CASE IH Axial – Flow Combine 1666

      No Comments on CASE IH Axial – Flow Combine 1666

CASE IH Axial – Flow Combine 1666 — parts list, part 2 of 6

Assemblies on this page: Parts list (continued) … Parts list (continued).

Parts list (continued)

Pos Part no. Qty Description
3 548251R1 1 ROD, piston
4 548252R1 1 PISTON, cylinder
5 27293R1 1 NUT, LOCK, 9/16″-18, GC, hex, self-locking, 9/16 inch NF
6 548354R1 1 HEAD, GLAND cylinder, front
1 1308816C2 1 SUPPORT, steering axle
2 426-816 10 BOLT, Hex, 1/2″-13 x 1″, G8, Full Thd, BOLT hex, 1/2 NC x 1 inch, grade 8
3 231-5148 10 NUT, Flg, USR, 1/2″-13
4 426-1224 4 BOLT, Hex, 3/4″-10 x 1 1/2″, G8, BOLT hex, 3/4 NC x 1-1/2 inch, grade 8
5 496-21081 8 WASHER, 13/16″ x 1 1/2″ x .179″, HDN
6 232-51312 8 NUT, Flg, USR, 3/4″-10
7 177748C1 12 SPACER, 13/16 x 1-1/4 x 2-13/16 inch, support
8 182795C1 1 BUSHING, axle pivot
9 439-11288 1 PIN, HEADED, 3/4″ x 5 1/2″, headed, 3/4 x 5-1/2 inch, grade 2
10 432-1620 4 PIN, SPLIT (COTTER), 1/4″ x 1 1/4″, 1/4″ x 1 1/4″
11 168385C2 3 WASHER, flat, special, axle pivot
12 182794C1 2 RING, BUSHING axle pivot
13 219-17 2 NIPPLE, LUBE, 3/16″ x .55″ lg, Drive
14 182792C93 1 SUPPORT ASSY., pivot, front, includes Ref. 12, 182794C1 bushing
15 326-1272 4 BOLT, Hex, 3/4″-10 x 4 1/2″, G8
17 183494C1 2 SUPPORT ASSY., BRACKET adjusting rod, rear, Used with 92 to 120 inch and 108 to 120 inch
18 181444C1 2 TIE-ROD, BODY adjusting rod, rear, Used with 92 to 120 inch and 108 to 120 inch adjustable axles
19 181442C3 2 EYEBOLT, ROD adjusting, front, Used with 92 to 120 inch and 108 to 120 inch adjustable axles only.
20 1541603C1 2 SUPPORT, BRACKET adjusting rod, front, Used with 92 to 120 inch and 108 to 120 inch adjustable
21 425-1016 2 NUT, 1″-8, G5, Hex
22 439-11456 2 PIN, HEADED, 7/8″ x 3 1/2″, headed, 7/8 x 3-1/2 inch, grade 2
23 23729R1 2 PIN, HEADED, 7/8″ x 3″
1 177749C92 1 SUPPORT ASSY., axle pivot, All except 92 to 120 inch axle.
1 186599C93 1 SUPPORT, axle pivot, Includes: Ref. 2, 92 to 120 inch axle.
2 177751C1 1 BUSHING, axle pivot
3 168385C2 1 WASHER, flat, special, pivot tube
5 496-21081 8 WASHER, 13/16″ x 1 1/2″ x .179″, HDN
7 219-17 2 NIPPLE, LUBE, 3/16″ x .55″ lg, Drive
8 196084C2 1 CHANNEL, STRAP tow, All except 92 to 120 inch axle.
8 1302625C1 1 CHANNEL, STRAP tow, 92 to 120 inch axle.
10 232-51310 2 NUT, Flg, USR, 5/8″-12, hex serrated flange, 5/8 inch NC, grade 8
11 193917C1 1 ANCHOR, steering cylinder, All except 92 to 120 inch axle.
11 182782C1 1 ANCHOR, steering cylinder, 92 to 120 inch axle.
13 182799C2 1 AXLE, adjustable, 67 to 91 inch, grain
13 1302520C2 1 AXLE, adjustable, 67 to 91 inch, corn
13 186317C3 1 AXLE (CENTRE PART), adjustable, 92 – 120 inch, grain
13 1302522C3 1 AXLE (CENTRE PART), adjustable, 92 – 120 inch, corn
14 177763C91 1 EXTENSION ASSY., axle, left hand, 67 to 91 inch
14 183454C91 1 EXTENSION, axle, left hand, 92 to 120 inch, Includes: Ref. 15
15 358958R2 2 BUSHING, spindle, included with 183454C91 and 177763C91 axle extension assemblies
18 177764C91 1 EXTENSION ASSY., axle, right hand, 67 to 91 inch
18 183455C91 1 EXTENSION, axle, right hand, 92 to 120 inch, Includes: Ref. 19
19 358958R2 2 BUSHING, spindle, included with 183455C91 and 177764C91 axle extension assemblies
24 548247R91 1 CYLINDER ASSY., 2 (51) ID x 9 inch (229 mm) stroke, steering, parts list Fig. 5-10
25 1315374C1 1 KNUCKLE, STEERING, parts list Fig. 5-26
26 193911C3 1 ARM, steering, left hand
27 193912C3 1 ARM, steering, right hand
28 186796C1 2 BALL JOINT, SOCKET cylinder end, Includes: Ref. 29 thru 32
29 384371R1 1 CLAMP, socket
30 413-730 1 BOLT, Hex, 7/16″-14 x 1 7/8″, G5, BOLT hex, 7/16 NC x 1-7/8 inch
31 231-4117 1 NUT, LOCK, 7/16″-14, GB, hex, self-locking, 7/16 inch NC
32 219-8 1 NIPPLE, LUBE, 1/4″-28 NPT x .54″ lg
33 382562R1 2 SEAL, end
34 95-81019 2 WASHER, 23/32″ x 1 1/2″ x .120″, flat, 23/32 x 1-1/2 x 7/64 inch
35 425-1310 4 NUT, SLOTTED, 5/8″-18, G5, hex, slotted, 5/8 inch NF
36 432-824 4 PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
37 167955C2 1 SEAL, GROMMET steering hoses
38 413-572 1 BOLT, Hex, 5/16″-18 x 4 1/2″, G5, BOLT hex, 5/16 NC x 4-1/2 inch, Power steering hoses on 92 to 120
39 495-81116 1 WASHER, .344″ x 1″ x .060″, flat, 11/32 x 1 x 3/64 inch, Power steering hoses on 92 to 120 inch axle
40 26613R1 1 CLAMP, 1 7/8″, Insul, 1/2″ Bolt, 1-7/8 inch diameter, steering hose, Power steering hoses on 92 to 120
41 492-11031 1 WASHER, LOCK, 5/16″, , Power steering hoses on 92 to 120 inch axle only.
42 425-105 1 NUT, 5/16″-18, G5, , Power steering hoses on 92 to 120 inch axle only.
1 186599C93 1 SUPPORT, axle pivot, Includes: Ref. 2
2 177751C1 2 BUSHING, axle pivot
4 413-1280 6 BOLT, Hex, 3/4″-10 x 5″, G5, hex, 3/4 NC x 5 inch
5 326-1288 2 BOLT, Hex, 3/4″-10 x 5 1/2″, G8
6 496-21081 11 WASHER, 13/16″ x 1 1/2″ x .179″, HDN
7 232-51312 16 NUT, Flg, USR, 3/4″-10
8 219-17 2 NIPPLE, LUBE, 3/16″ x .55″ lg, Drive
9 1302625C1 1 CHANNEL, STRAP tow
10 326-1048 2 BOLT, Hex, 5/8″-11 x 3″, G8
11 232-51310 2 NUT, Flg, USR, 5/8″-12, hex serrated flange, 5/8 inch NC, grade 8
12 186317C3 1 AXLE (CENTRE PART), adjustable, 92 – 120 inch
13 186045C2 2 EXTENSION ASSY., axle, 92 – 120 inch
14 413-1272 6 BOLT, Hex, 3/4″-10 x 4 1/2″, G5, hex, 3/4 NC x 4-1/2 inch
16 413-1288 2 BOLT, Hex, 3/4″-10 x 5 1/2″, G5, hex, 3/4 NC x 5-1/2 inch
18 186641C1 1 LEVER, ARM steering, left hand
19 186639C1 1 LEVER, ARM steering, right hand
20 326-1052 4 BOLT, Hex, 5/8″-11 x 3 1/4″, G8
21 326-1080 2 BOLT, Hex, 5/8″-11 x 5″, G8
22 492-11062 6 WASHER, LOCK, 5/8″
23 429-1010 6 NUT, 5/8″-11, G8
24 186574C1 1 ANCHOR, steering cylinder, 92 – 120 inch axle, replaced by 133319A1
24 133319A1 1 SUPPORT, ANCHOR steering cylinder, replaces 186574C1
25 413-1280 1 BOLT, Hex, 3/4″-10 x 5″, G5, hex, 3/4 NC x 5 inch
26 413-1284 1 BOLT, Hex, 3/4″-10 x 5 1/4″, G5, BOLT hex, 3/4 NC x 5-1/4 inch
27 177748C1 8 SPACER, 13/16 x 1-1/4 x 2-13/16 inch, support
29 548247R91 1 CYLINDER ASSY., 2 (51) ID x 9 inch (229 mm) stroke, tie, parts list Fig. 5-10
30 181335C91 2 BALL JOINT, END ASSEMBLY steering cylinder, Includes: Ref. 31 thru 35
31 446308C91 1 CLAMP, ASSEMBLY steering cylinder end, Includes: Ref. 32 and 35
32 413-730 1 BOLT, Hex, 7/16″-14 x 1 7/8″, G5, BOLT hex, 7/16 NC x 1-7/8 inch
33 231-4117 1 NUT, LOCK, 7/16″-14, GB, hex, self-locking, 7/16 inch NC
34 110373R1 1 DUST CAP, end, cylinder, steering
35 425-1314 2 NUT, SLOTTED, 7/8″-14, G5
36 432-816 2 PIN, SPLIT (COTTER), 1/8″ x 1″
37 219-1 2 NIPPLE, LUBE, 1/8″-27 x .66 lg
40 413-572 1 BOLT, Hex, 5/16″-18 x 4 1/2″, G5, BOLT hex, 5/16 NC x 4-1/2 inch
41 495-81116 1 WASHER, .344″ x 1″ x .060″, flat, 11/32 x 1 x 3/64 inch
42 26613R1 1 CLAMP, 1 7/8″, Insul, 1/2″ Bolt, 1-7/8 inch diameter, steering hose, For steering hoses on 92 to 120
43 492-11031 1 WASHER, LOCK, 5/16″, , For steering hoses on 92 to 120 inch axle only.
44 425-105 1 NUT, 5/16″-18, G5, , For steering hoses on 92 to 120 inch axle only.
45 167955C2 1 SEAL, GROMMET steering hoses, For steering hoses on 92 to 120 inch axle only.
2 1300170C1 1 TUBE, tie rod
3 1302687C1 1 JOINT, END tie rod, right hand
4 225265R1 1 CLAMP, tie rod, right hand, Includes: Ref. 5 thru 6
5 413-840 1 BOLT, Hex, 1/2″-13 x 2 1/2″, G5, hex, 1/2 NC x 2-1/2 inch
6 231-4118 1 NUT, LOCK, 1/2″-13, GB, hex, self-locking, 1/2 inch NC
7 1302686C1 1 JOINT, END tie rod, left hand
11 382562R1 2 SEAL, end
12 432-824 2 PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
13 425-1310 2 NUT, SLOTTED, 5/8″-18, G5, hex, slotted, 5/8 inch NF
14 193911C3 1 ARM, steering, right hand
15 193912C3 1 ARM, steering, left hand
16 219-1 2 NIPPLE, LUBE, 1/8″-27 x .66 lg
1 180801C1 1 TIE ROD, TUBE
2 A43376 1 JOINT, END ASSEMBLY tie rod, right hand, Includes: Ref. 3 and 4
3 A31186 1 BOOT, SEAL dust, tie rod end
4 358901R1 1 NUT, hex slotted, 5/8 inch NF
5 446308C91 1 CLAMP, ASSEMBLY tie rod, 1-3/8 inch
5 1319476C91 1 CLAMP, tie rod, 1-1/2 inch
6 180799C91 1 TIE-ROD, tie rod, left hand, Includes: Ref. 7 and 8
7 A31186 1 BOOT, SEAL dust, tie rod end
8 358901R1 1 NUT, hex slotted, 5/8 inch NF
9 A43369 4 CLAMP, washer
10 328-648 2 BOLT, Hex, 3/8″-24 x 3″, G8
12 432-824 2 PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
13 193911C3 1 ARM, steering, right hand
14 193912C3 1 ARM, steering, left hand
15 219-1 2 NIPPLE, LUBE, 1/8″-27 x .66 lg
16 413-730 1 BOLT, Hex, 7/16″-14 x 1 7/8″, G5, BOLT hex, 7/16 NC x 1-7/8 inch
17 231-4117 1 NUT, LOCK, 7/16″-14, GB, hex, self-locking, 7/16 inch NC
11 232-4636 2 NUT, LOCK, 3/8″-24, GC
1 185106C91 2 BEARING, thrust, knuckle
2 15943DA 2 WASHER, SEALING, WASHER felt, special, knuckle pivot
3 1315374C1 2 KNUCKLE, STEERING, Includes: Ref. 4 and 5
4 1259522C1 1 SHIELD, dust
5 491641C1 1 SEAL, hub
6 425-1522 2 NUT, Jam, 1 3/8″-12, G5, hex, jam, 1-3/8 inch NF
7 495-81218 2 WASHER, 1 13/32″ x 2 3/4″ x .048″, flat, 1-13/32 x 2-3/4 x 3/64 inch
8 1259683C1 2 NUT, hex, slotted, 30 mm – 1.5
9 732-6363 2 PIN, SPLIT (COTTER), M6.3 x 63, 6 x 63 mm
10 ST753B 2 BEARING, CONE, tapered roller, wheel, inner 2-5/8 inch ID
11 130504H 2 BEARING, CONE, tapered roller, wheel, outer
12 1259528C1 2 HUB, ASSEMBLY wheel, Includes: Ref. 13 thru 16
13 1264549C1 1 WASHER, CUP, hub seal
14 A26744 1 BEARING SET, tapered roller, wheel, inner 4-5/16 inch O.D.
15 130503H 1 BEARING, CUP, tapered roller, wheel, outer 3-17/64 inch O.D.
16 219-17 2 NIPPLE, LUBE, 3/16″ x .55″ lg, Drive
16 219-404 2 NIPPLE, LUBE, 45є, 3/16″ x .83″ lg, Drive
17 896-12030 2 WASHER, M30 x 56.5 x 5, HT, flat, 33 x 56 x 5 mm, hardened
18 189425C1 2 HUB CAP, wheel hub
19 414064C1 16 BOLT, Hex Flg, 9/16″-12 x 1 1/2″, G5, Full Thd, BOLT hex flange, special
20 396-41066 16 WASHER, 21/32″ x 1 1/2″ x .188″, HDN, flat, 21/32 x 1-1/2 x 3/16 inch, hardened, used with 186642C2
21 186642C2 2 WHEEL, 18.4-16 inch tire
21 188759C2 2 RIM, 10 x 24 inch, for 11.25 x 24 inch tire
21 1541719C1 2 RIM, 12 x 24 inch, for 14.9 x 24 inch tire
21 1970153C1 2 RIM, drive, steering, used with 16.9 x 26 inch and 18.4 x 26 inch tires
23 536705R91 2 VALVE, inflation, 5/8 inch diameter
23 179482C1 2 VALVE STEM, inflation, 7/16 inch diameter
1 A27602 2 BEARING, THRUST, roller, steering knuckle
2 219-87 4 NIPPLE, LUBE, 1/4″-28 x .56″ lg, Self-Tap
3 185439C91 1 KNUCKLE, STEERING, steering, left hand, includes 186680C1 bushing, Ref. 4
3 185440C91 1 KNUCKLE, STEERING, steering, right hand, Includes: Ref. 4
4 186680C1 2 BUSHING, king pin
5 186052C1 2 PIN, king
8 25-1224 2 NUT, SLOTTED, 1 1/2″-6, G5, hex, slotted, 1-1/2 inch NC
9 95-81041 2 WASHER, 1 17/32″ x 3″ x .120″, flat, 1-17/32 x 3 x 7/64 inch
10 432-1648 2 PIN, SPLIT (COTTER), 1/4″ x 3″, 1/4″ x 3″
11 425-1316 2 NUT, SLOTTED, 1″-14, G5, hex, slotted, 1 inch NS
12 432-1228 2 PIN, SPLIT (COTTER), 3/16″ x 1 3/4″
13 936727R1 2 WASHER, flat, 1-1/32 x 2-1/4 x 1/4 inch
14 169329C91 2 SEAL, oil
15 A61447 2 BEARING, CONE, tapered roller, inner, 2-1/16 inch ID
16 663557R91 2 BEARING, CONE, tapered roller, outer, 1-5/8 inch ID
17 560950R1 2 HUB CAP, wheel hub
18 169293C11 2 HUB, ASSEMBLY wheel, Includes: Ref. 19 thru 23
19 169328C1 1 SLEEVE, RING wear, oil
20 366021R2 8 BOLT, fluted, 5/8 NF x 2-9/16 inch
21 554480R1 8 NUT, hex, special, 5/8 inch NF
22 625743C1 1 BEARING, CUP, tapered roller, inner, 3-35/64 inch O.D.
23 663558R1 1 BEARING, CUP, tapered roller, outer, 2-57/64 inch O.D.
24 188759C2 2 RIM, 10 x 24 inch, for 11.25 x 24 inch tire
24 1541719C1 2 RIM, 12 x 24 inch, for 14.9 x 24 inch tire
24 1970153C1 2 RIM, drive, steering, used with 16.9 x 26 inch and 18.4 x 26 inch tires
26 179482C1 2 VALVE STEM, inflation, 7/16 inch diameter
1 1325596C2 1 SHIELD, steering axle
3 195450C2 1 SUPPORT ASSY., HINGE axle shield
4 203942C1 1 SPRING, shield pivot
5 183093C1 2 BRACKET, shield support
6 183094C1 1 CUSHION, SUPPORT axle shield
9 1325374C3 1 COVER, PLATE hood extension, left hand
10 1325375C3 1 COVER, PLATE hood extension, right hand
11 1325376C1 2 PLATE, BRACKET hood extension, retaining
12 135270 16 BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″, slotted truss head, 5/16 NC x 3/4 inch
13 231-5145 16 NUT, Flg, USR, 5/16″-18
15 38-1814 1 PIN, LOCK, 1/8″ x 7/8″, Slotted, 1/8″ x 7/8″, Slotted
16 413-516 4 BOLT, Hex, 5/16″-18 x 1″, G5, Full Thd, hex, 5/16 NC x 1 inch
17 232-4115 4 NUT, LOCK, 5/16″-18, GC
18 495-11034 4 WASHER, 5/16″, SAE, flat, 11/32 x 11/16 x 1/16 inch
19 1345126C1 1 CUSHION, axle shield
20 1968976C1 2 STRIP, TRIM edge, not shown
1 1970137C2 2 MOTOR, HYDRAULIC, ASSEMBLY drive, wheel, corn and grain, parts list Fig. 5-50, Motors do not
1 121436A1 2 MOTOR, HYDRAULIC, ASSEMBLY drive, wheel, corn and grain, parts list Fig. 5-50, Motors do not
2 1978000C1 1 VALVE, ASSEMBLY selector, parts list Fig. 5-48
3 1970387C1 4 HOSE, 57 inch (1448 mm) long, pressure, motor drain
4 1970388C1 1 HOSE, 67 inch (1702 mm) long, pressure, motor drain
6 218-5230 1 ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, 37є Fem Sw
7 218-5070 4 CONNECTOR, HYD., 3/4″-16, 37є x 1 1/16″-12, O-Ring, ADAPTER straight, 3/4-16 flare x 1-1/16-12
9 1970389C1 1 HOSE, 61 inch (1549 mm) long, motor drain
10 1970108C1 2 COVER, PROTECTIVE, SLEEVE nylon, 2-3/8 (60) ID x 48 inch (1219 mm) long
11 218-5230 1 ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, 37є Fem Sw
12 218-845 1 TEE, 37є, 3/4″-16 x 3/4″-16, Fem Sw Run, 3/4-16 inch flare branch x flare x swivel
14 237-6012 5 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
18 1970140C1 1 TUBE, HYD, pressure, charge
19 218-5053 1 CONNECTOR, HYD., 7/16″-20, 37є x 7/16″-20, O-Ring, ADAPTER
20 218-5289 1 TEE, 7/16″-20, 37є x 7/16″-20, O-Ring Run, TEE, 7/16-20 inch flare branch x flare x adj O-ring boss
21 1970176C1 1 PLUG, hex, special, hydraulic
22 218-752 1 CAP, 37є, 7/16″-20, Hex
23 237-6004 2 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
25 1964572C2 1 HARNESS, WIRE, power, solenoid
1 1970137C2 2 MOTOR, HYDRAULIC, ASSEMBLY drive, wheel, corn and grain, parts list Fig. 5-50, Motors do not
1 121436A1 2 MOTOR, HYDRAULIC, ASSEMBLY drive, wheel, corn and grain, parts list Fig. 5-50, Motors do not
3 1346974C1 2 FITTING, ADAPTER flush port, metric thread, purchase separately, used with 1970137C2 motor, BSN
4 1346971C1 2 TUBE, HYD, TUBE motor flush, corn and grain
5 121435A1 2 HOSE, 58 inch (1473 mm) long, wheel motor flush
6 218-805 1 TEE, 3/4″-16, 37є, Blkhd, 3/4-16 inch bulkhead flare branch x flare x flare
7 1979706C1 1 HOSE, 144-3/32 inch (3660 mm) long, case flush
8 1347182C1 2 CLAMP, CLAMP flush tube, corn and grain
9 495-11053 2 WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″), Corn and grain
10 614-12040 2 BOLT, Hex, M12 x 40, 8.8, Full Thd, BOLT hex, 3/8 NC x 1 inch, grade 8
12 1347068C1 1 SUPPORT, BRACKET flush tee
13 232-4116 2 NUT, LOCK, 3/8″-16, GC
15 214-1404 1 CLAMP, HOSE, #4, 0.25/0.62 Type M Worm, Adj
16 218-1255 1 NUT, LOCK, Blkhd, 3/4″-16
1 127913C93 1 CYLINDER STEERING, ASSEMBLY, 2-1/4 (57) ID x 9 inch (229 mm) stroke, steering, parts list Fig.
2 1970138C1 2 HOUSING, king pin
3 179202C1 1 HOSE, 68 inch (1727 mm) long
4 183920C1 1 HOSE ASSY., 77 inch (1956 mm) long
5 167955C2 1 SEAL, GROMMET steering cylinder hoses
6 186140C91 2 BALL JOINT, END ASSEMBLY steering cylinder, Includes: Ref. 7,8 and 9
7 110373R1 1 DUST CAP, end, cylinder, ball joint
8 425-1314 1 NUT, SLOTTED, 7/8″-14, G5
9 446308C91 1 CLAMP, ASSEMBLY ball joint, Includes: Ref. 10 and 11
10 413-730 1 BOLT, Hex, 7/16″-14 x 1 7/8″, G5, BOLT hex, 7/16 NC x 1-7/8 inch
11 231-4117 1 NUT, LOCK, 7/16″-14, GB, hex, self-locking, 7/16 inch NC
12 432-816 2 PIN, SPLIT (COTTER), 1/8″ x 1″
13 219-1 2 NIPPLE, LUBE, 1/8″-27 x .66 lg
16 26613R1 1 CLAMP, 1 7/8″, Insul, 1/2″ Bolt, 1-7/8 inch diameter, hose
17 413-572 1 BOLT, Hex, 5/16″-18 x 4 1/2″, G5, BOLT hex, 5/16 NC x 4-1/2 inch
18 425-105 1 NUT, 5/16″-18, G5
19 495-81116 1 WASHER, .344″ x 1″ x .060″, flat, 11/32 x 1 x 3/64 inch
20 492-11031 1 WASHER, LOCK, 5/16″
22 1970102C1 1 TIE-ROD, STEERING, tie rod, outer
23 1970103C1 2 TUBE, tie rod, inner
24 1968998C1 2 BALL JOINT, tie rod
25 1970391C1 2 NUT, hex, jam, special, 1-1/8 inch NF
26 110373R1 2 DUST CAP, end, cylinder, ball joint
27 425-1314 2 NUT, SLOTTED, 7/8″-14, G5
28 432-816 2 PIN, SPLIT (COTTER), 1/8″ x 1″
30 219-1 2 NIPPLE, LUBE, 1/8″-27 x .66 lg
31 326-856 4 BOLT, Hex, 1/2″-13 x 3 1/2″, G8
32 1970104C1 4 SPACER, tube, tie rod
33 232-4118 4 NUT, LOCK, 1/2″-13, GC
34 1970101C1 4 CLAMP, centering, tie rod
38 1970383C1 4 GUIDE, hose
39 413-1280 4 BOLT, Hex, 3/4″-10 x 5″, G5, hex, 3/4 NC x 5 inch
40 232-51312 4 NUT, Flg, USR, 3/4″-10
41 76344 2 ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, O-Ring, ELBOW, 90 degree, 9/16-18 inch flare x adj O-ring
42 237-6006 2 O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
1 1978000C1 1 VALVE, ASSEMBLY selector, parts list Fig. 5-48
2 201-307 1 ELBOW, 90є, 1 3/16″-12 x 1 1/16″-12 Adj, ORFS, 90 degree, 1-3/16-12 face seal x 1-1/16-12 inch adj
3 201-365 1 ELBOW, 90є, 1 3/16″-12 x 1 1/16″-12 Sw, ORFS, 90 degree long, 1-3/16-12 face seal x 1-1/16-12 inch
4 237-6012 2 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
5 1989218C1 2 HOSE, 77-3/8 inch (1965 mm) long, valve pressure
6 1970108C1 2 COVER, PROTECTIVE, SLEEVE nylon, 2-3/8 (60) ID x 48 inch (1219 mm) long
9 238-6018 6 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
10 1541756C2 1 PIPE, TUBE forward pressure
11 1541757C2 1 PIPE, TUBE reverse pressure
12 1324467C2 1 ANGLE, BRACKET hose
13 1324473C1 1 CLAMP, hose
14 1324469C1 1 PLATE, clamp, hose
15 326-552 1 BOLT, Hex, 5/16″-18 x 3 1/4″, G8
16 232-4115 1 NUT, LOCK, 5/16″-18, GC
17 218-5351 1 CONNECTOR, HYD., 3/4″-16, 37є x 9/16″-18, O-Ring, ADAPTER straight, 3/4-16 flare x 9/16-18 inch
19 218-845 1 TEE, 37є, 3/4″-16 x 3/4″-16, Fem Sw Run, 3/4-16 inch flare branch x flare x swivel
22 1957283C3 1 HOSE, 134-1/4 inch (3410 mm) long, housing drain
23 1979706C1 1 HOSE, 144-3/32 inch (3660 mm) long, case drain
25 1979655C1 1 TEE, wheel motor flush
26 1343558C1 1 VALVE, bypass, power guide axle
29 1979760C1 1 TEE, return
30 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
31 214-1704 2 CLAMP, HOSE, #4, 0.25/0.62 Type M Worm, Adjustable
33 1979767C1 1 ADAPTER, special, 1-1/16 O-ring boss x 1-5/16 inch female PT
34 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
18 237-6006 1 O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
1 1978000C1 1 VALVE, ASSEMBLY selector, parts list Fig. 5-48
2 1324455C2 1 PLATE, PLATE mounting, valve
3 426-624 2 BOLT, Hex, 3/8″-16 x 1 1/2″, G8, BOLT hex, 3/8 NC x 1-1/2 inch, grade 8
4 492-11038 2 WASHER, LOCK, 3/8″
5 1324454C3 1 BAR, PLATE mounting, valve
6 426-616 4 BOLT, Hex, 3/8″-16 x 1″, G8, Full Thd
7 232-4116 4 NUT, LOCK, 3/8″-16, GC
8 1324471C1 2 BRACKET, SUPPORT valve
1 1970137C2 2 MOTOR, HYDRAULIC, ASSEMBLY drive, wheel, corn and grain, parts list Fig. 5-50, BSN JJC0105176
1 121436A1 2 MOTOR, HYDRAULIC, ASSEMBLY drive, wheel, corn and grain, parts list Fig. 5-50, ASN JJC0105176
2 1970138C1 2 HOUSING, king pin
3 1970136C1 1 HOUSING, CARRIER wheel motor, right hand, support
3 1970354C1 1 FRAME, CARRIER wheel motor, left hand, support
4 100-21244 4 RING, SNAP, 2.44″, Int, #244
5 41-3040 4 PLUG, Exp, 2 1/2″
6 219-57 4 NIPPLE, LUBE, 90є, 1/4″ NPT x .75″ lg, FITTING grease, 90 degree, 1/4-28 taper x 3/4 inch
7 1970142C1 4 BUSHING, pivot, bronze
8 1970143C1 2 PIN, king
10 1970381C1 2 WASHER, thrust, steel
11 1970382C1 4 WASHER, thrust, bronze
12 83-15020 2 SET SCREW, Hex Soc, 1/2″-13 x 1 1/4″, set, hex socket headless, 1/2 NC x 1-1/4 inch, cup point
13 1970148C1 8 CLAMP, hydraulic, tube
14 1970150C1 2 PLATE, PLATE clamp
15 326-532 4 BOLT, Hex, 5/16″-18 x 2″, G8
16 492-11031 4 WASHER, LOCK, 5/16″
19 1970146C1 2 TUBE, HYD, TUBE pressure, right hand rear, left hand front
20 1970147C1 2 TUBE, HYD, TUBE pressure, left hand rear, right hand front
21 1324470C1 10 WASHER, flat, special, 41/64 x 1 x 3/64 inch
22 326-1026 10 BOLT, Hex, 5/8″-11 x 1 5/8″, G8, Full Thd
23 1970151C1 16 STUD, mounting, wheel
24 1970395C1 2 FITTING, ADAPTER straight, special, metric thread, used with 1970137C2 motor only, See Fig. 5-50
25 1970396C1 4 FITTING, ADAPTER straight, special, metric thread, used with 1970137C2 motor only, See Fig. 5-50
26 218-5059 2 CONNECTOR, HYD., 3/4″-16, 37є x 3/4″-16, O-Ring, ADAPTER straight, 3/4-16 inch flare x O-ring
27 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
28 326-1236 12 BOLT, Hex, 3/4″-10 x 2 1/4″, G8
29 492-11075 12 WASHER, LOCK, 3/4″, 3/4″
30 326-1028 4 BOLT, Hex, 5/8″-11 x 1 3/4″, G8, Full Thd
31 329-1410 4 NUT, Jam, 5/8″-11, G8
32 218-5064 4 CONNECTOR, HYD., 1 1/16″-12, 37є x 1 1/16″-12, O-Ring, ADAPTER straight, 1-1/16-12 inch flare x
33 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
35 1970153C1 2 RIM, drive, steering, for 16.9-26 or 18.4-26 tire, axle drive wheel
36 905654R1 16 NUT, hex flange, axle drive wheel
36 1541701C1 16 NUT, hex flange, special, axle drive wheel
37 496-31081 16 WASHER, 13/16″ x 1 1/2″ x .219″, HDN, flat, 13/16 x 1-1/2 x 7/32 inch, hardened, axle drive wheel
1 1322258C2 1 SUPPORT, steering axle
2 426-816 10 BOLT, Hex, 1/2″-13 x 1″, G8, Full Thd, BOLT hex, 1/2 NC x 1 inch, grade 8
3 232-5138 10 NUT, Flg, USR, 1/2″-13, G8
4 426-1224 4 BOLT, Hex, 3/4″-10 x 1 1/2″, G8, BOLT hex, 3/4 NC x 1-1/2 inch, grade 8
5 496-21081 8 WASHER, 13/16″ x 1 1/2″ x .179″, HDN
6 232-51312 8 NUT, Flg, USR, 3/4″-10
9 177748C1 12 SPACER, 13/16 x 1-1/4 x 2-13/16 inch, support
10 182795C1 1 BUSHING, axle pivot
11 439-11288 1 PIN, HEADED, 3/4″ x 5 1/2″, headed, 3/4 x 5-1/2 inch, grade 2
14 182794C1 2 RING, BUSHING axle pivot
15 219-93 2 NIPPLE, LUBE, 90є, 1/4″ NPT x .75″ lg, Drive, grease, 90 degree, 1/4-28 special taper x 3/4 inch
18 182792C93 1 SUPPORT ASSY., pivot, front
19 326-1272 4 BOLT, Hex, 3/4″-10 x 4 1/2″, G8
21 1970206C1 2 BRACKET, stabilizer, rear
22 181444C1 2 TIE-ROD, BODY adjusting, rear
23 181442C3 2 EYEBOLT, ROD adjusting, front
24 1541603C1 2 SUPPORT, BRACKET adjusting rod, front
25 425-1016 2 NUT, 1″-8, G5, Hex
28 439-11456 2 PIN, HEADED, 7/8″ x 3 1/2″, headed, 7/8 x 3-1/2 inch, grade 2
29 23729R1 2 PIN, HEADED, 7/8″ x 3″
31 426-824 6 BOLT, Hex, 1/2″-13 x 1 1/2″, G8, Full Thd, hex, 1/2 NC x 1-1/2 inch, grade 8
1 1968991C1 1 AXLE, adjustable, 108 to 144 inch
2 168385C2 4 WASHER, flat, special, thrust, pivot shaft
3 186599C93 1 SUPPORT, axle pivot, Includes: Ref. 4
4 177751C1 2 BUSHING, pivot, axle
5 219-93 2 NIPPLE, LUBE, 90є, 1/4″ NPT x .75″ lg, Drive, grease, 90 degree, 1/4-28 special taper x 3/4 inch
6 1968992C1 2 AXLE, EXTENSION
10 413-1280 10 BOLT, Hex, 3/4″-10 x 5″, G5, hex, 3/4 NC x 5 inch
11 326-1288 4 BOLT, Hex, 3/4″-10 x 5 1/2″, G8
13 1968993C1 1 SUPPORT, steering bracket
14 1979114C1 1 STRAP, tow
15 326-1048 2 BOLT, Hex, 5/8″-11 x 3″, G8
16 231-51410 2 NUT, Flg, USR, 5/8″-11
17 326-1288 2 BOLT, Hex, 3/4″-10 x 5 1/2″, G8
18 326-1272 6 BOLT, Hex, 3/4″-10 x 4 1/2″, G8
19 496-21081 8 WASHER, 13/16″ x 1 1/2″ x .179″, HDN
20 1979120C1 1 GUIDE, CLAMP P-type, special, 1-1/2 inch ID, hose, cylinder
21 326-1296 1 BOLT, Hex, 3/4″-10 x 6″, G8
2 127919C1 1 GLAND, cylinder, front
3 127921C1 1 PISTON, cylinder
4 127920C2 1 ROD, PISTON
5 9411658 1 NUT, LOCK, 5/8″-11, GC, hex, self locking, 5/8 inch NF, grade 8
2 218-5070 4 CONNECTOR, HYD., 3/4″-16, 37є x 1 1/16″-12, O-Ring, ADAPTER straight, 3/4-16 flare x 1-1/16-12
7 237-6004 7 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk, Tube
8 278548 6 PLUG, Hex Soc, 7/16″-20 ORB
10 218-5151 1 PLUG, Hex Hd, 5/16″-24 ORB, hex, 5/16-24 inch O-ring boss
11 237-6002 1 O-RING, 2-1, .239″ ID x .064″ Thk, Plug sealing
15 1970176C1 2 PLUG, hex, special
16 237-6012 2 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
20 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
21 1979118C1 4 PLUG, hex, flow divider spool
22 237-6012 4 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk, Plug
26 211-1010 2 BALL, 5/16″ Dia, chrome alloy steel, 5/16 inch, grade 24
29 187849C1 1 VALVE, SOLENOID, VALVE solenoid, 4 way, cartridge only, Includes: Ref. 30
30 187850C1 1 KIT, SEALS, KIT replacement, washer and O-ring, solenoid valve
46 218-5230 1 ELBOW, 90є, 3/4″-16, 37є x 3/4″-16, 37є Fem Sw
47 218-845 2 TEE, 37є, 3/4″-16 x 3/4″-16, Fem Sw Run, 3/4-16 inch flare branch x flare x swivel
48 218-5351 1 CONNECTOR, HYD., 3/4″-16, 37є x 9/16″-18, O-Ring, ADAPTER straight, 3/4-16 flare x 9/16-18 inch
49 237-6006 1 O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
50 1970140C1 1 TUBE, HYD, pressure, charge
51 218-5053 1 CONNECTOR, HYD., 7/16″-20, 37є x 7/16″-20, O-Ring, ADAPTER
52 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk, ADAPTER straight, 3/4-16 inch flare x O-ring boss
55 218-5289 1 TEE, 7/16″-20, 37є x 7/16″-20, O-Ring Run, TEE, 7/16-20 inch flare branch x flare x adj. O-ring boss
56 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
57 218-752 1 CAP, 37є, 7/16″-20, Hex
60 1340843C1 1 COIL, KIT solenoid coil, 12 volt, valve
61 1345302C1 1 HARNESS, WIRE, solenoid, adapter
62 413-616 1 BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd, hex, 3/8 NC x 1 inch
63 493-11039 1 WASHER, LOCK, 3/8″, Int-Ext Tooth, internal, external tooth lock, 3/8 inch
64 425-106 1 NUT, 3/8″-16, G5
6 1970151C1 8 STUD, mounting, retaining, shaft
27 1978004C1 1 KIT, SEALS, KIT block
34 1970394C1 1 CASE, ACCUMULATOR housing, motor
35 1978005C1 1 COVER, PLATE
45 238-5162 1 O-RING, -162, 70 Duro, 5.737″ ID x .103″ Thk
46 218-5059 1 CONNECTOR, HYD., 3/4″-16, 37є x 3/4″-16, O-Ring, ADAPTER straight, 3/4-16 inch flare x O-ring
47 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
48 218-5064 2 CONNECTOR, HYD., 1 1/16″-12, 37є x 1 1/16″-12, O-Ring, ADAPTER straight, 1-1/16-12 inch flare x
49 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
50 121434A1 1 ADAPTER, flush port, English thread, included with 121436A1 motor only, ASN JJC0105176
1 185365C2 1 SUPPORT, weight, replaces 185365C1
2 1308872C1 2 BRACKET, weight retaining
3 178434C1 1 CLAMP, weight
4 561838R1 1 PLATE, CLAMP weight
6 413-840 4 BOLT, Hex, 1/2″-13 x 2 1/2″, G5, hex, 1/2 NC x 2-1/2 inch
7 425-108 6 NUT, 1/2″-13, G5
8 80679 7 WASHER, LOCK, 1/2″
9 413-888 3 BOLT, Hex, 1/2″-13 x 5 1/2″, G5, hex, 1/2 NC x 5-1/2 inch
1 184433C3 1 HOUSING, power takeoff drive, Includes: Ref. 2 and 3
2 188072C1 1 TUBE, dipstick, oil
3 1330136C1 2 DOWEL, PIN locating
4 186019C91 1 DIPSTICK, PTO housing oil, level, Includes: Ref. 5
5 238-5210 2 O-RING, -210, 70 Duro, .734″ ID x .139″ Thk
6 185056C1 1 COVER, bolt access hole
7 185057C2 1 GASKET, access cover
8 413-68 2 BOLT, Hex, 3/8″-16 x 1/2″, G5, Full Thd
9 492-11038 2 WASHER, LOCK, 3/8″
13 1329747C1 1 HOUSING, separator drive, Includes: Ref. 14
14 195439C2 1 PIN, clutch housing, separator
15 495-81073 4 WASHER, 1 1/32″ x 1 3/4″ x .060″, flat, 1-1/32 x 1-3/4 x 1/16 inch
16 432-1624 1 PIN, SPLIT (COTTER), 1/4″ x 1 1/2″
17 426-620 6 BOLT, Hex, 3/8″-16 x 1 1/4″, G8, Full Thd, BOLT hex, 3/8 NC x 1-1/4 inch, grade 8
18 50057K 1 PLUG, separator housing
19 188279C1 1 O-RING, -266, 90 Duro, 7.984″ ID x .139″ Thk, 8 ID x 1/8 inch wide
27 1329745C1 1 SHAFT, PULLEY, separator drive
28 18521R1 1 NUT, LOCK, 1″-14, G8, hex, self-locking, 1 inch NF
29 396-31106 2 WASHER, 1 1/16″ x 2″ x .219″, HDN, flat, 1-1/16 x 2 x 7/32 inch, hardened
30 194737C1 1 NUT, hex, special, 1 inch NF
31 ST987 1 RACE, RING, CUP tapered roller bearing, 3-17/64 inch O.D., separator housing rear
32 300426R91 1 BEARING, CONE, tapered roller, 1-25/32 inch ID, separator housing rear
33 376463C1 1 BEARING, ROLLER, TAPERED, tapered roller, 3-15/64 inch O.D., separator housing front
34 533729R91 1 BEARING, tapered roller, 2 inch ID, separator housing front
35 194051C1 1 SEAL, oil, separator housing
36 191461C1 1 PULLEY, drive, 11 inch O.D., separator drive
37 192817C2 1 HUB, hex, 5/16 NC x 1 inch
38 1541765C1 1 BEARING, BALL, 4-23/32 inch O.D., standard drive shaft
38 1541766C1 1 BEARING, BALL, 4-23/32 inch O.D., optional drive shaft
39 100-22475 1 RING, SNAP, 4.78″, Int, #475
40 238-8260 1 O-RING, -260, Cl 8, 6.484″ ID x .139″ Thk
41 426-620 4 BOLT, Hex, 3/8″-16 x 1 1/4″, G8, Full Thd, BOLT hex, 3/8 NC x 1-1/4 inch, grade 8
43 192816C2 1 SHAFT, drive, PTO
44 100-12200 1 RING, SNAP, #200, Ext
45 126-176 1 KEY, WOODRUFF, #128, 5/16″ x 2 1/8″, HT, Drive shaft
46 173133C91 1 SEAL, shaft, 3-5/8 inch O.D., drive, pump housing end
47 173559C92 1 SEAL, shaft, 2-5/8 inch O.D., drive plate end
48 192275C1 1 COVER, housing
49 191830C2 1 GASKET, PTO cover
55 413-612 4 BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd, hex, 3/8 NC x 3/4 inch
56 492-11038 4 WASHER, LOCK, 3/8″
57 1315648C1 1 ROD, ROD snubber
58 413-824 1 BOLT, Hex, 1/2″-13 x 1 1/2″, G5, Full Thd, hex, 1/2 NC x 1-1/2 inch
59 425-108 1 NUT, 1/2″-13, G5
60 80679 1 WASHER, LOCK, 1/2″
61 425-1510 2 NUT, Jam, 5/8″-18, G5, Hex
62 107813R1 2 WASHER, flat, 21/32 x 2-1/2 x 11/64 inch
68 194915C2 1 ISOLATOR, INSULATOR engine snubber
69 232-46110 1 NUT, LOCK, 5/8″-11, GC
70 184429C2 1 DISC, CLUTCH, PLATE PTO drive
71 326-612 8 BOLT, Hex, 3/8″-16 x 3/4″, G8, Full Thd
72 392-21038 8 WASHER, LOCK, 3/8″, 3/8″
73 1324896C2 1 BUSHING, flywheel, power takeoff
76 413-1064 4 BOLT, Hex, 5/8″-11 x 4″, G5, hex, 5/8 NC x 4 inch
77 495-81027 6 WASHER, 21/32″ x 1 1/2″ x .120″, flat, 21/32 x 1-1/2 x 7/64 inch
78 425-1010 4 NUT, 5/8″-11, G5
79 413-1028 2 BOLT, Hex, 5/8″-11 x 1 3/4″, G5, hex, 5/8 NC x 1-3/4 inch
81 1303141C2 1 HOUSING, hydrostatic pump
82 413-820 3 BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd, hex, 1/2 NC x 1-1/4 inch
83 413-828 2 BOLT, Hex, 1/2″-13 x 1 3/4″, G5
84 283856C1 2 WASHER, flat, 17/32 x 1 x 3/16 inch
85 1330488C1 1 PULLEY, drive, auxiliary pump, 8.85 inch O.D.
86 426-840 3 BOLT, Hex, 1/2″-13 x 2 1/2″, G8, BOLT hex, 1/2 NC x 2-1/2 inch, grade 8
87 496-21053 3 WASHER, 17/32″ x 1 1/16″ x .134″, Hardened
88 217-44 1 REDUCER, 1/2″-14 NPTF x 3/8″-18 Fem NPTF, REDUCER 1/2 PT x 3/8 inch PT
89 301803R1 1 VALVE, SHUT-OFF, PTO drain
90 413-652 1 BOLT, Hex, 3/8″-16 x 3 1/4″, G5
91 413-660 1 BOLT, Hex, 3/8″-16 x 3 3/4″, G5, hex, 3/8 NC x 3-3/4 inch
92 425-106 2 NUT, 3/8″-16, G5
2 1343609C2 1 MOTOR, HYDRAULIC, ASSEMBLY hydrostatic, parts list Figures 6-26 thru 6-30
3 1979955C2 2 HOSE, 33-7/8 inch (860 mm) long, reverse pressure
4 238-6219 4 O-RING, -219, 90 Duro, 1.296″ ID x .139″ Thk
4 238-6018 2 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk, With power guide axle
5 1979929C1 1 TUBE, reverse pressure, not shown
5 1541757C2 1 PIPE, TUBE reverse pressure, with power guide axle
6 1347141C2 1 HOSE, 35 inch (889 mm) long, housing drain, lower
7 201-130 2 CONNECTOR, HYD., 1 7/16″-12 ORFS x 1 1/16″-12 ORB, ADAPTER straight, 1-7/16-12 face seal x
8 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
9 238-6021 1 O-RING, -021, 90 Duro, .926″ ID x .070″ Thk
10 201-313 1 ELBOW, 90є, 1 7/16″-12 x 1 1/16″-12, Adj, ORFS, 90 degree, 1-7/16-12 face seal x 1-1/16-12 inch adj
11 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
12 238-6021 1 O-RING, -021, 90 Duro, .926″ ID x .070″ Thk
13 1979932C1 1 PIPE, TUBE case drain
14 238-6021 2 O-RING, -021, 90 Duro, .926″ ID x .070″ Thk
15 1979936C1 1 HOSE, 16-1/2 inch (420 mm) long, housing drain, upper
16 1979953C3 1 HOSE, 27-7/8 inch (706 mm) long, forward lower pressure
17 238-6219 4 O-RING, -219, 90 Duro, 1.296″ ID x .139″ Thk
18 1979928C1 1 TUBE, forward pressure, not shown
18 1541756C2 1 PIPE, TUBE forward pressure, with power guide axle
19 1347124C2 1 HOSE, 21-5/8 inch (550 mm) long, forward pressure, upper
20 201-907 2 CAP, 1 3/16″-12 ORFS, If used, Includes Ref. 21
21 238-6018 1 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
22 1979941C1 1 SUPPORT, hydrostatic tube, rear
23 409-7616 6 BOLT, Hex Flg, 3/8″-16 x 1″, Serr
24 231-5146 6 NUT, Flg, USR, 3/8″-16
33 1347034C1 1 SUPPORT, BRACKET tube support, rear
34 1347033C1 1 SUPPORT, BRACKET tube support, front
35 1347156C1 6 SHIN, CLAMP half, tube
36 187935C1 9 STRIP, SLEEVE pressure tube clamp
37 413-516 6 BOLT, Hex, 5/16″-18 x 1″, G5, Full Thd, hex, 5/16 NC x 1 inch
38 425-105 6 NUT, 5/16″-18, G5
39 492-11031 6 WASHER, LOCK, 5/16″
40 1979761C1 6 SPACER, 3/8″ ID x 1
41 413-632 6 BOLT, Hex, 3/8″-16 x 2″, G5
42 231-5146 6 NUT, Flg, USR, 3/8″-16
43 S97224 16 CLAMP, CLAMP split flange, 1 inch
44 413-728 32 BOLT, Hex, 7/16″-14 x 1 3/4″, G5
45 492-11044 32 WASHER, LOCK, 7/16″
2 1343743C1 1 MOTOR, ASSEMBLY hydrostatic, parts list pages 6-32 thru 6-37A
3 1979955C2 2 HOSE, 33-7/8 inch (860 mm) long, reverse pressure
4 238-6219 4 O-RING, -219, 90 Duro, 1.296″ ID x .139″ Thk
4 238-6018 2 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk, With power guide axle
5 1979929C1 1 TUBE, reverse pressure, not shown
5 1541757C2 1 PIPE, TUBE reverse pressure, with power guide axle
6 1347141C2 1 HOSE, 35 inch (889 mm) long, housing drain, lower
7 201-130 2 CONNECTOR, HYD., 1 7/16″-12 ORFS x 1 1/16″-12 ORB, ADAPTER straight, 1-7/16-12 face seal x
8 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
9 238-6021 1 O-RING, -021, 90 Duro, .926″ ID x .070″ Thk
10 201-351 1 ELBOW, 45є, 1 7/16″-12 x 1 1/16″-12. Adj, ORFS, 45 degree, 1-7/16-12 face seal x 1-1/16-12 inch adj
11 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk, Includes: Ref. 11 and 12
12 238-6021 1 O-RING, -021, 90 Duro, .926″ ID x .070″ Thk
13 1979932C1 1 PIPE, TUBE case drain
14 238-6021 2 O-RING, -021, 90 Duro, .926″ ID x .070″ Thk
15 1979936C1 1 HOSE, 16-1/2 inch (420 mm) long, housing drain, upper
16 1979953C3 1 HOSE, 27-7/8 inch (706 mm) long, forward lower pressure
17 238-6219 4 O-RING, -219, 90 Duro, 1.296″ ID x .139″ Thk
18 1979928C1 1 TUBE, forward pressure, not shown
18 1541756C2 1 PIPE, TUBE forward pressure, with power guide axle
19 1347124C2 1 HOSE, 21-5/8 inch (550 mm) long, forward pressure, upper
20 1347126C1 1 HOSE, 167 inch (4250 mm) long, charge pressure
21 201-907 2 CAP, 1 3/16″-12 ORFS, If used, Includes Ref. 22
22 238-6018 1 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
23 201-100 1 CONNECTOR, HYD., 9/16″-18 ORFS x 7/16″-20 ORB, ADAPTER straight, 9/16-18 face seal x 7/16-20
24 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
25 238-6011 1 O-RING, -011, 90 Duro, .301″ ID x .070″ Thk
26 201-303 1 ELBOW, 90є, 9/16″-18 x 7/16″-20 Adj, ORFS, 90 degree, 9/16-18 face seal x 7/16-20 inch adj O-ring
27 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
28 238-6011 1 O-RING, -011, 90 Duro, .301″ ID x .070″ Thk
30 1979941C1 1 SUPPORT, hydrostatic tube, rear
31 409-7616 6 BOLT, Hex Flg, 3/8″-16 x 1″, Serr
32 231-5146 6 NUT, Flg, USR, 3/8″-16
33 1347034C1 1 SUPPORT, BRACKET tube support, rear
34 1347033C1 1 SUPPORT, BRACKET tube support, front
35 1347156C1 6 SHIN, CLAMP half, tube
36 187935C1 9 STRIP, SLEEVE pressure tube clamp
37 413-516 6 BOLT, Hex, 5/16″-18 x 1″, G5, Full Thd, hex, 5/16 NC x 1 inch
38 425-105 6 NUT, 5/16″-18, G5
39 492-11031 6 WASHER, LOCK, 5/16″
40 1979761C1 6 SPACER, 3/8″ ID x 1
41 413-632 6 BOLT, Hex, 3/8″-16 x 2″, G5
42 231-5146 6 NUT, Flg, USR, 3/8″-16
43 S97224 16 CLAMP, CLAMP split flange, 1 inch
44 413-728 32 BOLT, Hex, 7/16″-14 x 1 3/4″, G5
45 492-11044 32 WASHER, LOCK, 7/16″
1 863426R1 1 PAD, pedal
2 163425C1 1 PEDAL, Foot-N-Inch
3 1321960C92 1 SUPPORT, ASSEMBLY pedal, Includes: Ref. 4
4 1280291C1 2 BUSHING, 3/4 inch (19 mm) diameter, support assembly
5 1281794C1 1 PLATE, pivot shaft support
6 1281816C3 1 SUPPORT, pivot shaft
7 213-125 1 CLEVIS, ADJUSTABLE, 5/16″-24
8 398763R2 1 SPRING, pedal return
9 1321935C1 1 SEAL, pedal
11 1327764C1 1 SCREW, BOLT hex flange, polyseal, 3/8 NC x 1-1/4 inch
12 1327765C1 2 NUT, hex flange, self-locking, 3/8 inch NC
13 135270 2 BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″, slotted truss head, 5/16 NC x 3/4 inch
14 231-5145 4 NUT, Flg, USR, 5/16″-18
15 425-155 1 NUT, Jam, 5/16″-24, G5, Hex
16 327-5094 1 PIN, CLEVIS, 5/16″ x .940″, clevis, 5/16 x 15/16 inch
17 432-612 1 PIN, SPLIT (COTTER), 3/32″ x 3/4″
18 413-640 1 BOLT, Hex, 3/8″-16 x 2 1/2″, G5, hex, 3/8 NC x 2-1/2 inch
19 232-4136 2 NUT, LOCK, 3/8″-16, GC
20 413-632 1 BOLT, Hex, 3/8″-16 x 2″, G5
21 1330152C1 2 SCREW, Sltd Serr Truss Hd, 5/16″-18 x 3/4″
1 1986875C1 1 VALVE, ASSEMBLY Foot-N-Inch, 6000 psi, housing stamped 60-75, used with corn and grain units
1 1986876C1 1 VALVE, ASSEMBLY Foot-N-Inch, 6500 psi, housing stamped 65-76, used with rice units only
2 398709R2 1 SEAT, poppet valve
3 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
4 398710R1 1 POPPET, VALVE
6 539751R1 1 SPRING, poppet
7 398708R1 1 STOP, ROD poppet spring
8 398707R1 1 GUIDE, RETAINER oil seal
9 398701R91 1 SEAL, oil
10 237-6010 1 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
12 413-632 1 BOLT, Hex, 3/8″-16 x 2″, G5
13 231-5146 2 NUT, Flg, USR, 3/8″-16
14 201-411 1 TEE, 13/16″-16 ORFS x 13/16″-16 Sw Br, 13/16-16 inch swivel face branch x face x face, Includes:
15 238-6014 1 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
16 201-332 1 ELBOW, 90є, 13/16″-16 x 9/16″-18, Adj, ORFS, 90 degree, 13/16-16 face seal x 9/16-18 inch adj
17 237-6006 1 O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
18 1541795C1 1 TUBE, upper
19 1327829C1 1 PIPE, TUBE center, Foot-N-Inch valve
20 196764C1 1 TUBE ASSY., lower
21 218-591 1 TEE, 7/16″-20, 37є, TEE, 7/16-20 inch flare branch x flare x flare
22 175760C2 2 HOSE ASSY., 10 inch (254 mm) long
24 196517C1 1 SUPPORT, tube
25 409-7612 1 BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr
26 231-5146 1 NUT, Flg, USR, 3/8″-16
27 183820C1 1 CLAMP, tube
28 413-428 1 BOLT, Hex, 1/4″-20 x 1 3/4″, G5, hex, 1/4 NC x 1-3/4 inch
29 496-21028 1 WASHER, .281″ x 5/8″ x .075″, HDN, flat, 9/32 x 5/8 x 5/64 inch, hardened
30 231-5144 1 NUT, Flg, USR, 1/4″-20
31 196868C2 1 SUPPORT, PLATE
32 135270 1 BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″, slotted truss head, 5/16 NC x 3/4 inch
33 231-5145 1 NUT, Flg, USR, 5/16″-18
34 218-5478 1 TEE, 37є, 7/16″-20 x 7/16″-20, Fem Sw Run, TEE, 7/16-20 inch flare branch x flare x swivel
35 1541796C1 1 FITTING, CONNECTOR special, 7/16-20 fem x 9/16-18 inch female
36 1541849C1 1 COUPLING, ASSEMBLY diagnostic, Includes: Ref. 37 and 38
37 237-6006 1 O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
38 H434163 1 DUST CAP, dust, coupler
1 183508C94 1 LEVER, propulsion control
4 27-8343 1 PIN, CLEVIS, 1/2″ x 3 7/16′”, 1/2 x 3-7/16 inch, hardened
5 432-816 1 PIN, SPLIT (COTTER), 1/8″ x 1″
6 1301180C92 1 HANDLE, control, propulsion lever, Includes: Ref. 7
7 61-3068 3 SCREW, Hex Soc Hd, #6-32 x 1/2″, BOLT hex socket, No. 6 NC x 1/2 inch
8 1994832C1 1 SUPPORT, lever pivot, threaded bolt
9 1994977C1 1 WASHER, friction, special
10 1994980C1 5 WASHER, Belleville
11 496-81010 2 WASHER, flat, 15/32 x 1 x 7/64 inch, hardened
12 231-1447 1 NUT, LOCK, 7/16″-14, GB
13 198826C1 2 GROMMET, 3/4 inch ID, hydrostatic drive control cable
14 1339382C1 1 CABLE, control, hydrostatic drive
15 425-155 2 NUT, Jam, 5/16″-24, G5, Hex
16 213-125 2 CLEVIS, ADJUSTABLE, 5/16″-24
17 427-5094 2 PIN, CLEVIS, 5/16″ x .940″, Hardened
18 432-612 2 PIN, SPLIT (COTTER), 3/32″ x 3/4″
19 193281C1 1 ANGLE, control cable mounting
20 135270 2 BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″, slotted truss head, 5/16 NC x 3/4 inch
21 231-5145 2 NUT, Flg, USR, 5/16″-18
22 195593C1 1 CLAMP, control cable
23 937875R1 2 SCREW, Sltd Serr Truss Hd, 1/4″-20 x 3/4″, slotted truss head, 1/4 NC x 3/4 inch
24 231-5144 2 NUT, Flg, USR, 1/4″-20
25 362666R1 1 CLIP, CLAMP retaining, cable
26 159688R91 1 BEARING, THRUST, pivot support
27 1994779C1 1 LEVER, control, pump
28 493-41033 1 WASHER, LOCK, Ext Tooth, 5/16″, external tooth lock, 5/16 inch
29 425-105 1 NUT, 5/16″-18, G5
30 1994757C1 1 SUPPORT, BRACKET cable to pump
31 492-11044 2 WASHER, LOCK, 7/16″
1 1343716C2 1 HYDROSTATIC PUMP, ASSEMBLY new, corn and grain, parts list figures 6-16 thru 6-24
1 108113A1 1 HYDROSTATIC PUMP, ASSEMBLY new, rice, parts list Figs. 6-16 thru 6-22 and 6-25A
1 108113A1C 1 CORE-INJECTION PUMP, RETURN NUMBER use this part number to return pump assembly core for
2 413-556 4 BOLT, Hex, 5/16″-18 x 3 1/2″, G5, BOLT hex, 5/16 NC x 3-1/2 inch
3 92740C1 1 PUMP, ASSEMBLY charge, corn and grain, parts list Fig. 6-24
3 107593A2 1 PUMP, ASSEMBLY charge, rice, parts list Fig. 6-25A
4 133760C2 1 GASKET, charge pump
5 140754C1 5 PIN, dowel, 5/16 x 5/8 inch
7 142398C91 1 KIT, SHIM, KIT end cover, Includes: Ref. 7
8 92741C2 1 GASKET, end cover
9 461-3086 6 SCREW, Hex Soc Hd, #8-32 x 3/8″, BOLT hex socket, No. 8 NC x 3/8 inch
10 142408C1 2 RETAINER, servo
12 278548 1 PLUG, Hex Soc, 7/16″-20 ORB, Incl. Ref. 13
13 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
14 9672438 1 PLUG, Hex Hd, 7/16″-20 ORB, Incl. Ref. 15
15 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
16 142386C91 1 KIT, SHIM, KIT trunnion bearing, Includes: Ref. 16
17 238-5234 2 O-RING, -234, 70 Duro, 2.984″ ID x .139″ Thk
19 413-714 6 BOLT, Hex, 7/16″-14 x 7/8″, G5, Full Thd, BOLT hex, 7/16 NC x 7/8 inch
20 142407C2 2 KIT, SLEEVE servo
21 238-5237 2 O-RING, -237, 70 Duro, 3.359″ ID x .139″ Thk
22 238-5234 2 O-RING, -234, 70 Duro, 2.984″ ID x .139″ Thk, Servo sleeve
23 224669C91 2 PISTON, servo, Includes: Ref. 24 thru 59
31 413-748 6 BOLT, Hex, 7/16″-14 x 3″, G5, BOLT hex, 7/16 NC x 3 inch
32 140769C1 2 VALVE, CHECK, ASSEMBLY, Includes: Ref. 33 and 34
33 140770C1 1 RING, backup, check valve
34 238-6113 1 O-RING, -113, 90 Duro, .549″ ID x .103″ Thk
35 1980171C1 1 HOUSING, PLATE swash
36 140766C1 2 PIN, pivot, servo linkage
37 142408C1 4 RETAINER, servo, linkage pin
41 133756C1 1 GASKET, control valve
42 133755C94 1 VALVE, ASSEMBLY control, parts list Fig. 6-22
43 413-528 2 BOLT, Hex, 5/16″-18 x 1 3/4″, G5, hex, 5/16 NC x 1-3/4 inch
44 413-516 4 BOLT, Hex, 5/16″-18 x 1″, G5, Full Thd, hex, 5/16 NC x 1 inch
45 1346255C1 1 PLATE, valve, pump
52 140754C1 7 PIN, dowel, 5/16 x 5/8 inch
53 1980169C1 1 SHAFT, input, Includes: Ref. 54
55 142399C1 1 GASKET, mounting flange
57 413-720 12 BOLT, Hex, 7/16″-14 x 1 1/4″, G5, BOLT hex, 7/16 NC x 1-1/4 inch
58 1346205C1 1 KIT, GASKET, SEAL shaft, three-piece
59 426-732 2 BOLT, Hex, 7/16″-14 x 2″, G8, BOLT hex, 7/16 NC x 2 inch, grade 8
60 56694H 1 BEARING, CONE, tapered roller, input shaft
61 ST863 1 BEARING, CUP, tapered roller, input shaft
62 399933C91 2 BEARING, CONE, tapered roller, 1-25/32 inch ID, trunnion
63 399934C1 2 BEARING, CUP, tapered roller, 2-57/64 inch O.D., trunnion
64 400983R91 1 BEARING, CONE, tapered roller, 1-3/16 inch ID, input shaft
65 530741R1 1 BEARING, CUP, tapered roller, 2-17/32 inch O.D., input shaft
67 237-6010 1 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
75 237-6006 1 O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
76 80369C1 1 PLATE, thrust
78 413-832 4 BOLT, Hex, 1/2″-13 x 2″, G5, hex, 1/2 NC x 2 inch
79 186852C1 4 NUT, hex, self-locking, special, 1/2 inch NC, grade 8
2 9625178 2 PLUG, Hex Soc, 9/16″-18 ORB, Incl. Ref. 3
4 1978048C2 1 SHAFT, ASSEMBLY valve, control, Includes: Ref. 5 and 6
5 238-5012 1 O-RING, -012, 70 Duro, .364″ ID x .070″ Thk
6 1267111C1 1 RING, SEAL shaft, if used
7 80269C1 1 RING, O-RING 5/8 ID x 1/16 inch wide, not included with valve assembly
8 133756C1 1 GASKET, control valve
9 404782R2 1 HANDLE, control valve shaft
10 493-11033 1 WASHER, LOCK, Ext-Int Tooth, 5/16″
11 425-145 1 NUT, Jam, 5/16″-18, G5, hex, jam, 5/16 inch NC
12 326-528 2 BOLT, Hex, 5/16″-18 x 1 3/4″, G8
13 413-516 4 BOLT, Hex, 5/16″-18 x 1″, G5, Full Thd, hex, 5/16 NC x 1 inch
14 1272750C1 1 ORIFICE, 0.057 inch, control valve
15 238-5012 1 O-RING, -012, 70 Duro, .364″ ID x .070″ Thk
3 237-6006 1 O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
1 133760C2 1 GASKET, charge pump
2 238-5041 2 O-RING, -041, 70 Duro, 2.989″ ID x .070″ Thk
3 140764C1 2 LINK, PIN dowel, 5/16 x 5/8 inch
4 140771C1 1 VALVE, relief, low pressure
5 393885R91 1 KIT, GASKET, relief valve seal, Includes: Ref. 6, 7, and 8
6 237-6014 1 O-RING, 14-1, 90 Duro, 1.048″ ID x .118″ Thk
7 393887R1 2 BACK-UP RING
8 238-6117 1 O-RING, -117, 90 Duro, .799″ ID x .103″ Thk
10 9672438 1 PLUG, Hex Hd, 7/16″-20 ORB, Incl. Ref. 10A
11 413-556 4 BOLT, Hex, 5/16″-18 x 3 1/2″, G5, BOLT hex, 5/16 NC x 3-1/2 inch
2 133760C2 1 GASKET, charge pump
3 140754C1 2 PIN, dowel, 5/16 x 5/8 inch
5 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
6 237-6014 1 O-RING, 14-1, 90 Duro, 1.048″ ID x .118″ Thk
7 238-6117 1 O-RING, -117, 90 Duro, .799″ ID x .103″ Thk
8 9672438 1 PLUG, Hex Hd, 7/16″-20 ORB, Tube, Incl. Ref. 8A
9 86512512 1 PLUG, Hex Hd, 7/8″-14 ORB, Incl. Ref. 10
10 237-6010 1 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
11 326-564 4 BOLT, Hex, 5/16″-18 x 4″, G8
11 326-536 2 BOLT, Hex, 5/16″-18 x 2 1/4″, G8
1 1343609C2 1 MOTOR, HYDRAULIC, ASSY. hydrostatic, new, parts list Figs. 6-26 thru 6-30, Includes: Ref. 2 thru 50
2 1346205C1 1 KIT, GASKET, SEAL shaft, three-piece
10 1971432C2 1 VALVE, BLOCK ASSY. relief, parts list Fig. 6-30
15 413-664 4 BOLT, Hex, 3/8″-16 x 4″, G5, hex, 3/8 NC x 4 inch
16 37-1516 1 DOWEL, 5/16″ x 1″, PIN hardened, 5/16 x 1 inch
17 217-430 1 PLUG, Hex Soc, 1/8″-27
18 218-5158 1 PLUG, Hex Hd, 1 1/16″-12 ORB, hex, 1-1/16-12 inch O-ring boss, Includes: Ref. 19
19 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
20 ST863 1 BEARING, CUP, tapered roller, output shaft
21 56694H 1 BEARING, CONE, tapered roller, output shaft
22 1980137C1 1 SHAFT, ASSY. output
31 140754C1 2 PIN, dowel, 5/16 x 5/8 inch
36 1980139C1 1 PLATE, valve
37 140754C1 3 PIN, dowel, 5/16 x 5/8 inch
38 1980140C1 1 GASKET, end cover
39 413-732 2 BOLT, Hex, 7/16″-14 x 2″, G5, BOLT hex, 7/16 NC x 2 inch
40 413-748 6 BOLT, Hex, 7/16″-14 x 3″, G5, BOLT hex, 7/16 NC x 3 inch
41 400983R91 1 BEARING, CONE, tapered roller, 1-3/16 inch ID, output shaft
42 530741R1 1 BEARING, CUP, tapered roller, 2-17/32 inch O.D., output shaft
49 61-33148 2 SCREW, Hex Soc Hd, 5/16″-18 x 3″, BOLT hex socket, 5/16 NC x 3 inch
50 92734C1 1 WASHER, sealing
56 413-824 4 BOLT, Hex, 1/2″-13 x 1 1/2″, G5, Full Thd, hex, 1/2 NC x 1-1/2 inch
56 413-828 4 BOLT, Hex, 1/2″-13 x 1 3/4″, G5
57 80679 4 WASHER, LOCK, 1/2″
58 283856C1 4 WASHER, flat, 17/32 x 1 x 3/16 inch
59 166506C1 1 GASKET, mounting
6 237-6014 1 O-RING, 14-1, 90 Duro, 1.048″ ID x .118″ Thk
7 393887R1 2 BACK-UP RING
8 238-6117 1 O-RING, -117, 90 Duro, .799″ ID x .103″ Thk
11 237-6010 2 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
12 145560C1 2 SPRING, shuttle valve
15 140761C1 1 VALVE, PRESSURE RELIEF, ASSEMBLY low
23 413-664 4 BOLT, Hex, 3/8″-16 x 4″, G5, hex, 3/8 NC x 4 inch
2 1346205C1 1 KIT, GASKET, SEAL shaft, three-piece
10 ST863 1 BEARING, CUP, tapered roller, housing
11 56694H 1 BEARING, CONE, tapered roller, input shaft
12 142399C1 1 GASKET, mounting flange
13 1980137C1 1 SHAFT, ASSEMBLY output
14 142408C1 4 RETAINER, servo
15 140766C1 2 PIN, pivot, linkage
16 1980174C1 1 HOUSING, PLATE swash, variable
27 140754C1 2 PIN, dowel, 5/16 x 5/8 inch
30 1980139C1 1 PLATE, valve
31 140754C1 1 PIN, dowel, 5/16 x 5/8 inch
33 142408C1 2 RETAINER, servo
34 461-3086 6 SCREW, Hex Soc Hd, #8-32 x 3/8″, BOLT hex socket, No. 8 NC x 3/8 inch
50 142407C1 2 KIT, SLEEVE servo
51 238-5237 2 O-RING, -237, 70 Duro, 3.359″ ID x .139″ Thk
52 238-5234 2 O-RING, -234, 70 Duro, 2.984″ ID x .139″ Thk
56 413-720 12 BOLT, Hex, 7/16″-14 x 1 1/4″, G5, BOLT hex, 7/16 NC x 1-1/4 inch
57 166506C1 1 GASKET, mounting
58 413-828 4 BOLT, Hex, 1/2″-13 x 1 3/4″, G5
59 80679 4 WASHER, LOCK, 1/2″
60 283856C1 4 WASHER, flat, 17/32 x 1 x 3/16 inch
62 145337C1 1 GASKET, control valve
63 413-528 6 BOLT, Hex, 5/16″-18 x 1 3/4″, G5, hex, 5/16 NC x 1-3/4 inch
64 218-5133 1 ELBOW, 45є, 7/16″-20, 37є x 7/16″-20, O-Ring, ELBOW 45 degree, 7/16-20 inch flare x adj O-ring boss
65 218-5103 3 ELBOW, 90є, 7/16″-20, 37є x 7/16″-20, O-Ring, 90 degree, 7/16-20 inch flare x adj O-ring boss
66 175760C1 2 HOSE ASSY., 10 inch (254 mm) long, valve to block
67 237-6004 2 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk
70 140747C92 1 KIT, SEALS, KIT valve block seal, valve block parts list Fig. 6-37A
72 140769C1 2 VALVE, CHECK, ASSEMBLY
73 238-6113 2 O-RING, -113, 90 Duro, .549″ ID x .103″ Thk
74 140770C1 2 RING, backup, check valve
76 413-732 2 BOLT, Hex, 7/16″-14 x 2″, G5, BOLT hex, 7/16 NC x 2 inch
77 413-748 6 BOLT, Hex, 7/16″-14 x 3″, G5, BOLT hex, 7/16 NC x 3 inch
79 530741R1 1 BEARING, CUP, tapered roller, 2-17/32 inch O.D., input shaft
80 400983R91 1 BEARING, CONE, tapered roller, 1-3/16 inch ID, input shaft
81 140756C2 1 GASKET, end cover
83 399934C1 2 BEARING, CUP, tapered roller, 2-57/64 inch O.D., trunnion
84 399933C91 2 BEARING, CONE, tapered roller, 1-25/32 inch ID, trunnion
86 238-5234 2 O-RING, -234, 70 Duro, 2.984″ ID x .139″ Thk
88 413-714 6 BOLT, Hex, 7/16″-14 x 7/8″, G5, Full Thd, BOLT hex, 7/16 NC x 7/8 inch
89 218-5158 1 PLUG, Hex Hd, 1 1/16″-12 ORB, hex, 1-1/16-12 inch O-ring boss, Includes: Ref. 90
90 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
91 278548 1 PLUG, Hex Soc, 7/16″-20 ORB, Not shown
92 237-6004 1 O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk, Not shown
1 1272954C1 2 GASKET, valve body, control block, Part of control valve body plug kit 92649C1
2 145338C2 1 SOLENOID, control valve, Includes: Ref. 3 and 4
3 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
4 238-5012 1 O-RING, -012, 70 Duro, .364″ ID x .070″ Thk
5 92647C1 1 O-RING, retaining, orifice
7 145337C1 1 GASKET, control valve
6 237-6014 1 O-RING, 14-1, 90 Duro, 1.048″ ID x .118″ Thk
7 393887R1 2 BACK-UP RING
8 238-6117 1 O-RING, -117, 90 Duro, .799″ ID x .103″ Thk
11 237-6010 2 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
12 145560C1 2 SPRING, shuttle valve
15 140761C1 1 VALVE, PRESSURE RELIEF, ASSEMBLY low
23 413-664 4 BOLT, Hex, 3/8″-16 x 4″, G5, hex, 3/8 NC x 4 inch
1 224865C1 1 LEVER, gear shift
2 439-5840 1 PIN, HEADED, 1/2″ x 2 1/2″, 1/2 x 2-1/2 inch
3 432-1216 1 PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″
4 193194C2 1 HANDLE, GRIP lever, hand control
5 1321289C3 1 CABLE, transmission linkage
6 17045R1 2 PIN, LOCK, 5/32″ x 1 3/8″, Slotted
7 495-81112 3 WASHER, .344″ x 3/4″ x .120″, flat, 11/32 x 3/4 x 7/64 inch
8 194445C1 1 ROD, spring anchor
9 432-812 1 PIN, SPLIT (COTTER), 1/8″ x 3/4″
10 47822D 1 SPRING, shifting retractor
11 1276181C1 1 BRACKET, SUPPORT gear shift
12 A63366 4 BEARING, pivot
13 135270 8 BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″, slotted truss head, 5/16 NC x 3/4 inch
14 231-5145 8 NUT, Flg, USR, 5/16″-18
15 1329390C1 1 CABLE ASSY., control, shift rail
16 213-126 2 CLEVIS, ADJUSTABLE, 3/8″-24 x 2 1/2″, adjustable, 3/8 inch NF
17 425-156 2 NUT, Jam, 3/8″-24, G5
18 427-6106 2 PIN, CLEVIS, 3/8″ x 1 1/16″, Hardened
19 432-612 3 PIN, SPLIT (COTTER), 3/32″ x 3/4″
20 194442C1 1 SUPPORT ASSY., shift linkage
21 413-620 3 BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd, hex, 3/8 NC x 1-1/4 inch
22 492-11038 3 WASHER, LOCK, 3/8″
23 495-11041 3 WASHER, 3/8″, SAE, Flat, (13/32 x 13/16 x 1/16″)
24 194439C1 1 LEVER ASSY., shift, lower
25 194437C1 1 LINK, shift rail control
26 195108C2 1 PIN, LARGE, pivot, shift plug
27 432-824 1 PIN, SPLIT (COTTER), 1/8″ x 1 1/2″
28 192689C1 2 PIN, shift rail extension
29 138-2053 2 PIN, 1/4″ x 1 1/4″, Coiled
30 196511C1 1 PLATE, LARGE, SUPPORT cable nut
32 1310827C2 1 SWITCH, lockout, third gear, parts list Fig. 4-10, For use on combines with two-speed propulsion motor
33 470-10620 2 SCREW, Slotted Pan Hd, #6-32 x 1 1/4″, machine, pan head slotted, No. 6 NC x 1-1/4 inch
34 95-81108 2 WASHER, #6, flat, 5/32 x 3/8 x 3/64 inch
35 138526 2 WASHER, internal tooth lock, special, No. 6
36 225-14106 2 NUT, #6-32
1 401873R2 1 HOUSING, transmission
2 426-1024 4 BOLT, Hex, 5/8″-11 x 1 1/2″, G8, Full Thd, BOLT hex, 5/8 NC x 1-1/2 in., grade 8
3 392-21062 4 WASHER, LOCK, 5/8″, 5/8″
4 221-887 1 PLUG, square socket, drain, magnetic, 3/4 in. PT
5 217-442 1 PLUG, Hex Soc, 3/4″-14, hex socket, 3/4 in. PT
6 184167C1 1 COVER ASSY, transmission housing
7 401860R1 1 GASKET, housing cover
8 413-612 15 BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd, hex, 3/8 NC x 3/4 in.
9 404085R1 1 GEAR, driven, 66 teeth
12 361061R3 4 PINION, GEAR, differential, 15 teeth
13 404084R1 2 PINION, GEAR bevel, differential, 28 teeth
14 393637R2 1 SPIDER, DIFF.
15 404171R2 12 SCREW, BOLT special, differential housing
16 29-218 12 NUT, 1/2″-20, G8, Hvy, hex, 1/2 in. NF, grade 8
17 ST2096 2 BEARING, CONE, tapered roller, differential
18 ST981 2 BEARING SET, tapered roller, differential
19 100-21393 2 RING, SNAP, 3.938″, Int, #393
21 ST265 2 BEARING, BALL, ball, differential shaft
22 358059R1 2 RING, SNAP, snap, bearing
23 184341C1 4 SLEEVE, COUPLING ASSY., axle drive shaft, assembly axle, Replaced by 184341C2, Includes: Ref. 2
24 219-14 1 NIPPLE, LUBE, 1/4″ x .56″ lg, Drive, grease, straight, 1/4 drive type x 9/16 in.
25 27653R1 4 BOLT, Hex, 3/8″-16 x 3 1/2″, G8, BOLT hex, 3/8 NC x 3-1/2 in., grade 8
26 654049R1 4 NUT, hex, self locking, 3/8 in. NC
27 21864R1 4 PIN, retaining, S type
28 1309012C1 1 SHAFT, final drive, left hand
28 402725R2 1 SHAFT, final drive, right hand
29 221-1114 1 NIPPLE, LUBE, 1/8″ NPT x 4 1/2″
30 144098 1 REDUCER, COUPLING, 1/4 PT to 1/8 in. PT
31 61991R91 1 BREATHER, 1/8″-27 NPT, Short, w/washer, FITTING housing, 1/8 in. PT
32 574273R91 2 BEARING, ball, housing cover
33 184131C1 2 RING, SNAP, #393, 4.234″, Int, bearing retaining
34 1342912C1 2 SHAFT, differential
1 401873R2 1 HOUSING, transmission
2 188893C1 1 CAGE, HOUSING bearing, left hand
3 530704R2 1 WASHER, thrust
4 131312C1 1 BEARING, CUP, tapered roller, left hand pinion shaft, 2-27/32 in. O.D.
5 871244R1 1 BEARING, CONE, tapered roller, left hand pinion shaft
6 238-5240 2 O-RING, -240, 70 Duro, 3.734″ ID x .139″ Thk
7 A61415 2 BEARING, NEEDLE, needle, spool gear
8 530699R1 1 PINION, GEAR, spool, 59, 39 and 27 teeth
9 401879R1 1 SPACER, spool gear
10 196693H1 2 RING, snap, change gear
12 401878R1 1 PINION, SHAFT, 14 teeth
11 1349043C1 1 GEAR, driven, 34 teeth, corn and grain combine
11 1349045C1 1 PINION, GEAR driven, 38 teeth, rice combine
13 ST791 1 BEARING, CONE, tapered roller, right hand pinion shaft
14 ST951 1 BEARING, CUP, tapered roller, right hand pinion shaft
16 403363R1 1 HOUSING, CAGE bearing, right hand
17 413-622 3 BOLT, Hex, 3/8″-16 x 1 3/8″, G5, BOLT hex, 3/8 NC x 1-3/8 in.
18 413-620 3 BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd, hex, 3/8 NC x 1-1/4 in.
2 180944C1 1 HOUSING ASSY., input shaft
3 573985R1 2 SET SCREW, Sq Hd, 3/8″-24 x 1″, set, shifter fork, 3/8 NF x 1 in.
4 R21491 1 BEARING, NEEDLE, needle, input shaft, 1-3/4 in. ID
5 238-5348 1 O-RING, -348, 70 Duro, 4.35″ ID x .210″ Thk
6 130503H 1 BEARING, CUP, tapered roller, input shaft, 3-17/64 in. O.D.
7 300426R91 1 BEARING, CONE, tapered roller, input shaft, 1-25/32 in. ID
8 401890R1 1 SHAFT, gear, input pinion, 26 teeth
9 76349 2 PLUG, Hex Hd, 9/16″-18 ORB, Incl. Ref. 10
11 64600C1 2 SPRING, shifter detent
12 211-1016 2 BALL, 1/2″ Dia, Chrome alloy steel, grade 24
13 211-1014 2 BALL, 7/16″ Dia, chrome alloy steel, shifter detent, grade 24
14 50213V 1 BEARING, CUP, tapered roller, left hand drive shaft, 2-3/4 in. O.D.
15 50212VA 1 BEARING, CONE, tapered roller, lrft hand drive shaft, 1-5/16 in. ID
16 530700R1 1 GEAR, second and third sliding, 26 and 46 teeth
17 401889R1 1 GEAR, first sliding, 58 teeth
18 1349042C1 1 SHAFT, drive, 38 teeth, gear, corn and grain combine
18 1349044C1 1 SHAFT, drive, 34 teeth, rice combine
19 290099C91 1 BEARING, CONE, tapered roller, right hand drive shaft, 2-7/8 in. O.D.
20 290100C1 1 BEARING, CUP, tapered roller, right hand drive shaft, 1-9/16 in. ID
21 238-5240 1 O-RING, -240, 70 Duro, 3.734″ ID x .139″ Thk
23 130791C1 1 CAP, bearing retainer
24 38-31624 3 PIN, ROLL, 1/4″ x 1 1/2″, Coiled
25 G10450 4 SEAL, oil, shifter rail
26 121658C4 1 SHAFT, second and third gear shifter
27 121659C2 1 SHAFT, first gear shifter
28 401897R2 2 FORK, gear shifter
29 425-156 2 NUT, Jam, 3/8″-24, G5
30 413-622 3 BOLT, Hex, 3/8″-16 x 1 3/8″, G5, BOLT hex, 3/8 NC x 1-3/8 in.
31 413-616 4 BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd, BOLT hex, 3/8 NC x 1 in.
10 237-6006 1 O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk
1 1302712C1 1 AXLE, drive, without gussets, axle
1 175916A1 1 AXLE, drive, axle
1 184451C2 1 AXLE, drive, with gussets, included in kit 128264A1 see below , Part includes gusset kit, two front post
2 177336C1 2 COVER, end plate, axle
3 163909C1 4 BUSHING, tapered, end plate, drive axle
5 426-1020 22 BOLT, Hex, 5/8″-11 x 1 1/4″, G8, Full Thd, hex, 5/8 NC x 1-1/4 in., grade 8, drive axle
6 495-81030 14 WASHER, 21/32″ x 2″ x .179″, flat, 21/32 x 2 x 11/64 in., drive axle
7 232-51310 30 NUT, Flg, USR, 5/8″-12, hex, serrated flange, 5/8 in. NC, grade 8, drive axle
9 326-1024 8 BOLT, Hex, 5/8″-11 x 1 1/2″, G8, Full Thd, Drive axle
10 396-41066 4 WASHER, 21/32″ x 1 1/2″ x .188″, HDN, flat, 21/32 x 1-1/2 x 3/16 in. hardened, drive axle
11 169256C2 12 WASHER, flat, special, 41/64 x 1-1/4 x 18 in., drive axle
21 177345C3 2 EXTENSION, drive axle, 6 in., axle extension, single wheel short extension
22 163909C1 8 BUSHING, tapered, end plate, axle extension, single wheel short extension
23 184223C1 1 SHAFT, axle, left hand, axle extension, single wheel short extension
23 184224C1 1 SHAFT, axle, right hand, axle extension, single wheel short extension
24 326-1236 12 BOLT, Hex, 3/4″-10 x 2 1/4″, G8, Axle extension, single wheel short extension
25 426-1244 4 BOLT, Hex, 3/4″-10 x 2 3/4″, G8, hex, 3/4 NC x 2-3/4 in., grade 8, axle extension, single wheel short
26 492-11075 16 WASHER, LOCK, 3/4″, 3/4″, axle extension, single wheel, short extension
27 496-11081 8 WASHER, 13/16″ x 1 1/2″ x .065″, HDN, flat, hardened, 13/16 x 1-1/2 x 9/64 in., axle extension, single
28 429-1012 16 NUT, 3/4″-10, G8, hex, 3/4 in. NC, grade 8, axle extension, single wheel short extension
1 184364C1 1 EXTENSION, AXLE, left hand
1 184365C1 1 EXTENSION, AXLE, right hand
2 163909C1 8 BUSHING, tapered, end plate
3 184375C1 1 SHAFT, axle drive, left hand
3 184376C1 1 SHAFT, axle drive, right hand
4 426-1236 12 BOLT, Hex, 3/4″-10 x 2 1/4″, G8, BOLT hex, 3/4 NC x 2-1/4 in., grade 8
5 426-1240 4 BOLT, Hex, 3/4″-10 x 2 1/2″, G8, BOLT hex, 3/4 NC x 2-1/2 in., grade 8
6 492-11075 16 WASHER, LOCK, 3/4″, 3/4″
7 496-11081 8 WASHER, 13/16″ x 1 1/2″ x .065″, HDN, flat, hardened, 13/16 x 1-1/2 x 9/64 in.
8 429-1012 16 NUT, 3/4″-10, G8, hex, 3/4 in. NC, grade 8
10 184358C1 1 ROD, reinforcement, extension
11 232-41320 4 NUT, LOCK, 1 1/4″-7, GC
1 86851C2 1 HOUSING, final drive
2 217-442 2 PLUG, Hex Soc, 3/4″-14, hex socket, 3/4 in. PT
3 86839C2 1 COVER, housing
4 326-824 12 BOLT, Hex, 1/2″-13 x 1 1/2″, G8, Full Thd
4 326-620 6 BOLT, Hex, 3/8″-16 x 1 1/4″, G8, Full Thd
6 396-21053 12 WASHER, 17/32″ x 1 1/16″ x .134″, Hardened
6 396-21041 6 WASHER, 13/32″ x 13/16″ x .09″, HDN, flat, hardened, 13/32 x 13/16 x 3/32 in.
7 1315484C91 1 SHAFT, ASSY., drive, final, Includes: Ref. 8
8 565130R3 10 BOLT, wheel, standard wheels only
11 401905R91 1 SEAL, oil, outer bearing
12 283445C91 1 BEARING, ASSY., two piece, includes bearing and cup, outer
15 130809C1 1 SPACER, gear
16 1342906C1 1 GEAR, drive, 75 teeth
17 130808C1 1 SPACER, gear
18 66116R91 1 BEARING, ASSY., two piece, includes bearing and cup, inner
21 403896R1 1 DISC, WASHER final drive
22 147030R1 1 NUT, hex, slotted, special, shaft retaining
23 432-840 1 PIN, SPLIT (COTTER), 1/8″ x 2 1/2″, 1/8″ x 2 1/2″, no longer used, order Ref. 23A 1997637C1
24 403895R1 1 COVER, CAP main shaft
25 401911R91 1 BEARING, CONE, tapered roller, 1-3/4 in. ID, outer
26 61012R1 1 BEARING SET, tapered roller, 3-11/16 in. O.D., outer
27 1342907C1 1 SHAFT, pinion
28 196454C91 1 BEARING, tapered roller, 2-1/4 in. ID, inner
29 360325R1 1 BEARING SET, tapered roller, 4-1/8 in. ID, inner
30 94649C2 1 CAGE, inner bearing
32 401914R91 1 SEAL, oil, double lip, cage
33 326-628 3 BOLT, Hex, 3/8″-16 x 1 3/4″, G8, hex, 3/8 NC x 1-3/4 in., grade 8
35 426-1232 10 BOLT, Hex, 3/4″-10 x 2″, G8, hex, 3/4 NC x 2 in., grade 8
36 392-21075 14 WASHER, LOCK, 3/4″, 3/4″
37 326-1236 4 BOLT, Hex, 3/4″-10 x 2 1/4″, G8
38 496-11081 4 WASHER, 13/16″ x 1 1/2″ x .065″, HDN, flat, hardened, 13/16 x 1-1/2 x 9/64 in.
39 163909C1 4 BUSHING, tapered, end plate
40 141621 1 ELBOW, 90є, 3/4″ NPT Street, 90 deg., 3/4 male x 3/4 PT female, rice only
41 221-90 2 REDUCER, Hex, 3/4″ x 1/8″ NPT, REDUCER pipe, 3/4 male x 1/8 in. female
42 61991R91 2 BREATHER, 1/8″-27 NPT, Short, w/washer, FITTING housing, 1/8 in. PT
43 184341C1 2 SLEEVE, COUPLING ASSY., axle drive shaft, replaced by 184341C2
44 219-14 2 NIPPLE, LUBE, 1/4″ x .56″ lg, Drive, grease stright, 1/4 drive type x 9/16 in.
45 113-2293 2 BOLT, Hex, 3/8″-16 x 3 1/2″, G8
46 21864R1 2 PIN, retaining, S type
47 654049R1 2 NUT, hex, self locking, 3/8 in. NC
49 1309012C1 1 SHAFT, final drive, left hand
49 402725R2 1 SHAFT, final drive, right hand
1 196197C3 2 WHEEL ASSY., drive, 28L x 26 in. tire, drive wheels and spacers
2 184480C2 2 WHEEL ASSY., drive, 30.5L x 32 in. tire, drive wheels and spacers
4 184482C2 2 WHEEL ASSY., drive, 234.5 x 32 in. tire, drive wheels and spacers
8 429-1112 20 NUT, 3/4″-16, G5, hex, 3/4 in. NF, grade 8, drive wheels and spacers
9 396-31081 20 WASHER, 13/16″ x 1 1/2″ x .219″, HDN, Not used with spacer, drive wheels and spacers
9 184403C1 20 SPACER, flat, 13/16 x 2 x 3/8 in. used with drive axle extension, drive wheels and spacers
13 417194C1 2 PLUG, valve hole, for tubeless tire, drive wheels and spacers
13 383697R1 2 PLUG, valve hole, for tube type tire, drive wheels and spacers
14 179482C1 2 VALVE STEM, inflation, 7/16 in. dia., drive wheels and spacers
15 407184C1 2 VALVE STEM, CORE inflation, drive wheels and spacers
22 184352C1 4 RIM, drive, dual 18.4 x 38 in. tire, dual wheel
22 184458C1 4 RIM, drive, dual, 18.4 x 42 in. tire, dual wheel
22 184456C1 4 RIM, drive, dual, 20.8 x 42 in. tire, dual wheel
23 184430C1 20 BOLT, wheel, dual wheel
24 329-1512 10 NUT, Jam, 3/4″-10, G8, Dual wheel
25 184403C1 20 SPACER, flat, 13/16 x 2 x 3/8 in., dual wheel
26 429-1112 20 NUT, 3/4″-16, G5, hex, 3/4 in. NF, grade 8, dual wheel
1 863426R1 2 PAD, pedal brake
2 1321926C1 1 PEDAL, brake, left hand
3 1321927C1 1 PEDAL, brake, right hand
4 614251R1 1 BAR, brake locking
5 1321925C91 2 SUPPORT, ASSY., brake pedal, Includes: Ref. 6
6 1280291C1 2 BUSHING, support assembly pedal
7 1280117C1 1 SHAFT, support pivot
8 1281794C1 2 PLATE, pivot shaft support
9 182652A1 2 SPRING, pedal return
10 1280116C1 1 SPACER, support pivot
11 1321383C1 1 ANGLE, support pivot shaft
12 1327560C1 1 ANGLE, spring hook
13 1281882C2 2 LINK ASSY., brake
14 1321935C1 2 SEAL, pedal
15 1327764C1 2 SCREW, BOLT, hex flange, polyseal, 3/8 NC x 1-1/4 in.
16 1327765C1 2 NUT, hex flange, self locking, 3/8 in. NC
17 19938R1 1 PIN, 1/8″ x 7/8″, Coiled, 1/8″ x 7/8″, Coiled
18 477-73112 9 BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
19 231-5145 13 NUT, Flg, USR, 5/16″-18
20 413-532 2 BOLT, Hex, 5/16″-18 x 2″, G5
21 829-1310 2 NUT, M10, Cl 10, Hex
22 427-6106 2 PIN, CLEVIS, 3/8″ x 1 1/16″, Hardened
23 432-612 2 PIN, SPLIT (COTTER), 3/32″ x 3/4″
1 1349008C2 8 BRAKE DISC, middle, Included with the transmission assembly.
2 1349009C2 4 BRAKE DISC, intermediate, Included with the transmission assembly.
4 1276923C2 2 LINK, actuating, Included with the transmission assembly.
5 A41865 2 STUD, link, Included with the transmission assembly.
6 211-1028 6 BALL, 7/8″ Dia, chrome alloy steel, 7/8 in., grade 24, replaces 17028R1, Included with the transmission
7 359859R2 3 SPRING, extension, Included with the transmission assembly.
8 425-158 2 NUT, Jam, 1/2″-20, G5, , Included with the transmission assembly.
9 1342950C1 2 HOUSING ASSY., brake, Includes: Ref. 10, Included with the transmission assembly.
10 37-1516 2 DOWEL, 5/16″ x 1″, PIN, 5/16 x 1 in., hardened, replaces 20020R1, Included with the transmission
11 380-21028 8 SCREW, 12 Pt Flg, 5/8″-11 x 1 3/4″, BOLT, 12 point flange, 5/8 NC x 1-3/4 in., Included with the
13 184072C1 2 SEAL, oil, Included with the transmission assembly.
14 238-5427 2 O-RING, -427, 70 Duro, 4.725″ ID x .275″ Thk, , Included with the transmission assembly.
15 1981196C2 2 COVER, ASSY., brake housing, Includes: Ref. 16, Included with the transmission assembly.
16 37-11496 1 DOWEL, 7/8″ x 6″, dowel, hardened, 7/8 x 6 in., replaces 28333R1, Included with the transmission
17 413-832 8 BOLT, Hex, 1/2″-13 x 2″, G5, hex, 1/2 NC x 2 in., Included with the transmission assembly.
18 80679 8 WASHER, LOCK, 1/2″, , Included with the transmission assembly.
20 1321923C1 2 CLEVIS, YOKE, brake pull, Included with the transmission assembly.
21 27-10137 2 PIN, CLEVIS, 5/8″ x 1 3/8″, clevis, 5/8 x 1-3/8 in., Included with the transmission assembly.
22 432-816 2 PIN, SPLIT (COTTER), 1/8″ x 1″, , Included with the transmission assembly.
23 184321C1 2 COVER, BOOT brake housing
24 1321973C1 2 ROD, brake pull
25 312824R1 2 SPRING, brake lever return
26 184282C2 2 BAR, brake adjustment
28 231-5144 2 NUT, Flg, USR, 1/4″-20
29 1277201C3 2 LEVER, brake
30 1308992C1 2 PIN, brake lever
31 432-812 4 PIN, SPLIT (COTTER), 1/8″ x 3/4″
32 412-412 2 BOLT, CARRIAGE, Short NK, 1/4″-20 x 3/4″, G2, BOLT carriage, 1/4 NC x 3/4 in., grade 2
33 136969C1 2 FASTENER, NUT push on type, 1/4 in., brake lever
34 662620R1 1 COVER, BOOT , Part included in wheel cylinder repair kit 1288942C92
35 662616R1 1 PISTON, wheel cylinder , Part included in wheel cylinder repair kit 1288942C92
36 1281779C1 1 PIN, LARGE, brake piston spacer
38 84940C1 1 SPRING, wheel cylinder , Part included in wheel cylinder repair kit 1288942C92
39 51906H 2 CUP, wheel cylinder , Part included in wheel cylinder repair kit 1288942C92
37 184325C2 1 PIN, LARGE, PLUNGER, wheel cylinder
44 85105C1 2 EXPANDER, CUP, wheel cylinder , Part included in wheel cylinder repair kit 1288942C92
48 218-441 1 CONNECTOR, HYD., 7/16″-20, 37є x 1/8″-27, NPTF, straight, 7/16 – 20 flare x 1/8 in., PT
49 217-430 1 PLUG, Hex Soc, 1/8″-27
50 660901R1 2 VALVE, bleeder
53 574273R91 2 BEARING, ball, housing cover, Included with the transmission assembly.
54 184131C1 2 RING, SNAP, #393, 4.234″, Int, bearing retaining, Included with the transmission assembly.
55 413-612 4 BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd, hex, 3/8 NC x 3/4 in.
56 495-81129 4 WASHER, 13/32″ x 3/4″ x .120″, flat, 13/32 x 3/4 x 7/64 in.
57 1327797C1 2 CLAMP, U BOLT, 1/4 NC x 1-1/4 in.
58 95-51028 4 WASHER, 1/4″, flat, 9/32 x 1/2 x 1/16 in.
59 231-4144 4 NUT, LOCK, 1/4″-20, GB
1 1281890C2 1 RESERVOIR, brake fluid
2 214-1704 6 CLAMP, HOSE, #4, 0.25/0.62 Type M Worm, Adjustable
3 1281889C1 1 HOSE, return, 24 in., 610 mm, long
4 198824C1 1 GROMMET, rubber brake hose
5 1285312C1 1 TEE, FITTING, stem, Y type
6 1281888C1 2 HOSE, return, 6 in., 152 mm, long
7 1281891C1 1 CLAMP, reservoir mounting, brake fluid
8 260-1458 2 SCREW, SELF TAPPING, Cross Pan Hd, #10 x 1/2″, self tapping, pan Phillips, No.10 – 16 x 1/2 in.
11 409-7516 4 BOLT, Hex Flg, 5/16″-18 x 1″, Serr
12 231-5145 4 NUT, Flg, USR, 5/16″-18
13 1327561C2 1 SUPPORT, master brake cylinder
14 477-73812 3 SCREW, Sltd Serr Truss Hd, 3/8″ x 3/4″, slotted truss head, special, 3/8 NC x 3/4 in.
14 477-73820 1 SCREW, Sltd Serr Truss Hd, 3/8″-16 x 1 1/4″, slotted truss head, special, 3/8 NC x 1-1/4 in.
15 495-11041 1 WASHER, 3/8″, SAE, Flat, (13/32 x 13/16 x 1/16″)
16 231-5146 5 NUT, Flg, USR, 3/8″-16
17 1281885C1 1 PIPE, TUBE equalizer
18 1546436C1 2 FITTING, ADAPTER straight, 7/16 – 20 in. flare x O-ring boss, purchase O-ring separately
19 237-3004 2 O-RING, 4-1, Cl 3, .351″ ID x .072″ Thk
20 218-5228 2 ELBOW, 90є, 7/16″-20, 37є x 7/16″-20, 37є Fem Sw, ELBOW, 90 deg., 7/16 – 20 in. flare x swivel
23 1321476C2 1 PIPE, TUBE, brake, upper right hand
24 1321475C2 1 PIPE, TUBE, brake, upper left hand
25 1321514C1 1 PIPE, TUBE, brake, lower right hand
26 1321513C1 1 PIPE, TUBE, brake, lower left hand
27 1321511C2 2 PIPE, TUBE, brake, center
28 218-441 2 CONNECTOR, HYD., 7/16″-20, 37є x 1/8″-27, NPTF, straight, 7/16 – 20 flare x 1/8 in. PT
1 1281884C91 2 CYLINDER, ASSY., 1 (25) ID x 1-1/2 inch (37 mm) stroke, master brake, Includes: Ref. 2 thru 21
16 85109C1 1 BELLOWS, BOOT master brake cylinder , Part of master brake cylinder repair kit 1288941C91
1 1277202C1 1 PLATE, SECTOR parking brake
2 166149C91 1 CABLE, ASSY., parking brake, 125 in., Includes: Ref. 3
3 170273C1 1 HANDLE, control, parking brake cable
4 213-113 1 CLEVIS, ADJUSTABLE, #10-32, adjustable, No. 10 NF parking brake cable, replaces 117824
5 177802C1 1 BAR, parking brake ratchet
6 702093C1 5 STRAP, CABLE, tie, 3 in. maximum, parking vrake cable
8 631252R1 1 PIN, HEADED, 3/8″ x 4 1/8″, headed, 3/8 x 4-1/8 in.
9 432-812 1 PIN, SPLIT (COTTER), 1/8″ x 3/4″
10 427-3103 1 PIN, CLEVIS, 3/16″ x 1 1/32″, hardened, 3/16 x 1-1/32 in.
11 432-48 1 PIN, SPLIT (COTTER), 1/16″ x 1/2″
12 477-73112 2 BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
13 231-5145 2 NUT, Flg, USR, 5/16″-18
2 1272941C1 1 CAP, breather, non vented, replaces 1346309C1, Includes: Ref. 3
3 104407A1 1 SCREEN, filter, fill cap, not shown
4 923745C91 1 BREATHER ASSY., reservoir
5 244600R92 2 SIGHTGLASS, GAUGE oil level
6 238-5114 2 O-RING, -114, 70 Duro, .612″ ID x .103″ Thk
7 1979829C1 2 SUPPORT, hydraulic reservoir
8 1347146C1 1 CLAMP, reservoir
9 409-7512 4 BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
10 231-5145 4 NUT, Flg, USR, 5/16″-18
11 217-411 2 PLUG, Hex Hd, 1/2″-14
12 218-5161 1 PLUG, Hex Hd, 1 5/8″-12 ORB, hex, 1-5/8-12 inch O-ring boss, Includes: Ref. 13
13 237-6020 1 O-RING, 20-1, 90 Duro, 1.475″ ID x .118″ Thk
2 1272941C2 1 BREATHER, reservoir, non vented, Includes: Ref. 3
3 104407A1 1 SCREEN, filter, fill cap, not shown
4 923745C91 1 BREATHER ASSY., reservoir
5 132865A1 2 SIGHTGLASS, GAUGE, oil level
6 238-5114 2 O-RING, -114, 70 Duro, .612″ ID x .103″ Thk
7 1979829C1 2 SUPPORT, hydraulic reservoir
8 1347146C1 1 CLAMP, reservoir
9 409-7512 4 BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
10 231-5145 4 NUT, Flg, USR, 5/16″-18
1 1343660C1 1 RESERVOIR, ASSY., hydraulic oil, 10 gallon, see Fig. 8-02
2 217-44 1 REDUCER, 1/2″-14 NPTF x 3/8″-18 Fem NPTF, REDUCER, 1/2 PT x 3/8 in. female PT
3 301803R1 1 VALVE, SHUT-OFF, reservoir drain
4 1954736C1 2 CLAMP, HOSE, adjustable
5 1347032C2 1 HOSE, reservoir oil drain, 53 – 1/8 in. (1350 mm) long, cut from 1977295CX bulk hose, see below
6 1977169C1 1 TEE, oil drain, no longer available, order 2 of Ref.12 1977169C1 tee, 1 of Ref. 13 1347070C2 hose, 2
7 217-411 2 PLUG, Hex Hd, 1/2″-14
8 702093C1 2 STRAP, CABLE, tie, 3 in. maximum, nylon, retaining
9 119254A1 1 CROSS, oil drain
10 1977294C3 1 HOSE, oil drain, 22 – 7/8 in. (580 mm) long, cut from 1977295CX bulk hose PTO, see below
11 1954736C1 2 CLAMP, HOSE, adjustable, replaced 112700R1 hose
12 1977169C1 2 TEE, oil drain
13 1347070C2 1 HOSE, LARGE, 3 in. (75 mm) long, cut from 1977295CX bulk hose, see below
1 1343660C1 1 RESERVOIR, ASSY., hydraulic oil, 10 gallon, see Fig.8-02
2 217-317 1 FITTING, 45є, 1 1/4″ Hose x 1 5/8″-12 ORB Beaded, 45 deg., 1-1/4 stem end x 1-5/8 – 12 in. adj.
3 237-6020 1 O-RING, 20-1, 90 Duro, 1.475″ ID x .118″ Thk
4 214-3232 4 CLAMP, HOSE, 1.25/2.125 HD Worm, W/liner, Adjustable
5 1541688C1 2 HOSE, FLEXIBLE, 26 in. (660 mm) long, cut from 1541953C1 bulk hose charge pump suction, see
6 217-184 1 FITTING, 1 1/4″ Hose X 1 5/16″-12 ORB, Beaded, Includes Ref. 7
7 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
8 217-355 2 FITTING, 90є, 1 1/4″ Hose x 1 5/8″-12 ORB Beaded, Adjustable, Includes Ref. 9
9 237-6020 1 O-RING, 20-1, 90 Duro, 1.475″ ID x .118″ Thk
10 87784C91 1 FILTER ASSY., hydrostatic charge pump, suction, see Figs. 8-10
2 A177605 1 FILTER, HYDRAULIC OIL, element , Part of filter element kit 1329214C1
3 93196C1 1 O-RING, GASKET filter element , Part of filter element kit 1329214C1
4 1989296C3 1 SUPPORT, BRACKET mounting, return filter
5 409-7612 3 BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr, Return filter mounting
7 409-7616 2 BOLT, Hex Flg, 3/8″-16 x 1″, Serr, Return filter mounting
8 231-5146 2 NUT, Flg, USR, 3/8″-16
9 1541545C2 1 STEM, ROD, return filter mounting
10 413-616 1 BOLT, Hex, 3/8″-16 x 1″, G5, Full Thd, hex, 3/8 NC x 1 in., return filter mounting
11 425-106 1 NUT, 3/8″-16, G5, Return filter mounting
12 231-5146 2 NUT, Flg, USR, 3/8″-16, Return filter mounting
13 495-71041 1 WASHER, 3/8″, flat, 13/32 x 1-1/4 x 3/32 in., return filter mounting
2 A177605 1 FILTER, HYDRAULIC OIL, ELEMENT, charge pump filter, Part of filter element kit 1329214C1
3 93196C1 1 O-RING, GASKET filter element, charge pump filter, Part of filter element kit 1329214C1
4 1347113C2 1 SUPPORT, BRACKET mounting, charge filter mounting
5 409-7616 4 BOLT, Hex Flg, 3/8″-16 x 1″, Serr, Charge filter mounting
6 231-5146 4 NUT, Flg, USR, 3/8″-16, Charge filter mounting
7 413-610 3 BOLT, Hex, 3/8″-16 x 5/8″, G5, Full Thd, BOLT hex, 3/8 NC x 5/8 in., charge filter mounting
8 492-11038 2 WASHER, LOCK, 3/8″, Charge filter mounting
9 1347116C2 1 SUPPORT, BRACKET, charge filter, charge filter mounting
1 111078A3 1 COOLER, ASSY., hydraulic oil, see Fig. 8-20
2 214-1516 8 CLAMP, HOSE, #16, .81/1.50 Type F Worm, W/liner, Adjustable
3 1343660C1 1 RESERVOIR, ASSY., hydraulic oil, 10 gallon, See Fig. 8-02
4 217-352 1 FITTING, 90є, 1″ Hose x 1 5/16″-12 ORB Beaded, 90 deg., 1 stem end x 1-5/16-12 in. adj. O-ring boss
5 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
6 1979763C2 1 HOSE, cooler to reservoir, 15-1/2 in. (394 mm) long, cut from 364361C1 bulk hose, see below
7 1979731C1 1 TUBE, cooler return
8 218-478 1 ELBOW, 90є, 1 5/16″-12, 37є x 1 5/16″-12, 37є, ELBOW, 90 deg., 1-5/16-12 in. flare x flare
9 1324941C1 1 PIPE ASSY., TUBE, oil cooler return
10 121298A1 2 HOSE, FLEXIBLE, 35 in. (890 mm) long, cut from 364361C1 bulk hose at cooler, replaces (1040 mm)
11 1343716C2 1 HYDROSTATIC PUMP, ASSY., see Figs. 6-16 to 6-25A
12 178995C1 1 ELBOW, 90 deg., special 1 in. barb end x 1-1/16 in. PT, Includes: Ref. 13
13 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
14 1979762C2 1 HOSE, cooler to pump, 27-1/4 in. (610 mm) long, cut from 364361C1 bulk hose, see below
15 1979658C1 1 TUBE, oil cooler supply
16 1347071C1 2 CLAMP, CLAMP, 1 in. O.D.
17 413-536 2 BOLT, Hex, 5/16″-18 x 2 1/4″, G5, hex, 5/16 NC x 2-1/4 in., if used
18 495-21038 2 WASHER, 5/16″, flat, 3/8 x 7/8 x 3/32 in.
19 231-5145 2 NUT, Flg, USR, 5/16″-18
1 1343660C1 1 RESERVOIR, ASSY., hydraulic oil, 10 gallon, see Fig. 8-02
2 1979760C1 1 TEE, return, at reservoir
3 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
4 214-1404 2 CLAMP, HOSE, #4, 0.25/0.62 Type M Worm, Adj
5 1343558C1 1 VALVE, bypass power guide axle
6 1979655C1 1 TEE, return, hose to bypass valve
7 214-1516 8 CLAMP, HOSE, #16, .81/1.50 Type F Worm, W/liner, Adjustable
8 1979764C2 1 HOSE, cooler return to tee, 10-1/2 in. (367 mm) long, cut from 364361C1 bulk hose, see below
9 1979731C1 1 TUBE, cooler return
10 218-478 1 ELBOW, 90є, 1 5/16″-12, 37є x 1 5/16″-12, 37є, ELBOW, 90 deg., 1-5/16-12 in. flare x flare
11 1324941C1 1 PIPE ASSY., TUBE, oil cooler return
12 121298A1 2 HOSE, FLEXIBLE, at cooler, 35 in. (890 mm) long, cut from 364361C1 bulk hose, replaces (1040 mm)
13 1343716C2 1 HYDROSTATIC PUMP, ASSY., see Figs. 6-16 to 6-25A
14 178995C1 1 ELBOW, 90 deg., special 1 in. barb end x 1-1/16 in. PT, Includes: Ref. 15
15 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
16 1979762C2 1 HOSE, cooler to pump, 24-1/2 in. (610 mm) long, cut from 364361C1 bulk hose, see below
17 1979658C1 1 TUBE, oil cooler supply
18 111078A3 1 COOLER, ASSY., see Figure 8-20
19 1347071C1 2 CLAMP, CLAMP, 1 in. O.D. tube, retaining
20 413-536 2 BOLT, Hex, 5/16″-18 x 2 1/4″, G5, hex, 5/16 NC x 2-1/4 in., if used
21 495-21038 2 WASHER, 5/16″, flat, 3/8 x 7/8 x 3/32 in.
22 231-5145 2 NUT, Flg, USR, 5/16″-18
1 111078A3 1 COOLER, ASSY., hydraulic oil standard, see Fig. 8-20
2 84659C3 1 COOLER, OIL, ASSY., oil auxiliary, hydraulic, see Fig. 8-22
3 214-1516 16 CLAMP, HOSE, #16, .81/1.50 Type F Worm, W/liner, Adjustable
4 1979766C1 1 HOSE, tee to auxiliary cooler, 16 in. (406 mm) long, cut from 364360C1 bulk hose, see below
5 D55776 1 TEE, hose stem, cooler supply
6 87707C2 1 HOSE, supply pump to auxiliary cooler, 18-7/8 in. (480 mm) long, cut from 364361C1 bulk hose, see
7 1979658C1 1 TUBE, oil cooler suppl to pump
8 1979762C2 1 HOSE, supply pump to auxiliary cooler, 24-1/4 in. (610 mm) long, cut from 364361C1 bulk hose, see
9 178995C1 1 ELBOW, 90 deg., special 1 in. barb end x 1-16 in. PT, Includes: Ref. 10
10 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
11 87707C2 1 HOSE, supply tee to standard cooler, 18-7/8 in. (480 mm) long, cut from 364361C1 bulk hose, see
12 87707C2 1 HOSE, return auxiliary cooler to tee, 18-7/8 in. (480 mm) long, cut from 364361C1 bulk hose, see below
13 1979762C2 1 HOSE, returm standard cooler to tee, 24-1/4 in. (610 mm) long, cut from 364361C1 bulk hose, see
14 1979672C1 1 TEE, cooler return, 1 in. stem end
15 87707C2 1 HOSE, return to reservoir, 18-7/8 in. (480 mm) long, cut from 364361C1 bulk hose, see below
16 1324941C1 1 PIPE ASSY., TUBE, oil cooler return to reservoir
17 218-478 1 ELBOW, 90є, 1 5/16″-12, 37є x 1 5/16″-12, 37є, ELBOW, 90 deg., 1-5/16-12 in. flare x flare
18 1979731C1 1 TUBE, cooler return to reservoir
19 1979762C2 1 HOSE, cooler to reservoir, 15-1/2 in. (394 mm) long, cut from 364361C1 bulk hose, see below
20 217-352 1 FITTING, 90є, 1″ Hose x 1 5/16″-12 ORB Beaded, 90 deg., 1 stem end x 1-5/16-12in. adj. O-ring boss
21 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
22 1347071C1 2 CLAMP, CLAMP, 1 in. O.D. tube, retaining.
23 413-536 2 BOLT, Hex, 5/16″-18 x 2 1/4″, G5, hex, 5/16 NC x 2-1/4 in.
24 495-21038 2 WASHER, 5/16″, flat, 3/8 x 7/8 x 3/32 in.
25 231-5145 2 NUT, Flg, USR, 5/16″-18
26 1343660C1 1 RESERVOIR, ASSY., hydraulic oil, 10 gallon, see Fig. 8-02
27 108113A1 1 HYDROSTATIC PUMP, ASSY., see Figs. 6-16, 6-22 and 6-25A
1 111078A3 1 COOLER, ASSY., hydraulic oil standard, see Fig. 8-20
2 84659C3 1 COOLER, OIL, ASSY., hyfdraulic oil, see Fig. 8-22
3 214-1516 16 CLAMP, HOSE, #16, .81/1.50 Type F Worm, W/liner, Adjustable
4 1979766C1 1 HOSE tee to auxiliary cooler, 16 in. (406 mm) long, cut from 364360C1 bulk hose, see below
5 D55776 1 TEE, cooler supply
6 87707C2 1 HOSE, supply pump to auxiliary cooler, 18-7/8 in. (480 mm) long, cut from 364361C1 bulk hose, see
7 1979658C1 1 TUBE, oil cooler supply to pump
8 1979762C2 1 HOSE, supply pump to auxiliary cooler, 24-1/4 in. (610 mm) long, cut from 364361C1 bulk hose, see
9 178995C1 1 ELBOW, 90 deg., special 1 in. barb end x 1-1/16 in. PT, Includes: Ref. 10
10 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
11 87707C2 1 HOSE, supply tee to standard cooler, 18-7/8 in. (480 mm) long, cut from 364361C1 bulk hose, see
12 87707C2 1 HOSE, return auxiliary cooler to tee, 18-7/8 in. (480 mm) long, cut from 364361C1 bulk hose, see below
13 1979762C2 1 HOSE, return standard cooler to tee, 24-1/4 in. (610 mm) long, cut from 364361C1 bulk hose, see below
14 1979672C1 1 TEE, 1 in. stem end, cooler return
15 87707C2 1 HOSE, return to reservoir, 18-7/8 in. (480 mm) long, cut from 364361C1 bulk hose, see below
16 1324941C1 1 PIPE ASSY., TUBE, oil cooler return to reservoir
17 218-478 1 ELBOW, 90є, 1 5/16″-12, 37є x 1 5/16″-12, 37є, ELBOW, 90 deg., 1-5/16-12 in. flare x flare
18 1979731C1 1 TUBE, cooler return
19 1979764C2 1 HOSE, cooler return to tee, 10-1/2 in. (267 mm) long, cut from 364361C1 bulk hose, see below
20 1979655C1 1 TEE, return, hose to bypass valve
21 1343558C1 1 VALVE, bypass power guide axle
22 214-1404 2 CLAMP, HOSE, #4, 0.25/0.62 Type M Worm, Adj
23 1979760C1 1 TEE, return, at reservoir, Includes: Ref. 24
24 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
25 1347071C1 2 CLAMP, CLAMP, 1 in. O.D. tube, retaining
26 413-536 2 BOLT, Hex, 5/16″-18 x 2 1/4″, G5, hex, 5/16 NC x 2-1/4 in.
27 495-21038 2 WASHER, 5/16″, flat, 3/8 x 7/8 x 3/32 in.
28 231-5145 2 NUT, Flg, USR, 5/16″-18
29 1343660C1 1 RESERVOIR, ASSY., hydraulic oil, 10 gallon, see Fig. 8-02
30 108113A1 1 HYDROSTATIC PUMP, ASSY., see Figures 6-16, 6-22 and 6-25A
1 111078A3 1 COOLER, ASSY., hydraulic oil, Includes: Ref. 2 thru 6
2 93198C1 1 VALVE, bypass
3 238-5020 1 O-RING, -020, 70 Duro, .864″ ID x .070″ Thk
4 A189029 1 SPRING, bypass valve
5 273916 1 PLUG, Hex Hd, 1 5/16″-12 ORB, Includes Ref. 6
6 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
7 1541786C4 2 SUPPORT, oil cooler, left hand
8 1541787C2 1 ANGLE, SUPPORT, oil cooler, upper right hand
9 1324914C3 1 ANGLE, SUPPORT, oil cooler, lower right hand
10 409-7512 4 BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
11 231-5145 3 NUT, Flg, USR, 5/16″-18
12 199953C1 4 SCREW, SELF TAPPING, Hex Wash Hd, 5/16″-18 x 13/16″
13 495-21038 3 WASHER, 5/16″, flat, 3/8 x 7/8 x 3/32 in.
1 84659C3 1 COOLER, OIL, ASSY., oil hydraulic, auxiliary, Includes: Ref. 2 thru 6
2 93198C1 1 VALVE, bypass
3 238-5020 1 O-RING, -020, 70 Duro, .864″ ID x .070″ Thk
4 A189029 1 SPRING, bypass valve
5 273916 1 PLUG, Hex Hd, 1 5/16″-12 ORB, Includes Ref. 6
6 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
8 199953C1 4 SCREW, SELF TAPPING, Hex Wash Hd, 5/16″-18 x 13/16″
9 1979632C2 1 SUPPORT, oil cooler, upper left hand
10 1979674C1 1 SUPPORT, oil cooler, upper right hand
11 1979787C2 1 SUPPORT, oil cooler, lower right hand
12 1979633C2 1 SUPPORT, oil cooler strap, left hand
13 1979727C1 1 SUPPORT, oil cooler, lower left hand
15 409-7512 6 BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
16 231-5145 8 NUT, Flg, USR, 5/16″-18
17 477-73112 2 BOLT, Slotted Tr Hd, 5/16″-18 x 3/4″
20 1970461C1 2 GROMMET, rubber, 1-3/8 x 2 x 5/16, 1-12 x 1-1/8 x 7/16 in.
21 28627R1 2 GROMMET, 1 1/8″ ID x 1 3/4″ x .062″, Diag cut, 1-1/8 x 1-3/4 x 7/16 in.
1 1343660C1 1 RESERVOIR, ASSY., hydraulic oil, 10 gallon, see Fig. 8-02
2 217-178 1 FITTING, 1 1/4″ Hose X 1 5/8″-12 ORB, Beaded, ADAPTER straight, 1-1/4 stem end x 1-5/8-12 in.
3 237-6020 1 O-RING, 20-1, 90 Duro, 1.475″ ID x .118″ Thk
4 1989365C2 1 HOSE, header lift suction, 16-1/4 in. (412 mm) long, cut from 15419853C1 bulk hose, see below
5 1994653C2 1 PUMP, ASSY., auxiliary drive header lift, see fig. 8-56
6 217-178 1 FITTING, 1 1/4″ Hose X 1 5/8″-12 ORB, Beaded, ADAPTER straight, 1-1/4 stem end x 1-5/8-12 in.
7 237-6020 1 O-RING, 20-1, 90 Duro, 1.475″ ID x .118″ Thk
8 201-104 1 CONNECTOR, HYD., 1 3/16″-12 ORFS x 1 1/16″-12 ORB, Includes Ref. 9 and 10
9 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
10 238-6018 1 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
11 238-6018 1 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
12 1989281C2 1 TUBE, pressure header lift
13 1980050C2 1 HOSE, auxiliary pump pressure, 29 in. (737 mm) long
14 201-419 1 TEE, 1 3/16″-12 ORFS x 1 3/16″-18 Sw Br, 1-13/16-12 in. swivel face branch x face seal x face seal
15 238-6018 2 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
16 1989509C2 1 HOSE, lift pressure, 24 in. (610 mm) long
18 1989475C3 1 TEE, adj., special 5/8 O-ring boss x 3/4 x 3/8 in.
19 237-6010 1 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
20 214-3232 2 CLAMP, HOSE, 1.25/2.125 HD Worm, W/liner, Adjustable
21 1542679C2 1 VALVE, ASSY., header lift, see Fig. 8-46
22 201-104 1 CONNECTOR, HYD., 1 3/16″-12 ORFS x 1 1/16″-12 ORB, Includes Ref. 23 and 24
23 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
24 238-6017 1 O-RING, -017, 90 Duro, .676″ ID x .070″ Thk, 3/4 ID x 1/16 in. wide
28 1989362C1 3 CLAMP, two piece, 3/4 in. and 1/2 in. O.D. tubes
29 413-536 3 BOLT, Hex, 5/16″-18 x 2 1/4″, G5, hex, 5/16 NC x 2-1/4 in.
35 1347127C1 6 PLATE, clamp hydraulic tube
37 231-4115 3 NUT, LOCK, 5/16″-18, GB
40 1272346C1 1 FILTER, inline valve pressure line, Includes: Ref. 41
41 237-6012 1 O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk
44 196868C2 1 SUPPORT, PLATE
45 409-7512 1 BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr
46 231-5145 1 NUT, Flg, USR, 5/16″-18
1 1343660C1 1 RESERVOIR, ASSY., hydraulic oil, 10 gallons, see Fig. 8-02
2 1541642C1 1 TEE, special, beaded tube, Includes: Ref. 3
3 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
5 1541694C1 1 HOSE, reservoir to filter, 28-3/16 in. (715 mm) long, cut from 1541952C1 bulk hose, see below
6 217-354 1 FITTING, 90є, 1″ Hose x 1 5/8″-12 ORB Beaded, ELBOW, 90 deg., 1 stem end x 1-5/8-12 in. adj.
7 237-6020 1 O-RING, 20-1, 90 Duro, 1.475″ ID x .118″ Thk
8 87784C91 1 FILTER ASSY., charge pump, suction, see Fig. 8-10
9 201-122 1 CONNECTOR, HYD., 1 7/16″-12 ORFS x 1 5/8″-12 ORB, ADAPTER straight, 1-7/16-12 face seal x
10 238-6021 1 O-RING, -021, 90 Duro, .926″ ID x .070″ Thk
11 237-6020 2 O-RING, 20-1, 90 Duro, 1.475″ ID x .118″ Thk
12 1989283C1 1 TUBE, valve return
13 214-3228 2 CLAMP, HOSE, 1.00/1.875 HD Worm, W/liner, Adjustable
14 1989530C1 1 HOSE, 33-7/8 in. (860 mm) long
15 1542679C2 1 VALVE, ASSY., header lift, see Fig. 8-46
16 238-6018 2 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
17 1980050C2 1 HOSE, relief valve drain, 29 in. (737 mm) long
18 413-444 2 BOLT, Hex, 1/4″-20 x 2 3/4″, G5, hex, 1/4 NC x 2-3/4 in.
19 231-5144 2 NUT, Flg, USR, 1/4″-20
20 1542686C1 1 VALVE, relief, 2500 psi
21 201-141 1 CONNECTOR, HYD., 1 3/16″-12 ORFS x 3/4″-16 ORB, ADAPTER straight, 1-3/16-12 face seal x
22 238-6018 3 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
23 237-6008 2 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
24 201-358 1 ELBOW, 90є, 1 3/16″-12 x 3/4″-16, Adj, ORFS, 90 deg., 1-3/16-12 face seal x 3/4-16 in. adj. O-ring
25 238-6018 1 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
26 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
32 201-350 1 ELBOW, 90є, 1 3/16″-12 x 7/8″-14, Adj, ORFS, 90 deg., 1-3/16-12 face seal x 7/8-14 in. adj. O-ring
33 237-6010 1 O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk
34 238-6018 1 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
40 214-3228 2 CLAMP, HOSE, 1.00/1.875 HD Worm, W/liner, Adjustable
41 1541692C1 1 HOSE, FLEXIBLE, reel drive suction, 25-3/16 in. (640 mm) long, cut from 1541952C1 bulk hose, see
42 217-316 1 FITTING, 45є, 1″ Hose x 1 5/16″-12 ORB Beaded, ELBOW, 45 deg., 1 stem end x 1-5/16-12 in. adj.
43 237-6016 1 O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk
44 201-419 1 TEE, 1 3/16″-12 ORFS x 1 3/16″-18 Sw Br, 1-3/16-12 in.swivel face branch x face seal x face seal
45 238-6018 2 O-RING, -018, 90 Duro, .739″ ID x .070″ Thk
1 426-840 3 BOLT, Hex, 1/2″-13 x 2 1/2″, G8, BOLT hex, 1/2 NC x 2-1/2 in., grade 8
2 495-11053 3 WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″)
3 425-118 1 NUT, 1/2″-20, G5, hex, 1/2 in. NF
4 492-11038 4 WASHER, LOCK, 3/8″
5 396-41053 1 WASHER, 17/32″ x 1 1/4″ x .188″, HDN, flat, hardened, 17/32 x 1-1/4 x 3/16
6 231-5148 1 NUT, Flg, USR, 1/2″-13
7 413-8124 1 BOLT, Hex, 1/2″-13 x 7 3/4″, G5, BOLT hex, 1/2 in. NC x 1-1/2 in.
8 495-11053 1 WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″)
10 1541612C1 1 HUB, hydraulic pump
11 413-620 4 BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd, hex, 3/8 NC x x1-1/4 in.
12 1541761C1 1 PULLEY ASSY., auxiliary pump drive, Includes: Ref. 13, 14, and 15
13 A144861 1 BEARING, PULLEY, outer
14 466176R92 1 SEAL, PULLEY
15 658089R91 1 BEARING, BALL, PULLEY, outer
16 181338C2 1 SUPPORT ASSY., BRACKET, auxiliary drive, rear
17 232-41112 1 NUT, LOCK, 3/4″-10, GC
18 495-81044 1 WASHER, 25/32″ x 1 3/4″ x .120″, flat, 25/32 x 1-3/4 x 7/64 in.
19 434-820 1 BOLT, CARRIAGE, Short NK, 1/2″-13 x 1 1/4″, G5, Full Thd, BOLT carriage, 1/2 NC x 1-1/4 in.
20 413-820 4 BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd, hex, 1/2 NC x 1-1/4 in.
21 495-11053 5 WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″)
22 80679 5 WASHER, LOCK, 1/2″
23 425-108 7 NUT, 1/2″-13, G5
24 1541699C1 1 BELT, drive pump
25 1330517C1 1 LEVER, auxiliary pump drive, Includes: Ref. 26
26 188068C1 2 BUSHING, lever
27 217-90 1 FITTING, VALVE, 1/8 in. PT
28 274844R91 1 BEARING, idler pulley
29 192865C1 1 PULLEY, idler, 8 in. O.D.
30 194729C2 1 SUPPORT, pump drive pivot
32 194652C1 1 PIVOT, rod drive
33 191823C1 1 ROD, auxiliary drive jackshaft
34 432-1216 1 PIN, SPLIT (COTTER), 3/16″ x 1″, 3/16″ x 1″
35 495-81287 1 WASHER, 17/32″ x 1 1/4″ x .120″, flat, 17/32 x 1-1/4 x 7/64 in.
37 1541718C1 1 SPACER, 7-9/16 (192 mm) long
37 1989254C1 1 SPACER, 6-1/2 (165 mm) long
38 1330488C1 1 PULLEY, drive, auxiliary pump, 8.65 in. O.D.
39 196482C2 1 HUB, drive pulley
41 495-81073 4 WASHER, 1 1/32″ x 1 3/4″ x .060″, flat, 1-1/32 x 1-3/4 x 1/16 in.
42 432-1624 1 PIN, SPLIT (COTTER), 1/4″ x 1 1/2″
43 413-828 2 BOLT, Hex, 1/2″-13 x 1 3/4″, G5
1 1542679C2 1 VALVE, ASSY., header lift parts
2 201-412 1 TEE, 13/16″-16 x 3/4″-16 Run, ORFS, 13/16-16 face branch x face x 3/4-16 in. adj. O-ring, Includes:
3 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
4 238-6014 2 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
5 1989666C1 1 HOSE, header cylinder supply, 96-7/8 in. (2460 mm) long
6 201-903 1 NUT, LOCK, Blkhd, 13/16″-16, hex, lock, bulkhead 13/16 in. NF
7 201-423 1 TEE, 9/16″-18, Blkhd, Run, ORFS, 13/16-16 in. face seal branch x face seal x bulkhead face seal
8 238-6014 3 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
9 201-320 1 ELBOW, 90є, 13/16″-16 x 13/16″-16 Fem Sw ORFS, ELBOW, 90 deg., 13/16-16 in. face seal x swivel
10 238-6014 1 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
11 1989667C1 3 HOSE, header lift system, 36 in. (915 mm) long
12 201-348 3 ELBOW, 45є, 13/16″-16 x 3/4″-16. Adj, ORFS, Includes Ref. 13 and 14, Two 45 deg. elbows used at
13 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
14 238-6014 1 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
15 201-305 1 ELBOW, 90є, 13/16″-18 x 3/4″-18 Adj, ORFS, 90 deg., 13/16-16 face seal x 3/4-16 in. adj. O-ring boss
16 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
17 238-6014 1 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
18 201-416 1 TEE, 13/16″-16 ORFS x 13/16″-16 Sw Run, 13/16-16 in. face branch x face x swivel face, Includes:
19 238-6014 2 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
20 127779C94 2 CYLINDER, ASSY., 2-5/8 (67) ID x 20-1/2 inch (521 mm) stroke, header lift, parts list Fig. 8-34
21 1989343C1 1 ANGLE BAR, tube support
22 409-7612 2 BOLT, Hex Flg, 3/8″-16 x 3/4″, Serr
23 231-5146 2 NUT, Flg, USR, 3/8″-16
24 1989653C1 1 SUPPORT, header cylinder fitting
25 515-23206 1 CLAMP, 13/16″, Insul, 3/8″ Bolt, hose, closed coated, header lift
26 413-432 1 BOLT, Hex, 1/4″-20 x 2″, G5
27 495-11028 1 WASHER, 1/4″, SAE, flat, 9/32 x 5/8 x 1/16 in.
28 231-5144 1 NUT, Flg, USR, 1/4″-20
29 299269C91 1 CLAMP, retaining, single, header lift and steering hose
30 425-1410 1 NUT, Jam, 5/8″-11, G5, hex, jam, 5/8 in. NC
31 470375C1 2 CLAMP, double header lift and steering hoses
1 1542679C2 1 VALVE, ASSY., header lift, see Fig. 8-46
2 201-412 1 TEE, 13/16″-16 x 3/4″-16 Run, ORFS, 13/16-16 face branch x face x 3/4-16 in. adj. O-ring boss
3 237-6008 1 O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk
4 238-6014 2 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
5 1989666C1 1 HOSE, header cylinder supply, 96-7/8 in. (2460 mm) long
6 201-903 1 NUT, LOCK, Blkhd, 13/16″-16, hex, lock, bulkhead, 3/16 in. NF
7 201-423 1 TEE, 9/16″-18, Blkhd, Run, ORFS, 13/16-16 in. face seal branch x face seal x bulkhead face seal
8 238-6014 3 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
9 201-320 1 ELBOW, 90є, 13/16″-16 x 13/16″-16 Fem Sw ORFS, ELBOW, 90 deg., 13/16-16 in. face seal x swivel
10 238-6014 1 O-RING, -014, 90 Duro, .489″ ID x .070″ Thk
11 1989667C1 2 HOSE, header lift cylinder, 36 in. (915 mm) long
12 201-348 2 ELBOW, 45є, 13/16″-16 x 3/4″-16. Adj, ORFS, Includes Ref. 13 and 14
Pages: 1 2 3 4 5 6

Leave a Reply

Your email address will not be published. Required fields are marked *