CASE 1010 Grain header - PartCatalogs.net

CASE 1010 Grain header — parts list

1,137 part numbers across 21 assemblies, transcribed from the catalogue above. Search this page for a part number to find the assembly it belongs to.

04-01 WIRING HARNESS AND LAMP MOUNTING BSN JJC0304999

Pos	Part no.	Qty	Description
1	134454A1	2	LAMP, warning amber, Not Shown, Includes 2 – 4
2	87364	2	WASHER, 1/2″, SAE
3	80679	2	WASHER, LOCK, 1/2″
4	280963	2	NUT, 1/2″-20, G5
5	126890A1	2	SHIELD, marker light
6	145913	4	BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
7	145458	4	NUT, Flg, USR, 5/16″-18
8	127031A1	2	SUPPORT, marker light
9	256873	2	BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr
10	145458	2	NUT, Flg, USR, 5/16″-18
11	127057A2	2	BRACKET, marker light, BSN CBJ023000
12	140374A1	2	U-BOLT, UR 5/16″ x 1 5/16″ x 1 13/16″ NC
13	231-4215	4	NUT, LOCK, 5/16″-18, GB
14	255918	4	BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr
15	247780	4	NUT, Flg, USR, 3/8″-16
16	128896A1	1	HARNESS, WIRE, lamp, marker lights
17	516-23127	2	CLAMP, J, 9/16″ Insul, 3/8″ Bolt
18	435437A1	2	STRAP, CABLE, 3/16″ x 7 1/4″

04-02 WIRING HARNESS AND LAMP MOUNTING ASN JJC0305000

Pos	Part no.	Qty	Description
1	134454A1	2	LAMP, warning amber, Includes 2 – 4, Not Shown
2	87364	2	WASHER, 1/2″, SAE
3	80679	2	WASHER, LOCK, 1/2″
4	280963	2	NUT, 1/2″-20, G5
5	390636A1	2	BRACKET, marker light
6	145913	4	BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
7	145458	4	NUT, Flg, USR, 5/16″-18
8	127031A1	2	SUPPORT, marker light
9	256873	2	BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr
10	145458	2	NUT, Flg, USR, 5/16″-18
11	127057A2	2	BRACKET, marker light, BSN JJC0308544
12	140374A1	2	U-BOLT, UR 5/16″ x 1 5/16″ x 1 13/16″ NC
13	231-4215	4	NUT, LOCK, 5/16″-18, GB
14	255918	4	BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr
15	247780	4	NUT, Flg, USR, 3/8″-16
16	128896A1	1	HARNESS, WIRE, lamp, marker lights
17	516-23127	2	CLAMP, J, 9/16″ Insul, 3/8″ Bolt
18	435437A1	2	STRAP, CABLE, 3/16″ x 7 1/4″
19	311864A1	1	REFLECTOR, retroreflective amber
20	311863A1	1	REFLECTOR, retroreflective red
21	311865A1	1	REFLECTOR, fluorescent orange

04-03 WARNING LIGHT

Pos	Part no.	Qty	Description
0	134454A1	2	LAMP, warning amber, Includes 1 – 10
2	529068	1	BULB, #1156, 12V
3	A43731	2	GASKET, sealing, lens
6	F63434	2	LENS, amber, turn signal light, flasher
7	87016394	8	SCREW, SELF TAP, Cross Pan Hd, #8 x 5/8″
8	87364	1	WASHER, 1/2″, SAE
9	80679	1	WASHER, LOCK, 1/2″
10	280963	1	NUT, 1/2″-20, G5

08-01 REEL DRIVE MOTOR SYSTEM

Pos	Part no.	Qty	Description
1	130409A1	1	MOTOR, HYDRAULIC, reel drive, See Figure 08-06
2	167269	4	O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
4	248974	4	ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, 37є Fem Sw
5	130000A1	2	HOSE, 1524 mm (60 inch) long, hydraulic, 3/8 ID (Bat reel)
5	131057A1	2	HOSE, 1270 mm (50″) long, hydraulic, 3/8 ID (Pick-up reel)
6	87557087	2	STRAP, CABLE, 11″ with stainless locking clip
8	1338406C1	2	TUBE, HYD, reel drive
11	1338408C1	2	TUBE, HYD, reel drive (15.0 foot)
11	1316443C1	2	TUBE, HYD, reel dive, 17.5 foot
11	1338410C1	2	TUBE, HYD, reel drive (20.0 foot)
11	1338411C1	2	TUBE, HYD, reel drive (22.5 foot)
11	1338412C1	2	TUBE, HYD, reel drive (25.0 foot)
11	1338413C1	2	TUBE, HYD, reel drive (30.0 foot)
15	264654	1	FITTING, Blkhd, 3/4″-16, 37є x 3/4″-16, 37є
16	524036	1	NUT, LOCK, Blkhd, 3/4″-16
17	1316779C2	1	SUPPORT
18	87034817	2	SCREW, SELF TAP, Hex Wash Hd, 5/16″ x 3/4″
19	1321398C3	1	CLAMP, quick disconnect
23	88542	2	BOLT, Hex, 1/4″-20 x 1/2″, G5, Full Thd
24	218-5060	2	CONNECTOR, HYD., 3/4″-16, 37є x 7/8″-14, O-Ring
25	1282338C91	1	COUPLING, QUICK, FEMALE, 7/8 NF, Self-Sealing
26	1954133C1	1	DUST CAP, plug assembly
28	1316829C1	1	HOSE, 965 mm (38″) long, hydraulic, 3/8″ ID
29	1345266C1	1	WASHER, lock, white, special
30	1272399C2	1	COUPLING, QUICK, MALE, self sealing, male, 7/8″ NF
32	9610689	2	ELBOW, 45є, 3/4″-16 x 7/8″-14, O-Ring
33	80679	2	WASHER, LOCK, 1/2″
34	129-857	2	NUT, Sq, 1/2″-13
35	9707516	2	BOLT, Hex, 1/2″-13 x 1 3/4″, G5
36	396-41053	2	WASHER, 17/32″ x 1 1/4″ x .188″, HDN
37	523282	2	NUT, Flg, USR, 1/4″-20
38	251636A1	3	CAP, fitting aluminum 1/2″ with seal

08-02 REEL FORE AND AFT HYDRAULIC SYSTEM – 15.0, 17.5 AND 20.0 FOOT

Pos	Part no.	Qty	Description
1	276971A1	2	CYLINDER ASSY., bat reel, fore and aft, See Figure 08-07
2	76344	4	ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, O-Ring
3	9617873	4	O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
4	1284278C1	1	HOSE, hyd 1/4″ x 41″
4	1277506C1	1	HOSE, 1194 mm (47 inch) long, hydraulic, 1/4 ID, Pick-up Reel
5	183825C1	4	CLAMP, 3/8″ tubes
7	9626558	4	NUT, LOCK, Flg, 1/4″-20
8	86629586	6	ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, 37є Fem Sw
9	141425A2	1	HOSE, 1/4″ x 57″
10	812382C1	1	HOSE, hyd 1/4″ x 1270 mm (50″) long
10	147876C1	1	HOSE, hyd 1/4″ x 45″ fl 3/8″ fjic x 3/8″ fjic
13	147875C1	1	HOSE, 890 mm (35″) long, hydraulic, 1/4 ID
15	1338414C1	1	TUBE, HYD, reel lift (15.0 foot)
15	1338416C1	1	TUBE, HYD, reel lift (17.5 foot)
15	1316596C1	1	TUBE, HYD, reel lift (20.0 foot)
16	1338420C1	1	TUBE, HYD, reel lift
17	138333A1	1	TUBE, fore and aft (15.0 foot)
17	138334A1	1	TUBE, fore and aft (17.5 foot)
17	138335A1	1	TUBE, fore and aft (20.0 foot)
18	1316601C1	1	TUBE, HYD, reel lift (15.0 foot)
18	1316604C1	1	TUBE, HYD, 3/8″ x 100″, 17.5 foot
18	1338420C1	1	TUBE, HYD, reel lift, 20.0 foot
19	1338418C1	1	TUBE, HYD, reel lift (15.0 and 17.5 foot)
19	1338421C1	1	TUBE, HYD, reel lift, 20.0 foot
20	86513087	1	FITTING, Blkhd, 9/16″-18, 37є x 9/16″-18, 37є
21	525646	2	CONNECTOR, HYD., 9/16″-18, 37є x 7/8″-14, O-Ring
23	86525	1	NUT, LOCK, Blkhd, 9/16″-18
25	280317	4	BOLT, Hex, 1/4″-20 x 3″, G5
26	1326573C1	4	SPACER, 45 mm long
27	435437A1	12	STRAP, CABLE, 3/16″ x 7 1/4″
28	1954133C1	1	DUST CAP, plug assembly
29	1282338C91	1	COUPLING, QUICK, FEMALE, 7/8 NF, Self-Sealing
30	167269	2	O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
33	1316779C2	1	SUPPORT
34	87034817	2	SCREW, SELF TAP, Hex Wash Hd, 5/16″ x 3/4″
35	1321398C3	1	CLAMP, quick disconnect
36	88542	2	BOLT, Hex, 1/4″-20 x 1/2″, G5, Full Thd
37	1254527C2	1	HOSE, 940 mm (37″) long, hydraulic, 1/4 id
38	1541792C1	1	WASHER, LOCK, red, special
39	1272399C2	1	COUPLING, QUICK, MALE, self sealing, male, 7/8″ NF
41	523282	2	NUT, Flg, USR, 1/4″-20
45	485093C1	2	CLAMP
46	80701	2	WASHER, 1/4″
47	87845	2	BOLT, Hex, 1/4″-20 x 2 1/2″, G5
48	9626558	2	NUT, LOCK, Flg, 1/4″-20
50	1316318C3	1	SUPPORT, bracket RH cylinder, BSN JJC0308544
51	88043	2	BOLT, Hex, 1/2″-13 x 3 1/4″, G5
52	231-4118	4	NUT, LOCK, 1/2″-13, GB
53	87339	2	BOLT, Hex, 1/2″-13 x 3″, G5
54	280387A1	1	SUPPORT, bracket LH cylinder mount, BSN JJC0308544
56	439-5628	2	PIN, HEADED, 3/8″ x 1 3/4″
57	439-1636	2	PIN, HEADED, 3/8″ x 2 1/2″, G2
58	80756	4	PIN, SPLIT (COTTER), 1/8″ x 3/4″

08-03 REEL FORE AND AFT HYDRAULIC SYSTEM – 22.5, 25.0 AND 30.0 FOOT

Pos	Part no.	Qty	Description
1	276971A1	2	CYLINDER ASSY., bat reel, fore and aft, See figure 8-07
2	76344	4	ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, O-Ring
3	9617873	4	O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
4	1284278C1	1	HOSE, hyd 1/4″ x 41″
4	1277506C1	1	HOSE, 1194 mm (47 inch) long, hydraulic, 1/4 ID, Pick-up Reel
5	183825C1	6	CLAMP, 3/8″ tubes
7	9626558	6	NUT, LOCK, Flg, 1/4″-20
8	86629586	6	ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, 37є Fem Sw
9	141425A2	1	HOSE, 1/4″ x 57″
10	812382C1	1	HOSE, hyd 1/4″ x 1270 mm (50″) long
10	147876C1	1	HOSE, hyd 1/4″ x 45″ fl 3/8″ fjic x 3/8″ fjic
13	147875C1	1	HOSE, 890 mm (35″) long, hydraulic, 1/4 ID
15	1316598C1	1	TUBE, HYD, reel lift (22.5 and 25.0 foot)
15	1338421C1	1	TUBE, HYD, reel lift, 30.0 foot
16	1338420C1	1	TUBE, HYD, reel lift, 22.5 and 25.0 foot
16	1338420C1	1	TUBE, HYD, reel lift, 30.0 foot
17	1316602C2	1	TUBE, HYD, fore and aft (22.5 foot)
17	138338A1	1	TUBE, fore and aft (25.0 foot)
17	1338420C1	1	TUBE, HYD, reel lift, 30.0 foot, Longer Tube
18	1316597C1	1	TUBE, HYD, reel lift (22.5 foot)
18	1316601C1	1	TUBE, HYD, reel lift (25.0 foot)
18	1316604C1	1	TUBE, HYD, 3/8″ x 100″, 30.0 foot
19	1316603C1	2	TUBE, HYD, reel lift (22.5 foot)
19	1316605C1	2	TUBE, HYD, 3/8″ x 119 1/2″, 25.0 foot
19	1338420C1	2	TUBE, HYD, reel lift, 30.0 foot
20	86513087	1	FITTING, Blkhd, 9/16″-18, 37є x 9/16″-18, 37є
21	525646	2	CONNECTOR, HYD., 9/16″-18, 37є x 7/8″-14, O-Ring
23	86525	1	NUT, LOCK, Blkhd, 9/16″-18
25	280317	6	BOLT, Hex, 1/4″-20 x 3″, G5
26	1326573C1	6	SPACER, 45 mm long
27	435437A1	2	STRAP, CABLE, 3/16″ x 7 1/4″
28	1954133C1	1	DUST CAP, plug assembly
29	1282338C91	1	COUPLING, QUICK, FEMALE, 7/8 NF, Self-Sealing
30	167269	2	O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
33	1316779C2	1	SUPPORT
34	87034817	2	SCREW, SELF TAP, Hex Wash Hd, 5/16″ x 3/4″
35	1321398C3	1	CLAMP, quick disconnect
36	88542	2	BOLT, Hex, 1/4″-20 x 1/2″, G5, Full Thd
37	1254527C2	1	HOSE, 940 mm (37″) long, hydraulic, 1/4 id
38	1541792C1	1	WASHER, LOCK, red, special
39	1272399C2	1	COUPLING, QUICK, MALE, self sealing, male, 7/8″ NF
41	523282	2	NUT, Flg, USR, 1/4″-20
45	485093C1	2	CLAMP
46	80701	2	WASHER, 1/4″
47	87845	2	BOLT, Hex, 1/4″-20 x 2 1/2″, G5
48	9626558	2	NUT, LOCK, Flg, 1/4″-20
50	1316318C3	1	SUPPORT, bracket RH cylinder, BSN JJC0308544
51	88043	2	BOLT, Hex, 1/2″-13 x 3 1/4″, G5
52	231-4118	4	NUT, LOCK, 1/2″-13, GB
53	87339	2	BOLT, Hex, 1/2″-13 x 3″, G5
54	280387A1	1	SUPPORT, bracket LH cylinder mount, BSN JJC0308544
56	439-5628	2	PIN, HEADED, 3/8″ x 1 3/4″
57	439-1636	2	PIN, HEADED, 3/8″ x 2 1/2″, G2
58	80756	4	PIN, SPLIT (COTTER), 1/8″ x 3/4″
59	251635A1	5	CAP, fitting aluminum 3/8″ with seal
60	251637A1	1	CAP, fitting aluminum 5/8″ with seal

08-04 REEL LIFT HYDRAULIC SYSTEM – 15.0, 17.5 AND 20.0 FOOT

Pos	Part no.	Qty	Description
1	128723A2	1	HYDRAULIC CYLINDER, 1 1/2″ x 9 3/8″, Reel Lift Master, See Figure 08-09, BSN JJC0308544
2	128726A1	1	HYDRAULIC CYLINDER, 1 x 9 3/8″, Reel Lift Slave, See Figure 08-10, BSN JJC0308544
3	76344	2	ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, O-Ring
4	330346	1	ELBOW, 45є, 9/16″-18, 37є x 9/16″-18, O-Ring
5	9617873	3	O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
6	86629586	4	ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, 37є Fem Sw
7	86513087	1	FITTING, Blkhd, 9/16″-18, 37є x 9/16″-18, 37є, , BSN JJC0308544
8	86525	1	NUT, LOCK, Blkhd, 9/16″-18
9	183821C1	1	CLAMP, tube, single, 3/8″ OD tube
10	183825C1	3	CLAMP, 3/8″ tubes
11	1254527C2	1	HOSE, 940 mm (37″) long, hydraulic, 1/4 id
12	280164	4	BOLT, Hex, 1/4″-20 x 1 3/4″, G5
13	1326572C1	4	SPACER, 10 mm, long
14	9626558	4	NUT, LOCK, Flg, 1/4″-20
15	147875C1	3	HOSE, 890 mm (35″) long, hydraulic, 1/4 ID
16	86637979	1	CLAMP, 13/16″, Insul, 3/8″ Bolt
17	485093C1	1	CLAMP
18	9706726	2	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
19	247780	2	NUT, Flg, USR, 3/8″-16
20	1338418C1	1	TUBE, HYD, reel lift (15.0 and 17.5 foot)
20	1338421C1	1	TUBE, HYD, reel lift, 20.0 foot
21	1316601C1	1	TUBE, HYD, reel lift (15.0 foot)
21	1316604C1	1	TUBE, HYD, 3/8″ x 100″, 17.5 foot
21	1338420C1	1	TUBE, HYD, reel lift, 20.0 foot
23	1338419C1	1	TUBE, HYD, reel lift
24	1338414C1	1	TUBE, HYD, reel lift (15.0 foot)
24	1338416C1	1	TUBE, HYD, reel lift (17.5 foot)
24	1316596C1	1	TUBE, HYD, reel lift (20.0 foot)
25	1541804C1	1	WASHER, black, special
26	525646	1	CONNECTOR, HYD., 9/16″-18, 37є x 7/8″-14, O-Ring
27	167269	1	O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
28	1272399C2	1	COUPLING, QUICK, MALE, self sealing, male, 7/8″ NF
29	251635A1	4	CAP, fitting aluminum 3/8″ with seal

08-05 REEL LIFT HYDRAULIC SYSTEM – 22.5, 25.0 AND 30.0 FOOT

Pos	Part no.	Qty	Description
1	128723A2	1	HYDRAULIC CYLINDER, 1 1/2″ x 9 3/8″, Reel Lift Master, See Figure 08-09, BSN JJC0308544
2	128726A1	1	HYDRAULIC CYLINDER, 1 x 9 3/8″, Reel Lift Slave, See Figure 08-10, BSN JJC0308544
3	76344	2	ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, O-Ring
4	330346	1	ELBOW, 45є, 9/16″-18, 37є x 9/16″-18, O-Ring
5	9617873	3	O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
6	86629586	4	ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, 37є Fem Sw
7	86513087	1	FITTING, Blkhd, 9/16″-18, 37є x 9/16″-18, 37є, , BSN JJC0308544
8	86525	1	NUT, LOCK, Blkhd, 9/16″-18
9	183821C1	2	CLAMP, tube, single, 3/8″ OD tube
10	183825C1	4	CLAMP, 3/8″ tubes
11	1254527C2	1	HOSE, 940 mm (37″) long, hydraulic, 1/4 id
12	280164	6	BOLT, Hex, 1/4″-20 x 1 3/4″, G5
13	1326572C1	6	SPACER, 10 mm, long
14	9626558	6	NUT, LOCK, Flg, 1/4″-20
15	147875C1	3	HOSE, 890 mm (35″) long, hydraulic, 1/4 ID
16	86637979	1	CLAMP, 13/16″, Insul, 3/8″ Bolt
17	485093C1	1	CLAMP
18	9706726	2	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
19	247780	2	NUT, Flg, USR, 3/8″-16
20	1316597C1	1	TUBE, HYD, reel lift (22.5 foot)
20	1316601C1	1	TUBE, HYD, reel lift (25.0 foot)
20	1316604C1	1	TUBE, HYD, 3/8″ x 100″, 30.0 foot
21	1316603C1	2	TUBE, HYD, reel lift (22.5 foot)
21	1316605C1	2	TUBE, HYD, 3/8″ x 119 1/2″, 25.0 foot
21	1338420C1	2	TUBE, HYD, reel lift, 30.0 foot
23	1316598C1	1	TUBE, HYD, reel lift (22.5 and 25.0 foot)
23	1338421C1	1	TUBE, HYD, reel lift, 30.0 foot
24	1338419C1	1	TUBE, HYD, reel lift
25	1541804C1	1	WASHER, black, special
26	525646	1	CONNECTOR, HYD., 9/16″-18, 37є x 7/8″-14, O-Ring
27	167269	1	O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
28	1272399C2	1	COUPLING, QUICK, MALE, self sealing, male, 7/8″ NF
29	251635A1	4	CAP, fitting aluminum 3/8″ with seal

08-06 REEL DRIVE MOTOR

Pos	Part no.	Qty	Description
1	130409A1	1	MOTOR, HYDRAULIC, reel drive, Includes 2 – 18
11	47471	1	WOODRUFF KEY, #15, 1/4″ x 1″, HT
19	87036584	1	KIT, SEALS, Auger Drive Motor

08-07 REEL FORE AND AFT CYLINDER BAT REEL

Pos	Part no.	Qty	Description
0	276971A1	2	CYLINDER ASSY., bat reel, fore and aft, Includes 1- 18
2	232-4617	1	NUT, LOCK, 7/16″-20, GC
3	294167A1	1	ROD, PISTON, bat reel
4	370181A1	1	PISTON
5	108996C1	1	CYLINDER HEAD, front
6	547549R1	1	RING, LOCKING, front head
10	9993141	1	O-RING, -012, 90 Duro, .364″ ID x .070″ Thk
11	108999C1	1	WIPER, rod
12	108997C1	1	BACK-UP RING
13	238-6116	1	O-RING, -116, 90 Duro, .737″ ID x .103″ Thk
14	108998C1	1	BACK-UP RING
15	238-6121	1	O-RING, -121, 90 Duro, 1.049″ ID x .103″ Thk
16	532529R2	1	O-RING, quad
17	164380	1	O-RING, -119, 70 Duro, .924″ ID x .103″ Thk
18	370180A1	1	RING, wear

08-08 REEL FORE AND AFT CYLINDER PICKUP REEL

Pos	Part no.	Qty	Description
0	277402A1	2	CYLINDER ASSY., pickup reel, Includes 1- 19
2	232-4617	1	NUT, LOCK, 7/16″-20, GC
3	294168A1	1	ROD, PISTON, pickup reel
4	370181A1	1	PISTON
5	108996C1	1	CYLINDER HEAD, front
6	547549R1	1	RING, LOCKING, front head
7	370183A1	1	KIT, SEALS, hydraulic cylinder, Includes 6 – 19
10	9993141	1	O-RING, -012, 90 Duro, .364″ ID x .070″ Thk
11	108999C1	1	WIPER, rod
12	108997C1	1	BACK-UP RING
13	238-6116	1	O-RING, -116, 90 Duro, .737″ ID x .103″ Thk
14	108998C1	1	BACK-UP RING
15	238-6121	1	O-RING, -121, 90 Duro, 1.049″ ID x .103″ Thk
16	532529R2	1	O-RING, quad
17	239-5119	1	O-RING, Rect, .938″ ID x 1.125″ OD, Cl 5
18	370180A1	1	RING, wear
19	164380	1	O-RING, -119, 70 Duro, .924″ ID x .103″ Thk, , Not Shown

08-09 REEL LIFT MASTER CYLINDER

Pos	Part no.	Qty	Description
0	128723A2	1	HYDRAULIC CYLINDER, 1 1/2″ x 9 3/8″, Reel Lift Master, Includes 1 – 12, BSN JJC0308544
2	547384R2	1	CYLINDER HEAD, front
3	128724A1	1	ROD, PISTON
4	547333R3	1	PISTON
5	548033R1	1	NUT, LOCK, hex jam, 3/4″-16
6	238-6017	1	O-RING, -017, 90 Duro, .676″ ID x .070″ Thk
7	238-5123	1	O-RING, -123, 70 Duro, 1.174″ ID x .103″ Thk
8	547383R2	1	SEAL, ring
10	238-6126	1	O-RING, -126, 90 Duro, 1.375″ ID x .103″ Thk
11	1272317C1	1	SEAL, rod
12	564808R91	1	WIPER, seal, shaft

08-10 REEL LIFT SLAVE CYLINDER

Pos	Part no.	Qty	Description
0	128726A1	1	HYDRAULIC CYLINDER, 1 x 9 3/8″, Reel Lift Slave, Includes 1- 7, BSN JJC0308544
2	463-1104	1	SCREW, Hex Hd, #10-24 x 1/4″
3	128727A1	1	ROD, PISTON
4	145190C1	1	RING, SNAP
5	532773R1	1	WIPER, rod
6	533145R1	1	WASHER, rubber bonded
7	119185C1	1	SEAL, rod, Use with cylinder 128726A1
7	389500A1	1	SEAL, rod, Use with cylinder 87045528

08-11 HEADER TO COMBINE CONNECTING HOSES 1400 SERIES COMBINES

Pos	Part no.	Qty	Description
0	1326596C91	1	PACKAGE, hydraulic hose completing, Includes 1- 8
1	179202C1	1	HOSE, 1727 mm (68″) long, header to combine reel lift
2	76350	1	CONNECTOR, HYD., 9/16″-18, 37є x 9/16″-18, O-Ring
3	9617873	1	O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
4	187563C1	1	COUPLING, QUICK, FEMALE, 9/16″-18
5	D51685	2	HOSE, reel drive, 1676 mm (66 in)
6	218-5060	1	CONNECTOR, HYD., 3/4″-16, 37є x 7/8″-14, O-Ring
7	167269	1	O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
8	395149R1	1	COUPLING, QUICK, MALE, male, 7/8 inch NF
8	1272399C2	1	COUPLING, QUICK, MALE, self sealing, male, 7/8″ NF

08-12 REEL FORE AND AFT ATTACHMENT 1400 SERIES COMBINES

Pos	Part no.	Qty	Description
0	1957287C2	1	PACKAGE, hydraulic reel fore and aft completing, Includes 1- 29
1	124857A1	1	VALVE, double piloted
2	237-6008	2	O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
3	76347	2	ELBOW, 90є, 9/16″-18, 37є x 3/4″-16, O-Ring
4	1321591C1	1	HOSE, reel, 2400 mm (94 1/2″) long, 5/16 ID
5	1284369C1	1	HOSE, hydraulic 3/8″ x 130″ long
6	1541792C1	1	WASHER, LOCK, red, special
7	525646	2	CONNECTOR, HYD., 9/16″-18, 37є x 7/8″-14, O-Ring
8	167269	2	O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
9	1282338C91	1	COUPLING, QUICK, FEMALE, 7/8 NF, Self-Sealing
10	1272399C2	1	COUPLING, QUICK, MALE, self sealing, male, 7/8″ NF, Not Shown
11	87557084	5	STRAP, CABLE, 14″ with stainless locking clip
13	1301630C2	2	TUBE, through
14	9993141	6	O-RING, -012, 90 Duro, .364″ ID x .070″ Thk
15	424-496	3	BOLT, Hex, 1/4″-20 X 6, G2
16	493-41026	3	WASHER, LOCK, Ext Tooth, 1/4″
17	1301637C1	2	ORIFICE, valve
20	1866277R1	1	ARMATURE, wiring
21	1301175C1	1	SWITCH, fore and aft
22	281007	2	SCREW, Cross Pan Hd, #6-32 x 1/2″
23	1301940C3	1	COVER, console extension
24	24613R1	4	SCREW, SELF TAP, Cross Oval Hd, #8 x 3/4″
25	262965C91	1	BREAKER, circuit, 10 ampere
26	80684	2	WASHER, LOCK, #10
27	87825	2	NUT, #10-32
28	435437A1	3	STRAP, CABLE, 3/16″ x 7 1/4″
29	537024R1	1	CLIP, edge

08-13 CONTROL VALVE ASSY – REEL FORE AND AFT ATTACHMENT – 1400 SERIES COMBINES

Pos	Part no.	Qty	Description
0	124857A1	1	VALVE, double piloted, Includes 1- 39
1	100475A1	2	PLUG, end cap
3	100474A1	2	SPRING, spool centering return
4	167269	2	O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
5	1301687C1	2	RETAINER, spring
6	238-6019	2	O-RING, -019, 90 Duro, .801″ ID x .070″ Thk
7	1301627C3	2	SLEEVE, poppet
8	1301624C1	2	BUSHING, pole
9	1301640C1	2	SPRING, poppet
10	1301648C1	2	ARMATURE, bushing
11	1301624C1	2	BUSHING, pole
12	1301625C1	2	ORIFICE, piston
13	110550A1	2	POPPET, VALVE
14	238-6010	2	O-RING, -010, 90 Duro, .239″ ID x .070″ Thk
19	124777A1	1	SPOOL, shuttle
30	124775A1	1	CAP, check valve
31	238-6114	1	O-RING, -114, 90 Duro, .612″ ID x .103″ Thk
32	1272887C1	1	SPRING, poppet, spool
33	124771A1	1	POPPET, VALVE, spool
34	9992298	1	O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
35	1267163C1	1	SEAT, washer
36	1301633C1	2	COIL, solenoid
37	1301632C1	2	CAP, cover, coil
38	107825	2	NUT, Stamped, 1/2″-20
39	225-20210	2	NUT, #10-32, Brass
40	1301637C1	2	ORIFICE, valve
41	1282278C2	1	KIT, SEALS, valve, Includes 4, 6, 14, 31, 34

08-14 REEL DRIVE SYSTEM 1440E, 1460E AND 1480E COMBINE

Pos	Part no.	Qty	Description
1	1272633C91	1	PUMP, HYDRAULIC, reel drive, See Figure 08-17
2	86512179	2	BOLT, Hex Flg, 1/2″-13 x 1 1/2″, Serr
3	86512371	2	NUT, Flg, USR, 1/2″-13
4	1282383C1	1	FITTING, 1 5/8-12 x 1 flared
5	570186	1	O-RING, 20-1, 90 Duro, 1.475″ ID x .116″ Thk
6	84570	1	ELBOW, 90є, 7/8″-14, 37є x 1 1/16″-12, O-Ring
8	167266	1	O-RING, 12-1, 90 Duro, .924 ID x .116″ Thk
9	1315460C1	1	HOSE, pump pressure, 900 mm (35 inch) long, hydraulic, 1/2 ID
11	280275	2	BOLT, Hex, 5/16″-18 x 3 1/4″, G5
12	9635082	2	NUT, 5/16″-18, G5
13	10516674	2	WASHER, LOCK, 5/16″
14	1282369C91	1	VALVE, reel drive, See Figure 08-16
14	1282369C92	1	VALVE, reel drive, See Figure 08-16
15	198303C1	1	HOSE, reel drive suction, Cut From S118401X
16	86536660	2	CLAMP, HOSE, #16, 0.81/1.50 Type F Worm
17	164910	1	ELBOW, 90є, 7/8″-14, 37є x 7/8″-14, O-Ring
18	218-5106	1	ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, O-Ring
19	237-6008	1	O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
20	1317073C1	1	HOSE, 635 mm (25″) long, hydraulic, 1/2 ID
21	196746C1	1	TUBE, HYD, reel drive return, 1440E Combine, 1460E Combine
21	187830C1	1	TUBE, HYD, reel drive return, 1480E Combine
23	1312411C1	1	TUBE, reel drive return, 1460E Combine, 1440E Combine
23	1325306C1	1	TUBE, reel drive return, 1480E Combine
24	87557084	1	STRAP, CABLE, 14″ with stainless locking clip

08-15 REEL DRIVE SYSTEM 1440E, 1460E AND 1480E COMBINE

Pos	Part no.	Qty	Description
39	218-5062	1	CONNECTOR, HYD., 7/8″-14, 37є x 7/8″-14, O-Ring
40	395150R91	1	COUPLING, QUICK, FEMALE, self sealing, Alternate with A177478
40	A177478	1	COUPLING, QUICK, FEMALE, , Alternate with 395150R91
41	395149R1	1	COUPLING, QUICK, MALE, male, 7/8 inch NF, Alternate with 1272399C2
41	1272399C2	1	COUPLING, QUICK, MALE, self sealing, male, 7/8″ NF, Alternate with 395149R91
42	218-5060	1	CONNECTOR, HYD., 3/4″-16, 37є x 7/8″-14, O-Ring
43	196878C1	1	HOSE, 1422 mm (56″) long, hydraulic, 3/8 ID, 1460E Combine with 47 inch feeder, 1440E Combine
43	179411C1	1	HOSE, 1549 mm (61″) long, hydraulic, 3/8 ID, 1460E Combine with 54.5 inch feeder, 1480E Combine
44	1317169C1	1	HOSE, 686 mm (27″) long, hydraulic, 3/8 ID
45	1312410C1	1	TUBE, HYD, reel lift, 1460E Combine with 47 inch feeder, 1460E Combine with 54.5 inch feeder
46	187562C1	1	COUPLING, QUICK, MALE, 9/16″-18
47	9617873	1	O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
48	86625021	2	CLAMP, HOSE, #12, 0.69/1.25 Type F Worm

08-16 REEL DRIVE VALVE

Pos	Part no.	Qty	Description
0	1282369C91	1	VALVE, reel drive, Includes 2 – 8
0	1282369C92	1	VALVE, reel drive, Includes 2 – 8
3	1301336C1	1	MOTOR, ELECTRIC, , Includes 4, 5
4	165202	1	O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
5	9825770	2	O-RING, -011, 90 Duro, .301″ ID x .070″ Thk
6	1301996C1	1	VALVE, compensator
7	238-5016	1	O-RING, -016, 70 Duro, .614″ ID x .070″ Thk
8	86533411	3	BOLT, Hex, 1/4″-20 x 7/8″, G5, Full Thd

08-17 REEL DRIVE PUMP ASSEMBLY

Pos	Part no.	Qty	Description
0	1272633C91	1	PUMP, HYDRAULIC, reel drive, Includes 1- 23
0	1949288C1	1	REMAN-HYDRAUL PUMP, , Only for North America
0	1949289C1	1	CORE-HYDRAULIC PUMP, , Return Number
2	92586C1	1	KIT, SEALS, , Includes 7 – 17
13	238-6159	2	O-RING, -159, 90 Duro, 4.977″ ID x .103″ Thk
16	A25139	1	SEAL, shaft
17	100-21137	1	RING, SNAP, 1.375″, Int, #137
21	166-55	4	SCREW, 12 Pt Flg, 3/8″-16 x 3 1/2″, G8
22	166-59	4	SCREW, 12 Pt Flg, 3/8″-16 x 3 3/4″, G8
23	H233445	1	KEY

Parts list

Pos	Part no.	Qty	Description
1	1307620C1	1	TUBE, reel, 15.0 foot
1	1307621C1	1	TUBE, reel, 17.5 foot
1	1307622C1	1	TUBE, reel 20.0 foot
1	1307623C1	1	TUBE, reel, 22.5 foot
1	1307624C1	1	TUBE, reel 25.0 foot
2	185772C2	1	SHAFT, reel drive, RH
3	1316662C1	1	SHAFT, reel, LH
4	179108C1	10	SUPPORT, reel bat, LH
9	1307584C1	5	BAT, reel 15.0 foot
9	1307585C1	5	BAT, reel 17.5 foot
9	1307586C1	5	BAT, reel 20.0 foot
9	1307587C1	5	BAT, reel 22.5 foot
9	1307588C1	5	BAT, reel 25.0 foot
13	1308369C1	2	SUPPORT, reel shaft
14	413-652	4	BOLT, Hex, 3/8″-16 x 3 1/4″, G5
15	247780	4	NUT, Flg, USR, 3/8″-16
16	87414	3	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
17	277373A1	1	SUPPORT, bat reel, LH
19	633177R1	1	RETAINER, washer, cotter pin
20	80752	1	PIN, SPLIT (COTTER), 1/4″ x 2 1/2″
21	495-81094	1	WASHER, 1 25/32″ x 2 3/4″ x .048″
22	95-81057	1	WASHER, 1 25/32″ x 2 3/4″ x .120″
22	495-81089	2	WASHER, 1 21/32″ x 2 1/4″ x .120″
23	277370A2	1	SUPPORT, bat reel, RH
29	1316328C1	4	BUSHING, reel support
30	280505A1	4	SPACER, 3/4″
31	88043	4	BOLT, Hex, 1/2″-13 x 3 1/4″, G5
32	9636698	4	NUT, LOCK, 1/2″-13, GB
1	1307625C1	1	TUBE, reel 30.0 foot
2	184927C2	1	SHAFT, reel drive
3	1316663C1	1	SHAFT, reel, LH
4	184924C1	15	SUPPORT, reel bat, LH
6	184925C1	15	SUPPORT, reel bat, RH
7	135270	30	BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
8	145458	30	NUT, Flg, USR, 5/16″-18
9	1307589C1	5	BAT, reel 30 foot
10	477-82508	60	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 1/2″
11	20356	60	NUT, LOCK, 1/4″-20, GB
13	1308369C1	2	SUPPORT, reel shaft
14	413-652	4	BOLT, Hex, 3/8″-16 x 3 1/4″, G5
15	247780	4	NUT, Flg, USR, 3/8″-16
16	87414	2	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
17	277373A1	1	SUPPORT, bat reel, LH
19	633177R1	1	RETAINER, washer, cotter pin
20	80752	1	PIN, SPLIT (COTTER), 1/4″ x 2 1/2″
21	495-81094	1	WASHER, 1 25/32″ x 2 3/4″ x .048″
22	95-81057	1	WASHER, 1 25/32″ x 2 3/4″ x .120″
23	277370A2	1	SUPPORT, bat reel, RH
29	1316328C1	4	BUSHING, reel support
30	280505A1	4	SPACER, 3/4″
31	88043	4	BOLT, Hex, 1/2″-13 x 3 1/4″, G5
32	9636698	4	NUT, LOCK, 1/2″-13, GB
1	126798A1	10	SHIELD, reel end, BSN JJC0308544
2	297129A1	20	SPACER, bat reel
3	87716	20	BOLT, Hex, 1/4″-20 x 1 1/4″, G5
5	80682	20	WASHER, LOCK, 1/4″
6	477-73124	10	SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1 1/2″
7	295125A1	10	SPACER, bat reel
8	145458	10	NUT, Flg, USR, 5/16″-18
1	1979485C1	1	SHAFT, center, 17.5 foot
1	1316274C1	1	SHAFT, center (20.0 foot)
2	180602C1	4	PLATE, spider
3	167654C1	36	ARM, reel
4	424-520	24	BOLT, Hex, 5/16″-18 x 1 1/4″, G2
7	180507C1	2	HUB ASSY., eccentric roller, Includes 8
8	167666C1	2	BUSHING, roller frame
9	827703C1	2	BAR, slot adjusting
10	424-720	4	BOLT, Hex, 7/16″-14 x 1 1/4″, G2
11	280717	4	NUT, 7/16″-14, G5
14	81547	4	WASHER, LOCK, 7/16″
15	953254R1	2	NUT, LOCK, slot adjusting
16	88530	2	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 3/4″, G5
17	280431	2	NUT, 1/2″-13, G5
18	80679	2	WASHER, LOCK, 1/2″
19	87364	2	WASHER, 1/2″, SAE
20	80710	2	NIPPLE, LUBE, 1/8″-27 x .66 lg
22	180377C1	2	PLATE, spider
23	87872	12	BOLT, Hex, 5/16″-18 x 3/4″, G5, Full Thd
24	10516674	12	WASHER, LOCK, 5/16″
25	9635082	12	NUT, 5/16″-18, G5
26	167661C1	2	RING, eccentric control
30	598242R91	6	BEARING, ROLLER, ball
33	424-628	6	BOLT, Hex, 3/8″-16 x 1 3/4″, G2
35	80680	6	WASHER, LOCK, 3/8″
36	9628503	6	NUT, 3/8″-16, G5
37	180380C1	1	BRACKET, adjusting, LH, Not Shown
38	179231C2	1	BRACKET, adjusting, RH, Shown
40	167612C1	2	SPACER, driven hub
43	88043	4	BOLT, Hex, 1/2″-13 x 3 1/4″, G5
44	231-4118	4	NUT, LOCK, 1/2″-13, GB
47	180251C1	2	SHAFT, driving end
49	495-81089	4	WASHER, 1 21/32″ x 2 1/4″ x .120″
50	180400C91	2	COLLAR, W/SET SCREW, Includes 51
51	84-65	2	SET SCREW, Hex Soc, 3/8″-24 x 5/16″
56	180603C1	4	PLATE, stiffening
57	80280503	1	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
58	9637692	1	NUT, LOCK, 3/8″-16, GB
60	180787C1	36	SUPPORT, reel arm brace
61	280700	36	BOLT, CARRIAGE, Short NK, 1/4″-20 x 1/2″, G5, Full Thd
62	20356	36	NUT, LOCK, 1/4″-20, GB
1	1326602C1	1	SHAFT, center (15.0 foot)
1	1316273C1	1	SHAFT, center (17.5 foot)
1	1316274C1	1	SHAFT, center (20.0 foot)
1	1316275C1	1	SHAFT, center (22.5 foot)
1	1316276C1	1	SHAFT, center (25.0 foot)
1	1316277C1	1	SHAFT, center (30.0 foot)
7	114938A2	1	FRAME, eccentric roller
8	167666C1	4	BUSHING, roller frame
10	253430A1	1	SHIELD, eccentric with bearings, Includes 22, 23, 24, 25, 26, 12, 13
12	114951A1	12	BEARING, CUP tapered roller bearing (Female thread)
13	114952A1	12	BEARING, CONE tapered roller bearing (Male thread)
20	80720	2	NIPPLE, LUBE, 30є, 1/8″-27 NPT x .91″ lg
21	175571A3	1	HOUSING, eccentric roller
23	120104	12	BOLT, Hex, M8 x 20, 8.8
24	87016617	12	WASHER, LOCK, M8
25	43362	12	NUT, M8, Cl 10
26	167661C1	2	RING, eccentric control
30	114941A1	6	BEARING, NEEDLE
31	114942A1	12	SCREW, socket head, shoulder, special
32	100038	12	SAFETY NUT, M12 x 1.75, Cl 8
33	100037	6	NUT, M10 x 1.5, Cl 8
34	292108A1	4	SHIELD, eccentric roller plate HCC
35	11106231	4	BOLT, Hex, M10 x 25, 10.9, Full Thd
36	100037	4	NUT, M10 x 1.5, Cl 8
37	277363A1	1	BRACKET, pickup reel support, LH
38	277358A1	1	SUPPORT, bracket, pickup reel, RH
40	280505A1	4	SPACER, 3/4″
43	86508581	2	BOLT, Hex, M12 x 90, 8.8
44	100038	4	SAFETY NUT, M12 x 1.75, Cl 8
45	1316328C1	4	BUSHING, reel support
47	185519C1	1	SHAFT, driving end (15.0 and 17.5 foot)
47	185520C1	1	SHAFT, driving end (20.0 and 22.5 foot)
47	180134C1	1	SHAFT, driving end (25.0 and 30.0 foot)
48	185522C1	1	SHAFT, driven end (15.0 and 17.5 foot)
48	185523C1	1	SHAFT, driven end (20.0 and 22.5 Foot)
48	180135C1	1	SHAFT, driven end (25.0 and 30.0 foot)
49	495-81089	4	WASHER, 1 21/32″ x 2 1/4″ x .120″
50	114943A1	1	COLLAR, locking, Includes 51
51	878-1106	2	SET SCREW, Hex Soc, M10 x 6, Cup Pt
55	80280503	6	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
56	280234	1	BOLT, Hex, 1/2″-13 x 3″, G5, Full Thd
57	280431	1	NUT, 1/2″-13, G5
58	280262A1	1	SUPPORT, shield, outer
59	43158	2	BOLT, Hex, M12 x 80, 8.8
60	811-12040	2	BOLT, CARRIAGE, Short NK, M12 x 40, Cl8.8, Full Thd
61	337475	2	NUT, M12, Cl 10
62	114944A1	2	WASHER, SPRING, belleville, 12 mm
1	1989399C1	1	SHAFT, center tube (15.0 foot)
1	1989401C1	1	SHAFT, center tube (17.5 foot)
1	1994811C1	1	SHAFT, center tube (20.0 foot)
5	292108A1	2	SHIELD, eccentric roller plate HCC
7	114938A2	1	FRAME, eccentric roller
8	167666C1	2	BUSHING, roller frame
16	811-12040	1	BOLT, CARRIAGE, Short NK, M12 x 40, Cl8.8, Full Thd
17	337475	1	NUT, M12, Cl 10
19	114944A1	1	WASHER, SPRING, belleville, 12 mm
20	80720	1	NIPPLE, LUBE, 30є, 1/8″-27 NPT x .91″ lg
21	1989433C2	6	SHIELD, RH end
21	283590A1	6	GUARD, sheet, non eccentric end, Australia and Europe
23	120104	6	BOLT, Hex, M8 x 20, 8.8
24	87016617	6	WASHER, LOCK, M8
25	43362	6	NUT, M8, Cl 10
26	167661C1	1	RING, eccentric control
27	114951A1	6	BEARING, CUP tapered roller bearing (Female thread)
28	114952A1	6	BEARING, CONE tapered roller bearing (Male thread)
29	253430A1	1	SHIELD, eccentric with bearings, Includes 22 – 28
30	114941A1	3	BEARING, NEEDLE
33	114942A1	6	SCREW, socket head, shoulder, special
34	100038	6	SAFETY NUT, M12 x 1.75, Cl 8
36	100037	3	NUT, M10 x 1.5, Cl 8
37	277363A1	1	BRACKET, pickup reel support, LH
38	277361A2	1	BRACKET, pickup reel support, RH
39	280262A1	1	SUPPORT, shield, outer
40	280505A1	5	SPACER, 3/4″
43	88043	5	BOLT, Hex, 1/2″-13 x 3 1/4″, G5
44	9636698	5	NUT, LOCK, 1/2″-13, GB
45	1316328C1	4	BUSHING, reel support
47	1989426C2	1	SHAFT, driving end
48	1989424C2	1	SHAFT, driven end
49	495-81089	4	WASHER, 1 21/32″ x 2 1/4″ x .120″
50	114943A1	1	COLLAR, locking, Includes 51
51	878-1106	2	SET SCREW, Hex Soc, M10 x 6, Cup Pt
61	167666C1	2	BUSHING, roller frame
65	80720	1	NIPPLE, LUBE, 30є, 1/8″-27 NPT x .91″ lg
71	43140	8	BOLT, Hex, M10 x 30, 8.8, Full Thd
77	280234	1	BOLT, Hex, 1/2″-13 x 3″, G5, Full Thd
78	280431	1	NUT, 1/2″-13, G5
1	1347091C1	1	SHAFT, center, tube (22.5 foot)
1	1347092C1	1	SHAFT, center, tube (25.0 foot)
1	1347093C1	1	SHAFT, center, tube (30.0 foot)
5	292108A1	2	SHIELD, eccentric roller plate HCC
7	114938A2	1	FRAME, eccentric roller
8	167666C1	4	BUSHING, roller frame
9	175571A3	1	HOUSING, eccentric roller
16	811-12040	2	BOLT, CARRIAGE, Short NK, M12 x 40, Cl8.8, Full Thd
17	337475	2	NUT, M12, Cl 10
19	114944A1	2	WASHER, SPRING, belleville, 12 mm
20	80720	2	NIPPLE, LUBE, 30є, 1/8″-27 NPT x .91″ lg
23	120104	12	BOLT, Hex, M8 x 20, 8.8
24	87016617	12	WASHER, LOCK, M8
25	43362	12	NUT, M8, Cl 10
26	167661C1	2	RING, eccentric control
27	114951A1	12	BEARING, CUP tapered roller bearing (Female thread)
28	114952A1	12	BEARING, CONE tapered roller bearing (Male thread)
29	253430A1	1	SHIELD, eccentric with bearings, Includes 22 – 28
30	114941A1	6	BEARING, NEEDLE
33	114942A1	12	SCREW, socket head, shoulder, special
34	100038	12	SAFETY NUT, M12 x 1.75, Cl 8
36	100037	6	NUT, M10 x 1.5, Cl 8
37	277363A1	1	BRACKET, pickup reel support, LH
38	277358A2	1	BRACKET, pickup reel support, RH
39	280262A1	1	SUPPORT, shield, outer
40	280505A1	5	SPACER, 3/4″
43	88043	5	BOLT, Hex, 1/2″-13 x 3 1/4″, G5
44	9636698	5	NUT, LOCK, 1/2″-13, GB
45	1316328C1	4	BUSHING, reel support
47	1989428C2	1	SHAFT, driving end
48	1989425C2	1	SHAFT, driven end
49	495-81089	4	WASHER, 1 21/32″ x 2 1/4″ x .120″
50	114943A1	1	COLLAR, locking, Includes 51
51	878-1106	2	SET SCREW, Hex Soc, M10 x 6, Cup Pt
71	43140	8	BOLT, Hex, M10 x 30, 8.8, Full Thd
77	280234	1	BOLT, Hex, 1/2″-13 x 3″, G5, Full Thd
78	280431	1	NUT, 1/2″-13, G5
1	427452A1	1	SHAFT, 15.0 foot center tube
1	427454A1	1	SHAFT, 17.5 foot center tube
1	427455A1	1	SHAFT, 20.0 foot center tube
1	427456A1	1	SHAFT, 22.5 foot center tube
1	427457A1	1	SHAFT, 25.0 foot center tube
1	427458A1	1	SHAFT, 30.0 foot center tube
11	1989433C2	6	SHIELD, RH end
13	277363A1	1	BRACKET, pickup reel support, LH
14	277361A2	1	BRACKET, pickup reel support, RH
14	277358A2	1	BRACKET, pickup reel support, RH
15	1316328C1	4	BUSHING, reel support
16	280505A1	3	SPACER, 3/4″
17	88043	3	BOLT, Hex, 1/2″-13 x 3 1/4″, G5
18	9636698	3	NUT, LOCK, 1/2″-13, GB
19	427411A1	1	SHAFT, driving end, 15.0, 20.0 and 22.5 foot
19	291313A1	1	SHAFT, drive end HCC ML LVL2 pickup reel
20	427412A1	1	SHAFT, driven end 8″ OD
21	495-81089	4	WASHER, 1 21/32″ x 2 1/4″ x .120″
22	167666C1	4	BUSHING, roller frame
23	114938A2	1	FRAME, eccentric roller
24	80720	1	NIPPLE, LUBE, 30є, 1/8″-27 NPT x .91″ lg
25	114943A1	1	COLLAR, locking, Includes 26
26	878-1106	2	SET SCREW, Hex Soc, M10 x 6, Cup Pt
27	280262A1	1	SUPPORT, shield, outer
29	114951A1	6	BEARING, CUP tapered roller bearing (Female thread)
30	114952A1	6	BEARING, CONE tapered roller bearing (Male thread)
31	114942A1	6	SCREW, socket head, shoulder, special
32	100038	6	SAFETY NUT, M12 x 1.75, Cl 8
33	167661C1	1	RING, eccentric control
34	120104	6	BOLT, Hex, M8 x 20, 8.8
35	87016617	6	WASHER, LOCK, M8
36	43362	6	NUT, M8, Cl 10
37	114941A1	3	BEARING, NEEDLE
38	811-12040	1	BOLT, CARRIAGE, Short NK, M12 x 40, Cl8.8, Full Thd
39	114944A1	1	WASHER, SPRING, belleville, 12 mm
40	337475	1	NUT, M12, Cl 10
41	292108A1	2	SHIELD, eccentric roller plate HCC, BSN JJC0308544
42	11106231	4	BOLT, Hex, M10 x 25, 10.9, Full Thd
43	100037	4	NUT, M10 x 1.5, Cl 8
45	280234	1	BOLT, Hex, 1/2″-13 x 3″, G5, Full Thd
46	280431	1	NUT, 1/2″-13, G5
47	253430A1	1	SHIELD, eccentric with bearings, Includes 28 – 30
1	1326605C91	12	BAT, with steel tines (15.0 foot), Includes 13, 14, 15
2	1316258C91	6	BAT, with steel tines (17.5 foot), Includes 13, 14, 15
3	1316259C91	12	BAT, with steel tines (17.5 and 20.0 foot), Includes 13, 14, 15
4	1316259C91	6	BAT, with steel tines (17.5 and 20.0 foot), Includes 13, 14, 15
5	1316260C91	12	BAT, with steel tines (20.0 foot), Includes 13, 14, 15
6	1316265C91	6	BAT, with steel tines (22.5 foot), Includes 13, 14, 15
7	185864C91	12	BAT, with steel tines (22.5 foot), Includes 13, 14, 15
8	598170R91	12	BAT, with steel tines (25.0 foot), Includes 13, 14, 15
9	167676C91	12	BAT, with steel tines (25.0 foot), Includes 13, 14, 15
10	1316264C91	12	BAT, with steel tines (30.0 foot), Includes 13, 14, 15
11	1316265C91	12	BAT, with steel tines (22.5 foot), Includes 13, 14, 15
18	1326604C1	6	SHAFT, bat (15.0 foot)
18	1316267C1	6	SHAFT, bat (17.5 foot)
18	1316268C1	6	SHAFT, bat (20.0 foot)
18	1316269C1	6	SHAFT, bat (22.5 foot)
18	1316270C1	6	SHAFT, bat (25.0 foot)
18	1316271C1	6	SHAFT, bat (30.0 foot)
19	1316568C1	12	SPACER, .51 X .84 X 1.12 tube, 52 Inch Reel With Steel Tines
20	9706716	12	BOLT, Hex, 1/2″-13 x 2″, G5, , 52 Inch Reel With Steel Tines
21	495-81024	12	WASHER, 17/32″ x 1 1/4″ x .060″
24	231-4118	12	NUT, LOCK, 1/2″-13, GB
1	427438A1	3	TINE BAR, 15.0 foot with retainer outboard, Includes 3 (15)
1	427442A1	3	TINE BAR, 17.5 foot with retainer outboard, Includes 3 (18)
1	427444A1	3	TINE BAR, 20.0 foot with retainer outboard, Includes 3 (21)
1	427447A1	3	TINE BAR, 22.5 foot with retainer outboard, Includes 3 (24)
1	427448A1	3	TINE BAR, 25.0 foot with retainer outboard, Includes 3 (25)
1	427451A1	3	TINE BAR, 30.0 foot with retainer outboard, Includes 3 (32)
2	427439A1	3	TINE BAR, 15.0 foot with retainer inboard, Includes 3 (17), 4
2	427443A1	3	TINE BAR, 17.5 foot with retainer inboard, Includes 3 (20), 4
2	427445A1	3	TINE BAR, 20.0 foot with retainer inboard, Includes 3 (22), 4
2	427446A1	3	TINE BAR, 22.5 foot with retainer inboard, Includes 3 (25), 4
2	427449A1	3	TINE BAR, 25.0 foot with retainer inboard, Includes 3 (27), 4
2	427450A1	3	TINE BAR, 30.0 foot with retainer inboard, Includes 3 (32), 4
4	430501A1	1	PLUG, plastic 12.7 OD x 10.3 ID
1	1989429C1	6	TUBE, tine support (15.0 foot)
1	1989431C1	6	TUBE, tine support (17.5 foot)
1	1994813C1	6	TUBE, tine support (20.0 foot)
1	1347080C1	6	TUBE, tine support (22.5 foot)
1	1347081C1	6	TUBE, tine support (25.0 foot)
1	1347082C2	6	TUBE, tine support (30.0 foot)
2	1347094C1	6	BRACKET, crank arm, LH
3	1347095C1	6	ARM, crank arm, RH (double eccentric)
8	126173A1	6	SCREW, SELF TAP, hex washer head, slotted, special, 3.5 x 1.3 x 16 mm
10	126173A1	6	SCREW, SELF TAP, hex washer head, slotted, special, 3.5 x 1.3 x 16 mm
12	126173A1	6	SCREW, SELF TAP, hex washer head, slotted, special, 3.5 x 1.3 x 16 mm
14	126173A1	10	SCREW, SELF TAP, hex washer head, slotted, special, 3.5 x 1.3 x 16 mm
1	427425A1	6	TUBE, bat 15.0 foot plastic tine
1	427427A1	6	TUBE, bat 17.5 foot plastic tine
1	427428A1	6	TUBE, bat 20.0 foot plastic tine
1	427429A1	6	TUBE, bat 22.5 foot plastic tine
1	427430A1	6	TUBE, bat 25.0 foot plastic tine
1	427431A1	6	TUBE, bat 30.0 foot plastic tine
3	126173A1	10	SCREW, SELF TAP, hex washer head, slotted, special, 3.5 x 1.3 x 16 mm
5	126173A1	10	SCREW, SELF TAP, hex washer head, slotted, special, 3.5 x 1.3 x 16 mm
7	126173A1	10	SCREW, SELF TAP, hex washer head, slotted, special, 3.5 x 1.3 x 16 mm
9	126173A1	10	SCREW, SELF TAP, hex washer head, slotted, special, 3.5 x 1.3 x 16 mm
1	592627R21	1	STRAP, finger
2	167652C1	1	TINE, LH
3	167605C91	6	TINE, auxiliary pickup, LH, Includes 1, 2
4	167606C91	6	TINE, auxiliary pickup, RH, Includes 5, 6
5	592627R21	1	STRAP, finger
6	167651C1	1	TINE, RH
7	598246R1	12	SPACER, 9/16 ID x 1 1/4″
7	1316568C1	12	SPACER, .51 X .84 X 1.12 tube, Used With 52 Inch Reel
8	827385C1	12	BOLT, round head hex shank, special, 1/2 NF x 2 1/2″
8	9706716	12	BOLT, Hex, 1/2″-13 x 2″, G5, , Used With 52 Inch Reel
9	827386C1	12	NUT, LOCK, hex flange, 1/2″ NF
10	87364	12	WASHER, 1/2″, SAE
10	495-81024	12	WASHER, 17/32″ x 1 1/4″ x .060″
10	80700	12	WASHER, 1/2″, , Used With 52 Inch Reel
11	598234R1	36	BASE, bearing, Used With 52 Inch Reel
12	598235R1	36	CAP, BEARING, Used With 52 Inch Reel
13	598236R1	36	U-BOLT, 1/4 x 2″, Used With 52 Inch Reel
14	20356	72	NUT, LOCK, 1/4″-20, GB, , Used With 52 Inch Reel
1	827385C1	12	BOLT, round head hex shank, special, 1/2 NF x 2 1/2″
2	598246R1	12	SPACER, 9/16 ID x 1 1/4″
3	1970591C1	12	RETAINER, auxiliary tine
4	1970590C1	12	TINE, plastic, auxiliary
5	1970592C1	12	SUPPORT, auxiliary tine
6	827386C1	12	NUT, LOCK, hex flange, 1/2″ NF
1	130409A1	1	MOTOR, HYDRAULIC, reel drive, See figure 8-06
2	9707516	2	BOLT, Hex, 1/2″-13 x 1 3/4″, G5
3	129-857	2	NUT, Sq, 1/2″-13
4	396-41053	2	WASHER, 17/32″ x 1 1/4″ x .188″, HDN
5	1308371C2	1	SHIM, hydraulic reel drive motor
6	129973A2	1	SPROCKET, driven, 51 tooth, BSN JJC0308544
7	280251	2	PIN, SPLIT (COTTER), 3/32″ x 1″
8	27-7278	2	PIN, CLEVIS, 7/16″ x 2.781″, , BSN JJC0308544
9	241-1315	1	LINK, CONNECTING, #50 single pitch
9	241-1715	2	LINK, CONNECTING, #50 single pitch offset
10	129967A1	1	SPROCKET, drive, 17 tooth, BSN JJC0308544
11	23236R1	2	SET SCREW, Hex Soc, 3/8″-24 x 3/8″
12	47471	1	WOODRUFF KEY, #15, 1/4″ x 1″, HT
15	129988A4	1	SUPPORT ASSY., hydraulic reel drive motor
17	280234	1	BOLT, Hex, 1/2″-13 x 3″, G5, Full Thd
18	280431	1	NUT, 1/2″-13, G5
19	80679	2	WASHER, LOCK, 1/2″
1	130409A1	1	MOTOR, HYDRAULIC, reel drive, See Figure 08-06
2	9707516	2	BOLT, Hex, 1/2″-13 x 1 3/4″, G5
3	129-857	2	NUT, Sq, 1/2″-13
4	396-41053	2	WASHER, 17/32″ x 1 1/4″ x .188″, HDN
5	1308371C1	1	SHIM, bar, motor
5	1308371C2	1	SHIM, hydraulic reel drive motor
6	129973A2	1	SPROCKET, driven, 51 tooth, BSN JJC0308544
7	280251	2	PIN, SPLIT (COTTER), 3/32″ x 1″
8	27-7278	2	PIN, CLEVIS, 7/16″ x 2.781″, , BSN JJC0308544
9	241-1315	1	LINK, CONNECTING, #50 single pitch
9	241-1715	2	LINK, CONNECTING, #50 single pitch offset
10	129967A1	1	SPROCKET, drive, 17 tooth, BSN JJC0308544
10	1979794C1	1	SPROCKET, reel drive, 13T
10	1316618C1	1	SPROCKET, reel drive, 21T
11	484-1386	2	SET SCREW, Hex Soc, 3/8″-24 x 3/8″
12	47471	1	WOODRUFF KEY, #15, 1/4″ x 1″, HT
17	280234	1	BOLT, Hex, 1/2″-13 x 3″, G5, Full Thd
18	280431	1	NUT, 1/2″-13, G5
19	80679	2	WASHER, LOCK, 1/2″
1	258980A1	1	SUPPORT, reel drive shield, inner
2	86624075	2	PIN, HEADED, 1/4″ x 1 3/4″, G2
3	280250	2	PIN, SPLIT (COTTER), 3/32″ x 3/4″
4	258981A1	1	SHIELD, reel drive
5	291944A1	1	LATCH, reel drive shield
6	465593R1	1	SPACER, 3/8″ Pipe x 2 1/2″
7	280262A1	1	SUPPORT, shield, outer
8	280275	1	BOLT, Hex, 5/16″-18 x 3 1/4″, G5
9	145458	1	NUT, Flg, USR, 5/16″-18
13	291637A1	1	SUPPORT, shield latch access
14	151-506	4	RIVET, Pop, 1/8″ x .400″, Stainless
15	292035A1	4	WASHER, rivet back-up
16	291945A1	1	LATCH, reel drive shield
1	304197A1	1	ARM, reel support LH, Includes 2
2	296796A1	2	DECAL, auger lift bracket
3	304198A1	1	ARM, reel support RH, Includes 2
4	128428A3	2	SUPPORT, brace, reel arm, BSN JJC0308544
5	87339	4	BOLT, Hex, 1/2″-13 x 3″, G5
6	231-4118	4	NUT, LOCK, 1/2″-13, GB
7	86979987	2	PIN, HEADED, 1/2″ x 3″, G5
8	394818	2	PIN, SPLIT (COTTER), M5 x 25
9	1320928C1	2	ROD, stand support
13	87362	2	WASHER, 5/16″ SAE
14	80756	2	PIN, SPLIT (COTTER), 1/8″ x 3/4″
15	1305175C4	2	BRACKET, reflector
17	128723A2	1	HYDRAULIC CYLINDER, 1 1/2″ x 9 3/8″, Reel Lift Master, See Figure 08-09, BSN JJC0308544
18	128726A1	1	HYDRAULIC CYLINDER, 1 x 9 3/8″, Reel Lift Slave, See Figure 08-10, BSN JJC0308544
20	394818	2	PIN, SPLIT (COTTER), M5 x 25
23	86979987	2	PIN, HEADED, 1/2″ x 3″, G5
24	9627879	2	BOLT, Hex, 1/2″-13 x 3/4″, G5, Full Thd
25	1320927C2	2	ROD, cylinder adjusting, BSN JJC0308544
26	87045537	2	SPLIT PIN/SAFETY PIN, .148 x 3 5/16″
27	396-41066	2	WASHER, 21/32″ x 1 1/2″ x .188″, HDN
28	1316193C1	2	PLUG, button, BSN JJC0308544
29	128729A1	2	TUBE, reel arm adjusting, BSN JJC0308544
30	144672A2	1	SUPPORT, lift cylinder, LH, with decal, Includes 31, BSN JJC0308544
30	144673A2	1	SUPPORT, lift cylinder, RH, with decal, Includes 31, BSN JJC0308544
31	185067A1	1	DECAL, warning, avoid injury, always lock both reel lift cylinders, See Figure 09D-13
32	128427A1	2	SPACER, reel arm
33	88007	2	BOLT, Hex, 3/4″-10 x 4 1/2″, G5
34	231-41112	2	NUT, LOCK, 3/4″-10, GB
35	496-21081	2	WASHER, 13/16″ x 1 1/2″ x .179″, HDN
36	128426A1	2	SPACER, reel arm strap
37	9627896	2	BOLT, Hex, 5/8″-11 x 1 3/4″, G5
38	85700693	2	NUT, LOCK, 5/8″-11, GC
39	496-41066	4	WASHER, 21/32″ x 1 1/2″ x .188″, HDN, , BSN JJC0308544
40	183064A1	2	SHIELD, auger lift bracket, See Figure 09C-05, BSN JJC0308544
1	189459C3	1	SHIELD, pump drive, 1460E Combine with 47 inch feeder, 1440E Combine with 47 inch feeder
1	189460C3	1	SHIELD, pump drive, 1460E Combine with 54.5 inch feeder, 1480E Combine with 54.5 inch feeder
2	189470C1	1	SUPPORT, shield, upper LH
6	197646C1	1	SHIELD, feeder jackshaft LH, 1460E Combine with 47 inch feeder, 1440E Combine with 47 inch feeder
7	189730C1	1	SHIELD, feeder jackshaft LH, 1460E Combine with 54.5 inch feeder, 1480E Combine with 54.5 inch
9	477-82508	4	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 1/2″
10	523282	4	NUT, Flg, USR, 1/4″-20
13	203672C1	1	SUPPORT, shield, lower, 1480E Combine with 54.5 inch feeder
14	189468C2	1	SUPPORT, shield, lower rear, 1460E Combine with 47 inch feeder, 1440E Combine with 47 inch feeder
15	189469C1	1	SUPPORT, shield, lower rear, 1460E Combine with 54.5 inch feeder, 1480E Combine with 54.5 inch
16	189464C2	1	SUPPORT, shield, upper front
21	189466C1	1	SUPPORT, shield, upper rear
23	198409C2	1	SUPPORT, reel drive pump
28	176562C2	1	PULLEY, drive, feeder jackshaft pump, 13-1/2″ OD
29	Q1497	1	KEY, Gib, 3/8″ Sq x 2″
30	197414C2	1	BELT, reel drive, 146″, 1460E Combine with 54.5 inch feeder, 1480E Combine with 54.5 inch feeder
30	197411C1	1	BELT, reel drive, 132″, 1460E Combine with 47 inch feeder, 1440E Combine with 47 inch feeder
31	195528C92	1	ARM, pump tightener, Includes 32
32	583346R1	2	BUSHING, tightener arm
33	87414	1	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
34	198410C1	1	SPACER, tightener arm
35	86977740	1	BOLT, Hex, 5/8″-11 x 4″, G5
36	495-81026	1	WASHER, 21/32″ x 1 1/2″ x .060″
37	86624169	1	WASHER, 1 1/32″ x 1 1/2″ x .060″
38	86624170	1	WASHER, 1 1/32″ x 1 1/2″ x .120″
39	231-51410	1	NUT, Flg, USR, 5/8″-11
42	674966R91	1	PULLEY, idler, belt, 8-3/4″ OD
43	424-1080	1	BOLT, Hex, 5/8″-11 x 5″, G2
44	495-81175	1	WASHER, 21/32″ x 1″ x .120″
45	86729275	1	WASHER, LOCK, 5/8″
46	280374	1	NUT, 5/8″-11, G5
47	193252C1	1	PULLEY, pump driven, 7.5″ OD, 7/8″ ID
52	195526C1	1	SUPPORT, pivot anchor, 1440E Combine with 47 inch feeder, 1460E Combine with 47 inch feeder
52	195527C1	1	SUPPORT, pivot anchor, 1480E Combine with 54.5 inch feeder
57	195531C1	1	SUPPORT, spring anchor
60	167570C1	1	CHAIN, finger stop
61	86505867	1	BOLT, Hex, 1/4″-20 x 1″, G5
62	87361	2	WASHER, 1/4″, SAE
63	80682	1	WASHER, LOCK, 1/4″
1	195528C92	1	ARM, pump tightener, Includes 2
2	583346R1	2	BUSHING, tightener arm
3	87414	1	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
4	674966R91	1	PULLEY, idler, belt, 8-3/4″ OD
5	424-1080	1	BOLT, Hex, 5/8″-11 x 5″, G2
6	495-81175	1	WASHER, 21/32″ x 1″ x .120″
7	86729275	1	WASHER, LOCK, 5/8″
8	280374	2	NUT, 5/8″-11, G5
12	193252C1	1	PULLEY, pump driven, 7.5″ OD, 7/8″ ID
13	87616	2	SET SCREW, Sq Hd, 3/8″-16 x 3/4″
14	87016560	2	NUT, Jam, 3/8″-16, G5
15	1315461C1	1	BRACKET, reel speed valve
16	145913	2	BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
17	413-522	2	BOLT, Hex, 5/16″-18 x 1 3/8″, G5
18	10516674	2	WASHER, LOCK, 5/16″
19	145458	2	NUT, Flg, USR, 5/16″-18
20	9635082	2	NUT, 5/16″-18, G5
23	1301176C2	1	SWITCH, reel speed
2	129305A1	1	CUTTERBAR, 15.0 foot
2	129306A1	1	CUTTERBAR, 17.5 foot, BSN JJC0308544
2	129307A1	1	CUTTERBAR, 20.0 foot, BSN JJC0308544
2	129308A1	1	CUTTERBAR, 22.5 foot
2	87450131	1	CUTTERBAR, 25.0 foot
2	129310A1	1	CUTTERBAR, 30.0 foot, BSN JJC0308544
7	434-724	6	BOLT, CARRIAGE, Short NK, 7/16″-14 x 1 1/2″, G5. Full Th
14	326-1044	2	BOLT, Hex, 5/8″-11 x 2 3/4″, G8
15	396-41066	2	WASHER, 21/32″ x 1 1/2″ x .188″, HDN
20	112428A1	2	CLIP, KNIFE, hold down LH 1 1/2″
2	129305A1	1	CUTTERBAR, 15.0 foot
2	129306A1	1	CUTTERBAR, 17.5 foot, BSN JJC0308544
2	129307A1	1	CUTTERBAR, 20.0 foot, BSN JJC0308544
2	129308A1	1	CUTTERBAR, 22.5 foot
2	87450131	1	CUTTERBAR, 25.0 foot
2	129310A1	1	CUTTERBAR, 30.0 foot, BSN JJC0308544
5	1326787C3	3	GUARD, knife 3″ special LH, BSN JJC0308544
13	280355	2	BOLT, Hex, 5/8″-11 x 2 1/4″, G8
14	396-41066	2	WASHER, 21/32″ x 1 1/2″ x .188″, HDN
20	375900A1	1	CLIP, KNIFE, hold down LH 3″
21	379093A1	3	SHIM, 3″ knife, head hold down
1	1970504C6	1	KNIFE ASSY, 17.5 foot, Includes 2 – 16
1	1970400C5	1	KNIFE ASSY, 20.0 foot, Includes 2 – 16
3	1313795C94	1	HEAD, KNIFE, , Includes 4
3	1313795C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
5	86637930	1	NUT, SLOTTED, 5/8″-18, G5
7	80708	1	PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
8	1313797C1	1	BLOCK, knife head
8	1313797C2	1	BLOCK, knife head
9	87414	1	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
13	1970506C1	16	BOLT, CARRIAGE, #12-24 x 1 1/8″
14	1954816C1	16	NUT, LOCK, hex lock, No. 12-24
17	280355	1	BOLT, Hex, 5/8″-11 x 2 1/4″, G8
18	396-21066	1	WASHER, 21/32″ x 1 5/16″ x .150″, HDN
19	88546	1	BOLT, Hex, 3/8″-16 x 2 1/4″, G5, , For bolting extra knife to header
20	80702	1	WASHER, 3/8″, , For bolting extra knife to header
21	247780	1	NUT, Flg, USR, 3/8″-16, , For bolting extra knife to header
1	398746A1	1	KNIFE ASSY, 1 1/2″ coarse, 15.0 foot, Includes 2 – 16
1	398746A2	1	KNIFE ASSY, 1 1/2″ coarse with autotemp, 15.0 foot, Includes 2 – 16
1	398748A1	1	KNIFE ASSY, 1 1/2″ coarse, 17.5 foot, Includes 2 – 16
1	398748A2	1	KNIFE ASSY, 1 1/2″ coarse with autotemp, 17.5 foot, Includes 2 – 16
1	398749A1	1	KNIFE ASSY, 1 1/2″ coarse, 20.0 foot, Includes 2 – 16
1	398749A2	1	KNIFE ASSY, 1 1/2″ 20.0 foot, Includes 2 – 16
1	398750A1	1	KNIFE ASSY, 1 1/2″ coarse, 22.5 foot, Includes 2 – 16
1	398750A2	1	KNIFE ASSY, 1 1/2″ coarse, 22.5 foot, Includes 2 – 16
1	398751A1	1	KNIFE ASSY, 1 1/2″ coarse with autotemp, 25.0 foot, Includes 2 – 16
1	398751A2	1	KNIFE ASSY, 1 1/2″ 25.0 foot, Includes 2 – 16
1	398752A1	1	KNIFE ASSY, 1 1/2″ coarse, 30.0 foot, Includes 2 – 16
1	398752A2	1	KNIFE ASSY, 1 1/2″ 30.0 foot, Includes 2 – 16
3	1313795C94	1	HEAD, KNIFE, , Includes 4
3	1313795C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
5	86637930	1	NUT, SLOTTED, 5/8″-18, G5
7	80708	1	PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
8	1313797C1	1	BLOCK, knife head
8	1313797C2	1	BLOCK, knife head
9	87414	1	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
13	1970506C1	16	BOLT, CARRIAGE, #12-24 x 1 1/8″
14	1954816C1	16	NUT, LOCK, hex lock, No. 12-24
17	280355	1	BOLT, Hex, 5/8″-11 x 2 1/4″, G8
18	396-21066	1	WASHER, 21/32″ x 1 5/16″ x .150″, HDN
19	88546	1	BOLT, Hex, 3/8″-16 x 2 1/4″, G5, , For bolting extra knife to header
20	80702	1	WASHER, 3/8″, , For bolting extra knife to header
21	247780	1	NUT, Flg, USR, 3/8″-16, , For bolting extra knife to header
1	1307281C99	1	KNIFE ASSY, 3″, 15.0 foot, Includes 2 – 17
1	87439540	1	KNIFE ASSY, 3″ coarse, 15.0 foot, Includes 2 – 17
1	87439542	1	KNIFE ASSY, 3″ coarse, 17.5 foot, Includes 2 – 17
1	1307283C99	1	KNIFE ASSY, 3″, 20.0 foot, Includes 2 – 17
1	87439543	1	KNIFE ASSY, 3″ coarse, 20.0 foot, Includes 2 – 17
1	1307284C99	1	KNIFE ASSY, 3″, 22.5 foot, Includes 2 – 17
1	87439544	1	KNIFE ASSY, 3″ coarse, 22.5 foot, Includes 2 – 17
1	376534A1	1	KNIFE ASSY, 3″ bolted coarse 25′, Includes 2 – 17, See Figure 09B-20 For Modular Knives
1	376535A1	1	KNIFE ASSY, 3″ bolted coarse 30′, See Figure 09B-20 For Modular Knives, Includes 2 – 17
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
5	86637930	1	NUT, SLOTTED, 5/8″-18, G5
7	80708	1	PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
10	1313797C1	1	BLOCK, knife head
10	1313797C2	1	BLOCK, knife head
11	87414	1	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
13	324070A1	1	KNIFE SECTION, RH end
14	1316030C2	1	KNIFE SECTION, 3″, plain half
15	1979166C1	16	SCREW, #12-24 x 1 1/8″
17	1954816C1	9	NUT, LOCK, hex lock, No. 12-24
18	227455A1	1	STRAP, knife back reinforcement, if used
19	227456A1	3	SCREW, #12-24 x 1 1/4″ CSK HSKT
20	227457A1	6	SCREW, #12-24 x .13/16″ CSK HSKT
21	227213A1	1	KIT, knife back reinforcement, Includes 17 – 20
22	280355	1	BOLT, Hex, 5/8″-11 x 2 1/4″, G8
23	396-21066	1	WASHER, 21/32″ x 1 5/16″ x .150″, HDN
1	1307281C99	1	KNIFE ASSY, 3″, 15.0 foot, Includes 2 – 17
1	87439540	1	KNIFE ASSY, 3″ coarse, 15.0 foot, Includes 2 – 17
1	87439542	1	KNIFE ASSY, 3″ coarse, 17.5 foot, Includes 2 – 17
1	1307283C99	1	KNIFE ASSY, 3″, 20.0 foot, Includes 2 – 17
1	87439543	1	KNIFE ASSY, 3″ coarse, 20.0 foot, Includes 2 – 17
1	1307284C99	1	KNIFE ASSY, 3″, 22.5 foot, Includes 2 – 17
1	87439544	1	KNIFE ASSY, 3″ coarse, 22.5 foot, Includes 2 – 17
1	376534A1	1	KNIFE ASSY, 3″ bolted coarse 25′, Includes 2 – 17, See Figure 09B-20 For Modular Knives
1	376534A2	1	KNIFE ASSY, 3″ bolted coarse 25′, See Figure 09B-20 For Modular Knives, Includes 2 – 17
1	376534A3	1	KNIFE ASSY, 3″ coarse, 25.0 foot, Includes 2 – 17, See Figure 09B-20 For Modular Knives
1	376535A1	1	KNIFE ASSY, 3″ bolted coarse 30′, See Figure 09B-20 For Modular Knives, Includes 2 – 17
1	376535A2	1	KNIFE ASSY, 3″ bolted coarse 30′, Includes 2 – 17, See Figure 09B-20 For Modular Knives
1	376535A3	1	KNIFE ASSY, 3″ coarse, 30.0 foot, See Figure 09B-20 For Modular Knives, Includes 2 – 17
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
5	86637930	1	NUT, SLOTTED, 5/8″-18, G5
7	80708	1	PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
10	1313797C1	1	BLOCK, knife head
10	1313797C2	1	BLOCK, knife head
11	87414	1	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
13	148200C1	1	KNIFE SECTION, overserrated, double right-hand
14	1316030C2	1	KNIFE SECTION, 3″, plain half
15	1979166C1	16	SCREW, #12-24 x 1 1/8″
22	280355	1	BOLT, Hex, 5/8″-11 x 2 1/4″, G8
23	396-21066	1	WASHER, 21/32″ x 1 5/16″ x .150″, HDN
26	321849A1	1	KIT, reinforcing strap for 3″ knives, Includes 17, 24, 25
26	321849A2	1	KIT, reinforcing strap for 3″ knives, Includes 17, 24, 25
1	230600A2	1	KNIFE ASSY, 3″ fine, bolted, 15.0 foot, Includes 2 – 17
1	451824A1	1	KNIFE ASSY, 3″ fine, 15.0 foot, Includes 2 – 17
1	451824A2	1	KNIFE ASSY, 3″ fine, 15.0 foot, Includes 2 – 17
1	230601A2	1	KNIFE ASSY, 3″ fine, bolted, 17.5 foot, Includes 2 – 17
1	230602A2	1	KNIFE ASSY, 3″ fine, bolted, 20.0 foot, Includes 2 – 17
1	230603A2	1	KNIFE ASSY, 3″ fine, bolted, 22.5 foot, Includes 2 – 17
1	230604A3	1	KNIFE ASSY, 3″ fine, bolted, 25.0 foot, Includes 2 – 17
1	226433A3	1	KNIFE ASSY, 3″ fine, bolted, 30.0 foot, Includes 2 – 17
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
5	86637930	1	NUT, SLOTTED, 5/8″-18, G5
7	80708	1	PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
10	1313797C1	1	BLOCK, knife head
10	1313797C2	1	BLOCK, knife head
11	87414	1	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
13	324070A1	1	KNIFE SECTION, RH end
14	1316030C2	1	KNIFE SECTION, 3″, plain half
15	1979166C1	16	SCREW, #12-24 x 1 1/8″
18	227455A1	1	STRAP, knife back reinforcement, if used
19	227456A1	3	SCREW, #12-24 x 1 1/4″ CSK HSKT
20	227457A1	6	SCREW, #12-24 x .13/16″ CSK HSKT
21	227213A1	1	KIT, knife back reinforcement, Includes 17 – 20
22	280355	1	BOLT, Hex, 5/8″-11 x 2 1/4″, G8
23	396-21066	1	WASHER, 21/32″ x 1 5/16″ x .150″, HDN
1	230600A2	1	KNIFE ASSY, 3″ fine, bolted, 15.0 foot, Includes 2 – 17
1	230601A2	1	KNIFE ASSY, 3″ fine, bolted, 17.5 foot, Includes 2 – 17
1	230602A2	1	KNIFE ASSY, 3″ fine, bolted, 20.0 foot, Includes 2 – 17
1	230603A2	1	KNIFE ASSY, 3″ fine, bolted, 22.5 foot, Includes 2 – 17
1	230604A3	1	KNIFE ASSY, 3″ fine, bolted, 25.0 foot, Includes 2 – 17
1	226433A3	1	KNIFE ASSY, 3″ fine, bolted, 30.0 foot, Includes 2 – 17
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
5	86637930	1	NUT, SLOTTED, 5/8″-18, G5
7	80708	1	PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
10	1313797C1	1	BLOCK, knife head
10	1313797C2	1	BLOCK, knife head
11	87414	1	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
13	324070A1	1	KNIFE SECTION, RH end
14	1316030C2	1	KNIFE SECTION, 3″, plain half
15	1979166C1	16	SCREW, #12-24 x 1 1/8″
18	321849A1	1	KIT, reinforcing strap for 3″ knives, Includes 17, 24, 25
18	321849A2	1	KIT, reinforcing strap for 3″ knives, Includes 17, 24, 25
22	280355	1	BOLT, Hex, 5/8″-11 x 2 1/4″, G8
23	396-21066	1	WASHER, 21/32″ x 1 5/16″ x .150″, HDN
24	321848A1	50	STRAP, knife reinforcing, 3″ knives
25	87423458	100	BOLT, #12-24 NC x .70″ knurled neck
26	88546	1	BOLT, Hex, 3/8″-16 x 2 1/4″, G5, , For bolting extra knife to header
27	80702	1	WASHER, 3/8″, , For bolting extra knife to header
28	247780	1	NUT, Flg, USR, 3/8″-16, , For bolting extra knife to header
1	451824A1	1	KNIFE ASSY, 3″ fine, 15.0 foot, Includes 2 – 17
1	451824A2	1	KNIFE ASSY, 3″ fine, 15.0 foot, Includes 2 – 17
1	451825A1	1	KNIFE ASSY, 3″ fine, 17.5 foot, Includes 2 – 17
1	451825A2	1	KNIFE ASSY, 3″ fine 17.5 foot, Includes 2 – 17
1	451826A1	1	KNIFE ASSY, 3″ fine, 20.0 foot, Includes 2 – 17
1	451826A2	1	KNIFE ASSY, 3″ fine 20.0 foot, Includes 2 – 17
1	451827A1	1	KNIFE ASSY, 3″ fine, 22.5 foot, Includes 2 – 17
1	451827A2	1	KNIFE ASSY, 3″ fine, 22.5 foot, Includes 2 – 17
1	451828A1	1	KNIFE ASSY, 3″ fine, 25.0 foot, Includes 2 – 17
1	451828A2	1	KNIFE ASSY, 3″ fine, 25.0 foot, Includes 2 – 17
1	451828A3	1	KNIFE ASSY, 3″ fine 25.0 foot, Includes 2 – 17
1	451829A1	1	KNIFE ASSY, 3″ fine, 30.0 foot, Includes 2 – 17
1	451829A2	1	KNIFE ASSY, 3″ fine, 30.0 foot, Includes 2 – 17
1	451829A3	1	KNIFE ASSY, 3″ fine 30.0 foot, Includes 2 – 17
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
5	86637930	1	NUT, SLOTTED, 5/8″-18, G5
7	80708	1	PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
10	1313797C1	1	BLOCK, knife head
10	1313797C2	1	BLOCK, knife head
11	87414	1	NIPPLE, LUBE, 1/4″-28 x .56″ lg, Drive
13	324070A1	1	KNIFE SECTION, RH end
14	1316030C2	1	KNIFE SECTION, 3″, plain half
15	1979166C1	16	SCREW, #12-24 x 1 1/8″
18	321849A1	1	KIT, reinforcing strap for 3″ knives, Includes 17, 24, 25
18	321849A2	1	KIT, reinforcing strap for 3″ knives, Includes 17, 24, 25
22	280355	1	BOLT, Hex, 5/8″-11 x 2 1/4″, G8
23	396-21066	1	WASHER, 21/32″ x 1 5/16″ x .150″, HDN
24	321848A1	50	STRAP, knife reinforcing, 3″ knives
25	87423458	100	BOLT, #12-24 NC x .70″ knurled neck
26	88546	1	BOLT, Hex, 3/8″-16 x 2 1/4″, G5, , For bolting extra knife to header
27	80702	1	WASHER, 3/8″, , For bolting extra knife to header
28	247780	1	NUT, Flg, USR, 3/8″-16, , For bolting extra knife to header
1	125959A1	1	PULLEY, drive, 500 RPM, 267 mm OD
1	125962A1	1	PULLEY, drive, 600 RPM, 12 17/32″ od, Use with 3 inch knife only
1	126012A1	1	PULLEY, drive, 460 rpm, 245 mm OD, Use with 1.5 inch knife only
2	133587A1	4	SCREW, hex flange, self-locking, special, 3/8 NC x 3/4″
3	125966A1	1	HUB, auger and knife drive
4	9706716	2	BOLT, Hex, 1/2″-13 x 2″, G5
5	280431	2	NUT, 1/2″-13, G5
6	131445A1	1	SUPPORT, idler pulley, BSN JJC0308544
7	9706726	4	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
8	247780	4	NUT, Flg, USR, 3/8″-16
9	132230A2	1	EYEBOLT, 1/2 x 10 3/8″
10	132231A1	1	SPACER, tightener belt
11	1338456C1	1	PULLEY, idler, 6″ OD
12	87339	1	BOLT, Hex, 1/2″-13 x 3″, G5
13	232-5318	1	NUT, LOCK, Flg, 1/2″-13
15	86508732	4	BOLT, Hex, 5/8″-11 x 2″, G8
16	426-1056	1	BOLT, Hex, 5/8″-11 x 3 1/2″, G8
17	232-53110	5	NUT, LOCK, Flg, 5/8″-11
18	126316A1	1	PLATE, LARGE, knife box support
19	414077C1	2	BOLT, hex flange, special, 5/8 NC x 1 3/4″
20	414089C1	2	NUT, LOCK, Flg, 5/8″-18
21	247426A1	1	BELT, knife drive 97.9″ O.C. 500 rpm (Optional), Use with 125959A1, 126012A1
21	319904A1	1	BELT, knife drive, 600 rpm, Use with 125962A1
22	280431	2	NUT, 1/2″-13, G5
23	87364	1	WASHER, 1/2″, SAE
1	133157A3	1	WOBBLE BOX, knife drive, Includes 2 – 35, Rework of Left Hand Endsheet NOT Required
2	182581A1	1	SHAFT, wobble
3	130820A2	1	HOUSING, knife box, No Longer Available, Order 398816A1
4	140436A1	1	BEARING, NEEDLE, wobble shaft inner, Used With 130820A2 Housing
5	544667R91	1	SEAL, OIL, Used With 130820A2 Housing
6	217-407	1	PLUG, Hex Hd, 3/8″-18
7	219-436	1	BREATHER, 3/8″-18 NPT, Short, w/washer
8	62520C2	1	TRUNNION
9	287902	2	BEARING, CONE, LM104949
10	287066	2	BEARING, CUP, LM104911
11	133466A1	1	NUT, bearing lock, special
12	130822A2	1	YOKE, trunnion, wobble shaft, Includes 13, 14
13	182580A1	1	YOKE, trunnion, wobble shaft
14	A12652	2	BEARING, NEEDLE
15	394613A2	2	STUD, trunnion knife drive box
16	128962A1	1	SUPPORT, wobble box, Includes 17, 18, 19
17	101295C1	1	SEAL, oil
18	205369R91	1	BEARING, NEEDLE, B-2610
19	166957R91	1	BEARING, NEEDLE, B-2620
20	86977781	1	O-RING, -231, 70 Duro, 2.609″ ID x .139″ Thk
21	136322C1	4	BOLT, hex dry lock, special, 5/8 NC x 2 1/4″, G8
22	86729275	4	WASHER, LOCK, 5/8″
23	62526C1	1	COVER
24	F60368	1	BEARING, NEEDLE, auger
25	62527C1	1	SEAL, oil
26	117045C1	8	BOLT, SPECIAL, 3/8-16 x 1″ G5 Dry-Loc
28	116955C1	1	SEAL, FELT, 1 5/8″ x 3″ x 9/16″
29	126314A2	1	ARM, knife crank with counterweight
30	116954C1	1	WASHER, flat, special, 5/32″ x 2 13/32″ x 5/16″
31	88692	1	BOLT, Hex, 3/4″-10 x 1 1/2″, G5
32	138775A1	1	PULLEY, driven, knife
34	414089C1	1	NUT, LOCK, Flg, 5/8″-18
35	50057K	1	PLUG, separator housing
36	130821A1	1	COVER, wobble box, No Longer Available, Replaced With 130821A2 Below, Includes 23, 24, 25
37	130821A2	1	COVER, wobble box, Includes 23A, 24A, 25A
1	398290A1	1	WOBBLE BOX, knife drive, Rework of Left Hand Endsheet MAY Be Required on BSN JJC 0305090
1	398290A2	1	WOBBLE BOX, knife drive, Includes 2 – 35
2	394674A1	1	SHAFT, wobble
3	398816A1	1	HOUSING, wobble box, Includes 4, 5
4	394681A1	1	BEARING, NEEDLE, 50 mm #75960
6	217-407	1	PLUG, Hex Hd, 3/8″-18
7	219-436	1	BREATHER, 3/8″-18 NPT, Short, w/washer
8	394679A1	1	TRUNNION, wobble box
8	394679A2	1	TRUNNION, knife drive box
9	287902	2	BEARING, CONE, LM104949
10	287066	2	BEARING, CUP, LM104911
11	133466A1	1	NUT, bearing lock, special
12	130822A3	1	YOKE, wobble box, Includes 13, 14
13	394672A1	1	YOKE, knife box
14	709063	2	BUSHING, bronze 1.13″ OD 1.0″ ID
15	394613A2	2	STUD, trunnion knife drive box
16	128962A1	1	SUPPORT, wobble box, Includes 17, 18, 19
17	101295C1	1	SEAL, oil
18	205369R91	1	BEARING, NEEDLE, B-2610
19	166957R91	1	BEARING, NEEDLE, B-2620
20	86977781	1	O-RING, -231, 70 Duro, 2.609″ ID x .139″ Thk
21	136322C1	4	BOLT, hex dry lock, special, 5/8 NC x 2 1/4″, G8
22	86729275	4	WASHER, LOCK, 5/8″
23	394678A1	1	COVER, knife drive box
24	394680A1	1	BEARING, NEEDLE, 60 mm #75959
25	62527C1	1	SEAL, oil
26	117045C1	8	BOLT, SPECIAL, 3/8-16 x 1″ G5 Dry-Loc
28	116955C1	1	SEAL, FELT, 1 5/8″ x 3″ x 9/16″
29	126314A2	1	ARM, knife crank with counterweight
30	116954C1	1	WASHER, flat, special, 5/32″ x 2 13/32″ x 5/16″
31	88692	1	BOLT, Hex, 3/4″-10 x 1 1/2″, G5
32	138775A1	1	PULLEY, driven, knife
34	414089C1	1	NUT, LOCK, Flg, 5/8″-18
35	50057K	1	PLUG, separator housing
36	130821A2	1	COVER, wobble box, Includes 23, 24, 25
1	1316510C2	1	SUPPORT, upper shield
2	135270	4	BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
3	145458	4	NUT, Flg, USR, 5/16″-18
4	1326758C1	1	SUPPORT, shield, upper front
5	129719A3	1	SHIELD, lower tray, BSN JJC0308544
13	1316691C4	1	SHIELD, LH drive
14	1326386C2	1	SUPPORT, shield, lower rear, LH, BSN JJC0308544
15	477-73812	2	SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″
16	247780	2	NUT, Flg, USR, 3/8″-16
17	188103C2	1	BRACKET, Hook Anchor, BSN JJC0308544
18	494307C1	1	LATCH, hook
19	439-1424	1	PIN, HEADED, 1/4″ x 1 1/2″, G2
20	80755	1	PIN, SPLIT (COTTER), 1/8″ x 1″
21	L105124	1	HOOK, LATCH, , BSN JJC0308544
22	88612	2	WASHER, #10
23	70-1108	2	SCREW, Slotted Pan Hd, #10-24 x 1/2″
23	470-11012	2	SCREW, Slotted Pan Hd, #10-24 x 3/4″
24	523310	2	NUT, flange, #10-24
25	1326408C2	2	FASTENER, stud, shield
25	252117A1	1	FASTENER, shield, Australia Only
26	1326407C1	4	RETAINER, shield stud
28	125450A1	1	SUPPORT, knife box
32	477-73812	2	SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″
33	247780	5	NUT, Flg, USR, 3/8″-16
34	126396A1	1	CABLE, shield anchor
35	30944	1	BOLT, Hex Flg, 1/2″-13 x 1″, Serr
36	86512371	1	NUT, Flg, USR, 1/2″-13
37	88707	2	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd
38	86512371	2	NUT, Flg, USR, 1/2″-13
39	291789A2	1	SHIELD, knife drive, lower rear, BSN JJC0308544
40	9706726	1	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
41	523292	2	BOLT, Hex Flg, 1/4″-20 x 3/4″, Serr
42	255926A3	1	SHIELD, knife drive belt, BSN JJC0308544
44	80679	2	WASHER, LOCK, 1/2″
46	9627879	1	BOLT, Hex, 1/2″-13 x 3/4″, G5, Full Thd
47	523282	2	NUT, Flg, USR, 1/4″-20
1	156816C91	2	BEARING, BALL
2	180955C1	4	FLANGE, bearing, BSN JJC0308544
3	80280503	6	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
5	247780	6	NUT, Flg, USR, 3/8″-16
6	1320892C1	1	SUPPORT, jackshaft 15.0 foot
7	183-123	2	SCREW, thumb with shoulder, 5/16 NC x 3/4 inch
8	488837C1	2	NUT, 5/16″ speed
9	1326597C1	1	SHIELD, clutch 15.0 and 16.5 foot
10	9706726	5	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
10	86512174	1	BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr
11	247780	6	NUT, Flg, USR, 3/8″-16
12	138654A1	1	SUPPORT, knife drive, BSN JJC0308544
14	125969A2	1	JACKSHAFT, 15.0 and 16.5 foot
15	225265R1	1	CLAMP, auger bed gear, BSN JJC0308544
16	87972	1	BOLT, Hex, 1/2″-13 x 2 1/2″, G5
17	9636698	1	NUT, LOCK, 1/2″-13, GB
18	1313569C92	1	SHAFT, DRIVE, auger (With decals), See Figure 09B-15, BSN JJC0304999
19	138005A1	1	HANGER, drive line
20	280431	2	NUT, 1/2″-13, G5
21	231-4118	2	NUT, LOCK, 1/2″-13, GB
1	156816C91	2	BEARING, BALL
2	180955C1	4	FLANGE, bearing, BSN JJC0308544
3	80280503	3	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
4	86508749	3	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/4″, G5, Full Thd
5	247780	6	NUT, Flg, USR, 3/8″-16
6	138654A1	1	SUPPORT, knife drive, BSN JJC0308544
7	1307339C2	1	SUPPORT, jackshaft, BSN JJC0308544
8	145913	2	BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
9	145458	2	NUT, Flg, USR, 5/16″-18
10	125992A1	1	SUPPORT, jackshaft, BSN JJC0308544
11	282-1448	1	SCREW, SELF TAP, Hex Wash Hd, #8 x 1/2″
12	280499	1	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd
13	86512371	1	NUT, Flg, USR, 1/2″-13
14	125982A1	1	SHIELD, jackshaft 17.5 foot
14	125983A1	1	SHIELD, jackshaft 20.0 foot
15	125970A2	1	JACKSHAFT, 17.5 foot
15	125971A2	1	JACKSHAFT, 20.0 foot
16	225265R1	1	CLAMP, auger bed gear, BSN JJC0308544
17	87972	1	BOLT, Hex, 1/2″-13 x 2 1/2″, G5
18	9636698	1	NUT, LOCK, 1/2″-13, GB
19	9706726	3	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
20	247780	6	NUT, Flg, USR, 3/8″-16
21	1313569C92	1	SHAFT, DRIVE, auger (With decals), See Figure 09B-15, BSN JJC0304999
22	138005A1	1	HANGER, drive line
23	280431	2	NUT, 1/2″-13, G5
24	231-4118	2	NUT, LOCK, 1/2″-13, GB
1	156816C91	2	BEARING, BALL
2	180955C1	4	FLANGE, bearing, BSN JJC0308544
3	80280503	6	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
4	138654A1	1	SUPPORT, knife drive, BSN JJC0308544
5	247780	6	NUT, Flg, USR, 3/8″-16
6	9706726	3	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
7	247780	4	NUT, Flg, USR, 3/8″-16
8	125992A1	1	SUPPORT, jackshaft, BSN JJC0308544
9	145913	2	BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
10	145458	2	NUT, Flg, USR, 5/16″-18
11	282-1448	1	SCREW, SELF TAP, Hex Wash Hd, #8 x 1/2″
12	125989A1	1	SHIELD, jackshaft 30.0 foot
12	178164A1	1	TUBE, jackshaft shield, 25.0 foot LH
13	125972A2	1	JACKSHAFT, 22.5 foot
13	125973A2	1	JACKSHAFT, 25.0 foot
14	225265R1	1	CLAMP, auger bed gear, BSN JJC0308544
15	87972	1	BOLT, Hex, 1/2″-13 x 2 1/2″, G5
16	9636698	1	NUT, LOCK, 1/2″-13, GB
17	1313570C92	1	SHAFT, DRIVE, auger (With decals), See Figure 09B-17, BSN JJC0304999
18	138005A1	1	HANGER, drive line
19	280431	2	NUT, 1/2″-13, G5
20	231-4118	2	NUT, LOCK, 1/2″-13, GB
1	156816C91	3	BEARING, BALL
2	180955C1	6	FLANGE, bearing, BSN JJC0308544
3	80280503	6	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
4	86508749	3	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/4″, G5, Full Thd
5	247780	9	NUT, Flg, USR, 3/8″-16
6	138654A1	1	SUPPORT, knife drive, BSN JJC0308544
7	1307339C2	1	SUPPORT, jackshaft, BSN JJC0308544
8	145913	5	BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
9	145458	5	NUT, Flg, USR, 5/16″-18
10	9706726	3	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
11	247780	6	NUT, Flg, USR, 3/8″-16
12	280499	1	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd
13	86512371	1	NUT, Flg, USR, 1/2″-13
14	125992A1	3	SUPPORT, jackshaft, BSN JJC0308544
15	282-1448	2	SCREW, SELF TAP, Hex Wash Hd, #8 x 1/2″
16	125985A1	1	SHIELD, jackshaft 25 and 30 foot
17	125974A2	1	JACKSHAFT, 30.0 foot
18	225265R1	1	CLAMP, auger bed gear, BSN JJC0308544
20	9636698	1	NUT, LOCK, 1/2″-13, GB
20	87972	1	BOLT, Hex, 1/2″-13 x 2 1/2″, G5
21	125988A1	1	SHIELD, jackshaft 20.0 foot
22	1313570C92	1	SHAFT, DRIVE, auger (With decals), See Figure 09B-17, BSN JJC0304999
23	138005A1	1	HANGER, drive line
24	280431	2	NUT, 1/2″-13, G5
25	231-4118	2	NUT, LOCK, 1/2″-13, GB
1	1313569C92	1	SHAFT, DRIVE, auger (With decals), Includes 2 – 32
4	278643	4	RING, SNAP, M24, Int
5	933756R1	2	NIPPLE, LUBE, M6 x 1
9	1326528C1	1	DECAL, Danger, shield missing, do not operate
12	838-5845	1	PIN, LOCK, M8 x 45, Slotted
14	278643	4	RING, SNAP, M24, Int
15	933756R1	2	NIPPLE, LUBE, M6 x 1
19	1326658C92	1	SHAFT, DRIVE, female, Includes 2 – 9
20	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 3 – 5
21	1311950C1	1	KIT, push pin, yoke, Includes 7, 8
22	1326623C92	1	SHAFT, DRIVE, male, Includes 10 – 18
23	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 13 – 15
24	1311950C1	1	KIT, push pin, yoke, Includes 17, 18
26	1326627C92	1	SHIELD, INNER, outer female, Includes 27
28	1326630C92	1	SHIELD, OUTER, inner male, Includes 29
30	1326625C91	2	SHIELD, outer yoke, Includes 31
32	1326632C1	2	CHAIN, safety
1	1313569C94	1	SHAFT, DRIVE, PTO knife, Includes 2 – 39
2	86984228	1	SHAFT, DRIVE, inboard half with shield, female, Includes 3, 14
3	86984229	1	SHAFT, female half, Includes 4 – 13
4	86984230	1	SHAFT, female
5	1545200C1	1	YOKE, Female Tube
6	838-5855	1	PIN, LOCK, M8 x 55, Slotted
7	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 8 – 10
9	800-21240	4	RING, SNAP, M240, Int
10	321204	2	NIPPLE, LUBE, M6 x 1, 16mm lg
11	368285A2	1	COLLAR, yoke, inboard shaft with coupler, Includes 12
12	321204	1	NIPPLE, LUBE, M6 x 1, 16mm lg
13	1326528C1	1	DECAL, Danger, shield missing, do not operate
14	86984231	1	SHIELD, INNER, female half shaft, Includes 15 – 19
16	433495A1	1	SHIELD, PTO driveline quick attach coupler
17	1544660C1	1	BEARING, shield support
18	80672C1	1	DECAL, danger, rotating driveline
19	433531A1	1	DECAL, PTO driveline lubrication
19	433531A2	1	DECAL, PTO driveline lubrication
20	86984232	1	SHAFT, outboard half with shield, male, Includes 21, 33
21	1326623C93	1	SHAFT, DRIVE, male, Includes 22 – 30
22	86984233	1	SHAFT, male
23	1545199C1	1	YOKE, inner shaft
24	838-5845	1	PIN, LOCK, M8 x 45, Slotted
25	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 26 – 28
27	800-21240	4	RING, SNAP, M240, Int
28	321204	2	NIPPLE, LUBE, M6 x 1, 16mm lg
29	1325022C1	1	YOKE, drive shaft, Includes 30
30	1311950C1	1	KIT, push pin, yoke, Includes 31, 32
33	1326630C92	1	SHIELD, OUTER, inner male, Includes 34 – 38
35	86985325	1	SHIELD, INNER, PTO driveline cone with collar
36	1544650C1	1	BEARING, Shield Support
37	1326625C91	1	SHIELD, outer yoke, Includes 38
39	1326632C1	2	CHAIN, safety
1	1313570C92	1	SHAFT, DRIVE, auger (With decals), Includes 2 – 32, BSN JJC0304999
4	838-5855	1	PIN, LOCK, M8 x 55, Slotted
6	278643	4	RING, SNAP, M24, Int
7	933756R1	2	NIPPLE, LUBE, M6 x 1
11	1326528C1	1	DECAL, Danger, shield missing, do not operate
14	838-5845	1	PIN, LOCK, M8 x 45, Slotted
16	278643	4	RING, SNAP, M24, Int
17	933756R1	2	NIPPLE, LUBE, M6 x 1
26	1326628C91	1	SHIELD, OUTER, outer female, Includes 27
28	1326631C92	1	SHIELD, OUTER, , Includes 29
30	1326625C91	2	SHIELD, outer yoke, Includes 31
32	1326632C1	2	CHAIN, safety
33	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 5 – 7
34	1311950C1	1	KIT, push pin, yoke, Includes 9, 10
35	1326624C91	1	SHAFT, DRIVE, male, Includes 12 – 20
36	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 15 – 17
37	1311950C1	1	KIT, push pin, yoke, Includes 19, 20
38	1326659C91	1	SHAFT, DRIVE, female, Includes 2 – 11
1	1313570C94	1	SHAFT, DRIVE, PTO, knife, Includes 2 – 39, BTW JJC0305000 & JJC0308544
2	368266A1	1	SHAFT, female half inboard end with shield, Includes 3, 14
3	86984910	1	SHAFT, female half, Includes 4 – 13
4	86985320	1	TUBE, female, telescoping, Includes 13
5	1545200C1	1	YOKE, Female Tube
6	838-5855	1	PIN, LOCK, M8 x 55, Slotted
7	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 8 – 10
9	800-21240	1	RING, SNAP, M240, Int
10	321204	1	NIPPLE, LUBE, M6 x 1, 16mm lg
11	368285A2	1	COLLAR, yoke, inboard shaft with coupler, Includes 12
12	321204	1	NIPPLE, LUBE, M6 x 1, 16mm lg
13	1326528C1	1	DECAL, Danger, shield missing, do not operate
14	86985803	1	SHIELD, OUTER, female half shaft, kit, Includes 15 – 19
16	433495A1	1	SHIELD, PTO driveline quick attach coupler
17	1544660C1	1	BEARING, shield support
18	80672C1	1	DECAL, danger, rotating driveline
19	433531A1	1	DECAL, PTO driveline lubrication
19	433531A2	1	DECAL, PTO driveline lubrication
20	368283A1	1	SHAFT, male half outboard end with shielding, Includes 21, 33
21	1326624C91	1	SHAFT, DRIVE, male, Includes 22 – 30
22	86985321	1	TUBE, male, telescoping
23	1545199C1	1	YOKE, inner shaft
24	838-5845	1	PIN, LOCK, M8 x 45, Slotted
25	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 26 – 28
27	800-21240	4	RING, SNAP, M240, Int
28	321204	2	NIPPLE, LUBE, M6 x 1, 16mm lg
29	1325022C1	1	YOKE, drive shaft, Includes 30
30	1311950C1	1	KIT, push pin, yoke, Includes 31, 32
35	86985325	1	SHIELD, INNER, PTO driveline cone with collar
36	1544650C1	1	BEARING, Shield Support
37	1326625C91	1	SHIELD, outer yoke
39	1326632C1	2	CHAIN, safety
1	371605A1	1	KNIFE ASSY, 15.0 foot modular, Not Shown, Includes 2 – 22
2	371639A1	1	KNIFE ASSY, segment, Not Shown, Includes 3 – 10
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	826720C3	33	KNIFE SECTION, 3″ fine overserrated
10	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
11	371628A1	1	KNIFE ASSY, 15.0 foot RH end segment, Includes 12 -16, Not Shown
13	826720C3	25	KNIFE SECTION, 3″ fine overserrated
14	700708646	51	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
15	1954816C1	51	NUT, LOCK, hex lock, No. 12-24
16	324070A1	1	KNIFE SECTION, RH end
17	371658A1	1	KIT, modular knife splice, Not Shown, Includes 18 – 22
18	371681A1	1	STRAP, modular knife top splice
19	371668A1	1	STRAP, modular knife bottom splice
20	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
21	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371606A1	1	KNIFE ASSY, 17.5 foot modular, Includes 2 – 27
1	371639A1	1	KNIFE ASSY, segment, Includes 3 – 10
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	826720C3	33	KNIFE SECTION, 3″ fine overserrated
10	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
11	371625A1	1	KNIFE ASSY, segment, center, Includes 12 -15
13	826720C3	34	KNIFE SECTION, 3″ fine overserrated
14	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
15	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
16	371629A1	1	KNIFE ASSY, 17.5 foot RH end segment, Includes 18 – 21
18	826720C3	1	KNIFE SECTION, 3″ fine overserrated
19	324070A1	1	KNIFE SECTION, RH end
20	700708646	3	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
21	1954816C1	3	NUT, LOCK, hex lock, No. 12-24
22	371658A1	2	KIT, modular knife splice, Includes 23 – 27
23	371668A1	1	STRAP, modular knife bottom splice
24	371681A1	1	STRAP, modular knife top splice
25	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
26	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371607A1	1	KNIFE ASSY, 20.0 foot modular, Includes 2 – 27
1	371639A1	1	KNIFE ASSY, segment, Includes 2 – 9
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	826720C3	33	KNIFE SECTION, 3″ fine overserrated
10	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
11	371625A1	1	KNIFE ASSY, segment, center, Includes 12 -15
13	826720C3	34	KNIFE SECTION, 3″ fine overserrated
14	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
15	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
16	371630A1	1	KNIFE ASSY, 20.0 foot RH end segment, Includes 17 – 21
18	826720C3	11	KNIFE SECTION, 3″ fine overserrated
19	324070A1	1	KNIFE SECTION, RH end
20	700708646	23	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
21	1954816C1	23	NUT, LOCK, hex lock, No. 12-24
22	371658A1	2	KIT, modular knife splice, Includes 23 – 27
23	371681A1	1	STRAP, modular knife top splice
24	371668A1	1	STRAP, modular knife bottom splice
25	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
26	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371608A1	1	KNIFE ASSY, 22.5 foot modular, Includes 2 – 27
1	371639A1	1	KNIFE ASSY, segment, Includes 3 – 10
3	1316161C94	1	HEAD, KNIFE, , Includes 3
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	826720C3	33	KNIFE SECTION, 3″ fine overserrated
10	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
11	371625A1	1	KNIFE ASSY, segment, center, Includes 12 -15
13	826720C3	34	KNIFE SECTION, 3″ fine overserrated
14	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
15	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
16	371631A1	1	KNIFE ASSY, 22.5 foot RH end segment, Includes 17 – 21
18	826720C3	21	KNIFE SECTION, 3″ fine overserrated
19	324070A1	1	KNIFE SECTION, RH end
20	700708646	43	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
21	1954816C1	43	NUT, LOCK, hex lock, No. 12-24
22	371658A1	2	KIT, modular knife splice, Includes 23 – 27
23	371681A1	1	STRAP, modular knife top splice
24	371668A1	1	STRAP, modular knife bottom splice
25	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
26	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371609A1	1	KNIFE ASSY, 25.0 foot modular, Includes 2 – 29
0	451834A2	1	KNIFE ASSY, modular, 25.0 foot, Includes 2 – 29
1	371623A1	1	KNIFE ASSY, segment, Includes 3 – 11
1	371623A2	1	KNIFE ASSY, segment, Includes 3 – 11
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	826720C3	33	KNIFE SECTION, 3″ fine overserrated
10	321848A1	25	STRAP, knife reinforcing, 3″ knives
11	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
12	371626A1	1	KNIFE ASSY, segment, center, Includes 13 -17
14	826720C3	34	KNIFE SECTION, 3″ fine overserrated
15	321848A1	21	STRAP, knife reinforcing, 3″ knives
16	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
17	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
18	371632A1	1	KNIFE ASSY, 25.0 foot RH end segment, Includes 19 – 23
20	826720C3	31	KNIFE SECTION, 3″ fine overserrated
21	324070A1	1	KNIFE SECTION, RH end
22	700708646	63	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
23	1954816C1	63	NUT, LOCK, hex lock, No. 12-24
24	371658A1	2	KIT, modular knife splice, Includes 25 – 29
25	371681A1	1	STRAP, modular knife top splice
26	371668A1	1	STRAP, modular knife bottom splice
27	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
28	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371610A1	1	KNIFE ASSY, 30.0 foot modular, Includes 2 – 34
1	371623A1	1	KNIFE ASSY, segment, Includes 3 – 11
1	371623A2	1	KNIFE ASSY, segment, Includes 3 – 11
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	826720C3	33	KNIFE SECTION, 3″ fine overserrated
10	321848A1	25	STRAP, knife reinforcing, 3″ knives
11	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
12	371626A1	1	KNIFE ASSY, segment, center, Includes 13 -17
14	826720C3	34	KNIFE SECTION, 3″ fine overserrated
15	321848A1	21	STRAP, knife reinforcing, 3″ knives
16	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
17	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
18	371625A1	1	KNIFE ASSY, segment, center, Includes 19 – 22
20	826720C3	31	KNIFE SECTION, 3″ fine overserrated
21	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
22	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
23	371636A1	1	KNIFE ASSY, 30.0 foot RH end segment, Includes 24 – 28
25	826720C3	17	KNIFE SECTION, 3″ fine overserrated
26	324070A1	1	KNIFE SECTION, RH end
27	700708646	35	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
28	1954816C1	35	NUT, LOCK, hex lock, No. 12-24
29	371658A1	3	KIT, modular knife splice, Includes 30 – 34
30	371681A1	1	STRAP, modular knife top splice
31	371668A1	1	STRAP, modular knife bottom splice
32	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
33	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
1	371613A1	1	KNIFE ASSY, 15.0 foot modular, Includes 2 – 22, Not Shown
1	371613A2	1	KNIFE ASSY, 15.0 foot modular, Includes 2 – 22, Not Shown
2	371638A1	1	HEAD, segment, Not Shown, Includes 3 – 10
2	371638A2	1	KNIFE ASSY, head segment, Includes 3 – 10, Not Shown
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	112074A1	33	KNIFE SECTION, overserrated, 3″
10	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
11	371645A1	1	KNIFE ASSY, 15.0 foot RH end segment, Includes 12 -16, Not Shown
13	112074A1	25	KNIFE SECTION, overserrated, 3″
14	700708646	51	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
15	1954816C1	51	NUT, LOCK, hex lock, No. 12-24
16	148200C1	1	KNIFE SECTION, overserrated, double right-hand
17	371658A1	1	KIT, modular knife splice, Not Shown, Includes 18 – 22
18	371681A1	1	STRAP, modular knife top splice
19	371668A1	1	STRAP, modular knife bottom splice
20	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
21	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371618A1	1	KNIFE ASSY, 17.5 foot modular, Includes 2 – 27
0	371618A2	1	KNIFE ASSY, 17.5 foot modular, Includes 2 – 27
1	371638A1	1	HEAD, segment, Includes 3 – 10
1	371638A2	1	KNIFE ASSY, head segment, Includes 3 – 10
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	112074A1	33	KNIFE SECTION, overserrated, 3″
10	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
11	371643A1	1	KNIFE ASSY, segment, center, Includes 12 -15
13	112074A1	34	KNIFE SECTION, overserrated, 3″
14	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
15	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
16	371646A1	1	KNIFE ASSY, 17.5 foot RH end segment, Includes 17 – 21
18	112074A1	1	KNIFE SECTION, overserrated, 3″
19	148200C1	1	KNIFE SECTION, overserrated, double right-hand
20	700708646	3	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
21	1954816C1	3	NUT, LOCK, hex lock, No. 12-24
22	371658A1	2	KIT, modular knife splice, Includes 23 – 27
23	371681A1	1	STRAP, modular knife top splice
24	371668A1	1	STRAP, modular knife bottom splice
25	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
26	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371619A1	1	KNIFE ASSY, 20.0 foot modular, Includes 2 – 27
0	371619A2	1	KNIFE ASSY, 20.0 foot modular, Includes 2 – 27
1	371638A1	1	HEAD, segment, Includes 3 – 10
1	371638A2	1	KNIFE ASSY, head segment, Includes 3 – 10
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	112074A1	33	KNIFE SECTION, overserrated, 3″
10	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
11	371643A1	1	KNIFE ASSY, segment, center, Includes 12 -15
13	112074A1	34	KNIFE SECTION, overserrated, 3″
14	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
15	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
16	371647A1	1	KNIFE ASSY, 20.0 foot RH end segment, Includes 17 – 21
18	112074A1	11	KNIFE SECTION, overserrated, 3″
19	148200C1	1	KNIFE SECTION, overserrated, double right-hand
20	700708646	23	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
21	1954816C1	23	NUT, LOCK, hex lock, No. 12-24
22	371658A1	2	KIT, modular knife splice, Includes 23 – 27
23	371681A1	1	STRAP, modular knife top splice
24	371668A1	1	STRAP, modular knife bottom splice
25	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
26	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371620A1	1	KNIFE ASSY, 22.5 foot modular, Includes 2 – 27
0	371620A2	1	KNIFE ASSY, 22.5 foot modular, Includes 2 – 27
1	371638A1	1	HEAD, segment, Includes 3 – 10
1	371638A2	1	KNIFE ASSY, head segment, Includes 3 – 10
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	112074A1	33	KNIFE SECTION, overserrated, 3″
10	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
11	371643A1	1	KNIFE ASSY, segment, center, Includes 12 -15
13	112074A1	34	KNIFE SECTION, overserrated, 3″
14	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
15	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
16	371649A1	1	KNIFE ASSY, 22.5 foot RH end segment, Includes 17 – 21
18	112074A1	21	KNIFE SECTION, overserrated, 3″
19	148200C1	1	KNIFE SECTION, overserrated, double right-hand
20	700708646	43	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
21	1954816C1	43	NUT, LOCK, hex lock, No. 12-24
22	371658A1	2	KIT, modular knife splice, Includes 23 – 27
23	371681A1	1	STRAP, modular knife top splice
24	371668A1	1	STRAP, modular knife bottom splice
25	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
26	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371621A1	1	KNIFE ASSY, 25.0 foot modular, Includes 2 – 29
0	371621A2	1	KNIFE ASSY, 25.0 foot modular, Includes 2 – 29
0	371621A3	1	KNIFE ASSY, 25.0 foot modular, Includes 2 – 29
1	371642A1	1	HEAD, segment, Includes 3 – 10
1	371642A2	1	KNIFE ASSY, segment, Includes 3 – 10
1	371642A3	1	KNIFE ASSY, segment, Includes 3 – 10
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	112074A1	33	KNIFE SECTION, overserrated, 3″
10	321848A1	25	STRAP, knife reinforcing, 3″ knives
11	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
12	371644A1	1	KNIFE ASSY, segment, center, Includes 13 -17
12	371644A2	1	KNIFE ASSY, segment, center, Includes 13 -17
14	112074A1	34	KNIFE SECTION, overserrated, 3″
15	321848A1	21	STRAP, knife reinforcing, 3″ knives
16	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
17	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
18	371650A1	1	KNIFE ASSY, 25.0 foot RH end segment, Includes 19 – 23
20	112074A1	31	KNIFE SECTION, overserrated, 3″
21	148200C1	1	KNIFE SECTION, overserrated, double right-hand
22	700708646	63	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
23	1954816C1	63	NUT, LOCK, hex lock, No. 12-24
24	371658A1	2	KIT, modular knife splice, Includes 25 – 29
25	371681A1	1	STRAP, modular knife top splice
26	371668A1	1	STRAP, modular knife bottom splice
27	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
28	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
0	371622A1	1	KNIFE ASSY, 30.0 foot modular, Includes 2 – 34
0	371622A2	1	KNIFE ASSY, 30.0 foot modular, Includes 2 – 34
0	371622A3	1	KNIFE ASSY, 30.0 foot modular, Includes 2 – 34
1	371642A1	1	HEAD, segment, Includes 3 – 11
1	371642A2	1	KNIFE ASSY, segment, Includes 3 – 11
1	371642A3	1	KNIFE ASSY, segment, Includes 3 – 11
3	1316161C94	1	HEAD, KNIFE, , Includes 4
3	1316161C95	1	HEAD, KNIFE, , Includes 4
4	1345491C2	1	DUST CAP, cover
6	1979166C1	16	SCREW, #12-24 x 1 1/8″
7	1954816C1	66	NUT, LOCK, hex lock, No. 12-24
8	1316030C2	1	KNIFE SECTION, 3″, plain half
9	112074A1	33	KNIFE SECTION, overserrated, 3″
10	321848A1	25	STRAP, knife reinforcing, 3″ knives
11	700708646	50	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
12	371644A1	1	KNIFE ASSY, segment, center, Includes 13 -17
12	371644A2	1	KNIFE ASSY, segment, center, Includes 13 -17
14	112074A1	34	KNIFE SECTION, overserrated, 3″
15	321848A1	21	STRAP, knife reinforcing, 3″ knives
16	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
17	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
18	371643A1	1	KNIFE ASSY, segment, center, Includes 19 – 22
20	112074A1	34	KNIFE SECTION, overserrated, 3″
21	700708646	60	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
22	1954816C1	60	NUT, LOCK, hex lock, No. 12-24
23	371652A1	1	KNIFE ASSY, 30.0 foot RH end segment, Includes 24 – 28
25	112074A1	17	KNIFE SECTION, overserrated, 3″
26	148200C1	1	KNIFE SECTION, overserrated, double right-hand
27	700708646	35	BOLT AND NUT, #12-24 x 5/8″ slot bt hd
28	1954816C1	35	NUT, LOCK, hex lock, No. 12-24
29	371658A1	3	KIT, modular knife splice, Includes 30 – 34
30	371681A1	1	STRAP, modular knife top splice
31	371668A1	1	STRAP, modular knife bottom splice
32	227457A1	10	SCREW, #12-24 x .13/16″ CSK HSKT
33	1954816C1	10	NUT, LOCK, hex lock, No. 12-24
1	106001A2	1	AUGER, 15.0 foot
1	106003A2	1	AUGER, 17.5 foot, BSN JJC0308544
1	106004A2	1	AUGER, 20.0 foot, BSN JJC0308544
1	322193A1	1	AUGER, with flight extension 22.5 foot, BSN JJC0308544
1	322192A1	1	AUGER, with flight extension 25.0 foot, BSN JJC0308544
1	349016A1	1	AUGER, header 5 piece, 25.0 foot, Latin America Only
1	322191A2	1	AUGER, 30.0 foot (3 piece), BSN JJC0308544
1	359655A1	1	AUGER, header, 5 piece, with extension, Latin America Only
2	106024A1	1	SHAFT, drive
3	9670285	12	BOLT, Hex, 3/8″-16 x 1″, G8, Full Thd
4	429-106	12	NUT, 3/8″-16, G8
5	80680	12	WASHER, LOCK, 3/8″
6	86624186	12	WASHER, 13/32″ x 1 1/8″ x .134″
7	1307256C1	1	RETAINER, auger LH
8	52443	2	BEARING, BALL
9	455112R11	2	COLLAR, locking, bearing, with set screw
10	663562R1	4	FLANGE, bearing, Alternate With 1307583C1
10	1307583C1	4	FLANGE, bearing 80 mm 4 bolt, Alternate With 663562R1
12	232-5318	8	NUT, LOCK, Flg, 1/2″-13
14	214366C91	1	BEARING, BALL, double flange mount
15	38260	1	COLLAR, lock 1″ bore 1 1/2″ OD
16	937517R1	2	FLANGE, bearing
17	231-5315	3	NUT, LOCK, Flg, 5/16″-18
18	1307262C1	1	TUBE, finger adjusting (15.0 foot)
18	1307263C1	1	TUBE, finger adjusting (17.5 foot)
18	1307264C1	1	TUBE, finger adjusting (20.0 foot)
18	1307265C1	1	TUBE, finger adjusting (22.5 foot)
19	1307266C1	1	TUBE, finger adjusting (25.0 foot), BSN JJC0308544
19	1307267C1	1	TUBE, finger adjusting (30.0 foot), BSN JJC0308544
20	184505C2	2	COVER, auger drum, BSN JJC0308544
21	281-1478	12	SCREW, SELF TAP, Hex Wash Hd, 1/4″ x 1/2″
22	1316383C1	1	SHAFT, auger finger, See Figure 09C-02
25	477-73812	2	SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″
26	247780	2	NUT, Flg, USR, 3/8″-16
27	86637594	2	WASHER, 13/32″ x 1 1/2″ x .120″
28	353-417	6	PLUG, Dome, 2.000″ hole, Nylon
1	1307259C2	20	GUIDE, finger
4	1320699C1	20	FINGER, retractable, BSN JJC0308544
5	185309A1	20	SPLIT PIN/SAFETY PIN, quick attachable
6	1308425C1	20	HUB, auger finger
7	1316383C1	1	SHAFT, auger finger
8	1326467C1	1	CLAMP, finger shaft
9	280504	3	BOLT, CARRIAGE, Short NK, 1/2″-13 x 2 1/4″, G5
10	231-4118	3	NUT, LOCK, 1/2″-13, GB
12	1320698C1	1	ANGLE, auger finger shaft, BSN JJC0308544
13	87441009	1	PLATE, auger tube
15	38-1822	1	PIN, LOCK, 1/8″ x 1 3/8″, Slotted
16	434295A2	20	FINGER, auger retractable, Not Shown, Includes 14, 15, ASN JJC0306000
1	1308445C2	1	EXTENSION, auger flight LH
2	1308446C2	1	EXTENSION, auger flight, RH
3	30944	2	BOLT, Hex Flg, 1/2″-13 x 1″, Serr
4	280499	4	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd
5	232-5318	6	NUT, LOCK, Flg, 1/2″-13
6	167823C1	2	COVER
7	9707580	4	BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd
8	20356	4	NUT, LOCK, 1/4″-20, GB
1	321820A1	1	EXTENSION, auger flight LH
2	321819A1	1	EXTENSION, auger flight RH
3	30944	2	BOLT, Hex Flg, 1/2″-13 x 1″, Serr
4	280499	4	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd
5	232-5318	6	NUT, LOCK, Flg, 1/2″-13
6	167823C1	2	COVER
7	9707580	4	BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd
8	20356	4	NUT, LOCK, 1/4″-20, GB
1	87585175	1	BRACKET, auger, LH, Includes 2
2	189971C1	1	BUSHING, pivot
3	1968840C1	2	SPACER, 3/4″ OD x 1 1/16″, auger pivot
4	9706716	2	BOLT, Hex, 1/2″-13 x 2″, G5
5	86521610	2	NUT, LOCK, Flg, 1/2″-13
6	87364	4	WASHER, 1/2″, SAE
8	128429A2	1	SUPPORT, bracket, RH auger, Includes 9
9	189971C1	1	BUSHING, pivot
10	86624188	2	WASHER, 17/32″ x 1 1/16″ x .134″
13	128199A1	1	SUPPORT, auger adjusting LH
14	133822A1	1	SUPPORT, auger adjusting, RH
15	280431	8	NUT, 1/2″-13, G5
16	1320723C3	2	SUPPORT, bracket, auger lift
17	87045537	2	SPLIT PIN/SAFETY PIN, .148 x 3 5/16″
18	432-1218	2	PIN, SPLIT (COTTER), 3/16″ x 1 1/8″
19	439-5844	2	PIN, HEADED, 1/2″ x 2 3/4″, G5
20	127870A1	2	EYEBOLT, auger pivot
23	52443	1	BEARING, BALL
24	663562R1	2	FLANGE, bearing, Alternate With 1307583C1
24	1307583C1	2	FLANGE, bearing 80 mm 4 bolt, Alternate With 663562R1
25	280499	4	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd
26	86521610	2	NUT, LOCK, Flg, 1/2″-13
27	1320695C2	1	TUBE, auger finger adjuster
28	1307195C2	1	U-BOLT, 1/2″ NC
29	9636698	2	NUT, LOCK, 1/2″-13, GB
30	30944	2	BOLT, Hex Flg, 1/2″-13 x 1″, Serr
31	183064A1	2	SHIELD, auger lift bracket, BSN JJC0308544
32	87034817	4	SCREW, SELF TAP, Hex Wash Hd, 5/16″ x 3/4″
33	86512371	4	NUT, Flg, USR, 1/2″-13
34	87441010	1	PLATE, auger tube
2	106055A2	1	SPROCKET, Auger Driven 56T (Standard), BSN JJC0308544
2	106056A1	1	SPROCKET, auger drive 50T (Optional)
2	106057A1	1	SPROCKET, auger drive 45T (Optional)
2	106058A1	1	SPROCKET, auger drive 40T (Optional)
3	496-21106	1	WASHER, 1 1/16″ x 2″ x .209″
4	425-1416	2	NUT, Jam, 1″-8, G5
5	125966A1	1	HUB, auger and knife drive
6	9706716	2	BOLT, Hex, 1/2″-13 x 2″, G5
7	280431	2	NUT, 1/2″-13, G5
8	125990A1	1	SPROCKET, auger drive, 17 tooth
9	1319250C1	4	SCREW, hex flange, special, 3/8″ NC x 1″
10	179013A1	1	SPROCKET, idler, 15 tooth, BSN JJC0308544
11	87975	1	BOLT, Hex, 1/2″-13 x 2 1/4″, G5
12	131-943	1	NUT, Flg, 1/2″-13, G5
13	87364	3	WASHER, 1/2″, SAE
14	128261A3	1	BRACKET, idler sprocket
15	87670	1	BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd
16	131-943	1	NUT, Flg, 1/2″-13, G5
17	495-81213	2	WASHER, 1 13/32″ x 2″ x .060″
1	1316566C3	1	SHIELD, end, RH
2	1326230C2	1	HINGE
3	1326408C2	1	FASTENER, stud, shield
3	252117A1	1	FASTENER, shield, Australia Only
4	1326407C1	2	RETAINER, shield stud
5	495-81023	6	WASHER, 17/32″ x 1 1/4″ x .030″
6	477-82508	8	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 1/2″
7	523282	8	NUT, Flg, USR, 1/4″-20
8	87361	4	WASHER, 1/4″, SAE
9	134434A1	1	BRACKET, auger shield, front, BSN JJC0308544
10	9706726	2	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
11	247780	2	NUT, Flg, USR, 3/8″-16
12	249051A1	1	SHIELD, cover, chain, BSN JJC0308544
13	477-73812	2	SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″
14	247780	2	NUT, Flg, USR, 3/8″-16
1	225265R1	1	CLAMP, auger bed gear, BSN JJC0308544
2	87972	1	BOLT, Hex, 1/2″-13 x 2 1/2″, G5
3	231-4118	1	NUT, LOCK, 1/2″-13, GB
4	106044A1	1	SHAFT, DRIVE, auger RH, BSN JJC0304999
8	125975A1	1	JACKSHAFT, 15.0 and 16.5 foot
9	156816C91	2	BEARING, BALL
10	180955C1	4	FLANGE, bearing, BSN JJC0308544
11	80280503	6	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
12	247780	6	NUT, Flg, USR, 3/8″-16
13	106084A3	1	SUPPORT, jackshaft 15.0 and 16.5 foot
16	106087A1	1	SHIELD, cover
17	183-123	2	SCREW, thumb with shoulder, 5/16 NC x 3/4 inch
18	488837C1	2	NUT, 5/16″ speed
19	247089A1	1	SHIELD, auger slip clutch, Not Shown, Includes 20 – 30
20	251170A1	1	SHIELD, auger slip clutch
21	254233A2	2	WASHER, SPECIAL, shoulder
22	247087A1	1	DOOR, auger slip clutch shield, BSN JJC0308544
23	251031A1	1	GUARD, auger slip clutch
24	251046A1	2	STRIP, SEALING, auger slip clutch
25	523282	5	NUT, Flg, USR, 1/4″-20
26	477-82512	5	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″
27	86521550	2	BOLT, Hex Flg, 1/4″-20 x 3/4″, G5, Full Thd
28	259019A1	2	BUMPER, plug
29	276013A1	1	LATCH, shield
29	143347A1	1	LATCH, engine cover, Australia Only
30	9626558	2	NUT, LOCK, Flg, 1/4″-20
31	138005A1	1	HANGER, drive line
32	280431	2	NUT, 1/2″-13, G5
33	231-4118	2	NUT, LOCK, 1/2″-13, GB
1	225265R1	1	CLAMP, auger bed gear, BSN JJC0308544
2	87972	1	BOLT, Hex, 1/2″-13 x 2 1/2″, G5
3	231-4118	1	NUT, LOCK, 1/2″-13, GB
4	106044A1	1	SHAFT, DRIVE, auger RH, See Figure 09C-12, BSN JJC0304999
8	125976A1	1	JACKSHAFT, auger 17.5 foot
8	125977A1	1	JACKSHAFT, auger 20.0 foot
9	156816C91	2	BEARING, BALL
10	180955C1	4	FLANGE, bearing, BSN JJC0308544
11	80280503	3	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
12	86508749	3	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/4″, G5, Full Thd
13	247780	9	NUT, Flg, USR, 3/8″-16
14	128416A2	1	SUPPORT, jackshaft bearing RH, BSN JJC0308544
15	145913	2	BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
15	256873	1	BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr
16	145458	3	NUT, Flg, USR, 5/16″-18
17	280499	1	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd
18	86512371	1	NUT, Flg, USR, 1/2″-13
19	125992A1	2	SUPPORT, jackshaft, BSN JJC0308544
20	251170A1	1	SHIELD, auger slip clutch
21	254233A2	2	WASHER, SPECIAL, shoulder
22	247087A1	1	DOOR, auger slip clutch shield, BSN JJC0308544
23	251031A1	1	GUARD, auger slip clutch
24	251046A1	2	STRIP, SEALING, auger slip clutch
25	523282	5	NUT, Flg, USR, 1/4″-20
26	477-82512	5	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″
26	523292	3	BOLT, Hex Flg, 1/4″-20 x 3/4″, Serr
27	86521550	2	BOLT, Hex Flg, 1/4″-20 x 3/4″, G5, Full Thd
28	259019A1	2	BUMPER, plug
29	276013A1	1	LATCH, shield
29	143347A1	1	LATCH, engine cover, Australia Only
30	9626558	2	NUT, LOCK, Flg, 1/4″-20
31	138005A1	1	HANGER, drive line
32	280431	2	NUT, 1/2″-13, G5
33	231-4118	2	NUT, LOCK, 1/2″-13, GB
36	282-1448	2	SCREW, SELF TAP, Hex Wash Hd, #8 x 1/2″
37	125987A1	1	SHIELD, jackshaft 17.5 foot
37	125988A1	1	SHIELD, jackshaft 20.0 foot
38	247089A1	1	SHIELD, auger slip clutch, Includes 20 – 30, Not Shown
1	225265R1	1	CLAMP, auger bed gear, BSN JJC0308544
2	87972	1	BOLT, Hex, 1/2″-13 x 2 1/2″, G5
3	231-4118	1	NUT, LOCK, 1/2″-13, GB
4	106043A1	1	SHAFT, DRIVE, auger RH, See Figure 09C-13, BSN JJC0304999
8	125978A1	1	JACKSHAFT, auger 22.5 foot
8	125979A1	1	JACKSHAFT, auger 25.0 foot
9	156816C91	2	BEARING, BALL
10	180955C1	4	FLANGE, bearing, BSN JJC0308544
11	80280503	6	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
12	247780	6	NUT, Flg, USR, 3/8″-16
13	125992A1	2	SUPPORT, jackshaft, BSN JJC0308544
14	282-1448	2	SCREW, SELF TAP, Hex Wash Hd, #8 x 1/2″
15	256873	2	BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr
16	145458	3	NUT, Flg, USR, 5/16″-18
17	125984A1	1	SHIELD, jackshaft 22.5 foot
17	125985A1	1	SHIELD, jackshaft 25 and 30 foot
18	247089A1	1	SHIELD, auger slip clutch, Includes 20 – 30, Not Shown
20	251170A1	1	SHIELD, auger slip clutch
21	254233A2	2	WASHER, SPECIAL, shoulder
22	247087A1	1	DOOR, auger slip clutch shield, BSN JJC0308544
23	251031A1	1	GUARD, auger slip clutch
24	251046A1	2	STRIP, SEALING, auger slip clutch
25	523282	5	NUT, Flg, USR, 1/4″-20
26	477-82512	5	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″
27	86521550	7	BOLT, Hex Flg, 1/4″-20 x 3/4″, G5, Full Thd
28	259019A1	2	BUMPER, plug
29	276013A1	1	LATCH, shield
29	143347A1	1	LATCH, engine cover, Australia Only
30	9626558	2	NUT, LOCK, Flg, 1/4″-20
31	138005A1	1	HANGER, drive line
32	280431	2	NUT, 1/2″-13, G5
33	231-4118	2	NUT, LOCK, 1/2″-13, GB
1	225265R1	1	CLAMP, auger bed gear, BSN JJC0308544
2	87972	1	BOLT, Hex, 1/2″-13 x 2 1/2″, G5
3	231-4118	1	NUT, LOCK, 1/2″-13, GB
4	106043A1	1	SHAFT, DRIVE, auger RH, BSN JJC0304999
8	125980A1	1	JACKSHAFT, auger 30.0 foot
9	156816C91	3	BEARING, BALL
10	180955C1	6	FLANGE, bearing, BSN JJC0308544
11	80280503	6	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd
12	86508749	3	BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/4″, G5, Full Thd
13	247780	9	NUT, Flg, USR, 3/8″-16
14	125992A1	4	SUPPORT, jackshaft, BSN JJC0308544
15	282-1448	2	SCREW, SELF TAP, Hex Wash Hd, #8 x 1/2″
16	145913	2	BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
17	145458	2	NUT, Flg, USR, 5/16″-18
18	125989A1	1	SHIELD, jackshaft 30.0 foot
19	128416A2	1	SUPPORT, jackshaft bearing RH, BSN JJC0308544
20	251170A1	1	SHIELD, auger slip clutch
21	254233A2	2	WASHER, SPECIAL, shoulder
22	247087A1	1	DOOR, auger slip clutch shield, BSN JJC0308544
23	251031A1	1	GUARD, auger slip clutch
24	251046A1	2	STRIP, SEALING, auger slip clutch
25	523282	5	NUT, Flg, USR, 1/4″-20
26	477-82512	5	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″
27	86521550	7	BOLT, Hex Flg, 1/4″-20 x 3/4″, G5, Full Thd
28	259019A1	2	BUMPER, plug
29	276013A1	1	LATCH, shield
29	143347A1	1	LATCH, engine cover, Australia Only
30	9626558	2	NUT, LOCK, Flg, 1/4″-20
31	86512371	1	NUT, Flg, USR, 1/2″-13
32	256873	2	BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr
33	145458	2	NUT, Flg, USR, 5/16″-18
34	125985A1	1	SHIELD, jackshaft 25 and 30 foot
35	138005A1	1	HANGER, drive line
36	280431	2	NUT, 1/2″-13, G5
37	231-4118	2	NUT, LOCK, 1/2″-13, GB
38	280499	1	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd
39	247089A1	1	SHIELD, auger slip clutch, Includes 20 – 30, Not Shown
1	106044A1	1	SHAFT, DRIVE, auger RH, Includes 2 – 30
4	278643	4	RING, SNAP, M24, Int
5	933756R1	2	NIPPLE, LUBE, M6 x 1
9	1326528C1	1	DECAL, Danger, shield missing, do not operate
12	838-5845	1	PIN, LOCK, M8 x 45, Slotted
14	278643	4	RING, SNAP, M24, Int
15	933756R1	2	NIPPLE, LUBE, M6 x 1
16	106089A1	1	CLUTCH, drive shaft
25	106104A1	1	SHIELD, OUTER, outer female shaft, Includes 26
27	106106A1	1	SHIELD, INNER, inner male shaft
28	1326625C91	1	SHIELD, outer yoke
30	1326632C1	2	CHAIN, safety
31	106108A1	1	SHAFT, female drive, Includes 2 – 9
32	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 3 – 5
33	106110A1	1	SHAFT, male drive, Includes 10 – 18
34	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 13 – 15
35	1311950C1	1	KIT, push pin, yoke, Includes 17, 18
36	1311950C1	1	KIT, push pin, yoke, Includes 7, 8
1	106044A3	1	SHAFT, DRIVE, PTO auger, Includes 2 – 37
2	86984228	1	SHAFT, DRIVE, inboard half with shield, female, Includes 3, 14
3	86984229	1	SHAFT, female half, Includes 4 – 13
4	86984230	1	SHAFT, female
5	1545200C1	1	YOKE, Female Tube
6	838-5855	1	PIN, LOCK, M8 x 55, Slotted
7	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 8 – 10
9	800-21240	4	RING, SNAP, M240, Int
10	321204	2	NIPPLE, LUBE, M6 x 1, 16mm lg
11	368285A2	1	COLLAR, yoke, inboard shaft with coupler, Includes 12
12	321204	1	NIPPLE, LUBE, M6 x 1, 16mm lg
13	1326528C1	1	DECAL, Danger, shield missing, do not operate
14	86985326	1	SHIELD, female half shaft, kit, Includes 15 – 19
16	433495A1	1	SHIELD, PTO driveline quick attach coupler
17	1544660C1	1	BEARING, shield support
18	80672C1	1	DECAL, danger, rotating driveline
19	433531A1	1	DECAL, PTO driveline lubrication
19	433531A2	1	DECAL, PTO driveline lubrication
20	86984302	1	SHAFT, outboard half with shield, Includes 21, 33
21	106110A2	1	SHAFT, male drive, Includes 22 – 37
22	86984233	1	SHAFT, male
23	1545199C1	1	YOKE, inner shaft
24	838-5845	1	PIN, LOCK, M8 x 45, Slotted
25	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 26 – 28
27	800-21240	4	RING, SNAP, M240, Int
28	321204	2	NIPPLE, LUBE, M6 x 1, 16mm lg
29	106089A2	1	CLUTCH ASSEMBLY, drive shaft, Includes 30, See Figure 09C-15A
30	1311950C1	1	KIT, push pin, yoke, Includes 31, 32
33	106106A2	1	SHIELD, INNER, inner male shaft, Includes 34 – 37
35	86984322	1	SHIELD, male shaft cone with collar
36	1544650C1	1	BEARING, Shield Support
39	1326632C1	2	CHAIN, safety
1	106043A1	1	SHAFT, DRIVE, auger RH, Includes 2 – 30, BSN JJC0304999
4	278643	4	RING, SNAP, M24, Int
5	933756R1	2	NIPPLE, LUBE, M6 x 1
9	1326528C1	1	DECAL, Danger, shield missing, do not operate
12	838-5845	1	PIN, LOCK, M8 x 45, Slotted
14	278643	4	RING, SNAP, M24, Int
15	933756R1	2	NIPPLE, LUBE, M6 x 1
25	106103A1	1	SHIELD, OUTER, outer female shaft, Includes 26
27	106105A1	1	SHIELD, INNER, inner male shaft
28	1326625C91	1	SHIELD, outer yoke, Includes 29
30	1326632C1	2	CHAIN, safety
31	106107A1	1	SHAFT, female drive, Includes 2 – 9
32	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 3 – 5
33	1311950C1	1	KIT, push pin, yoke, Includes 7, 8
34	106109A1	1	SHAFT, male drive, Includes 10 – 18
35	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 13 – 15
36	1311950C1	1	KIT, push pin, yoke, Includes 17, 18
1	106043A3	1	SHAFT, DRIVE, PTO auger, Includes 2 – 39, ASN JJC0305000
2	86984378	1	SHAFT, DRIVE, inboard half, Includes 3, 14
3	86984910	1	SHAFT, female half, Includes 4 – 13
4	86984491	1	SHAFT, female cardan telescoping
5	1545200C1	1	YOKE, Female Tube
6	838-5855	1	PIN, LOCK, M8 x 55, Slotted
7	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 8 – 10
9	800-21240	4	RING, SNAP, M240, Int
10	321204	2	NIPPLE, LUBE, M6 x 1, 16mm lg
11	368285A2	1	COLLAR, yoke, inboard shaft with coupler, Includes 12
12	321204	1	NIPPLE, LUBE, M6 x 1, 16mm lg
13	86984492	1	SHIELD, female half shaft, kit
14	86984492	1	SHIELD, female half shaft, kit, Includes 15 – 19
16	433495A1	1	SHIELD, PTO driveline quick attach coupler
17	1544660C1	1	BEARING, shield support
18	80672C1	1	DECAL, danger, rotating driveline
19	433531A1	1	DECAL, PTO driveline lubrication
19	433531A2	1	DECAL, PTO driveline lubrication
20	86984493	1	SHIELD, outboard half shaft with shield, male, Includes 21, 33
21	106109A2	1	SHAFT, male drive, Includes 22 – 32
22	86984494	1	SHAFT, male cardan telescoping
23	1545199C1	1	YOKE, inner shaft
24	838-5845	1	PIN, LOCK, M8 x 45, Slotted
25	1330586C1	1	KIT, REPAIR, cross and bearing, Includes 26 – 28
27	800-21240	4	RING, SNAP, M240, Int
28	321204	2	NIPPLE, LUBE, M6 x 1, 16mm lg
29	106089A2	1	CLUTCH ASSEMBLY, drive shaft, Includes 30, See Figure 09C-15A
30	1311950C1	1	KIT, push pin, yoke, Includes 31, 32
33	106105A2	1	SHIELD, INNER, inner male shaft, Includes 34 – 39
35	86984322	1	SHIELD, male shaft cone with collar
36	1544650C1	1	BEARING, Shield Support
39	1326632C1	2	CHAIN, safety
1	184596C2	1	JACKSHAFT, feeder, 1420 Combine
2	195560C3	1	JACKSHAFT, feeder, 1440 and 1460 combine
3	195559C3	1	JACKSHAFT, feeder, 1480 combine
0	106089A1	1	CLUTCH, drive shaft, Includes 2 – 11
2	224579A1	1	HOUSING, slip clutch
3	224587A2	1	YOKE, flange cover, auger drive
4	224585A1	1	HUB, , Includes 5
5	1311950C1	1	KIT, push pin, yoke
6	224584A1	2	PLATE, friction
7	224582A1	1	PLATE, pressure
8	224643A1	1	DISC, internal
9	224581A1	1	WASHER, SPRING, Belleville
10	224580A1	1	RING, SNAP
11	86512138	8	SCREW, Hex Soc Hd, M8 x 20, 12.9
0	106089A2	1	CLUTCH ASSEMBLY, drive shaft, Includes 2 – 11
2	86984908	1	FLANGE, slip clutch yoke
3	86984909	1	BUSHING, PTO Slip Clutch
4	224584A2	2	CLUTCH PLATE, friction
5	86984912	1	HUB, slip clutch, Includes 6
6	1311950C1	1	KIT, push pin, yoke, Includes 6A, 6B
7	86984911	1	PLATE, slip clutch thrust
8	86984914	1	COVER, slip clutch, ring
9	86984913	1	PLATE, spring, slip clutch belleville washer
10	386045	8	BOLT, Hex, M8 x 45, 8.8
11	832-41308	8	NUT, LOCK, M8 x 1.25, Cl 10
0	87519880	1	AUGER, 25.0 foot full fingered with extension
1	87395785	1	AUGER, 30.0 foot full fingered
2	435404A1	1	SHAFT, auger drive
3	9670285	12	BOLT, Hex, 3/8″-16 x 1″, G8, Full Thd
4	80680	12	WASHER, LOCK, 3/8″
5	1307256C1	1	RETAINER, auger LH
6	86624186	12	WASHER, 13/32″ x 1 1/8″ x .134″
7	429-106	12	NUT, 3/8″-16, G8
8	52443	6	BEARING, BALL
9	1307583C1	12	FLANGE, bearing 80 mm 4 bolt
10	231-5348	24	NUT, LOCK, Flg, 1/2″-13
11	455112R11	6	COLLAR, locking, bearing, with set screw
18	435252A1	1	SHAFT, auger finger main 993 mm
19	1326467C1	10	CLAMP, finger shaft
20	280504	30	BOLT, CARRIAGE, Short NK, 1/2″-13 x 2 1/4″, G5
21	1320698C1	10	ANGLE, auger finger shaft
22	87441009	10	PLATE, auger tube
23	435254A1	2	SHAFT, auger finger LH end 1877 mm
25	444038A1	1	SHAFT, auger finger, adjusting, 175 mm
26	444036A1	4	SHAFT, auger finger 162 mm
27	87450151	2	COVER, auger drum
28	281-1478	12	SCREW, SELF TAP, Hex Wash Hd, 1/4″ x 1/2″
29	477-73812	2	SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″
30	495-81143	2	WASHER, 13/32″ x 1 1/2″ x .120″
31	353-417	6	PLUG, Dome, 2.000″ hole, Nylon
33	435255A1	1	SHAFT, auger finger RH end 100 mm
34	87500981	1	SHAFT, auger finger 1115 mm, Used on 25′ model
34	435254A1	1	SHAFT, auger finger LH end 1877 mm, Used on 30′ model
35	87501827	1	SHAFT, auger finger 1010 mm, Used on 25′ model
35	435253A1	1	SHAFT, auger finger RH end 1772 mm, Used on 30′ model
40	9636698	30	NUT, LOCK, 1/2″-13, GB
41	231-5146	2	NUT, Flg, USR, 3/8″-16
1	125995A3	1	BEAM, main 15.0 foot
1	125999A3	1	BEAM, main 17.5 foot, BSN JJC0308544
1	126000A3	1	BEAM, main 20.0 foot, BSN JJC0308544
2	87034823	12	BOLT, Hex Flg, 1/2″-13 x 1″, G8, Full Thd, , BSN JJC0308544
3	1307374C7	1	POST, vertical LH, BSN JJC0308544
4	1307375C7	1	POST, vertical RH, BSN JJC0308544
5	87301492	12	NUT, Flg, USR, 1/2″-13, G8, , BSN JJC0308544
6	9790143	22	BOLT, Hex, 1/2″-13 x 1″, G8, Full Thd
7	232-5138	18	NUT, Flg, USR, 1/2″-13, G8
8	1326056C93	1	SHIELD, back with decal, LH 15.0 foot, Includes Decal
8	1326058C93	1	SHIELD, backsheet 17.5 foot LH, Includes Decal
8	1326060C93	1	SHIELD, backsheet 20.0 foot LH, Includes Decal
10	1326057C94	1	SHIELD, back with decal, RH 15.0 foot, Includes Decal
10	1326059C94	1	SHIELD, backsheet 17.5 foot RH, Includes Decal
10	1326061C94	1	SHIELD, backsheet 20.0 foot RH, Includes Decal
15	133973A1	4	ANGLE, shield chain, BSN JJC0308544
16	135370A1	1	STRIP, PROTECTION, 194 mm (7-5/8 in), Cut From 1330108CX, Cut From 1330108CX
17	87435C1	1	STRIP, PROTECTION, 76 mm (3″) long, cut from 1330108CX bulk, Cut From 1330108CX
21	477-73108	5	SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1/2″
22	135270	27	BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
28	130816A5	1	SUPPORT, endsheet header LH, Includes 32
31	130817A4	1	SUPPORT, endsheet RH, Includes 32
32	1313966C1	2	BAR, shim
33	86512174	6	BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr
34	255918	16	BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr
35	247780	24	NUT, Flg, USR, 3/8″-16
45	132965A1	1	BEAM, lower 15.0 foot
45	132964A1	1	BEAM, lower 17.5 foot, BSN JJC0308544
45	132963A1	1	BEAM, lower 20.0 foot, BSN JJC0308544
46	1316564C1	2	ANGLE, , BSN JJC0308544
53	280499	11	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd
53	9790143	22	BOLT, Hex, 1/2″-13 x 1″, G8, Full Thd
54	232-5138	20	NUT, Flg, USR, 1/2″-13, G8
58	1307371C1	2	LATCH, bar feeder dogbone, BSN JJC0308544
59	177134C3	2	U-BOLT, 5/8″-11, 4.6″ ID Height, 2.18″ ID Width
60	86520346	4	NUT, LOCK, 5/8″-11, GB
64	125450A1	1	SUPPORT, knife box
65	88707	2	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd
73	496-41066	2	WASHER, 21/32″ x 1 1/2″ x .188″, HDN
74	86512371	2	NUT, Flg, USR, 1/2″-13
1	126002A3	1	BEAM, main 22.5 foot, BSN JJC0308544
1	126004A3	1	BEAM, main 25.0 foot, BSN JJC0308544
1	126005A3	1	BEAM, main 30.0 foot, BSN JJC0308544
2	87034823	20	BOLT, Hex Flg, 1/2″-13 x 1″, G8, Full Thd
3	1307374C7	1	POST, vertical LH, BSN JJC0308544
4	1307375C7	1	POST, vertical RH, BSN JJC0308544
5	1307376C6	1	POST, intermediate LH, BSN JJC0308544
5	128414A4	1	POST, intermediate RH, BSN JJC0308544
6	87034823	40	BOLT, Hex Flg, 1/2″-13 x 1″, G8, Full Thd, , BSN JJC0308544
7	232-5138	14	NUT, Flg, USR, 1/2″-13, G8
8	135370A1	1	STRIP, PROTECTION, 194 mm (7-5/8 in), Cut From 1330108CX, Cut From 1330108CX
9	87435C1	1	STRIP, PROTECTION, 76 mm (3″) long, cut from 1330108CX bulk, Cut From 1330108CX
10	87301492	40	NUT, Flg, USR, 1/2″-13, G8, , BSN JJC0308544
12	1307093C1	1	SHEET, back LH 22.5 foot, BSN JJC0308544
12	1307095C1	1	SHEET, back LH 25.0 foot, BSN JJC0308544
12	1307097C1	1	SHEET, back LH 30.0 foot, BSN JJC0308544
14	1307094C1	1	SHEET, back RH 22.5 foot, BSN JJC0308544
14	1307096C1	1	SHEET, back RH 25.0 foot, BSN JJC0308544
14	1307098C1	1	SHEET, back RH 30.0 foot, BSN JJC0308544
15	133973A1	4	ANGLE, shield chain, BSN JJC0308544
17	1326062C93	1	SHIELD, backsheet center LH, Includes Decal
20	1326063C94	1	SHIELD, backsheet center RH, Includes Decal
21	477-73108	5	SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1/2″
22	135270	39	BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
28	130816A5	1	SUPPORT, endsheet header LH, Includes 32
31	130817A4	1	SUPPORT, endsheet RH, Includes 32
32	1313966C1	2	BAR, shim
33	86512174	6	BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr
34	255918	16	BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr
35	247780	22	NUT, Flg, USR, 3/8″-16
45	132962A1	1	BEAM, lower 22.5 foot
45	132960A1	1	BEAM, lower 25.0 foot, BSN JJC0308544
45	132959A1	1	BEAM, lower 30.0 foot, BSN JJC0308544
46	1316564C1	2	ANGLE, , BSN JJC0308544
53	280499	15	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd
54	86512371	8	NUT, Flg, USR, 1/2″-13
58	1307371C1	2	LATCH, bar feeder dogbone, BSN JJC0308544
59	177134C3	2	U-BOLT, 5/8″-11, 4.6″ ID Height, 2.18″ ID Width
60	86520346	4	NUT, LOCK, 5/8″-11, GB
64	125450A1	1	SUPPORT, knife box
65	88707	2	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd
73	496-41066	4	WASHER, 21/32″ x 1 1/2″ x .188″, HDN
74	232-5318	9	NUT, LOCK, Flg, 1/2″-13
76	280499	2	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd, , Used to plug holes on lower beam.
77	86624148	2	WASHER, 17/32″ x 1 1/2″ x .179″, , Used to plug holes on lower beam.
78	86512371	2	NUT, Flg, USR, 1/2″-13, , Used to plug holes on lower beam.
1	132645A1	1	DIVIDER, support, LH
2	131684A4	1	DIVIDER, support, RH
2	368945A1	1	DIVIDER, RH, BSN JJC0308544
4	247780	5	NUT, Flg, USR, 3/8″-16
5	433-816	4	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5
6	86512371	6	NUT, Flg, USR, 1/2″-13
8	131686A1	2	ROD, divider
9	477-73124	2	SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1 1/2″
11	1316704C1	1	PLATE, LARGE, divider, LH
12	135270	2	BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
13	145458	2	NUT, Flg, USR, 5/16″-18
14	1326343C1	1	DEFLECTOR, divider RH
15	477-82512	2	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″
16	523282	3	NUT, Flg, USR, 1/4″-20
17	9706726	1	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
18	280185	2	BOLT, CARRIAGE, Short NK, 1/2″-13 x 2″, G5
19	700121908	2	SPACER, 1/4 X 3/8″
20	340-12524	1	SCREW, Cross Pan Hd, 1/4″-20 x 1 1/2″
21	231-5315	2	NUT, LOCK, Flg, 5/16″-18
22	573713R1	2	SPACER, 3/4″ Tube x 11/16″
23	301106A1	1	SHIELD, cutter bar RH, BSN JJC0308544
24	477-82512	2	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″
25	523282	2	NUT, Flg, USR, 1/4″-20
3	477-73816	4	SCREW, Sltd Serr Truss Hd, 3/8″ x 1″
1	368943A1	1	DIVIDER, LH
2	368945A1	1	DIVIDER, RH, BSN JJC0308544
4	247780	5	NUT, Flg, USR, 3/8″-16
5	433-816	4	BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5
6	86512371	6	NUT, Flg, USR, 1/2″-13
8	369442A1	2	ROD, divider with reflector, Includes 26
8	368941A1	2	ROD, divider without reflector
9	9706726	2	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
11	1316704C2	1	PLATE, STEEL, crop divider
12	135270	2	BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
13	145458	2	NUT, Flg, USR, 5/16″-18
14	1326343C1	1	DEFLECTOR, divider RH
15	477-82512	2	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″
16	523282	3	NUT, Flg, USR, 1/4″-20
17	9706726	1	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
18	280185	2	BOLT, CARRIAGE, Short NK, 1/2″-13 x 2″, G5
20	340-12524	1	SCREW, Cross Pan Hd, 1/4″-20 x 1 1/2″
22	573713R1	2	SPACER, 3/4″ Tube x 11/16″
23	301106A1	1	SHIELD, cutter bar RH, BSN JJC0308544
24	477-82512	2	SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″
25	523282	2	NUT, Flg, USR, 1/4″-20
26	369441A1	1	REFLECTOR, divider rod
3	477-73816	4	SCREW, Sltd Serr Truss Hd, 3/8″ x 1″
1	1307045C2	1	SHIELD, center bottom
2	129274A3	1	SHIELD, outer, RH 15.0 foot
2	129276A3	1	SHIELD, bottom 17.5 foot
2	129278A3	1	SHIELD, bottom 20.0 foot
3	129274A3	1	SHIELD, outer, RH 15.0 foot
3	129276A3	1	SHIELD, bottom 17.5 foot
3	129278A3	1	SHIELD, bottom 20.0 foot
4	9706726	6	BOLT, Hex Flg, 3/8″-16 x 1″, Serr
5	232-5318	6	NUT, LOCK, Flg, 1/2″-13
1	1307045C2	3	SHIELD, center bottom
2	129280A3	1	SHIELD, outer RH 22.5 foot
2	129282A3	1	SHIELD, bottom 25.0 foot
2	129284A3	1	SHIELD, bottom 30.0 foot
3	129280A3	1	SHIELD, outer RH 22.5 foot
3	129282A3	1	SHIELD, bottom 25.0 foot
3	129284A3	1	SHIELD, bottom 30.0 foot
4	30944	10	BOLT, Hex Flg, 1/2″-13 x 1″, Serr
5	232-5318	10	NUT, LOCK, Flg, 1/2″-13
1	1320654C1	1	FINGER BAR, 15.0 foot
1	1320655C1	1	FINGER BAR, 17.5 foot, BSN JJC0308544
1	1320656C1	1	FINGER BAR, 20.0 foot, BSN JJC0308544
1	1320904C1	1	FINGER BAR, 22.5 foot
11	174266C1	1	CHAIN (AGRICULTURE)
12	127360A2	1	POTENTIOMETER, height control
12	245885C93	1	POTENTIOMETER, ASSY, Adapt 1995 and Later Headers to 1600 Series Combines
12	1301147C91	1	POTENTIOMETER, for combines with “electro hydraulic”, For 1400 Series Combines with
13	87016	2	WASHER, 3/8″, SAE
16	291207C1	1	CLAMP, 15 1/2″
17	1968782C1	1	ARM, potentiometer control, Alternate with 131175A1
17	131175A1	1	ARM, potentiometer control, Alternate with 1968782C1
18	483-1084	1	SET SCREW, Hex Soc, #8-32 x 1/4″
19	1314088C2	1	CABLE PULLING GRIP, height control
20	148151	1	PIN, SPLIT (COTTER), Hairpin, 716″, , BSN JJC0308544
22	280236	1	PIN, SPLIT (COTTER), 1/16″ x 1/2″
23	27329R1	1	PIN, CLEVIS, 3/16″ x 1.152″
24	87361	9	WASHER, 1/4″, SAE
25	1308301C2	1	BRACKET, height control cable, BSN JJC0308544
26	145913	4	BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
27	145458	4	NUT, Flg, USR, 5/16″-18
28	1308299C5	1	STRAP, potentiometer
1	184853C1	1	DEFLECTOR, LH Front
2	184854C1	1	DEFLECTOR, RH front
3	135270	11	BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
4	145458	11	NUT, Flg, USR, 5/16″-18
5	181669C1	1	SHIELD, feeder adapter, 1480 Combine
5	1319220C1	1	SHIELD, feeder adapter, 1420, 1440 or 1460 Combine
3	255416A2	1	SHIELD, center
4	278345A2	1	SHIELD, 1143 mm (45″), 17.5 Foot Header
4	255407A2	1	SHIELD, 1524 mm (60″), 25.0 and 30.0 Foot Headers
5	257147A2	1	SHIELD, 762 mm (30″), 20.0 and 22.5 Foot Headers
5	278345A2	1	SHIELD, 1143 mm (45″), 22.5 Foot Header
5	255407A2	1	SHIELD, 1524 mm (60″), 30.0 Foot Header
6	295583A1	1	BRACKET, corner right
8	295585A1	1	SHEET, corner RH
12	295586A1	1	BRACKET, right front
16	259464A2	1	SHEET, guard, corner lower, RH
18	477-73812	5	SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″
19	247780	6	NUT, Flg, USR, 3/8″-16
3	255416A2	1	SHIELD, center
4	278345A2	1	SHIELD, 1143 mm (45″), 17.5 Foot Header
4	255407A2	1	SHIELD, 1524 mm (60″), 25.0 and 30.0 Foot Headers
5	257147A2	1	SHIELD, 762 mm (30″), 20.0 and 22.5 Foot Headers
5	278345A2	1	SHIELD, 1143 mm (45″), 22.5 Foot Header
5	255407A2	1	SHIELD, 1524 mm (60″), 30.0 Foot Header
7	295582A1	1	BRACKET, corner left
9	295584A1	1	SHEET, corner, LH
13	295587A1	1	BRACKET, left front
17	259465A2	1	SHEET, guard, corner lower, LH
18	477-73812	5	SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″
19	247780	6	NUT, Flg, USR, 3/8″-16
1	1316996C2	1	DECAL, 1010, model number
2	298422A1	2	DECAL, Warning Keep Shields In Place
3	298426A1	2	DECAL, Danger Crush Hazard
4	80672C1	1	DECAL, danger, rotating driveline
5	179245C1	3	DECAL, lubrication – 10 hours
6	179246C1	3	DECAL, lubrication – 50 hours
7	179244C1	4	DECAL, instructions, grease – 100 hours
10	185067A1	2	DECAL, warning, avoid injury, always lock both reel lift cylinders
0	299010A2	1	KIT, DECALS, French, Includes 2, 3, 4, 10
2	298423A1	2	DECAL, Warning Keep Shields In Place, QU-FRENCH
3	298427A1	2	DECAL, Danger Crush Hazard, QU-FRENCH
4	353718A1	2	DECAL, danger, Rotating Driveline
10	298989A1	2	DECAL, warning, safety lock, QU-FRENCH
0	299013A2	1	KIT, DECALS, Latin America and Spanish, Includes 2, 3, 4, 10
2	298424A1	2	DECAL, Warning Keep Shields In Place
3	298428A1	2	DECAL, Danger Crush Hazard
4	308950A1	2	DECAL, Outer, Guard, Latin American Spanish
10	298987A1	2	DECAL, warning, safety lock
0	299016A3	1	KIT, DECALS, Latin American and Portuguese, Includes 2, 3, 4, 10
2	298425A2	2	DECAL, warning, keep shields in place Portuguese
3	298429A2	2	DECAL, danger, header crush Portuguese
4	308949A2	2	DECAL, danger, driveline Portuguese
10	298988A2	2	DECAL, warning, safety lock Portuguese
0	298430A2	1	KIT, DECALS, European, non-word, Includes 1 – 3
1	296797A1	2	DECAL, warning, safety lock
2	293849A1	2	DECAL, Danger Crush Hazard
2	87027712	2	DECAL, header crush safety
3	237175A1	4	DECAL, Warning Keep Shields In Place
14	296796A1	2	DECAL, auger lift bracket
15	1284374C1	2	REFLECTOR, red
15	1284365C2	2	REFLECTOR, amber 1.97″ x 4.3″
19	1326528C1	2	DECAL, Danger, shield missing, do not operate
20	1326752C1	2	DECAL, lubrication instruction, ASN JJC0304189
21	433531A1	2	DECAL, PTO driveline lubrication, BSN JJC0304189
21	433531A2	2	DECAL, PTO driveline lubrication, ASN JJC0304190
24	1326618C1	1	DECAL, drive identification
25	1326619C1	1	DECAL, fore/aft detent

CASE 1010 Grain header — parts list

04-01 WIRING HARNESS AND LAMP MOUNTING BSN JJC0304999

04-02 WIRING HARNESS AND LAMP MOUNTING ASN JJC0305000

04-03 WARNING LIGHT

08-01 REEL DRIVE MOTOR SYSTEM

08-02 REEL FORE AND AFT HYDRAULIC SYSTEM – 15.0, 17.5 AND 20.0 FOOT

08-03 REEL FORE AND AFT HYDRAULIC SYSTEM – 22.5, 25.0 AND 30.0 FOOT

08-04 REEL LIFT HYDRAULIC SYSTEM – 15.0, 17.5 AND 20.0 FOOT

08-05 REEL LIFT HYDRAULIC SYSTEM – 22.5, 25.0 AND 30.0 FOOT

08-06 REEL DRIVE MOTOR

08-07 REEL FORE AND AFT CYLINDER BAT REEL

08-08 REEL FORE AND AFT CYLINDER PICKUP REEL

08-09 REEL LIFT MASTER CYLINDER

08-10 REEL LIFT SLAVE CYLINDER

08-11 HEADER TO COMBINE CONNECTING HOSES 1400 SERIES COMBINES

08-12 REEL FORE AND AFT ATTACHMENT 1400 SERIES COMBINES

08-13 CONTROL VALVE ASSY – REEL FORE AND AFT ATTACHMENT – 1400 SERIES COMBINES

08-14 REEL DRIVE SYSTEM 1440E, 1460E AND 1480E COMBINE

08-15 REEL DRIVE SYSTEM 1440E, 1460E AND 1480E COMBINE

08-16 REEL DRIVE VALVE

08-17 REEL DRIVE PUMP ASSEMBLY

Parts list

Leave a Reply Cancel reply