CASE 1020 Grain Header

      No Comments on CASE 1020 Grain Header

CASE 1020 Grain Header — parts list

981 part numbers across 1 assemblies, transcribed from the catalogue above. Search this page for a part number to find the assembly it belongs to.

Parts list

Pos Part no. Qty Description
2 495-11053 2 WASHER, 1/2″, SAE (17/32″ x 1-1/16″ x 3/32″)
3 80679 2 Washer, Lock, 1/2″
4 425-118 2 NUT – hex, 1/2 inch NF
5 126890A1 2 SHIELD – marker light
6 409-7512 4 BOLT – hex serrated flange, 5/16 NC x 3/4 inch
7 231-5145 4 NUT – hex serrated flange, 5/16 inch NC
8 127031A1 2 SUPPORT – marker light
9 256873 2 BOLT – hex serrated flange, 5/16 NC x 1/2 inch
10 231-5145 2 NUT – hex serrated flange, 5/16 inch NC
11 127057A1 2 ANGLE – marker light
12 140374A1 2 U-BOLT – support mounting
13 231-4215 4 NUT – hex, self-locking, 5/16 inch NC
14 409-7612 4 BOLT – hex serrated flange, 3/8 NC x 3/4 inch
15 231-5146 4 NUT, Flg, USR, 3/8″-16
16 128896A1 1 HARNESS – lamp, marker lights
17 362120R1 2 CLAMP – P-type, harness
18 702093C1 2 STRAP – tie, nylon retaining
2 A41264 1 BULB, #1156, 12V, Lamp
3 A43731 2 GASKET – sealing, lens
7 187-1083 8 SCREW – self-tapping, round head Phillips, No. 8 NC x 5/8 inch
8 495-11053 1 WASHER, 1/2″, SAE (17/32″ x 1-1/16″ x 3/32″)
9 80679 1 Washer, Lock, 1/2″
10 425-118 1 NUT – hex, 1/2 inch NF
2 237-6010 4 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
4 218-5230 4 ELBOW – 90 degree, 3/4-16 inch flare x swivel
5 131057A1 2 HOSE – 1270 mm (50 inch) long, hydraulic, 3/8 ID (Pick-up reel)
6 L18337 2 STRAP – tie, 15 inch, nylon
8 1338406C1 2 TUBE – reel drive
11 1338408C1 2 TUBE – reel drive (15.0 foot)
11 1338409C1 2 TUBE – reel drive (16.5 foot)
11 1316443C1 2 TUBE – reel drive (17.5 foot)
11 1338410C1 2 TUBE – reel drive (20.0 foot)
11 1338411C1 2 TUBE – reel drive (22.5 foot)
11 1338412C1 2 TUBE – reel drive (25.0 foot)
11 1338413C1 2 TUBE – reel drive (30.0 foot)
15 218-674 1 ADAPTER – straight, 3/4-16 inch flare x bulkhead flare
16 218-1255 1 NUT, LOCK, Blkhd, 3/4″-16
17 1316779C1 1 ANGLE – quick disconnect support
18 281-14812 2 SCREW – self-tapping, hex washer head, 5/16 NC x 3/4 inch
19 1321398C1 1 CLAMP – quick disconnect
23 413-48 2 BOLT – hex, 1/4 NC x 1/2 inch
24 218-5060 2 ADAPTER – straight, 3/4-16 flare x 7/8-14 inch O-ring boss
25 1282338C91 1 COUPLING – self-sealing female, 7/8-14 inch
26 1954133C1 1 PLUG – coupling, dust
28 1316829C1 1 HOSE – 965 mm (38 inch) long, hydraulic, 3/8 ID
29 1345266C1 1 WASHER – lock, white, special
30 1272399C2 1 COUPLER – self sealing, male, 7/8 inch NF
32 218-5146 2 ELBOW – 45 degree, 3/4-16 flare x 7/8-14 inch adj O-ring
34 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
35 413-828 2 BOLT – hex, 1/2 NC x 1-3/4 inch, if used
36 396-21053 2 WASHER – flat, 17/32 x 1-1/16 x 1/8 inch, hardened
37 231-5144 2 NUT, Flg, USR, 1/4″-20
2 218-5105 4 ELBOW – 90 degree, 9/16-18 inch flare x adj O-ring boss
4 1277506C1 1 HOSE – 1194 mm (47 inch) long, hydraulic, 1/4 ID
5 183825C1 4 CLAMP – tube retaining
7 231-5344 4 NUT – hex flange, self-locking, 1/4 inch NC
8 218-980 6 ELBOW – 90 degree, 9/16-18 inch flare x swivel
9 147876C1 1 HOSE – 1143 mm (45 inch) long, hydraulic, 1/4 ID
10 141425A1 1 HOSE – 1448 mm (57 inch) long, hydraulic, 1/4 ID
13 147875C1 1 HOSE – 890 mm (35 inch) long, hydraulic, 1/4 ID
15 1338414C1 1 TUBE – fore and aft (15.0 foot)
15 1338415C1 1 TUBE – fore and aft (16.5 foot)
15 1338416C1 1 TUBE – fore and aft (17.5 foot)
15 1316596C1 1 TUBE – fore and aft (20.0 foot)
16 1338420C1 1 TUBE – fore and aft
17 138333A1 1 TUBE – fore and aft (15.0 foot)
17 1326831C2 1 TUBE – fore and aft (16.5 foot)
17 138334A1 1 TUBE – fore and aft (17.5 foot)
17 138335A1 1 TUBE – fore and aft (20.0 foot)
18 1316601C1 1 TUBE – fore and aft (15.0 foot)
18 1338417C1 1 TUBE – fore and aft (16.5 foot)
18 1316604C1 1 TUBE – fore and aft (17.5 foot)
18 1338420C1 1 TUBE – fore and aft (20.0 foot)
19 1338418C1 1 TUBE – fore and aft (15.0 and 17.5 foot)
19 1338421C1 1 TUBE – fore and aft (16.5 and 20.0 foot)
20 218-673 1 ADAPTER – straight, 9/16-18 inch flare x bulkhead flare
21 218-5354 2 FITTING, 9/16″-18, 37° x 7/8″-14, O-Ring
23 218-1254 1 NUT – hex, lock, bulkhead, 9/16 inch NF
25 413-448 4 BOLT – hex, 1/4 NC x 3 inch
26 1326573C1 4 SPACER – 45 mm long
27 702093C1 2 STRAP – tie, nylon
28 1954133C1 1 PLUG – coupling, dust
29 1282338C91 1 COUPLING – self-sealing female, 7/8-14 inch
30 237-6010 2 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
33 1316779C1 1 ANGLE – quick disconnect support
34 281-14812 2 SCREW – self-tapping, hex washer head, 5/16 NC x 3/4 inch
35 1321398C1 1 CLAMP – quick disconnect
36 413-48 2 BOLT – hex, 1/4 NC x 1/2 inch
37 1254527C2 1 HOSE – 940 mm (37 inch) long, hydraulic, 1/4 ID
38 1541792C1 1 WASHER – lock, red, special
39 1272399C2 1 COUPLER – self sealing, male, 7/8 inch NF
41 231-5144 2 NUT, Flg, USR, 1/4″-20
45 485093C1 2 CLAMP – double, hose
46 495-21031 2 WASHER – flat, 5/16 x 3/4 x 1/16 inch
47 413-440 2 BOLT – hex, 1/4 NC x 2-1/2 inch
48 231-5344 2 NUT – hex flange, self-locking, 1/4 inch NC
3 237-6006 4 O-Ring, 6-1, 90 Duro, .468″ ID x .078″ Thk
2 218-5105 4 ELBOW – 90 degree, 9/16-18 inch flare x adj O-ring boss
4 1277506C1 1 HOSE – 1194 mm (47 inch) long, hydraulic, 1/4 ID
5 183825C1 6 CLAMP – tube retaining
7 231-5344 6 NUT – hex flange, self-locking, 1/4 inch NC
8 218-980 6 ELBOW – 90 degree, 9/16-18 inch flare x swivel
9 147876C1 1 HOSE – 1143 mm (45 inch) long, hydraulic 1/4 ID
10 141425A1 1 HOSE – 1448 mm (57 inch) long, hydraulic 1/4 ID
13 147875C1 1 HOSE – 890 mm (35 inch) long, hydraulic, 1/4 ID
15 1316598C1 1 TUBE – center (22.5 and 25.0 foot)
15 1338421C1 1 TUBE – center (30.0 foot)
16 1338420C1 1 TUBE – fore and aft (22.5 and 25.0 foot)
16 1338420C1 1 TUBE – fore and aft (30.0 foot)
17 1316602C2 1 TUBE – fore and aft (22.5 foot)
17 138338A1 1 TUBE – fore and aft (25.0 foot)
17 1338420C1 1 TUBE – fore and aft (30.0 foot), longer tube
18 1316597C1 1 TUBE – fore and aft (22.5 foot)
18 1316601C1 1 TUBE – fore and aft (25.0 foot)
18 1316604C1 1 TUBE – fore and aft (30.0 foot)
19 1316603C1 2 TUBE – fore and aft (22.5 foot)
19 1316605C1 2 TUBE – fore and aft (25.0 foot)
19 1338420C1 2 TUBE – fore and aft (30.0 foot)
20 218-673 1 ADAPTER – straight, 9/16-18 flare x bulkhead flare
21 218-5354 2 FITTING, 9/16″-18, 37° x 7/8″-14, O-Ring
23 218-1254 1 NUT – hex, lock, bulkhead, 9/16 inch NF
25 413-448 6 BOLT – hex, 1/4 NC x 3 inch
26 1326573C1 6 SPACER – 45 mm long
27 702093C1 2 STRAP – tie, nylon
28 1954133C1 1 PLUG – coupling, dust
29 1282338C91 1 COUPLING – self-sealing female, 7/8-14 inch
30 237-6010 2 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
33 1316779C1 1 ANGLE – quick disconnect support
34 281-14812 2 SCREW – self-tapping, hex washer head, 5/16 NC x 3/4 inch
35 1321398C1 1 CLAMP – quick disconnect
36 413-48 2 BOLT – hex, 1/4 NC x 1/2 inch
37 1254527C2 1 HOSE – 940 mm (37 inch) long, hydraulic, 1/4 ID
38 1541792C1 1 WASHER – lock, red, special
39 1272399C2 1 COUPLER – self sealing, male, 7/8 inch NF
41 231-5144 2 NUT, Flg, USR, 1/4″-20
45 485093C1 2 CLAMP – double, hose
46 495-21031 2 WASHER – flat, 5/16 x 3/4 x 1/16 inch
47 413-440 2 BOLT – hex, 1/4 NC x 2-1/2 inch
48 231-5344 2 NUT – hex flange, self-locking, 1/4 inch NC
3 237-6006 4 O-Ring, 6-1, 90 Duro, .468″ ID x .078″ Thk
3 218-5105 2 ELBOW – 90 degree, 9/16-18 inch flare x adj O-ring boss
4 218-5135 1 ELBOW – 45 degree, 9/16-18 inch flare x adj O-ring boss
6 218-980 4 ELBOW – 90 degree, 9/16-18 inch flare x swivel
7 218-673 1 ADAPTER – straight, 9/16-18 inch flare x bulkhead flare
8 218-1254 1 NUT – hex, lock, bulkhead, 9/16 inch NF
9 183821C1 1 CLAMP – tube retaining, single
10 183825C1 3 CLAMP – tube retaining, double
11 1254527C2 1 HOSE – 940 mm (37 inch) long, hydraulic, 1/4 ID
12 413-428 4 BOLT – hex, 1/4 NC x 1-3/4 inch
13 1326572C1 4 SPACER – 10 mm, long
14 231-5344 4 NUT – hex flange, self-locking, 1/4 inch NC
15 147875C1 3 HOSE – 890 mm (35 inch) long, hydraulic, 1/4 ID
16 515-23206 1 CLAMP – single, hose
17 485093C1 1 CLAMP – double, hose
18 154273C1 2 BOLT – hex, self-locking, special, 3/8 NC x 1 inch
19 231-5146 2 NUT, Flg, USR, 3/8″-16
20 1338418C1 1 TUBE – reel lift (15.0 and 17.5 foot)
20 1338421C1 1 TUBE – reel lift (16.5 and 20.0 foot)
21 1316601C1 1 TUBE – reel lift (15.0 foot)
21 1338417C1 1 TUBE – reel lift (16.5 foot)
21 1316604C1 1 TUBE – reel lift (17.5 foot)
21 1338420C1 1 TUBE – reel lift (20.0 foot)
23 1338419C1 1 TUBE – reel lift
24 1338414C1 1 TUBE – reel lift (15.0 foot)
24 1338415C1 1 TUBE – reel lift (16.5 foot)
24 1338416C1 1 TUBE – reel lift (17.5 foot)
24 1316596C1 1 TUBE – reel lift (20.0 foot)
25 1541804C1 1 WASHER – black, special
26 218-5354 1 FITTING, 9/16″-18, 37° x 7/8″-14, O-Ring
27 237-6010 1 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
28 1272399C2 1 COUPLER – self sealing, male, 7/8 inch NF
5 237-6006 3 O-Ring, 6-1, 90 Duro, .468″ ID x .078″ Thk
3 218-5105 2 ELBOW – 90 degree, 9/16-18 inch flare x adj O-ring boss
4 218-5135 1 ELBOW – 45 degree, 9/16-18 inch flare x adj O-ring boss
6 218-980 4 ELBOW – 90 degree, 9/16-18 inch flare x swivel
7 218-673 1 ADAPTER – straight, 9/16-18 inch flare x bulkhead flare
8 218-1254 1 NUT – hex, lock, bulkhead, 9/16 inch NF
9 183821C1 2 CLAMP – tube retaining, single
10 183825C1 4 CLAMP – tube retaining, double
11 1254527C2 1 HOSE – 940 mm (37 inch) long, hydraulic, 1/4 ID
12 413-428 6 BOLT – hex, 1/4 NC x 1-3/4 inch
13 1326572C1 6 SPACER – 10 mm, long
14 231-5344 6 NUT – hex flange, self-locking, 1/4 inch NC
15 147875C1 3 HOSE – 890 mm (35 inch) long, hydraulic, 1/4 ID
16 515-23206 1 CLAMP – single, hose
17 485093C1 1 CLAMP – double, hose
18 154273C1 2 BOLT – hex, self-locking, special, 3/8 NC x 1 inch
19 231-5146 2 NUT, Flg, USR, 3/8″-16
20 1316597C1 1 TUBE – reel lift (22.5 foot)
20 1316601C1 1 TUBE – reel lift (25.0 foot)
20 1316604C1 1 TUBE – reel lift (30.0 foot)
21 1316603C1 2 TUBE – reel lift (22.5 foot)
21 1316605C1 2 TUBE – reel lift (25.0 foot)
21 1338420C1 2 TUBE – reel lift (30.0 foot)
23 1316598C1 1 TUBE – reel lift (22.5 and 25.0 foot)
23 1338421C1 1 TUBE – reel lift (30.0 foot)
24 1338419C1 1 TUBE – reel lift
25 1541804C1 1 WASHER – black, special
26 218-5354 1 FITTING, 9/16″-18, 37° x 7/8″-14, O-Ring
27 237-6010 1 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
28 1272399C2 1 COUPLER – self sealing, male, 7/8 inch NF
5 237-6006 3 O-Ring, 6-1, 90 Duro, .468″ ID x .078″ Thk
1 130409A1 1 MOTOR ASSEMBLY – reel drive, Includes: Ref. 2 – 18
11 126-124 1 Woodruff Key, #15, 1/4″ x 1″, HT
2 232-4617 1 NUT, LOCK, 7/16″-20, GC
3 1282016C1 1 ROD – piston
4 1282017C2 1 PISTON – cylinder
5 108996C1 1 GLAND – cylinder, front
6 547549R1 1 RING – retaining, front head
10 238-6012 1 O-RING, -012, 90 Duro, .364″ ID x .070″ Thk
11 108999C1 1 WIPER – rod
12 108997C1 1 RING – backup
13 238-6116 1 O-RING, -116, 90 Duro, .737″ ID x .103″ Thk
14 108998C1 1 RING – backup
15 238-6121 1 O-RING, -121, 90 Duro, 1.049″ ID x .103″ Thk
16 532529R2 1 RING – quad
17 239-5119 1 SEAL – quad, 15/16 ID x 3/32 inch
2 547384R1 1 GLAND – cylinder
3 128724A1 1 ROD – piston
4 547333R3 1 PISTON – cylinder
5 548033R1 1 NUT – hex jam, self locking, 3/4 inch NF
6 238-6017 1 O-RING, -017, 90 Duro, .676″ ID x .070″ Thk
7 239-5123 1 SEAL – quad, 1-3/16 ID x 3/32 inch
8 547383R2 1 RING – seal
10 238-6126 1 O-RING – 1-3/8 ID x 3/32 inch wide
11 1272317C1 1 SEAL – rod
12 564808R91 1 WIPER – rod
2 463-1104 1 SCREW, Hex Hd, #10-24 x 1/4″
3 128727A1 1 ROD – piston
4 145190C1 1 RING – retaining
5 532773R1 1 WIPER – piston rod
6 533145R1 1 WASHER – rubber bonded
7 119185C1 1 SEAL – piston rod
1 179202C1 1 HOSE – 1727 mm (68 inch) long, header to combine reel lift
2 218-5057 1 ADAPTER – straight, 9/16-18 inch flare x O-ring boss
4 187563C1 1 COUPLING – female, 9/16-18 inch, thread
5 165678C91 2 HOSE – 1676 mm (66 inch) long, header to combine reel drive, header to combine pick up drive
6 218-5060 1 ADAPTER – straight, 3/4-16 flare x 7/8-14 inch O-ring boss
7 237-6010 1 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
8 395149R1 1 COUPLER – male, 7/8 inch NF
8 1272399C2 1 COUPLER – self sealing, male, 7/8 inch NF
3 237-6006 1 O-Ring, 6-1, 90 Duro, .468″ ID x .078″ Thk
2 237-6008 2 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
3 218-5128 2 ELBOW – 90 degree, 9/16-18 flare x 3/4-16 inch adj O-ring boss
4 1321591C1 1 HOSE – reel, 2400 mm (94-1/2 inch) long, 5/16 ID
5 1284369C1 1 HOSE – 3300 mm (130 inch) long, reel aft, 5/16 ID
6 1541792C1 1 WASHER – lock, red, special
7 218-5354 2 FITTING, 9/16″-18, 37° x 7/8″-14, O-Ring
8 237-6010 2 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
9 1282338C91 1 COUPLING – self-sealing female, 7/8-14 inch
10 1272399C2 1 COUPLER – self sealing, male, 7/8 inch NF
11 306132C1 5 STRAP – tie, 14 inch, nylon
13 1301630C2 2 TUBE – through
14 238-6012 6 O-RING, -012, 90 Duro, .364″ ID x .070″ Thk
15 424-496 3 BOLT – hex, 1/4 NC x 6 inch, grade 2
16 493-41026 3 WASHER – external tooth lock, 1/4 inch
17 1301637C1 2 ORIFICE – valve
20 1866277R1 1 HARNESS – wiring
21 1301175C1 1 SWITCH – fore and aft
22 440-1068 2 SCREW – machine, pan Phillips, No. 6 NC x 1/2 inch
23 1301940C3 1 COVER – console extension
24 24613R1 4 SCREW – oval head, No. 10-16 x 3/4 inch
25 262965C91 1 BREAKER – circuit, 10 ampere
26 492-11010 2 Washer, Lock, #10
27 225-14210 2 NUT, #10-32
28 22-824 3 STRAP – tie, 7 inch, retaining
29 537024R1 1 CLIP – edge
1 100475A1 2 PLUG – end cap
3 100474A1 2 SPRING – centering
4 237-6010 2 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk, Part of valve seal kit P/N 1282278C2
5 1301687C1 2 RETAINER – spring
6 238-6019 2 O-RING, -019, 90 Duro, .801″ ID x .070″ Thk, Part of valve seal kit P/N 1282278C2
7 1301627C3 2 SLEEVE – poppet
8 1301624C1 2 BUSHING – poppet
9 1301640C1 2 SPRING – poppet
10 1301648C1 2 ARMATURE – valve, poppet
11 1301624C1 2 BUSHING – poppet, pole
12 1301625C1 2 ORIFICE – valve
13 110550A1 2 POPPET – valve
14 238-6010 2 O-RING, -010, 90 Duro, .239″ ID x .070″ Thk, Part of valve seal kit P/N 1282278C2
19 124777A1 1 SPOOL – shuttle
30 124775A1 1 BODY – check valve, end cap
31 238-6114 1 O-RING, -114, 90 Duro, .612″ ID x .103″ Thk, Part of valve seal kit P/N 1282278C2
32 1272887C1 1 SPRING – poppet, spool
33 124771A1 1 POPPET – valve, spool
34 238-6014 1 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk, Part of valve seal kit P/N 1282278C2
35 1267163C1 1 SEAT – valve
36 1301633C1 2 COIL – valve
37 1301632C1 2 COVER – coil
38 107825 2 NUT – hex, 1/2 inch NF, stamped
39 225-20210 2 NUT, #10-32, Brass
40 1301637C1 2 ORIFICE – valve
2 409-7824 2 BOLT – hex serrated flange, 1/2 NC x 1-1/2 inch
3 231-5148 2 NUT, Flg, USR, 1/2″-13
4 1282383C1 1 FITTING – beaded tube, 1 inch ID hose
5 237-6020 1 O-RING, 20-1, 90 Duro, 1.475″ ID x .118″ Thk
6 218-5119 1 ELBOW – 90 degree, 7/8-14 flare x 1-1/16-12 inch adj O-ring boss
8 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .116″ Thk
9 1315460C1 1 HOSE – pump pressure, 900 mm (35 inch) long, hydraulic, 1/2 ID
11 413-552 2 BOLT – hex, 5/16 NC x 3-1/4 inch
12 425-105 2 NUT – hex, 5/16 inch NC
13 492-11031 2 WASHER, LOCK, 5/16″
15 198303C1 1 HOSE – 1016 mm (40 inch) long, cut from 190851C2 hose, suction
16 214-1416 2 CLAMP, HOSE, #16, 0.81/1.50 Type F Worm, Adj.
17 218-5107 1 ELBOW – 90 degree, 7/8-14 inch flare x adj O-ring boss
18 218-5106 1 ELBOW – 90 degree, 3/4-16 inch flare x adj O-ring boss
19 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
20 1317073C1 1 HOSE – 635 mm (25 inch) long, hydraulic, 1/2 ID
21 196746C1 1 TUBE – reel drive return, 1460E Combine., 1440E Combine.
21 187830C1 1 TUBE – reel drive return, 1480E Combine.
23 1312411C1 1 TUBE – reel drive return, 1460E Combine., 1440E Combine.
23 1325306C1 1 TUBE – reel drive return, 1480E Combine.
24 306132C1 1 STRAP – tie, 14 inch, nylon
39 218-5062 1 ADAPTER – straight, 7/8-14 inch flare x O-ring boss
40 395150R91 1 COUPLING – self sealing, female (Alternate with A177478)
40 A177478 1 COUPLING – self-sealing, female (Alternate with 395150R91)
41 395149R1 1 COUPLER – male, 7/8 inch NF (Alternate with 1272399C2)
41 1272399C2 1 COUPLER – self sealing, male, 7/8 inch NF (Alternate with 395149R1)
42 218-5060 1 ADAPTER – straight, 3/4-16 flare x 7/8-14 inch O-ring boss
43 196878C1 1 HOSE – 1422 mm (56 inch) long, hydraulic, 3/8 ID, 1440E Combine with 47 inch feeder., 1460E
43 179411C1 1 HOSE – 1549 mm (61 inch) long, hydraulic, 3/8 ID, 1460E Combine with 54.5 inch feeder., 1480E
44 1317169C1 1 HOSE – 686 mm (27 inch) long, hydraulic, 3/8 ID
45 1312410C1 1 TUBE – reel lift, 1460E Combine with 47 inch feeder., 1460E Combine with 54.5 inch feeder., 1440E
46 187562C1 1 COUPLING – male, 9/16 NF inch
48 214-1412 2 CLAMP, HOSE, #12, 0.69/1.25 Type F Worm
47 237-6006 1 O-Ring, 6-1, 90 Duro, .468″ ID x .078″ Thk
3 1301336C2 1 MOTOR ASSEMBLY – valve, Includes: Ref. 4 & 5
4 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
5 238-6011 2 O-RING, -011, 90 Duro, .301″ ID x .070″ Thk
6 1301996C1 1 VALVE – compensator
7 238-5016 1 O-RING, -016, 70 Duro, .614″ ID x .070″ Thk
8 413-414 3 BOLT – hex, 1/4 NC x 7/8 inch
13 238-6159 2 O-RING, -159, 90 Duro, 4.977″ ID x .103″ Thk
16 A25139 1 SEAL – shaft
17 100-21137 1 Ring, Snap, 1.375″, Int, #137
21 166-55 4 BOLT – 12 point, 3/8 NC x 3-1/2 inch grade 8
22 166-59 4 BOLT – 12 point flange, 3/8 NC x 3-3/4 inch, grade 8
23 H233445 1 KEY – pump shaft
1 1326602C1 1 SHAFT – center (15.0 foot)
1 1326838C1 1 SHAFT – center (16.5 foot)
1 1316273C1 1 SHAFT – center (17.5 foot)
1 1316274C1 1 SHAFT – center (20.0 foot)
1 1316275C1 1 SHAFT – center (22.5 foot)
1 1316276C1 1 SHAFT – center (25.0 foot)
1 1316277C1 1 SHAFT – center (30.0 foot)
7 114938A1 1 HOUSING – eccentric roller, left-hand
8 167666C1 4 BUSHING – roller frame
12 114951A1 12 CUP – tapered roller bearing (Female thread)
13 114952A1 12 CONE – tapered roller bearing (Male thread)
20 219-3 2 FITTING – grease, straight, 1/8 PT x 1-1/4 inch
21 175571A2 1 HOUSING – eccentric roller, right-hand
22 114940A1 2 SHIELD – eccentric
23 614-8020 12 BOLT – hex, full threads, 8 – 1.25 x 20 mm
24 892-11008 12 WASHER, LOCK, M8
25 829-1408 12 NUT – hex, 8 mm – 1.25, class 10
26 167661C1 2 RING – control
30 114941A1 6 BEARING – roller, ref 30: 114941a1 BOLT IS NSS. IS MADE INTO ROLLER BEARING. (m10 x
31 114942A1 12 BOLT – socket head, shoulder, special
32 832-46412 12 NUT – self-locking, 12 mm – 1.75
36 832-46410 6 NUT – self-locking, 10 mm – 1.5
37 129996A1 1 SUPPORT – reel, left-hand
38 129997A1 1 SUPPORT – reel, right-hand
40 23885K 4 SPACER – 3/4 x 2-1/16 inch
43 814-12090 2 BOLT – hex, 12 – 1.75 x 90 mm
44 832-46412 4 NUT – self-locking, 12 mm – 1.75
45 1316328C1 4 BUSHING – reel support
47 185519C1 1 SHAFT – driving end (15.0, 16.5 and 17.5 foot)
47 185520C1 1 SHAFT – driving end (20.0 and 22.5 foot)
47 180134C1 1 SHAFT – driving end (25.0 and 30.0 foot)
48 185522C1 1 SHAFT – driven end (15.0, 16.5 and 17.5 foot)
48 185523C1 1 SHAFT – driven end (20.0 and 22.5 Foot)
48 180135C1 1 SHAFT – driven end (25.0 and 30.0 foot)
49 495-81089 4 WASHER – flat, 1-21/32 x 2-1/4 x 7/64 inch
50 114943A1 1 COLLAR – locking, Includes: Ref. 51
51 878-1106 2 SCREW – set, hex socket headless cup point, 3/8 NF x 5/16 inch
55 434-616 6 BOLT – carriage, 3/8 NC x 1 inch
56 113-2663 1 BOLT – hex, full threads, 1/2 NC x 3 inch
57 425-108 1 NUT – hex, 1/2 inch NC
58 135113A1 1 PLATE – support, outer
59 814-12080 2 Bolt, Hex, M12 x 80, 8.8
60 811-12040 2 BOLT, CARRIAGE, M12 x 40, Cl8.8, Full Thd
61 829-1412 2 NUT – hex, 12 mm – 1.75, class 10
62 114944A1 2 WASHER – Belleville, 12 mm
1 1326605C91 12 BAT ASSEMBLY – with steel tines (15.0 foot), Includes: Ref. 13 – 15
2 1316258C91 6 BAT ASSEMBLY – with steel tines (17.5 foot), Includes: Ref. 13 – 15
3 1316259C91 12 BAT ASSEMBLY – with steel tines (17.5 foot), Includes: Ref. 13 – 15
4 1316259C91 6 BAT ASSEMBLY – with steel tines (16.5 and 20.0 foot), Includes: Ref. 13 – 15
5 1316260C91 12 BAT ASSEMBLY – with steel tines (20.0 foot), Includes: Ref. 13 – 15
6 1316265C91 6 BAT ASSEMBLY – with steel tines (22.5 foot), Includes: Ref. 13 – 15
7 185864C91 12 BAT ASSEMBLY – with steel tines (22.5 foot), Includes: Ref. 13 – 15
8 598170R91 12 BAT ASSEMBLY – with steel tines (25.0 foot), Includes: Ref. 13 – 15
9 167676C91 12 BAT ASSEMBLY – with steel tines (25.0 foot), Includes: Ref. 13 – 15
10 1316264C91 12 BAT ASSEMBLY – with steel tines (30.0 foot), Includes: Ref. 13 – 15
11 1316265C91 12 BAT ASSEMBLY – with steel tines (30.0 foot), Includes: Ref. 13 – 15
12 598188R91 12 BAT ASSEMBLY – with steel tines (16.5 foot), Includes: Ref. 13 – 15
18 1326604C1 6 SHAFT – bat (15.0 foot)
18 1326842C1 6 SHAFT – bat (16.5 foot)
18 1316267C1 6 SHAFT – bat (17.5 foot)
18 1316268C1 6 SHAFT – bat (20.0 foot)
18 1316269C1 6 SHAFT – bat (22.5 foot)
18 1316270C1 6 SHAFT – bat (25.0 foot)
18 1316271C1 6 SHAFT – bat (30.0 foot)
19 1316568C1 12 BUSHING – (52 inch reel)
20 413-832 12 BOLT – hex, 1/2 NC x 2 inch (52 inch reel)
21 495-81024 12 WASHER – flat, 17/32 x 1-1/4 x 1/16 inch (52 inch reel)
24 231-4118 12 NUT – hex, self-locking, 1/2 inch NC (52 inch reel)
1 1989399C1 1 SHAFT – center tube (15.0 foot)
1 1989400C1 1 SHAFT – center tube (16.5 foot)
1 1989401C1 1 SHAFT – center tube (17.5 foot)
1 1994811C1 1 SHAFT – center tube (20.0 foot)
7 114938A1 1 HOUSING – eccentric roller, left-hand
8 167666C1 2 BUSHING – roller frame
16 811-12040 1 BOLT, CARRIAGE, M12 x 40, Cl8.8, Full Thd
17 829-1412 1 NUT – hex, 12 mm – 1.75, class 10
19 114944A1 1 WASHER – belleville, 12 mm
20 219-3 1 FITTING – grease, straight, 1/8 PT x 1-1/4 inch
21 1989433C2 6 SHIELD – end
22 114940A1 1 SHIELD – eccentric
23 614-8020 6 BOLT – hex, full threads, 8 – 1.25 x 20 mm
24 892-11008 6 WASHER, LOCK, M8
25 829-1408 6 NUT – hex, 8 mm – 1.25, class 10
26 167661C1 1 RING – control
27 114951A1 6 CUP – tapered roller bearing (Female thread)
28 114952A1 6 CONE – tapered roller bearing (Male thread)
30 114941A1 3 BEARING – roller
33 114942A1 6 BOLT – socket head, shoulder, special
34 832-46412 6 NUT – self-locking, 12 mm – 1.75
36 832-46410 3 NUT – self-locking, 10 mm – 1.5
37 129996A1 1 SUPPORT – reel, left-hand
38 175674A2 1 SUPPORT – reel, right-hand
39 135113A1 1 PLATE – support, outer
40 23885K 4 SPACER – 3/4 x 2-1/16 inch
43 814-12080 4 Bolt, Hex, M12 x 80, 8.8
44 832-46412 4 NUT – self-locking, 12 mm – 1.75
45 1316328C1 4 BUSHING – reel support
47 1989426C1 1 SHAFT – drive end
48 1989424C1 1 SHAFT – driven end
49 495-81089 4 WASHER – flat, 1-21/32 x 2-1/4 x 7/64 inch
50 114943A1 1 COLLAR – locking, Includes: Ref. 51
51 878-1106 2 SCREW – set, hex socket headless cup point, 3/8 NF x 5/16 inch
61 167666C1 2 BUSHING – roller frame
65 219-3 1 FITTING – grease, straight, 1/8 PT x 1-1/4 inch
71 614-10030 8 BOLT – hex, full threads, 10 – 1.5 x 30 mm
77 113-2663 1 BOLT – hex, full threads, 1/2 NC x 3 inch
78 425-108 1 NUT – hex, 1/2 inch NC
1 1347091C1 1 SHAFT – center, tube (22.5 foot)
1 1347092C1 1 SHAFT – center, tube (25.0 foot)
1 1347093C1 1 SHAFT – center, tube (30.0 foot)
7 114938A1 1 HOUSING – eccentric roller, left-hand
8 167666C1 4 BUSHING – roller frame
9 175571A2 1 HOUSING – eccentric roller, right-hand
16 811-12040 2 BOLT, CARRIAGE, M12 x 40, Cl8.8, Full Thd
17 829-1412 2 NUT – hex, 12 mm – 1.75, class 10
19 114944A1 2 WASHER – belleville, 12 mm
20 219-3 2 FITTING – grease, straight, 1/8 PT x 1-1/4 inch
22 114940A1 2 SHIELD – eccentric
23 614-8020 12 BOLT – hex, full threads, 8 – 1.25 x 20 mm
24 892-11008 12 WASHER, LOCK, M8
25 829-1408 12 NUT – hex, 8 mm – 1.25, class 10
26 167661C1 2 RING – control
27 114951A1 12 CUP – tapered roller bearing (Female thread)
28 114952A1 12 CONE – tapered roller bearing (Male thread)
30 114941A1 6 BEARING – roller
33 114942A1 12 BOLT – socket head, shoulder, special
34 832-46412 12 NUT – self-locking, 12 mm – 1.75, 12 mm
36 832-46410 6 NUT – self-locking, 10 mm – 1.5, 10mm
37 129996A1 1 SUPPORT – reel, left-hand
38 129997A1 1 SUPPORT – reel, right-hand
39 135113A1 1 PLATE – support, outer
40 23885K 4 SPACER – 3/4 x 2-1/16 inch
43 814-12080 4 Bolt, Hex, M12 x 80, 8.8
44 832-46412 4 NUT – self-locking, 12 mm – 1.75
45 1316328C1 4 BUSHING – reel support
47 1989428C1 1 SHAFT – drive end
48 1989425C1 1 SHAFT – driven end
49 495-81089 4 WASHER – flat, 1-21/32 x 2-1/4 x 7/64 inch
50 114943A1 1 COLLAR – locking, Includes: Ref. 51
51 878-1106 2 SCREW – set, hex socket headless cup point, 3/8 NF x 5/16 inch
71 614-10030 8 BOLT – hex, full threads, 10 – 1.5 x 30 mm
77 113-2663 1 BOLT – hex, full threads, 1/2 NC x 3 inch
78 425-108 1 NUT – hex, 1/2 inch NC
1 1989429C1 6 TUBE – tine support (15.0 foot)
1 1989430C1 6 TUBE – tine support (16.5 foot)
1 1989431C1 6 TUBE – tine support (17.5 foot)
1 1994813C1 6 TUBE – tine support (20.0 foot)
1 1347080C1 6 TUBE – tine support (22.5 foot)
1 1347081C1 6 TUBE – tine support (25.0 foot)
1 1347082C2 6 TUBE – tine support (30.0 foot)
2 1347094C1 6 BRACKET – crank arm, left-hand
3 1347095C1 6 BRACKET – crank arm, right-hand (Double eccentric)
8 126173A1 6 SCREW – hex washer head, slotted tap, special, 3.5 x 1.3 x 16 mm
10 126173A1 6 SCREW – hex washer head, slotted tap, special, 3.5 x 1.3 x 16 mm
12 126173A1 6 SCREW – hex washer head, slotted tap, special, 3.5 x 1.3 x 16 mm
14 126173A1 10 SCREW – hex washer head, slotted tap, special, 3.5 x 1.3 x 16 mm
1 592627R21 1 STRAP – finger
2 167652C1 1 TINE – left-hand
4 592627R21 1 STRAP – finger
5 167651C1 1 TINE – right-hand
6 598246R1 12 SPACER – 9/16 ID x 1-1/4 inch
7 827385C1 12 BOLT – round head hex shank, special, 1/2 NF x 2-1/2 inch
8 827386C1 12 NUT – hex flange, self-locking, 1/2 inch NF
1 827385C1 12 BOLT – round head hex shank, special, 1/2 NF x 2-1/2 inch
2 598246R1 12 SPACER – 9/16 ID x 1-1/4 inch
3 1970591C1 12 RETAINER – auxiliary tine
4 1970590C1 12 TINE – plastic, auxiliary
5 1970592C1 12 SUPPORT – auxiliary tine
6 827386C1 12 NUT – hex flange, self-locking, 1/2 inch NF
2 413-828 2 BOLT – hex, 1/2 NC x 1-3/4 inch
3 129-857 2 NUT – heavy square, 1/2 inch NC, grade 2
4 396-21053 2 WASHER – flat, 17/32 x 1-1/16 x 1/8 inch, hardened
5 1308371C1 1 SHIM – bar
6 129973A2 1 SPROCKET – driven, 51 tooth
7 432-616 2 3/32″ x 1″
8 27-7278 2 PIN – clevis, 7/16 x 2-25/32 inch, hardened
10 129967A1 1 SPROCKET – drive, 17 tooth
11 484-1386 2 SCREW – set, hex socket headless, 3/8 NF x 3/8 inch, cup point
12 126-124 1 Woodruff Key, #15, 1/4″ x 1″, HT
17 113-2663 1 BOLT – hex, full threads, 1/2 NC x 3 inch
18 425-108 1 NUT – hex, 1/2 inch NC
19 80679 2 Washer, Lock, 1/2″
1 140216A2 1 SUPPORT – reel drive shield
2 439-1428 2 PIN – headed, 1/4 x 1-3/4 inch, grade 2
3 432-612 2 PIN , SPLIT (COTTER), 3/32″ x 3/4″
4 140218A3 1 SHIELD – reel drive (Replaces 140215A2), Includes: Ref. 5, THE PARTS NOTES STATES: MUST
5 144385A1 1 DECAL – Warning, shields are provided to guard
6 465593R1 1 SPACER – mounting
7 413-552 1 BOLT – hex, 5/16 NC x 3-1/4 inch
8 231-5145 1 NUT – hex serrated flange, 5/16 inch NC
1 1308352C3 2 ARM – support
4 128428A2 2 SUPPORT – arm
5 413-848 4 BOLT – hex, 1/2 NC x 3 inch
6 231-4118 4 NUT – hex, self-locking, 1/2 inch NC
7 439-5848 2 PIN – headed, 1/2 x 3 inch
8 432-1216 2 3/16″ x 1″
9 1320928C1 2 ROD – stand support
13 495-11034 2 WASHER – flat, 11/32 x 11/16 x 1/16 inch
14 432-812 2 PIN, SPLIT (COTTER), 1/8″ x 3/4″
15 1305175C3 2 BRACKET – reflector
20 432-1216 2 3/16″ x 1″
23 439-5848 2 PIN – headed, 1/2 x 3 inch
24 413-812 2 BOLT – hex, 1/2 NC x 3/4 inch
25 1320927C2 2 ROD – cylinder adjusting
26 480523R1 2 PIN – hair, cotter
27 396-11066 2 WASHER – flat, 21/32 x 1-5/16 x 3/32 inch, hardened
28 1316193C1 2 PLUG – button
29 128729A1 2 TUBE – reel arm adjusting
30 144672A2 1 SUPPORT – lift cylinder, left-hand, with decal
30 144673A2 1 SUPPORT – lift cylinder, right-hand, with decal
31 185067A1 1 DECAL – Warning, avoid injury, always lock both reel lift cylinders
32 128427A1 2 SPACER – reel arm
33 413-1272 2 BOLT – hex, 3/4 NC x 4-1/2 inch
34 231-41112 2 NUT – hex, self-locking, 3/4 inch NC
35 496-21081 2 WASHER, 13/16″ x 1 1/2″ x .179″, HDN
36 128426A1 2 SPACER – support
37 413-1028 2 BOLT – hex, 5/8 NC x 1-3/4 inch
38 231-41110 2 NUT – hex, self-locking, 5/8 inch NC
39 496-41066 2 WASHER, 21/32″ x 1 1/2″ x .188″, HDN
1 1316318C2 1 SUPPORT – front, right-hand cylinder
2 413-852 2 BOLT – hex, 1/2 NC x 3-1/4 inch
3 231-4118 4 NUT – hex, self-locking, 1/2 inch NC
5 413-848 2 BOLT – hex, 1/2 NC x 3 inch
6 1316332C2 1 SUPPORT – rear, left-hand cylinder
8 439-5628 2 PIN – headed, 3/8 x 1-3/4 inch
9 439-1636 2 PIN – headed, 3/8 x 2-1/4 inch, grade 2
10 432-812 4 PIN, SPLIT (COTTER), 1/8″ x 3/4″
1 129986A1 2 SUPPORT – reel adjusting
3 413-848 4 BOLT – hex, 1/2 NC x 3 inch
4 231-4118 4 NUT – hex, self-locking, 1/2 inch NC
5 129983A1 2 CRANK – reel adjusting
6 495-21081 2 WASHER – flat, 13/16 x 2 x 9/64 inch
7 432-1020 2 5/32″ x 1 1/4″
1 189459C3 1 SHIELD – pump drive, 1440E Combine with 47 inch feeder., 1460E Combine with 47 inch feeder.
1 189460C3 1 SHIELD – pump drive, 1460E Combine with 54.5 inch feeder., 1480E Combine with 54.5 inch feeder.
2 189470C1 1 SUPPORT – shield, upper
6 197646C1 1 SHIELD – feeder jackshaft, 1460E Combine with 47 inch feeder., 1440E Combine with 47 inch feeder.
6 189730C1 1 SHIELD – feeder jackshaft, 1460E Combine with 54.5 inch feeder., 1480E Combine with 54.5 inch
7 179253C1 1 SHIELD – feeder jackshaft, 1480E Combine with 54.5 inch feeder., 1460E Combine with 54.5 inch
9 477-82508 4 BOLT – serrated slotted truss head, 1/4 NC x 1/2 inch
10 231-5144 4 NUT, Flg, USR, 1/4″-20
13 203672C1 1 SUPPORT – shield, lower, 1480E Combine with 54.5 inch feeder.
14 189468C2 1 SUPPORT – shield, lower rear, 1460E Combine with 47 inch feeder., 1440E Combine with 47 inch
15 189469C1 1 SUPPORT – shield, lower rear, 1460E Combine with 54.5 inch feeder., 1480E Combine with 54.5 inch
16 189464C2 1 SUPPORT – shield, upper front
21 189466C1 1 SUPPORT – shield, upper rear
23 198409C2 1 SUPPORT – reel drive pump
28 176562C2 1 PULLEY – drive, feeder jackshaft pump, 13-1/2 inch OD
29 Q1497 1 KEY – square gib, 3/8 x 2 inch
30 197414C2 1 BELT – reel drive, 146 inch, 1480E Combine with 54.5 inch feeder., 1460E Combine with 54.5 inch
30 197411C1 1 BELT – reel drive, 132 inch, 1460E Combine with 47 inch feeder., 1440E Combine with 47 inch feeder.
31 195528C92 1 ARM ASSEMBLY – pump tightener, Includes: Ref. 32
32 583346R1 2 BUSHING – tightener arm
33 219-87 1 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap
34 198410C1 1 SPACER – tightener arm
35 413-1064 1 BOLT – hex, 5/8 NC x 4 inch
36 495-81026 1 WASHER – flat, 21/32 x 1-1/2 x 3/64 inch
37 495-81069 1 WASHER – flat, 1-1/32 x 1-1/2 x 1/16 inch
38 495-81070 1 WASHER – flat, 1-1/32 x 1-1/2 x 7/64 inch
39 231-51410 1 NUT, Flg, USR, 5/8″-11
42 674966R91 1 PULLEY – belt idler, 8-3/4 inch OD
43 424-1080 1 BOLT – hex, 5/8 NC x 5 inch, grade 2
44 495-81175 1 WASHER – flat, 21/32 x 1 x 7/64 inch
45 492-11062 1 WASHER, LOCK, 5/8″
46 425-1010 1 NUT, 5/8″-11, G5
47 193252C1 1 PULLEY ASSY, pump driven, 7.5″ O.D., 7/8″ I.D.
52 195526C1 1 SUPPORT – pivot anchor, 1440E Combine with 47 inch feeder., 1460E Combine with 47 inch feeder.
52 195527C1 1 SUPPORT – pivot anchor, 1480E Combine with 54.5 inch feeder.
57 195531C1 1 SUPPORT – spring anchor
60 167570C1 1 CHAIN – latch, reel drive idler pulley arm
61 413-416 1 BOLT – hex, 1/4 NC x 1 inch
62 495-11028 2 WASHER – flat, 9/32 x 5/8 x 1/16 inch
63 492-11025 1 WASHER, LOCK, 1/4″
64 425-104 1 NUT – hex, 1/4 inch NC
1 195528C92 1 ARM ASSEMBLY – pump tightener, Includes: Ref. 2
2 583346R1 2 BUSHING – tightener arm
3 219-87 1 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap
4 674966R91 1 PULLEY – belt idler, 8-3/4 inch OD
5 413-1080 1 BOLT – hex, 5/8 NC x 5 inch
6 495-81175 1 WASHER – flat, 21/32 x 1 x 7/64 inch
7 492-11062 1 WASHER, LOCK, 5/8″
8 425-1010 2 NUT, 5/8″-11, G5
12 193252C1 1 PULLEY ASSY, pump driven, 7.5″ O.D., 7/8″ I.D.
13 485-13812 2 SCREW – set, square head, 3/8 NC x 3/4 inch, cup point
14 425-146 2 NUT – hex, jam, 3/8 inch NC
16 409-7512 2 BOLT – hex serrated flange, 5/16 NC x 3/4 inch
17 413-522 2 BOLT – hex, 5/16 NC x 1-3/8 inch
18 492-11031 2 WASHER, LOCK, 5/16″
19 231-5145 2 NUT – hex serrated flange, 5/16 inch NC
20 425-105 2 NUT – hex, 5/16 inch NC
23 1301176C1 1 SWITCH – rocker
2 1307412C1 1 BAR – cutter (15.0 foot)
2 1326813C1 1 BAR – cutter (16.5 foot)
2 1307413C1 1 BAR – cutter (17.5 foot)
2 1307414C1 1 BAR – cutter (20.0 foot)
2 1307415C1 1 BAR – cutter (22.5 foot)
2 1307416C1 1 BAR – cutter (25.0 foot)
2 1307417C1 1 BAR – cutter (30.0 foot)
7 434-740 2 BOLT – carriage, 7/16 NC x 2-1/2 inch
14 326-1036 2 BOLT, Hex, 5/8″-11 x 2 1/4″, G8
15 396-21066 2 WASHER – flat, 21/32 x 1-5/16 x 5/32 inch, hardened
16 433-732 2 BOLT – carriage, 7/16 NC x 2 inch, , grade 5
18 1316688C4 1 SUPPORT – crop deflector, right-hand
23 100999A1 1 GUARD – 2 point, left-hand (15.0, 20.0, 25.0 and 30.0 foot)
24 101000A1 1 GUARD – 2 point, right-hand (15.0, 20.0, 25.0 and 30.0 foot)
27 495-81287 1 WASHER – flat, 17/32 x 1-1/4 x 7/64 inch
28 1957435C3 1 SUPPORT – crop deflector, left-hand
2 1307412C1 1 BAR – cutter (15.0 foot)
2 1326813C1 1 BAR – cutter (16.5 foot)
2 1307413C1 1 BAR – cutter (17.5 foot)
2 1307414C1 1 BAR – cutter (20.0 foot)
2 1307415C1 1 BAR – cutter (22.5 foot)
2 1307416C1 1 BAR – cutter (25.0 foot)
2 1307417C1 1 BAR – cutter (30.0 foot)
5 1338269C1 2 GUARD – stub (15.0, 20.0, 25.0 and 30.0 foot)
6 1326787C2 3 GUARD – double, left
13 326-1036 2 BOLT, Hex, 5/8″-11 x 2 1/4″, G8
14 396-21066 2 WASHER – flat, 21/32 x 1-5/16 x 5/32 inch, hardened
22 1326342C3 1 SUPPORT – crop deflector
23 434-732 2 BOLT – carriage, 7/16 NC x 2 inch
24 231-4117 2 NUT – hex, self-locking, 7/16 inch NC
25 495-81287 1 WASHER – flat, 17/32 x 1-1/4 x 7/64 inch
1 1970400C5 1 KNIFE ASSEMBLY – 20 foot, Includes: Ref. 2 – 16
3 1313795C94 1 HEAD ASSEMBLY – knife, Includes: Ref. 4
4 1345491C2 1 COVER – dust
5 425-1310 1 NUT – hex, slotted, 5/8 inch NF
7 432-824 1 1/8″ x 1-1/2″
8 1313797C1 1 BLOCK – knife head
9 219-93 1 FITTING – grease, 90 degree, 1/4-28 special taper x 3/4 inch, if used
9 219-87 1 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap , If used
13 1970506C1 16 BOLT – round head oval neck, special, No. 12 NC x 1-1/8 inch, Grade 8
14 1954816C1 16 NUT – hex, self-locking, special, No. 12 NC
17 413-636 1 BOLT – hex, 3/8 NC x 2-1/4 inch, for spare knife
18 495-21044 1 WASHER – flat, 7/16 x 1 x 5/64 inch, for spare knife
19 231-5146 1 NUT, Flg, USR, 3/8″-16, For spare knife
1 1307281C98 1 KNIFE ASSEMBLY – 15.0 foot, Includes: Ref. 2 – 17
1 1326835C8 1 KNIFE ASSEMBLY – 16.5 foot, Includes: Ref. 2 – 17
1 1307282C98 1 KNIFE ASSEMBLY – 17.5 foot, Includes: Ref. 2 – 17
1 1307283C98 1 KNIFE ASSEMBLY – 20.0 foot, Includes: Ref. 2 – 17
1 1307284C98 1 KNIFE ASSEMBLY – 22.5 foot, Includes: Ref. 2 – 17
1 1307285C98 1 KNIFE ASSEMBLY – 25.0 foot, Includes: Ref. 2 – 17
1 1307286C98 1 KNIFE ASSEMBLY – 30.0 foot, Includes: Ref. 2 – 17
3 1316161C94 1 HEAD ASSEMBLY – knife, Includes: Ref. 4
4 1345491C2 1 COVER – dust
5 425-1310 1 NUT – hex, slotted, 5/8 inch NF
7 432-824 1 1/8″ x 1-1/2″
10 1313797C1 1 BLOCK – knife head
11 219-93 1 FITTING – grease, 90 degree, 1/4-28 special taper x 3/4 inch, if used
11 219-87 1 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap , If used
13 148200C1 1 SECTION – knife, 3 inch, right-hand end
14 1316030C2 1 SECTION – knife, 3 inch, plain half
15 1979166C1 16 BOLT – truss head ribbed neck, special, No. 12 NC x 1-1/8 inch
18 227455A1 1 STRAP – knife back reinforcement, if used, Part of Knife Back Reinforcement Kit, P/N 227213A1
19 227456A1 3 SCREW – machine, socket head, special, No.12 NC x 1-1/4 inch, Part of Knife Back Reinforcement Kit
20 227457A1 6 SCREW – machine, socket head, special, No. 12 NC x 13/16 inch, Part of Knife Back Reinforcement
21 1954816C1 9 NUT – hex, self-locking, special, No. 12 NC, Part of Knife Back Reinforcement Kit, P/N 227213A1
22 413-636 1 BOLT – hex, 3/8 NC x 2-1/4 inch, for spare knife
23 495-21044 1 WASHER – flat, 7/16 x 1 x 5/64 inch, for spare knife
24 231-5146 1 NUT, Flg, USR, 3/8″-16, For spare knife
1 125957A1 1 PULLEY – drive, 400 RPM, 213 mm OD (Standard on 1.5 inch knife)
1 126012A1 1 PULLEY – drive, 460 RPM, 245 mm OD (Optional on 1.5 inch knife only)
1 125959A1 1 PULLEY – drive, 500 RPM, 267 mm OD (Standard on 3 inch knife and optional on 1.5 inch knife)
1 125962A1 1 PULLEY – drive, 600 RPM, 318 mm OD (Optional on 3 inch knife only)
2 133587A1 4 BOLT – hex flange, self-locking, special, 3/8 NC x 3/4 inch
3 125966A1 1 HUB – knife drive pulley
4 413-832 2 BOLT – hex, 1/2 NC x 2 inch
5 425-108 2 NUT – hex, 1/2 inch NC
6 1989679C1 1 BELT – drive, 105 inch (Used with 400 RPM drive)
6 1319245C2 1 BELT – drive, 108-1/4 inch (Used with 460 and 500 RPM drive)
6 1316575C2 1 BELT – drive, 111-7/8 inch, drive, (Used with 600 RPM drive)
7 138435A1 1 SUPPORT – stationary idler pulley
8 409-7816 3 BOLT – hex serrated flange, 1/2 NC x 1 inch
9 231-5148 3 NUT, Flg, USR, 1/2″-13
10 518926R1 1 SPRING – knife drive idler, REF 10 Spring, IF looking for one that drives at both ends and has an
11 495-11066 1 WASHER – flat, 21/32 x 1-5/16 x 3/32 inch
12 178858A1 1 TUBE – tightener spring, Ref 12: Another tube not shown? Per tech: Ref. 42, idler spacer, 188861A1.
13 1307259C2 1 GUIDE – finger, tightener bolt
14 138439A1 1 ARM ASSEMBLY – idler, Includes: Ref. 15 & 16
15 289588R1 2 BUSHING – shield pivot support
16 219-87 1 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap
20 1320826C1 1 BUSHING – idler arm
21 413-860 1 BOLT – hex, 1/2 NC x 3-3/4 inch
22 232-5318 1 NUT – hex flange, self-locking, 1/2 inch NC
23 673214R91 1 PULLEY – 7-5/16 inch (186 mm) OD, idler, front
24 413-1040 1 BOLT – hex, 5/8 NC x 2-1/2 inch
25 425-1010 1 NUT, 5/8″-11, G5
26 492-11062 1 WASHER, LOCK, 5/8″
27 575098R1 1 SPACER – 7/8 x 5/8 inch, tube
28 1338456C1 1 PULLEY – idler, 6 inch OD, rear
29 413-840 1 BOLT – hex, 1/2 NC x 2-1/2 inch
30 232-5318 1 NUT – hex flange, self-locking, 1/2 inch NC
31 495-81287 5 WASHER – flat, 17/32 x 1-1/4 x 7/64 inch
32 1307324C1 1 BOLT – eye, knife drive tightener
33 495-81287 1 WASHER – flat, 17/32 x 1-1/4 x 7/64 inch
34 425-108 3 NUT – hex, 1/2 inch NC
35 439-1824 1 PIN – headed, 1/2 x 1-1/2 inch, grade 2
36 432-1216 1 3/16″ x 1″
37 495-81287 1 WASHER – flat, 17/32 x 1-1/4 x 7/64 inch
39 326-1032 4 BOLT, Hex, 5/8″-11 x 2″, G8
40 326-1056 1 BOLT, Hex, 5/8″-11 x 3 1/2″, G8
41 232-53110 5 NUT – hex flange, self-locking, 5/8 inch NC
42 188861A1 1 SPACER – 5 inch, idler spring, inner
1 133157A2 1 BOX ASSEMBLY – knife drive, Includes: Ref. 2 – 34
2 182581A1 1 SHAFT – wobble
3 130820A1 1 HOUSING ASSEMBLY – knife box, Includes: Ref. 4 & 5
4 140436A1 1 BEARING – needle
5 544667R91 1 SEAL – oil
6 217-407 1 PLUG, Hex Hd, 3/8″-18
7 219-436 1 BREATHER – straight, 3/8 PT x 1-1/2 inch, housing
8 62520C2 1 TRUNNION – wobble shaft
9 364463C91 2 CONE – tapered roller bearing
10 364462C1 2 CUP – tapered roller bearing
11 133466A1 1 NUT – bearing lock, special
12 38-32024 2 Pin, 5/16″ x 1 1/2″, Coiled
13 182580A1 1 YOKE – trunnion, wobble shaft
14 A12652 2 BEARING – needle
15 141162A1 2 STUD – trunnion
16 128962A1 1 SUPPORT ASSEMBLY – wobble box, Includes: Ref. 17 – 19
17 101295C1 1 SEAL – oil
18 205369R91 1 BEARING – needle
19 166957R91 1 BEARING – needle
20 238-5231 1 O-RING, -231, 70 Duro, 2.609″ ID x .139″ Thk
21 136322C1 4 BOLT – hex dry lock, special, 5/8 NC x 2-1/4 inch, grade 8
22 492-11062 4 WASHER, LOCK, 5/8″
23 62526C1 1 COVER – knife drive box
24 F60368 1 BEARING – needle
25 62527C1 1 SEAL – oil
26 117045C1 8 BOLT – hex, special, 3/8 NC x 1 inch
27 62525C2 1 GASKET – cover
28 116955C1 1 GASKET – felt
29 126314A2 1 ARM – crank
30 116954C1 1 WASHER – flat, special, 5/32 x 2-13/32 x 5/16 inch
31 413-1224 1 BOLT – hex, 3/4 NC x 1-1/2 inch
32 138775A1 1 PULLEY – driven, knife
34 414089C1 1 NUT – hex flange, special, 5/8 inch NF, grade 8
1 1316510C1 1 SUPPORT – shield, upper rear
2 477-73112 3 BOLT – serrated slotted truss head, 5/16 NC x 3/4 inch
3 231-5145 3 NUT – hex serrated flange, 5/16 inch NC
4 1326758C1 1 SUPPORT – shield, upper front
10 409-7612 2 BOLT – hex serrated flange, 3/8 NC x 3/4 inch
13 1316693C3 1 SHIELD – knife drive
14 1326386C1 1 SUPPORT – shield, lower rear
15 409-7612 2 BOLT – hex serrated flange, 3/8 NC x 3/4 inch
16 231-5146 4 NUT, Flg, USR, 3/8″-16
17 188103C1 1 BRACKET – hood anchor
18 494307C1 1 HOOK – hold down, latch
19 439-1424 1 PIN, HEADED, 1/4″ x 1 1/2″, G2
20 432-816 1 1/8″ x 1″
21 L105124 1 HOOK – latch
22 70-1108 2 SCREW – machine, pan head slotted, No. 10 NC x 1/2 inch
23 495-81101 2 WASHER – flat, 7/32 x 3/4 x 1/16 inch
24 231-51409 2 NUT, Flg, USR, #10-24
25 1326408C2 2 STUD – fastener, shield
26 1326407C1 4 RETAINER – shield stud
33 131988A1 1 BRACKET – shield, front
35 231-5146 2 NUT, Flg, USR, 3/8″-16
37 126396A1 1 CABLE – shield anchor
34 477-73816 2 BOLT – serrated slotted truss head, 3/8 NC x 1 inch
1 156816C91 2 BEARING – ball, jackshaft
2 180955C1 4 FLANGE – bearing
3 434-616 6 BOLT – carriage, 3/8 NC x 1 inch
5 231-5146 6 NUT, Flg, USR, 3/8″-16
6 1320892C1 1 SUPPORT – jackshaft
7 183-123 2 SCREW – thumb with shoulder, 5/16 NC x 3/4 inch
8 488837C1 2 NUT – speed, 5/16 inch
10 154273C1 4 BOLT – hex, self-locking, special, 3/8 NC x 1 inch
11 231-5146 4 NUT, Flg, USR, 3/8″-16
14 125969A1 1 BAR – jackshaft
20 1326597C1 1 SHIELD – clutch
40 138005A1 1 HANGER – drive line
41 425-108 2 NUT – hex, 1/2 inch NC
42 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
45 225265R1 1 CLAMP – jackshaft
46 413-840 1 BOLT – hex, 1/2 NC x 2-1/2 inch
47 231-4118 1 NUT – hex, self-locking, 1/2 inch NC
49 138653A1 1 SUPPORT – knife drive
1 156816C91 2 BEARING – ball, jackshaft
2 180955C1 4 FLANGE – bearing
3 434-616 3 BOLT – carriage, 3/8 NC x 1 inch
4 434-620 3 BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/4″, G5, Full Thd
5 231-5146 8 NUT, Flg, USR, 3/8″-16
7 1307339C1 1 SUPPORT – jackshaft
8 409-7512 2 BOLT – hex serrated flange, 5/16 NC x 3/4 inch
9 231-5145 2 NUT – hex serrated flange, 5/16 inch NC
12 434-816 1 BOLT – carriage, 1/2 NC x 1 inch
13 231-5148 1 NUT, Flg, USR, 1/2″-13
15 125970A1 1 BAR – jackshaft (17.5 foot)
15 125971A1 1 BAR – jackshaft (20.0 foot)
16 138653A1 1 SUPPORT – knife drive
18 125982A1 1 TUBE – jackshaft shield (17.5 foot)
18 125983A1 1 TUBE – jackshaft shield (20.0 foot)
19 282-1448 1 SCREW – self tapping, No. 8-18 x 1 inch
21 409-7620 1 BOLT – hex serrated flange, 3/8 NC x 1-1/4 inch
22 409-7616 3 BOLT – hex serrated flange, 3/8 NC x 1 inch
23 231-5146 4 NUT, Flg, USR, 3/8″-16
27 125992A1 1 SHIELD – jackshaft
34 138005A1 1 HANGER – drive line
35 425-108 2 NUT – hex, 1/2 inch NC
36 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
45 225265R1 1 CLAMP – jackshaft
46 413-840 1 BOLT – hex, 1/2 NC x 2-1/2 inch
47 231-4118 1 NUT – hex, self-locking, 1/2 inch NC
1 156816C91 2 BEARING – ball, jackshaft
2 180955C1 4 FLANGE – bearing
3 434-616 6 BOLT – carriage, 3/8 NC x 1 inch
5 231-5146 6 NUT, Flg, USR, 3/8″-16
15 125972A1 1 BAR – jackshaft, 22.5 foot
15 125973A1 1 BAR – jackshaft, 25.0 foot
16 138653A1 1 SUPPORT – knife drive
18 125989A1 1 TUBE – jackshaft shield, 22.5 foot replaces 125984A1
18 178164A1 1 TUBE – jackshaft shield, 25.0 foot
21 409-7620 1 BOLT – hex serrated flange, 3/8 NC x 1-1/4 inch
22 409-7616 3 BOLT – hex serrated flange, 3/8 NC x 1 inch
23 231-5146 4 NUT, Flg, USR, 3/8″-16
24 125992A1 1 SHIELD – jackshaft
25 282-1448 1 SCREW – self tapping, No. 8-18 x 1 inch
26 409-7512 2 BOLT – hex serrated flange, 5/16 NC x 3/4 inch
27 231-5145 2 NUT – hex serrated flange, 5/16 inch NC
34 138005A1 1 HANGER – drive line
35 425-108 2 NUT – hex, 1/2 inch NC
36 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
45 225265R1 1 CLAMP – jackshaft
46 413-840 1 BOLT – hex, 1/2 NC x 2-1/2 inch
47 231-4118 1 NUT – hex, self-locking, 1/2 inch NC
1 156816C91 3 BEARING – ball, jackshaft
2 180955C1 6 FLANGE – bearing
3 434-616 6 BOLT – carriage, 3/8 NC x 1 inch
4 434-620 3 BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/4″, G5, Full Thd
5 231-5146 9 NUT, Flg, USR, 3/8″-16
7 1307339C1 1 SUPPORT – jackshaft
8 409-7512 5 BOLT – hex serrated flange, 5/16 NC x 3/4 inch
9 231-5145 5 NUT – hex serrated flange, 5/16 inch NC
12 434-816 1 BOLT – carriage, 1/2 NC x 1 inch
13 231-5148 1 NUT, Flg, USR, 1/2″-13
15 125974A1 1 BAR – jackshaft
16 138653A1 1 SUPPORT – knife drive
18 125985A1 1 TUBE – jackshaft shield
19 282-1448 2 SCREW – self tapping, No. 8-18 x 1 inch
20 409-7620 1 BOLT – hex serrated flange, 3/8 NC x 1-1/4 inch
21 409-7616 3 BOLT – hex serrated flange, 3/8 NC x 1 inch
22 231-5146 4 NUT, Flg, USR, 3/8″-16
27 125992A1 3 SHIELD – jackshaft
34 138005A1 1 HANGER – drive line
35 425-108 2 NUT – hex, 1/2 inch NC
36 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
40 125988A1 1 TUBE – jackshaft shield, replaces 125986A1
45 225265R1 1 CLAMP – jackshaft
46 413-840 1 BOLT – hex, 1/2 NC x 2-1/2 inch
47 231-4118 1 NUT – hex, self-locking, 1/2 inch NC
1 1313569C92 1 SHAFT ASSEMBLY – drive, auger (With decals), Includes: Ref. 2 – 32
4 933916R1 4 RING – internal retaining, 26 mm
5 933756R1 2 FITTING – grease, 6 x 1.00 mm, straight
6 1325022C1 1 YOKE – drive shaft
9 1326528C1 1 DECAL – Danger, shield missing, do not operate
12 838-5845 1 PIN – roll, 8 x 45 mm
14 933916R1 4 RING – internal retaining, 26 mm
15 933756R1 2 FITTING – grease, 6 x 1.00 mm, straight
16 1325022C1 1 YOKE – drive shaft
26 1326627C92 1 SHIELD ASSEMBLY – outer, Includes: Ref. 27
28 1326630C92 1 SHIELD ASSEMBLY – inner, Includes: Ref. 29
30 1326625C91 2 SHIELD ASSEMBLY – yoke, Includes: Ref. 31
32 1326632C1 2 CHAIN – drive shaft
2 1326494C1 2 SHIELD – drive shaft
3 1326500C1 2 COLLAR – drive shaft
4 1326498C1 4 RING – outer
5 1326499C1 2 BEARING – ball
6 1326490C1 2 YOKE ASSEMBLY – drive shaft, Includes: Ref. 7
7 1281458C1 1 KIT – pin
8 1281444C1 2 KIT – cross and bearing, drive shaft
11 1281445C1 1 YOKE – end, male
12 30907R1 2 PIN – slotted spring, 10 x 70 mm
13 1326501C1 1 TUBE – drive shaft, inner
14 1326495C1 2 FLANGE – guard
15 1281450C1 2 RING – bearing
17 1326503C1 1 SHIELD – outer
18 1326502C1 1 TUBE – drive shaft, outer
19 1326493C1 1 YOKE – end, female
20 1326504C1 1 TUBE – shield, inner
21 1281453C1 1 CHAIN – anti-rotation
5 1326528C1 1 DECAL – Danger, shield missing, do not operate
7 606177R1 1 RING – retaining, 0.078 inch thick
7 1986059C1 1 RING – retaining, 0.058 inch thick
8 219-40 1 FITTING – grease, 65 degree, 1/8 PT x 7/8 inch
9 1326580C1 1 COLLAR – yoke
10 1326585C1 1 SPRING – shield
11 21505R1 3 BALL – 1/2 inch
12 1326583C1 1 RACE – shaft retainer
13 19877R1 3 PIN – dowel, 3/16 x 1/2 inch
14 100-11187 1 Ring, Snap, #187, Ext
22 606177R1 1 RING – retaining, 0.078 inch thick
22 1986059C1 1 RING – retaining, 0.058 inch thick
23 219-40 1 FITTING – grease, 65 degree, 1/8 PT x 7/8 inch
24 1326580C1 1 COLLAR – yoke
25 1326585C1 1 SPRING – shield
26 211-1016 3 BALL – chrome alloy steel, 1/2 inch, grade 24
27 1326583C1 1 RACE – shaft retainer
28 19877R1 3 PIN – dowel, 3/16 x 1/2 inch
29 100-11187 1 Ring, Snap, #187, Ext
35 1326594C1 1 SHIELD – outer
36 1326579C1 1 DECAL – lubricate journal and bearing
37 1980787C1 1 BEARING KIT – shield
39 1326593C1 1 SHIELD – inner
40 1980787C1 1 BEARING KIT – shield
1 1313570C92 1 SHAFT ASSEMBLY – drive, auger (With decals), Includes: Ref. 2 – 32
4 Q2937 1 PIN, LOCK, M8 x 55, Slotted
6 933916R1 4 RING – internal retaining, 26 mm
7 933756R1 2 FITTING – grease, 6 x 1.00 mm, straight
8 1325022C1 1 YOKE – drive shaft
11 1326528C1 1 DECAL – Danger, shield missing, do not operate
14 838-5845 1 PIN – roll, 8 x 45 mm
16 933916R1 4 RING – internal retaining, 26 mm
17 933756R1 2 FITTING – grease, 6 x 1.00 mm, straight
18 1325022C1 1 YOKE – drive shaft
26 1326628C91 1 SHIELD ASSEMBLY – outer, Includes: Ref. 27
28 1326631C91 1 SHIELD ASSEMBLY – inner, Includes: Ref. 29
29 1544650C1 1 BEARING – shield
30 1326625C91 2 SHIELD ASSEMBLY – yoke, Includes: Ref. 31
32 1326632C1 2 CHAIN – drive shaft
2 1326494C1 2 SHIELD – drive shaft
3 1326500C1 2 COLLAR – drive shaft
4 1326498C1 4 RING – outer
5 1326499C1 2 BEARING – ball
6 1326490C1 2 YOKE ASSEMBLY – drive shaft, Includes: Ref. 7
7 1281458C1 1 KIT – pin
8 1281444C1 2 KIT – cross and bearing, drive shaft
11 1281445C1 1 YOKE – end, male
12 30907R1 2 PIN – slotted spring, 10 x 70 mm
13 1326491C1 1 TUBE – drive shaft, inner
14 1326495C1 2 FLANGE – guard
15 1281450C1 2 RING – bearing
17 1326496C1 1 SHIELD – outer
18 1326492C1 1 TUBE – drive shaft, outer
19 1326493C1 1 YOKE – end, female
20 1326497C1 1 TUBE – shield, inner
21 1281453C1 1 CHAIN – anti-rotation
5 1326528C1 1 DECAL – Danger, shield missing, do not operate
7 606177R1 1 RING – retaining, 0.078 inch thick
7 1986059C1 1 RING – retaining, 0.058 inch thick
8 219-40 1 FITTING – grease, 65 degree, 1/8 PT x 7/8 inch
9 1326580C1 1 COLLAR – yoke
10 1326585C1 1 SPRING – shield
11 21505R1 3 BALL – 1/2 inch
12 1326583C1 1 RACE – shaft retainer
13 19877R1 3 PIN – dowel, 3/16 x 1/2 inch
14 100-11187 1 Ring, Snap, #187, Ext
22 606177R1 1 RING – retaining, 0.078 inch thick
22 1986059C1 1 RING – retaining, 0.058 inch thick
23 219-40 1 FITTING – grease, 65 degree, 1/8 PT x 7/8 inch
24 1326580C1 1 COLLAR – yoke
25 1326585C1 1 SPRING – shield
26 21505R1 3 BALL – 1/2 inch
27 1326583C1 1 RACE – shaft retainer
28 19877R1 3 PIN – dowel, 3/16 x 1/2 inch
29 100-11187 1 Ring, Snap, #187, Ext
36 1326579C1 1 DECAL – lubricate journal and bearing
37 1980787C1 1 BEARING KIT – shield
40 1980787C1 1 BEARING KIT – shield
1 106001A2 1 AUGER – (15.0 foot)
1 106002A2 1 AUGER – (16.5 foot)
1 106003A2 1 AUGER – (17.5 foot)
1 106004A2 1 AUGER – (20.0 foot)
1 106005A2 1 AUGER – (22.5 foot)
1 106006A2 1 AUGER – (25.0 foot)
1 106007A2 1 AUGER – (30.0 foot)
2 106024A1 1 SHAFT ASSEMBLY – drive
3 426-616 12 BOLT, Hex, 3/8″-16 x 1″, G8, Full Thd
4 429-106 12 NUT – hex, 3/8 inch NC, grade 8
5 492-11038 12 3/8″
6 25534R1 12 WASHER – flat, 13/32 x 13/16 x 1/16 inch
7 1307256C1 1 RETAINER – auger LH
8 664073R92 2 BEARING – ball, auger shaft
9 455112R11 2 COLLAR – locking, bearing (With set screw)
10 663562R1 4 FLANGE – bearing, round (Alternate with 1307583C1)
10 1307583C1 4 FLANGE – bearing, square (Alternate with 663562R1)
13 232-5318 8 NUT, LOCK, Flg, 1/2″-13
14 204807C91 1 BEARING – ball, auger shaft inner
15 455102R21 1 COLLAR – locking, bearing, includes set screw
16 937517R1 2 FLANGE – bearing
17 231-5315 3 NUT, LOCK, Flg, 5/16″-18
18 1307262C1 1 TUBE – finger adjusting (15.0 foot)
18 1326828C1 1 TUBE – finger adjusting (16.5 foot)
18 1307263C1 1 TUBE – finger adjusting (17.5 foot)
18 1307264C1 1 TUBE – finger adjusting (20.0 foot)
18 1307265C1 1 TUBE – finger adjusting (22.5 foot)
19 1307266C1 1 TUBE – finger adjusting (25.0 foot)
19 1307267C1 1 TUBE – finder adjusting (30.0 foot)
20 184505C1 2 COVER – handhole
21 281-1478 12 SCREW – self-tapping, hex washer head, 1/4 NC x 1/2 inch
1 1307259C2 18 GUIDE – finger
2 413-48 36 BOLT – hex, 1/4 NC x 1/2 inch
3 127550 36 NUT – special, 1/4 inch NC
4 1320699C1 18 FINGER – retractable
5 185309A1 18 PIN – hair, quick attachable
6 1308425C1 20 HUB – finger
7 1316383C1 1 SHAFT – finger
8 1326467C1 1 BAR – finger shaft clamp
9 433-836 3 BOLT – carriage, 1/2 NC x 2-1/4 inch
10 231-4118 3 NUT – hex, self-locking, 1/2 inch NC
11 496-21053 3 WASHER – flat, 17/32 x 1-1/16 x 1/8 inch, hardened
12 1320698C1 1 ANGLE – finger drive shaft
1 1308445C2 1 EXTENSION – auger flight, left-hand
2 1308446C2 1 EXTENSION – auger flight, right-hand
3 409-7816 2 BOLT – hex serrated flange, 1/2 NC x 1 inch
4 434-816 4 BOLT – carriage, 1/2 NC x 1 inch
5 232-5318 6 NUT – hex flange, self-locking, 1/2 inch NC
6 167823C1 2 COVER – finger hole
7 413-412 4 BOLT – hex, 1/4 NC x 3/4 inch
8 231-4144 4 NUT, LOCK, 1/4″-20, GB
1 106041A1 1 BRACKET ASSEMBLY – auger, left-hand, Includes: Ref. 2
2 189971C1 1 BUSHING – pivot
3 1968840C1 2 SPACER – 3/4 OD x 1-1/16 inch, auger pivot
4 413-832 2 BOLT – hex, 1/2 NC x 2 inch
5 232-5318 2 NUT, LOCK, Flg, 1/2″-13
6 495-21056 4 WASHER – flat, 9/16 x 1-3/8 x 7/64 inch
8 128429A2 1 BRACKET ASSEMBLY – auger, right-hand, Includes: Ref. 9
9 189971C1 1 BUSHING – pivot
10 496-21053 8 WASHER – flat, 17/32 x 1-1/16 x 1/8 inch, hardened
13 128199A1 1 SUPPORT – auger adjusting, left-hand
14 133822A1 1 SUPPORT – auger adjusting, right-hand
15 425-108 8 NUT – hex, 1/2 inch NC
16 1320723C1 2 SUPPORT – auger lift
17 480523R1 2 PIN – hair
18 432-1218 2 3/16″ x 1 1/8″
19 439-5844 2 PIN – headed, 1/2 x 2-3/4 inch
20 127870A1 2 BOLT – eye, auger pivot
23 664073R92 1 BEARING – ball, drive shaft
24 663562R1 2 FLANGE – bearing, round (Alternate with 1307583C1)
24 1307583C1 2 FLANGE – bearing, square (Alternate with 663562R1)
25 434-816 4 BOLT – carriage, 1/2 NC x 1 inch
26 232-5318 6 NUT – hex flange, self-locking, 1/2 inch NC
27 1320695C1 1 TUBE – finger adjusting, inner
28 1307195C2 1 U-BOLT – 1/2 inch NC
29 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
30 409-7816 2 BOLT – hex serrated flange, 1/2 NC x 1 inch
2 106055A1 1 SPROCKET – auger drive, 152 RPM, 56 tooth (Standard)
2 106056A1 1 SPROCKET – auger drive, 170 RPM, 50 tooth (Optional)
2 106057A1 1 SPROCKET – auger drive, 189 RPM, 45 tooth (Optional)
2 106058A1 1 SPROCKET – auger drive, 213 RPM, 40 tooth (Optional)
3 496-21106 1 WASHER – flat, 1-1/16 x 2 x 13/64 inch, hardened
4 425-1416 2 NUT – hex, jam, 1 inch NC
5 125966A1 1 HUB – auger drive sprocket
6 413-832 2 BOLT – hex, 1/2 NC x 2 inch
7 425-108 2 NUT – hex, 1/2 inch NC
8 125990A1 1 SPROCKET – auger drive, 17 tooth
9 1319250C1 4 BOLT – hex flange, special, 3/8 NC x 1 inch
10 179013A1 1 SPROCKET – idler, 15 tooth
11 413-836 1 BOLT – hex, 1/2 NC x 2-1/4 inch
12 131-943 1 NUT, Flg, 1/2″-13, G5
13 495-11053 3 WASHER, 1/2″, SAE (17/32″ x 1-1/16″ x 3/32″)
14 128261A3 1 BRACKET – idler sprocket
15 413-820 1 BOLT – hex, 1/2 NC x 1-1/4 inch
16 131-943 1 NUT, Flg, 1/2″-13, G5
17 495-81213 2 WASHER – flat, 1-13/32 x 2 x 3/64 inch
1 1316566C3 1 SHIELD – auger drive
2 1326230C1 1 HINGE – shield, auger drive
3 1326408C2 1 STUD – fastener, shield
4 1326407C1 2 RETAINER – shield stud
5 495-81023 6 WASHER – flat, 17/32 x 1-1/4 x 1/32 inch
6 477-82508 8 BOLT – serrated slotted truss head, 1/4 NC x 1/2 inch
7 231-5144 8 NUT, Flg, USR, 1/4″-20
8 495-11028 4 WASHER – flat, 9/32 x 5/8 x 1/16 inch
9 1316721C1 1 SUPPORT – auger shield, front
10 154273C1 2 BOLT – hex, self-locking, special, 3/8 NC x 1 inch
11 231-5146 2 NUT, Flg, USR, 3/8″-16
1 225265R1 1 CLAMP – jackshaft
2 413-840 1 BOLT – hex, 1/2 NC x 2-1/2 inch
3 231-4118 1 NUT – hex, self-locking, 1/2 inch NC
5 106023A2 1 SHIELD – clutch
6 409-7412 2 BOLT – hex serrated flange, 1/4 NC x 3/4 inch
7 231-5144 2 NUT, Flg, USR, 1/4″-20
8 125975A1 1 BAR – jackshaft
9 156816C91 2 BEARING – ball, jackshaft
10 180955C1 4 FLANGE – bearing
11 434-616 6 BOLT – carriage, 3/8 NC x 1 inch
12 231-5146 6 NUT, Flg, USR, 3/8″-16
13 106084A2 1 SUPPORT – jackshaft
14 154273C1 2 BOLT – hex, self-locking, special, 3/8 NC x 1 inch
15 231-5146 2 NUT, Flg, USR, 3/8″-16
16 106087A1 1 SHIELD – cover
17 183-123 2 SCREW – thumb with shoulder, 5/16 NC x 3/4 inch
18 488837C1 2 NUT – speed, 5/16 inch
24 138005A1 1 HANGER – drive line
25 425-108 2 NUT – hex, 1/2 inch NC
26 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
1 225265R1 1 CLAMP – jackshaft
2 413-840 1 BOLT – hex, 1/2 NC x 2-1/2 inch
3 231-4118 1 NUT – hex, self-locking, 1/2 inch NC
5 106023A2 1 SHIELD – clutch
6 409-7412 2 BOLT – hex serrated flange, 1/4 NC x 3/4 inch
7 231-5144 2 NUT, Flg, USR, 1/4″-20
8 125976A1 1 BAR – jackshaft, 17.5 foot
8 125977A1 1 BAR – jackshaft, 20.0 foot
9 156816C91 2 BEARING – ball, jackshaft
10 180955C1 4 FLANGE – bearing
11 434-616 3 BOLT – carriage, 3/8 NC x 1 inch
12 434-620 3 BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/4″, G5, Full Thd
13 231-5146 9 NUT, Flg, USR, 3/8″-16
14 128416A1 1 SUPPORT – jackshaft
15 409-7512 2 BOLT – hex serrated flange, 5/16 NC x 3/4 inch
16 231-5145 2 NUT – hex serrated flange, 5/16 inch NC
17 434-816 1 BOLT – carriage, 1/2 NC x 1 inch
18 231-5148 1 NUT, Flg, USR, 1/2″-13
19 125992A1 2 SHIELD – jackshaft
20 282-1448 2 SCREW – self tapping, No. 8-18 x 1 inch
21 125987A1 1 TUBE – jackshaft shield, 17.5 foot
21 125988A1 1 TUBE – jackshaft shield, 20.0 foot
33 138005A1 1 HANGER – drive line
34 425-108 2 NUT – hex, 1/2 inch NC
35 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
1 225265R1 1 CLAMP – jackshaft
2 413-840 1 BOLT – hex, 1/2 NC x 2-1/2 inch
3 231-4118 1 NUT – hex, self-locking, 1/2 inch NC
5 106023A2 1 SHIELD – clutch
6 409-7412 2 BOLT – hex serrated flange, 1/4 NC x 3/4 inch
7 231-5144 2 NUT, Flg, USR, 1/4″-20
8 125978A1 1 BAR – jackshaft (22.5 foot)
8 125979A1 1 BAR – jackshaft (25.0 foot)
9 156816C91 2 BEARING – ball, jackshaft
10 180955C1 4 FLANGE – bearing
11 434-616 6 BOLT – carriage, 3/8 NC x 1 inch
12 231-5146 6 NUT, Flg, USR, 3/8″-16
13 125992A1 2 SHIELD – jackshaft
14 282-1448 2 SCREW – self tapping, No. 8-18 x 1 inch
15 409-1512 2 BOLT – hex, self-locking, 5/16 NC x 3/4 inch
16 231-5145 2 NUT – hex serrated flange, 5/16 inch NC
17 125984A1 1 TUBE – jackshaft shield (22.5 foot)
17 125985A1 1 TUBE – jackshaft shield (25.0 foot)
29 138005A1 1 HANGER – drive line
30 425-108 2 NUT – hex, 1/2 inch NC
31 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
1 225265R1 1 CLAMP – jackshaft
2 413-840 1 BOLT – hex, 1/2 NC x 2-1/2 inch
3 231-4118 1 NUT – hex, self-locking, 1/2 inch NC
5 106023A2 1 SHIELD – clutch
6 409-7412 2 BOLT – hex serrated flange, 1/4 NC x 3/4 inch
7 231-5144 2 NUT, Flg, USR, 1/4″-20
8 125980A1 1 BAR – jackshaft
9 156816C91 3 BEARING – ball, jackshaft
10 180955C1 6 FLANGE – bearing
11 434-616 6 BOLT – carriage, 3/8 NC x 1 inch
12 434-620 3 BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/4″, G5, Full Thd
13 231-5146 9 NUT, Flg, USR, 3/8″-16
14 125992A1 4 SHIELD – jackshaft
15 282-1448 2 SCREW – self tapping, No. 8-18 x 1 inch
16 409-7512 2 BOLT – hex serrated flange, 5/16 NC x 3/4 inch
17 231-5145 2 NUT – hex serrated flange, 5/16 inch NC
18 125989A1 1 TUBE – jackshaft shield
19 128416A1 1 SUPPORT – jackshaft
20 434-816 1 BOLT – carriage, 1/2 NC x 1 inch
21 231-5148 1 NUT, Flg, USR, 1/2″-13
22 409-1512 2 BOLT – hex, self-locking, 5/16 NC x 3/4 inch
23 231-5145 2 NUT – hex serrated flange, 5/16 inch NC
28 125985A1 1 TUBE – jackshaft shield
34 138005A1 1 HANGER – drive line
35 425-108 2 NUT – hex, 1/2 inch NC
36 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
1 106044A1 1 SHAFT ASSEMBLY – auger drive, with decals, Includes: Ref. 2 – 30
4 933916R1 4 RING – internal retaining, 26 mm
5 933756R1 2 FITTING – grease, 6 x 1.00 mm, straight
9 1326528C1 1 DECAL – Danger, shield missing, do not operate
12 838-5845 1 PIN – roll, 8 x 45 mm
14 933916R1 4 RING – internal retaining, 26 mm
15 933756R1 2 FITTING – grease, 6 x 1.00 mm, straight
16 106089A1 1 CLUTCH ASSEMBLY – drive shaft, See Figure 9C-28
25 106104A1 1 SHIELD ASSEMBLY – outer, Includes: Ref. 26
27 106106A1 1 SHIELD ASSEMBLY – inner, Includes: Ref. 29
28 1326625C91 1 SHIELD ASSEMBLY – yoke, outer, Includes: Ref. 29
30 1326632C1 2 CHAIN – drive shaft, safety
1 106043A1 1 SHAFT ASSEMBLY – auger drive, with decals, Includes: Ref. 2 – 30
4 933916R1 4 RING – internal retaining, 26 mm
5 933756R1 2 FITTING – grease, 6 x 1.00 mm, straight
9 1326528C1 1 DECAL – Danger, shield missing, do not operate
12 Q2937 1 PIN, LOCK, M8 x 55, Slotted
14 933916R1 4 RING – internal retaining, 26 mm
15 933756R1 2 FITTING – grease, 6 x 1.00 mm, straight
16 106089A1 1 CLUTCH ASSEMBLY – drive shaft, See Figure 9C-28
25 106103A1 1 SHIELD ASSEMBLY – outer female shaft, Includes: Ref. 26
27 106105A1 1 SHIELD ASSEMBLY – inner, Includes: Ref. 29
28 1326625C91 1 SHIELD ASSEMBLY – yoke, outer, Includes: Ref. 29
30 1326632C1 2 CHAIN – drive shaft
1 184596C2 1 SHAFT – feeder jackshaft (1420 Combine)
2 195560C3 1 SHAFT – feeder jackshaft (1440 and 1460 Combine)
3 195559C3 1 SHAFT – feeder jackshaft (1480 Combine)
1 106089A1 1 CLUTCH ASSEMBLY – drive shaft, Includes: Ref. 2 – 11
2 224579A1 1 HOUSING – slip clutch
3 224587A1 1 YOKE – flange cover
4 224585A1 1 HUB ASSEMBLY, Includes: Ref. 5
5 1311950C1 1 KIT – push pin
6 224584A1 2 PLATE – friction
7 224582A1 1 PLATE – pressure
8 224643A1 1 DISC – internal
9 224581A1 1 WASHER – Belleville
10 224580A1 1 RING – retaining
11 861-8020 8 BOLT – hex socket, 8 – 1.25 x 20 mm, class 12.9
1 133209A1 1 BEAM ASSEMBLY – main, with decals (15.0 foot)
1 133210A1 1 BEAM ASSEMBLY – main, with decals (16.5 foot)
1 133211A1 1 BEAM ASSEMBLY – main, with decals (17.5 foot)
1 133212A1 1 BEAM ASSEMBLY – main, with decals (20.0 foot)
3 1307374C5 1 POST – vertical, left-hand
4 1307375C5 1 POST – vertical, right-hand
6 409-7816 12 BOLT – hex serrated flange, 1/2 NC x 1 inch
7 232-5138 30 NUT, Flg, USR, 1/2″-13, G8
8 1326056C92 1 SHEET ASSEMBLY – rear, left-hand, with decals (15.0 foot)
8 1326802C2 1 SHEET ASSEMBLY – rear, left-hand, with decals (16.5 foot)
8 1326058C92 1 SHEET ASSEMBLY – rear, left-hand, with decals (17.5 foot)
8 1326060C92 1 SHEET ASSEMBLY – rear, left-hand, with decals (20.0 foot)
10 1326057C93 1 SHEET ASSEMBLY – rear, right-hand, with decals (15.0 foot)
10 1326803C3 1 SHEET ASSEMBLY – rear, right-hand, with decals (16.5 foot)
10 1326059C93 1 SHEET ASSEMBLY – rear, right-hand, with decals (17.5 foot)
10 1326061C93 1 SHEET ASSEMBLY – rear, right-hand, with decals (20.0 foot)
11 133973A1 4 ANGLE – chain
12 477-73108 5 BOLT – serrated slotted truss head, 5/16 NC x 1/2 inch
13 231-5145 4 NUT – hex serrated flange, 5/16 inch NC
14 326-816 20 BOLT, Hex, 1/2″-13 x 1″, G8, Full Thd
15 396-31053 2 WASHER – flat, 17/32 x 1-1/16 x 3/16 inch, hardened
16 135370A1 1 TRIM – edge, 7-5/8 inch (194 mm) long, cut from 1330108CX bulk trim, lift cylinder hose, front
17 87435C1 1 TRIM – edge, 3 inch (76 mm) long, cut from 1330108CX bulk trim, lift cylinder hose, rear
18 326-820 2 BOLT, Hex, 1/2″-13 x 1 1/4″, G8, Full Thd
28 131176A1 1 SHEET – end, left-hand
29 130817A1 1 SHEET – end, right-hand
31 1313966C1 2 BAR – shim
32 409-7620 6 BOLT – hex serrated flange, 3/8 NC x 1-1/4 inch
33 409-7612 12 BOLT – hex serrated flange, 3/8 NC x 3/4 inch
34 231-5146 24 NUT, Flg, USR, 3/8″-16
45 1307500C94 1 BEAM ASSEMBLY – lower (15.0 foot), Includes: Ref. 46 & 47
45 1326806C4 1 BEAM ASSEMBLY – lower (16.5 foot), Includes: Ref. 46 & 47
45 1307501C95 1 BEAM ASSEMBLY – lower (17.5 foot), Includes: Ref. 46 & 47
45 1307502C95 1 BEAM ASSEMBLY – lower (20.0 foot), Includes: Ref. 46 & 47
46 1316827C1 1 BUSHING – pivot
47 206321H1 1 Ring, Snap, 1.625″, Int, #162
48 219-87 1 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap
49 1316564C1 2 ANGLE – stripper extension
53 434-816 4 BOLT – carriage, 1/2 NC x 1 inch
54 232-5318 4 NUT, LOCK, Flg, 1/2″-13
58 1307371C1 2 BAR – feeder latch
59 177134C3 2 U-BOLT – feeder latch
60 231-14110 4 NUT – hex, self-locking, 5/8 inch NC
1 133213A1 1 BEAM – main, with decals (22.5 foot)
1 133214A1 1 BEAM – main, with decals (25.0 foot)
1 133215A1 1 BEAM – main, with decals (30.0 foot)
3 1307374C5 1 POST – vertical, left-hand
4 1307375C5 1 POST – vertical, right-hand
5 1307376C4 1 POST – intermediate, left-hand
5 128414A2 1 POST – intermediate, right-hand
6 409-7816 20 BOLT – hex serrated flange, 1/2 NC x 1 inch (22.5 foot)
6 1302143C1 20 BOLT – hex flange, special, 1 inch
7 232-5138 54 NUT, Flg, USR, 1/2″-13, G8
8 326-816 38 BOLT, Hex, 1/2″-13 x 1″, G8, Full Thd
9 326-820 2 BOLT, Hex, 1/2″-13 x 1 1/4″, G8, Full Thd
10 396-31053 4 WASHER – flat, 17/32 x 1-1/16 x 3/16 inch, hardened
12 1307093C1 1 SHEET – rear, left-hand, with decals (22.5 foot)
12 1307095C1 1 SHEET – rear, left-hand, with decals (25.0 foot)
12 1307097C1 1 SHEET – rear, left-hand, with decals (30.0 foot)
14 1307094C1 1 SHEET – rear, right-hand, with decals (22.5 foot)
14 1307096C1 1 SHEET – rear, right-hand, with decals (25.0 foot)
14 1307098C1 1 SHEET – rear, right-hand, with decals (30.0 foot)
17 1326062C92 1 SHEET – center rear, left-hand, with decals
20 1326063C93 1 SHEET – center rear, right-hand, with decals
22 477-73108 1 BOLT – serrated slotted truss head, 5/16 NC x 1/2 inch
28 131176A1 1 SHEET – end, left-hand
29 130817A1 1 SHEET – end, right-hand
31 1313966C1 2 BAR – shim
32 409-7620 6 BOLT – hex serrated flange, 3/8 NC x 1-1/4 inch
33 409-7612 12 BOLT – hex serrated flange, 3/8 NC x 3/4 inch
34 231-5146 18 NUT, Flg, USR, 3/8″-16
35 133973A1 4 ANGLE – chain
36 477-73108 4 BOLT – serrated slotted truss head, 5/16 NC x 1/2 inch
37 231-5145 4 NUT – hex serrated flange, 5/16 inch NC
38 135370A1 1 TRIM – edge, 194 mm (7-5/8 inch) long, cut from 1330108CX bulk trim, lift cylinder hose, front
39 87435C1 1 TRIM – edge, 76 mm (3 inch) long, cut from 1330108CX bulk trim, lift cylinder hose, rear
45 1307503C94 1 BEAM ASSEMBLY – lower (22.5 foot), Includes: Ref. 46 & 47
45 1307504C94 1 BEAM ASSEMBLY – lower (25.0 foot), Includes: Ref. 46 & 47
45 1307505C94 1 BEAM ASSEMBLY – lower (30.0 foot), Includes: Ref. 46 & 47
46 1316827C1 1 BUSHING – pivot
47 100-28162 1 Ring, Snap, 1.625″, Int, #162
48 219-87 1 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap
49 1316564C1 2 ANGLE – stripper extension
51 434-516 4 BOLT – carriage, 5/16 NC x 1 inch
54 231-5148 17 NUT, Flg, USR, 1/2″-13
58 1307371C1 2 BAR – feeder latch
59 177134C3 2 U-BOLT – feeder latch
60 231-14110 4 NUT – hex, self-locking, 5/8 inch NC
1 1313979C91 1 SUPPORT ASSEMBLY – pivot, outer, Includes: Ref. 2 & 3
2 1316827C1 1 BUSHING – pivot
3 206321H1 1 Ring, Snap, 1.625″, Int, #162
4 219-87 1 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap
6 409-7820 5 BOLT – hex serrated flange, 1/2 NC x 1-1/4 inch
8 128452A2 1 SUPPORT – runner, left hand, (For #8) weldment for the inner pivot assembly is 1313980c91 dmm
9 1316828C1 1 SPACER – support
10 232-41110 2 NUT, LOCK, 5/8″-11, GC
11 130867A1 1 STRAP – down stop, left-hand
15 439-1824 2 PIN – headed, 1/2 x 1-1/2 inch, grade 2
18 480523R1 2 PIN – hair
34 1316677C2 1 SUPPORT ASSEMBLY – runner, right-hand, Includes: Ref. 35
35 551068R1 2 BUSHING – concave control housing
36 1316883C2 1 SPACER – 5/8 x 5 inch
37 413-1096 1 BOLT – hex, 5/8 NC x 6 inch
38 232-41110 1 NUT, LOCK, 5/8″-11, GC
39 137928A1 1 SUPPORT – spring, left-hand
40 409-7816 2 BOLT – hex serrated flange, 1/2 NC x 1 inch
41 413-836 1 BOLT – hex, 1/2 NC x 2-1/4 inch
42 610399R1 1 SPACER – 1/2 x 7/8 inch
43 495-11053 1 WASHER, 1/2″, SAE (17/32″ x 1-1/16″ x 3/32″)
45 1313103C1 1 SPRING – left
46 1313104C1 1 PLUG – spring, lower
47 439-5832 1 PIN – headed, 1/2 x 2 inch
48 432-1216 1 3/16″ x 1″
49 124366A1 1 PLUG – spring, upper
50 124365A1 1 BOLT – hex, special, 1/2 NC x 10 inch
51 396-31066 1 WASHER – flat, 21/32 x 1-5/16 x 3/16 inch
52 425-1010 1 NUT, 5/8″-11, G5
53 219-87 1 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap
54 414077C1 2 BOLT – hex flange, special, 5/8 NC x 1-3/4 inch
55 414089C1 2 NUT – hex flange, special, 5/8 inch NF, grade 8
1 128512A1 1 SUPPORT – skid, left-hand (15.0, 20.0, 25.0 and 30.0 foot)
1 128514A1 1 SUPPORT – skid, left-hand (16.5, 17.5 and 22.5 foot)
2 434-816 2 BOLT – carriage, 1/2 NC x 1 inch
3 232-5318 2 NUT, LOCK, Flg, 1/2″-13
5 1307398C4 1 SKID – runner support (16.5, 17.5 and 22.5 foot), #4/5—the wear plate that goes on these two items is
10 1316335C5 1 SKID – runner support, right-hand (15.0, 20.0, 25.0 and 30.0 foot)
11 434-616 4 BOLT – carriage, 3/8 NC x 1 inch
12 231-5146 4 NUT, Flg, USR, 3/8″-16
15 1320914C2 2 TUBE – cutter bar (15.0 foot)
15 1320913C2 2 TUBE – cutter bar (17.5 foot)
15 1320912C2 2 TUBE – cutter bar (20.0 foot)
15 1320911C2 2 TUBE – cutter bar (16.5 and 22.5 foot)
15 1320910C2 2 TUBE – cutter bar (25.0 foot)
15 1320909C2 2 TUBE – cutter bar (30.0 foot)
19 1307468C2 1 SPRING – cutter bar support, right-hand
1 1970379C2 3 SKID – cutter bar, auxiliary
2 1970431C1 3 SUPPORT – skid, auxiliary
3 1977119C1 1 BAR – skid support
4 434-736 4 BOLT – carriage, 7/16 NC x 2-1/4 inch
5 180151 4 BOLT – hex, special, 7/16 NC x 1-3/4 inch
6 1313463C1 6 NUT – hex small flange lock, 7/16 inch NC
7 434-616 6 BOLT – carriage, 3/8 NC x 1 inch
8 420-2620 6 BOLT – plow, 3/8 NC x 1-1/4 inch
9 231-5146 12 NUT, Flg, USR, 3/8″-16
1 1313156C2 1 SHIELD – center, bottom
2 1326814C2 1 SHIELD – left-hand, bottom, (16.5 foot)
3 1326815C2 1 SHIELD – right-hand, bottom, (16.5 foot)
3 1313140C2 1 SHIELD – right-hand, bottom, (20.0 foot)
3 1313141C2 1 SHIELD – right-hand, bottom, (22.5 foot)
3 1313142C2 1 SHIELD – right-hand, bottom, (25.0 foot)
3 1313143C2 1 SHIELD – right-hand, bottom, (30.0 foot)
7 231-5344 4 NUT – hex flange, self-locking, 1/4 inch NC
1 1316060C4 1 DIVIDER – header, left-hand
2 1316061C1 1 DIVIDER – header, right-hand
3 1316709C1 2 CLAMP – wing
4 185129C1 2 WASHER – flat, special, 17/32 x 1-1/2 x 3/16 inch
5 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
6 1316847C2 1 BRACKET – guard support
7 434-616 2 BOLT – carriage, 3/8 NC x 1 inch
8 231-4116 2 NUT – hex, self-locking, 3/8 inch NC
9 480556C1 2 BOLT – hex, special, 1/2 NC x 8 inch
10 496-21053 2 WASHER – flat, 17/32 x 1-1/16 x 1/8 inch, hardened
11 1316731C1 2 PLUG – spring
12 1316732C1 2 SPRING – divider pivot
13 425-108 2 NUT – hex, 1/2 inch NC
16 1316585C1 2 SUPPORT – divider pivot
17 433-828 4 BOLT – carriage, 1/2 NC x 1-3/4 inch
18 496-21053 4 WASHER – flat, 17/32 x 1-1/16 x 1/8 inch, hardened
19 231-4118 4 NUT – hex, self-locking, 1/2 inch NC
20 326-1036 2 BOLT, Hex, 5/8″-11 x 2 1/4″, G8
21 396-31066 2 WASHER – flat, 21/32 x 1-5/16 x 3/16 inch
22 425-1010 2 NUT, 5/8″-11, G5
23 439-51224 2 PIN – headed, 3/4 x 1-1/2 inch
24 1978738C1 2 PIN – cotter, hair, 3/16 inch
27 1316787C92 1 LEVER ASSEMBLY – divider pivot, right-hand, Includes: Ref. 29 & 30
28 136881A1 1 LEVER ASSEMBLY – divider pivot, left-hand, Includes: Ref. 29 & 30
29 559317R1 1 BUSHING – pivot
30 219-93 1 FITTING – grease, 90 degree, 1/4-28 special taper x 3/4 inch
31 1326465C2 2 SPACER – link pivot
32 413-848 2 BOLT – hex, 1/2 NC x 3 inch
33 185129C1 2 WASHER – flat, special, 17/32 x 1-1/2 x 3/16 inch
34 231-4118 3 NUT – hex, self-locking, 1/2 inch NC
37 140387A1 1 SUPPORT ASSEMBLY – divider, left-hand, Includes: Ref. 38
38 1280291C1 4 BUSHING – 3/4 inch (19 mm) diameter, pivot
39 409-7816 4 BOLT – hex serrated flange, 1/2 NC x 1 inch
43 1316782C1 3 BUSHING – divider pivot
44 433-852 3 BOLT – carriage, 1/2 NC x 3-1/4 inch
45 498-81006 6 WASHER – flat, square hole, 17/32 x 1-1/4 x 1/8 inch
46 231-4118 3 NUT – hex, self-locking, 1/2 inch NC
47 1316322C92 1 SUPPORT ASSEMBLY – divider, right-hand, Includes: Ref. 48
48 1280291C1 2 BUSHING – 3/4 inch (19 mm) diameter, pivot
49 434-816 4 BOLT – carriage, 1/2 NC x 1 inch
50 231-5148 4 NUT, Flg, USR, 1/2″-13
51 434-616 2 BOLT – carriage, 3/8 NC x 1 inch
52 231-5146 2 NUT, Flg, USR, 3/8″-16
53 1316674C2 1 BRACKET – downstop, right-hand
54 495-11053 2 WASHER, 1/2″, SAE (17/32″ x 1-1/16″ x 3/32″)
55 432-816 2 1/8″ x 1″
1 1316197C2 2 SUPPORT – wing, upper
2 477-73116 8 BOLT – serrated slotted truss head, 5/16 NC x 1 inch
3 231-5145 8 NUT – hex serrated flange, 5/16 inch NC
4 1307691C1 2 TUBE – wing, lower
5 1307692C2 2 TUBE – wing, upper
6 413-524 2 BOLT – hex, 5/16 NC x 1-1/2 inch
7 413-632 2 BOLT – hex, 3/8 NC x 2 inch
8 232-4115 2 NUT, LOCK, 5/16″-18, GC
9 1307694C1 2 CLAMP – tube retaining
10 433-832 2 BOLT – carriage, 1/2 NC x 2 inch
11 231-4118 2 NUT – hex, self-locking, 1/2 inch NC
13 1307688C2 6 SUPPORT – tube
14 477-73112 16 BOLT – serrated slotted truss head, 5/16 NC x 3/4 inch
15 231-5145 18 NUT – hex serrated flange, 5/16 inch NC
16 1313163C1 4 BRACKET – support
17 1313164C1 4 U-BOLT – bracket
18 231-4118 8 NUT – hex, self-locking, 1/2 inch NC
19 1316772C2 2 SUPPORT – wing, inner
20 1316826C1 2 PIPE – wing support, inner
21 1316773C2 2 SUPPORT – wing, outer
22 1307693C1 2 PIPE – wing support, outer
23 413-524 4 BOLT – hex, 5/16 NC x 1-1/2 inch
24 232-4115 4 NUT, LOCK, 5/16″-18, GC
25 1316201C1 2 SUPPORT – wing
26 1316649C1 2 POINT – wing
27 433-640 4 BOLT – carriage, 3/8 NC x 2-1/2 inch
28 231-4116 4 NUT – hex, self-locking, 3/8 inch NC
29 1307689C1 4 TUBE – wing, inner
33 1307684C1 2 CLAMP – tine
34 477-82512 4 BOLT – serrated slotted truss head, 1/4 NC x 3/4 inch
35 231-4144 4 NUT, LOCK, 1/4″-20, GB
36 140649A1 2 SUPPORT – divider
37 131686A1 2 ROD – divider
38 164191C1 2 SCREW – slotted truss head, 5/16 NC x 1-1/2 inch
40 700121908 2 SPACER – pipe, 1/4 x 3/8 inch
41 231-4116 2 NUT – hex, self-locking, 3/8 inch NC
1 1320298C3 1 TUBE – sensor, left-hand (15.0 foot)
1 1326819C3 1 TUBE – sensor, left-hand (16.5 foot)
1 1320299C3 1 TUBE – sensor, left-hand (17.5 foot)
1 1320300C3 1 TUBE – sensor, left-hand (20.0 foot)
1 1320301C3 1 TUBE – sensor, left-hand (22.5 foot)
1 1320302C3 1 TUBE – sensor, left-hand (25.0 foot)
1 1320303C3 1 TUBE – sensor, left-hand (30.0 foot)
2 1307604C2 1 TUBE – sensor, right-hand (15.0 foot)
2 1326820C2 1 TUBE – sensor, right-hand (16.5 foot)
2 1307605C2 1 TUBE – sensor, right-hand (17.5 foot)
2 1307606C2 1 TUBE – sensor, right-hand (20.0 foot)
2 1307607C2 1 TUBE – sensor, right-hand (22.5 foot)
2 1307608C2 1 TUBE – sensor, right-hand (25.0 foot)
2 1307609C2 1 TUBE – sensor, right-hand (30.0 foot), item # 2, if looking for upgrading spring kit, order p/n 341196A1
3 1316388C1 1 ARM – connector
4 413-528 2 BOLT – hex, 5/16 NC x 1-3/4 inch
5 232-4115 2 NUT, LOCK, 5/16″-18, GC
13 126339A1 1 ROD – indicator, no longer available order 126339A2
13 126339A2 1 ROD – indicator
14 1316572C1 1 PLUG – beveled
15 413-440 1 BOLT – hex, 1/4 NC x 2-1/2 inch
16 495-11028 1 WASHER – flat, 9/32 x 5/8 x 1/16 inch
17 1326543C1 1 CAP – indicator end
18 1308482C1 1 COLLAR – sensing tube
19 483-1254 1 SCREW – set, hex socket headless, 1/4 NC x 1/4 inch, cup pt
20 1320312C1 1 BRACKET – cable anchor
22 127360A2 1 POTENTIOMETER – height control
22 1301147C91 1 POTENTIOMETER – height control (For 1400 series combines with electrohydraulics)
23 495-11041 2 WASHER – flat, 13/32 x 13/16 x 1/16 inch
26 L18337 1 STRAP – tie, 15 inch, nylon
27 1968782C1 1 ARM – potentiometer control, powdered metal (Alternate with 131175A1)
27 131175A1 1 ARM – potentiometer control, molded plastic (Alternate with 1968782C1)
28 483-1084 1 SCREW – set, hex socket headless, No. 8 NC x 1/4 inch, cup point
29 1316427C3 1 CABLE – control
30 148151 1 CLIP – control cable
32 432-48 2 1/16″ x 1/2″
33 427-3058 1 PIN, CLEVIS, 3/16″ x .580″, Hardened
34 22906R1 1 PIN, HEADED, 1/4″ x 3/4″
35 1308301C1 1 BRACKET – mounting
36 409-7512 6 BOLT – hex serrated flange, 5/16 NC x 3/4 inch
37 231-5145 7 NUT – hex serrated flange, 5/16 inch NC
38 1308299C3 1 STRAP – potentiometer mounting
39 1320313C1 1 SUPPORT – linkage shield
40 434-512 1 BOLT – carriage, 5/16 NC x 3/4 inch
42 189956A1 1 SPACER – support, if used
1 1320304C1 1 LEVER – linkage arm
2 487704R1 1 SPACER – 3/4 x 1-3/16 inch
3 185062R1 1 BUSHING – spacer
4 495-81041 1 WASHER – flat, 25/32 x 1-1/2 x 1/16 inch
5 495-11053 1 WASHER, 1/2″, SAE (17/32″ x 1-1/16″ x 3/32″)
6 413-836 1 BOLT – hex, 1/2 NC x 2-1/4 inch
7 231-5148 1 NUT, Flg, USR, 1/2″-13
12 188981C91 2 CLEVIS – with clip
13 1320308C1 1 STUD – linkage rod
14 425-114 2 NUT, 1/4″-28, G5
15 27825R1 2 SPACER, 1/2″ Tube x 1/2″
16 409-7520 2 BOLT – hex serrated flange, 5/16 NC x 1-1/4 inch
17 231-5145 3 NUT – hex serrated flange, 5/16 inch NC
18 1308301C1 1 BRACKET – mounting
19 1320313C1 1 SUPPORT – linkage shield
20 434-512 1 BOLT – carriage, 5/16 NC x 3/4 inch
1 184853C1 1 DEFLECTOR – front, left-hand
2 184854C1 1 DEFLECTOR – front, right-hand
3 477-73112 11 BOLT – serrated slotted truss head, 5/16 NC x 3/4 inch
4 231-5145 11 NUT – hex serrated flange, 5/16 inch NC
5 181669C1 1 COVER – feeder adapter (1480 Combine)
5 1319220C1 1 COVER – feeder adapter (1420, 1440 and 1460 Combines)
1 1316998C2 1 DECAL – 1020, model number
2 1326215C1 2 DECAL – warning, keep drive line shields in place
3 1320694C3 2 DECAL – danger, rest the header on the ground
4 144385A1 2 DECAL – warning, shields are provided to guard
5 179245C1 1 DECAL – lubrication – 10 hours
6 179246C1 6 DECAL – lubrication – 50 hours
7 179244C1 4 DECAL – lubrication – 100 hours, if used
8 1316995C1 2 DECAL – warning, avoid serious injury, if usedl
10 185067A1 2 DECAL – warning, avoid injury, always lock both reel lift cylinders
2 1326216C1 1 DECAL – warning, keep drive line shields in place (French) language
3 1323199C2 2 DECAL – danger, rest the header on the ground (French) language
4 182191A2 2 DECAL – warning, shields are provided to guard these moving parts, French language
8 1326079C1 2 DECAL – warning, avoid serious injury (French), if used, language
10 185298A1 2 DECAL – warning, avoid injury, always lock both reel lift cylinders (French) language
10 185791A1 2 DECAL – warning, avoid injury, always lock both reel lift cylinders (Quebec) French language
2 1326217C1 1 DECAL – warning, keep drive line shields in place (Spanish) language
3 1323197C2 2 DECAL – danger, rest the header on the ground (Spanish) language
4 182192A2 2 DECAL – warning, shields are provided to guard these moving parts, Spanish language
8 1326080C1 2 DECAL – warning, avoid serious injury (Spanish), if used, language
10 185296A1 2 DECAL – warning, avoid injury, always lock both reel lift cylinders (Spanish) language
2 1326218C1 1 DECAL – warning, keep drive line shields in place (German) language
3 1323198C2 2 DECAL – danger, rest the header on the ground (German) language
4 1326078C1 2 DECAL – warning, shields are provided to guard (German) language
8 1326081C1 2 DECAL – warning, avoid serious injury (German), if used, language
10 185297A1 2 DECAL – warning, avoid injury, always lock both reel lift cylinders (German) language
2 103284A1 1 DECAL – warning, keep drive line shields in place (Italian) language
3 1345444C2 2 DECAL – danger, rest the header on the ground (Italian) language
4 1345445C1 2 DECAL – warning, shields are provided to guard (Italian) language
8 103287A1 2 DECAL – warning, avoid serious injury (Italian), if used, language
10 189990A1 2 DECAL – warning, avoid injury, always lock both reel lift cylinders (Italian), replaces 103286A1, languag
13 197105C2 1 DECAL – important, do not overlube, if used
14 1326072C1 2 DECAL – important, place auger lift link in rear hole
15 1284374C1 2 REFLECTOR – red
15 1284365C2 2 REFLECTOR – amber
17 1326519C1 2 DECAL – important, readjust auger idler, if used
18 1326523C1 1 DECAL – important, to adjust auger chain idler, if used
19 1326528C1 3 DECAL – danger, shield missing, do not operate
20 1326752C1 1 DECAL – lubrication instructions
21 1326579C1 1 DECAL – lubricate journal and bearing, if used
24 1326618C1 1 DECAL – drive identification
25 1326619C1 1 DECAL – fore/aft detent, if used
26 182142C1 1 DECAL – important, clean dirt from top of skids
27 1313194C1 1 DECAL – header height, if used
28 106081A1 1 DECAL – header height, if used
29 137708A1 1 DECAL – header height
13 1323213C1 1 DECAL – important, do not overlube (French), if used, language
14 1326073C1 2 DECAL – important, place auger lift link in rear hole (French) language
17 1326520C1 2 DECAL – important, readjust auger idler (French), if used, language
18 1326524C1 1 DECAL – important, to adjust auger chain idler (French), if used, language
19 1326529C1 2 DECAL – danger, shield missing, do not operate (French), if used, language
26 1323182C1 1 DECAL – important, clean dirt from top of skids (French) language
13 1323211C1 1 DECAL – important, do not overlube (Spanish), if used, language
14 1326074C1 2 DECAL – important, place auger lift link in rear hole (Spanish) language
17 1326521C1 2 DECAL – important, readjust auger idler (Spanish), if used, language
18 1326525C1 1 DECAL – important, to adjust auger chain idler (Spanish), if used, language
19 1326530C1 2 DECAL – danger, shield missing, do not operate (Spanish), if used, language
26 1323180C1 1 DECAL – important, clean dirt from top of skids (Spanish) language
13 1323212C1 1 DECAL – important, do not overlube (German), if used, language
14 1326075C1 2 DECAL – important, place auger lift link in rear hole (German) language
17 1326522C1 2 DECAL – important, readjust auger idler (German), if used, language
18 1326526C1 1 DECAL – important, to adjust auger chain idler (German), if used, language
19 1326531C1 2 DECAL – danger, shield missing, do not operate (German), if used, language
26 1323181C1 1 DECAL – important, clean dirt from top of skids (German) language
13 103288A1 1 DECAL – important, do not overlube (Italian), if used, language
14 103285A1 2 DECAL – important, place auger lift link in rear hole (Italian) language
17 103283A1 2 DECAL – important, readjust auger idler (Italian), if used, language
18 103282A1 1 DECAL – important, to adjust auger chain idler (Italian), if used, language
19 103281A1 2 DECAL – danger, shield missing do not operate (Italian), if used, language
26 103280A1 1 DECAL – important, clean dirt from top of skids (Italian) language

Leave a Reply

Your email address will not be published. Required fields are marked *