CASE IH MX 240 Magnum Tractor (Emerging Market)
CASE IH MX 240 Magnum Tractor (Emerging Market) — parts list, part 2 of 4
Assemblies on this page: 05-08 CARRIER AND DIFFERENTIAL – MFD, 10 BOLT HUB, WITHOUT DIFFERENTIAL LOCK … 07-07 PARK BRAKE – RELEASE.
05-08 CARRIER AND DIFFERENTIAL – MFD, 10 BOLT HUB, WITHOUT DIFFERENTIAL LOCK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87324562 | 1 | CARRIER, Inc. 2 – 51 |
| 2 | 87404057 | 1 | CARRIER, Inc. 3 – 6 |
| 5 | 896-12016 | 4 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 828-16090 | 4 | BOLT, Hex, M16 x 90, 10.9 |
| 7 | 345688A4 | 1 | DIFFERENTIAL, Inc. 8 – 19 |
| 10 | 1997853C1 | 8 | BOLT |
| 11 | 377176A3 | 1 | KIT, Inc. 12 – 19 |
| 16 | 377177A3 | 1 | KIT, Inc. 17 – 19 |
| 20 | 1968293C1 | 1 | GEAR, BEVEL, Inc. 21, 22 |
| 23 | H136416 | 12 | SCREW |
| 25 | 315421A1 | 1 | BEARING, CONE |
| 26 | 315422A1 | 1 | BEARING, CUP |
| 27 | 1277229C1 | 1 | PACKAGE, Inc. 28 |
| 29 | 251189A1 | 1 | SPACER |
| 30 | 318504A1 | 1 | KIT, SHIM, Inc. 31 |
| 32 | 315424A1 | 1 | BEARING, CUP |
| 33 | 315423A1 | 1 | BEARING, CONE |
| 34 | 318845A1 | 1 | SLINGER |
| 35 | 87324555 | 1 | SEAL ASSY. |
| 36 | 87324552 | 1 | YOKE, Inc. 37, 51 |
| 37 | 87324558 | 1 | DEFLECTOR |
| 38 | H224501 | 1 | WASHER, 7/8 inch |
| 39 | 232-46314 | 1 | NUT, LOCK, 7/8″-14, GC |
| 45 | 1968291C1 | 2 | BEARING |
| 46 | 1968292C1 | 2 | BEARING |
| 47 | 1277233C1 | 2 | RING |
| 48 | 1277234C1 | 2 | CLEVIS |
| 49 | 496-11034 | 2 | WASHER, 11/32″ x 11/16″ x 1/16″, HDN |
| 50 | 628-8016 | 2 | BOLT, Hex, M8 x 16, 10.9, Full Thd |
05-09 CARRIER AND DIFFERENTIAL – MFD, 12 BOLT HUB, WITHOUT DIFFERENTIAL LOCK
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87324564 | 1 | CARRIER, Inc. 2 – 50 |
| 2 | 87324561 | 1 | CARRIER, Inc. 3 – 6 |
| 5 | 896-12016 | 4 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 828-16090 | 4 | BOLT, Hex, M16 x 90, 10.9 |
| 7 | 345688A4 | 1 | DIFFERENTIAL, Inc. 8 – 19 |
| 10 | 1997853C1 | 8 | BOLT |
| 11 | 377176A3 | 1 | KIT, Inc. 12 – 19 |
| 16 | 377177A3 | 1 | KIT, Inc. 17 – 19 |
| 20 | 87324538 | 1 | BEVEL GEAR, Inc. 21,22 |
| 23 | H136416 | 12 | SCREW |
| 25 | 87324516 | 1 | BEARING, CONE |
| 26 | 87324517 | 1 | BEARING, CUP |
| 27 | 87324518 | 1 | KIT, SHIM, Inc. 28 |
| 30 | 87324536 | 1 | KIT, SHIM, Inc. 31 |
| 32 | 87324534 | 1 | BEARING, CONE |
| 33 | 87324532 | 1 | BEARING, CUP |
| 34 | 87324540 | 1 | SLINGER |
| 35 | 87324542 | 1 | SEAL, OIL |
| 36 | 87324528 | 1 | YOKE, Inc. 37, 51 |
| 37 | 87324547 | 1 | DEFLECTOR |
| 38 | 87324523 | 1 | WASHER |
| 39 | 87324520 | 1 | NUT |
| 45 | 1968291C1 | 2 | BEARING |
| 46 | 1968292C1 | 2 | BEARING |
| 47 | 1277233C1 | 2 | RING |
| 48 | 1277234C1 | 2 | CLEVIS |
| 49 | 496-11034 | 2 | WASHER, 11/32″ x 11/16″ x 1/16″, HDN |
| 50 | 628-8016 | 2 | BOLT, Hex, M8 x 16, 10.9, Full Thd |
05-10 FRONT AXLE PLANETARIES AND HUB – MFD, 10 BOLT HUB
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 295165A1 | 2 | HUB, , Axle BSN Z7RZ02024 |
| 2 | 87588833 | 2 | HUB, , Axle ASN Z7RZ02024 |
| 3 | 1277344C1 | 2 | BEARING, CUP |
| 4 | L33732 | 2 | CUP ASSY. |
| 5 | 231023A1 | 20 | STUD |
| 8 | 1277343C1 | 2 | BEARING, CONE |
| 9 | L33737 | 2 | BEARING, CONE |
| 10 | 281984A1 | 2 | GEAR, RING, Inc. 12 – 14 |
| 15 | 1981236C1 | 2 | KIT, SHIM, Inc. 15 |
| 16 | 251190A1 | 2 | PLATE, LARGE |
| 17 | 628-12030 | 12 | BOLT, Hex, M12 x 30, 10.9, Full Thd |
| 18 | 310947A1 | 2 | WASHER, THRUST |
| 19 | 302198A2 | 2 | SUN GEAR, Inc. 20, 38 |
| 21 | 316330A2 | 1 | KIT, FIP, Inc. 29 – 32 |
| 24 | 302251A2 | 2 | GEAR WHEEL, Inc. 25 – 32 |
| 26 | 302197A1 | 4 | PIN, LARGE |
| 27 | 100-21131 | 4 | RING, SNAP, 1.312″, Int, #131 |
| 28 | 302184A1 | 1 | BUTTON, HOLE PLUG |
| 33 | 864-6020 | 4 | SCREW, Hex Soc Hd, M6 x 20, 8.8 |
| 34 | 221-887 | 2 | PLUG, 3/4 |
| 35 | 253212A1 | 20 | NUT |
| 36 | 87403378 | 2 | WASHER, THRUST |
| 37 | 87403379 | 2 | SNAP RING |
| 39 | 87311480 | 1 | KIT, Hub Seal, Axle BSN Z7RZ02024 |
| 39 | 87588941 | 1 | KIT, Hub Seal, Axle ASN Z7RZ02024 |
| 40 | 87588837 | 1 | KIT, V-Ring Seal |
05-11 FRONT AXLE PLANETARIES AND HUB – MFD, 12 BOLT HUB
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 295168A1 | 2 | HUB, , Axle BSN Z7RZ02024 |
| 2 | 87390163 | 2 | HUB, , Axle ASN Z7RZ02024 |
| 3 | L31698 | 2 | BEARING, CUP, 7-3/16 OD x 1-15/16 inch wide (183 x 49 MM) |
| 4 | 135649A1 | 2 | BEARING, CUP |
| 5 | 297495A1 | 24 | STUD |
| 8 | 311042A1 | 2 | BEARING, CONE |
| 9 | 135648A1 | 2 | BEARING, CONE |
| 10 | 281985A1 | 2 | GEAR, RING, Inc. 12 – 14 |
| 15 | 302180A1 | 2 | KIT, SHIM, Inc. 15 |
| 16 | 281986A1 | 2 | PLATE, LARGE |
| 17 | 628-12030 | 16 | BOLT, Hex, M12 x 30, 10.9, Full Thd |
| 19 | 281982A3 | 2 | SUN GEAR |
| 20 | 302174A1 | 2 | GEAR WHEEL, Inc. 25 – 32 |
| 21 | 316328A1 | 1 | KIT, FIP, Inc. 29 – 32 |
| 26 | 302196A1 | 4 | PIN, LARGE |
| 27 | 100-21150 | 4 | RING, SNAP, 1.50″, Int, #150 |
| 28 | 302184A1 | 1 | BUTTON, HOLE PLUG |
| 33 | 864-6020 | 6 | SCREW, Hex Soc Hd, M6 x 20, 8.8 |
| 34 | 221-887 | 2 | PLUG, 3/4 |
| 35 | 253212A1 | 24 | NUT |
| 36 | 87403378 | 1 | WASHER, THRUST |
| 37 | 87403379 | 1 | SNAP RING |
| 38 | 87390190 | 1 | KIT, Hub Seal |
| 39 | 87390352 | 1 | KIT, V-Ring Seal |
05-12 STEERING CYLINDER ASSEMBLY – MFD, 10 BOLT HUB
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87455636 | 1 | CYLINDER ASSY., Left Hand, Inc. 2 – 25 |
| 1 | 87455637 | 1 | CYLINDER ASSY., Right Hand, Inc. 2 – 25 |
| 2 | 87455638 | 1 | CYLINDER ASSY., Kit, Left Hand, Inc. 3 – 15 |
| 2 | 87455639 | 1 | CYLINDER ASSY., Kit, Right Hand, Inc. 3 – 15 |
| 3 | 87455642 | 1 | ROD, PISTON |
| 5 | 314450A2 | 1 | BUSHING, LARGE |
| 6 | 238-5212 | 2 | O-RING, -212, 70 Duro, .859″ ID x .139″ Thk |
| 7 | 220064A1 | 1 | PLUG, M14 x 1.5, ORB, Incl. 8 |
| 8 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 9 | 87455643 | 1 | CAP CYLINDER END |
| 10 | 87455641 | 1 | KIT, SEALS, Inc. 11 – 15 |
| 16 | 87455628 | 1 | BALL JOINT, Inc. 17- 25 |
| 17 | 87455652 | 1 | SEALRING, Small |
| 18 | 87455667 | 1 | SEALRING, Large |
| 19 | 87455665 | 1 | BOLT |
| 20 | 87455773 | 1 | CLAMP |
| 22 | 87455664 | 1 | BOOT |
| 23 | 87455662 | 1 | NUT, SPECIAL |
| 24 | 87455654 | 1 | FITTING |
| 25 | 87455666 | 1 | NUT, SPECIAL |
05-13 STEERING CYLINDER ASSEMBLY – MFD, 12 BOLT HUB
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87455647 | 1 | CYLINDER ASSY., Left Hand, Inc. 2 – 25 |
| 1 | 87455648 | 1 | CYLINDER ASSY., Right Hand, Inc. 2 – 25 |
| 2 | 87455649 | 1 | CYLINDER STEERING, Kit, Left Hand, Inc. 3 – 15 |
| 2 | 87455650 | 1 | CYLINDER STEERING, Kit, Right Hand, Inc. 3 – 15 |
| 3 | 87455653 | 1 | ROD, PISTON |
| 5 | 314450A2 | 1 | BUSHING, LARGE |
| 6 | 238-5212 | 2 | O-RING, -212, 70 Duro, .859″ ID x .139″ Thk |
| 7 | 220064A1 | 1 | PLUG, M14 x 1.5, ORB, Incl. 8 |
| 8 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 9 | 87455634 | 1 | CAP CYLINDER END |
| 10 | 87455632 | 1 | KIT, SEALS, Inc. 11 – 15 |
| 16 | 87455628 | 1 | BALL JOINT, Inc. 17 – 25 |
| 17 | 87455652 | 1 | SEALRING, Small |
| 18 | 87455667 | 1 | SEALRING, Large |
| 19 | 87455665 | 1 | BOLT |
| 20 | 87455773 | 1 | CLAMP |
| 22 | 87455664 | 1 | BOOT |
| 23 | 87455662 | 1 | NUT, SPECIAL |
| 24 | 87455654 | 1 | FITTING |
| 25 | 87455666 | 1 | NUT, SPECIAL |
05-14 FRONT WHEELS – MFD, 10 BOLT HUB
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 259367A2 | 2 | WHEEL, W18Lx28, Inc. 2 – 6, For Tires 600/65R28 |
| 2 | 188350A2 | 1 | RIM |
| 3 | 240677A1 | 1 | FLANGE, 10 bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 259368A1 | 2 | WHEEL ASSY, W13x30, Inc. 2 – 6, For Tires 380/85R30, 14.9R30 |
| 2 | 188338A1 | 1 | RIM |
| 3 | 240677A1 | 1 | FLANGE, 10 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 259369A1 | 2 | WHEEL ASSY., DW15Lx30, Inc. 2 – 6, For Tires 480/85R30, 480/70R30, 420/90R30, 16.9R30 |
| 2 | 188341A1 | 1 | RIM |
| 3 | 240677A1 | 1 | FLANGE, 10 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 87401232 | 2 | WHEEL, DW20Ax30, Inc. 2 – 6, For Tires 600/70R30 |
| 2 | 87402304 | 1 | RIM |
| 3 | 240677A1 | 1 | FLANGE, 10 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 259372A1 | 2 | WHEEL ASSY., W13x34, Inc. 2 – 6, For Tires 380/85R34, 14.9R34 |
| 2 | 231998A1 | 1 | RIM |
| 3 | 259373A1 | 1 | FLANGE, 10 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 259370A1 | 2 | WHEEL ASSY., W15Lx34, Inc. 2 – 6, For Tires 480/70R34, 540/65R34 |
| 2 | 259416A1 | 1 | RIM |
| 3 | 259373A1 | 1 | FLANGE, 10 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 297354A1 | 2 | WHEEL, W10x38, Inc. 2 – 6, For Tires 320/85R38 |
| 2 | 297355A1 | 1 | RIM, W10x38 |
| 3 | 297356A1 | 1 | DISC |
| 4 | 240686A1 | 12 | BOLT, SPECIAL |
| 5 | 896-11016 | 12 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 12 | NUT, M16, Cl 10 |
| 1 | 347616A1 | 2 | WHEEL, W12x38, Inc. 2 – 6, For Tires 380/80R38 |
| 2 | 347618A1 | 1 | RIM |
| 3 | 297356A1 | 1 | DISC, 10 Bolt |
| 4 | 240686A1 | 12 | BOLT, SPECIAL |
| 5 | 896-11016 | 12 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 12 | NUT, M16, Cl 10 |
| 1 | 396518A1 | 2 | WHEEL, W10Ax42, Inc. 2 – 6, For Tires 320/80R42 |
| 2 | 396520A1 | 1 | RIM |
| 3 | 297356A1 | 1 | DISC, 10 Bolt |
| 4 | 240686A1 | 12 | BOLT, SPECIAL |
| 5 | 896-11016 | 12 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 12 | NUT, M16, Cl 10 |
| 10 | 86507333 | 2 | VALVE STEM |
05-27 FRONT WHEELS – MFD, 12 BOLT HUB
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 188347A2 | 2 | WHEEL ASSY, W18Lx28, Inc. 2 – 6, For Tires 600/65R28 |
| 2 | 188350A2 | 1 | RIM |
| 3 | 188328A1 | 1 | DISC, WHEEL, 12 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 188335A1 | 2 | WHEEL ASSY., DWW13x30, Inc. 2 – 6, For Tires 380/85R30, 14.9R30 |
| 2 | 188338A1 | 1 | RIM |
| 3 | 188328A1 | 1 | DISC, WHEEL, 12 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 188339A1 | 2 | WHEEL ASSY., DWW15x30 Inc. 2 – 6, For Tires 480/85R30, 480/70R30, 420/90R30, 16.9R30 |
| 2 | 188341A1 | 1 | RIM |
| 3 | 188328A1 | 1 | DISC, WHEEL, 12 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 87401233 | 2 | WHEEL, DW20x30, Inc. 2 – 6, For Tires 660/70R30 |
| 2 | 87402304 | 1 | RIM |
| 3 | 188328A1 | 1 | DISC, WHEEL, 12 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 231997A1 | 2 | WHEEL ASSY., W13x34, Inc. 2 – 6, For Tires 380/85R34 |
| 2 | 231998A1 | 1 | RIM |
| 3 | 231999A1 | 1 | FLANGE, 12 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 259371A1 | 2 | WHEEL ASSY., W15lx34, Inc. 2 – 6, For Tires 480/70R34, 540/65R34 |
| 2 | 259416A1 | 1 | RIM |
| 3 | 231999A1 | 1 | FLANGE, 12 Bolt |
| 4 | 240686A1 | 8 | BOLT, SPECIAL |
| 5 | 896-11016 | 8 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 8 | NUT, M16, Cl 10 |
| 1 | 87544869 | 2 | WHEEL ASSY, W10x38, Inc. 2 – 6, For Tires 320/85R38 |
| 2 | 297355A1 | 1 | RIM |
| 3 | 87544709 | 1 | DISC, 12 Bolt |
| 4 | 240686A1 | 12 | BOLT, SPECIAL |
| 5 | 896-11016 | 12 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 12 | NUT, M16, Cl 10 |
| 1 | 87544870 | 2 | WHEEL ASSY, W12x38, Inc. 2 – 6, For Tires 380/80R38 |
| 2 | 347618A1 | 1 | RIM |
| 3 | 87544709 | 1 | DISC, 12 Bolt |
| 4 | 240686A1 | 12 | BOLT, SPECIAL |
| 5 | 896-11016 | 12 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 12 | NUT, M16, Cl 10 |
| 1 | 87544871 | 2 | WHEEL ASSY, W10Ax42, Inc. 2 – 6, For Tires 320/80R42 |
| 2 | 396520A1 | 1 | RIM |
| 3 | 87544709 | 1 | DISC, 12 Bolt |
| 4 | 240686A1 | 12 | BOLT, SPECIAL |
| 5 | 896-11016 | 12 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 829-1416 | 12 | NUT, M16, Cl 10 |
| 10 | 86507333 | 2 | VALVE STEM |
06-01 TRANSMISSION DRIVE SHAFT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 248408A2 | 1 | PLATE, DRIVE, , MX210 |
| 2 | 628-12030 | 6 | BOLT, Hex, M12 x 30, 10.9, Full Thd |
| 3 | 896-12012 | 6 | WASHER, M12 x 24.5 x 3, HT |
| 4 | 259075A3 | 1 | SHAFT, DRIVE, Inc. 5, 6, MX210 |
| 4 | 301842A2 | 1 | SHAFT, DRIVE, Inc. 5, 6, MX240 And MX255 |
| 5 | 259076A2 | 2 | SPIDER, U-JOINT, , MX210 |
| 5 | 301844A2 | 2 | SPIDER, U-JOINT, , MX240 And MX255 |
| 6 | 828-10045 | 8 | BOLT, Hex, M10 x 45, 10.9, , MX210 |
| 6 | 828-12050 | 8 | BOLT, Hex, M12 x 50, 10.9, , MX240 And MX255 |
| 7 | 828-10045 | 4 | BOLT, Hex, M10 x 45, 10.9, , MX210 |
| 7 | 828-12050 | 4 | BOLT, Hex, M12 x 50, 10.9, , MX240 And MX255 |
| 8 | 828-10045 | 4 | BOLT, Hex, M10 x 45, 10.9, , MX210 |
| 8 | 828-12050 | 4 | BOLT, Hex, M12 x 50, 10.9, , MX240 And MX255 |
| 9 | 259188A1 | 1 | YOKE, Input, MX210 |
| 9 | 301843A1 | 1 | YOKE, Input, MX240 And MX255 |
06-02 TRANSMISSION DROP BOX
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 225171A6 | 1 | HOUSING, Inc. 2, 3 |
| 2 | 375362R1 | 2 | PIN, 1/2 x 1-3/8 |
| 3 | 837-20040 | 2 | DOWEL, M20 x 40, 20 x 40 mm |
| 4 | 302553A1 | 1 | SHAFT, GEAR, 33T |
| 5 | 105503H | 1 | BEARING, CONE |
| 6 | 105496H | 1 | BEARING, CUP |
| 7 | 659458R1 | 1 | BEARING, CONE |
| 8 | 105497H | 1 | BEARING, CUP |
| 9 | 341206A1 | 2 | SHIM, 0,152 mm |
| 9 | 341205A1 | 2 | SHIM, 0,178 mm |
| 9 | 275214A1 | 2 | SHIM, 0,203 mm |
| 9 | 228267A1 | 2 | SHIM, 0,356 mm |
| 9 | 228270A1 | 2 | SHIM, 0,635 mm |
| 10 | 221240A4 | 1 | CAGE |
| 11 | 238-5161 | 1 | O-RING, -161, 70 Duro, 5.487″ ID x .103″ Thk, 5-7/16 ID x 3/32 |
| 12 | 339770A1 | 3 | SCREW |
| 13 | 225820A1 | 1 | SEAL, OIL |
| 14 | 259188A1 | 1 | YOKE, , MX210 |
| 14 | 301843A1 | 1 | YOKE, , MX240 And MX255 |
| 15 | 238-5225 | 1 | O-RING, -225, 70 Duro, 1.859″ ID x .139″ Thk |
| 16 | 276638A1 | 2 | SHIM, 0,203 mm |
| 16 | 230486A1 | 2 | SHIM, 0,356 mm |
| 16 | 230487A1 | 2 | SHIM, 0,508 mm |
| 16 | 230488A1 | 2 | SHIM, 0,559 mm |
| 16 | 230490A1 | 2 | SHIM, 0,635 mm |
| 17 | 230497A1 | 1 | WASHER |
| 18 | 628-16035 | 1 | BOLT, Hex, M16 x 35, 10.9, Full Thd, Hex, M16 x 35, 10.9, Full Thd |
| 25 | 302554A1 | 1 | SHAFT, GEAR, 35T |
| 26 | 101-21325 | 2 | RING, SNAP, #325, 3.488″, Int, No. 325 |
| 27 | 364463C91 | 2 | BEARING, CONE |
| 28 | 364462C1 | 2 | BEARING, CUP |
| 29 | 228304A2 | 1 | SHAFT ASSY., Inc. 30,31 |
| 30 | 837-8020 | 1 | DOWEL, M8 x 20, 8 x 20 mm |
| 31 | 1342851C1 | 1 | PLUG, 10 mm |
| 32 | 238-5140 | 1 | O-RING, -140, 90 Duro, 2.237″ ID x .103″ Thk |
| 33 | 341208A1 | 2 | SHIM, 0,152 mm |
| 33 | 341207A1 | 2 | SHIM, 0,178 mm |
| 33 | 275215A1 | 2 | SHIM, 0,203 mm |
| 33 | 228300A1 | 2 | SHIM, 0,356 mm |
| 33 | 228303A1 | 2 | SHIM, 0,635 mm |
| 34 | 258469A1 | 1 | PLATE, COVER |
| 35 | 339770A1 | 2 | SCREW |
| 40 | 302555A1 | 1 | SHAFT, GEAR, 30 T |
| 41 | 282726A1 | 1 | SHAFT, Inc. 42,43, Without Creep Speed |
| 41 | 282724A1 | 1 | SHAFT, Inc. 42,43, With Creep Speed |
| 42 | 38-3605 | 1 | PIN, 3/32″ x 5/16″, Coiled |
| 43 | 284151A1 | 1 | SCREW, M10 x 10 |
| 44 | 105503H | 2 | BEARING, CONE |
| 45 | 105496H | 2 | BEARING, CUP |
| 46 | 341210A1 | 2 | SHIM, 0,152 mm |
| 46 | 341209A1 | 2 | SHIM, 0,178 mm |
| 46 | 275213A1 | 2 | SHIM, 0,203 mm |
| 46 | 228261A1 | 2 | SHIM, 0,356 mm |
| 46 | 228265A1 | 2 | SHIM, 0,635 mm |
| 47 | 226188A3 | 1 | CAGE |
| 48 | 238-5157 | 1 | O-RING, -157, 70 Duro, 4.487″ ID x .103″ Thk |
| 49 | 339770A1 | 3 | SCREW |
| 50 | 230760A2 | 1 | GASKET |
| 51 | 828-20110 | 2 | BOLT, Hex, M20 x 110, 10.9, M20 x 110; 10.9 |
| 52 | 259979A2 | 1 | TUBE |
| 53 | 614-10020 | 1 | BOLT, Hex, M10 x 20, 8.8, Full Thd |
| 54 | 892-11010 | 1 | WASHER, LOCK, M10 |
| 55 | 93105C1 | 1 | UNION |
| 56 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 57 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 64 | 896-12020 | 2 | WASHER, M20 x 37.5 x 4, HT, 22 x 37 x 4 mm |
| 70 | 279640A1 | 1 | CAP |
| 71 | 295087A1 | 1 | TUBE |
| 72 | 238-5222 | 1 | O-RING, -222, 70 Duro, 1.484″ ID x .139″ Thk |
| 73 | 614-10020 | 2 | BOLT, Hex, M10 x 20, 8.8, Full Thd |
| 74 | 248-2181 | 1 | GROMMET, 1″ ID x 3/8″ Groove Dia, 1 ID |
06-03 SPEED TRANSMISSION – HOUSING
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 307087A2 | 1 | HOUSING, Inc. 2, 3, BSN AJB0304805 |
| 1 | 307087A3 | 1 | HOUSING, Inc. 2, 3, ASN AJB0304805 |
| 1 | 87435948 | 1 | HOUSING, Inc. 2, 3, Replaces 307087A3. Also Order 2 of 828-16090 and 1 of 700-438 |
| 2 | 837-12030 | 2 | DOWEL, M12 x 30 |
| 3 | 192792A1 | 2 | PLUG, 3/4 in |
| 4 | 828-16060 | 8 | BOLT, Hex, M16 x 60, 10.9, Full Thd |
| 4 | 828-16080 | 1 | BOLT, Hex, M16 x 80, 10.9 |
| 5 | 896-12016 | 9 | WASHER, M17.5 x 30 x 4, HT |
| 6 | 87308873 | 1 | SCREW, 12 Pt Hd, M16 x 90, 12.9, M20 x 90; 10.9 |
| 7 | 896-12016 | 1 | WASHER, M17.5 x 30 x 4, HT, 22 x 37 x 4 mm |
| 8 | 201-401 | 1 | TEE, 11/16″-16 x 9/16″-18 Br, ORFS, 11/16 fc sl x 9/16 Or, Inc. 9, 10 |
| 8 | 700-438 | 1 | TEE, 11/16″-16 ORFS x M18 x 1.5 ORB Br, Used With 87435948 Housing, Inc. 9, 10A |
| 9 | 238-6012 | 2 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 10 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 11 | 205369R91 | 1 | BEARING, NEEDLE |
| 12 | 828-16090 | 2 | BOLT, Hex, M16 x 90, 10.9 |
| 13 | 896-12016 | 2 | WASHER, M17.5 x 30 x 4, HT |
| 15 | 235976A2 | 2 | TUBE |
| 16 | 235977A2 | 2 | TUBE |
| 17 | 238-5014 | 8 | O-RING, -014, 70 Duro, .489″ ID x .070″ Thk |
| 18 | 234157A5 | 1 | GASKET |
| 19 | 445535A2 | 1 | PLATE ASSY., , See Figure 06-04 |
| 26 | 861-10030 | 1 | SCREW, Hex Soc Hd, M10 x 30, 12.9 |
| 27 | 628-10035 | 6 | BOLT, Hex, M10 x 35, 10.9, Full Thd |
| 27 | 614-10040 | 2 | BOLT, Hex, M10 x 40, 8.8, Full Thd, M10 x 40; 8.8 |
| 30 | 235977A2 | 2 | TUBE |
| 31 | 238-5014 | 4 | O-RING, -014, 70 Duro, .489″ ID x .070″ Thk |
| 32 | 300827A1 | 1 | TUBE |
| 33 | 238-5019 | 2 | O-RING, -019, 70 Duro, .801″ ID x .070″ Thk |
| 34 | 253805A1 | 1 | GASKET |
| 35 | 445533A2 | 1 | PLATE ASSY., , See Figure 06-05 |
| 37 | 861-10035 | 4 | SCREW, Hex Soc Hd, M10 x 35, 12.9, M10 x 35; 12.9 |
| 40 | 93103C1 | 1 | UNION, , With Creep Speed |
| 41 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 42 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 43 | 256955A2 | 1 | TUBE, , With Creep Speed |
| 44 | 218-5351 | 1 | CONNECTOR, HYD., 3/4″-16, 37є x 9/16″-18, O-Ring, 3/4 fl x 9/16 Or, Inc. 45, With Creep Speed |
| 45 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 50 | 93105C1 | 1 | UNION, , With Creep Speed |
| 51 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 52 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 53 | 311670A1 | 1 | TUBE, , With Creep Speed |
| 54 | 218-5103 | 1 | ELBOW, 90є, 7/16″-20, 37є x 7/16″-20, O-Ring, 7/16 fl x adj Or, Inc. 55, With Creep Speed |
| 55 | 237-6004 | 1 | O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk |
| 60 | 214389 | 2 | PLUG, Hex Hd, 3/4″-16 ORB, Includes Ref. 61, Without Creep Speed |
| 61 | 237-6008 | 2 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 65 | 86579691 | 1 | ELBOW, 90є, 13/16″-18 ORFS x M18 x 1.5 ORB, Inc. 66, 67 |
| 66 | 9992298 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 67 | 86598101 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 68 | 295149A1 | 1 | TUBE |
| 69 | 295316A1 | 1 | DIPSTICK |
| 70 | 828-16070 | 2 | BOLT, Hex, M16 x 70, 10.9 |
| 71 | 896-12016 | 2 | WASHER, M17.5 x 30 x 4, HT |
| 72 | 614-12025 | 4 | BOLT, Hex, M12 x 25, 8.8, (Not Shown) |
06-04 PLATE ASSEMBLY – VALVE MOUNTING, LEFT HAND SIDE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 1994615C2 | 2 | VALVE, CHECK |
| 4 | 234802A2 | 1 | PIN |
| 5 | 315904A1 | 1 | PLATE, RETAINING |
| 6 | 863-6020 | 2 | SCREW, Hex Soc Hd, M6 x 20, 12.9 |
| 7 | 238-5208 | 1 | O-RING, -208, 70 Duro, .609″ ID x .139″ Thk |
| 8 | 445492A2 | 1 | VALVE, CHECK, Inc. 9 – 14 |
| 10 | 238-5012 | 1 | O-RING, -012, 70 Duro, .364″ ID x .070″ Thk |
| 11 | 211-1009 | 1 | BALL, 9/32; 24,CRS |
| 12 | 445494A1 | 1 | SPRING, VALVE |
| 13 | 100-2131 | 1 | RING, SNAP, 0.312″, Int, #31 |
| 14 | 86988656 | 1 | WASHER, SPRING |
06-05 PLATE ASSEMBLY – VALVE MOUNTING, TOP
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 445532A2 | 1 | PLATE |
| 2 | 445492A2 | 2 | VALVE, CHECK, Inc. 3 – 8 |
| 4 | 238-5012 | 1 | O-RING, -012, 70 Duro, .364″ ID x .070″ Thk |
| 5 | 211-1009 | 1 | BALL, 9/32; 24,CRS |
| 6 | 445494A1 | 1 | SPRING, VALVE |
| 7 | 100-2131 | 1 | RING, SNAP, 0.312″, Int, #31 |
| 8 | 86988656 | 1 | WASHER, SPRING |
06-06 SPEED TRANSMISSION – INPUT SHAFT WITHOUT CREEP SPEED
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 225199A1 | 1 | SHAFT ASSY., Inc. 3 – 5 |
| 3 | 1342851C1 | 2 | PLUG, 10 mm |
| 4 | 1963888C1 | 2 | PIN |
| 5 | 38-3605 | 4 | PIN, 3/32″ x 5/16″, Coiled |
| 8 | 86987595 | 1 | CARRIER |
| 9 | 93350C1 | 6 | RING |
| 10 | 1286081C1 | 2 | O-RING |
| 11 | 1286076C1 | 2 | RING |
| 12 | 242492A5 | 2 | PISTON |
| 13 | 1286083C1 | 2 | O-RING |
| 14 | 1286079C1 | 2 | RING |
| 19 | 87738316 | 2 | DISC, Separator |
| 20 | 86990276 | 14 | DISC, Friction |
| 21 | 92934C2 | 12 | DISC, Separator |
| 22 | 1342645C3 | 2 | DISC, CLUTCH |
| 23 | 1285996C1 | 2 | RING, SNAP |
| 24 | 1286012C2 | 26 | WASHER |
| 25 | 1286043C1 | 6 | WASHER, THRUST |
| 28 | 572182R1 | 3 | BEARING, THRUST |
| 29 | 80907C1 | 2 | BEARING, NEEDLE |
| 30 | 93297C1 | 1 | SPACER |
| 31 | 1342495C1 | 1 | GEAR, DRIVEN, 37T |
| 32 | 1286052C1 | 2 | RING |
| 33 | 1286042C1 | 2 | WASHER, THRUST |
| 36 | K620185 | 1 | BEARING, THRUST |
| 38 | 1285985C1 | 1 | GEAR, WHEEL, 34T |
| 39 | 1286016C1 | 1 | BEARING, NEEDLE |
| 40 | 1286039C1 | 2 | SPACER |
| 41 | 364465C1 | 1 | BEARING, CONE |
| 42 | 258452C1 | 1 | BEARING, CUP |
| 43 | 1286026C1 | 5 | RING |
| 44 | 254574A2 | 1 | CAGE |
| 48 | 613-10030 | 4 | BOLT, Hex, M10 x 30, 8.8, Full Thd, M10 x 30 |
| 49 | 1286071C1 | 2 | SHIM, 0.080mm Thk |
| 49 | 1286072C1 | 2 | SHIM, 0.100mm Thk |
| 49 | 1286073C1 | 2 | SHIM, 0.130mm Thk |
| 49 | 1286074C1 | 2 | SHIM, 0.300mm Thk |
| 49 | 1286075C1 | 2 | SHIM, 0.760mm Thk |
| 50 | 1981207C1 | 1 | TUBE |
| 52 | 627639R1 | 1 | BEARING, CONE |
| 53 | ST970 | 1 | BEARING, CUP |
| 55 | 258470A2 | 1 | SUPPORT, Inc. 8 |
| 56 | 37-188 | 8 | DOWEL, 1/2″ x 1/2″, 1/2 x 1/2 in |
| 57 | 613-12040 | 11 | BOLT, Hex, M12 x 40, 8.8, Full Thd |
| 60 | 282726A1 | 1 | SHAFT, Inc. 61, 62 |
| 61 | 38-3605 | 1 | PIN, 3/32″ x 5/16″, Coiled |
| 62 | 284151A1 | 1 | SCREW, M10 x 10 |
| 63 | 226637A1 | 1 | COUPLING, SPLINED |
06-07 SPEED TRANSMISSION – INPUT SHAFT WITH CREEP SPEED
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 225200A1 | 1 | SHAFT ASSY., Inc. 3 – 5 |
| 3 | 1342851C1 | 2 | PLUG, 10 mm |
| 4 | 1963888C1 | 2 | PIN |
| 5 | 38-3605 | 5 | PIN, 3/32″ x 5/16″, Coiled |
| 8 | 86987595 | 1 | CARRIER |
| 9 | 93350C1 | 6 | RING |
| 10 | 1286081C1 | 2 | O-RING |
| 11 | 1286076C1 | 2 | RING |
| 12 | 242492A5 | 2 | PISTON |
| 13 | 1286083C1 | 2 | O-RING |
| 14 | 1286079C1 | 2 | RING |
| 19 | 87738316 | 2 | DISC, Separator |
| 20 | 86990276 | 14 | DISC, Friction |
| 21 | 92934C2 | 12 | DISC, Separator |
| 22 | 1342645C3 | 2 | DISC, CLUTCH |
| 23 | 1285996C1 | 2 | RING, SNAP |
| 24 | 1286012C2 | 26 | WASHER |
| 25 | 1286043C1 | 6 | WASHER, THRUST |
| 28 | 572182R1 | 3 | BEARING, THRUST |
| 29 | 80907C1 | 2 | BEARING, NEEDLE |
| 30 | 93297C1 | 1 | SPACER |
| 31 | 1342495C1 | 1 | GEAR, DRIVEN, 37T |
| 32 | 1286052C1 | 2 | RING |
| 33 | 1286042C1 | 2 | WASHER, THRUST |
| 36 | K620185 | 1 | BEARING, THRUST |
| 37 | 92793C1 | 1 | RING |
| 38 | 1285985C1 | 1 | GEAR, WHEEL, 34T |
| 39 | 1286016C1 | 1 | BEARING, NEEDLE |
| 40 | 1286039C1 | 2 | SPACER |
| 41 | 364465C1 | 1 | BEARING, CONE |
| 42 | 258452C1 | 1 | BEARING, CUP |
| 43 | 1286026C1 | 5 | RING |
| 44 | 254574A2 | 1 | CAGE |
| 48 | 613-10030 | 4 | BOLT, Hex, M10 x 30, 8.8, Full Thd, M10 x 30 |
| 49 | 1286071C1 | 2 | SHIM, 0.080mm Thk |
| 49 | 1286072C1 | 2 | SHIM, 0.100mm Thk |
| 49 | 1286073C1 | 2 | SHIM, 0.130mm Thk |
| 49 | 1286074C1 | 2 | SHIM, 0.300mm Thk |
| 49 | 1286075C1 | 2 | SHIM, 0.760mm Thk |
| 50 | 1981207C1 | 1 | TUBE |
| 52 | L33289 | 1 | BEARING, CONE, 2-1/4 inch ID |
| 53 | 105497H | 1 | BEARING, CUP |
| 55 | 256235A2 | 1 | SUPPORT ASSY., Inc. 56 |
| 56 | 37-188 | 9 | DOWEL, 1/2″ x 1/2″, 1/2 x 1/2 in |
| 57 | 613-12040 | 11 | BOLT, Hex, M12 x 40, 8.8, Full Thd |
| 58 | 230042A1 | 1 | GEAR, 17T |
| 60 | 282724A1 | 1 | SHAFT, Inc. 61, 62 |
| 61 | 38-3605 | 1 | PIN, 3/32″ x 5/16″, Coiled |
| 62 | 284151A1 | 1 | SCREW, M10 x 10 |
06-08 SPEED TRANSMISSION – COUNTERSHAFT WITHOUT CREEP SPEED
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1342253C2 | 1 | SHAFT |
| 2 | 100-11293 | 2 | RING, SNAP, #293, Ext |
| 4 | 1285983C1 | 1 | GEAR, DRIVING, Drive, 34T |
| 5 | 211-1012 | 4 | BALL, 3/8″ Dia, 3/8; 24,CRS |
| 7 | ST791 | 1 | BEARING, CONE |
| 8 | ST951 | 1 | BEARING, CUP |
| 11 | 1285981C1 | 1 | PINION, Drive, 29 T |
| 12 | ST2051 | 1 | BEARING, CONE |
| 13 | ST863 | 1 | BEARING, CUP |
| 14 | 1286000C3 | 1 | CAGE |
| 18 | 613-10025 | 6 | BOLT, Hex, M10 x 25, 8.8, Full Thd, M10 x 25; 8.8 |
| 20 | 1285989C1 | 1 | PINION, Driven, 37T |
| 22 | 1285986C1 | 1 | PINION, Driven, 39T |
06-09 SPEED TRANSMISSION – COUNTERSHAFT WITH CREEP SPEED
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1342318C2 | 1 | SHAFT, Inc. 2 – 4 |
| 2 | 1286084C1 | 1 | PIN, 12 mm |
| 3 | 92825C1 | 1 | PLUG |
| 4 | 1963875C1 | 1 | PIN, SPLIT (COTTER) |
| 5 | 211-1012 | 4 | BALL, 3/8″ Dia, 3/8; 24,CRS |
| 7 | 100-11293 | 1 | RING, SNAP, #293, Ext |
| 9 | 1285983C1 | 1 | GEAR, DRIVING, Drive, 34T |
| 10 | 144242C3 | 2 | RING, 33 mm |
| 11 | 92828C1 | 1 | CAGE |
| 12 | 613-10025 | 6 | BOLT, Hex, M10 x 25, 8.8, Full Thd, M10 x 25; 8.8 |
| 20 | 92824C1 | 1 | SPACER |
| 21 | 86991568 | 1 | CARRIER |
| 22 | 1286081C1 | 1 | O-RING |
| 25 | 1286076C1 | 1 | RING |
| 26 | 242492A5 | 1 | PISTON |
| 27 | 1286083C1 | 1 | O-RING |
| 28 | 1286079C1 | 1 | RING |
| 34 | 87738316 | 1 | DISC, Separator |
| 35 | 86990276 | 8 | DISC, Friction |
| 36 | 92934C2 | 7 | DISC, Separator |
| 37 | 1342645C3 | 1 | DISC, CLUTCH |
| 38 | 1285996C1 | 1 | RING, SNAP |
| 39 | 93350C1 | 2 | RING |
| 40 | 1286012C2 | 13 | WASHER |
| 41 | 1286043C1 | 2 | WASHER, THRUST |
| 42 | 572182R1 | 1 | BEARING, THRUST |
| 43 | 1286052C1 | 1 | RING |
| 51 | 92795C1 | 1 | PINION |
| 52 | 80906C1 | 1 | BEARING, NEEDLE |
| 53 | 1286042C1 | 2 | WASHER, THRUST |
| 54 | K620185 | 1 | BEARING, THRUST |
| 55 | ST2051 | 2 | BEARING, CONE |
| 56 | ST863 | 2 | BEARING, CUP |
| 58 | 1285986C1 | 1 | PINION, Driven, 39T |
| 61 | 1285989C1 | 1 | PINION, Driven, 37T |
| 62 | 1285981C1 | 1 | PINION, Drive, 29T |
06-10 SPEED TRANSMISSION – OUTPUT SHAFT FRONT CLUTCH
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 230135A2 | 1 | SHAFT, Inc. 2, 4, 5 |
| 2 | 187516A1 | 3 | PLUG, 12 mm |
| 4 | 38-3605 | 6 | PIN, 3/32″ x 5/16″, Coiled |
| 5 | 1963875C1 | 4 | PIN, SPLIT (COTTER) |
| 8 | 1286040C2 | 1 | RING |
| 9 | 1997888C1 | 1 | WASHER, THRUST |
| 10 | 1286016C1 | 1 | BEARING, NEEDLE |
| 11 | 1285985C1 | 1 | GEAR, WHEEL, 34T |
| 12 | 1285987C1 | 1 | PINION, 39T |
| 13 | 1286052C1 | 2 | RING |
| 16 | 1286043C1 | 4 | WASHER, THRUST |
| 17 | 572182R1 | 2 | BEARING, THRUST |
| 18 | 93350C1 | 4 | RING |
| 19 | 1286012C2 | 24 | WASHER |
| 20 | 86987594 | 1 | CARRIER |
| 22 | 1286081C1 | 2 | O-RING |
| 23 | 1286076C1 | 2 | RING |
| 24 | 242492A5 | 2 | PISTON |
| 25 | 1286083C1 | 2 | O-RING |
| 26 | 1286079C1 | 2 | RING |
| 30 | 87738316 | 2 | DISC, Separator |
| 31 | 86990276 | 14 | DISC, Friction |
| 32 | 92934C2 | 12 | DISC, Separator |
| 33 | 1342645C3 | 2 | DISC, CLUTCH |
| 34 | 1285996C1 | 2 | RING, SNAP |
| 36 | 80907C1 | 1 | BEARING, NEEDLE |
| 37 | 1342513C1 | 1 | SPACER |
| 39 | 1286042C1 | 2 | WASHER, THRUST |
| 40 | K620185 | 1 | BEARING, THRUST |
| 44 | 219530H1 | 1 | BEARING, CONE |
| 45 | ST964 | 1 | BEARING, CUP |
| 46 | 1286024C1 | 4 | RING |
| 47 | 238-5223 | 1 | O-RING, -223, 70 Duro, 1.609″ ID x .139″ Thk |
06-11 SPEED TRANSMISSION – OUTPUT SHAFT REAR CLUTCH
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 230135A2 | 1 | SHAFT, , See Figure 06-10 |
| 2 | 238-5223 | 1 | O-RING, -223, 70 Duro, 1.609″ ID x .139″ Thk |
| 10 | 1286016C1 | 1 | BEARING, NEEDLE |
| 13 | 1286052C1 | 2 | RING |
| 16 | 1286043C1 | 4 | WASHER, THRUST |
| 17 | 572182R1 | 2 | BEARING, THRUST |
| 18 | 93350C1 | 4 | RING |
| 19 | 1286012C2 | 26 | WASHER |
| 21 | 86987593 | 1 | CARRIER |
| 22 | 1286081C1 | 2 | O-RING |
| 23 | 1286076C1 | 2 | RING |
| 24 | 86987597 | 2 | PISTON |
| 25 | 1286083C1 | 2 | O-RING |
| 26 | 1286079C1 | 2 | RING |
| 31 | 86990276 | 20 | DISC, Friction |
| 32 | 92934C2 | 20 | DISC, Separator |
| 33 | 1342645C3 | 2 | DISC, CLUTCH |
| 34 | 1285996C1 | 2 | RING, SNAP |
| 35 | 86987609 | 1 | GEAR, 39T |
| 37 | 1285982C1 | 1 | GEAR, DRIVEN, 44T |
| 38 | 1285997C1 | 1 | BEARING, NEEDLE |
| 39 | 1286042C1 | 2 | WASHER, THRUST |
| 40 | K620185 | 1 | BEARING, THRUST |
| 47 | 1286021C1 | 1 | BEARING, ROLLER |
| 48 | 29214H | 1 | BEARING, CUP, 4-5/16 OD |
| 49 | 1286001C4 | 1 | CAGE |
| 50 | 1286061C1 | 2 | SHIM, 0.080mm Thk |
| 50 | 1286062C1 | 2 | SHIM, 0.100mm Thk |
| 50 | 1286063C1 | 2 | SHIM, 0.130mm Thk |
| 50 | 1286064C1 | 2 | SHIM, 0.300mm Thk |
| 50 | 1286065C1 | 2 | SHIM, 0.760mm Thk |
| 51 | 613-10030 | 6 | BOLT, Hex, M10 x 30, 8.8, Full Thd, M10 x 30 |
06-12 RANGE TRANSMISSION – HOUSING
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 396069A4 | 1 | HOUSING ASSY., Inc. 2 – 8 |
| 2 | 837-16035 | 4 | DOWEL, M16 x 35, 16 x 35 mm |
| 3 | 837-12025 | 2 | DOWEL, M12 x 25 |
| 4 | 192792A1 | 1 | PLUG, 3/4 in |
| 5 | 327080A1 | 1 | PLUG, 1-1/4 |
| 6 | 41-1018 | 1 | PLUG, Cup, 1 1/8″ |
| 7 | 41-1038 | 1 | PLUG, Cup, 2 3/8″, 2-3/8 |
| 8 | 238-6112 | 1 | O-RING, -112, 90 Duro, .487″ ID x .103″ Thk |
| 9 | 828-16080 | 2 | BOLT, Hex, M16 x 80, 10.9 |
| 10 | 828-16060 | 2 | BOLT, Hex, M16 x 60, 10.9, Full Thd |
| 11 | 828-16060 | 17 | BOLT, Hex, M16 x 60, 10.9, Full Thd |
| 12 | 828-16110 | 1 | BOLT, Hex, M16 x 110, 10.9 |
| 13 | 896-12016 | 24 | WASHER, M17.5 x 30 x 4, HT |
| 14 | 829-1316 | 1 | NUT, M16, Cl 10 |
| 20 | 93364C1 | 1 | COVER |
| 21 | 628-10025 | 12 | BOLT, Hex, M10 x 25, 10.9, Full Thd |
| 22 | 225209A1 | 1 | COVER |
| 23 | 628-10025 | 7 | BOLT, Hex, M10 x 25, 10.9, Full Thd |
| 24 | 301533R1 | 1 | BEARING, NEEDLE |
| 25 | 536850R1 | 1 | HEATER, 120 Volt |
| 30 | 235976A2 | 1 | TUBE |
| 31 | 256544A1 | 3 | TUBE |
| 32 | 238-5014 | 8 | O-RING, -014, 70 Duro, .489″ ID x .070″ Thk |
| 33 | 300828A1 | 1 | TUBE |
| 34 | 238-5019 | 2 | O-RING, -019, 70 Duro, .801″ ID x .070″ Thk |
| 35 | 253385A2 | 1 | GASKET |
| 36 | 445537A2 | 1 | VALVE, Inching, See Figure 06-13 |
| 37 | 861-10045 | 4 | SCREW, Hex Soc Hd, M10 x 45, 12.9 |
| 38 | 87390949 | 1 | GASKET |
| 39 | 92821C2 | 1 | GASKET |
| 40 | 828-16080 | 1 | BOLT, Hex, M16 x 80, 10.9 |
| 41 | 896-12020 | 1 | WASHER, M20 x 37.5 x 4, HT, 22 x 37 x 4 mm |
| 42 | 828-20090 | 1 | BOLT, Hex, M20 x 90, 10.9 |
| 43 | 87422106 | 1 | SENSOR, Speed, Transmission BSN AJB0372635 |
| 43 | 87548198 | 1 | SENSOR, Speed, Transmission ASN AJB0372635 |
| 44 | 87631267 | 1 | HARNESS, WIRE, Speed Sensor, Transmission ASN AJB0372635 |
06-13 VALVE ASSY – INCHING
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 221578A1 | 1 | PLUG, Hex Soc, M18 x 1.5, ORB, Incl. 3 |
| 3 | 637-63153 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 4 | 221580A1 | 1 | PLUG, Hex Soc, M27 x 2, ORB, Inc. 5 |
| 5 | 637-64236 | 1 | O-RING, Cl 6, 23.6MM ID x 2.9 Thk |
| 9 | 238-7016 | 1 | O-RING, -016, Cl 7, .614″ ID x .070″ Thk |
| 10 | 238-7018 | 1 | O-RING, -018, Cl 7, .739″ ID x .070″ Thk |
| 11 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 12 | 238-5014 | 1 | O-RING, -014, 70 Duro, .489″ ID x .070″ Thk |
| 13 | 238-5013 | 1 | O-RING, -013, 70 Duro, .426″ ID x .070″ Thk |
| 20 | 221576A1 | 1 | PLUG, Hex Soc, M14 x 1.5, ORB, Incl. 21 |
| 21 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 28 | 221576A1 | 1 | PLUG, Hex Soc, M14 x 1.5, ORB, Incl. 29 |
| 29 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 31 | 445494A1 | 1 | SPRING, VALVE |
| 32 | 238-5012 | 1 | O-RING, -012, 70 Duro, .364″ ID x .070″ Thk |
| 33 | 211-1009 | 1 | BALL, 9/32; 24,CRS |
| 34 | 100-2131 | 1 | RING, SNAP, 0.312″, Int, #31 |
| 35 | 86988656 | 1 | WASHER, SPRING |
| 36 | 253385A2 | 1 | GASKET |
| 37 | 861-10045 | 4 | SCREW, Hex Soc Hd, M10 x 45, 12.9 |
06-14 RANGE TRANSMISSION – INPUT SHAFT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1997446C2 | 1 | SHAFT ASSY., Inc. 2 – 4 |
| 2 | 187516A1 | 4 | PLUG |
| 3 | 38-3605 | 5 | PIN, 3/32″ x 5/16″, Coiled |
| 4 | 1963874C1 | 1 | PIN, 5/16 x 14 mm |
| 8 | 1286040C2 | 1 | RING |
| 9 | 1997888C1 | 1 | WASHER, THRUST |
| 10 | 80909C1 | 2 | BEARING, NEEDLE |
| 11 | 86987610 | 1 | GEAR, 37T |
| 12 | 86987612 | 1 | PINION, 59T |
| 13 | 1286052C1 | 2 | RING |
| 14 | 1286043C1 | 4 | WASHER, THRUST |
| 18 | 572182R1 | 2 | BEARING, THRUST |
| 19 | 93350C1 | 6 | RING |
| 20 | 1286012C2 | 26 | WASHER |
| 21 | 86987596 | 2 | CARRIER |
| 22 | 1286081C1 | 2 | O-RING |
| 23 | 1286076C1 | 2 | RING |
| 24 | 86987597 | 2 | PISTON |
| 25 | 1286083C1 | 2 | O-RING |
| 26 | 1286079C1 | 2 | RING |
| 31 | 86990276 | 22 | DISC, Friction |
| 32 | 92934C2 | 22 | DISC, Separator |
| 33 | 1342645C3 | 2 | DISC, CLUTCH |
| 34 | 1285996C1 | 2 | RING, SNAP |
| 35 | 1285971C1 | 1 | GEAR, DRIVING |
| 36 | A75211 | 1 | BEARING, CONE |
| 37 | A75210 | 1 | BEARING, CUP |
| 39 | ST2063 | 1 | BEARING, CONE |
| 40 | 54404R1 | 1 | BEARING, CUP |
| 44 | 281696A1 | 1 | SUPPORT |
| 45 | 814-12050 | 6 | BOLT, Hex, M12 x 50, 8.8 |
| 46 | 1286025C1 | 4 | RING |
| 47 | 254337A2 | 1 | CAGE |
| 48 | 1286061C1 | 2 | SHIM, 0.080mm Thk |
| 48 | 1286062C1 | 2 | SHIM, 0.100mm Thk |
| 48 | 1286063C1 | 2 | SHIM, 0.130mm Thk |
| 48 | 1286064C1 | 2 | SHIM, 0.300mm Thk |
| 48 | 1286065C1 | 2 | SHIM, 0.760mm Thk |
| 49 | 613-10030 | 3 | BOLT, Hex, M10 x 30, 8.8, Full Thd, M10 x 30 |
06-15 RANGE TRANSMISSION – MASTER CLUTCH
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1997446C2 | 1 | SHAFT ASSY., , See Figure 06-14 |
| 2 | 254337A2 | 1 | CAGE |
| 3 | 101-11225 | 1 | RING, SNAP, #225, Ext |
| 4 | 1286027C2 | 1 | RING |
| 10 | 243091A1 | 1 | CARRIER |
| 11 | 93138C1 | 1 | RING, PISTON |
| 13 | 93137C1 | 1 | RING, PISTON |
| 14 | 92561C1 | 1 | RING |
| 15 | 112299A2 | 1 | PISTON ASSY |
| 18 | 93136C2 | 16 | SPRING |
| 19 | 112329A2 | 1 | RETAINER |
| 21 | 100-11306 | 1 | RING, SNAP, #306, Ext |
| 22 | 92555C1 | 1 | RING |
| 23 | 235913A2 | 1 | HUB |
| 24 | 235987A1 | 1 | RING |
| 27 | 100-11200 | 1 | RING, SNAP, #200, Ext |
| 31 | 1285974C1 | 9 | PLATE, BRAKE, Separator |
| 32 | 1285975C2 | 9 | DISC, CLUTCH, Friction |
| 33 | 235851A2 | 1 | DISC, Backing |
| 34 | 1963876C1 | 1 | RING, SNAP |
| 43 | 218-5105 | 1 | ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, O-Ring, Inc. 44 |
| 45 | 1963935C2 | 1 | TUBE |
| 44 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
06-16 RANGE TRANSMISSION – COUNTERSHAFT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1954059C2 | 1 | SHAFT, Inc. 2 |
| 2 | 38-3605 | 3 | PIN, 3/32″ x 5/16″, Coiled |
| 3 | D63322 | 1 | BEARING, NEEDLE |
| 4 | 144348C1 | 1 | RING, SNAP |
| 5 | 1286012C2 | 13 | WASHER |
| 8 | 1286043C1 | 2 | WASHER, THRUST |
| 9 | 572182R1 | 1 | BEARING, THRUST |
| 10 | 101-11250 | 1 | RING, SNAP, #250, 2.356, Ext |
| 11 | 1285978C1 | 1 | PINION, 39T |
| 12 | 1286052C1 | 1 | RING |
| 13 | 220057A1 | 1 | GEAR, 25T |
| 14 | 1286041C2 | 1 | SPACER |
| 15 | 1285990C1 | 1 | PINION, 23T |
| 18 | 253485A1 | 1 | BEARING, CONE |
| 19 | 253486A1 | 1 | BEARING, CUP |
| 20 | 1286042C1 | 4 | WASHER, THRUST |
| 21 | K620185 | 2 | BEARING, THRUST |
| 22 | 297134A1 | 1 | GEAR, 54T |
| 23 | 1286077C1 | 1 | RING |
| 24 | 1286081C1 | 1 | O-RING |
| 25 | 242491A5 | 1 | PISTON |
| 26 | 1286079C1 | 1 | RING |
| 27 | 1286083C1 | 1 | O-RING |
| 31 | 87738316 | 1 | DISC, Separator |
| 32 | 86990276 | 15 | DISC, Friction |
| 33 | 92934C2 | 14 | DISC, Separator |
| 34 | 1342645C3 | 1 | DISC, CLUTCH |
| 35 | 1285996C1 | 1 | RING, SNAP |
| 36 | 1286028C2 | 2 | RING |
| 37 | 297418A2 | 2 | SEAL |
| 39 | 80907C1 | 2 | BEARING, NEEDLE |
| 40 | 93269C1 | 1 | SPACER |
| 41 | 1286038C2 | 1 | SPACER |
| 42 | 287679C1 | 1 | BEARING, ROLLER |
| 43 | 1968297C1 | 1 | BEARING, CUP |
| 44 | 257099A2 | 1 | CAGE, Inc. 45 |
| 45 | 1345888C1 | 1 | PLUG |
| 47 | 613-10030 | 4 | BOLT, Hex, M10 x 30, 8.8, Full Thd, M10 x 30 |
| 50 | 1286066C1 | 2 | SHIM, 0.08mm Thk |
| 50 | 1286067C1 | 2 | SHIM, 0.10mm Thk |
| 50 | 1286068C1 | 2 | SHIM, 0.13mm Thk |
| 50 | 1286069C1 | 2 | SHIM, 0.30mm Thk |
| 50 | 1286070C1 | 2 | SHIM, 0.76mm Thk |
06-17 TRANSMISSION – PINION SHAFT AND GEARS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 94616C2 | 1 | GEAR, BEVEL, Inc. 2 |
| 2 | 92825C1 | 1 | PLUG |
| 3 | 87618938 | 1 | GEAR, DRIVEN, 46T |
| 4 | 1286039C1 | 1 | SPACER |
| 5 | 143906C1 | 1 | RING, SNAP |
| 6 | 921684C1 | 1 | BEARING, CONE |
| 7 | 1068264C1 | 1 | CAGE, Inc. 8 |
| 8 | 921683C1 | 1 | BEARING, CUP |
| 10 | 120965C1 | 1 | RING, SNAP |
| 11 | 108326H | 1 | BEARING, CUP |
| 12 | 94666C1 | 1 | BEARING, CONE |
| 13 | 131432A1 | 1 | RING, 3,62 mm |
| 13 | 94661C1 | 1 | RING, 3,70 mm |
| 13 | 94662C1 | 1 | RING, 3,78 mm |
| 13 | 94663C1 | 1 | RING, 3,86 mm |
| 13 | 110042C1 | 1 | RING, 3,93 mm |
| 13 | 94664C1 | 1 | RING, 4,02 mm |
| 13 | 131433A1 | 1 | RING, 4,10 mm |
| 13 | 131434A1 | 1 | RING, 4,18 mm |
| 17 | 120977C1 | 2 | SHIM, 0.076mm Thk |
| 17 | 120978C1 | 2 | SHIM, 0.100mm Thk |
| 17 | 120979C1 | 2 | SHIM, 0.130mm Thk |
| 17 | 120980C1 | 2 | SHIM, 0.300mm Thk |
| 18 | 566-12035 | 6 | SCREW, 12 Pt Hd, M10 x 35, 12.9, M12 x 35; 12,9 |
| 19 | 1251958C1 | 6 | WASHER |
06-18 TRANSMISSION – DIFFERENTIAL
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 229594A1 | 1 | CAGE |
| 3 | 137023A1 | 6 | DOWEL, 10 x 60 mm |
| 4 | 148939C1 | 2 | SEAL |
| 7 | 1259633C3 | 1 | GEAR |
| 8 | 92905C1 | 4 | PINION, 10T |
| 9 | 1259634C3 | 1 | PINION |
| 10 | 227116A2 | 1 | WASHER, THRUST |
| 11 | 227117A2 | 1 | WASHER, THRUST |
| 12 | 92718C2 | 4 | WASHER |
| 13 | 92906C1 | 2 | SHAFT, SHORT |
| 14 | 92907C1 | 1 | SHAFT |
| 15 | 1997421C1 | 2 | BOLT |
| 19 | 1289349C1 | 1 | SPACER |
| 20 | 1289350C1 | 2 | SPACER |
| 21 | 1270697C1 | 112 | NEEDLE, 28 Per Gear |
| 22 | 1289348C1 | 4 | RING |
| 23 | 622336C1 | 1 | BEARING, CONE |
| 25 | A63171 | 1 | BEARING, CUP |
| 29 | 229593A1 | 1 | COVER |
| 30 | 896-11016 | 12 | WASHER, M17.5 x 30 x 4, HT |
| 31 | 828-16055 | 12 | BOLT, Hex, M16 x 55, 10.9, Full Thd |
| 32 | 67250C1 | 1 | BEARING, BALL |
| 33 | 67251C1 | 1 | BEARING, CUP |
| 34 | 120503C2 | 1 | RETAINER |
| 35 | 136433A1 | 5 | DOWEL, 12 x 65 mm |
| 36 | 139059C1 | 1 | SEAL |
| 40 | 139060C2 | 2 | RING |
| 41 | 1997369C2 | 1 | RETAINER |
| 43 | 136433A1 | 5 | DOWEL, 12 x 65 mm |
| 44 | 139059C1 | 1 | SEAL |
| 45 | 139060C2 | 1 | RING |
| 46 | 613-16040 | 3 | BOLT, Hex, M16 x 40, 8.8, Full Thd, Hex, M16 x 40, 8.8, Full Thd |
| 46 | 613-16045 | 3 | BOLT, Hex, M16 x 45, 8.8, Full Thd, Hex, M16 x 45, 8.8, Full Thd |
| 50 | 1997422C1 | 1 | PISTON |
| 55 | 120679C1 | 3 | PLATE |
| 56 | 92915C1 | 4 | PLATE |
| 57 | 409738A1 | 1 | TUBE |
| 58 | 238-5115 | 1 | O-RING, -115, 70 Duro, .674″ ID x .103″ Thk |
06-19 RANGE TRANSMISSION – MFD CLUTCH
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 199320A1 | 1 | SHAFT |
| 2 | 877-11010 | 1 | SET SCREW, Hex Soc, M10 x 10, Cup Pt, M10 x 10 |
| 3 | 630694C1 | 2 | BEARING, CONE |
| 4 | 630695C1 | 2 | BEARING, CUP |
| 5 | 222856A1 | 1 | PINION |
| 6 | 101-21412 | 2 | RING, SNAP, #412, 4.430″, Int |
| 7 | 128297A1 | 1 | DISC, CLUTCH |
| 8 | 101-11400 | 1 | RING, SNAP, #400, 3.771, Ext, No. 400 |
| 9 | 87738316 | 12 | DISC, Separator |
| 10 | 1997907C1 | 13 | PLATE |
| 11 | 92562C1 | 1 | RING |
| 12 | 93138C1 | 1 | RING, PISTON |
| 13 | 1997879C1 | 1 | SEAL |
| 14 | 238-7037 | 1 | O-RING, -037, Cl 7, 2.489″ ID x .070″ Thk |
| 15 | 123135A1 | 1 | WASHER |
| 16 | 123517A1 | 1 | SNAP RING |
| 18 | 121192A1 | 1 | WASHER, THRUST |
| 19 | 1997880C1 | 4 | SPRING, BELLEVILLE |
| 20 | 231935A2 | 1 | PISTON |
| 21 | 1286024C1 | 2 | RING |
| 22 | 1997885C1 | 1 | SEAL, OIL |
| 23 | 1997891C1 | 1 | RING, SNAP |
| 24 | 1277309C1 | 1 | WASHER |
| 28 | 117853A1 | 1 | HOUSING |
| 29 | 782-84413 | 3 | SCREW, SELF TAPPING, Hex Wash Hd, M4.8 x 13, M4,8 X 13 |
| 30 | 1997881C1 | 1 | SHIELD |
| 31 | 806-8016 | 3 | BOLT, Hex, Lock, M8 x 16, Cl 10.9, M8 x 16; 10.9 |
| 33 | 93201C1 | 1 | TUBE |
| 34 | 238-5013 | 2 | O-RING, -013, 70 Duro, .426″ ID x .070″ Thk |
| 35 | 201-102 | 1 | CONNECTOR, HYD., 13/16″-16 ORFS x 3/4″-16 ORB, Includes 36, 37 |
| 36 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 37 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 38 | 258154A3 | 1 | TUBE |
| 39 | 86579691 | 1 | ELBOW, 90є, 13/16″-18 ORFS x M18 x 1.5 ORB, Inc. 40 – 41 |
| 40 | 86598101 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 41 | 9992298 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 42 | 515-23127 | 1 | CLAMP, 1/2″, Insul, 3/8″ Bolt |
| 43 | 614-10020 | 1 | BOLT, Hex, M10 x 20, 8.8, Full Thd |
| 67 | 814-10050 | 6 | BOLT, Hex, M10 x 50, 8.8 |
| 68 | 124306A1 | 1 | PIPE |
| 73 | 128297A1 | 1 | DISC, CLUTCH |
| 74 | 198519A3 | 1 | HUB ASSY., Inc. 75, 76 |
| 75 | 112822R91 | 1 | BEARING |
| 76 | F19478 | 1 | BEARING |
| 79 | 218-5351 | 1 | CONNECTOR, HYD., 3/4″-16, 37є x 9/16″-18, O-Ring, 3/4 fl x 9/16 Or, Inc. 80 |
| 81 | 214389 | 1 | PLUG, Hex Hd, 3/4″-16 ORB, Includes Ref. 82, Without Mechanical Front Drive |
| 82 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 80 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
06-20 MFD AXLE – DRIVE SHAFT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 258853A2 | 1 | SHAFT, DRIVE, Inc. 2, 3 |
| 2 | 258854A2 | 2 | SPIDER, U-JOINT |
| 3 | 828-10045 | 8 | BOLT, Hex, M10 x 45, 10.9 |
| 4 | 258855A1 | 1 | YOKE |
| 5 | 828-10045 | 8 | BOLT, Hex, M10 x 45, 10.9 |
| 11 | 87400216 | 2 | FASTENER |
| 13 | 199922A2 | 1 | CAGE |
| 17 | 199923A1 | 1 | SPACER |
| 18 | 235519A1 | 2 | BEARING, CONE |
| 19 | 663558R1 | 2 | BEARING, CUP, 2-57/64 OD |
| 20 | 199981A1 | 1 | RING, SNAP |
| 23 | 222732A1 | 1 | RING, SNAP |
| 24 | 226851A1 | 1 | SEAL, OIL |
| 25 | 628-20060 | 2 | BOLT, Hex, M20 x 60, 10.9, Full Thd |
| 26 | 828-20150 | 2 | BOLT, Hex, M20 x 150, 10.9, M20 x 150; 10.9 |
| 27 | 896-12020 | 4 | WASHER, M20 x 37.5 x 4, HT, 22 x 37 x 4 mm |
| 28 | 197595A3 | 1 | SHAFT |
| 30 | 205369R91 | 1 | BEARING, NEEDLE |
| 32 | 238-5043 | 1 | O-RING, -043, 70 Duro, 3.489″ ID x .070″ Thk |
| 35 | 238-5220 | 1 | O-RING, -220, 70 Duro, 1.359″ ID x .139″ Thk |
| 37 | 221943A1 | 1 | WASHER |
| 38 | 628-16050 | 1 | BOLT, Hex, M16 x 50, 10.9, Full Thd |
06-21 TRANSMISSION CONTROL VALVE LOCATION
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 450729A2 | 1 | VALVE, , See Figure 06-22 |
| 2 | 450724A2 | 1 | VALVE, , See Figure 06-23, Without Creep Speed |
| 2 | 450728A2 | 1 | VALVE, , With Creep Speed, See Figure 06-24 |
| 3 | 450728A2 | 1 | VALVE, , See Figure 06-24 |
06-22 VALVE ASSEMBLY – TRANSMISSION CONTROL (450729A2)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 221576A1 | 4 | PLUG, Hex Soc, M14 x 1.5, ORB, Incl. 3 |
| 3 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 4 | 87421157 | 4 | SOLENOID, Inc. 5 – 7 |
| 6 | 238-7016 | 1 | O-RING, -016, Cl 7, .614″ ID x .070″ Thk |
| 7 | 238-7015 | 1 | O-RING, -015, Cl 7, .551″ ID x .070″ Thk |
| 8 | 86985026 | 1 | COVER |
| 9 | 864-5010 | 6 | SCREW, Hex Soc Hd, M5 x 10, 8.8 |
| 10 | 444196A1 | 1 | GASKET |
| 11 | 864-10055 | 4 | SCREW, Hex Soc Hd, M10 x 55, 8.8, M10 x 55 mm |
| 12 | 86987513 | 1 | SENSOR, Pressure, Inc. 13 |
| 13 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
06-23 VALVE ASSEMBLY – TRANSMISSION CONTROL (450724A2)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 221576A1 | 4 | PLUG, Hex Soc, M14 x 1.5, ORB, Incl. 3 |
| 3 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 6 | 252462A2 | 1 | NUT |
| 7 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk |
| 8 | 238-5015 | 1 | O-RING, -015, 70 Duro, .551″ ID x .070″ Thk |
| 9 | 256633A1 | 1 | O-RING, 12,9 ID x 1,24 mm |
| 10 | 238-7115 | 2 | O-RING, -115, Cl 7, .674″ ID x .103″ Thk |
| 11 | 87421157 | 2 | SOLENOID, Inc. 12 – 14 |
| 13 | 238-7016 | 1 | O-RING, -016, Cl 7, .614″ ID x .070″ Thk |
| 14 | 238-7015 | 1 | O-RING, -015, Cl 7, .551″ ID x .070″ Thk |
| 15 | 86984122 | 1 | PLUG, Inc. 16 – 18 |
| 16 | 87014033 | 1 | O-RING, -019, Cl 7, .801″ ID x .070″ Thk |
| 17 | 238-7016 | 1 | O-RING, -016, Cl 7, .614″ ID x .070″ Thk |
| 18 | 238-7015 | 1 | O-RING, -015, Cl 7, .551″ ID x .070″ Thk |
| 19 | 86985027 | 1 | COVER |
| 20 | 864-5010 | 4 | SCREW, Hex Soc Hd, M5 x 10, 8.8 |
| 21 | 444196A2 | 1 | GASKET |
| 22 | 864-10055 | 4 | SCREW, Hex Soc Hd, M10 x 55, 8.8, M10 x 55 mm |
06-24 VALVE ASSEMBLY – TRANSMISSION CONTROL (450728A2)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 221576A1 | 4 | PLUG, Hex Soc, M14 x 1.5, ORB, Incl. 3 |
| 3 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 8 | 252462A2 | 1 | NUT |
| 9 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk |
| 10 | 238-5015 | 1 | O-RING, -015, 70 Duro, .551″ ID x .070″ Thk |
| 11 | 256633A1 | 1 | O-RING, 12,9 ID x 1,24 mm |
| 12 | 238-7115 | 2 | O-RING, -115, Cl 7, .674″ ID x .103″ Thk |
| 13 | 87421157 | 3 | SOLENOID, Inc. 14 – 16 |
| 15 | 238-7016 | 1 | O-RING, -016, Cl 7, .614″ ID x .070″ Thk |
| 16 | 238-7015 | 1 | O-RING, -015, Cl 7, .551″ ID x .070″ Thk |
| 17 | 86985027 | 1 | COVER |
| 18 | 864-5010 | 4 | SCREW, Hex Soc Hd, M5 x 10, 8.8 |
| 19 | 444196A2 | 1 | GASKET |
| 20 | 864-10055 | 4 | SCREW, Hex Soc Hd, M10 x 55, 8.8, M10 x 55 mm |
06-25 PEDAL – INCHING
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 416255A3 | 1 | PEDAL ASSY., Inc. 2, 3 |
| 2 | 1990753C1 | 2 | PLASTIC RING |
| 3 | 1999382C1 | 1 | PAD, RUBBER |
| 4 | 800-3120 | 1 | CIRCLIP, M20 |
| 5 | 303754A1 | 1 | SPRING |
| 6 | 414144A1 | 1 | SWITCH |
| 7 | 87567150 | 1 | ROD |
| 8 | 302275A2 | 1 | LEVER |
| 9 | 301271A1 | 1 | SENSOR, Position |
| 10 | 895-11018 | 1 | WASHER, M18 x 34 x 3, 20 x 34 x 3 mm |
| 11 | 258242A1 | 1 | WASHER |
| 12 | 256833A1 | 2 | RETAINER |
| 13 | 295013A2 | 1 | PIN |
| 14 | 800-4311 | 1 | CIRCLIP, M11, 11 mm |
| 15 | 495-21044 | 1 | WASHER, 3/8″, 7/16 x 1 x 5/64 |
| 16 | 295012A2 | 1 | BUSHING |
| 17 | 3226538R1 | 1 | CLIP |
| 18 | 840-1550 | 4 | SCREW, Cross Pan Hd, M5 x 50 |
| 19 | 832-10405 | 4 | NUT, LOCK, M5 x .8, Cl 8 |
06-26 LEVER ASSEMBLY – TRANSMISSION CONTROL
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 325064A1 | 1 | HOUSING, Upper |
| 2 | 325065A1 | 1 | HOUSING, Lower |
| 3 | 325362A1 | 1 | CHASSIS |
| 4 | 325363A1 | 1 | LEVER, Transmission Control |
| 5 | 250939A1 | 1 | SPRING |
| 6 | 284777A1 | 1 | SWITCH, Universal W/ Dipping W/ Self-Cancel |
| 7 | 447256A2 | 1 | SWITCH, Transmission Control |
| 8 | 375681A1 | 1 | HARNESS, Transmission Control And Turn Signal Self-Cancelling Sensor (Sensor Not Serviced |
| 9 | 303465A2 | 1 | LAMP |
| 10 | 325533A1 | 1 | HANDLE |
| 11 | 325066A2 | 1 | GUARD |
| 12 | 303466A1 | 1 | SYMBOLS, RH |
| 13 | 303867A2 | 1 | TUBE, Left-Hand |
| 14 | 325068A1 | 1 | BELLOWS |
| 15 | 358353A1 | 1 | SYMBOLS |
| 16 | 840-1410 | 7 | SCREW, Cross Pan Hd, M4 x 10, 4.8 |
| 17 | 892-11004 | 7 | WASHER, LOCK, M4 |
| 18 | 905974R1 | 2 | SCREW, SELF TAPPING, Pan Hd, M2.9 x 13 |
06-27 REAR AXLE – HOUSING
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 410749A3 | 1 | HOUSING ASSY., Inc. 2 – 12 |
| 2 | 837-16035 | 1 | DOWEL, M16 x 35, 16 x 35 mm |
| 3 | 837-10020 | 2 | DOWEL, M10 x 20, M10 x 20 |
| 4 | 837-16040 | 4 | DOWEL, M16 x 40 |
| 5 | 37-11232 | 2 | DOWEL, 3/4″ x 2″, 3/4 x 2 |
| 8 | 192791A1 | 2 | PLUG, 1/2 in |
| 9 | 192792A1 | 1 | PLUG, 3/4 in |
| 10 | 411075A1 | 1 | FITTING |
| 11 | 238-6111 | 1 | O-RING, -111, 90 Duro, .424″ ID x .103″ Thk |
| 12 | 238-6112 | 1 | O-RING, -112, 90 Duro, .487″ ID x .103″ Thk |
| 13 | 409741A1 | 1 | TUBE ASSY. |
| 20 | 414416A3 | 1 | COVER |
| 21 | 413900A1 | 1 | GASKET |
| 22 | 828-12050 | 11 | BOLT, Hex, M12 x 50, 10.9 |
| 23 | 863-12150 | 4 | SCREW, Hex Soc Hd, M12 x 150, 12.9, M12 x 150; 12.9 |
| 24 | 414320A1 | 1 | FITTING |
| 25 | 87696450 | 1 | PLATE |
| 26 | 238-6139 | 2 | O-RING, -139, 90 Duro, 2.175″ ID x .103″ Thk |
| 27 | 628-10035 | 4 | BOLT, Hex, M10 x 35, 10.9, Full Thd |
| 28 | 220064A1 | 1 | PLUG, M14 x 1.5, ORB, Incl. 29 |
| 29 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 30 | 220066A1 | 1 | PLUG, M18 x 1.5, ORB, Incl. 31 |
| 31 | 637-63153 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 35 | 236602A1 | 1 | COVER, , Without Hitch |
| 36 | 379145A2 | 1 | GASKET |
| 37 | 628-20045 | 6 | BOLT, Hex, M20 x 45, 10.9, Full Thd |
| 38 | 628-12025 | 4 | BOLT, Hex, M12 x 25, 10.9, Full Thd, M12 x 25; 10.9 |
| 39 | 352787A2 | 1 | SENSOR, Axle speed, Transmission BSN AJB0372635 |
| 39 | 87548200 | 1 | SENSOR, PTO and Transmission Speed, Transmission ASN AJB0372635 |
| 40 | 238-5115 | 1 | O-RING, -115, 70 Duro, .674″ ID x .103″ Thk, 9/16 ID x 1/16 |
| 41 | 238-5111 | 1 | O-RING, -111, 70 Duro, .424″ ID x .103″ Thk |
| 42 | 239-5112 | 1 | O-RING, Rect, .5″ ID x .688″ OD, Cl 5 |
| 43 | 613-12025 | 2 | BOLT, Hex, M12 x 25, 8.8, Full Thd, M12 x 25; 8.8 |
| 44 | 892-11012 | 2 | WASHER, LOCK, M12 |
| 45 | 87631267 | 1 | HARNESS, WIRE, PTO Sensor, Transmission ASN AJB0372635 |
06-28 BREATHER – TRANSMISSION
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1971726C1 | 1 | BREATHER |
| 2 | 359116A1 | 1 | HOSE |
| 3 | 359117A1 | 1 | HOSE |
| 4 | 132093A2 | 1 | BLOCK |
| 5 | 220-502 | 1 | COUPLING, BREAK AWAY |
| 6 | 814-8050 | 1 | BOLT, Hex, M8 x 50, 8.8 |
| 7 | 895-15008 | 1 | WASHER, M8 x 20 x 1.6 |
| 8 | 369378A1 | 1 | TEE |
| 9 | 369941A1 | 1 | COUPLING |
| 10 | 217-15 | 2 | ELBOW, 45є, 1/8″-27 NPTF, Fem x 1/8″-27 NPTF Male |
| 11 | 217-120 | 2 | ELBOW, 1/4″ Hose x 1/8″ NPTF, Barbed |
| 12 | 413825A1 | 2 | HOSE |
| 13 | L11541 | 2 | STRAP, CABLE |
06-29 REAR AXLE – PLANETARY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1259670C2 | 2 | GEAR, RING |
| 2 | 1349345C1 | 2 | CARRIER |
| 3 | 1349350C2 | 6 | PINION |
| 4 | 1349346C2 | 6 | SHAFT |
| 5 | 1349347C1 | 348 | BEARING, NEEDLE |
| 6 | 1349348C1 | 6 | RING, THRUST |
| 7 | 1997886C1 | 12 | WASHER, THRUST |
| 8 | 838-3826 | 6 | PIN, M8 x 26, Coiled |
| 9 | 101-11350 | 2 | RING, SNAP, #350, Ext |
| 10 | 94651C2 | 1 | SHAFT, Left Hand |
| 11 | 94652C3 | 1 | SHAFT, Right Hand, Inc. 12 |
| 12 | 1981327C1 | 1 | PLUG |
| 13 | 1259732C1 | 2 | HUB |
| 14 | 101-11275 | 2 | RING, SNAP, #275, 2.594, Ext |
| 15 | 1259753C1 | 2 | WASHER |
06-31 REAR AXLE – 4 X 98 INCH, MX240 AND MX255
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1342268C1 | 2 | CARRIER, Inc. 2 – 4 |
| 2 | 837-16040 | 2 | DOWEL, M16 x 40 |
| 3 | 1975500C1 | 1 | BEARING, CUP |
| 4 | 619697C1 | 1 | BEARING, CUP |
| 5 | 828-16150 | 32 | BOLT, Hex, M16 x 150, 10.9 |
| 6 | 828-16170 | 4 | BOLT, Hex, M16 x 170, 10.9, M16 x 170; 10.9 |
| 7 | 118654A3 | 2 | AXLE, Inc. 8, 9 |
| 9 | 1981270C1 | 1 | INSERT |
| 10 | 238-5155 | 2 | O-RING, -155, 70 Duro, 3.987″ ID x .103″ Thk |
| 11 | 1975499C1 | 2 | BEARING, CONE |
| 12 | 1963841C1 | 2 | BEARING, CONE |
| 14 | 124744C1 | 2 | RING |
| 15 | 1277020C2 | 2 | RING |
| 16 | 1963839C1 | 2 | SEAL |
| 21 | 1349183C1 | 1 | SEAL, OIL, Oversize |
| 22 | 1349184C1 | 1 | SLEEVE |
| 23 | 896-12016 | 36 | WASHER, M17.5 x 30 x 4, HT |
06-32 REAR AXLE – 4 X 120 INCH
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1342268C1 | 2 | CARRIER, Inc. 2 – 4 |
| 2 | 837-16040 | 2 | DOWEL, M16 x 40 |
| 3 | 1975500C1 | 1 | BEARING, CUP |
| 4 | 619697C1 | 1 | BEARING, CUP |
| 5 | 828-16150 | 32 | BOLT, Hex, M16 x 150, 10.9 |
| 6 | 828-16170 | 4 | BOLT, Hex, M16 x 170, 10.9, M16 x 170; 10.9 |
| 7 | 1342484C4 | 2 | AXLE, REAR, Inc. 8, 9 |
| 9 | 1981270C1 | 1 | INSERT |
| 10 | 238-5155 | 2 | O-RING, -155, 70 Duro, 3.987″ ID x .103″ Thk |
| 11 | 1975499C1 | 2 | BEARING, CONE |
| 12 | 1963841C1 | 2 | BEARING, CONE |
| 14 | 124744C1 | 2 | RING |
| 15 | 1277020C2 | 2 | RING |
| 16 | 1963839C1 | 2 | SEAL |
| 17 | 800-51100 | 2 | RING, SNAP, M100, Ext, Hvy, Axle |
| 21 | 1349183C1 | 1 | SEAL, OIL, Oversize |
| 22 | 1349184C1 | 1 | SLEEVE |
| 23 | 896-12016 | 36 | WASHER, M17.5 x 30 x 4, HT |
06-33 TRANSMISSION – PUMP DRIVE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 389550A1 | 1 | HOUSING |
| 3 | 613-10035 | 8 | BOLT, Hex, M10 x 35, 8.8, Full Thd |
| 5 | 220199A1 | 1 | GEAR |
| 8 | 472163R1 | 2 | RING |
| 9 | 394326A1 | 2 | BEARING, BALL |
| 10 | 93316C1 | 1 | SPACER |
| 11 | 1286151C1 | 1 | SHAFT |
| 12 | 813-10130 | 1 | BOLT, Hex, M10 x 130, 8.8 |
| 13 | 896-12010 | 1 | WASHER, M10 x 21.5 x 2.5, HT, 11 x 21 x 2,5 mm |
| 14 | 404173A1 | 1 | GEAR, DRIVEN |
| 18 | 399933C91 | 2 | BEARING, CONE |
| 19 | 399934C1 | 2 | BEARING, CUP |
| 20 | 405664A2 | 1 | CAGE |
| 21 | 238-5257 | 1 | O-RING, -257, 70 Duro, 5.859″ ID x .139″ Thk |
| 23 | 613-10035 | 4 | BOLT, Hex, M10 x 35, 8.8, Full Thd |
| 30 | 220560A1 | 1 | PINION |
| 31 | 238-5223 | 1 | O-RING, -223, 70 Duro, 1.609″ ID x .139″ Thk |
| 32 | 1286023C1 | 1 | RING |
| 33 | 100-11237 | 1 | RING, SNAP, #237, Ext |
| 34 | ST269A | 1 | BEARING, BALL |
| 35 | 101-21433 | 1 | RING, SNAP, #433, 4.641″, Int |
06-34 POWER TAKE OFF ASSEMBLY – INPUT SHAFT
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 198496A1 | 1 | COUNTERSHAFT |
| 2 | 231241A1 | 1 | COUPLING, SPLINED |
| 3 | 238-6124 | 1 | O-RING, -124, 90 Duro, 1.237″ ID x .103″ Thk |
| 4 | 225800A2 | 1 | SHAFT, Inc. 5 |
| 5 | 38-3605 | 2 | PIN, 3/32″ x 5/16″, Coiled |
| 6 | 877-31212 | 1 | SET SCREW, Hex Soc, M12 x 12, Flat Pt, M12 x 12 |
| 7 | 225802A1 | 3 | SEAL |
| 8 | A54021 | 2 | WASHER, Thrust, 1-3/4 x 2-1/2 x 3/32 inch (44 x 64 x 2 mm) |
| 9 | A54022 | 1 | BEARING |
| 10 | 323734A1 | 1 | CARRIER, Inc. 11, 12 |
| 11 | R21491 | 1 | BEARING, NEEDLE |
| 12 | 38834 | 1 | BEARING, ROLLER |
| 15 | 126-124 | 1 | KEY, WOODRUFF, #15, 1/4″ x 1″, HT |
| 16 | 221203A1 | 1 | PINION, Gear 57T |
| 17 | 101-11475 | 1 | RING, SNAP, #475, 4.495, Ext, No. 475 |
| 18 | 1327732C1 | 2 | WASHER, 1-13/32 x 2 x 3/32 inch |
| 19 | 607146R91 | 1 | BEARING |
| 20 | 1259828C1 | 1 | RING |
| 21 | 1286083C1 | 1 | O-RING |
| 22 | 1286079C1 | 1 | RING |
| 23 | 230166A1 | 1 | PISTON |
| 24 | 1286081C1 | 1 | O-RING |
| 25 | 1286077C1 | 1 | RING |
| 28 | 1286026C1 | 3 | RING |
| 29 | 254105A1 | 1 | CAGE |
| 30 | 628-10030 | 4 | BOLT, Hex, M10 x 30, 10.9, Full Thd |
| 31 | 413665A1 | 2 | TUBE |
| 32 | 238-5013 | 4 | O-RING, -013, 70 Duro, .426″ ID x .070″ Thk |
| 33 | 630694C1 | 1 | BEARING, CONE |
| 34 | 630695C1 | 1 | BEARING, CUP |
| 35 | 225805A1 | 1 | BEARING, ROLLER |
| 40 | 249528A1 | 1 | SHIM, 0.203mm Thk |
| 40 | 199929A1 | 1 | SHIM, 0.356mm Thk |
| 40 | 199928A1 | 1 | SHIM, 0.508mm Thk |
| 40 | 199927A1 | 1 | SHIM, 0.559mm Thk |
| 40 | 222675A1 | 1 | SHIM, 0.635mm Thk |
| 41 | 199923A1 | 1 | SPACER |
| 42 | 357194R1 | 1 | RING |
| 43 | 325666A1 | 1 | BRAKE DISC |
| 44 | 239718A2 | 2 | PLATE |
| 45 | 87738316 | 10 | DISC, Separator |
| 46 | 1997907C1 | 10 | PLATE, Friction |
| 47 | 225801A1 | 9 | WASHER, SPECIAL |
| 48 | 1285996C1 | 1 | RING, SNAP |
| 49 | 221209A1 | 1 | HOUSING, CLUTCH |
| 50 | 1286052C1 | 1 | RING |
| 51 | 555570R1 | 1 | RING, SNAP |
06-35 POWER TAKE OFF ASSEMBLY – REDUCTION GEAR, DUAL SPEED
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 225806A1 | 1 | CAGE |
| 2 | 628-10030 | 6 | BOLT, Hex, M10 x 30, 10.9, Full Thd |
| 3 | 277389A2 | 1 | HUB ASSY., Inc. 4 |
| 4 | R21491 | 1 | BEARING, NEEDLE |
| 5 | 435536A1 | 1 | BEARING, CONE |
| 6 | 435535A1 | 2 | BEARING, CUP |
| 7 | 235545A1 | 1 | BEARING, CONE |
| 8 | 373471A1 | 1 | SHIM, 0.152mm Thk |
| 8 | 373474A1 | 1 | SHIM, 0.178mm Thk |
| 8 | 249529A1 | 1 | SHIM, 0.203mm Thk |
| 8 | 231773A1 | 1 | SHIM, 0.356mm Thk |
| 8 | 231778A1 | 1 | SHIM, 0.635mm Thk |
| 9 | 231772A1 | 1 | SPACER |
| 10 | 231760A1 | 1 | RING, SNAP |
| 13 | 226950A4 | 1 | GEAR, RING |
| 14 | 628-10030 | 6 | BOLT, Hex, M10 x 30, 10.9, Full Thd |
| 15 | 198709A1 | 1 | PROTECTION PLATE |
| 16 | 225810A1 | 1 | COVER |
| 17 | 139327C1 | 4 | CLIP |
| 20 | 226037A4 | 1 | COVER |
| 21 | 828-12045 | 4 | BOLT, Hex, M12 x 45, 10.9, Full Thd |
| 22 | 226035A1 | 2 | WASHER |
| 23 | 226033A3 | 1 | PINION |
| 24 | 300084A1 | 1 | SPACER |
| 25 | 138763C91 | 2 | BEARING, NEEDLE |
| 26 | 226034A2 | 1 | SHAFT |
| 27 | 38-21240 | 1 | PIN, 3/16″ x 2 1/2″, Coiled, 3/16″ x 2 1/2″, Coiled |
| 30 | 324000A1 | 1 | SHAFT, GEAR |
| 31 | A67328 | 1 | BEARING, ROLLER |
| 32 | A67327 | 1 | NEEDLE ROLLER |
| 33 | 226024A3 | 1 | WASHER, THRUST |
| 34 | 326733A1 | 1 | PINION |
| 35 | 318641A1 | 1 | BEARING, NEEDLE |
| 36 | 226028A2 | 1 | PISTON |
| 37 | 226029A1 | 1 | RING |
| 38 | 38-32044 | 1 | PIN, 5/16″ x 2 3/4″, Coiled, 5/16″ x 2 3/4″, Coiled |
| 39 | 226031A2 | 1 | COLLAR |
| 40 | 330162A1 | 2 | BEARING, NEEDLE |
| 41 | 326731A1 | 1 | GEAR |
| 45 | 323066A1 | 1 | SPRING |
| 46 | 295066A1 | 1 | WASHER |
| 47 | 100-21112 | 1 | RING, SNAP, 1.125″, Int, #112 |
| 48 | 327172A1 | 1 | SPACER |
| 49 | 243544A1 | 1 | BEARING, NEEDLE |
| 50 | 327372A1 | 1 | WASHER |
| 55 | 87656553 | 1 | HOUSING, BEARING |
| 56 | 828-12080 | 6 | BOLT, Hex, M12 x 80, 10.9 |
| 57 | 828-12045 | 2 | BOLT, Hex, M12 x 45, 10.9, Full Thd |
| 58 | 249530A1 | 1 | SHIM, 0,203 mm |
| 58 | 241383A1 | 1 | SHIM, 0,356 mm |
| 58 | 241380A1 | 1 | SHIM, 0,508 mm |
| 58 | 241381A1 | 1 | SHIM, 0,559 mm |
| 58 | 241382A1 | 1 | SHIM, 0,635 mm |
| 59 | 638-54145 | 1 | O-RING, Cl 5, 145MM ID x 3.55 Thk, 145 ID x 3,55 mm |
| 60 | 293053A1 | 1 | SEAL, OIL |
| 61 | A186004 | 1 | SENSOR |
| 61 | 87548197 | 1 | SENSOR, Dual Speed PTO, Replaces A186004, Also Order 87651813 For Initial Replacement |
| 62 | 238-5115 | 1 | O-RING, -115, 70 Duro, .674″ ID x .103″ Thk |
| 63 | 102-22318 | 1 | RING, SNAP, #318, 3.311, Int, Spiral, No. 318 |
06-36 POWER TAKE OFF ASSEMBLY – OUTPUT SHAFT, DUAL SPEED
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 226045A2 | 1 | SHAFT, DRIVE, RPM 540, 35 mm (1-3/8 in) |
| 2 | 226042A2 | 1 | SHAFT, DRIVE, RPM 1000, 35 mm (1-3/8 in) |
| 3 | 341418A2 | 1 | SEAL |
| 4 | 241387A5 | 1 | HOUSING, Inc. 7 |
| 5 | 614-10040 | 4 | BOLT, Hex, M10 x 40, 8.8, Full Thd, M10 x 40 |
| 6 | 87495161 | 1 | BOX |
| 7 | 375374R1 | 1 | RING |
| 10 | 226040A2 | 1 | SHAFT, DRIVE, RPM 1000, 45 mm (1-3/4 in) |
| 11 | 341418A2 | 1 | SEAL |
| 12 | 241385A3 | 1 | GEAR, Inner |
| 13 | 87656168 | 1 | PLATE, Outer |
| 14 | 628-10020 | 3 | BOLT, Hex, M10 x 20, 10.9, Full Thd |
| 20 | A151928 | 1 | SHAFT, DRIVE, RPM 1000 |
| 21 | 413-844 | 2 | BOLT, Hex, 1/2″-13 x 2 3/4″, G5 |
| 22 | 131-510 | 2 | NUT, LOCK, 1/2″-13 |
| 23 | A30061 | 2 | WASHER |
06-37 POWER TAKE OFF ASSEMBLY – OUTPUT SHAFT, SINGLE SPEED
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 225806A1 | 1 | CAGE |
| 2 | 628-10030 | 6 | BOLT, Hex, M10 x 30, 10.9, Full Thd |
| 3 | 277389A2 | 1 | HUB ASSY. |
| 4 | 435536A1 | 1 | BEARING, CONE |
| 5 | 435535A1 | 2 | BEARING, CUP |
| 6 | 235545A1 | 1 | BEARING, CONE |
| 10 | 373471A1 | 1 | SHIM, 0.152mm Thk |
| 10 | 373474A1 | 1 | SHIM, 0.178mm Thk |
| 10 | 249529A1 | 1 | SHIM, 0.203mm Thk |
| 10 | 231773A1 | 1 | SHIM, 0.356mm Thk |
| 10 | 231777A1 | 1 | SHIM, 0,559 mm |
| 10 | 231778A1 | 1 | SHIM, 0.635mm Thk |
| 11 | 231772A1 | 1 | SPACER |
| 12 | 231760A1 | 1 | RING, SNAP |
| 13 | 226950A4 | 1 | GEAR, RING |
| 14 | 628-10030 | 6 | BOLT, Hex, M10 x 30, 10.9, Full Thd |
| 15 | 198709A1 | 1 | PROTECTION PLATE |
| 16 | 225810A1 | 1 | COVER |
| 17 | 139327C1 | 4 | CLIP |
| 20 | 225812A1 | 1 | SHAFT, 45 mm (1-3/4 in) |
| 21 | 243946A4 | 1 | COVER |
| 22 | 435536A1 | 2 | BEARING, CONE |
| 23 | 435535A1 | 2 | BEARING, CUP |
| 26 | 380164A1 | 1 | SHIM, 0,152 mm |
| 26 | 380165A1 | 1 | SHIM, 0,178 mm |
| 26 | 249532A4 | 1 | SHIM, 0,203 mm |
| 26 | 243949A4 | 1 | SHIM, 0,356 mm |
| 26 | 243952A4 | 1 | SHIM, 0,635 mm |
| 27 | 305751A1 | 1 | PLATE |
| 28 | 896-12012 | 6 | WASHER, M12 x 24.5 x 3, HT |
| 29 | 627-12080 | 6 | BOLT, Hex, M12 x 80, 10.9, Full Thd, M12 x 80; 10.9 |
| 30 | 225820A1 | 1 | SEAL, OIL |
| 31 | 228256A1 | 1 | GASKET |
| 32 | 828-12045 | 8 | BOLT, Hex, M12 x 45, 10.9, Full Thd |
06-38 POWER TAKE OFF ASSEMBLY – SHIELDS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 379252A2 | 1 | SHIELD |
| 2 | 179657A2 | 1 | SPRING |
| 3 | 495-21069 | 4 | WASHER, 5/8″, 11/16 x 1-3/4 x 9/64 |
| 4 | 225672A2 | 1 | ROD |
| 5 | 733-5040 | 2 | PIN, SPLIT (COTTER), M5 x 40 |
06-39 SOLID STEEL REAR WHEELS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 193300A2 | 2 | WHEEL, WH23Ax38, For Tires 710/70R38 |
| 1 | 336726A1 | 2 | RIM, MW23Ax38, For Tires 710/70R38 |
| 1 | 193857A1 | 2 | WHEEL, W18Ax42, For Tires 20.8R42, 520/85R42 |
06-40 HUB ASSEMBLY – REAR WHEEL
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 827-22080 | 20 | BOLT, Hex, M22 x 80, 10.9, Full Thd |
| 3 | 496-31094 | 20 | WASHER, 15/16″ x 1 3/4″ x .219″, HDN |
| 6 | 405812A1 | 2 | HUB |
| 7 | 405815A1 | 2 | BUSHING, 102 mm (4 in) |
| 8 | 228273A1 | 12 | SCREW, Hex, M20 x 110, 10.9 |
| 9 | 396-31081 | 12 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN |
| 10 | A63219 | 2 | KEY, 3/4 x 6 |
| 11 | 38-11608 | 2 | PIN, LOCK, 1/4″ x 1/2″, Slotted |
| 12 | 303401A1 | 6 | PLUG |
06-41 SPACER – DUAL REAR WHEELS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 405822A1 | 2 | SPACER, 127 mm (5 in) |
| 2 | 827-22160 | 20 | BOLT, Hex, M22 x 160, 10.9 |
| 3 | 496-31094 | 20 | WASHER, 15/16″ x 1 3/4″ x .219″, HDN |
| 5 | 405823A1 | 2 | SPACER, 254 mm (10 in) |
| 6 | 827-22130 | 20 | BOLT, Hex, M22 x 130, 10.9 |
| 7 | 496-31094 | 20 | WASHER, 15/16″ x 1 3/4″ x .219″, HDN |
| 9 | 405824A1 | 2 | SPACER, 330 mm (13 in) |
| 10 | 827-22130 | 20 | BOLT, Hex, M22 x 130, 10.9 |
| 11 | 496-31094 | 20 | WASHER, 15/16″ x 1 3/4″ x .219″, HDN |
| 13 | 405825A1 | 2 | SPACER, 381 mm (15 in) |
| 14 | 827-22130 | 20 | BOLT, Hex, M22 x 130, 10.9 |
| 15 | 496-31094 | 20 | WASHER, 15/16″ x 1 3/4″ x .219″, HDN |
| 18 | 827-22120 | 20 | BOLT, Hex, M22 x 120, 10.9 |
| 19 | 496-31094 | 20 | WASHER, 15/16″ x 1 3/4″ x .219″, HDN |
06-42 REAR WHEEL WEIGHTS
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 405828A1 | 2 | WEIGHT |
| 2 | 857-16110 | 6 | BOLT, Hex Flg, M16 x 110, 10.9, Full Thd, M16 x 110; 10.9 |
| 3 | 832-44416 | 6 | NUT, LOCK, M16 x 2, Flg, Cl 10, M16; 10 |
| 6 | 405829A1 | 2 | WEIGHT |
| 7 | 857-16180 | 6 | BOLT, Hex Flg, M16 x 180, 8.8, M16 x 180; 10.9 |
| 8 | 832-44416 | 6 | NUT, LOCK, M16 x 2, Flg, Cl 10, M16; 10 |
| 11 | 405830A1 | 2 | WEIGHT |
| 12 | 857-16110 | 6 | BOLT, Hex Flg, M16 x 110, 10.9, Full Thd, M16 x 110; 10.9 |
| 13 | 832-44416 | 6 | NUT, LOCK, M16 x 2, Flg, Cl 10, M16; 10 |
| 16 | 413-1088 | 6 | BOLT, Hex, 5/8″-11 x 5 1/2″, G5, 5/8 x 5-1/2 |
| 16 | 413-10136 | 6 | BOLT, Hex, 5/8″-11 x 8 1/2″, G5, 5/8 x 8-1/2 |
| 17 | 425-2810 | 6 | NUT, Flg, 5/8″-11, G5, 5/8 |
| 18 | 496-21066 | 12 | WASHER, 21/32″ x 1 5/16″ x .150″ |
07-01 BRAKES – PEDAL BRAKE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 400859A3 | 1 | PEDAL ASSY., Left Hand, Inc. 2 – 7 |
| 2 | 1990753C1 | 2 | PLASTIC RING |
| 3 | 188419A1 | 1 | ARM |
| 4 | 906045R1 | 2 | WASHER, SPRING, M10.2 ID x 20.5 OD x .8 Thk, 10,2 x 20 x 0,8 mm |
| 5 | 87584294 | 1 | PIN |
| 6 | 1999381C1 | 1 | PAD, RUBBER |
| 7 | 298715A1 | 1 | BUSHING |
| 10 | 400862A3 | 1 | PEDAL ASSY., Right Hand, Inc. 11 – 13 |
| 11 | 1990753C1 | 2 | PLASTIC RING |
| 12 | 1999382C1 | 1 | PAD, RUBBER |
| 13 | 298715A1 | 1 | BUSHING |
| 15 | 800-3120 | 1 | CIRCLIP, M20 |
| 17 | 614-8025 | 2 | BOLT, Hex, M8 x 25, 8.8 |
| 18 | 829-1408 | 2 | NUT, M8, Cl 10 |
| 19 | 236504A3 | 2 | SPRING |
| 20 | 279265A2 | 2 | SWITCH, Plunger N/C Brake |
| 22 | 400865A1 | 2 | ROD |
| 24 | 236323A1 | 2 | CLEVIS |
| 25 | 192869A1 | 2 | PIN, CLEVIS |
| 26 | 193182A1 | 2 | CLIP |
| 28 | 829-1410 | 2 | NUT, M10, Cl 10 |
| 30 | 258242A1 | 1 | WASHER |
| 33 | 397101A7 | 1 | VALVE, Brake, See Figure 07-03 |
| 34 | 407142A1 | 1 | GASKET |
| 35 | 806-10030 | 3 | BOLT, Hex, Lock, M10 x 30, Cl 10.9, M10 x 30; 10.9 |
| 36 | 895-18010 | 3 | WASHER, M10 x 18 x 1.6 |
07-02 BRAKES – HYDRAULIC SYSTEM
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 397101A7 | 1 | VALVE, Brake, See Figure 07-03 |
| 2 | 700-106 | 2 | CONNECTOR, HYD., 11/16″-16 ORFS x M18 x 1.5 ORB, Inc. 3, 4 |
| 3 | 637-63153 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 4 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 5 | 87404717 | 1 | HOSE ASSY., Supply |
| 6 | 238-6012 | 4 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 7 | 400692A1 | 1 | HOSE, Return |
| 8 | 700-345 | 1 | ELBOW, 90є, 11/16″-18 ORFS x M18 x 1.5 ORB, 11/16 fc sl x 18 Or, Inc. 9, 10 |
| 9 | 637-63153 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 10 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 11 | 1546024C1 | 5 | CLAMP |
| 12 | 829-1408 | 5 | NUT, M8, Cl 10 |
| 13 | 384870A1 | 5 | PLATE |
| 14 | 436382A1 | 1 | TUBE ASSY., Right Hand Brake |
| 15 | 436383A1 | 1 | TUBE ASSY., Left Hand Brake |
| 16 | 433588A1 | 1 | TUBE ASSY., Supply |
| 17 | 700-102 | 1 | CONNECTOR, HYD., 13/16″-16 ORFS x M18 x 1.5 ORB, Incl. 18 – 20 |
| 18 | 637-63153 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 19 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 20 | 326965A1 | 1 | SCREEN |
| 21 | 387024A1 | 1 | TUBE ASSY., Return |
| 22 | 201-304 | 1 | ELBOW, 90є, 11/16″-16 x 9/16″-18 Adj, ORFS, Inc. 23, 24 |
| 23 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 24 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 25 | 86985588 | 2 | HOSE, FLEXIBLE |
| 26 | 700-102 | 2 | CONNECTOR, HYD., 13/16″-16 ORFS x M18 x 1.5 ORB, Incl. 27, 28 |
| 27 | 637-63153 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 28 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
07-03 BRAKES – CONTROL VALVE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 433199A1 | 2 | POPPET |
| 3 | 397105A4 | 2 | SLEEVE |
| 4 | 397106A4 | 2 | SPOOL |
| 5 | A63399 | 2 | SEAL |
| 6 | 279266A1 | 2 | SWITCH, Inc. 7 |
| 7 | 237-6003 | 1 | O-RING, 3-1, .301″ ID x .064″ Thk |
| 8 | 407387A1 | 2 | SEALRING |
| 9 | 87016962 | 2 | O-RING, -131, Cl 7, 1.674″ ID x .103″ Thk, 1-11/16 ID x 3/32 |
| 10 | 407282A1 | 2 | RING, SNAP |
| 11 | 397110A1 | 2 | SPRING, COMPRESSION |
| 12 | 433196A2 | 2 | SPRING |
| 13 | 304018A1 | 1 | POPPET, VALVE, Inc. 14 ,15 |
| 14 | 637-63153 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 15 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 16 | 403356A1 | 1 | GASKET |
| 17 | 397111A1 | 1 | PLATE |
| 18 | 220056A1 | 3 | SCREW, Hex Soc Flat Hd, M10 x 20, 8.8 |
07-04 BRAKES – DIFFERENTIAL
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 1342723C2 | 2 | COVER |
| 2 | 813-16110 | 6 | BOLT, Hex, M16 x 110, 8.8, M16 x 110, 8.8, Right Hand |
| 2 | 814-16100 | 6 | BOLT, Hex, M16 x 100, 8.8, (LH) |
| 8 | 1997422C1 | 2 | PISTON |
| 10 | 120486C1 | 8 | PLATE, BRAKE |
| 11 | 120488C2 | 8 | PLATE, BRAKE |
| 12 | 1981187C1 | 2 | PLATE |
| 19 | 37-1828 | 1 | DOWEL, 1/2″ x 1 3/4″, 1/2 x 1-3/4 |
| 20 | 100-1450 | 2 | RING, SNAP, #50, Ext |
| 21 | 1342928C1 | 12 | WASHER |
| 25 | 120514C2 | 4 | TUBE |
| 26 | 238-5013 | 8 | O-RING, -013, 70 Duro, .426″ ID x .070″ Thk |
07-05 PARK BRAKE – HYDRAULIC SYSTEM
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 436285A1 | 1 | COVER, , See Figure 07-06 |
| 2 | 700-443 | 1 | TEE, 13/16″-16 ORFS x M14 x 1.5 ORB Br, 13/16 fc sl x 14 Or, Inc. 3, 4 |
| 3 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 4 | 238-6014 | 2 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 5 | 433595A3 | 1 | TUBE ASSY. |
| 6 | 700-402 | 1 | TEE, 13/16″-16 ORFS x M18 x 1.5 ORB Br, 13/16 fc sl x 18 Or, Inc. 7, 8 |
| 7 | 637-63153 | 1 | O-RING, Cl 6, 15.3MM ID x 2.2 Thk |
| 8 | 238-6014 | 2 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 10 | 448220A1 | 1 | TUBE ASSY. |
| 11 | 700-326 | 1 | ELBOW, 90є, 13/16″-18 ORFS x M22 x 1.5 ORB, Incl. 12, 13 |
| 12 | 637-63193 | 1 | O-RING, Cl 6, 19.3MM ID x 2.2 Thk |
| 13 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 14 | 445535A2 | 1 | PLATE ASSY., , See Figure 06-04 |
| 15 | 322529A1 | 1 | COUPLING |
| 16 | 143349A1 | 1 | DUST CAP |
| 17 | 87521424 | 1 | SENDER, TEMPERATURE, Transmission, Inc. 18 |
| 18 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
07-06 PARK BRAKE – BRAKE ASSEMBLY
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 2 | 199320A1 | 1 | SHAFT |
| 3 | 813-10050 | 6 | BOLT, Hex, M10 x 50, 8.8, M10 x 50; 8 |
| 4 | 218-5351 | 1 | CONNECTOR, HYD., 3/4″-16, 37є x 9/16″-18, O-Ring, 3/4 fl x 9/16 Or, Inc. 5 |
| 6 | 124306A1 | 1 | PIPE |
| 10 | 1997881C1 | 1 | SHIELD |
| 11 | 806-8016 | 3 | BOLT, Hex, Lock, M8 x 16, Cl 10.9, M8 x 16; 10.9 |
| 12 | 630694C1 | 2 | BEARING, CONE |
| 13 | 630695C1 | 2 | BEARING, CUP |
| 14 | 222856A1 | 1 | PINION |
| 15 | 101-21412 | 2 | RING, SNAP, #412, 4.430″, Int |
| 17 | 1277309C1 | 1 | WASHER |
| 18 | 1997891C1 | 1 | RING, SNAP |
| 19 | 117853A1 | 1 | HOUSING |
| 20 | 198853A1 | 1 | SEALRING |
| 23 | 238-5014 | 1 | O-RING, -014, 70 Duro, .489″ ID x .070″ Thk |
| 24 | 436285A1 | 1 | COVER, Inc. 25 – 28 |
| 25 | 511-1070 | 1 | BALL, 7mm Dia, 7 mm |
| 26 | 221576A1 | 1 | PLUG, Hex Soc, M14 x 1.5, ORB, Incl. 27 |
| 27 | 637-63113 | 1 | O-RING, Cl 6, 11.3MM ID x 2.2 Thk |
| 28 | 255404A3 | 1 | SPRING |
| 29 | 628-10030 | 4 | BOLT, Hex, M10 x 30, 10.9, Full Thd |
| 30 | 828-10070 | 2 | BOLT, Hex, M10 x 70, 10.9 |
| 31 | 896-12016 | 2 | WASHER, M17.5 x 30 x 4, HT |
| 32 | 198336A1 | 2 | SCREW |
| 33 | 238-5114 | 2 | O-RING, -114, 70 Duro, .612″ ID x .103″ Thk |
| 40 | 195066A3 | 1 | CARRIER |
| 41 | 198502A1 | 2 | SNAP RING |
| 42 | 195068A2 | 1 | PLATE |
| 43 | 118421A1 | 5 | BRAKE DISC |
| 44 | 195067A2 | 5 | PLATE |
| 45 | 195069A2 | 1 | PISTON |
| 46 | 238-7169 | 1 | O-RING, -169, Cl 7, 7.487″ ID x .103″ Thk |
| 47 | 198684A1 | 1 | SEALRING |
| 48 | 238-7175 | 1 | O-RING, -175, Cl 7, 8.897″ ID x .109″ Thk, 9 ID x 3/32 |
| 49 | 198685A1 | 1 | SEALRING |
| 50 | 195118A1 | 6 | WASHER |
| 51 | 284935A1 | 1 | PLATE, BACKING |
| 52 | 198501A1 | 1 | SNAP RING |
| 57 | 296268A1 | 1 | GUARD |
| 58 | 806-6010 | 4 | BOLT, Hex, Lock, M6 x 10, Cl 10.9, M6 x 10; 10.9 |
| 59 | 782-84413 | 3 | SCREW, SELF TAPPING, Hex Wash Hd, M4.8 x 13, M4,8 X 13 |
| 5 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
07-07 PARK BRAKE – RELEASE
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 283465A1 | 1 | PLATE |
| 2 | 248-2164 | 1 | GROMMET, 1/4″ ID x 7/16″ Groove Dia |
| 3 | 282625A1 | 1 | ROD |
| 4 | 279765A3 | 1 | PISTON |
| 5 | 282624A1 | 1 | SUPPORT |
| 6 | 627-8020 | 4 | BOLT, Hex, M8 x 20, 10.9 |
| 7 | 282456A1 | 1 | SPRING |
| 8 | 432-48 | 1 | PIN, SPLIT (COTTER), 1/16″ x 1/2″ |
| 9 | 279763A2 | 1 | BRAKE LEVER |
| 10 | 182220A1 | 1 | GROMMET |
| 11 | 614-8016 | 2 | BOLT, Hex, M8 x 16, 8.8 |
| 12 | 516-22127 | 2 | CLAMP, J, 9/16″ Insul, 5/16″ Bolt, 1/2 ID |
| 13 | 638-53160 | 1 | O-RING, Cl 5, 16MM ID x 2.65 Thk, 16 ID x 2,65 |
| 15 | 136-159 | 1 | PIN, SPLIT (COTTER), Int, 3/16 x .080″ |
| 16 | 169850C2 | 2 | CLIP, CABLE |