CASE 9300 Ecolo – Tiger Mulch Chisel
CASE 9300 Ecolo – Tiger Mulch Chisel — parts list
377 part numbers across 25 assemblies, transcribed from the catalogue above. Search this page for a part number to find the assembly it belongs to.
04-01 WARNING AND TAILLIGHT KIT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 27602313 | 1 | HARNESS, WIRE, Front |
| 3 | 27602224 | 1 | HARNESS, Rear |
| 4 | 27602201 | 2 | LIGHT ASSY., Amber |
| 5 | 27602202 | 2 | LIGHT ASSY., Red |
| 6 | 413-420 | 16 | BOLT, Hex, 1/4″-20 x 1 1/4″, G5 |
| 7 | 413-412 | 2 | BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd |
| 8 | 86992211 | 18 | NUT, LOCK, 1/4, NC, Stover |
| 11 | 27601214 | 1 | HOLDER, Plug Storage |
| 12 | 87454251 | 1 | BRACKET, Light Arm, Rh, Inc. 17 – 19, Used On 2006 And Prior Models |
| 13 | 87454250 | 1 | BRACKET, Light Arm, Lh, Incl 17 – 19, Used On 2006 And Prior Models |
| 14 | 27602400 | 2 | SUPPORT, Light Bracket, Short, Used On 2006 And Prior Models |
| 15 | 27602410 | 1 | BRACKET, Light Assembly, Lh, Inc. 16 – 19, Short, Used On 2006 And Prior Models |
| 15 | 87328901 | 1 | BRACKET, Light Assembly, Lh, Inc. 16 – 19, Short, Used On 2007 And After Models |
| 15 | 27602415 | 1 | BRACKET, Light Bracket, Rh, Inc. 16 – 19, Short, Used On 2006 And Prior Models |
| 15 | 87328899 | 1 | BRACKET, Light Bracket, Rh, Inc. 16 – 19, Short, Used On 2007 And After Models |
| 16 | 87328897 | 1 | BRACKET, Light Bracket, Rh, Inc. 17 – 19, Long, Used On 2007 And After Models |
| 16 | 87328898 | 1 | BRACKET, Light Bracket, Lh, Inc. 17 – 19, Long |
| 17 | 311863A1 | 4 | REFLECTOR, Red |
| 18 | 311865A1 | 4 | REFLECTOR, Flourescent |
| 19 | 311864A1 | 4 | REFLECTOR, Yellow |
| 20 | 413-1028 | 4 | BOLT, Hex, 5/8″-11 x 1 3/4″, G5 |
| 21 | 16309091 | 2 | U-BOLT, 3/8 x 4 x 4 |
| 22 | 86992216 | 4 | NUT, LOCK, 5/8, NC, Hex |
| 23 | 86992213 | 4 | NUT, LOCK, 3/8, Stover |
| 24 | 413-616 | 2 | BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd |
| 25 | 87039402 | 2 | NUT, LOCK, 3/8″-16, GB |
08-01 MAIN FRAME HYDRAULICS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 25330081 | 1 | CYLINDER ASSY., 3 x 8, 3000 p.s.i. |
| 2 | 25335162 | 2 | CYLINDER ASSY., 3-1/2 x 16, 3000 p.s.i. |
| 3 | 25340123 | 2 | CYLINDER ASSY., 4 x 12, 3000 p.s.i. |
| 4 | 25610701 | 2 | HOSE ASSY., 3/8 x 310 |
| 5 | 25610849 | 2 | HOSE ASSY., 1/2 x 260 |
| 6 | 25610709 | 2 | HOSE ASSY., 3/8 x 233 |
| 7 | 25610710 | 2 | HOSE ASSY., 3/8 x 164 |
| 8 | 25600607 | 2 | HOSE ASSY., 3/8 x 76 |
| 9 | 25600670 | 2 | HOSE ASSY., 3/8 x 68 |
| 10 | 25600735 | 2 | HOSE ASSY., 3/8 x 82 |
| 11 | 25600643 | 1 | HOSE ASSY., 3/8 x 44-1/2 |
| 12 | 25600622 | 1 | HOSE ASSY., 3/8 x 22 |
| 13 | 25600711 | 1 | HOSE ASSY., 3/8 x 93 |
| 14 | 25600692 | 2 | HOSE ASSY., 3/8 x 108 |
| 15 | 25600607 | 3 | HOSE ASSY., 3/8 x 76 |
| 16 | 25600720 | 1 | HOSE ASSY., 3/8 x 90 |
| 17 | 25600662 | 1 | HOSE ASSY., 3/8 x 72 |
| 18 | 25600681 | 2 | HOSE ASSY., 3/8 x 121 |
| 19 | 25600726 | 1 | HOSE ASSY., 3/8 x 130-1/2 |
| 20 | 25600716 | 1 | HOSE ASSY., 3/8 x 139-1/2 |
| 22 | 22510700 | 12 | CLAMP, HOSE, 5/8 |
| 23 | 22510710 | 5 | CLAMP, HOSE, 3/4 |
| 24 | 06200125 | 8 | CLAMP, HOSE |
| 25 | 22530601 | 2 | CLAMP, HOSE, Double |
| 26 | 25405013 | 2 | VALVE, CONTROL, Purple |
| 27 | 25707534 | 2 | ADAPTER, 3/4 SAEM x 3/4 JICF |
| 28 | 218-594 | 8 | TEE, 3/4″-16, 37є |
| 29 | 218-5183 | 4 | TEE, 3/4″-16, 37є x 3/4″-16, O-Ring Br |
| 30 | 218-5106 | 5 | ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, O-Ring |
| 31 | 218-5136 | 1 | ELBOW, 45є, 3/4″-16, 37є x 3/4″-16, O-Ring |
| 32 | 218-5230 | 4 | ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, 37є Fem Sw |
| 33 | 09967021 | 2 | KIT, Cylinder Stop |
| 34 | 14810251 | 5 | PIN, HEADED, 5/8 x 3-1/8, Clevis |
| 35 | 14720411 | 8 | PIN, SPLIT (COTTER), 1/8 x 2, Hair |
| 36 | 413-664 | 2 | BOLT, Hex, 3/8″-16 x 4″, G5 |
| 38 | 413-624 | 2 | BOLT, Hex, 3/8″-16 x 1 1/2″, G5 |
| 39 | 86992213 | 17 | NUT, LOCK, 3/8, NC, Stover |
| 40 | 134-3 | 3 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 2″, G2, Full Thd |
| 41 | 433-616 | 5 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5 |
| 45 | 25800010 | 1 | CYLINDER, Stroke Control, 1-1/4 |
| 46 | 09900240W | 1 | KIT, Stroke Control, 1-1/2, Red |
| 47 | 09967003W | 1 | KIT, Stroke Control, Large, Red |
| 48 | 09650207 | 1 | STAY, Cylinder |
| 49 | 25705041 | 8 | COUPLING, Male ISO, 3/4 SAEF, Hydraulic |
08-02 DISC HYDRAULICS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 25330160 | 2 | CYLINDER ASSY., 3 x 16, 3000 p.s.i. |
| 2 | 25610709 | 2 | HOSE ASSY., 3/8 x 233 |
| 3 | 25600670 | 2 | HOSE ASSY., 3/8 x 68 |
| 4 | 25600664 | 2 | HOSE ASSY., 3/8 x 60 |
| 5 | 25600614 | 2 | HOSE ASSY., 3/8 x 36 |
| 6 | 218-594 | 4 | TEE, 3/4″-16, 37є |
| 7 | 218-5106 | 4 | ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, O-Ring |
| 8 | 06200125 | 2 | CLAMP, HOSE |
| 9 | 22510710 | 3 | CLAMP, HOSE, Cushioned, 1/2 ID, Main Lift |
| 10 | 86992213 | 2 | NUT, LOCK, 3/8, NC, Stover |
| 11 | 413-636 | 2 | BOLT, Hex, 3/8″-16 x 2 1/4″, G5 |
| 12 | 433-616 | 4 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5 |
| 13 | 86992213 | 7 | NUT, LOCK, 3/8, NC, Stover |
| 14 | 25405013 | 2 | VALVE, CONTROL, Purple |
| 15 | 25707534 | 2 | ADAPTER, 3/4 SAEM x 3/4 JICF |
| 16 | 134-3 | 3 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 2″, G2, Full Thd |
| 17 | 22510700 | 7 | CLAMP, HOSE, Cushioned, 5/8 ID |
| 18 | 25705041 | 2 | COUPLING, Male, ISO 3/4 SAEF, Hydraulic |
08-03 HYDRAULIC CYLINDER ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 25330081 | 1 | CYLINDER ASSY., 3 x 8, 20-1/4 Closed, Disc Lift |
| 1 | 25330160 | 1 | CYLINDER ASSY., 3 x 16, 26-1/4 Closed, Disc Fold |
| 1 | 25335162 | 1 | CYLINDER ASSY., 3-1/2 x 16, 26-1/4 Closed, Main Frame Wing Fold |
| 1 | 25340123 | 1 | CYLINDER ASSY., 4 x 12, 22-1/4 Closed, Main Lift |
| 1 | 25330083 | 1 | CYLINDER ASSY., 3 x 8, With Stop, 20-1/4 Closed, Disc Leveler Lift |
| 1 | 25330101 | 1 | CYLINDER, 3 x 10, 20-1/4 Closed, Disc Leveler Wing Lift |
| 2 | 25833007 | 1 | KIT, SEALS, 3, Disc Lift, Disc Fold, Disc Leveler, And Disc Leveler Wing Lift |
| 2 | 25833527 | 1 | SEAL, HYD-CYLINDER, 3-1/2, Main Frame Wing Fold |
| 2 | 25834024 | 1 | SEAL, HYD-CYLINDER, 4, Main Lift |
| 3 | 25890100 | 1 | KIT, 1, Bag Of Parts, Disc Lift, Disc Fold, And Mainframe Wing Fold |
| 3 | 14820241 | 1 | CLEVIS, 1-1/4 x 3, Main Lift |
08-04 DISC LEVELER HYDRAULICS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 25330083 | 2 | CYLINDER ASSY., 3 x 8, 3000 P.S.I. |
| 2 | 25330101 | 2 | CYLINDER, 3 x 10, 3000 P.S.I. |
| 3 | 25600681 | 2 | HOSE ASSY., 3/8 x 121 |
| 4 | 25600692 | 2 | HOSE ASSY., 3/8 x 108 |
| 5 | 25600643 | 1 | HOSE ASSY., 3/8 x 44-1/2, Rh |
| 5 | 25600711 | 1 | HOSE ASSY., 3/8 x 93, Lh |
| 6 | 25600622 | 1 | HOSE ASSY., 3/8 x 22, Rh |
| 6 | 25600662 | 1 | HOSE ASSY., 3/8 x 72, Lh |
| 7 | 25600607 | 1 | HOSE ASSY., 3/8 x 75, Rh |
| 7 | 25600726 | 1 | HOSE ASSY., 3/8 x 130-1/2, Lh |
| 8 | 25600720 | 1 | HOSE ASSY., 3/8 x 90, Rh |
| 8 | 25600716 | 1 | HOSE ASSY., 3/8 x 139-1/2, Lh |
| 9 | 218-5230 | 2 | ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, 37є Fem Sw |
| 10 | 218-5183 | 4 | TEE, 3/4″-16, 37є x 3/4″-16, O-Ring Br |
| 11 | 218-594 | 4 | TEE, 3/4″-16, 37є |
| 12 | 218-5106 | 8 | ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, O-Ring |
| 13 | 25890100 | 2 | KIT, 1, Bag of Parts |
| 14 | 432-1624 | 8 | PIN, SPLIT (COTTER), 1/4″ x 1 1/2″ |
| 15 | 25707534 | 2 | ADAPTER, 3/4 SAEM x 3/4 JICF |
| 16 | 25405013 | 2 | VALVE, CONTROL, Purple |
09-01 MAIN FRAME ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87409675 | 1 | BAR ASSY., Pull Frame |
| 2 | 87522029 | 1 | Main Frame, Parabolic, S/B |
| 2 | 87522025 | 1 | Main Frame, Parabolic, A/R |
| 2 | 87522029 | 1 | Main Frame, MRD, S/B |
| 2 | 87522025 | 1 | Main Frame, MRD, A/R |
| 3 | 09967550 | 1 | ARM, Wheel Pedestal With Hub And Spindle, Q871, Rh |
| 3 | 09967570 | 1 | ARM, Wheel Pedestal With Hub And Spindel, Q871, Lh |
| 4 | 09967530 | 1 | FRAME ASSY, Pivot |
| 5 | 05302150 | 1 | STAND, Swinging Hose |
| 6 | 09983458 | 1 | BAR ASSY., Mount |
| 7 | 09900085 | 1 | SPRING BOX, Relief Assembly |
| 8 | 09983920 | 1 | BAR ASSY., Lift Link |
| 9 | 20092310 | 1 | CLEVIS, Combo |
| 10 | 32230000 | 1 | JACK, 3000#, Swivel |
| 11 | 09984470 | 1 | BAR ASSY., Torque |
| 13 | 30026030 | 1 | TUBE, Canister |
| 15 | 214-1452 | 1 | CLAMP, HOSE, #52, 2.81/3.75 Type F Worm |
| 17 | 10113225 | 2 | WHEEL, LAND, 22.5 x 13, Silver |
| 18 | 10016225 | 2 | WHEEL, LAND, 22.5 x 13, Assembly, Silver |
| 19 | 20090133 | 2 | HINGE, Double Casting |
| 20 | 24162506 | 2 | SPRING, Compression |
| 21 | 24143816 | 2 | SPRING, Compression |
| 22 | 16510820 | 2 | ROD, THREADED, 5/8, Dia |
| 23 | 06200125 | 2 | CLAMP, HOSE |
| 24 | 28087102 | 2 | HUB ASSY., Q871, With Spindle |
| 25 | 09967531 | 1 | BRACKET, Klik Pin |
| 26 | 04681210 | 1 | BRACKET |
| 27 | 14820520 | 1 | PIN, HITCH, 1-5/8 Dia. x 8.06 |
| 28 | 14810251 | 1 | PIN, HEADED, 5/8 Dia x 3-1/2 |
| 29 | 14816201 | 2 | PIN, SMALL, 1 Dia x 2.094 |
| 30 | 09983475 | 2 | BAR ASSY., Weldment |
| 31 | D33805 | 1 | PIN, 7/16 x 2.0, Klik |
| 32 | 14720411 | 1 | PIN, SPLIT (COTTER), 1/8 x 2.0, Hair |
| 33 | 432-1624 | 2 | PIN, SPLIT (COTTER), 1/4″ x 1 1/2″ |
| 34 | 04681211 | 1 | BUSHING, 1-3/4 OD x 1.030 ID x 1-1/8 |
| 35 | 17627010 | 2 | BUSHING, 1-5/8 ID, Machinery, 14 ga |
| 36 | 495-21069 | 4 | WASHER, 5/8″ |
| 38 | 44006200 | 4 | BUSHING, 1-1/8 OD x .645 ID x .620 |
| 39 | 87389757 | 1 | CHAIN, 30,400 lb, ASAE Safety |
| 40 | 17620020 | 1 | BUSHING, 1-1/4, Machinery, 14 ga |
| 41 | 14892066 | 1 | PIN, 1-1/4 x 8.60, With Hole |
| 42 | 413-1648 | 1 | BOLT, Hex, 1″-8 x 3″, G5 |
| 43 | 413-648 | 2 | BOLT, Hex, 3/8″-16 x 3″, G5 |
| 44 | 16901025 | 2 | SCREW, 5/8 x 7-1/2, NC, Hex, gd 5 |
| 45 | 413-1448 | 8 | BOLT, Hex, 7/8″-9 x 3″, G5 |
| 46 | 413-880 | 1 | BOLT, Hex, 1/2″-13 x 5″, G5 |
| 47 | 413-1032 | 1 | BOLT, Hex, 5/8″-11 x 2″, G5 |
| 48 | 413-740 | 1 | BOLT, Hex, 7/16″-14 x 2 1/2″, G5 |
| 49 | 86992219 | 1 | NUT, LOCK, 1, NC, Stover, ZP |
| 50 | 86992213 | 2 | NUT, LOCK, 3/8, NC, Stover, ZP |
| 51 | 86992216 | 10 | NUT, LOCK, 5/8, NC, Stover |
| 52 | 425-1014 | 8 | NUT, 7/8″-9, G5 |
| 53 | 86992218 | 2 | NUT, LOCK, 7/8, NC, Stover |
| 54 | 86992215 | 1 | NUT, LOCK, 1/2, NC, Stover |
| 55 | 425-1010 | 1 | NUT, 5/8″-11, G5 |
| 56 | 86992217 | 1 | NUT, LOCK, 7/16, NC, Stover |
| 57 | 219-86 | 9 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive |
| 58 | 425-1414 | 6 | NUT, Jam, 7/8″-9, G5 |
| 60 | 18534140 | 1 | DECAL, Warning |
| 61 | 18534107 | 1 | DECAL, Patent |
| 62 | 18534134 | 1 | DECAL, Warning, Towing |
| 63 | 18534228 | 1 | DECAL, Caution |
| 64 | 18534262 | 1 | DECAL, Level Frame |
| 65 | 18534333 | 1 | DECAL, Danger |
| 66 | 18534277 | 1 | DECAL, Warning |
| 67 | 18534241 | 1 | DECAL, Instruction |
| 68 | 18534258 | 1 | DECAL, Depth Indicator |
| 69 | 87457430 | 1 | DECAL, 9300 Case IH, Lh |
| 70 | 87457429 | 1 | DECAL, 9300 Case IH, Rh |
| 71 | 18534287 | 1 | DECAL, Information, Wheel |
| 72 | 425-106 | 2 | NUT, 3/8″-16, G5 |
| 73 | 413-616 | 2 | BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd |
| 74 | 09967270 | 1 | BRACKET, Mud Scraper, Rh |
| 74 | 09967280 | 1 | BRACKET, Mud Scraper, Lh |
| 75 | 413-1240 | 4 | BOLT, Hex, 3/4″-10 x 2 1/2″, G5 |
| 76 | 425-1012 | 4 | NUT, 3/4″-10, G5 |
| 77 | 18581002 | 1 | PRODUCT GRAPHIC, SMV, 9300 With Leveler, Inc. 50 And 78 – 80 |
| 78 | 09102450 | 1 | INDICATOR, Leveler Depth |
| 79 | 413-616 | 2 | BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd |
| 80 | 495-21044 | 2 | WASHER, 3/8″ |
| 81 | 311864A1 | 1 | REFLECTOR, Amber |
| 82 | 18581000 | 1 | PRODUCT GRAPHIC, SMV, 9300 Without Leveler, Inc. 79 – 80 And 83 – 86 |
| 83 | 311860A1 | 1 | EMBLEM, SMV |
| 84 | 06000099 | 1 | BRACE, SMV |
| 85 | 86992211 | 2 | NUT, LOCK, 1/4, NC, Stover |
| 86 | 413-412 | 2 | BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd |
| 87 | 14892685 | 2 | PIN, SPECIAL, 1-5/8 x 10.88 |
| 88 | 14892692 | 2 | PIN, SPECIAL, 1-5/8 x 14.12 |
| 89 | 413-852 | 4 | BOLT, Hex, 1/2″-13 x 3 1/4″, G5 |
| 90 | 87333862 | 4 | NUT, LOCK |
| 91 | 09967155 | 6 | SHIM, Wing |
| 92 | 413-1024 | 2 | BOLT, Hex, 5/8″-11 x 1 1/2″, G5, Full Thd |
| 93 | 87558404 | 2 | DECAL, Case IH |
09-02 MAIN FRAME WING
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87409605 | 1 | BAR ASSY., Main Frame, Lh, Shown |
| 1 | 87409608 | 1 | BAR ASSY., Main Frame, Rh |
| 2 | 09967080 | 1 | BRACKET, Gauge Wheel, Lh, 783 Hub |
| 2 | 09967085 | 1 | BRACKET, Gauge Wheel, Rh, 783 Hub |
| 3 | 32253000 | 1 | JACK ASSY., 5000 lb, Gauge Wheel |
| 4 | 10010254 | 1 | WHEEL ASSY., 12.5L x 15 SL, 8-Ply, Silver |
| 5 | 413-1056 | 1 | BOLT, Hex, 5/8″-11 x 3 1/2″, G5 |
| 6 | 413-1032 | 1 | BOLT, Hex, 5/8″-11 x 2″, G5 |
| 7 | 86992216 | 2 | NUT, LOCK, 5/8, Hex, Stover |
| 8 | 14820421 | 1 | CLEVIS, 1-1/4 x 5-1/4, Pin |
| 9 | A30338 | 1 | PIN, 1/4 x 1-3/4, Klik |
| 10 | 18534307 | 1 | DECAL, Helping Plants Thrive |
| 13 | 311864A1 | 1 | REFLECTOR, Yellow |
| 14 | 18532035 | 1 | DECAL, Tiger Stripe |
| 15 | 10110254 | 1 | WHEEL ASSY., 10 x 15, 6-Hole, Silver |
| 17 | 14892685 | 1 | PIN, SPECIAL, 1-5/8 x 10.88 |
| 18 | 14892692 | 1 | PIN, SPECIAL, 1-5/8 x 14.12 |
| 19 | 413-852 | 2 | BOLT, Hex, 1/2″-13 x 3 1/4″, G5 |
| 20 | 86992215 | 2 | NUT, LOCK, 1/2, NC, Stover |
09-03 DISC ATTACHMENT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87445413 | 1 | FRAME, DRAWBAR, Center Disc, Used On 2002 And Later Models |
| 1 | 09967230W | 1 | TUBE ASSY., Center Disc, Used On Prior To 2002 Models |
| 2 | 87409682 | 1 | BAR ASSY., Disc Frame, Rh, Used On 2002 And Later Models |
| 2 | 09967220W | 1 | TUBE ASSY., Disc Frame, Rh, Used On Prior To 2002 Models |
| 3 | 87409693 | 1 | BAR ASSY., Disc Frame, Lh, Used On 2002 And Later Models |
| 3 | 09967210W | 1 | TUBE ASSY., Disc Frame, Lh, Used On Prior To 2002 Models |
| 4 | 87409675 | 1 | BAR ASSY., Pull |
| 5 | 09967264 | 2 | BRACKET, Link, Outer, With Instructions |
| 6 | 09967251 | 2 | BRACKET, Link, Center |
| 7 | 14892077 | 4 | PIN, SPECIAL, 1-1/4 x 7.50 |
| 8 | 86992219 | 4 | NUT, LOCK, 1, Stover |
| 9 | 14891663 | 6 | PIN, HITCH, 1 x 6-3/4 |
| 10 | 413-1032 | 4 | BOLT, Hex, 5/8″-11 x 2″, G5 |
| 11 | 413-740 | 4 | BOLT, Hex, 7/16″-14 x 2 1/2″, G5 |
| 12 | 86992216 | 4 | NUT, LOCK, 5/8, Stover |
| 13 | 86992214 | 4 | NUT, LOCK, 7/16, NC, Stover |
| 16 | 432-1632 | 12 | PIN, SPLIT (COTTER), 1/4″ x 2″ |
| 17 | 425-1016 | 4 | NUT, 1″-8, G5 |
| 18 | 219-86 | 4 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive |
| 19 | 09661456 | 8 | SHIM |
| 20 | 25330160 | 2 | CYLINDER ASSY., 3 x 16, 3000 P.S.I. |
| 21 | 311864A1 | 2 | REFLECTOR, Yellow |
| 22 | 18534227 | 3 | DECAL, Danger |
| 24 | 18534223 | 1 | DECAL, Torque |
| 25 | 16901623 | 4 | BOLT, 1 x 5-1/4, NC, Hex, A-325 |
09-04 AUTO-RESET ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 09984675 | 1 | SPRING BOX, Auto-Reset Canister |
| 2 | 09984650 | 1 | LINK/SHACKLE, Auto-Reset |
| 3 | 20090090 | 4 | SPRING BOX, Casting |
| 4 | 24162501 | 2 | SPRING, COIL, Compression |
| 5 | 09984645 | 1 | BEAM ASSY., Inc. 39 And 41 |
| 6 | 09983476 | 1 | SHANK, Hard Surfaced, Inc. 40 |
| 20 | 16901225 | 2 | SCREW, 3/4 x 6-1/2, NC, Hex, gd 5 |
| 21 | 17413011 | 4 | WASHER, SPECIAL, 3/4, Standard |
| 22 | 219-87 | 2 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 23 | 219-86 | 1 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive, Self Tapping |
| 24 | 219-40 | 1 | NIPPLE, LUBE, 65є, 1/8″ NPT x 7/8″ lg, Self Tapping |
| 25 | 17616020 | 2 | WASHER, 1, Dia., Machine, 14 ga |
| 26 | 425-1012 | 1 | NUT, 3/4″-10, G5, Hex |
| 27 | 413-1248 | 2 | BOLT, Hex, 3/4″-10 x 3″, G5 |
| 28 | 17627010 | 2 | BUSHING, 1-5/8, Dia, 14 ga |
| 29 | 14892671 | 1 | PIN, SPECIAL, 1-5/8, Dia, H.T. |
| 30 | 14891665 | 1 | PIN, HITCH, 1, Dia |
| 31 | 413-636 | 1 | BOLT, Hex, 3/8″-16 x 2 1/4″, G5 |
| 32 | 86992213 | 1 | NUT, LOCK, 3/8, NC, Stover |
| 33 | 413-848 | 1 | BOLT, Hex, 1/2″-13 x 3″, G5 |
| 34 | 86992215 | 1 | NUT, LOCK, 1/2, NC, Stover |
| 35 | 413-1080 | 1 | BOLT, Hex, 5/8″-11 x 5″, G5 |
| 36 | 16902016 | 1 | BOLT, 1-1/4 x 4, NC Hex, gd 5 |
| 37 | 25-1420 | 1 | NUT, Jam, 1 1/4″-7, G5 |
| 38 | 86992216 | 1 | NUT, LOCK, 5/8, NC, Stover |
| 39 | 44006520 | 2 | BUSHING, LARGE, 1-5/16 |
| 40 | 44006530 | 1 | BUSHING, LARGE, 1-1/2 |
| 41 | 44016250 | 2 | SPACER, 1-5/8 |
| 42 | 311864A1 | 2 | REFLECTOR, Yellow |
| 43 | 09900099 | 1 | SHANK, BUCKET TOOTH, A/R Assembly, Not Shown |
09-05 SHEAR BOLT ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 09967360 | 1 | BEAM ASSY., Shear Bolt, Less Shank |
| 2 | 09983476 | 1 | SHANK, Hard Surfaced, Inc. 20 |
| 4 | 87460074 | 1 | SHANK, POINT RIPPER, 7, Tiger Assembly |
| 4 | 87460072 | 1 | SHANK, POINT RIPPER, 10, Tiger Assembly |
| 6 | 09907002 | 1 | FRAME, Rh, Wing, Inc. 22 And 24 |
| 7 | 09907003 | 1 | FRAME, Lh, Wing, Inc. 22 And 24 |
| 9 | 87460071 | 1 | SHANK, POINT RIPPER, 2, Straight Assembly |
| 10 | 14892671 | 1 | PIN, SPECIAL, 1-5/8 |
| 11 | 14891665 | 1 | PIN, HITCH, 1 |
| 12 | 413-1080 | 2 | BOLT, Hex, 5/8″-11 x 5″, G5 |
| 13 | 16902016 | 1 | BOLT, 1-1/4 x 4, NC, Hex, gd 5 |
| 14 | 25-1420 | 1 | NUT, Jam, 1 1/4″-7, G5 |
| 15 | 86992216 | 1 | NUT, LOCK, 5/8, NC, Stover |
| 16 | 25-1620 | 2 | NUT, 1 1/4″-7, G5, Hvy |
| 17 | 17616020 | 2 | WASHER, 1, Machine |
| 18 | 17627010 | 2 | BUSHING, 1-5/8, Machine, 10 ga |
| 19 | 44006520 | 2 | BUSHING, LARGE, 1-5/16 |
| 20 | 44006530 | 1 | BUSHING, LARGE, 1-1/2 |
| 21 | 413-844 | 1 | BOLT, Hex, 1/2″-13 x 2 3/4″, G5 |
| 22 | 16208065 | 4 | BOLT, PLOW, 1/2 x 1-1/2, NC |
| 23 | 413-848 | 1 | BOLT, Hex, 1/2″-13 x 3″, G5 |
| 24 | 425-108 | 1 | NUT, 1/2″-13, G5 |
| 25 | 425-168 | 1 | NUT, 1/2″-13, G5, Hvy |
| 26 | 495-21056 | 1 | WASHER, 1/2″, Standard |
| 27 | 87460159 | 1 | SHANK, POINT RIPPER, Replacable Tip Tiger |
| 28 | 245466A1 | 1 | SPLIT PIN/SAFETY PIN, 3/8, Flex |
| 29 | 87412311 | 1 | TIP, Replaceable, Inc. 28 |
| 30 | 87460073 | 1 | SHANK, POINT RIPPER, Replacable Point Base, Inc. 23, 25, And 26 |
| 31 | 86512371 | 4 | NUT, Flg, USR, 1/2″-13 |
| 32 | 87460158 | 1 | SHANK, POINT RIPPER, 7, Replaceable Tip Assembly |
| 33 | 413-836 | 1 | BOLT, Hex, 1/2″-13 x 2 1/4″, G5 |
| 34 | 09983485 | 1 | SHANK, MRD, Assembly, Inc. 35 – 37 |
| 35 | 09581761 | 1 | BAR ASSY., Wedge, MRD |
| 36 | 413-840 | 1 | BOLT, Hex, 1/2″-13 x 2 1/2″, G5 |
| 37 | 86992215 | 1 | NUT, LOCK, 1/2, NC, Stover |
| 38 | 413-636 | 1 | BOLT, Hex, 3/8″-16 x 2 1/4″, G5 |
| 39 | 86992213 | 1 | NUT, LOCK, 3/8, Stover |
| 40 | 413-848 | 1 | BOLT, Hex, 1/2″-13 x 3″, G5 |
| 41 | 86992215 | 1 | NUT, LOCK, 1/2, Stover |
| 42 | 311864A1 | 2 | REFLECTOR, Yellow |
09-06 CUSHION DISC MOUNT ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 3 | 09987801 | 1 | BRACKET |
| 3 | 87436346 | 1 | PLATE, SUPPORT, Center Mount Only |
| 4 | 33090001 | 1 | HANGER, Bearing, Painted |
| 7 | 87427186 | 1 | U-BOLT, 3/4 x 6.18 |
| 9 | 86992217 | 9 | NUT, LOCK, 3/4, NC, Stover |
| 10 | 432-1024 | 1 | PIN, SPLIT (COTTER), 5/32″ x 1 1/2″ |
| 11 | 21932120 | 1 | SEAL, Retainer |
| 12 | 663557R91 | 1 | BEARING, CONE, 1.625, Timken LM501349 |
| 13 | 663558R1 | 1 | BEARING, CUP, 2.892, Timken LM501310 |
| 14 | 28705012 | 1 | HUB ASSY., With Cups |
| 15 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 16 | 413-58 | 1 | BOLT, Hex, 5/16″-18 x 1/2″, G5, Full Thd |
| 17 | 87541117 | 1 | DUST CAP, Dust Cap |
| 18 | 651817R1 | 1 | BEARING, CUP, 2.33, Timken LM67010 |
| 19 | 651818R91 | 1 | BEARING, CONE, 1.25, Timken LM67048 |
| 21 | 425-1314 | 1 | NUT, SLOTTED, 7/8″-14, G5 |
| 22 | 28490001 | 1 | HUB CAP |
| 23 | 426-832 | 5 | BOLT, Hex, 1/2″-13 x 2″, G8 |
| 24 | 17409010 | 5 | WASHER, 9/16 x 1-3/8 OD, Special |
| 25 | 86992215 | 1 | NUT, LOCK, 1/2, NC, Stover |
| 26 | 413-1248 | 1 | BOLT, Hex, 3/4″-10 x 3″, G5 |
| 26 | 420-21248 | 1 | BOLT, PLOW, 3/4″-10 x 3″, G8 |
| 27 | 413-1256 | 2 | BOLT, Hex, 3/4″-10 x 3 1/2″, G5 |
| 27 | 413-1248 | 2 | BOLT, Hex, 3/4″-10 x 3″, G5, For Use With Stop |
| 28 | 28199902 | 1 | HUB ASSY., Complete |
09-07 RIGID DISC MOUNT ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 4 | 21932120 | 1 | SEAL, Retainer |
| 5 | 663557R91 | 1 | BEARING, CONE, 1.62, Timken LM501349 |
| 6 | 663558R1 | 1 | BEARING, CUP, 2.89 OD, Timken LM501310 |
| 7 | 28705011 | 1 | HUB ASSY., With Cups |
| 8 | 87541117 | 1 | DUST CAP, Dust Cap |
| 9 | 413-58 | 1 | BOLT, Hex, 5/16″-18 x 1/2″, G5, Full Thd |
| 10 | 651817R1 | 1 | BEARING, CUP, 2.33 OD, Timken LM67010 |
| 11 | 651818R91 | 1 | BEARING, CONE, 1.25, Timken LM67048 |
| 13 | 425-1314 | 1 | NUT, SLOTTED, 7/8″-14, G5 |
| 14 | 432-1024 | 1 | PIN, SPLIT (COTTER), 5/32″ x 1 1/2″, 5/32″ x 1 1/2″ |
| 15 | 28490001 | 1 | HUB CAP |
| 16 | 426-832 | 5 | BOLT, Hex, 1/2″-13 x 2″, G8 |
| 17 | 17409010 | 5 | WASHER, 9/16 ID x 1-3/8 OD, Special |
| 18 | 86992215 | 5 | NUT, LOCK, 1/2, NC, Hex, Stover |
| 19 | 87427186 | 2 | U-BOLT, 3/4, NC 6.18, Square |
| 20 | 425-1012 | 4 | NUT, 3/4″-10, G5 |
| 21 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 22 | 28199902 | 1 | HUB ASSY., Complete |
09-08 LEAD SHANK ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 09984810 | 1 | BAR ASSY., Lead Shank, Beam |
| 2 | 09984820 | 1 | SHANK, Mount |
| 3 | 33010010 | 1 | SHANK, Heat Treated |
| 4 | 87460075 | 1 | SHANK, POINT RIPPER, , Does Not Include Hardware |
| 5 | 09984815 | 1 | SPRING, Assembly |
| 6 | 20090133 | 2 | HINGE, Double, Casting |
| 7 | 24162506 | 2 | SPRING, Compression |
| 8 | 16510720 | 2 | ROD, 5/8, Threaded |
| 9 | 09561200 | 1 | PLATE |
| 10 | 87460070 | 1 | SHANK, POINT RIPPER, 7, Tiger, Does Not Include Hardware |
| 11 | 87460158 | 1 | SHANK, POINT RIPPER, 7, Replacable Tip Tiger, Does Not Include Hardware |
| 12 | 245466A1 | 1 | SPLIT PIN/SAFETY PIN, 3/8, Flex |
| 13 | 87412311 | 1 | TIP, Replacable |
| 14 | 09900012 | 1 | SHANK, Complete Lead, Less Point |
| 20 | 87427193 | 2 | BOLT, SPECIAL, 3/4, NC x 7-9/16, Square |
| 21 | 16901435 | 1 | BOLT, 7/8 x 7-3/4, NC, Hex, gd 5 |
| 22 | 16901025 | 2 | SCREW, 5/8 x 7-1/2, NC, Hex, gd 5 |
| 23 | 413-1072 | 1 | BOLT, Hex, 5/8″-11 x 4 1/2″, G5, Shear |
| 24 | 16901215 | 1 | BOLT, 3/4 x 3-3/4, NC, A325 |
| 25 | 413-836 | 1 | BOLT, Hex, 1/2″-13 x 2 1/4″, G5 |
| 26 | 44006511 | 4 | BUSHING, LARGE, 5/8, Serrated, Painted |
| 27 | 44006200 | 2 | BUSHING, H.T., Painted |
| 28 | 51200158 | 2 | BUSHING, 7/8, ID, Hardened |
| 29 | 80299 | 4 | WASHER, 5/8″, Standard |
| 30 | 17414012 | 1 | WASHER, 7/8, ID |
| 31 | 425-108 | 1 | NUT, 1/2″-13, G5, Hex |
| 33 | 86992216 | 1 | NUT, LOCK, 7/8, NC, Hex |
| 34 | 425-1010 | 3 | NUT, 5/8″-11, G5 |
| 35 | 425-1012 | 5 | NUT, 3/4″-10, G5, Hex |
| 37 | 25-1010 | 6 | NUT, 5/8″-11, G5 |
| 39 | 219-86 | 1 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive, Self-Tapping |
| 40 | 18534233 | 1 | DECAL, Shear Bolt, Obsolete |
09-09 6 AND 8 COVERING ATTACHMENTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 33310081 | 1 | LANDSIDE, 6, Covering Attachment With Hardware |
| 2 | 33310070 | 1 | MOLDBOARD, 8, Covering Attachment With Hardware |
| 3 | 09965000 | 1 | BRACKET, 1-1/2 Shank |
| 3 | 87442609 | 1 | BRACKET, 1-1/4 Shank |
| 4 | 413-844 | 2 | BOLT, Hex, 1/2″-13 x 2 3/4″, G5 |
| 5 | 420-2720 | 2 | BOLT, PLOW, 7/16″-14 x 1 1/4″, G8 |
| 6 | 425-108 | 2 | NUT, 1/2″-13, G5, Hex |
| 7 | 425-107 | 2 | NUT, 7/16″-14, G5, Hex |
| 8 | 81547 | 2 | WASHER, LOCK, 7/16″, , Does Not Include Hardware |
| 9 | 80700 | 2 | WASHER, 1/2″, Flat |
09-10 4 COVERING ATTACHMENT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 33310076 | 1 | LANDSIDE, 4, Covering With Hardware |
| 3 | 09965000 | 1 | BRACKET, 1-1/2 Shank |
| 3 | 87442609 | 1 | BRACKET, 1-1/4 Shank |
| 4 | 413-844 | 2 | BOLT, Hex, 1/2″-13 x 2 3/4″, G5 |
| 5 | 420-2720 | 2 | BOLT, PLOW, 7/16″-14 x 1 1/4″, G8 |
| 6 | 425-108 | 2 | NUT, 1/2″-13, G5 |
| 7 | 425-107 | 2 | NUT, 7/16″-14, G5 |
| 8 | 81547 | 2 | WASHER, LOCK, 7/16″ |
| 9 | 80700 | 2 | WASHER, 1/2″, Flat |
09-11 HUB AND SPINDLE ASSEMBLIES
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 28178300 | 1 | HUB ASSY., 783, 6-Bolt, Inc. 2 – 9, Gauge Wheels |
| 1 | 28187101 | 1 | 871, 10-Bolt, Inc 2 – 9, Transport Wheels |
| 2 | 28477700 | 1 | HUB CAP, Gauge Wheels |
| 2 | 28487101 | 1 | HUB ASSY., Cap, Transport Wheels |
| 3 | 651818R91 | 1 | BEARING, CONE, 1.25, Timken LM67048, Gauge Wheels |
| 3 | 21871750 | 1 | BEARING, CONE, 1.75, Timken 460, Transport Wheels |
| 4 | 651817R1 | 1 | BEARING, CUP, 2.33 OD, Timken LM67010, Gauge Wheels |
| 4 | 21884250 | 1 | CUP, 4.25 OD, Timken 453A, Transport Wheels |
| 5 | 549962R1 | 6 | BOLT, 1/2 x 1, NF, Hex, gd 5, Gauge Wheels |
| 5 | 16412418 | 10 | STUD, 3/4 x 2-9/16, NF, gd 8, Transport Wheels |
| 6 | 14091203 | 10 | NUT, SPECIAL, 3/4, NF, Flanged, Transport Wheels |
| 7 | 663558R1 | 1 | BEARING, CUP, 2.89 OD, Timken LM501310, Gauge Wheels |
| 7 | 21884430 | 1 | CUP, 4.4375 OD, Timken 39520, Transport Wheels |
| 8 | 663557R91 | 1 | BEARING, CONE, 1.625, Timken LM501349, Gauge Wheels |
| 8 | 21872505 | 1 | BEARING, CONE, 2.50, Timken 39585, Transport Wheels |
| 9 | 145769C91 | 1 | SEAL, 1.875 ID x 3.005 OD, CR18823, Gauge Wheels |
| 9 | 21933000 | 1 | SEAL, OIL, 3.00, CR30087, Transport Wheels |
| 10 | 432-1024 | 1 | PIN, SPLIT (COTTER), 5/32″ x 1 1/2″, Gauge Wheels |
| 10 | 432-1232 | 1 | PIN, SPLIT (COTTER), 3/16″ x 2″, Transport Wheels |
| 11 | 425-1314 | 1 | NUT, SLOTTED, 7/8″-14, G5, Gauge Wheels |
| 11 | 87355811 | 1 | Slotted, Transport Wheels |
| 12 | 87716935 | 1 | Gauge Wheels |
| 12 | 17952632 | 1 | WASHER, SPECIAL, 3.25 Dia, Special, Heavy, Transport Wheels |
| 13 | 28378305 | 1 | AXLE, 2.00, Straight, Gauge Wheels |
| 13 | 28387101 | 1 | SPINDLE, Q871, Drilled, Transport Wheels |
| 14 | 28278300 | 1 | HUB ASSY., 783, With Cups, Gauge Wheels |
| 14 | 28787101 | 1 | HUB ASSY., Q871, With Cups, Tranport Wheels |
| 15 | 28078305 | 1 | HUB ASSY., 783, Gauge Wheels |
| 15 | 28087102 | 1 | HUB ASSY., Q871, Transport Wheels |
| 16 | 413-612 | 4 | BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd |
09-12 REAR HITCH
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 09967720 | 1 | BRACKET, Rear Hitch Weldment |
| 2 | 09967730 | 2 | BRACKET, Arm Weldment |
| 3 | 09967727 | 2 | BAR ASSY., Guide, Rear Hitch |
| 4 | 09967725 | 2 | CAP, Plate With Holes |
| 5 | 25705012 | 1 | COUPLING, Breakaway Frame |
| 6 | 25705021 | 2 | COUPLING, Female |
| 7 | 218-5059 | 2 | CONNECTOR, HYD., 3/4″-16, 37є x 3/4″-16, O-Ring, Adapter |
| 8 | 25600752 | 2 | HOSE ASSY., 3/8 x 161, Hyrdaulic |
| 9 | 22510700 | 5 | CLAMP, HOSE, Cushioned, 5/8 |
| 10 | 433-616 | 5 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5 |
| 11 | 413-624 | 1 | BOLT, Hex, 3/8″-16 x 1 1/2″, G5 |
| 12 | 413-1296 | 1 | BOLT, Hex, 3/4″-10 x 6″, G5 |
| 13 | 413-16136 | 2 | BOLT, Hex, 1″-8 x 8 1/2″, G5 |
| 14 | 16901245 | 8 | BOLT, 3.4 x 10-1/2, NC |
| 15 | 86992213 | 6 | NUT, LOCK, 3/8, NC |
| 16 | 425-1012 | 9 | NUT, 3/4″-10, G5 |
| 17 | 86992219 | 2 | NUT, LOCK, 1, NC |
| 18 | 218-654 | 2 | CONNECTION, 4 WAY, 3/4″-16, 37є |
| 19 | 425-1010 | 12 | NUT, 5/8″-11, G5 |
| 20 | 09967728 | 1 | SPACER, Bushings, Rear Hitch |
| 21 | 17616011 | 8 | BUSHING, LARGE, Machinery |
| 22 | 87427161 | 4 | U-BOLT, 5/8 x 4 x 5-1/2 |
| 23 | 87436249 | 1 | HARNESS, Adapter |
| 24 | 413-412 | 2 | BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd |
| 25 | 86992211 | 2 | NUT, LOCK, 1/4, NC |
| 26 | 80702 | 1 | WASHER, 3/8″ |
| 27 | 87398411 | 1 | TRUSS ROD, Truss |
| 28 | 413-1096 | 4 | BOLT, Hex, 5/8″-11 x 6″, G5 |
09-13 HYDRAULIC LEVELER BAR
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 09102540 | 1 | BAR ASSY., Hydraulic Leveler, 9300 And 730B |
| 2 | 09102550 | 1 | BAR ASSY., Leveler, Rh, 9300 |
| 2 | 09102560 | 1 | BAR ASSY., Leveler, Lh, 9300 |
| 3 | 09102985 | 2 | ARM ASSY. |
| 4 | 09967620 | 2 | BRACKET, Support Arm |
| 5 | 25330101 | 2 | CYLINDER, 3 x 10, 3000 P.S.I. |
| 6 | 25330083 | 2 | CYLINDER ASSY., 3 x 8, With Stop, 3000 P.S.I. |
| 7 | 87550891 | 2 | STOP |
| 8 | 14891661 | 2 | PIN, SPECIAL, 1, Dia |
| 9 | 25890100 | 1 | KIT, Bag of Parts |
| 10 | 14891663 | 4 | PIN, HITCH, 1, Dia |
| 11 | 432-1624 | 16 | PIN, SPLIT (COTTER), 1/4″ x 1 1/2″ |
| 12 | 09102570 | 1 | PRODUCT GRAPHIC, SMV |
| 13 | 311860A1 | 1 | EMBLEM, SMV |
| 14 | 413-640 | 8 | BOLT, Hex, 3/8″-16 x 2 1/2″, G5 |
| 15 | 413-1296 | 8 | BOLT, Hex, 3/4″-10 x 6″, G5 |
| 16 | 413-412 | 2 | BOLT, Hex, 1/4″-20 x 3/4″, G5, Full Thd |
| 17 | 16309091 | 1 | U-BOLT, 3/8 x 4 x 4.9 |
| 18 | 87427192 | 4 | BOLT, SPECIAL, 3/4 x 5.69 |
| 19 | 425-106 | 8 | NUT, 3/8″-16, G5 |
| 20 | 425-1412 | 8 | NUT, Jam, 3/4″-10, G5, Hex |
| 21 | 425-1012 | 16 | NUT, 3/4″-10, G5, Hex |
| 22 | 86992211 | 2 | NUT, LOCK, 1/4, NC, Hex |
| 23 | 87039402 | 2 | NUT, LOCK, 3/8″-16, GB |
| 24 | 17412001 | 4 | WASHER, 3/4 ID, H.T. |
| 26 | 87367 | 20 | WASHER, 1″, SAE |
| 27 | 09102904 | 4 | SPACER, 1 x 3/4 |
| 28 | 17616020 | 8 | WASHER, 1, Machinery, 14 ga |
| 30 | 18534227 | 2 | DECAL, Danger |
| 31 | 18534261 | 1 | DECAL, DMI |
| 32 | 00148150 | 2 | PIN, SPECIAL, 1 x 7.94 |
| 33 | 09102982 | 8 | SPACER |
| 34 | 311863A1 | 2 | REFLECTOR, Red |
| 35 | 311864A1 | 2 | REFLECTOR, Yellow |
| 36 | 413-1024 | 2 | BOLT, Hex, 5/8″-11 x 1 1/2″, G5, Full Thd |
| 40 | 429723A1 | 2 | SCREW, 5.19 Thread |
09-14 DISC LEVELER
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 09103200 | 1 | LEVELLING DEVICE, Disc Leveler |
| 2 | 09103300 | 1 | LEVELLING DEVICE, Arm |
| 3 | 09103250 | 1 | LEVELLING DEVICE, T |
| 4 | 09103020 | 1 | RETAINER, Long, Retainer |
| 5 | 24146820 | 1 | SPRING, Compression |
| 6 | 87328481 | 2 | HUB ASSY., Disc Spindle |
| 7 | 443628A1 | 2 | DISC, PLOW, 18, Blade |
| 8 | 87427190 | 1 | BOLT, SPECIAL, 5-5/16, Square |
| 9 | 16901022 | 2 | SCREW, 5/8 x 6, NC, Hex, A325 |
| 10 | 09103030 | 1 | PLUG, Heat Treated |
| 11 | 80299 | 4 | WASHER, 5/8″, Flat |
| 12 | 86992216 | 2 | NUT, LOCK, 5/8, NC, Hex |
| 13 | 425-1410 | 2 | NUT, Jam, 5/8″-11, G5 |
| 14 | 231-53410 | 6 | NUT, LOCK, Flg, 5/8″-11 |
| 15 | 425-1010 | 1 | NUT, 5/8″-11, G5 |
| 16 | 433-816 | 8 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5 |
| 17 | 425-108 | 8 | NUT, 1/2″-13, G5 |
| 18 | 413-1032 | 4 | BOLT, Hex, 5/8″-11 x 2″, G5 |
| 19 | 219-86 | 1 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive |
| 20 | 17411011 | 1 | WASHER, 5/8, Flat |
| 21 | 09102020 | 1 | DISC, PLOW, With 1 Blade Complete, Inc. 6 – 7 And 22 |
| 21 | 09102099 | 1 | DISC, PLOW, With 2 Blades Complete, Inc. 6 – 7 And 22 |
| 22 | 09103000 | 1 | BRACKET, Mount Assembly, Without Blades, Spindle Assembly Or Hardware |
09-15 DISC LEVELER HUB AND SPINDLE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87328481 | 1 | HUB ASSY., Mount Assembly Complete |
| 2 | 09193150 | 1 | HUB ASSY., With Bearings and Cups |
| 3 | 09103120 | 1 | DISC, Spindle |
| 4 | 463911R91 | 2 | BEARING, CONE, 1.00, L44643 |
| 5 | 572564R1 | 2 | BEARING, CUP, 1.980 OD, L44610 |
| 6 | 21931375 | 1 | SEAL, 1.375, CR533468 |
| 7 | 17412001 | 1 | WASHER, 3/4, Flat, H.T. |
| 8 | 425-1312 | 1 | NUT, SLOTTED, 3/4″-16, G5 |
| 9 | 28420021 | 1 | CAP, Grease |
| 10 | 432-816 | 1 | PIN, SPLIT (COTTER), 1/8″ x 1″ |
| 11 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
09-16 DISC LEVELER HUB AND SPINDLE 2006 PRODUCTION
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87377044 | 1 | STUB AXLE/STRG.SPINDLE, Complete |
| 2 | 87328282 | 1 | SEAL, Counterface |
| 3 | 87328281 | 1 | SEAL, V |
| 4 | 87328280 | 1 | RETAINER, SEAL |
| 5 | 463911R91 | 2 | BEARING, CONE, 1.00 Bore, L44643 |
| 6 | 572564R1 | 2 | BEARING, CUP, 1.980 |
| 7 | 14610208 | 2 | RETAINER, Snap Ring, 2.078 OD x .125 |
| 8 | 20092001 | 1 | AXLE, Disc Spindle Machine |
| 9 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 10 | 17412001 | 1 | WASHER, .75 ID, HT, Black |
| 11 | 432-816 | 1 | PIN, SPLIT (COTTER), 1/8″ x 1″ |
| 12 | 425-1312 | 1 | NUT, SLOTTED, 3/4″-16, G5 |
| 13 | 28420021 | 1 | CAP, Grease |
09-17 JACK ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 32230000 | 1 | JACK, 3000# |
| 3 | 32230100 | 1 | PACKAGE, Handle Replacment, Inc. 2, 4 , And 9 |
| 5 | 09311040 | 1 | BUSHING, Mounting |
09-18 SAFETY SIGNS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 18534140 | 1 | DECAL, Unhitching |
| 2 | 18534227 | 1 | DECAL, Crushing |
| 3 | 18534262 | 1 | DECAL, Leveling |
09-19 SAFETY SIGNS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 18534277 | 1 | DECAL, Stored Energy |
| 2 | 18534227 | 1 | DECAL, Helping Plants Thrive |
| 3 | 18534333 | 1 | DECAL, Pinch |
09-20 DECALS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87457429 | 1 | DECAL, 9300, Case IH, Rh, Used On 2006 And Prior Models |
| 2 | 87457430 | 1 | DECAL, 9300, Case IH, Lh, Used On 2006 And Prior Models |
| 3 | 87594309 | 1 | DECAL, 9300, Case IH, Rh, Used On 2007 And After Models |
| 4 | 87594310 | 1 | DECAL, 9300, Case IH, Lh, Used On 2007 And After Models |