CASE 2366 IH Axial – Flow Combine
CASE 2366 IH Axial – Flow Combine — parts list, part 3 of 8
Assemblies on this page: Parts list … Parts list.
Parts list
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 1 | 87419387 | 1 | MOTOR, STARTER, Iskra Brand, See Figure 04-39B |
| 2 | 87422566 | 1 | COVER, Jump Start Protection |
| 3 | 87422567 | 1 | NUT |
| 4 | 868-12035 | 3 | SCREW, 12 Pt Hd, M12 x 35, 12.9, M12 x 35; 10.9 |
| 5 | 896-11012 | 3 | WASHER, M13.5 x 24.5 x 3, HT |
| 6 | 829-4410 | 1 | NUT, Thin, M10 x 1.5, Cl 05 |
| 7 | 892-11010 | 1 | WASHER, LOCK, M10 |
| 8 | 825-2405 | 1 | NUT, M5 x .8, Flg, Cl 8, M5; 8 |
| 1 | 87452304 | 1 | BRACKET, Drive End |
| 2 | 87452305 | 1 | SOLENOID |
| 3 | 87452306 | 1 | DRIVE ASSY. |
| 4 | 87452307 | 1 | LEVER, Engaging |
| 5 | 87452308 | 1 | GEAR, Reduction |
| 6 | 87452309 | 1 | ARMATURE |
| 7 | 87452310 | 1 | KIT |
| 8 | 87452311 | 1 | KIT, STARTER MTR REPAIR, SET Fixing Parts |
| 9 | 87452312 | 1 | STATOR |
| 10 | 87452313 | 1 | BRUSH HOLDER |
| 11 | 87452314 | 1 | BRUSH, SET Spring |
| 12 | 87452315 | 1 | BRACKET, Commutator End |
| 3 | 108641C1 | 1 | GLAND |
| 4 | 238-6326 | 1 | O-RING, -326, 90 Duro, 1.60″ ID x .210″ Thk |
| 5 | 381293R1 | 1 | WASHER |
| 6 | 108639C1 | 1 | ROD, PISTON |
| 7 | 231-41310 | 1 | NUT, LOCK, 5/8″-11, GB, 5/8 |
| 8 | 532773R1 | 1 | WIPER |
| 9 | 119185C1 | 1 | SEAL |
| 10 | 140600C1 | 1 | WIRE, RETAINING |
| 11 | 108640C2 | 1 | PISTON |
| 12 | 238-6326 | 1 | O-RING, -326, 90 Duro, 1.60″ ID x .210″ Thk |
| 13 | 381850R2 | 2 | BACK-UP RING |
| 1 | 191529C91 | 1 | LEVER ASSY., Inc. 2 |
| 2 | 556448R1 | 2 | BUSHING |
| 3 | 495-11081 | 9 | WASHER, 3/4″, SAE |
| 4 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 5 | 174520C2 | 1 | ROD |
| 6 | 425-108 | 2 | NUT, 1/2″-13, G5 |
| 7 | 432-1216 | 1 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 8 | 495-11053 | 3 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 9 | 495-81287 | 1 | WASHER, 17/32″ x 1 1/4″ x .120″, 17/32 x 1-1/4 x 1/8 |
| 10 | 191777C2 | 1 | SUPPORT |
| 13 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 |
| 15 | 194652C1 | 1 | PIVOT |
| 16 | 155311C1 | 1 | SPRING |
| 17 | 663887R91 | 1 | PULLEY, Fan Jackshaft Idler, 8 OD |
| 18 | 425-1410 | 1 | NUT, Jam, 5/8″-11, G5, 5/8 |
| 19 | 413-1048 | 1 | BOLT, Hex, 5/8″-11 x 3″, G5, 5/8 x 3 |
| 20 | 492-11062 | 1 | WASHER, LOCK, 5/8″ |
| 21 | 495-11066 | 2 | WASHER, 5/8″, SAE, 21/32 x 1-5/16 x 3/32 |
| 22 | 191305C1 | 1 | V-BELT, Fan Jackshaft, 112 in ov cntr, See Figure Note, BSN JJC0184544 |
| 24 | 191603C2 | 1 | PULLEY, Feeder, 12 in OD |
| 25 | 183325C1 | 1 | PULLEY, Fan Jackshaft, 13 in OD, See Figure Note, BSN JJC0184544 |
| 26 | 193948C1 | 1 | PULLEY, Cleaning Unit, 9-3/4 in OD |
| 27 | 188298C2 | 1 | STUD |
| 28 | 425-1012 | 2 | NUT, 3/4″-10, G5 |
| 29 | 432-1620 | 1 | PIN, SPLIT (COTTER), 1/4″ x 1 1/4″, 1/4″ x 1 1/4″ |
| 30 | 492-11075 | 1 | WASHER, LOCK, 3/4″, 3/4″ |
| 31 | 192011C2 | 1 | SUPPORT, See Figure 09H-03, Use with 192623C3 |
| 34 | 413-640 | 3 | BOLT, Hex, 3/8″-16 x 2 1/2″, G5, 3/8 x 2-1/2 |
| 35 | 495-81129 | 6 | WASHER, 13/32″ x 3/4″ x .120″, 13/32 x 3/4 x 7/64 |
| 36 | 231-4116 | 3 | NUT, LOCK, 3/8″-16, GB, 3/8 |
| 14 | 477-73816 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 1 | 193447C91 | 1 | ARM, Inc. 2 |
| 2 | 556448R1 | 2 | BUSHING |
| 3 | 413-1048 | 1 | BOLT, Hex, 5/8″-11 x 3″, G5, 5/8 x 3 |
| 4 | 495-11066 | 1 | WASHER, 5/8″, SAE, 21/32 x 1-5/16 x 3/32 |
| 5 | 492-11062 | 1 | WASHER, LOCK, 5/8″ |
| 6 | 425-1010 | 1 | NUT, 5/8″-11, G5 |
| 7 | 495-11053 | 4 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 8 | 673214R91 | 1 | PULLEY, Elevator Drive, 186 mm (7-5/16 in.) |
| 9 | 191531C2 | 1 | ROD |
| 10 | 432-1216 | 1 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 11 | 1315483C1 | 1 | BRACKET |
| 12 | 413-516 | 3 | BOLT, Hex, 5/16″-18 x 1″, G5, Full Thd, 5/16 x 1 |
| 13 | 425-105 | 3 | NUT, 5/16″-18, G5 |
| 14 | 492-11031 | 3 | WASHER, LOCK, 5/16″ |
| 15 | 155311C1 | 1 | SPRING |
| 16 | 495-81162 | 1 | WASHER, 17/32″ x 1 1/2″ x .179″, 17/32 x 1-1/2 x 11/64 |
| 17 | 425-108 | 2 | NUT, 1/2″-13, G5 |
| 18 | 186588C3 | 1 | CHANNEL |
| 20 | 425-146 | 4 | NUT, Jam, 3/8″-16, G5 |
| 21 | 409-7616 | 1 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 22 | 231-5146 | 1 | NUT, Flg, USR, 3/8″-16 |
| 23 | 425-1012 | 2 | NUT, 3/4″-10, G5 |
| 24 | 493-41078 | 1 | WASHER, LOCK, Ext Tooth, 3/4″, 3/4 |
| 25 | 495-11081 | 1 | WASHER, 3/4″, SAE |
| 26 | 188298C2 | 1 | STUD |
| 28 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 29 | 182676C2 | 2 | SUPPORT |
| 30 | 432-1620 | 1 | PIN, SPLIT (COTTER), 1/4″ x 1 1/4″, 1/4″ x 1 1/4″ |
| 31 | 477-73820 | 1 | SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1 1/4″, 3/8 x 1-1/4 |
| 31 | 409-7612 | 1 | BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr |
| 32 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 |
| 34 | 183325C1 | 1 | PULLEY, Cleaning Unit, 13 in. OD, Inc. 35 |
| 35 | 104235 | 24 | RIVET, FH, 3/16″ x 1/2″ |
| 36 | 413-640 | 3 | BOLT, Hex, 3/8″-16 x 2 1/2″, G5, 3/8 x 2-1/2 |
| 37 | 495-81129 | 3 | WASHER, 13/32″ x 3/4″ x .120″, 13/32 x 3/4 x 7/64 |
| 38 | 492-11038 | 3 | WASHER, LOCK, 3/8″ |
| 39 | 231-4116 | 3 | NUT, LOCK, 3/8″-16, GB, 3/8 |
| 40 | 193948C1 | 1 | PULLEY, Cleaning Unit, 9-3/4 in. OD, Inc. 41 |
| 41 | 47-49 | 16 | RIVET, FH, 1/4″ x 9/16″, 1/4 x 9/16 |
| 42 | 413-620 | 3 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 43 | 492-11038 | 3 | WASHER, LOCK, 3/8″ |
| 44 | 495-81137 | 3 | WASHER, 13/32″ x 1″ x .224″, 13/32 x 1 x 15/64 |
| 45 | 195161C1 | 1 | PULLEY, Beater, 8-3/8 in. OD, Without Straw Chopper |
| 46 | 193682C1 | 1 | PULLEY, Shaker Shaft, 25 in OD, BSN JJC0252949 |
| 47 | 413-516 | 8 | BOLT, Hex, 5/16″-18 x 1″, G5, Full Thd, 5/16 x 1 |
| 48 | 492-11031 | 12 | WASHER, LOCK, 5/16″ |
| 49 | 425-105 | 4 | NUT, 5/16″-18, G5 |
| 50 | 495-11034 | 4 | WASHER, 5/16″, SAE, (11/32 x 11/16 x 1/16″) |
| 51 | 186509C2 | 1 | BELT, 255 in ov cntr, Without Straw Chopper |
| 52 | 181055C1 | 1 | BELT, 201 in ov cntr, With Straw Chopper |
| 53 | 188253C3 | 1 | SUPPORT |
| 54 | 409-7616 | 4 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 55 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 |
| 56 | 413-1040 | 1 | BOLT, Hex, 5/8″-11 x 2 1/2″, G5, 5/8 x 2-1/2 |
| 57 | 495-11066 | 5 | WASHER, 5/8″, SAE, 21/32 x 1-5/16 x 3/32 |
| 57 | 492-11062 | 1 | WASHER, LOCK, 5/8″ |
| 58 | 673214R91 | 1 | PULLEY, Fixed Idler, 186 mm (7-5/16 in.) |
| 59 | 425-1010 | 1 | NUT, 5/8″-11, G5 |
| 60 | 425-1410 | 1 | NUT, Jam, 5/8″-11, G5, 5/8 |
| 61 | 1302068C2 | 1 | GUIDE |
| 62 | 409-7620 | 2 | BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr |
| 63 | 495-81135 | 3 | WASHER, 13/32″ x 1″ x .120″, 13/32 x 1 x 1/8 |
| 65 | 495-81135 | 1 | WASHER, 13/32″ x 1″ x .120″, 13/32 x 1 x 7/64 |
| 66 | 231-5146 | 3 | NUT, Flg, USR, 3/8″-16 |
| 19 | 477-73816 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 64 | 477-73816 | 1 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 1 | 244420A1 | 1 | BELT, 85 in ov cntr, BSN JJC0254999 |
| 1 | 244420A3 | 1 | BELT, Seamless, ASN JJC0255000 |
| 2 | 1330054C1 | 1 | PULLEY, Rotor Drive Variable, 17-1/2 OD, Inc. 3 |
| 3 | 194665C1 | 3 | BUSHING |
| 4 | 219-86 | 1 | NIPPLE, LUBE, 1/8″ x .62″ lg, Drive |
| 5 | 238-5226 | 2 | O-RING, -226, 70 Duro, 1.984″ ID x .139″ Thk |
| 7 | 278927A1 | 2 | BEARING, THRUST |
| 8 | 194394C1 | 1 | HUB |
| 9 | 249397A1 | 1 | SUPPORT |
| 10 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 13 | 413-12144 | 1 | BOLT, Hex, 3/4″-10 x 9″, G5, 3/4 x 9, Replaces 413-12152 |
| 15 | 329-1412 | 1 | NUT, Jam, 3/4″-10, G8 |
| 16 | 194464C2 | 1 | SPROCKET, 25T |
| 17 | 191542C2 | 1 | COUPLING, SPLINED, , BSN JJC0254999 |
| 17 | 411042A1 | 1 | COUPLING, SPLINED, , ASN JJC0255000 |
| 19 | 413828A1 | 1 | SHAFT ASSY., Inc. 20 – 26 |
| 20 | 1300502C1 | 1 | KIT |
| 21 | 1300501C1 | 2 | U-BOLT |
| 22 | 425-116 | 4 | NUT, 3/8″-24, G5 |
| 23 | 492-11038 | 4 | WASHER, LOCK, 3/8″ |
| 30 | 426-720 | 4 | BOLT, Hex, 7/16″-14 x 1 1/4″, G8, 7/16 x 1-1/4; 8 |
| 31 | 492-11044 | 4 | WASHER, LOCK, 7/16″ |
| 32 | 188848C1 | 1 | PULLEY, 17-1/2 in OD |
| 33 | 188846C2 | 1 | HUB, Inc. 34, BSN JJC0254999 |
| 33 | 411046A1 | 1 | HUB, Inc. 34, ASN JJC0255000 |
| 34 | 191544C2 | 3 | PIN |
| 35 | 326-828 | 6 | BOLT, Hex, 1/2″-13 x 1 3/4″, G8 |
| 36 | 392-21050 | 6 | WASHER, LOCK, 1/2″, 1/2″ |
| 37 | 329-108 | 6 | NUT, 1/2″-13, G8 |
| 38 | D137626 | 2 | CLAMP, Bearing, ASN JJC0255000 |
| 39 | D137627 | 4 | BOLT, 5/16, ASN JJC0255000 |
| 12 | 477-73816 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 1 | 123837A2 | 1 | SUPPORT |
| 2 | 409-7816 | 2 | BOLT, Hex Flg, 1/2″-13 x 1″, Serr, 1/2 x 1 |
| 3 | 425-108 | 7 | NUT, 1/2″-13, G5 |
| 4 | 80679 | 19 | WASHER, LOCK, 1/2″ |
| 5 | 413-820 | 7 | BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 6 | 181165C1 | 1 | SUPPORT ASSY., Left Hand |
| 7 | 413-816 | 8 | BOLT, Hex, 1/2″-13 x 1″, G5, Full Thd |
| 8 | 181166C1 | 1 | SUPPORT, Right Hand |
| 9 | 495-81162 | 1 | WASHER, 17/32″ x 1 1/2″ x .179″, 17/32 x 1-1/2 x 11/64 |
| 10 | 181167C1 | 1 | SUPPORT, Manifold Bulkhead Fitting |
| 11 | 231-5148 | 6 | NUT, Flg, USR, 1/2″-13 |
| 12 | 160-108 | 1 | BOLT, Hex Flg, 1/2″-13 x 1 1/2″, G8, Full Thd, 1/2 x 1-1/2; 8 |
| 13 | 433-820 | 5 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5 |
| 14 | 495-81287 | 9 | WASHER, 17/32″ x 1 1/4″ x .120″, 17/32 x 1-1/4 x 7/64 |
| 15 | 181164C1 | 1 | SUPPORT |
| 16 | 181172C1 | 1 | SUPPORT, Rear |
| 17 | 181171C1 | 1 | ROD |
| 18 | 425-1110 | 2 | NUT, 5/8″-18, G5 |
| 19 | 495-81017 | 2 | WASHER, 17/32″ x 3/4″ x .120″, 17/32 x 3/4 x 1/8 |
| 20 | 434-824 | 2 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/2″, G5, Full Thd, 1/2 x 1-1/2 |
| 22 | 194901C1 | 1 | ROD |
| 23 | 434-612 | 2 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 24 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 25 | 1345342C1 | 2 | BAND |
| 1 | 430384A1 | 1 | SHIELD, Drive Pulley |
| 2 | 231-5146 | 9 | NUT, Flg, USR, 3/8″-16 |
| 4 | 492-11038 | 2 | WASHER, LOCK, 3/8″ |
| 5 | 495-81135 | 2 | WASHER, 13/32″ x 1″ x .120″, 13/32 x 1 x 1/8 |
| 6 | 413-616 | 2 | BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd |
| 7 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 8 | 191952C5 | 1 | GUARD, Driven Pulley |
| 10 | 477-73812 | 6 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 13 | 181168C1 | 1 | SUPPORT |
| 14 | 433-820 | 5 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5 |
| 15 | 80679 | 5 | WASHER, LOCK, 1/2″ |
| 16 | 425-108 | 5 | NUT, 1/2″-13, G5 |
| 17 | 181169C1 | 1 | SUPPORT ASSY. |
| 18 | 432-1216 | 1 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 19 | 495-11053 | 1 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 20 | 188440C1 | 1 | HOSE, 115 mm (4-5/8 in.), Cut From 526602R1 |
| 23 | 191961C2 | 1 | SUPPORT |
| 25 | 193686C1 | 1 | ANGLE |
| 26 | 293817A1 | 1 | GUIDE |
| 27 | 477-73112 | 2 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 28 | 425-285 | 2 | NUT, Flg, 5/16″-18, G5 |
| 3 | 477-73816 | 3 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 1 | 195457C93 | 1 | LEVER, Inc. 2 & 3 |
| 2 | 1302308C1 | 2 | BUSHING, 1 x 1-1/4 x 1-1/8 |
| 3 | 195459C2 | 1 | PIN, LARGE |
| 4 | 432-1224 | 2 | PIN, SPLIT (COTTER), 3/16″ x 1 1/2″ |
| 5 | 495-81073 | 7 | WASHER, 1 1/32″ x 1 3/4″ x .060″, 1-1/32 x 1-3/4 x 1/16 |
| 6 | 1315229C2 | 1 | PIN |
| 7 | 432-1216 | 1 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 8 | 495-81175 | 2 | WASHER, 21/32″ x 1″ x .120″, 21/32 x 1 x 1/8 |
| 9 | 174757C1 | 1 | PULLEY, Idler, 8 in OD |
| 10 | 559205R91 | 1 | BEARING |
| 13 | 193284C1 | 1 | ROD |
| 14 | 413-612 | 2 | BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 15 | 492-11038 | 2 | WASHER, LOCK, 3/8″ |
| 16 | 125380A1 | 2 | SUPPORT |
| 17 | 231-5146 | 6 | NUT, Flg, USR, 3/8″-16 |
| 18 | 409-7620 | 6 | BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr |
| 19 | 196676C1 | 1 | SPACER |
| 20 | 425-106 | 1 | NUT, 3/8″-16, G5 |
| 21 | 492-11038 | 1 | WASHER, LOCK, 3/8″ |
| 23 | 413-656 | 1 | BOLT, Hex, 3/8″-16 x 3 1/2″, G5, 3/8 x 3-1/2 |
| 24 | 186747C3 | 1 | PIVOT |
| 25 | 125381A1 | 1 | TUBE |
| 26 | 432-612 | 1 | PIN, SPLIT (COTTER), 3/32″ x 3/4″ |
| 27 | 427-6178 | 1 | PIN, CLEVIS, 3/8″ x 1.781″ |
| 29 | 1303058C1 | 1 | ROD |
| 30 | 425-1010 | 3 | NUT, 5/8″-11, G5 |
| 33 | 495-81030 | 1 | WASHER, 21/32″ x 2″ x .179″, 21/32 x 2 x 11/64 |
| 34 | 186748C1 | 1 | BRACKET |
| 35 | 186744C1 | 1 | TUBE |
| 36 | 186745C1 | 1 | SPRING |
| 37 | 186746C1 | 1 | TUBE |
| 38 | 191461C1 | 1 | PULLEY, Drive, 11 in OD, See Figure 06-01, BSN JJC0253999 |
| 38 | 389433A1 | 1 | PULLEY ASSY., Drive, 11 in OD, See Figure 06-02, ASN JJC0254000 |
| 39 | 191241C3 | 1 | BELT, 130 in ov cntr, Separator Drive |
| 40 | 191452C2 | 1 | PULLEY, Driven, 14-3/4 in OD |
| 43 | 186749C1 | 1 | BRACKET |
| 44 | 38-11612 | 1 | PIN, LOCK, 1/4″ x 3/4″, Slotted, 1/4″ x 3/4″, Slotted |
| 45 | 1979908C1 | 2 | CLIP |
| 46 | 477-73112 | 2 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 47 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 48 | 1979527C1 | 1 | WRENCH-HOOK |
| 49 | 477-73820 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1 1/4″, 3/8 x 1-1/4 |
| 50 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 51 | 1979526C2 | 1 | HANDLE |
| 52 | 1979751C2 | 1 | BAR |
| 1 | 181369C1 | 1 | HOUSING |
| 2 | 219-1 | 1 | NIPPLE, LUBE, 1/8″-27 x .66 lg |
| 3 | 219-434 | 1 | BREATHER, 1/8″-27 NPT, Short, w/washer, 1/8 PT x 1 |
| 4 | 191452C2 | 1 | PULLEY, Driven, 14-3/4 in OD |
| 5 | 189419C1 | 1 | HUB |
| 7 | 378691R1 | 2 | RING |
| 8 | 61802C91 | 2 | BEARING, CONE, 1-15/32 ID |
| 9 | 61801C1 | 2 | BEARING, CUP, 2-31/64 OD |
| 10 | 188931C1 | 1 | SEAL, Front |
| 11 | 384386R91 | 1 | SEAL, Rear |
| 12 | 1957657C2 | 1 | SHAFT, , BSN JJC0254999 |
| 12 | 411044A1 | 1 | SHAFT, , ASN JJC0255000 |
| 13 | 191518C2 | 1 | SPACER |
| 14 | 188930C1 | 1 | RING |
| 17 | 433-828 | 6 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 3/4″, G5, 1/2 x 1-3/4 |
| 18 | 396-41053 | 6 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN, 17/32 x 1-1/4 x 3/16 |
| 19 | 80679 | 6 | WASHER, LOCK, 1/2″ |
| 20 | 425-108 | 6 | NUT, 1/2″-13, G5 |
| 21 | 426-516 | 4 | BOLT, Hex, 5/16″-18 x 1″, G8, Full Thd, 5/16 x 1; 8 |
| 22 | 492-11031 | 4 | WASHER, LOCK, 5/16″ |
| 23 | 496-21106 | 2 | WASHER, 1 1/16″ x 2″ x .209″, Hardened |
| 24 | 232-41316 | 2 | NUT, LOCK, 1″-8, GC |
| 1 | 191388C1 | 1 | CASE, For 349262A1 Gearbox |
| 2 | 273916 | 1 | PLUG, Hex Hd, 1 5/16″-12 ORB, Includes Ref. 3 |
| 3 | 237-6016 | 1 | O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk |
| 4 | 122115A2 | 1 | GAUGE, Vented, Inc. 5, For 349262A1 Gearbox, Use with 122111A1, REF 7 |
| 5 | 238-5210 | 2 | O-RING, -210, 70 Duro, .734″ ID x .139″ Thk |
| 6 | 122113A1 | 1 | TUBE |
| 7 | 122111A1 | 1 | COVER, Without Hole, No Longer Used, For Service Order 122111A2, Ref. 44, For 349262A1 Gearbox |
| 8 | 191397C2 | 1 | GASKET |
| 9 | 413-612 | 7 | BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 10 | 492-11038 | 7 | WASHER, LOCK, 3/8″ |
| 11 | F53473 | 1 | NUT, 1/8 PT |
| 12 | 1339006C1 | 1 | HOSE, 914 mm (36 in.) |
| 13 | 188126 | 1 | PIPE, Nipple, 3/8″ NPT x 2″ |
| 14 | 144164 | 1 | O-RING |
| 15 | 80679 | 4 | WASHER, LOCK, 1/2″ |
| 16 | 413-816 | 4 | BOLT, Hex, 1/2″-13 x 1″, G5, Full Thd |
| 17 | 195428C1 | 2 | NUT |
| 18 | 496-21094 | 2 | WASHER, 15/16″ x 1 3/4″ x .179″, HDN |
| 19 | 1315597C1 | 1 | GEAR SET, 18/31T |
| 20 | 197609R91 | 3 | BEARING, CONE, 1-3/8 ID |
| 21 | 197608R1 | 3 | BEARING, CUP, 3 in. OD |
| 23 | 938294R91 | 1 | SEAL |
| 24 | 238-5250 | 1 | O-RING, -250, 70 Duro, 4.984″ ID x .139″ Thk |
| 25 | 191245C2 | 1 | HUB, For 349262A1 Gearbox |
| 25 | 404306A1 | 1 | HOUSING, For 400244A1 Gearbox |
| 26 | 219-434 | 1 | BREATHER, 1/8″-27 NPT, Short, w/washer, 1/8 PT x 1 |
| 27 | 492-11038 | 10 | WASHER, LOCK, 3/8″ |
| 28 | 413-620 | 10 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 29 | 618023R91 | 1 | BEARING, CONE, 1-3/8 inch ID |
| 30 | 618024R1 | 1 | BEARING, CUP, 2-1/2 OD |
| 31 | 192527C1 | 1 | SEAL |
| 32 | 191396C1 | 1 | SHAFT, Input |
| 34 | 238-5259 | 1 | O-RING, -259, 70 Duro, 6.234″ ID x .139″ Thk |
| 35 | 191248C1 | 1 | HUB |
| 36 | 935915R1 | 8 | SHIM, 0.015 in. |
| 37 | 426-824 | 2 | BOLT, Hex, 1/2″-13 x 1 1/2″, G8, Full Thd |
| 38 | 231-5148 | 2 | NUT, Flg, USR, 1/2″-13 |
| 39 | 192528C1 | 1 | SEAL |
| 40 | 191384C2 | 1 | SHAFT, Output |
| 41 | 496-21094 | 1 | WASHER, 15/16″ x 1 3/4″ x .179″, HDN |
| 42 | 231-46114 | 1 | NUT, LOCK, 7/8″-14, GB, 7/8 |
| 43 | 219-8 | 1 | NIPPLE, LUBE, 1/4″-28 NPT x .54″ lg |
| 44 | 122111A2 | 1 | PLATE, With Hole, For 349262A1 Gearbox |
| 44 | 391647A1 | 1 | PLATE, For 400244A1 Gearbox |
| 45 | 219-434 | 1 | BREATHER, 1/8″-27 NPT, Short, w/washer, 1/8 PT x 1 |
| 46 | 217-95 | 1 | COUPLING, 1/8″-27, Brass, For 349262A1 Gearbox |
| 46 | 221-1344 | 1 | COUPLING, 1/4 x 1/8, For 400244A1 Gearbox |
| 47 | 144587 | 1 | PIPE, Nipple, 1/8″ NPT x 2″, Brass, For 349262A1 Gearbox |
| 47 | 221-1142 | 1 | PIPE, Nipple, 1/4″ NPT x 4 1/2″, For 400244A1 Gearbox |
| 48 | 336513A1 | 1 | DIPSTICK, Non-Vented |
| 1 | 194521C1 | 1 | SUPPORT |
| 2 | 477-73812 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 3 | 231-5146 | 6 | NUT, Flg, USR, 3/8″-16 |
| 4 | 191399C2 | 1 | SUPPORT |
| 6 | 495-51053 | 4 | WASHER, 1/2″, 17/32 x 1 x 1/16 |
| 7 | 191497C1 | 1 | STRIP, 270 mm (10-5/8 in.) |
| 8 | 450-73816 | 2 | SCREW, CrossSerr Truss Hd, 3/8″-16 x 1″, 3/8 x 1 |
| 9 | 231-5146 | 7 | NUT, Flg, USR, 3/8″-16 |
| 10 | 477-73812 | 5 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 11 | 191496C1 | 1 | STRIP, 300 mm (11-7/8 in.) |
| 5 | 477-73816 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 1 | 1305297C1 | 1 | PULLEY, Driven, 22-9/16 OD, BSN JJC0253999 |
| 1 | 396781A1 | 1 | PULLEY, Driven, 22-9/16 OD, ASN JJC0254000 |
| 2 | 192738C1 | 1 | V-BELT, 3816 mm (150-1/4 in.), Without Rock Trap |
| 2 | 1315168C1 | 1 | V-BELT, 4229 mm (166-1/2 in.), With Rock Trap |
| 3 | 194383C3 | 1 | BRACKET |
| 4 | 477-73116 | 2 | SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1″, 5/16 x 1 |
| 5 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 6 | 191603C2 | 1 | PULLEY, Drive, 12 in. OD |
| 7 | 185414C2 | 1 | SUPPORT |
| 8 | 477-73820 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1 1/4″, 3/8 x 1-1/4 |
| 9 | 231-5146 | 6 | NUT, Flg, USR, 3/8″-16 |
| 10 | 495-81069 | 6 | WASHER, 1 1/32″ x 1 1/2″ x .060″, 1-1/32 x 1-1/2 x 1/16 |
| 12 | 174757C1 | 1 | PULLEY, Idler, 8 in. OD |
| 13 | 559205R91 | 1 | BEARING |
| 14 | 1302308C1 | 2 | BUSHING, 1 x 1-1/4 x 1-1/8 |
| 15 | 432-1624 | 1 | PIN, SPLIT (COTTER), 1/4″ x 1 1/2″ |
| 16 | 219-8 | 1 | NIPPLE, LUBE, 1/4″-28 NPT x .54″ lg |
| 17 | 116032A1 | 1 | HOOK |
| 18 | 432-1216 | 3 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 19 | 116028A2 | 1 | HOLDER |
| 20 | 432-1216 | 1 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 21 | 495-81225 | 1 | WASHER, 1 17/32″ x 2 1/2″ x .060″, 1-17/32 x 2-1/2 x 3/64 |
| 22 | 432-1240 | 1 | PIN, SPLIT (COTTER), 3/16″ x 2 1/2″ |
| 23 | 425-108 | 3 | NUT, 1/2″-13, G5 |
| 24 | 182922A1 | 1 | SUPPORT |
| 25 | 186890C4 | 1 | PIVOT |
| 27 | 182921A1 | 1 | SPACER |
| 28 | 495-81162 | 1 | WASHER, 17/32″ x 1 1/2″ x .179″, 17/32 x 1-1/2 x 3/16 |
| 29 | 194216C3 | 1 | ROD |
| 30 | 427-6156 | 1 | PIN, CLEVIS, 3/8″ x 1 9/16″ |
| 31 | 432-612 | 1 | PIN, SPLIT (COTTER), 3/32″ x 3/4″ |
| 32 | 133405C92 | 1 | CYLINDER, Feeder Clutch, See Figure 08-33 |
| 33 | 439-1652 | 1 | PIN, HEADED, 3/8″ x 3 1/4″, 3/8 x 3-1/4; 2 |
| 34 | 432-812 | 1 | PIN, SPLIT (COTTER), 1/8″ x 3/4″ |
| 35 | 194369C2 | 1 | SUPPORT |
| 36 | 413-824 | 2 | BOLT, Hex, 1/2″-13 x 1 1/2″, G5, Full Thd, 1/2 x 1-1/2 |
| 37 | 495-11053 | 2 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 38 | 231-5148 | 2 | NUT, Flg, USR, 1/2″-13 |
| 39 | 183373A1 | 1 | PLATE, LARGE, , Without Rock Trap |
| 40 | 195109C1 | 1 | ROD ASSY. |
| 42 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 43 | 937781R92 | 1 | HOSE, 686 mm (27-1/8 in.) |
| 44 | F53473 | 1 | NUT, 1/8 PT |
| 45 | 516-23127 | 1 | CLAMP, J, 9/16″ Insul, 3/8″ Bolt, , Without Rock Trap |
| 45 | 370383R1 | 1 | CLIP, , With Rock Trap |
| 46 | 477-73812 | 1 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 47 | 231-5146 | 1 | NUT, Flg, USR, 3/8″-16 |
| 8 | 477-73816 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 41 | 477-73816 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 1 | 186081C1 | 1 | ANGLE |
| 2 | 231-5145 | 4 | NUT, Flg, USR, 5/16″-18 |
| 3 | 409-7516 | 2 | BOLT, Hex Flg, 5/16″-18 x 1″, Serr |
| 4 | 135755A3 | 1 | SUPPORT |
| 5 | 477-73108 | 2 | SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1/2″, 5/16 x 1/2 |
| 6 | 175070A3 | 1 | SHIELD, , Without Rock Trap |
| 7 | 183584A1 | 1 | GUARD, , With Rock Trap |
| 8 | 192124C6 | 1 | COVER |
| 10 | 188315C1 | 1 | DOOR |
| 11 | 477-82508 | 1 | SCREW, Sltd Serr Truss Hd, 1/4″-20 x 1/2″, 1/4 x 1/2; 8 |
| 12 | 413-48 | 1 | BOLT, Hex, 1/4″-20 x 1/2″, G5, Full Thd, 1/4 x 1/2 |
| 13 | 231-1444 | 1 | NUT, LOCK, 1/4″-20, GB |
| 14 | 129-409 | 1 | NUT, WING, 1/4″-20 |
| 15 | 135602A1 | 1 | SUPPORT |
| 16 | 477-73812 | 12 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 17 | 231-5146 | 18 | NUT, Flg, USR, 3/8″-16 |
| 18 | 194380C4 | 1 | HOUSING |
| 19 | 477-73820 | 3 | SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1 1/4″, 3/8 x 1-1/4 |
| 20 | 188045C2 | 1 | SUPPORT ASSY. |
| 21 | 185334A2 | 1 | SHIELD |
| 22 | 409-7512 | 2 | BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr |
| 23 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 24 | 194364C2 | 1 | HINGE |
| 25 | 182804A1 | 1 | PLATE, LARGE |
| 26 | 132970A4 | 1 | SHIELD, , Without Rock Trap |
| 27 | 132968A4 | 1 | SHIELD, , With Rock Trap |
| 28 | 132971A4 | 1 | COVER, , Without Rock Trap |
| 29 | 132969A3 | 1 | COVER, , With Rock Trap |
| 30 | 192131C5 | 1 | SUPPORT, , Without Rock Trap |
| 31 | 1989332C5 | 1 | SUPPORT, , With Rock Trap |
| 32 | 1315075C1 | 1 | ANGLE, , With Rock Trap |
| 33 | 1315083C1 | 1 | SUPPORT, , With Rock Trap |
| 37 | 231-5146 | 6 | NUT, Flg, USR, 3/8″-16 |
| 38 | 477-73812 | 5 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 39 | 516-23127 | 1 | CLAMP, J, 9/16″ Insul, 3/8″ Bolt, Not Illustrated |
| 34 | 477-73816 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 1 | 238967A2 | 1 | PULLEY |
| 3 | 193282C91 | 1 | BEARING, BALL |
| 4 | 219-40 | 1 | NIPPLE, LUBE, 65є, 1/8″ NPT x 7/8″ lg, 65 deg., 1/8 PT x 7/8 |
| 5 | 100-11200 | 1 | RING, SNAP, #200, Ext |
| 6 | 239239A2 | 1 | SUPPORT, Right Hand |
| 7 | 240436A2 | 1 | SUPPORT |
| 8 | 433-1028 | 4 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 1 3/4″, G5, 5/8 x 1-3/4 |
| 9 | 231-51410 | 4 | NUT, Flg, USR, 5/8″-11 |
| 10 | 498-81010 | 4 | WASHER, 41/64″ x 1 1/2″ x .105″, Sq Hole, Square Hole, 21/32 x 1-1/2 x 3/32 |
| 11 | 413-820 | 2 | BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 12 | 231-5148 | 2 | NUT, Flg, USR, 1/2″-13 |
| 14 | 1305375C1 | 4 | SPACER |
| 15 | 492-11038 | 4 | WASHER, LOCK, 3/8″ |
| 16 | 329-106 | 4 | NUT, 3/8″-16, G8 |
| 17 | 185955C1 | 1 | PLATE |
| 18 | 181579C1 | 2 | LINING |
| 19 | Q3959 | 2 | KEY, Gib, 3/8″ Sq x 4 1/2″ |
| 20 | 1305154C2 | 1 | HUB |
| 21 | 1305297C1 | 1 | PULLEY, Driven, 22-9/16 OD, See Figure 09A-10 |
| 22 | 1305220C91 | 1 | HUB ASSY., Inc. 23 |
| 23 | 610435C1 | 1 | BUSHING |
| 24 | 1305288C1 | 1 | PULLEY, Drive, 16-11/16 OD |
| 26 | 584608R1 | 1 | SPACER, 86 mm (3-3/8 in.) |
| 27 | 1320160C3 | 1 | SHAFT, Conveyor, See Figure 09A-22 |
| 28 | 1305393C1 | 1 | SPACER, Left Hand, 2-35/64 |
| 29 | 1315319C1 | 8 | BOLT, 3/8 x 6; 8 |
| 30 | 1315316C1 | 2 | SUPPORT, , With Rock Trap |
| 31 | 1305370C3 | 8 | SPACER |
| 32 | 495-81129 | 8 | WASHER, 13/32″ x 3/4″ x .120″, 13/32 x 3/4 x 7/64 |
| 33 | 495-81143 | 16 | WASHER, 13/32″ x 1 1/2″ x .120″, 13/32 x 1-1/2 x 7/64 |
| 34 | 231-4116 | 8 | NUT, LOCK, 3/8″-16, GB, 3/8 |
| 35 | 432-2040 | 1 | PIN, SPLIT (COTTER), 5/16″ x 2 1/2″, 5/16″ x 2 1/2″ |
| 37 | 1313097C3 | 1 | BELT, 146 in. ov cntr, With 54-1/2 Inch Feeder |
| 37 | 1308489C2 | 1 | BELT, 132 in. ov cntr, With 60 Inch Feeder |
| 38 | 176579C1 | 1 | PULLEY, Drive Tightener, 8 in. OD, See Figure(s) 09A-13 – 09A-15 |
| 39 | 326-656 | 4 | BOLT, Hex, 3/8″-16 x 3 1/2″, G8 |
| 40 | 239235A3 | 1 | SHAFT |
| 41 | 240746A1 | 1 | BEARING, BALL |
| 42 | 253469A1 | 1 | COLLAR |
| 43 | 253533A1 | 1 | HUB |
| 44 | 253462A1 | 1 | RING, SPECIAL |
| 45 | 484-1386 | 1 | SET SCREW, Hex Soc, 3/8″-24 x 3/8″, 3/8 x 3/8 NF |
| 1 | 238967A2 | 1 | PULLEY |
| 3 | 193282C91 | 1 | BEARING, BALL |
| 4 | 219-40 | 1 | NIPPLE, LUBE, 65є, 1/8″ NPT x 7/8″ lg, 65 degree, 1/8 PT x 7/8 |
| 5 | 100-11200 | 1 | RING, SNAP, #200, Ext |
| 6 | 239239A2 | 1 | SUPPORT, Right Hand |
| 7 | 240436A2 | 1 | SUPPORT |
| 8 | 433-1028 | 4 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 1 3/4″, G5, 5/8 x 1-3/4 |
| 9 | 231-51410 | 4 | NUT, Flg, USR, 5/8″-11 |
| 10 | 498-81010 | 4 | WASHER, 41/64″ x 1 1/2″ x .105″, Sq Hole, Square Hole, 21/32 x 1-1/2 x 3/32 |
| 11 | 477-73112 | 2 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 12 | 231-5148 | 8 | NUT, Flg, USR, 1/2″-13 |
| 14 | 425-1410 | 4 | NUT, Jam, 5/8″-11, G5, 5/8 |
| 15 | 396133A1 | 1 | SUPPORT, Left Hand |
| 16 | 326-656 | 4 | BOLT, Hex, 3/8″-16 x 3 1/2″, G8 |
| 17 | 1305375C1 | 4 | SPACER |
| 18 | 492-11038 | 4 | WASHER, LOCK, 3/8″ |
| 19 | 329-106 | 4 | NUT, 3/8″-16, G8 |
| 20 | 398550A2 | 1 | PLATE |
| 21 | 181579C1 | 2 | LINING |
| 22 | Q3959 | 2 | KEY, Gib, 3/8″ Sq x 4 1/2″ |
| 23 | 398526A1 | 1 | HUB |
| 24 | 396781A1 | 1 | PULLEY, Driven, 22-9/16 OD, See Figure 09A-10 |
| 25 | 1305220C91 | 1 | HUB ASSY., Inc. 26 |
| 26 | 610435C1 | 1 | BUSHING |
| 27 | 1305288C1 | 1 | PULLEY, Drive, 16-11/16 OD |
| 29 | 1305393C1 | 1 | SPACER, 2-35/64 |
| 31 | 162172C1 | 1 | SPACER, 1-13/16 x 2-1/4 x 1-15/16 |
| 32 | 1315319C1 | 8 | BOLT, 3/8 x 6; 8 |
| 33 | 1315316C1 | 2 | SUPPORT, , With Rock Trap |
| 34 | 1305370C3 | 8 | SPACER |
| 35 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 38 | 231-4116 | 8 | NUT, LOCK, 3/8″-16, GB, 3/8 |
| 39 | 1308489C2 | 1 | BELT, 132 in. ov cntr, With 60 Inch Feeder |
| 39 | 1313097C3 | 1 | BELT, 146 in. ov cntr, With 54-1/2 Inch Feeder |
| 40 | 176579C1 | 1 | PULLEY, Drive Tightener, 8 in. OD |
| 41 | 241577A1 | 1 | FLANGE, Inc. 42 |
| 42 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 43 | 241578A1 | 1 | FLANGE |
| 44 | 434-820 | 4 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 45 | 413-820 | 3 | BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 46 | 388771A1 | 1 | SHAFT |
| 47 | 240746A1 | 1 | BEARING, BALL |
| 48 | 253469A1 | 1 | COLLAR |
| 49 | 253533A1 | 1 | HUB |
| 50 | 253462A1 | 1 | RING, SPECIAL |
| 51 | 484-1386 | 1 | SET SCREW, Hex Soc, 3/8″-24 x 3/8″, 3/8 x 3/8 NF |
| 52 | 391952A1 | 1 | TUBE, Plastic |
| 53 | 388770A1 | 1 | BRACKET |
| 54 | 396135A1 | 1 | BRACKET |
| 55 | 360-1020 | 2 | BOLT, Hex Flg, 5/8″-11 x 1 1/4″, G8, 5/8 x 1-1/4; 8 |
| 56 | 232-51310 | 2 | NUT, Flg, USR, 5/8″-12, 5/8; 8 |
| 57 | 409-7820 | 1 | BOLT, Hex Flg, 1/2″-13 x 1 1/4″, Serr |
| 58 | 398547A2 | 2 | PAWL |
| 59 | 396073A1 | 2 | BOLT, SPECIAL |
| 60 | 86989592 | 2 | SPRING |
| 61 | 86988966 | 2 | CLIP |
| 62 | 398098A1 | 1 | RATCHET |
| 63 | 461-35024 | 4 | SCREW, Hex Soc Hd, 1/2″-13 x 1 1/2″, 1/2 x 1-1/2 |
| 1 | 176579C1 | 1 | PULLEY, Drive Tightener, 8 in. OD |
| 2 | 182322C1 | 1 | SUPPORT |
| 3 | 434-612 | 2 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 4 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 6 | M74461 | 1 | SPACER, 1″ Pipe x 3/4″ |
| 7 | 434-612 | 2 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 8 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 9 | 182323C1 | 1 | SUPPORT |
| 10 | 1321982C2 | 1 | ARM |
| 11 | 219-37 | 1 | NIPPLE, LUBE, 45є, 1/4″ NPT x .81″ lg |
| 12 | 425-108 | 1 | NUT, 1/2″-13, G5 |
| 13 | 495-71053 | 2 | WASHER, 1/2″, 17/32 x 1-3/4 x 3/32 |
| 15 | 176581C1 | 1 | SPACER |
| 16 | 194652C1 | 1 | PIVOT |
| 17 | 197410C1 | 1 | BOLT |
| 18 | 485-13116 | 2 | SET SCREW, Sq Hd, 5/16″-18 x 1″, Cup pt |
| 19 | 425-105 | 2 | NUT, 5/16″-18, G5 |
| 20 | 135260A1 | 1 | SCREW, 5/8 x 5 |
| 21 | 169256C2 | 5 | WASHER, 41/64 x 1-1/4 x 1/8 |
| 23 | 232-41110 | 1 | NUT, LOCK, 5/8″-11, GC |
| 24 | 396-41066 | 1 | WASHER, 21/32″ x 1 1/2″ x .188″, HDN, 21/32 x 1-1/2 x 3/16 |
| 1 | 425-108 | 3 | NUT, 1/2″-13, G5, , BSN JJC0255699 |
| 1 | 425-1010 | 2 | NUT, 5/8″-11, G5, , ASN JJC0255700 |
| 1 | 86990149 | 1 | NUT, 5/8, ASN JJC0255700 |
| 2 | 411922A1 | 1 | TENSIONER, , BSN JJC0255699 |
| 2 | 86988850 | 1 | TENSIONER, 5/8, ASN JJC0255700 |
| 3 | 413528A1 | 1 | WASHER, Plastic, 1-1/16 x 2 x 1/16 |
| 4 | 495-11106 | 1 | WASHER, 1″, SAE, (1-1/16 x 2 x 1/8″), BSN JJC0255699 |
| 4 | 495-81191 | 1 | WASHER, 1 5/32″ x 2″ x .060″, 1-5/32 x 2 x 1/16, ASN JJC0255700 |
| 5 | 389973A2 | 1 | TUBE |
| 6 | 389972A1 | 1 | SPRING |
| 7 | 495-21081 | 1 | WASHER, 3/4″, 13/16 x 2 x 9/64, BSN JJC0255699 |
| 7 | 389974A1 | 1 | WASHER, Spring Guide, ASN JJC0255700 |
| 8 | 413909A1 | 1 | WASHER |
| 9 | 495-81039 | 2 | WASHER, 25/32″ x 1 1/4″ x .120″, 25/32 x 1-1/4 x 7/64 |
| 10 | 413984A1 | 1 | PIVOT |
| 11 | 413513A1 | 1 | SLEEVE |
| 12 | 411925A1 | 1 | ARM |
| 13 | 413526A1 | 1 | ROD |
| 14 | 219-37 | 1 | NIPPLE, LUBE, 45є, 1/4″ NPT x .81″ lg |
| 16 | M74461 | 1 | SPACER, 1″ Pipe x 3/4″ |
| 18 | 176579C1 | 1 | PULLEY, Drive Tightener, 8 in. OD |
| 19 | 135260A1 | 1 | SCREW, 5/8 x 5 |
| 20 | 495-11066 | 5 | WASHER, 5/8″, SAE, 21/32 x 1-5/16 x 3/32 |
| 22 | 485-13116 | 2 | SET SCREW, Sq Hd, 5/16″-18 x 1″, Cup pt |
| 23 | 425-105 | 2 | NUT, 5/16″-18, G5 |
| 24 | 232-41110 | 1 | NUT, LOCK, 5/8″-11, GC |
| 25 | 396-41066 | 1 | WASHER, 21/32″ x 1 1/2″ x .188″, HDN, 21/32 x 1-1/2 x 3/16 |
| 26 | 182323C1 | 1 | SUPPORT |
| 27 | 182322C1 | 1 | SUPPORT |
| 28 | 434-612 | 2 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 29 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 30 | 434-612 | 2 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 31 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 32 | 412294A1 | 1 | STRAP, , BSN JJC0254101 |
| 33 | 413-616 | 1 | BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd, , BSN JJC0254101 |
| 34 | 425-106 | 1 | NUT, 3/8″-16, G5, , BSN JJC0254101 |
| 35 | 409-7816 | 1 | BOLT, Hex Flg, 1/2″-13 x 1″, Serr, 1/2 x 1, BSN JJC0254101 |
| 36 | 231-5148 | 1 | NUT, Flg, USR, 1/2″-13, , BSN JJC0254101 |
| 1 | 235863A2 | 1 | GUARD, Rear, Inc. 3, Also Includes Decal, See Figure 09H-21, Ref. 4, With 60 Inch Feeder |
| 2 | 235862A2 | 1 | GUARD, Rear, Inc. 3, Also Includes Decal, See Figure 09H-21, Ref. 4, With 54-1/2 Inch Feeder |
| 3 | D55216 | 3 | STRIP, ANTI-SKID, 2 x 9 in. |
| 4 | 495-11034 | 1 | WASHER, 5/16″, SAE, (11/32 x 11/16 x 1/16″) |
| 5 | 186675A2 | 1 | GUARD |
| 8 | 1321851C2 | 1 | SUPPORT, Lower Rear |
| 9 | 1327779C1 | 1 | SUPPORT, Upper Rear |
| 10 | 434-612 | 3 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 3/4″, G5, Full Thd |
| 11 | 231-5146 | 3 | NUT, Flg, USR, 3/8″-16 |
| 12 | 1321853C2 | 1 | SUPPORT, Lower Front |
| 13 | 413-512 | 2 | BOLT, Hex, 5/16″-18 x 3/4″, G5, Full Thd |
| 14 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 15 | 139079A2 | 1 | SUPPORT, Rear, If Used |
| 16 | 138699A1 | 1 | LOCK |
| 17 | 132657A2 | 1 | CABLE |
| 18 | 413-416 | 2 | BOLT, Hex, 1/4″-20 x 1″, G5 |
| 19 | 231-5144 | 4 | NUT, Flg, USR, 1/4″-20 |
| 20 | 160638C2 | 1 | HANDLE, , With 60 Inch Feeder |
| 21 | 138179A3 | 2 | LATCH, , Australia Only |
| 22 | 139108A1 | 1 | PLATE |
| 23 | 256873 | 6 | BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr |
| 24 | 231-5145 | 6 | NUT, Flg, USR, 5/16″-18 |
| 25 | 129901A2 | 1 | GUARD, Right Hand Rear |
| 26 | 477-73812 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 27 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 28 | 129707A4 | 1 | SHIELD, Front |
| 29 | 256873 | 2 | BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr |
| 30 | 231-5145 | 6 | NUT, Flg, USR, 5/16″-18 |
| 31 | 477-73112 | 4 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 32 | 129714A2 | 1 | GUARD, Right Hand Front |
| 33 | 1345199C2 | 2 | SUPPORT |
| 34 | 413-472 | 2 | BOLT, Hex, 1/4″-20 x 4 1/2″, G5, 1/4 x 4-1/2 |
| 35 | 231-4144 | 2 | NUT, LOCK, 1/4″-20, GB |
| 36 | 477-73812 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″ |
| 37 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 |
| 38 | 240436A2 | 2 | SUPPORT |
| 39 | 239240A2 | 1 | SUPPORT, Left Hand |
| 40 | 413-1024 | 1 | BOLT, Hex, 5/8″-11 x 1 1/2″, G5, Full Thd |
| 41 | 396-41066 | 1 | WASHER, 21/32″ x 1 1/2″ x .188″, HDN |
| 42 | 231-51410 | 1 | NUT, Flg, USR, 5/8″-11, , With Field Tracker |
| 43 | 241578A1 | 1 | FLANGE, , Without Overhead Circuit Breaker Panel |
| 45 | 241577A1 | 1 | FLANGE |
| 46 | 434-820 | 4 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd |
| 47 | 231-5148 | 7 | NUT, Flg, USR, 1/2″-13 |
| 48 | 240438A2 | 1 | TUBE |
| 49 | 129903A2 | 1 | GUARD, Left Hand Rear |
| 50 | 477-73812 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″ |
| 51 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 52 | 129717A1 | 1 | GUARD, Left Hand Front |
| 53 | 235885A1 | 2 | SUPPORT |
| 54 | 235873A1 | 1 | SHIELD, Lower, With 54-1/2 Inch Feeder |
| 54 | 235874A1 | 1 | SHIELD, Lower, With 60 Inch Feeder |
| 55 | 477-73108 | 2 | SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1/2″ |
| 56 | 409-7816 | 3 | BOLT, Hex Flg, 1/2″-13 x 1″, Serr, 1/2 x 1 |
| 60 | 282-1448 | 2 | SCREW, SELF TAPPING, Hex Wash Hd, #8 x 1/2″, No. 8-18 x 1 |
| 61 | 138180A1 | 1 | COVER, , Australia Only |
| 62 | 409-7612 | 2 | BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr, , Australia Only |
| 63 | 495-21044 | 2 | WASHER, 3/8″, , Australia Only |
| 64 | 231-4116 | 2 | NUT, LOCK, 3/8″-16, GB, , Australia Only |
| 65 | 138629A1 | 2 | COVER, , Australia Only |
| 66 | 248406A1 | 1 | GUARD, Rubber, Not Illustrated |
| 67 | 252441A1 | 1 | RETAINER, SEAL, Not Illustrated |
| 1 | 390383A1 | 1 | SHIELD, Rear, Inc. 3, Also Includes Decal, See Figure 09H-21, Ref. 4, With 60 Inch Feeder |
| 2 | 390390A1 | 1 | SHIELD, Rear, Inc. 3, Also Includes Decal, See Figure 09H-21, Ref. 4, Used with 54-1/2 Inch Feeder |
| 3 | D55216 | 3 | STRIP, ANTI-SKID, 2 x 9 in. |
| 5 | 186675A2 | 1 | GUARD |
| 8 | 1321851C2 | 1 | SUPPORT, Lower Rear |
| 9 | 1327779C1 | 1 | SUPPORT, Upper Rear |
| 10 | 434-612 | 2 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 11 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 12 | 1321853C2 | 1 | SUPPORT, Lower Front |
| 13 | 256873 | 2 | BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr |
| 14 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 15 | 139079A2 | 1 | SUPPORT, Rear |
| 16 | 138699A1 | 1 | LOCK |
| 17 | 132657A2 | 1 | CABLE |
| 18 | 413-416 | 2 | BOLT, Hex, 1/4″-20 x 1″, G5 |
| 19 | 231-5144 | 4 | NUT, Flg, USR, 1/4″-20 |
| 20 | 138629A1 | 1 | COVER, Left Hand, Not Illustrated, Australia Only |
| 21 | 138179A3 | 2 | LATCH, Not Illustrated |
| 22 | 139108A1 | 1 | PLATE |
| 23 | 256873 | 6 | BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr |
| 24 | 231-5145 | 6 | NUT, Flg, USR, 5/16″-18 |
| 25 | 129901A2 | 1 | GUARD, Right Hand Rear |
| 27 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 28 | 129707A4 | 1 | SHIELD, Front |
| 29 | 256873 | 2 | BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr |
| 30 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 32 | 129714A2 | 1 | GUARD, Right Hand Front |
| 33 | 1345199C2 | 2 | SUPPORT |
| 34 | 413-472 | 2 | BOLT, Hex, 1/4″-20 x 4 1/2″, G5, 1/4 x 4-1/2 |
| 35 | 231-4144 | 2 | NUT, LOCK, 1/4″-20, GB |
| 37 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 38 | 406610A1 | 1 | SHIELD |
| 39 | 409-7616 | 2 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 40 | 495-11041 | 2 | WASHER, 3/8″, SAE, (13/32 x 13/16 x 1/16″) |
| 41 | 231-4116 | 2 | NUT, LOCK, 3/8″-16, GB, 3/8 |
| 42 | 160638C2 | 1 | HANDLE |
| 43 | 477-73108 | 2 | SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1/2″, 5/16 x 1/2 |
| 44 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 45 | 407153A1 | 1 | GUIDE |
| 46 | 138179A3 | 1 | LATCH |
| 47 | 477-73112 | 2 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 48 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 49 | 406609A1 | 1 | SHIELD, Left Hand Rear |
| 50 | 409-7612 | 4 | BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr |
| 52 | 406608A1 | 1 | SHIELD, Left Hand Front |
| 56 | 235885A1 | 1 | SUPPORT |
| 57 | 477-73108 | 2 | SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1/2″, 5/16 x 1/2 |
| 58 | 235873A1 | 1 | SHIELD, Lower, With 54-1/2 Inch Feeder |
| 58 | 235874A1 | 1 | SHIELD, Lower, With 60 Inch Feeder |
| 59 | 138629A1 | 1 | COVER, Not Illustrated |
| 62 | 409-7612 | 2 | BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr, , Australia Only |
| 63 | 495-21044 | 2 | WASHER, 3/8″, 7/16 x 1 x 5/64, Australia Only |
| 64 | 231-4116 | 2 | NUT, LOCK, 3/8″-16, GB, 3/8, Australia Only |
| 65 | 138180A1 | 1 | COVER, , Australia Only |
| 66 | 248406A1 | 1 | GUARD, Rubber, Not Illustrated |
| 67 | 252441A1 | 1 | RETAINER, SEAL, Not Illustrated |
| 68 | 584608R1 | 1 | SPACER, 86 mm (3-3/8 in.) |
| 69 | 495-81093 | 7 | WASHER, 1 25/32″ x 2 1/2″ x .120″, 1-3/4 x 2-1/2 x 1/8 |
| 70 | 390532A1 | 1 | PLATE, , Without Rock Trap |
| 71 | 495-81092 | 1 | WASHER, 1 25/32″ x 2 1/2″ x .060″, 1-25/32 x 2-1/2 x 3/64 |
| 72 | 432-2440 | 1 | PIN, SPLIT (COTTER), 3/8″ x 2 1/2″, 3/8″ x 2 1/2″, BSN JJC0254999 |
| 72 | 38-12440 | 1 | PIN, LOCK, 3/8″ x 2 1/2″, Slotted, Spring, 2-1/2 x 3/4, ASN JJC0255000 |
| 73 | 392857A2 | 1 | BRACKET, , Without Rock Trap |
| 74 | 392858A2 | 1 | SHIELD, , Without Rock Trap |
| 75 | 434-512 | 2 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 3/4″, G5, Full Thd |
| 76 | 231-5145 | 4 | NUT, Flg, USR, 5/16″-18 |
| 77 | 281-1478 | 2 | SCREW, SELF TAPPING, Hex Wash Hd, 1/4″ x 1/2″, 1/4 x 1/2 |
| 78 | 515-2395 | 1 | CLAMP, 3/8″, Insul, 3/8″ Bolt |
| 79 | 409-7512 | 2 | BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr |
| 81 | 425-1512 | 1 | NUT, Jam, 3/4″-10, G5, 3/4 NF |
| 82 | 1305393C1 | 1 | SPACER, 2-35/64 |
| 26 | 477-73816 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 36 | 477-73816 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 1 | 239801A2 | 1 | HOUSING, Includes Decal, See Figure(s) 09H-20, Ref. 2; 09H-21, Ref. 9, With 60 Inch Feeder |
| 1 | 239800A2 | 1 | HOUSING, Includes Decal, See Figure(s) 09H-20, Ref. 2; 09H-21, Ref. 9, With 54-1/2 Inch Feeder |
| 2 | 1994217C2 | 1 | SHEET, , With 60 Inch Feeder |
| 2 | 118845A1 | 1 | BOTTOM, Perforated, With 60 Inch Feeder |
| 2 | 1324578C2 | 1 | PLATE, , With 54-1/2 Inch Feeder |
| 2 | 1313970C1 | 1 | PANEL, Perforated, With 54-1/2 Inch Feeder |
| 3 | 415-820 | 4 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G8, Full Thd, 1/2 x 1-1/4; 8 |
| 5 | 433-1028 | 2 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 1 3/4″, G5, 5/8 x 1-3/4 |
| 6 | 433-1036 | 6 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 2 1/4″, G5, 5/8 x 2-1/4 |
| 7 | 498-81008 | 6 | WASHER, 41/64″ x 1 1/4″ x .060″, Sq Hole, 21/32 x 1-1/4 x 1/16 |
| 8 | 231-14410 | 6 | NUT, LOCK, 5/8″-11, GB |
| 9 | 496-21066 | 6 | WASHER, 21/32″ x 1 5/16″ x .150″ |
| 10 | 186852C1 | 4 | NUT, 1/2, 8 |
| 12 | 434-616 | 2 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd |
| 13 | 492-11038 | 2 | WASHER, LOCK, 3/8″ |
| 14 | 425-106 | 2 | NUT, 3/8″-16, G5 |
| 15 | 434-612 | 4 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 16 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 |
| 17 | 477-73112 | 2 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 18 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 19 | 477-73812 | 3 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 20 | 231-5146 | 3 | NUT, Flg, USR, 3/8″-16 |
| 21 | 241769A2 | 1 | ADAPTER |
| 22 | 1338021C1 | 2 | PIN |
| 23 | 231-1445 | 2 | NUT, LOCK, 5/16″-18, GB |
| 24 | 495-11034 | 4 | WASHER, 5/16″, SAE, (11/32 x 11/16 x 1/16″) |
| 25 | 367833R1 | 2 | SPRING |
| 26 | 177138C1 | 2 | ROD |
| 27 | 179024C1 | 2 | HINGE |
| 28 | 38-1816 | 2 | PIN, LOCK, 1/8″ x 1″, Slotted, 1/8″ x 1″, Slotted |
| 29 | 495-81175 | 4 | WASHER, 21/32″ x 1″ x .120″, 21/32 x 1 x 7/64 |
| 30 | 38-11616 | 2 | PIN, LOCK, 1/4″ x 1″, Slotted |
| 31 | 177141C1 | 2 | PIN |
| 32 | 1321735C2 | 2 | BOLT |
| 33 | 329-108 | 4 | NUT, 1/2″-13, G8 |
| 34 | 439-5836 | 2 | PIN, HEADED, 1/2″ x 2 1/4″, 1/2 x 2-1/4 |
| 35 | 495-11053 | 2 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 36 | 432-1216 | 2 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 37 | 231-5145 | 16 | NUT, Flg, USR, 5/16″-18 |
| 38 | 1327737C2 | 2 | PLATE |
| 39 | 95-81018 | 2 | WASHER, 21/32″ x 2 1/2″ x .120″, 21/32 x 2-1/2 x 1/8 |
| 40 | 184853C1 | 1 | DEFLECTOR, Left Hand |
| 41 | 184854C1 | 1 | DEFLECTOR, Right Hand |
| 42 | 477-73112 | 16 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 43 | 1319474C1 | 1 | BAND |
| 44 | 1319479C1 | 1 | COVER |
| 45 | 409-7516 | 12 | BOLT, Hex Flg, 5/16″-18 x 1″, Serr |
| 46 | 495-21038 | 5 | WASHER, 5/16″, 3/8 x 7/8 x 3/32 |
| 46 | 495-81001 | 7 | WASHER, 5/16″, 3/8 x 1-1/8 x 1/16 |
| 47 | 232-4115 | 5 | NUT, LOCK, 5/16″-18, GC |
| 47 | 231-5345 | 7 | NUT, LOCK, Flg, 5/16″-18, 5/16 |
| 48 | 1321640C1 | 2 | GROMMET |
| 49 | 1327752C1 | 1 | SEAL, Left Hand |
| 50 | 1327753C1 | 1 | SEAL, Right Hand |
| 51 | 109253A1 | 1 | PLATE, LARGE, Cut From 1330108CX |
| 52 | 140767A2 | 2 | HINGE |
| 53 | 140768A4 | 1 | STEP |
| 57 | 126046A1 | 2 | GASKET, 292 mm (11-1/2 in.), Cut From 1330108CX |
| 58 | 495-81030 | 6 | WASHER, 21/32″ x 2″ x .179″, 21/32 x 2 x 11/64 |
| 59 | 477-73808 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1/2″, 3/8 x 1/2 |
| 60 | 249827A1 | 4 | COVER |
| 61 | 425-106 | 4 | NUT, 3/8″-16, G5 |
| 1 | 400718A2 | 1 | FEEDER, Includes Decal, See Figure 09H-21, Ref. 2, 9, With 60 Inch Feeder |
| 1 | 400717A2 | 1 | FEEDER, Includes Decal, See Figure 09H-21, Ref. 2, 9, With 54-1/2 Inch Feeder |
| 2 | 118845A1 | 1 | BOTTOM, Perforated, With 60 Inch Feeder |
| 2 | 1994217C2 | 1 | SHEET, , With 60 Inch Feeder |
| 2 | 1324578C2 | 1 | PLATE, , With 54-1/2 Inch Feeder |
| 2 | 1313970C1 | 1 | PANEL, Perforated, With 54-1/2 Inch Feeder |
| 3 | 415-820 | 4 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G8, Full Thd, 1/2 x 1-1/4; 8 |
| 5 | 416-1028 | 2 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 1 3/4″, G8, 5/8 x 1-3/4; 8 |
| 6 | 416-1036 | 4 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 2 1/4″, G8, 5/8 x 2-1/4; 8 |
| 7 | 498-81010 | 6 | WASHER, 41/64″ x 1 1/2″ x .105″, Sq Hole, Square Hole, 21/32 x 1-1/2 x 3/32 |
| 8 | 400025A1 | 6 | NUT, 5/8; 8 |
| 9 | 145678C3 | 6 | WASHER, 17 mm |
| 10 | 186852C1 | 4 | NUT, 1/2, 8 |
| 12 | 434-616 | 2 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1″, G5, Full Thd |
| 13 | 492-11038 | 2 | WASHER, LOCK, 3/8″ |
| 14 | 425-106 | 2 | NUT, 3/8″-16, G5 |
| 15 | 434-612 | 4 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 3/4″, G5, Full Thd, 3/8 x 3/4 |
| 16 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 |
| 17 | 477-73112 | 2 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 18 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 19 | 477-73812 | 3 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 20 | 231-5146 | 3 | NUT, Flg, USR, 3/8″-16 |
| 21 | 241769A3 | 1 | ADAPTER |
| 22 | 1338021C1 | 2 | PIN |
| 23 | 231-1445 | 2 | NUT, LOCK, 5/16″-18, GB |
| 24 | 495-11034 | 4 | WASHER, 5/16″, SAE, (11/32 x 11/16 x 1/16″) |
| 25 | 367833R1 | 2 | SPRING |
| 26 | 177138C1 | 2 | ROD |
| 27 | 179024C1 | 2 | HINGE |
| 28 | 38-1816 | 2 | PIN, LOCK, 1/8″ x 1″, Slotted, 1/8″ x 1″, Slotted |
| 29 | 495-81175 | 4 | WASHER, 21/32″ x 1″ x .120″, 21/32 x 1 x 7/64 |
| 30 | 38-11616 | 2 | PIN, LOCK, 1/4″ x 1″, Slotted |
| 31 | 177141C1 | 2 | PIN |
| 32 | 1321735C3 | 2 | EYEBOLT |
| 33 | 329-108 | 4 | NUT, 1/2″-13, G8 |
| 34 | 439-5836 | 2 | PIN, HEADED, 1/2″ x 2 1/4″, 1/2 x 2-1/4 |
| 35 | 495-11053 | 2 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 36 | 432-1216 | 2 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 37 | 231-5145 | 16 | NUT, Flg, USR, 5/16″-18 |
| 38 | 1327737C2 | 2 | PLATE |
| 40 | 184853C1 | 1 | DEFLECTOR, Left Hand |
| 41 | 184854C1 | 1 | DEFLECTOR, Right Hand |
| 42 | 477-73112 | 16 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 43 | 1319474C1 | 1 | BAND |
| 44 | 1319479C1 | 1 | COVER |
| 45 | 409-7516 | 12 | BOLT, Hex Flg, 5/16″-18 x 1″, Serr |
| 46 | 495-11041 | 5 | WASHER, 3/8″, SAE, (13/32 x 13/16 x 1/16″) |
| 46 | 495-81135 | 7 | WASHER, 13/32″ x 1″ x .120″, 13/32 x 1 x 1/8 |
| 47 | 231-4115 | 5 | NUT, LOCK, 5/16″-18, GB |
| 47 | 231-5345 | 7 | NUT, LOCK, Flg, 5/16″-18, 5/16 |
| 48 | 1321640C1 | 2 | GROMMET |
| 49 | 1327752C1 | 1 | SEAL, Left Hand |
| 50 | 1327753C1 | 1 | SEAL, Right Hand |
| 51 | 109253A1 | 1 | PLATE, LARGE, Cut From 1330108CX |
| 52 | 140767A2 | 2 | HINGE |
| 53 | 140768A4 | 1 | STEP |
| 54 | 409-7812 | 2 | BOLT, Hex Flg, 1/2″-13 x 3/4″, Serr |
| 55 | 231-5148 | 2 | NUT, Flg, USR, 1/2″-13 |
| 57 | 87029779 | 2 | SEAL, 292 mm (11-1/2 in.), Cut From 1330108CX |
| 59 | 477-73808 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1/2″, 3/8 x 1/2 |
| 60 | 249827A1 | 4 | COVER |
| 61 | 425-106 | 4 | NUT, 3/8″-16, G5 |
| 62 | 396-41053 | 2 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN, 17/32 x 1-1/4 x 3/16 |
| 2 | 477-73820 | 8 | SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1 1/4″, 3/8 x 1-1/4 |
| 4 | 413-824 | 4 | BOLT, Hex, 1/2″-13 x 1 1/2″, G5, Full Thd, 1/2 x 1-1/2 |
| 5 | 635503R1 | 2 | SPRING |
| 6 | 167570C1 | 2 | CHAIN |
| 7 | 195-81030 | 4 | WASHER, 17/32 x 1-1/2 x 3/16 |
| 8 | 80679 | 4 | WASHER, LOCK, 1/2″ |
| 9 | 425-108 | 4 | NUT, 1/2″-13, G5 |
| 10 | 252124A1 | 1 | SUPPORT |
| 14 | 439-52092 | 2 | PIN, HEADED, 1 1/4″ x 5 3/4″, 1-1/4 x 5-3/4 |
| 16 | 243060A3 | 1 | STAND |
| 19 | 477-73820 | 8 | SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1 1/4″, 3/8 x 1-1/4 |
| 20 | 243058A3 | 1 | PIN |
| 21 | 432-812 | 3 | PIN, SPLIT (COTTER), 1/8″ x 3/4″ |
| 23 | 495-11041 | 1 | WASHER, 3/8″, SAE, (13/32 x 13/16 x 1/16″) |
| 24 | 231-5146 | 8 | NUT, Flg, USR, 3/8″-16 |
| 25 | 1327992C2 | 1 | GUARD, Feeder Sensor, See Figure 04-01 |
| 26 | 256873 | 2 | BOLT, Hex Flg, 5/16″-18 x 1/2″, Serr |
| 27 | 488837C1 | 2 | NUT, 5/16 |
| 28 | 415-820 | 8 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G8, Full Thd, 1/2 x 1-1/4; 8 |
| 2 | 242744A1 | 1 | DOOR, Lower |
| 3 | 1319963C1 | 1 | STRIP |
| 4 | 1319961C1 | 1 | SUPPORT |
| 5 | 1319965C1 | 1 | BAR |
| 6 | 197429C1 | 1 | STRIP |
| 7 | 443-11012 | 6 | SCREW, Cross Flat Hd, #10-24 x 3/4″, No. 10 x 3/4 |
| 8 | 196922C1 | 6 | NUT, No. 10 |
| 9 | 193364C2 | 1 | HINGE |
| 10 | 477-73812 | 6 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 11 | 231-5146 | 6 | NUT, Flg, USR, 3/8″-16 |
| 12 | 159012C1 | 1 | ROD |
| 13 | 131035A1 | 1 | COVER |
| 14 | 434-816 | 2 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1″, G5, Full Thd, 1/2 x 1 |
| 15 | 329-288 | 2 | NUT, Flg, 1/2″-13, G8 |
| 16 | 413-48 | 2 | BOLT, Hex, 1/4″-20 x 1/2″, G5, Full Thd, 1/4 x 1/2 |
| 17 | 1322144C2 | 2 | CLIP |
| 18 | 231-5144 | 2 | NUT, Flg, USR, 1/4″-20 |
| 19 | 409-7616 | 4 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 20 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 |
| 21 | 634204R2 | 1 | SEAL ASSY. |
| 22 | 138252A1 | 1 | FLAP, Upper |
| 24 | 197418C1 | 1 | SUPPORT |
| 25 | 175906C1 | 1 | ROD |
| 26 | 186355A1 | 1 | SHEET, Inc. 27, With 60 Inch Feeder |
| 26 | 186354A1 | 1 | SHEET, Inc. 27, With 54-1/2 Inch Feeder |
| 27 | D80270 | 1 | STRIP, Non-Slip, 635 mm (25 in) x 51 mm (2 in) |
| 28 | 415-824 | 8 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/2″, G8, 1/2 x 1-1/2; 8 |
| 30 | 425-148 | 8 | NUT, Jam, 1/2″-13, G5 |
| 30 | 329-288 | 8 | NUT, Flg, 1/2″-13, G8 |
| 31 | 1321504C1 | 1 | SCREW |
| 32 | 496-21081 | 4 | WASHER, 13/16″ x 1 1/2″ x .179″, HDN |
| 33 | 425-1012 | 3 | NUT, 3/4″-10, G5 |
| 34 | 138699A1 | 1 | LOCK |
| 35 | 130658A1 | 1 | SUPPORT |
| 36 | 477-73812 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 37 | 495-11041 | 2 | WASHER, 3/8″, SAE, (13/32 x 13/16 x 1/16″) |
| 38 | 492-11038 | 2 | WASHER, LOCK, 3/8″ |
| 39 | 425-106 | 2 | NUT, 3/8″-16, G5 |
| 40 | 1321638C1 | 1 | COVER |
| 41 | 425-148 | 8 | NUT, Jam, 1/2″-13, G5 |
| 42 | 139045A2 | 1 | SUPPORT |
| 1 | 117871A1 | 1 | CHAIN (AGRICULTURE), Conveyor Assy, Smooth Slats, Inc. 2 (12), 3, 4 & 5 (48 ea), 6 (2), With |
| 1 | 136439A1 | 1 | CHAIN (AGRICULTURE), Conveyor Assy, Smooth Slats, Inc. 2 (12), 3A, 4 & 5 (48 ea), 6 (2), Corn |
| 1 | 117865A1 | 1 | CHAIN (AGRICULTURE), Conveyor Assy, Serrated Slats , Inc. 2A (9), 3, 4 & 5 (36 ea), 6 (2), With |
| 1 | 136438A1 | 1 | CHAIN (AGRICULTURE), Conveyor Assy, Serrated Slats, Inc. 2A (10), 3A, 4 & 5 (40 ea), 6 (2), Corn |
| 3 | 107871A1 | 2 | CHAIN (AGRICULTURE), A557, With 54-1/2 Inch Feeder |
| 3 | 107928A1 | 2 | CHAIN (AGRICULTURE), , With 54-1/2 Inch Feeder |
| 9 | 176508C1 | 2 | BOLT |
| 10 | 425-1010 | 4 | NUT, 5/8″-11, G5 |
| 11 | 187218C2 | 2 | SCREW, 1/2 x 1-1/2; 8 |
| 12 | 425-1010 | 4 | NUT, 5/8″-11, G5 |
| 14 | 396-41066 | 6 | WASHER, 21/32″ x 1 1/2″ x .188″, HDN, 5/8 x 1-1/2 x 3/16 |
| 16 | 1330461C1 | 4 | FLANGE |
| 17 | 1306680C1 | 12 | NUT, LOCK, 3/8 |
| 18 | 557995R11 | 2 | COLLAR |
| 20 | 619738R91 | 2 | BEARING |
| 22 | 1957437C1 | 1 | DRUM, , Without Stone Retarder |
| 23 | 187207C2 | 1 | ROD |
| 24 | 1338287C3 | 1 | ARM, 3/8, With or Without Stone Retarder |
| 25 | 1338288C3 | 1 | ARM, Right Hand, Models With Smooth Slats, With or Without Stone Retarder |
| 26 | 1319875C5 | 1 | ARM, Left Hand, Models With Serrated Slats, With or Without Stone Retarder |
| 27 | 1319876C5 | 1 | ARM, Right Hand, Models With Serrated Slats, With or Without Stone Retarder |
| 31 | 179665C91 | 2 | BEARING, BALL |
| 33 | 178780C3 | 1 | SPACER, Left Hand |
| 34 | 178781C3 | 1 | SPACER, Right Hand |
| 35 | 1970248C1 | 2 | SPROCKET ASSY., 9T |
| 37 | 197643C1 | 4 | SCREW |
| 38 | 1320160C3 | 1 | SHAFT, No Longer Used, Order: 1320160C4, Ref. 38A |
| 39 | 432-2040 | 2 | PIN, SPLIT (COTTER), 5/16″ x 2 1/2″, 5/16″ x 2 1/2″, used with 1320160C3 |
| 44 | 185818C1 | 1 | STRIPPER ASSY., Left Hand |
| 45 | 185819C1 | 1 | STRIPPER ASSY., Right Hand |
| 46 | 477-73812 | 4 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 47 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 |
| 48 | 187347C1 | 2 | PLATE, , Without Stone Retarder |
| 50 | 1345418C2 | 2 | BRACKET |
| 51 | 433-1036 | 2 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 2 1/4″, G5, 5/8 x 2-1/4 |
| 52 | 425-1010 | 2 | NUT, 5/8″-11, G5 |
| 53 | 492-11062 | 2 | WASHER, LOCK, 5/8″ |
| 55 | 187225C1 | 2 | BAR, , With Stone Retarder |
| 57 | 187217C1 | 2 | SPACER, 7/8″ Tube x 1 13/16″ |
| 60 | 1957439C3 | 1 | DRUM, , With Stone Retarder |
| 61 | 112047A2 | 1 | PACKAGE, Inc. 62, Service Repair Only 1957439C3, With Stone Retarder |
| 62 | 112046A2 | 4 | STRIP, PROTECTION, Not Illustrated |
| 65 | 197211C1 | 2 | SPACER |
| 64 | 189709C1 | 2 | BOLT |
| 66 | 495-81162 | 2 | WASHER, 17/32″ x 1 1/2″ x .179″, 17/32 x 1-1/2 x 11/64 |
| 68 | 425-108 | 2 | NUT, 1/2″-13, G5 |
| 69 | 80679 | 2 | WASHER, LOCK, 1/2″ |
| 70 | 326-656 | 2 | BOLT, Hex, 3/8″-16 x 3 1/2″, G8 |
| 71 | 314148R1 | 2 | SPACER, 3/8″ X-Strng Pipe x .469″ |
| 72 | 231-1446 | 2 | NUT, LOCK, 3/8″-16, GB |
| 73 | 402485A1 | 1 | PIN, , ASN JJC0254000 |
| 1 | 241636A3 | 1 | HOUSING |
| 2 | 409-7516 | 6 | BOLT, Hex Flg, 5/16″-18 x 1″, Serr |
| 3 | 231-5145 | 22 | NUT, Flg, USR, 5/16″-18 |
| 4 | 1320279C1 | 1 | ANGLE |
| 5 | 477-73112 | 12 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 6 | 495-81135 | 6 | WASHER, 13/32″ x 1″ x .120″, 13/32 x 1 x 7/64 |
| 7 | 179665C91 | 2 | BEARING, BALL |
| 8 | 1327925C4 | 1 | COVER ASSY |
| 9 | 409-7612 | 4 | BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr |
| 10 | 1320254C1 | 2 | PLATE |
| 12 | 195202C1 | 2 | SEAL |
| 13 | 231-5146 | 16 | NUT, Flg, USR, 3/8″-16 |
| 14 | 409-7616 | 7 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 15 | 326-16128 | 2 | BOLT, Hex, 1″-8 x 8″, G8 |
| 16 | 232-41316 | 2 | NUT, LOCK, 1″-8, GC |
| 17 | 495-11106 | 10 | WASHER, 1″, SAE, (1-1/16 x 2 x 1/8″) |
| 19 | 1320154C1 | 1 | HINGE |
| 20 | 1320149C1 | 1 | ROD |
| 21 | 1324880C2 | 1 | ANGLE |
| 22 | 1319834C2 | 1 | DRUM |
| 23 | 1324438C1 | 3 | KNIFE |
| 24 | 434-624 | 15 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/2″, G5, 3/8 x 1-1/2 |
| 25 | 425-106 | 15 | NUT, 3/8″-16, G5 |
| 26 | 492-11038 | 15 | WASHER, LOCK, 3/8″ |
| 27 | 1327502C1 | 1 | SHAFT |
| 28 | 477-73812 | 5 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 29 | 231-5145 | 5 | NUT, Flg, USR, 5/16″-18 |
| 30 | 432-2040 | 2 | PIN, SPLIT (COTTER), 5/16″ x 2 1/2″, 5/16″ x 2 1/2″ |
| 35 | 1320268C1 | 1 | SPACER, Left Hand |
| 36 | 1320269C1 | 1 | SPACER, Right Hand |
| 37 | 162172C1 | 1 | SPACER, 1-13/16 x 2-1/4 x 1-15/16 |
| 40 | 241653A1 | 1 | STEM, Door Latch |
| 41 | 131950A1 | 2 | STEM |
| 42 | 131964A1 | 2 | TUBE, Pivot |
| 43 | 432-1224 | 2 | PIN, SPLIT (COTTER), 3/16″ x 1 1/2″ |
| 44 | 231-4146 | 2 | NUT, LOCK, 3/8″-16, GB |
| 45 | 425-106 | 2 | NUT, 3/8″-16, G5 |
| 46 | 1320846C1 | 1 | SUPPORT ASSY. |
| 47 | 283483A1 | 1 | GRIP |
| 1 | 389727A1 | 1 | HOUSING |
| 2 | 241653A1 | 1 | STEM, Door Latch |
| 3 | 231-5145 | 16 | NUT, Flg, USR, 5/16″-18 |
| 4 | 1320279C1 | 1 | ANGLE |
| 5 | 477-73112 | 12 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 6 | 389705A1 | 1 | SPACER, 1-13/16 x 2-1/4 x 3-5/64 |
| 7 | 179665C91 | 2 | BEARING, BALL |
| 8 | 390631A1 | 1 | SPACER, Left Hand |
| 9 | 390632A1 | 1 | SPACER, Right Hand |
| 10 | 1320254C1 | 2 | PLATE |
| 12 | 195202C1 | 2 | SEAL |
| 13 | 131950A1 | 2 | STEM |
| 14 | 131964A1 | 2 | TUBE, Pivot |
| 15 | 432-1224 | 2 | PIN, SPLIT (COTTER), 3/16″ x 1 1/2″ |
| 16 | 231-4146 | 2 | NUT, LOCK, 3/8″-16, GB |
| 17 | 425-106 | 2 | NUT, 3/8″-16, G5 |
| 19 | 1320154C1 | 1 | HINGE |
| 20 | 1320149C1 | 1 | ROD |
| 21 | 1324880C2 | 1 | ANGLE |
| 22 | 1319834C2 | 1 | DRUM |
| 23 | 1324438C1 | 3 | KNIFE |
| 24 | 434-624 | 15 | BOLT, CARRIAGE, Short NK, 3/8″-16 x 1 1/2″, G5, 3/8 x 1-1/2 |
| 25 | 425-106 | 15 | NUT, 3/8″-16, G5 |
| 26 | 492-11038 | 15 | WASHER, LOCK, 3/8″ |
| 27 | 389021A1 | 1 | BAR |
| 28 | 477-73812 | 5 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 29 | 231-5146 | 5 | NUT, Flg, USR, 3/8″-16 |
| 30 | 432-2040 | 2 | PIN, SPLIT (COTTER), 5/16″ x 2 1/2″, 5/16″ x 2 1/2″ |
| 31 | 495-81093 | 2 | WASHER, 1 25/32″ x 2 1/2″ x .120″, 1-3/4 x 2-1/2 x 1/8 |
| 32 | 495-81093 | 1 | WASHER, 1 25/32″ x 2 1/2″ x .120″, 1-3/4 x 2-1/2 x 1/8 |
| 35 | 1327925C4 | 1 | COVER ASSY |
| 36 | 409-7612 | 4 | BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr |
| 37 | 495-81135 | 6 | WASHER, 13/32″ x 1″ x .120″, 13/32 x 1 x 7/64 |
| 40 | 409-7516 | 7 | BOLT, Hex Flg, 5/16″-18 x 1″, Serr |
| 41 | 231-5146 | 14 | NUT, Flg, USR, 3/8″-16 |
| 41 | 1306680C1 | 4 | NUT, LOCK, 3/8 |
| 42 | 409-7616 | 4 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 42 | 409-7620 | 6 | BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr |
| 43 | 326-16104 | 2 | BOLT, Hex, 1″-8 x 6 1/2″, G8 |
| 44 | 231-42116 | 2 | NUT, LOCK, 1″-8, GB, 1 in. |
| 45 | 495-11106 | 10 | WASHER, 1″, SAE, (1-1/16 x 2 x 1/8″) |
| 46 | 1320846C1 | 1 | SUPPORT ASSY. |
| 47 | 283483A1 | 1 | GRIP |
| 48 | 389588A1 | 1 | BEARING ASSY |
| 49 | 409-7824 | 4 | BOLT, Hex Flg, 1/2″-13 x 1 1/2″, Serr, 1/2 x 1-1/2 |
| 50 | 231-5148 | 4 | NUT, Flg, USR, 1/2″-13 |
| 1 | 245927C93 | 1 | MOTOR, STARTER, Feeder Reverser, See Figure 04-42 |
| 2 | 180358 | 2 | WASHER, LOCK, Int Tooth, 3/8″, Hvy |
| 3 | 329-286 | 2 | NUT, Flg, 3/8″-16, G8 |
| 5 | 597537R91 | 2 | BEARING, BALL |
| 6 | 1321523C1 | 1 | SPACER |
| 7 | 219-87 | 3 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 8 | 100-21315 | 2 | RING, SNAP, 3.156″, Int, #315 |
| 9 | 896-16036 | 1 | WASHER, M39 x 78.5 x 7, HT, 39 x 78 x 7 mm |
| 10 | 38-33248 | 1 | PIN, 1/2″ x 3″, Coiled, 1/2″ x 3″, Coiled |
| 11 | 1321534C1 | 1 | SHAFT |
| 13 | 409-7624 | 2 | BOLT, Hex Flg, 3/8″-16 x 1 1/2″, Serr |
| 14 | 1321537C92 | 1 | PINION |
| 15 | 1329717C1 | 1 | SPROCKET, 20T |
| 16 | 495-91167 | 2 | WASHER, 17/32″ x 2″ x .120″, 17/32 x 2 x 7/64 |
| 17 | 409-7816 | 1 | BOLT, Hex Flg, 1/2″-13 x 1″, Serr, 1/2 x 1 |
| 18 | 1329719C2 | 1 | SPROCKET, 20T |
| 18 | 125407A1 | 1 | SPROCKET, 30T |
| 19 | 432-2040 | 2 | PIN, SPLIT (COTTER), 5/16″ x 2 1/2″, 5/16″ x 2 1/2″ |
| 20 | 425-1012 | 1 | NUT, 3/4″-10, G5 |
| 21 | 492-11075 | 1 | WASHER, LOCK, 3/4″, 3/4″ |
| 22 | 496-31081 | 2 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, 13/16 x 1-1/2 x 7/32 |
| 23 | 1327991C1 | 2 | BUSHING |
| 24 | 1321531C93 | 1 | SPROCKET, Inc. 25 |
| 25 | 630836C91 | 2 | BEARING, NEEDLE, 1-19/64 OD |
| 26 | 1327990C1 | 1 | BOLT, Hex, 3/4″-10 x 4, Drilled |
| 27 | 1321529C95 | 1 | CHAIN, 118 links, 88-1/2 in. |
| 28 | 1321528C2 | 1 | SUPPORT |
| 30 | 1321933C3 | 1 | SUPPORT |
| 32 | 413-1060 | 1 | BOLT, Hex, 5/8″-11 x 3 3/4″, G5, 5/8 x 3-3/4 |
| 33 | 1330032C1 | 1 | SPRING |
| 34 | 187217C1 | 1 | SPACER, 7/8″ Tube x 1 13/16″ |
| 35 | 541857R92 | 1 | SPROCKET, 15T |
| 36 | 413-1072 | 1 | BOLT, Hex, 5/8″-11 x 4 1/2″, G5 |
| 37 | 1329720C2 | 1 | SPROCKET, 40T |
| 38 | 409-7620 | 4 | BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr |
| 40 | 130413A8 | 1 | SHIELD |
| 42 | 138181A2 | 1 | GUARD, Lower |
| 43 | 409-7616 | 6 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 44 | 231-5146 | 6 | NUT, Flg, USR, 3/8″-16 |
| 45 | 138182A1 | 1 | GUARD, Upper |
| 46 | 409-7512 | 2 | BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr |
| 47 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 48 | 138185A3 | 1 | SUPPORT, Upper |
| 49 | 61851V | 1 | SPACER, 1/4″ Pipe x 3/4″ |
| 50 | 409-7520 | 1 | BOLT, Hex Flg, 5/16″-18 x 1 1/4″, Serr, 5/16 x 1-1/4 |
| 51 | 231-5145 | 1 | NUT, Flg, USR, 5/16″-18 |
| 52 | 142515A1 | 1 | SUPPORT, Lower Front |
| 53 | 138699A1 | 1 | LOCK |
| 53 | 135476A1 | 1 | LOCK, Australia Only |
| 54 | 132686A3 | 1 | SUPPORT, Upper Rear |
| 55 | 132657A2 | 1 | CABLE |
| 56 | 413-416 | 2 | BOLT, Hex, 1/4″-20 x 1″, G5 |
| 57 | 231-5144 | 4 | NUT, Flg, USR, 1/4″-20 |
| 58 | 160638C2 | 1 | HANDLE |
| 59 | 477-73108 | 2 | SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1/2″, 5/16 x 1/2 |
| 60 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 1 | 390744A2 | 1 | SUPPORT |
| 2 | 413-820 | 3 | BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 3 | 231-5148 | 3 | NUT, Flg, USR, 1/2″-13 |
| 4 | 390737A1 | 1 | ARM, Includes: Ref. 5 |
| 5 | 1280291C1 | 2 | BUSHING, 19 mm (3/4 in.) dia. |
| 6 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 7 | 390822A1 | 1 | BUSHING |
| 8 | 413-864 | 1 | BOLT, Hex, 1/2″-13 x 4″, G5, 1/2 x 4 |
| 9 | 231-5148 | 1 | NUT, Flg, USR, 1/2″-13 |
| 10 | 439-11044 | 1 | PIN, HEADED, 5/8″ x 2 3/4″, G2 |
| 11 | 396-41066 | 9 | WASHER, 21/32″ x 1 1/2″ x .188″, HDN, 21/32 x 1-1/2 x 3/16 |
| 12 | 496-21066 | 2 | WASHER, 21/32″ x 1 5/16″ x .150″ |
| 13 | 432-1220 | 1 | PIN, SPLIT (COTTER), 3/16″ x 1 1/4″ |
| 15 | 425-1512 | 1 | NUT, Jam, 3/4″-10, G5, 3/4 NF |
| 18 | 1329719C2 | 1 | SPROCKET, Beater Driven, 20T |
| 18 | 125407A1 | 1 | SPROCKET, Beater Driven, 30T |
| 19 | 432-2040 | 2 | PIN, SPLIT (COTTER), 5/16″ x 2 1/2″, 5/16″ x 2 1/2″ |
| 20 | 390871A1 | 1 | EYEBOLT, 5/8 |
| 21 | 390870A1 | 1 | PIVOT |
| 22 | 495-81030 | 2 | WASHER, 21/32″ x 2″ x .179″, 21/32 x 2 x 11/64 |
| 23 | 394120A1 | 2 | WASHER |
| 24 | 390869A1 | 1 | SPACER |
| 25 | 390872A1 | 1 | SPRING |
| 26 | 425-1010 | 1 | NUT, 5/8″-11, G5 |
| 27 | 390967A1 | 1 | CHAIN, 66 Links, 49-1/2 in. |
| 28 | 394014A1 | 1 | BRACKET |
| 29 | 232-41110 | 1 | NUT, LOCK, 5/8″-11, GC |
| 30 | 413-1052 | 1 | BOLT, Hex, 5/8″-11 x 3 1/4″, G5, 5/8 x 3-1/4 |
| 31 | 495-11066 | 4 | WASHER, 5/8″, SAE, 21/32 x 1-5/16 x 3/32 |
| 32 | 132657A2 | 1 | CABLE |
| 33 | 413-416 | 2 | BOLT, Hex, 1/4″-20 x 1″, G5 |
| 34 | 231-5144 | 4 | NUT, Flg, USR, 1/4″-20 |
| 35 | 541857R92 | 1 | SPROCKET, Idler, 15T |
| 36 | 584608R1 | 1 | SPACER, 86 mm (3-3/8 in.) |
| 37 | 1329720C2 | 1 | SPROCKET, Driven, 40T |
| 38 | 432-2440 | 1 | PIN, SPLIT (COTTER), 3/8″ x 2 1/2″, 3/8″ x 2 1/2″ |
| 39 | 132685A2 | 1 | SUPPORT |
| 40 | 391651A1 | 1 | SHIELD, Feeder Reverser |
| 42 | 391656A1 | 1 | SHIELD, Lower |
| 43 | 409-7616 | 4 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 44 | 231-5146 | 4 | NUT, Flg, USR, 3/8″-16 |
| 45 | 405570A1 | 1 | SHIELD, Upper, Includes Decal, See Figure 09H-21, Ref. 9 |
| 46 | 409-7512 | 1 | BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr |
| 47 | 231-5145 | 1 | NUT, Flg, USR, 5/16″-18 |
| 48 | 138185A3 | 1 | SUPPORT, Upper |
| 49 | 61851V | 1 | SPACER, 1/4″ Pipe x 3/4″ |
| 50 | 409-7520 | 1 | BOLT, Hex Flg, 5/16″-18 x 1 1/4″, Serr, 5/16 x 1-1/4 |
| 51 | 231-5145 | 1 | NUT, Flg, USR, 5/16″-18 |
| 52 | 391658A1 | 1 | BRACKET, Lower Front |
| 53 | 138699A1 | 1 | LOCK |
| 53 | 135476A1 | 1 | LOCK, Australia Only |
| 54 | 160638C2 | 1 | HANDLE |
| 55 | 477-73108 | 2 | SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1/2″, 5/16 x 1/2 |
| 56 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 58 | 409-7520 | 1 | BOLT, Hex Flg, 5/16″-18 x 1 1/4″, Serr, 5/16 x 1-1/4 |
| 59 | 231-5145 | 1 | NUT, Flg, USR, 5/16″-18 |
| 60 | 394276A1 | 1 | SHIELD |
| 61 | 434-512 | 1 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 3/4″, G5, Full Thd |
| 1 | 245927C93 | 1 | MOTOR, STARTER, Feeder Reverser, See Figure 4-42 |
| 2 | 180358 | 2 | WASHER, LOCK, Int Tooth, 3/8″, Hvy |
| 3 | 329-286 | 2 | NUT, Flg, 3/8″-16, G8 |
| 5 | 597537R91 | 2 | BEARING, BALL |
| 6 | 1321523C1 | 1 | SPACER |
| 7 | 219-87 | 1 | NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap |
| 8 | 100-21315 | 2 | RING, SNAP, 3.156″, Int, #315 |
| 9 | 896-16036 | 1 | WASHER, M39 x 78.5 x 7, HT, 39 x 78 x 7 mm |
| 10 | 38-33248 | 1 | PIN, 1/2″ x 3″, Coiled, 1/2″ x 3″, Coiled |
| 11 | 1321534C1 | 1 | SHAFT |
| 13 | 409-7624 | 2 | BOLT, Hex Flg, 3/8″-16 x 1 1/2″, Serr |
| 14 | 1321537C92 | 1 | PINION |
| 15 | 1329717C1 | 1 | SPROCKET, 20T |
| 16 | 495-91167 | 2 | WASHER, 17/32″ x 2″ x .120″, 17/32 x 2 x 7/64 |
| 17 | 409-7816 | 1 | BOLT, Hex Flg, 1/2″-13 x 1″, Serr, 1/2 x 1 |
| 18 | 1329720C2 | 1 | SPROCKET, 40T |
| 19 | 432-2040 | 1 | PIN, SPLIT (COTTER), 5/16″ x 2 1/2″, 5/16″ x 2 1/2″ |
| 20 | 1321524C94 | 1 | CHAIN, 57 in., 76 Links |
| 21 | 126240A8 | 1 | SHIELD |
| 23 | 132683A2 | 1 | SUPPORT, Lower Front |
| 24 | 409-7616 | 6 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 25 | 231-5146 | 9 | NUT, Flg, USR, 3/8″-16 |
| 26 | 186266A2 | 1 | SUPPORT |
| 27 | 138699A1 | 1 | LOCK |
| 27 | 135476A1 | 1 | LOCK, Australia Only |
| 28 | 132685A2 | 1 | SUPPORT, Upper Front |
| 29 | 132686A3 | 1 | SUPPORT, Upper Rear |
| 30 | 132657A2 | 1 | CABLE |
| 31 | 413-416 | 2 | BOLT, Hex, 1/4″-20 x 1″, G5 |
| 32 | 231-5144 | 4 | NUT, Flg, USR, 1/4″-20 |
| 33 | 160638C2 | 1 | HANDLE |
| 34 | 477-73108 | 2 | SCREW, Sltd Serr Truss Hd, 5/16″-18 x 1/2″, 5/16 x 1/2 |
| 35 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 1 | 86980131 | 1 | GEARBOX, See Figure 09A-29 |
| 2 | 405720A1 | 1 | SUPPORT |
| 3 | 388772A1 | 1 | BRACKET |
| 4 | 388773A1 | 1 | BRACKET |
| 5 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 6 | 382543A1 | 1 | CYLINDER, CLUTCH |
| 7 | 391768A1 | 1 | ROD |
| 8 | 439-1656 | 1 | PIN, HEADED, 3/8″ x 3 1/2″, 3/8 x 3-1/2; 2 |
| 9 | 439-5624 | 1 | PIN, HEADED, 3/8″ x 1 1/2″, 3/8 x 1-1/2; 5 |
| 10 | 432-812 | 2 | PIN, SPLIT (COTTER), 1/8″ x 3/4″ |
| 11 | 409-7816 | 2 | BOLT, Hex Flg, 1/2″-13 x 1″, Serr, 1/2 x 1 |
| 12 | 242-1410 | 1 | LINK, CHAIN |
| 13 | 405718A1 | 1 | SUPPORT |
| 14 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 15 | 361-45024 | 2 | SCREW, Hex Soc Flat Hd, 1/2″-13 x 1 1/2″, 1/2 x 1-1/2 |
| 16 | 231-5148 | 2 | NUT, Flg, USR, 1/2″-13 |
| 17 | 434-820 | 1 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 1 | 681631 | 1 | HOUSING, Inc. 2 |
| 2 | 64780 | 2 | DOWEL, 1/4 x 1/2 |
| 3 | 413-632 | 7 | BOLT, Hex, 3/8″-16 x 2″, G5 |
| 4 | 425-1312 | 1 | NUT, SLOTTED, 3/4″-16, G5, 3/4 NF |
| 5 | 432-824 | 1 | PIN, SPLIT (COTTER), 1/8″ x 1 1/2″ |
| 6 | 100-21244 | 1 | RING, SNAP, 2.44″, Int, #244 |
| 7 | 95-81051 | 1 | WASHER, 25/32″ x 1 1/4″ x .134″, 25/32 x 1-1/4 x 1/8 |
| 8 | 86548977 | 1 | BEARING, BALL |
| 9 | 144929 | 1 | SPACER |
| 10 | 132709 | 2 | BEARING, CUP |
| 11 | 132710 | 2 | BEARING, ROLLER |
| 12 | 685097 | 1 | RING, SNAP |
| 13 | 681639 | 1 | SHAFT |
| 14 | 681629 | 1 | GEAR, 16T |
| 15 | 681637 | 1 | CLUTCH |
| 16 | 646518 | 1 | SPRING |
| 17 | 26224 | 2 | WASHER, 1-25/32 x 2-1/2 x 0.060 in. |
| 18 | 704377 | 1 | WASHER, 1-25/32 x 3-5/16 x 3/16 in. |
| 19 | 50519 | 1 | WASHER, 1.58 x 2-1/4 x 0.060 in. |
| 20 | 112041R91 | 1 | BEARING, BALL |
| 21 | 37184 | 1 | RING, SNAP |
| 22 | 495-11053 | 3 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 23 | 163024 | 2 | SEAL |
| 24 | 681902 | 1 | SPRING |
| 25 | 435-5616 | 2 | PIN, GROOVED, 3/16″ x 1″, Type E |
| 26 | 681650 | 1 | ROD |
| 27 | 572820 | 1 | SCREW, VENTING |
| 28 | 444030 | 1 | REDUCER, 1/2″-14 NPTF x 1/8″-27 Fem NPTF |
| 29 | 217-465 | 2 | PLUG, DRAIN, Hex Soc, 1/2″-14, NPTF |
| 30 | 425-106 | 9 | NUT, 3/8″-16, G5 |
| 31 | 492-11038 | 7 | WASHER, LOCK, 3/8″ |
| 32 | 86980130 | 1 | HOUSING |
| 33 | 42447 | 1 | RING, SNAP |
| 35 | 781754 | 2 | RING |
| 36 | 681627 | 1 | GEAR, 32T |
| 37 | 113-250 | 2 | BOLT, Hex, 3/8″-16 x 2 1/2″, G5, Full Thd |
| 1 | 188073A2 | 1 | FRAME, , BSN JJC0253999 |
| 1 | 188073A3 | 1 | FRAME ASSY, , BTW JJC0254000 & JJC0254999 |
| 1 | 188073A4 | 1 | FRAME ASSY, , ASN JJC0255000 |
| 2 | 433-1032 | 4 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 2″, G5, 5/8 x 2 |
| 3 | 238369A1 | 1 | STOP, Right Hand |
| 3 | 238370A1 | 1 | STOP, Left Hand |
| 4 | 433-1032 | 2 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 2″, G5, 5/8 x 2 |
| 5 | 492-11062 | 2 | WASHER, LOCK, 5/8″ |
| 6 | 425-1010 | 2 | NUT, 5/8″-11, G5 |
| 7 | 100487A1 | 2 | LINK |
| 8 | 1324294C1 | 2 | LINK, CONNECTING, A557 |
| 9 | 1329837C2 | 6 | PIN |
| 2 | 100274A1 | 1 | SUPPORT |
| 3 | 151-559 | 13 | RIVET, Pop, 3/16″ x .700″ |
| 4 | 100273A1 | 2 | SUPPORT |
| 5 | 140767A2 | 2 | HINGE |
| 6 | 140768A4 | 1 | STEP |
| 7 | 477-73812 | 8 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 8 | 231-5146 | 8 | NUT, Flg, USR, 3/8″-16 |
| 9 | 100287A1 | 2 | STOP |
| 10 | 413-828 | 4 | BOLT, Hex, 1/2″-13 x 1 3/4″, G5 |
| 11 | 231-4218 | 4 | NUT, LOCK, 1/2″-13, GB, 1/2 |
| 12 | 108739A1 | 2 | SEAL |
| 13 | 281-5488 | 6 | SCREW, SELF TAPPING, Hex Wash Hd, 5/16″-18 x 1/2″, 5/16 x 1/2 |
| 14 | 495-21038 | 6 | WASHER, 5/16″, 3/8 x 7/8 x 3/32 |
| 15 | 108740A1 | 2 | SEAL |
| 16 | 108645A2 | 2 | STRIP, 300 mm (11-13/16 in.) |
| 16 | 226606A2 | 2 | STRIP, 210 mm (8-1/4 in) |
| 17 | 144934A1 | 2 | GUARD |
| 18 | 144935A2 | 2 | STRAP, 370 mm (14-9/16 in.) |
| 19 | 390747A1 | 26 | RIVET, 3/16 x 0.78 in. |
| 20 | 100295A1 | 2 | HANDLE |
| 21 | 411-572 | 2 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 4 1/2″, G2, 5/16 x 4-1/2; 2 |
| 22 | 492-11031 | 2 | WASHER, LOCK, 5/16″ |
| 23 | 425-105 | 2 | NUT, 5/16″-18, G5 |
| 24 | 100478A1 | 2 | PLATE, LARGE |
| 25 | 434-512 | 8 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 3/4″, G5, Full Thd |
| 26 | 495-21038 | 8 | WASHER, 5/16″, 3/8 x 7/8 x 3/32 |
| 27 | 492-11031 | 8 | WASHER, LOCK, 5/16″ |
| 28 | 425-105 | 8 | NUT, 5/16″-18, G5 |
| 29 | 126046A1 | 2 | GASKET, 292 mm (11-1/2 in.), Cut From 1330108CX |
| 30 | 177141C1 | 2 | PIN |
| 31 | 495-81175 | 2 | WASHER, 21/32″ x 1″ x .120″, 21/32 x 1 x 7/64 |
| 32 | 38-11616 | 2 | PIN, LOCK, 1/4″ x 1″, Slotted |
| 33 | 1338021C1 | 2 | PIN |
| 34 | 240586A2 | 1 | SUPPORT |
| 35 | 240587A1 | 1 | SUPPORT |
| 36 | 413-1680 | 1 | BOLT, Hex, 1″-8 x 5″, G5, 1 x 5 |
| 37 | 232-53116 | 1 | NUT, LOCK, Flg, 1″-8 |
| 38 | 240613A2 | 1 | SPACER |
| 39 | 936727R1 | 2 | WASHER, 1-1/32 x 2-1/4 x 1/4 |
| 40 | 434-820 | 4 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 41 | 433-872 | 4 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 4 1/2″, G5, 3/8 |
| 42 | 231-5148 | 8 | NUT, Flg, USR, 1/2″-13 |
| 2 | 100274A1 | 1 | SUPPORT |
| 3 | 151-559 | 13 | RIVET, Pop, 3/16″ x .700″ |
| 4 | 350017A1 | 2 | SLIDE, Horizontal |
| 5 | 350018A1 | 2 | SLIDE, Vertical |
| 6 | 461-7258 | 6 | SCREW, Hex Soc But Hd, 1/4″-20 x 1/2″, 1/4 x 1/2 |
| 7 | 231-5144 | 6 | NUT, Flg, USR, 1/4″-20 |
| 8 | 419289A1 | 6 | RIVET, 1/4 x 21/32 |
| 9 | 100287A1 | 2 | STOP |
| 10 | 413-828 | 4 | BOLT, Hex, 1/2″-13 x 1 3/4″, G5 |
| 11 | 231-4218 | 4 | NUT, LOCK, 1/2″-13, GB, 1/2 |
| 12 | 108739A1 | 2 | SEAL |
| 13 | 281-5488 | 6 | SCREW, SELF TAPPING, Hex Wash Hd, 5/16″-18 x 1/2″, 5/16 x 1/2 |
| 14 | 495-11041 | 6 | WASHER, 3/8″, SAE, (13/32 x 13/16 x 1/16″) |
| 15 | 108740A1 | 2 | SEAL |
| 16 | 108645A2 | 2 | STRIP, 300 mm (11-13/16 in.) |
| 16 | 226606A2 | 2 | STRIP, 210 mm (8-1/4 in) |
| 17 | 144934A1 | 2 | GUARD |
| 18 | 144935A2 | 2 | STRAP, 370 mm (14-9/16 in.) |
| 19 | 390747A1 | 26 | RIVET, 3/16 x 0.78 in. |
| 20 | 100295A1 | 2 | HANDLE |
| 21 | 411-572 | 2 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 4 1/2″, G2, 5/16 x 4-1/2; 2 |
| 22 | 492-11031 | 2 | WASHER, LOCK, 5/16″ |
| 23 | 425-105 | 2 | NUT, 5/16″-18, G5 |
| 24 | 87029779 | 2 | SEAL, 292 mm (11-1/2 in.), Cut From 1330108CX |
| 25 | 177141C1 | 2 | PIN |
| 26 | 495-81175 | 4 | WASHER, 21/32″ x 1″ x .120″, 21/32 x 1 x 7/64 |
| 27 | 38-11616 | 2 | PIN, LOCK, 1/4″ x 1″, Slotted |
| 28 | 1338021C1 | 2 | PIN |
| 29 | 240586A2 | 1 | SUPPORT |
| 30 | 240587A1 | 1 | SUPPORT |
| 31 | 413-1680 | 1 | BOLT, Hex, 1″-8 x 5″, G5, 1 x 5 |
| 32 | 232-53116 | 1 | NUT, LOCK, Flg, 1″-8 |
| 33 | 936727R1 | 2 | WASHER, 1-1/32 x 2-1/4 x 1/4 |
| 34 | 240613A2 | 1 | SPACER |
| 35 | 434-820 | 4 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 36 | 433-872 | 4 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 4 1/2″, G5, 1/2 x 4-1/2 |
| 37 | 231-5148 | 8 | NUT, Flg, USR, 1/2″-13 |
| 38 | 140767A2 | 2 | HINGE |
| 39 | 140768A4 | 1 | STEP |
| 40 | 477-73812 | 8 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 41 | 231-5146 | 8 | NUT, Flg, USR, 3/8″-16 |
| 42 | 100478A1 | 2 | PLATE, LARGE |
| 43 | 434-512 | 8 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 3/4″, G5, Full Thd |
| 44 | 495-11041 | 8 | WASHER, 3/8″, SAE, (13/32 x 13/16 x 1/16″) |
| 45 | 492-11031 | 8 | WASHER, LOCK, 5/16″ |
| 46 | 425-105 | 8 | NUT, 5/16″-18, G5 |
| 47 | 87409088 | 1 | DEFLECTOR, Plate, Feeder House |
| 1 | 1315340C4 | 1 | HOUSING, See Figure 09B-04 |
| 2 | 1338395C1 | 1 | SUPPORT ASSY. |
| 3 | 434-820 | 4 | BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 4 | 409-7820 | 2 | BOLT, Hex Flg, 1/2″-13 x 1 1/4″, Serr |
| 5 | 231-5148 | 6 | NUT, Flg, USR, 1/2″-13 |
| 6 | 413-616 | 4 | BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd |
| 7 | 492-11038 | 4 | WASHER, LOCK, 3/8″ |
| 8 | 188141C1 | 1 | SUPPORT |
| 9 | 181314C2 | 2 | BLOCK |
| 10 | 181315C1 | 1 | PLATE |
| 11 | 413-824 | 4 | BOLT, Hex, 1/2″-13 x 1 1/2″, G5, Full Thd, 1/2 x 1-1/2 |
| 12 | 80679 | 4 | WASHER, LOCK, 1/2″ |
| 13 | 495-81030 | 2 | WASHER, 21/32″ x 2″ x .179″, 21/32 x 2 x 11/64 |
| 14 | 425-1010 | 2 | NUT, 5/8″-11, G5 |
| 15 | 217-348 | 1 | FITTING, 90є, 1/2″ Hose x 3/4″-16 ORB Beaded, Replaces 188272C1 |
| 16 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 17 | 282906A1 | 1 | STRAP |
| 18 | 413-1244 | 2 | BOLT, Hex, 3/4″-10 x 2 3/4″, G5, 3/4 x 2-3/4 |
| 19 | 439-5832 | 1 | PIN, HEADED, 1/2″ x 2″, 1/2 x 2 |
| 20 | 432-1216 | 1 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 21 | 188143C1 | 1 | EYEBOLT |
| 22 | 163493C1 | 1 | STRIP, 3/4 ID x 1-3/4 |
| 24 | 238-5210 | 2 | O-RING, -210, 70 Duro, .734″ ID x .139″ Thk |
| 25 | 477-73112 | 2 | BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″ |
| 26 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 27 | 193946C1 | 1 | TUBE |
| 28 | 214-1706 | 2 | CLAMP, HOSE, #6, 0.44/0.78 Type M Worm |
| 29 | 194043C1 | 1 | HOSE, 483 mm (19-1/8 in.), Cut From S118466X |
| 30 | 100398A1 | 1 | LEVER ASSY. |
| 31 | 100395A1 | 1 | SUPPORT |
| 32 | 413-620 | 1 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd |
| 33 | 495-21044 | 1 | WASHER, 3/8″, 7/16 x 1 x 5/64 |
| 34 | 1979265C1 | 1 | BUSHING |
| 35 | 1979327C1 | 1 | SPACER |
| 36 | 231-4116 | 1 | NUT, LOCK, 3/8″-16, GB, 3/8 |
| 37 | 413-512 | 2 | BOLT, Hex, 5/16″-18 x 3/4″, G5, Full Thd |
| 38 | 492-11031 | 4 | WASHER, LOCK, 5/16″ |
| 39 | 439-5521 | 2 | PIN, HEADED, 5/16″ x 1 5/16″, 5/16 x 1-5/16 |
| 40 | 432-812 | 2 | PIN, SPLIT (COTTER), 1/8″ x 3/4″ |
| 41 | 432-1216 | 2 | PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″ |
| 42 | 495-11034 | 1 | WASHER, 5/16″, SAE, (11/32 x 11/16 x 1/16″) |
| 43 | 186648C2 | 1 | ROD |
| 44 | 396-41053 | 2 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN, 17/32 x 1-1/4 x 3/16 |
| 45 | 1979564C1 | 1 | SUPPORT |
| 46 | 87107420 | 2 | GROMMET, 5/8 ID |
| 47 | 413-820 | 2 | BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd, 1/2 x 1-1/4 |
| 48 | 231-5148 | 2 | NUT, Flg, USR, 1/2″-13 |
| 1 | 1315340C4 | 1 | HOUSING, GEAR, See Figure 09B-04 |
| 2 | 194058C1 | 1 | SUPPORT |
| 3 | 413-828 | 4 | BOLT, Hex, 1/2″-13 x 1 3/4″, G5 |
| 4 | 80679 | 4 | WASHER, LOCK, 1/2″ |
| 5 | 194077C1 | 2 | SPACER |
| 6 | 413-848 | 2 | BOLT, Hex, 1/2″-13 x 3″, G5 |
| 7 | 396-41053 | 2 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN, 17/32 x 1-1/4 x 3/16 |
| 8 | 184489C1 | 1 | HUB, Machine Forged |
| 9 | 280508A1 | 1 | PULLEY, Fixed, Used With 1315294C7, Ref. 12 |
| 10 | 310-1824 | 12 | BOLT, Locking, 1/2″-13 x 1 1/2″, G8, 1/2 x 1-1/2; 8 |
| 11 | 244420A1 | 1 | BELT, 85 in. ov cntr, BSN JJC0254999 |
| 11 | 244420A3 | 1 | BELT, Seamless, ASN JJC0255000 |
| 12 | 1315294C7 | 1 | PULLEY, Adjustable, Inc. 13 – 16, Used with 280508A1, Ref. 9 |
| 13 | 193965C92 | 3 | SEAL |
| 15 | 537602R1 | 1 | RING |
| 16 | 219-17 | 1 | NIPPLE, LUBE, 3/16″ x .55″ lg, Drive |
| 17 | 1315521C1 | 1 | STOP |
| 18 | 184486C2 | 1 | SPRING, 400# |
| 19 | 1315344C2 | 1 | HUB |
| 20 | 1315343C1 | 2 | BEARING |
| 21 | 425-1110 | 2 | NUT, 5/8″-18, G5 |
| 22 | 194167C1 | 2 | SCREW |
| 24 | 193941C1 | 2 | BUSHING |
| 25 | 1315297C2 | 1 | HUB |
| 26 | 360171R1 | 1 | RING |
| 27 | 370255R2 | 1 | WASHER, 57/64 x 1-7/8 x 7/32 |
| 28 | 1315288C1 | 1 | NUT, 7/8 |
| 29 | 1315304C3 | 1 | PLATE |
| 30 | 1319996C3 | 2 | ROD, 3/8 x 11-1/2 in. |
| 31 | 429-106 | 2 | NUT, 3/8″-16, G8, 3/8; 8 |
| 32 | 495-11041 | 2 | WASHER, 3/8″, SAE, (13/32 x 13/16 x 1/16″) |
| 33 | 239748A1 | 1 | DEFLECTOR, See Figure Note |
| 1 | 111787A2 | 1 | MOTOR, ELECTRIC, Electric, Variable Speed |
| 2 | 413-432 | 2 | BOLT, Hex, 1/4″-20 x 2″, G5 |
| 3 | 492-11025 | 2 | WASHER, LOCK, 1/4″ |
| 4 | 425-104 | 2 | NUT, 1/4″-20, G5 |
| 5 | 113485A1 | 2 | SPACER, 17 mm |
| 6 | 55825C1 | 1 | BUSHING |
| 7 | 194338C1 | 1 | GEAR |
| 8 | 38-11020 | 1 | PIN, LOCK, 5/32″ x 1 1/4″, Slotted, 5/32″ x 1 1/4″, Slotted |
| 9 | Q5024 | 1 | KEY, 3/16″ Sq x 1″, Par |
| 10 | 495-11066 | 8 | WASHER, 5/8″, SAE, 21/32 x 1-5/16 x 3/32 |
| 11 | 55826C1 | 2 | BUSHING |
| 12 | 183227C2 | 1 | SUPPORT |
| 13 | 409-7616 | 8 | BOLT, Hex Flg, 3/8″-16 x 1″, Serr |
| 14 | 495-81135 | 8 | WASHER, 13/32″ x 1″ x .120″, 13/32 x 1 x 7/64 |
| 15 | 231-5146 | 8 | NUT, Flg, USR, 3/8″-16 |
| 16 | 188203C3 | 1 | SUPPORT, Left Hand |
| 17 | 477-73820 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1 1/4″, 3/8 x 1-1/4 |
| 18 | 477-73812 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, 3/8 x 3/4 |
| 19 | 231-5146 | 6 | NUT, Flg, USR, 3/8″-16 |
| 20 | 194336C2 | 1 | SUPPORT, Right Hand |
| 22 | 495-81143 | 2 | WASHER, 13/32″ x 1 1/2″ x .120″, 13/32 x 1-1/2 x 1/8 |
| 23 | 231-5146 | 2 | NUT, Flg, USR, 3/8″-16 |
| 24 | 194337C1 | 1 | SPROCKET, 8 T |
| 25 | 485-12512 | 2 | SET SCREW, Sq Hd, 1/4″-20 x 3/4″, set, 1/4 x 3/4 |
| 26 | 425-144 | 2 | NUT, Jam, 1/4″-20, G5 |
| 27 | 1302173C1 | 2 | PAD |
| 28 | 413-624 | 2 | BOLT, Hex, 3/8″-16 x 1 1/2″, G5 |
| 29 | 495-11041 | 4 | WASHER, 3/8″, SAE, (13/32 x 13/16 x 1/16″) |
| 30 | 492-11038 | 2 | WASHER, LOCK, 3/8″ |
| 31 | 425-106 | 2 | NUT, 3/8″-16, G5 |
| 32 | 617107R91 | 1 | CHAIN, Drive, Order: 2040 (31), 457113R91 (1), 457114R91 (2) |
| 33 | 199704A1 | 1 | GUARD |
| 21 | 477-73816 | 2 | SCREW, Sltd Serr Truss Hd, 3/8″ x 1″ |
| 2 | 194064C91 | 1 | HOUSING ASSY., Inc. 3 |
| 3 | 37-1820 | 2 | DOWEL, 1/2″ x 1 1/4″, 1/2 x 1-1/4 |
| 4 | ST863 | 2 | BEARING, CUP |
| 5 | ST783A | 2 | BEARING, CONE |
| 6 | 152127H1 | 1 | BREATHER, 1/8″-27, Short |
| 7 | 194047C1 | 1 | BUSHING |
| 8 | 194051C1 | 2 | SEAL |
| 9 | 22396V | 2 | BEARING SET |
| 10 | 13367DC | 2 | BEARING, CONE |
| 11 | 194057C1 | 2 | WASHER, THRUST |
| 14 | 193828C1 | 1 | PINION, 47 T |
| 15 | 619085C91 | 4 | BEARING, NEEDLE |
| 16 | 193824C1 | 1 | PINION, 58 T |
| 17 | 194059C1 | 1 | SHAFT |
| 18 | 194069C1 | 1 | COLLAR |
| 19 | 100400A1 | 1 | FORK, SHIFTER |
| 21 | 211-1014 | 1 | BALL, 7/16″ Dia, 24,CRS |
| 22 | 107234C1 | 1 | SPRING |
| 23 | 129998 | 1 | PLUG, Hex Hd, 1/2″-20 ORB, Incl. 24 |
| 27 | G10450 | 1 | SEAL |
| 28 | 194039C3 | 1 | COVER |
| 29 | 413-832 | 11 | BOLT, Hex, 1/2″-13 x 2″, G5 |
| 30 | 495-11053 | 1 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 32 | 1957654C1 | 1 | SHAFT |
| 33 | 370255R2 | 1 | WASHER, 57/64 x 1-7/8 x 7/32 |
| 34 | 1315288C1 | 1 | NUT, 7/8 |
| 24 | 237-6005 | 1 | O-RING, 5-1, 90 Duro, .414″ ID x .072″ Thk |
| 2 | 191545C2 | 1 | SHAFT |
| 3 | 191546C2 | 1 | IMPELLER |
| 4 | 439-51272 | 1 | PIN, HEADED, 3/4″ x 4 1/2″, G5 |
| 5 | 432-1620 | 1 | PIN, SPLIT (COTTER), 1/4″ x 1 1/4″, 1/4″ x 1 1/4″ |
| 7 | 361-45024 | 9 | SCREW, Hex Soc Flat Hd, 1/2″-13 x 1 1/2″, 1/2 x 1-1/2 |
| 8 | 326-828 | 9 | BOLT, Hex, 1/2″-13 x 1 3/4″, G8 |
| 9 | 396-41053 | 39 | WASHER, 17/32″ x 1 1/4″ x .188″, HDN, 17/32 x 1-1/4 x 3/16 |
| 10 | 199528A1 | 24 | NUT, 1/2; 8 |
| 11 | 326-844 | 3 | BOLT, Hex, 1/2″-13 x 2 3/4″, G8 |
| 12 | 326-848 | 3 | BOLT, Hex, 1/2″-13 x 3″, G8 |
| 13 | 1308829C2 | 12 | BAR, , Used with 256598A1 |
| 13 | 1324583C3 | 12 | BAR, Chrome, Used with 256605A1 |
| 14 | 426-620 | 24 | BOLT, Hex, 3/8″-16 x 1 1/4″, G8, Full Thd, 3/8 x 1-1/4; 8 |
| 15 | 496-41041 | 24 | WASHER, 13/32″ x 1 1/8″ x .134″ |
| 16 | 232-4136 | 24 | NUT, LOCK, 3/8″-16, GC |
| 17 | 1308668C1 | 9 | RASP BAR, , Used with 256598A1 |
| 17 | 1324582C2 | 9 | RASP BAR, Chrome, Used with 256605A1 |
| 18 | 426-620 | 18 | BOLT, Hex, 3/8″-16 x 1 1/4″, G8, Full Thd, 3/8 x 1-1/4; 8 |
| 19 | 496-41041 | 18 | WASHER, 13/32″ x 1 1/8″ x .134″ |
| 20 | 232-4136 | 18 | NUT, LOCK, 3/8″-16, GC |
| 21 | 1303038C2 | 3 | BAR, , Used with 256598A1 |
| 21 | 1324580C2 | 3 | BAR, Chrome, Used with 256605A1 |
| 22 | 409-7620 | 21 | BOLT, Hex Flg, 3/8″-16 x 1 1/4″, Serr |
| 23 | 231-5146 | 21 | NUT, Flg, USR, 3/8″-16 |
| 24 | 1345307C1 | 1 | COUPLING |
| 25 | 326-852 | 6 | BOLT, Hex, 1/2″-13 x 3 1/4″, G8 |