | Hex Nut, ½”-13 |
| 44 | GB0292 | Hitch Clevis, Single (2″ Pin) |
2-POINT HITCH OPTION
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GA11079 | 2 | Hammer Strap, Category 3N And 3 |
| 2 | G10007 | 2 | Hex Head Cap Screw, ⅝”-11 x 1 ½” |
| 2 | G10230 | 2 | Lock Washer, ⅝” |
| 3 | GA12164 | 1 | Hitch Bar |
| 4 | GA12165 | 1 | Pivot Mount |
| 5 | GA11082 | 1 | Pivot Bolt W/Grease Fitting, 1 ¾” x 10 ⅜” (Total Length) |
| 5 | G10640 | Grease Fitting, ¼”-28 | |
| 5 | GD16303 | 2 | Washer, 3″ O.D. x 1 25∕32″ x ¼” Thick |
| 5 | GD16226 | 1 | Sleeve, 3″ O.D. x 1 25∕32″ x 29∕32″ Thick |
| 6 | G10005 | 1 | Hex Head Cap Screw, ⅝”-11 x 1 ¼” |
| 6 | G10217 | 1 | Washer, ⅝” USS |
| 7 | GD15100 | 1 | Pivot Lock |
| 8 | GA12163 | 1 | Pin, 13 ⅜” |
| 9 | GA11083 | 1 | Hitch Pivot W/Bushings And Grease Fittings |
| 9 | GD14562 | 2 | Hardened Bushing, 2 ¾” O.D. x 2 ¼” I.D. x 3″ |
| 9 | G10779 | 2 | Grease Fitting, 90°, ¼”-28 |
| 9 | G10118 | 1 | Lock Washer, 1″ |
| 9 | GD17245 | 1 | Washer, 4″ O.D. x 1 1∕32″ I.D. x ⅜” |
| 11 | G10169 | 2 | Hex Head Cap Screw, 1 ¼”-7 x 6″ |
| 11 | G10157 | 2 | Lock Nut, 1 ¼”-7 |
| 12 | GD15725 | 1 | Washer, 4″ O.D. x 2 ¼” I.D. x ¼” |
INNER HITCH, “Y
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10014 | 4 | Hex Head Cap Screw, ½”-13 x 1″, |
| 1 | G10017 | 4 | Hex Head Cap Screw, ½”-13 x 1 ½”, 16 Row 30″ |
| 1 | G10228 | 4 | Lock Washer, ½”, 16 Row 30″ |
| 2 | GD9959 | 2 | Wear Pad, Nylatron, 4″ x 4″ |
| 2 | GD5154 | 4-6 | Shim, 4″ x 4″ |
| 3 | G10894 | External Washer | |
| 4 | GD3537-17 | 1 | Shaft, 1 ¼” x 6 ⅜”, 8 Row 36″/38″ And 12 Row 30″ |
| 4 | GD3537-18 | Shaft, 1 ¼” x 7 ⅜”, 16 Row 30″ | |
| 5 | GA7423 | 1 | Tongue Hook W/Grease Fittings, 8 Row 36″/38″ And 12 Row 30″ |
| 5 | GA7424 | Tongue Hook W/Grease Fittings,16 Row 30″ | |
| 5 | G10641 | Grease Fitting, ⅛” NPT | |
| 6 | GD5804 | 1 | Pin, 1 ¼” x 12″, 8 Row 36″/38″ And 12 Row 30″ |
| 6 | GD7883 | Pin, 1 ¼” x 14 ½”, 16 Row 30″ | |
| 6 | G10468 | 2 | Cotter Pin, ⅜” x 2″ |
| 7 | GD8188 | Hose Clamp, ⅞” x 3″ x 5 ⅜” | |
| 7 | GD8189 | Rubber Pad | |
| 9 | G11169 | 1 | Hex Head Cap Screw, ½”-13 x 3 ½” |
| 9 | G10111 | 1 | Lock Nut, ½”-13 |
| 10 | G10004 | 1 | Hex Head Cap Screw, ⅜”-16 x 1 ¼” |
| 10 | G10229 | 1 | Lock Washer, ⅜” |
| 10 | G10101 | 1 | Hex Nut, ⅜”-16 |
| 11 | GD10650 | 1 | Hose Clamp |
| 12 | G10003 | 1 | Hex Head Cap Screw, ⅜”-16 x 1 ½” |
| 12 | G10210 | 1 | Washer, ⅜” USS |
| 12 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 13 | GD10664 | 1 | Shield (If Applicable) |
| 14 | GD5173 | 1 | Pin, 1 ¼” x 5 ⅛” |
| 14 | G10462 | 1 | Cotter Pin, 3∕16″ x 2″ |
| 15 | G10131 | 1 | Square Head Set Screw, 5∕16″-18 x ¾” |
| 16 | GB0246 | 1 | Shoe |
| 17 | GD3537-11 | 1 | Shaft, 1 ¼” x 7″, 8 Row 36″/38″ And 12 Row 30″ |
| 17 | GD3537-12 | Shaft, 1 ¼” x 8″, 16 Row 30″ | |
| 18 | A7427 | Inner Hitch, 145 ⅜”, 8 Row 36″/38″ (Non-Stock Item) | |
| 18 | A7429 | Inner Hitch, 169 ⅜”, 12 Row 30″ (Shown) (Non-Stock Item) | |
| 18 | A7426 | Inner Hitch, 205 ⅜”, 16 Row 30″ (Non-Stock Item) | |
| 21 | GD10530 | 1 | U-Bolt, 2 ⅛” x 1 ⅞” x ⅜”-16 |
| 21 | G10229 | 2 | Lock Washer, ⅜” |
| 21 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 22 | G10585 | 1 | Hex Head Cap Screw, ½”-13 x 3 ¼” |
| 22 | G10216 | 1 | Washer, ½” USS |
| 22 | G10228 | 1 | Lock Washer, ½” |
| 22 | G10102 | 1 | Hex Nut, ½”-13 |
| 23 | GD10538-01 | 1 | Sleeve |
| 24 | GD13543 | 1 | Shim, 2 ½” x 10″, 7 Gauge |
| 24 | GD13544 | 1 | Shim, 2 ½” x 10″, 10 Gauge |
| 24 | GD13545 | 1 | Shim, 2 ½” x 10″, 12 Gauge |
INNER HITCH, “T
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10014 | 4 | Hex Head Cap Screw, ½”-13 x 1″, 12 Row 30″ |
| 2 | GD9959 | 2 | Wear Pad, Nylatron, 4″ x 4″ |
| 2 | GD5154 | 4-6 | Shim, 4″ x 4″ |
| 3 | G10894 | External Washer | |
| 4 | GD3537-17 | 1 | Shaft, 1 ¼” x 6 ⅜”, 12 Row 30″ |
| 5 | GA7423 | 1 | Tongue Hook W/Grease Fittings, 12 Row 30″ |
| 5 | G10641 | Grease Fitting, ⅛” NPT | |
| 6 | GD5804 | 1 | Pin, 1 ¼” x 12″, 12 Row 30″ |
| 6 | G10468 | 2 | Cotter Pin, ⅜” x 2″ |
| 8 | GD5173 | 1 | Pin, 1 ¼” x 5 ⅛” |
| 8 | G10462 | 1 | Cotter Pin, 3∕16″ x 2″ |
| 9 | G10131 | 1 | Square Head Set Screw, 5∕16″-18 x ¾” |
| 10 | GB0246 | 1 | Shoe |
| 11 | GD3537-11 | 1 | Shaft, 1 ¼” x 7″, 12 Row 30″ |
| 12 | A7432 | Inner Hitch, 145 ⅜”, 12 Row 30″ (Shown) (Non-Stock Item) | |
| 15 | GD10530 | 1 | U-Bolt, 2 ⅛” x 1 ⅞” x ⅜”-16 |
| 15 | G10229 | 2 | Lock Washer, ⅜” |
| 15 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 16 | G10585 | 1 | Hex Head Cap Screw, ½”-13 x 3 ¼” |
| 16 | G10216 | 1 | Washer, ½” USS |
| 16 | G10228 | 1 | Lock Washer, ½” |
| 16 | G10102 | 1 | Hex Nut, ½”-13 |
| 17 | GD10538-01 | 1 | Sleeve |
| 18 | GD13543 | 1 | Shim, 2 ½” x 10″, 7 Gauge |
| 18 | GD13544 | 1 | Shim, 2 ½” x 10″, 10 Gauge |
| 18 | GD13545 | 1 | Shim, 2 ½” x 10″, 12 Gauge |
HOSE TAKE-UP
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10689 | 6 | Carriage Bolt, ⅝”-11 x 2″ |
| 1 | GB0218 | 6 | Bushing, 21∕32″ I.D. x ⅞” O.D. x 19∕32″ Long |
| 1 | GD7805 | 6 | Special Washer, ⅝”, Hardened |
| 1 | G10107 | 6 | Lock Nut, ⅝”-11 |
| 2 | GA7058 | 1 | Take-Up, 28 ¼”, 8 Row 36″/38″ “Y” Hitch |
| 2 | GA7013 | Take-Up, 44 ¼”, 12 Row 30″ “Y” Hitch (Shown) | |
| 2 | GA7049 | Take-Up, 56 ¼”, 12 Row 30″ “T” Hitch And 16 Row 30″ “Y” Hitch | |
| 3 | GD8188 | 2 | Hose Clamp, ⅞” x 3″ x 5 ⅜” |
| 3 | GD8189 | 2 | Rubber Pad |
| 4 | G10581 | 1-2 | Hex Head Cap Screw, ½”-13 x 2 ¼” |
| 4 | G10053 | Hex Head Cap Screw, ½”-13 x 2 ½” | |
| 4 | G10111 | 1 | Lock Nut, ½”-13 |
| 5 | G10581 | 1 | Hex Head Cap Screw, ½”-13 x 2 ¼” |
| 5 | G10111 | 1 | Lock Nut, ½”-13 |
| 6 | GA7057 | 1 | Take-Up, 28 ¼”, 8 Row 36″/38″ “Y” Hitch |
| 6 | GA7021 | Take-Up, 44 ¼”, 12 Row 30″ “Y” Hitch (Shown) | |
| 6 | GA7075 | Take-Up, 67 ⅝”, 16 Row 30″ “T” Hitch | |
| 7 | GD9952 | 1 | Cover, 12 Row 30″ “Y”/“T” Hitch And 16 Row 30″ “Y” (Shown) |
| 7 | GD10295 | Cover, 8 Row 36″/38″ “Y” Hitch | |
| 8 | G10004 | 4 | Hex Head Cap Screw, ⅜”-16 x 1 ¼” |
| 8 | G10229 | 4 | Lock Washer, ⅜” |
| 8 | G10203 | 8 | Washer, ⅜” SAE |
| 8 | G10101 | 4 | Hex Nut, ⅜”-16 |
| 9 | G10172 | 2 | Hex Head Cap Screw, ⅜”-16 x 5″ |
| 9 | G10210 | 2 | Washer, ⅜” USS |
| 9 | G10108 | 2 | Lock Nut, ⅜”-16 |
| 11 | GA7050 | Take-Up, 56 ¼”, 12 Row 30″ “T” Hitch And 16 Row 30″ “Y” Hitch |
CENTER FRAME
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10102 | 1 | Hex Nut, ½”-13 |
| 1 | G10828 | 1 | Hex Socket Set Screw, ½”-13 x 1 ¼” |
| 2 | G10404 | Machine Bushing, 3 ⅛” x 2 ⅛” x 3∕16″ (As Required) | |
| 2 | G10234 | Machine Bushing, 2 ⅛”, 10 Gauge (As Required) | |
| 2 | G10336 | Machine Bushing, 2 ⅛”, 14 Gauge (As Required) | |
| 3 | GD10531 | 1 | Hinge Pin, 2 ⅛” x 25 ¾” |
| 4 | GD10492 | 2 | Adjustment Block |
| 5 | G10085 | Hex Head Cap Screw, ¾”-10 x 3 ¾” | |
| 5 | G10218 | Washer, ¾” USS | |
| 5 | G10112 | Lock Nut, ¾”-10 | |
| 6 | GA7390 | Safety Hook | |
| 7 | GD9898 | 1 | Pin, 1 ¼” x 2 15∕16″ |
| 8 | G10205 | 2 | Washer, ⅝” SAE |
| 8 | G10107 | 2 | Lock Nut, ⅝”-11 |
| 9 | GD10006 | 2 | Spring |
| 10 | GD9870 | 1 | Pin, 1 ¼” x 6″ |
| 11 | GA6943 | 2 | Spring Rod |
| 12 | G10037 | 2 | Hex Head Cap Screw, ½”-13 x 1 ¼” |
| 12 | G10206 | 2 | Washer, ½” SAE |
| 12 | G10228 | 2 | Lock Washer, ½” |
| 12 | GD7904-02 | 2 | Sleeve, ½” x ½” Long |
| 13 | GA7579 | 4 | Pad Holder W/Bars |
| 13 | GD10706 | Bar, 1 ¼” x 6″ x ¼” Thick | |
| 13 | GD10707 | Bar, 1 ¼” x 6″ x ⅜” Thick | |
| 13 | G10001 | Hex Head Cap Screw, ⅜”-16 x 1″ | |
| 14 | GD10053 | 8 | Wear Pad, 7″ x 7″, ½” Thick |
| 15 | GD7805 | 4 | Special Washer, ⅝”, Hardened |
| 15 | G10104 | 4 | Hex Nut, ⅝”-11 |
| 16 | GD9968 | 1 | Cap |
| 17 | GD8188 | 1 | Hose Clamp, ⅞” x 3″ x 5 ⅜” |
| 17 | GD8189 | 1 | Rubber Pad |
| 18 | G10053 | 1 | Hex Head Cap Screw, ½”-13 x 2 ½” |
| 18 | G10228 | 1 | Lock Washer, ½” |
| 18 | G10102 | 1 | Hex Nut, ½”-13 |
| 19 | G10543 | 16 | Hex Head Cap Screw, ¾”-10 x 3″, Full Thread |
| 19 | G10105 | 16 | Hex Nut, ¾”-10 |
| 21 | A7393 | Frame W/Cam Follower Mounts, 136″ (Non-Stock Item) | |
| 21 | GA6929 | Cam Follower Mount, L.H. | |
| 21 | GA6928 | Cam Follower Mount, R.H. | |
| 22 | G10025 | 2 | Hex Head Cap Screw, ¾”-10 x 1 ½” |
| 23 | GB0409 | 2 | Spring Washer |
| 24 | GD10532 | 2 | Sleeve |
| 25 | GA6497 | 2 | Cam Follower W/Grease Fitting |
| 25 | G10640 | Grease Fitting, ¼”-28 | |
| 26 | GD18344 | 1 | Valve Box Mount (If Applicable) |
| 27 | GD18329 | 2 | U-Bolt, 5∕16″-18 (If Applicable) |
| 27 | G10106 | 4 | Hex Nut, 5∕16″-18 (If Applicable) |
| 27 | G10232 | 4 | Lock Washer, 5∕16″ (If Applicable) |
| 29 | G10064 | 2 | Hex Head Cap Screw, ¼”-20 x 1″ (If Applicable) |
| 29 | G10227 | 2 | Lock Washer, ¼” (If Applicable) |
| 29 | GD7363-01 | 2 | Sleeve, ½” Long (If Applicable) |
| 29 | G10103 | 2 | Hex Nut, ¼”-20 (If Applicable) |
HYDRAULIC DRIVE PACKAGE OPTION
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD4743 | 4 | U-Bolt, 3″ x 3″ x ½”-13 |
| 1 | G10102 | 8 | Hex Nut, ½”-13 |
| 2 | GD18114 | 2 | Spacer |
| 3 | GA12569 | 1 | Motor Bracket |
| 4 | G3400-01 | 4 | Flangette |
| 5 | G2100-03 | 2 | Bearing, ⅞” Hex Bore, Spherical |
| 6 | G10002 | 2 | Hex Head Cap Screw, ⅜”-16 x ¾” |
| 7 | GD18326 | 1 | Hex Spacer |
| 8 | G10233 | 15 | Machine Bushing, 1″, 10 Gauge |
| 10 | G10133 | 2 | Hex Head Cap Screw, 5∕16″-18 x 1 ½” |
| 10 | G10232 | 2 | Lock Washer, 5∕16″ |
| 10 | G10106 | 2 | Hex Nut, 5∕16″-18 |
| 10 | G10110 | 2 | Lock Nut, ¼”-20, Grade B |
| 12 | G10036 | 2 | Hex Head Cap Screw, ⅝”-11 x 4″ |
| 12 | G10103 | 2 | Hex Nut, ¼”-20 |
| 13 | G10017 | 2 | Hex Head Cap Screw, ½”-13 x 1 ½” |
| 13 | G10102 | 2 | Hex Nut, ½”-13 |
| 14 | G3310-84 | 2 | Chain, No. 40, 84 Pitch Including Connector Link |
| 14 | GR0912 | Connector Link, No. 40 | |
| 15 | GD5857 | 2 | Spring |
| 16 | GA9553 | 2 | Idler W/Sprocket And Hardware |
| 16 | GA7154 | 2 | Sprocket W/Bearing, 19 Tooth |
| 16 | G10017 | 2 | Hex Head Cap Screw, ½”-13 x 1 ½” |
| 16 | G10128 | 2 | Machine Bushing, ½”, 14 Gauge |
| 16 | G10501 | 2 | Hex Jam Nut, ½”-13, Grade 2 |
| 16 | GD13422 | 2 | Idler Arm |
| 17 | GA5105 | 2 | Sprocket, 15 Tooth |
| 18 | GD16490 | 2 | Coupler, 1″ I.D. |
| 19 | G3317-16 | 1 | Chain, Double No. 40, 16 Pitches |
| 19 | GR1790 | Connector Link, Double No. 40 | |
| 20 | GD16489 | 1 | Coupler, ⅞” Hex |
| 21 | G10001 | 4 | Hex Head Cap Screw, ⅜”-16 x 1″ |
| 21 | G10101 | 4 | Hex Nut, ⅜”-16 |
| 22 | GA5114 | 2 | Sprocket, 30 Tooth |
| 23 | GA2180 | 2 | Hanger Bearing, ⅞” Hex Bore |
| 24 | GA11331 | Hex Lock Clamp Assembly | |
| 25 | GA12565 | 1 | Encoder Module |
| 26 | G11242 | 2 | Hex Socket Set Screw, ¼”-20 x ⅜” |
| 27 | GA12661 | 1 | Hex Adapter Encoder |
| 28 | GD18115 | 1 | Encoder Bracket |
| 29 | GD18014 | 1 | Carrier Bracket |
| 30 | GD0914-54.75 | 1 | Hex Shaft, ⅞” x 54 ¾” (No Holes), 12 R 30″ |
WING FRAME
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GA6792 | 1 | Light Bracket (Wide Row Sizes Only) |
| 2 | GD1113 | 1 | U-Bolt, 5″ x 7″ x ⅝”-11 |
| 2 | G10230 | 2 | Lock Washer, ⅝” |
| 2 | G10104 | 2 | Hex Nut, ⅝”-11 |
| 3 | G10001 | 2 | Hex Head Cap Screw, ⅜”-16 x 1″ |
| 3 | G10210 | 1 | Washer, ⅜” USS |
| 3 | G10229 | 2 | Lock Washer, ⅜” |
| 3 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 4 | GD9681 | 1 | Light Bracket (Wide Row Sizes Only) |
| 5 | G10064 | 8 | Hex Head Cap Screw, ¼”-20 x 1″ |
| 5 | G10110 | 8 | Lock Nut, ¼”-20, Grade B |
| 7 | GD5875 | Hose Clamp, 9∕16″ x 2 ½” x 2″ | |
| 8 | G10108 | Lock Nut, ⅜”-16 | |
| 9 | GD9963 | 1 | Pin, 1 ¼” x 9″ |
| 9 | G10460 | 2 | Cotter Pin, ¼” x 2″ |
| 10 | A7834 | Wing, R.H., 75 ½”, 8 Row 36″/38″ (Non-Stock Item) | |
| 10 | A7833 | Wing, L.H., 75 ½”, 8 Row 36″/38″ (Non-Stock Item) | |
| 10 | A6904 | Wing, R.H., 119 ¼”, 12 Row 30″ (Non-Stock Item) | |
| 10 | A6905 | Wing, L.H., 119 ¼”, 12 Row 30″ (Non-Stock Item) | |
| 10 | A6892 | Wing, R.H., 179 ¼”, 16 Row 30″ | |
| 10 | A6893 | Wing, L.H., 179 ¼”, 16 Row 30″ | |
| 11 | GA7018 | 1 | Link |
| 12 | GD10049 | 2 | Strap, 56″, 8 Row 36″/38″ |
| 12 | GD9956 | 2 | Strap, 41″, 12 Row 30″ And 16 Row 30″ |
| 13 | GD9964 | 2 | Pin, 1 ¼” x 10 ½” |
| 13 | G10159 | 4 | Machine Bushing, 1 ¼”, 10 Gauge |
| 13 | G10460 | 4 | Cotter Pin, ¼” x 2″ |
| 14 | GA7019 | 1 | Toggle Link |
| 15 | GD4108 | 1 | Pin, 1 ¼” x 7″ |
| 15 | G10159 | 2 | Machine Bushing, 1 ¼”, 10 Gauge |
| 15 | G10460 | 2 | Cotter Pin, ¼” x 2″ |
| 17 | GD9955 | 1 | Pin, 1 ¼” x 7″ |
| 17 | G10606 | 2 | Spring Pin, ¼” x 2″ |
| 18 | GD12724 | 1 | Bracket |
| 19 | GD6136 | 2 | Pin, 1 ¼” x 5″ |
| 19 | G10460 | 4 | Cotter Pin, ¼” x 2″ |
| 20 | G10874 | 1 | Detent Pin, ½” x 3 ½” Grip |
| 21 | GD12703 | 1 | Push Row Unit Light Bracket |
| 22 | G10001 | 2 | Hex Head Cap Screw, ⅜”-16 x 1″ |
| 22 | G10229 | 2 | Lock Washer, ⅜” |
| 22 | G10101 | 2 | Hex Nut, ⅜”-16 |
| 23 | G10033 | 1 | Hex Head Cap Screw, ½”-13 x 3 ½” |
| 23 | G10206 | 4 | Washer, ½” SAE |
| 23 | G10111 | 1 | Lock Nut, ½”-13 |
| 24 | G10439 | 2 | Hex Head Cap Screw, ⅝”-11 x 7″ |
| 24 | G10230 | 2 | Lock Washer, ⅝” |
| 24 | G10104 | 2 | Hex Nut, ⅝”-11 |
| 25 | GD1908 | 1 | Mounting Bracket |
| 26 | G10312 | 2 | Carriage Bolt, 5∕16″-18 x ¾” |
| 26 | G10620 | 2 | Serrated Flange Nut, 5∕16″-18 |
| 27 | GD15950 | 1 | Light Mount Extension |
| 28 | G10064 | 2 | Hex Head Cap Screw, ¼”-20 x 1″ |
| 28 | G10227 | 2 | Lock Washer, ¼” |
| 28 | G10103 | 2 | Hex Nut, ¼”-20 |
| 29 | GA9840 | 1 | Light Bracket |
| 30 | GB0309 | 1 | Light Mount Bracket |
CENTER PIVOT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | GA6964 | 1 | Hook Strap |
| 3 | GD10447 | 1 | Sleeve, 3 ⅝” |
| 3 | GD10446 | 1 | Sleeve, 3 13∕16″ |
| 4 | G10011 | 1 | Hex Head Cap Screw, ⅝”-11 x 5 ½” |
| 4 | G10107 | 1 | Lock Nut, ⅝”-11 |
| 5 | G10689 | 4 | Carriage Bolt, ⅝”-11 x 2″ |
| 5 | G10107 | 4 | Lock Nut, ⅝”-11 |
| 6 | G10027 | 4 | Hex Head Cap Screw, ¾”-10 x 2 ½” |
| 6 | GD2169 | 1 | Special Washer, 25∕32″ I.D. x 1 ¼” O.D., Hardened |
| 7 | GA5121 | 4 | Pin, 2 ⅛” |
| 8 | G10017 | 4 | Hex Head Cap Screw, ½”-13 x 1 ½” |
| 8 | G10216 | 4 | Washer, ½” USS |
| 8 | G10228 | 4 | Lock Washer, ½” |
| 8 | G10102 | 4 | Hex Nut, ½”-13 |
| 9 | GR0375 | 2 | Pin, 1″ x 3 ½” |
| 9 | GR0193 | 4 | Hair Pin Clip |
| 10 | GA7540 | 1 | Center Post |
| 11 | G10441 | 8 | Hex Head Cap Screw, ⅞”-9 x 3″, Grade 8 |
| 11 | GD10063 | 8 | Hardened Washer, ⅞” |
| 11 | G11053 | 8 | Hex Nut, ⅞”-9, Grade 8 |
| 12 | GA7096 | 2 | Cone |
| 13 | GA7067 | 1 | Bearing Housing W/Cups, Less Grease Fitting |
| 13 | GD10011 | 2 | Cup |
| 13 | G10779 | 1 | Grease Fitting, 90°, ¼”-28 |
| 14 | GD10012 | Shim, .005″ Thick (As Required) | |
| 14 | GD10013 | Shim, .020″ Thick (As Required) | |
| 14 | GD10014 | Shim, .007″ Thick (As Required) | |
| 15 | GD9130 | 1 | O-Ring |
| 16 | GD9636 | 1 | Bearing Cap |
AXLE ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | GD2558 | 1 | Lynch Pin, ¼” |
| 2 | G10802 | 6 | Hex Head Cap Screw, ¾”-10 x 2 ¾” |
| 2 | G10028 | Hex Head Cap Screw, ¾”-10 x 3″ | |
| 2 | G10231 | 6 | Lock Washer, ¾” |
| 2 | G10105 | 6 | Hex Nut, ¾”-10 |
| 3 | GA7098 | 1 | Manual Safety Lockup W/Detent Pin |
| 3 | GA7022 | 1 | Detent Pin W/Chain |
| 4 | GA11200 | 1 | Bulkhead Mount |
| 5 | GD8276 | 1 | Pin |
| 5 | G10237 | 1 | Lock Washer, 7∕16″ |
| 5 | G10100 | 1 | Hex Nut, 7∕16″-14 |
| 6 | GA7120 | 1 | Cable, 8 Row 36″/38″ |
| 6 | GA6608 | Cable Assembly, 12 Row 30″ And 16 Row 30″ | |
| 7 | G10228 | 2 | Lock Washer, ½” |
| 7 | G10102 | 2 | Hex Nut, ½”-13 |
| 8 | G306-08 | 2 | Lock Nut, ¾”-16 |
| 8 | G306-10 | 2 | Lock Nut, ⅞”-14 |
| 9 | GD10092 | 1 | Pin, 1 ¼” x 5 ¼” |
| 9 | G10226 | 4 | Washer, 1 ¼” SAE |
| 9 | G10049 | 1 | Hex Head Cap Screw, ⅜”-16 x 2 ½” |
| 9 | G10108 | 1 | Lock Nut, ⅜”-16 |
| 11 | G10437 | 4 | Hex Head Cap Screw, ¾”-8 x 2 ½”, Grade 8, “Y” Hitch |
| 11 | G10810 | 4 | Hex Head Cap Screw, ¾”-10 x 3 ½”, Grade 8, “T” Hitch |
| 11 | GD2169 | 4 | Special Washer, 25∕32″ I.D. x 1 ¼” O.D., Hardened |
| 11 | G10436 | 4 | Hex Nut, ¾”-10 |
| 12 | GD10064 | 1 | Pin, 1 ¼” x 5 ¼” |
| 12 | G10460 | 2 | Cotter Pin, ¼” x 2″ |
| 13 | GA8062 | Axle W/Stub Axle, 12 Row 30″ And 16 Row 30″ | |
| 13 | GA9883 | Stub Axle, Narrow Row | |
| 13 | GA8063 | Axle W/Stub Axle, 8 Row 36″/38″ | |
| 13 | GA9882 | Stub Axle, Wide Row | |
| 14 | GD12543 | Scraper | |
| 15 | G10636 | Carriage Bolt, ½”-13 x 1 ½” | |
| 15 | G10216 | Washer, ½” USS | |
| 15 | G10228 | Lock Washer, ½” | |
| 15 | G10102 | Hex Nut, ½”-13 | |
| 16 | G10808 | 6 | Hex Head Cap Screw, 1″-8 x 10″, Grade 8, “Y” Hitch |
| 16 | G10811 | 6 | Hex Head Cap Screw, 1″-8 x 11″, Grade 8, “T” Hitch |
| 16 | GD10231 | 6 | Special Washer, 1 1∕16″ I.D. x 2″ O.D. |
| 16 | G10647 | 6 | Hex Nut, 1″-8, Grade 8 |
| 17 | G10636 | Carriage Bolt, ½”-13 x 1 ½” | |
| 17 | G10228 | Lock Washer, ½” | |
| 17 | G10102 | Hex Nut, ½”-13 | |
| 18 | GD18645 | 1 | Cable Gaurd (If Applicable) |
TRANSPORT WHEELS/ROCK GUARDS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | G10448 | 2 | Hex Head Cap Screw, ⅞”-9 x 2 ½”, Grade 8 |
| 1 | G10330 | 2 | Lock Washer, ⅞” |
| 2 | GA4727 | 1 | Spindle W/Retaining Ring, 1 ¾” |
| 2 | G10913 | External Retaining Ring, 2 ½” | |
| 3 | GA4722 | 2 | Seal |
| 4 | GA4723 | 2 | Bearing |
| 5 | GA4729 | 1 | Hub W/Cups, Bolts, Nuts And Grease Fitting, 8 Bolt, 1 ¾” Bore |
| 5 | G10640 | Grease Fitting, ¼”-28 | |
| 5 | GD7079 | Cup | |
| 5 | GR0528 | Stud, ⅝”-18 x 2 ¼”, Grade 8 | |
| 6 | GD7089 | 1 | Special Nut, 1 ¾”-12 UNF |
| 7 | GD7864 | 1 | Special Hex Nut, 1 ¾”-12 UNF |
| 8 | GA9544 | Rim, 5.5″ x 22.5″, All Sizes | |
| 9 | GD13409 | Tire, 255-70R 22.5″ W/O Center Rib, Tubeless (Specify Brand*) | |
| 10 | G10037 | Hex Head Cap Screw, ½”-13 x 1 ¼” | |
| 10 | G10228 | Lock Washer, ½” | |
| 10 | G10102 | Hex Nut, ½”-13 | |
| 11 | GA5716 | Rock Guard (Optional) | |
| 12 | GA7434 | Valve Stem | |
| 13 | GD18676 | 4 | Lug Bolt, ⅝”-18 x 2 ¾” (If Applicable) |
| 14 | GD18643 | 1 | Jump Start Wheel (If Applicable) |
| 15 | G10020 | 2 | Hex Head Cap Screw, ¼”-20 x ⅝” (If Applicable) |
| 15 | G10227 | 2 | Lock Washer, ¼” (If Applicable) |
| 15 | G10103 | 2 | Hex Nut, ¼”-20 (If Applicable) |
| 16 | GD18646 | 1 | Sensor Bracket Cover (If Applicable) |
| 17 | GA13204 | 1 | Hall Effect Sensor (If Applicable) |
| 18 | GA13227 | 1 | Sensor Bracket (If Applicable) |