7220 CASE IH Magnum Tractor (North America)
7220 CASE IH Magnum Tractor (North America) — parts list, part 3 of 5
Assemblies on this page: Parts list (continued) … Parts list (continued).
Parts list (continued)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 13 | 1286052C1 | 2 | RING, seal, clutch |
| 14 | 1286043C1 | 4 | WASHER, THRUST, bearing |
| 18 | 572182R1 | 2 | BEARING, THRUST, needle |
| 19 | 93350C1 | 6 | RING, retaining, external |
| 20 | 1286012C2 | 26 | WASHER, Belleville spring, return |
| 21 | 1285972C2 | 2 | HOUSING, CLUTCH, CARRIER |
| 22 | 1286081C1 | 2 | O-RING, piston, low clutch inner |
| 23 | 1286076C1 | 2 | RING, piston, clutch, shift |
| 24 | 1285998C1 | 2 | PISTON, clutch, shift |
| 25 | 1286083C1 | 2 | O-RING, piston, low clutch outer |
| 26 | 1286079C1 | 2 | RING, piston, shift |
| 27 | 93129C1 | 6 | WASHER, Belleville spring, cushion |
| 30 | 93190C1 | 2 | DISC, reaction, clutch |
| 31 | 92935C5 | 16 | DISC, friction |
| 32 | 92934C2 | 14 | DISC, separator, clutch |
| 33 | 1342854C2 | 2 | DISC, backing, clutch, 16.45 mm thick, replaces 1342854C1 disc |
| 34 | 1285996C1 | 2 | RING, SNAP, retaining, plate |
| 35 | 1285971C1 | 1 | GEAR, DRIVING, GEAR – driver, 22 teeth, low range |
| 36 | A75211 | 1 | BEARING, CONE, tapered roller |
| 37 | A75210 | 1 | BEARING, CUP, tapered roller |
| 38 | 116797C2 | 1 | RING, seal |
| 39 | 131243R91 | 1 | BEARING, ROLLER, CONE – tapered |
| 40 | 54404R1 | 1 | BEARING, CUP, tapered roller replaces ST967 cup |
| 44 | 1285995C2 | 1 | SUPPORT ASSY., bearing |
| 45 | 814-12050 | 6 | BOLT, Hex, M12 x 50, 8.8 |
| 46 | 1286025C1 | 4 | RING, sealing, shaft |
| 47 | 1342729C1 | 1 | HOUSING, BEARING, bearing |
| 49 | 613-10030 | 3 | BOLT, Hex, M10 x 30, 8.8, Full Thd, BOLT – hex, full threads, 10 – 1.5 x 30 mm |
| 1 | 1997446C2 | 1 | SHAFT ASSY., input, see fig. 6-40 for pins and plugs |
| 2 | 1342729C1 | 1 | HOUSING, BEARING, bearing |
| 3 | 101-11225 | 1 | RING, SNAP, #225, Ext, Replaces 324051R1 ring |
| 4 | 1286027C2 | 1 | RING, retaining |
| 10 | 1342240C1 | 1 | HOUSING, CLUTCH, CARRIER – clutch, master |
| 11 | 93138C1 | 1 | RING, PISTON, piston, clutch |
| 12 | 92562C1 | 1 | RING, seal, piston |
| 13 | 93137C1 | 1 | RING, PISTON, piston, clutch |
| 14 | 92561C1 | 1 | RING, piston, clutch |
| 15 | 112299A1 | 1 | PISTON ASSY., clutch |
| 18 | 93136C2 | 16 | SPRING, clutch |
| 19 | 112329A1 | 1 | RETAINER, spring |
| 21 | 100-11306 | 1 | RING, SNAP, #306, Ext, Replaces 27121R1 |
| 22 | 92555C1 | 1 | RING, seal |
| 23 | 1342241C1 | 1 | HUB, clutch |
| 27 | 100-11200 | 1 | RING, SNAP, #200, Ext, Replaces 665071R1 ring |
| 31 | 1285974C1 | 9 | PLATE, BRAKE, PLATE – separator, clutch |
| 32 | 1285975C2 | 9 | DISC, CLUTCH, friction, clutch |
| 33 | 1963890C1 | 1 | DISC, backing, clutch |
| 34 | 1963876C1 | 1 | RING, SNAP, internal |
| 39 | 1286088C1 | 1 | TUBE, rear, medium clutch |
| 40 | 1286089C1 | 1 | TUBE, rear, high clutch |
| 41 | 1342730C1 | 2 | TUBE, pressure, clutch |
| 43 | 218-5105 | 1 | ELBOW, 90є, 9/16″-18, 37є x 9/16″-18, O-Ring, Adj O-ring boss |
| 45 | 1963935C2 | 1 | TUBE, lube, gear |
| 44 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 1954059C2 | 1 | SHAFT, ASSEMBLY – counter |
| 2 | 38-3605 | 3 | PIN, 3/32″ x 5/16″, Coiled |
| 3 | D63322 | 1 | BEARING, NEEDLE, roller, replaces 1277191C1 bearing |
| 4 | 144348C1 | 1 | RING, SNAP, external |
| 5 | 1286012C2 | 13 | WASHER, Belleville spring |
| 8 | 1286043C1 | 2 | WASHER, THRUST, needle, 2-1/2 inch ID |
| 9 | 572182R1 | 1 | BEARING, THRUST, needle |
| 10 | 583564R1 | 1 | RING, SNAP, #250, 2.356, Ext, RING – snap |
| 11 | 1285978C1 | 1 | PINION, GEAR – driven, 39 teeth, medium range |
| 12 | 1286052C1 | 1 | RING, seal, clutch |
| 13 | 1285980C1 | 1 | PINION, GEAR – driven, 24 teeth, high range |
| 14 | 1286041C2 | 1 | SPACER, gear |
| 15 | 1285990C1 | 1 | PINION, GEAR – driver, 23 teeth, constant mesh |
| 18 | 84986C1 | 1 | BEARING, CONE, tapered roller |
| 19 | 40435 | 1 | BEARING, CUP, tapered roller bearing, replaces 84987C1 cup |
| 20 | 1286042C1 | 4 | WASHER, THRUST, needle, 2-1/4 inch ID |
| 21 | K620185 | 2 | BEARING, THRUST, needle, thrust, replaces 374011R1 bearing |
| 22 | 1285968C3 | 1 | GEAR, driven, low range, 54 teeth |
| 23 | 1286077C1 | 1 | RING, driven, low range |
| 24 | 1286081C1 | 1 | O-RING, piston, low clutch inner |
| 25 | 1285999C2 | 1 | PISTON ASSY., clutch, low |
| 26 | 1286079C1 | 1 | RING, piston, shift |
| 27 | 1286083C1 | 1 | O-RING, piston, low clutch outer |
| 30 | 93129C1 | 3 | WASHER, Belleville spring |
| 31 | 93190C1 | 1 | DISC, reaction, spring |
| 32 | 92935C5 | 13 | DISC, friction, clutch |
| 33 | 92934C2 | 12 | DISC, separator, clutch |
| 34 | 1342854C2 | 1 | DISC, backing, clutch, 16.45 mm thick, replaces 1342854C1 disc |
| 35 | 1285996C1 | 1 | RING, SNAP, retaining, plate |
| 36 | 1286028C2 | 2 | RING, gear, low range |
| 39 | 80907C1 | 2 | BEARING, NEEDLE, caged |
| 40 | 93269C1 | 1 | SPACER, bearing |
| 41 | 1286038C1 | 1 | SPACER, bearing, front |
| 42 | 287679C1 | 1 | BEARING, ROLLER, CONE – tapered |
| 43 | 1968297C1 | 1 | BEARING, CUP, tapered roller |
| 44 | 1342622C1 | 1 | HOUSING, BEARING, bearing |
| 45 | 1286084C1 | 1 | PIN, dowel, 12 x 11 mm |
| 47 | 613-10030 | 4 | BOLT, Hex, M10 x 30, 8.8, Full Thd, BOLT – hex, full threads, 10 – 1.5 x 30 mm |
| 51 | 1286087C1 | 1 | TUBE, rear, low clutch |
| 1 | 92817C2 | 1 | BEVEL GEAR, SET – gear and shaft, bevel pinion |
| 2 | 92825C1 | 1 | PLUG, shaft |
| 3 | 1285991C2 | 1 | PINION, GEAR – driven, constant mesh, 46 teeth |
| 4 | 1286039C1 | 1 | SPACER, bearing, shaft |
| 5 | 143906C1 | 1 | RING, SNAP, retainer, gear |
| 6 | 921684C1 | 1 | BEARING, CONE, tapered roller |
| 7 | 1068263C1 | 1 | CAGE, bearing |
| 8 | 921683C1 | 1 | BEARING, CUP, tapered roller |
| 10 | 120965C1 | 1 | RING, SNAP, retaining, bearing |
| 11 | 108326H | 1 | BEARING, CUP, tapered roller, front |
| 12 | 94666C1 | 1 | BEARING, CONE, tapered roller, front |
| 18 | 30451R1 | 6 | SCREW, 12 Pt Hd, M10 x 35, 12.9, 12 point flanged, 12 x 35 mm, class 12.9 |
| 19 | 1251958C1 | 6 | WASHER, flat, cage screw |
| 2 | 1997705C1 | 1 | CAGE, CASE – differential, right |
| 3 | 137023A1 | 6 | DOWEL, PIN – 10 x 60 mm, hardened |
| 4 | 148939C1 | 2 | SEAL, RING |
| 7 | 1264796C2 | 1 | GEAR, bevel, differential, 20 teeth |
| 8 | 92905C1 | 4 | PINION, GEAR – bevel, differential, 10 tooth |
| 9 | 1264795C2 | 1 | GEAR, lock, bevel, 20 teeth |
| 10 | 92767C1 | 1 | WASHER, thrust, lock |
| 11 | 92768C1 | 1 | WASHER, thrust, differential |
| 12 | 92718C2 | 4 | WASHER, thrust, pinion, replaces 92718C1 washer |
| 13 | 92906C1 | 2 | SHAFT, SHORT, pinion, short |
| 14 | 92907C1 | 1 | SHAFT, pinion, long |
| 15 | 1997421C1 | 2 | BOLT, BOLT – pin, pinion |
| 19 | 1289349C1 | 1 | SPACER, pinion, long |
| 20 | 1289350C1 | 2 | SPACER, pinion, short |
| 21 | 1270697C1 | 112 | NEEDLE, BEARING |
| 22 | 1289348C1 | 4 | RING, thrust, bearing |
| 23 | 622336C1 | 1 | BEARING, CONE, tapered roller, 3.348 inch ID |
| 25 | A63171 | 1 | BEARING, CUP, tapered roller, replaces 622337C1 cup |
| 29 | 229593A1 | 1 | COVER, case, differential replaces 92800C2 cover |
| 30 | 896-11016 | 12 | WASHER, M17.5 x 30 x 4, HT |
| 31 | 828-16055 | 12 | BOLT, Hex, M16 x 55, 10.9, Full Thd, Bolt, Hex, M16 x 55, 10.9, Full Thd |
| 32 | 67250C1 | 1 | BEARING, BALL, tapered roller, 3.543 inch ID |
| 33 | 67251C1 | 1 | BEARING, CUP, tapered roller |
| 34 | 92892C1 | 1 | RETAINER, bearing, left |
| 35 | 136433A1 | 5 | DOWEL, PIN – 12 x 65 mm, hardened |
| 36 | 139059C1 | 1 | SEAL, oil, retainer |
| 40 | 139060C2 | 1 | RING, seal, bearing, replaces 148941C1 ring |
| 41 | 1997368C1 | 1 | RETAINER, bearing, right |
| 43 | 136433A1 | 5 | DOWEL, PIN – 12 x 65 mm, hardened |
| 44 | 139059C1 | 1 | SEAL, oil, retainer |
| 45 | 139060C2 | 1 | RING, seal, retainer, replaces 148941C1 ring |
| 46 | 613-16040 | 3 | BOLT, Hex, M16 x 40, 8.8, Full Thd, Bolt, Hex, M16 x 40, 8.8, Full Thd, left retainer |
| 46 | 613-16045 | 3 | BOLT, Hex, M16 x 45, 8.8, Full Thd, Bolt, Hex, M16 x 45, 8.8, Full Thd, right retainer |
| 50 | 1997422C1 | 1 | PISTON, lock, differential |
| 55 | 120679C1 | 3 | PLATE, friction |
| 56 | 92915C1 | 4 | PLATE, separator |
| 57 | 1264894C1 | 1 | TUBE, pressure, lock |
| 58 | 238-5115 | 1 | O-RING, -115, 70 Duro, .674″ ID x .103″ Thk |
| 1 | 94809C3 | 1 | COVER ASSY, lock, park |
| 2 | 837-10025 | 2 | DOWEL, M10 x 25, dowel, 10 x 25 mm, hardened |
| 3 | 613-10030 | 3 | BOLT, Hex, M10 x 30, 8.8, Full Thd, BOLT – hex, full threads, 10 – 1.5 x 30 mm |
| 3 | 814-10040 | 2 | BOLT, Hex, M10 x 40, 8.8, Full Thd |
| 4 | G105118 | 1 | SEAL, oil (replaces A50421) |
| 5 | 94811C3 | 1 | LEVER, pawl, lock, replaces 94811C2 lever |
| 9 | 148740C1 | 1 | PIN, LARGE, SHAFT – pawl, lock |
| 10 | 838-3645 | 1 | PIN, M6 x 45, Coiled, 6 x 45 mm, replaces 30681R1 pin |
| 11 | 94813C1 | 1 | ROD, ASSEMBLY – pull, lever |
| 12 | 838-3640 | 1 | PIN, M6 x 40, Coiled, Roll, Replaces 838-3636 pin |
| 17 | 1968499C1 | 1 | SPRING, holddown lock |
| 18 | 495-11081 | 1 | WASHER, 3/4″, SAE, If used |
| 19 | 527-201 | 1 | PIN, CLEVIS, M8 x 25, clevis, 8 x 25 mm, replaces 30569R1 pin |
| 20 | 895-11008 | 2 | WASHER, M8 x 16 x 1.6, Replaces 934675R1 8 x 17 x 2 mm washer used on some models |
| 21 | 732-2016 | 2 | PIN, SPLIT (COTTER), M2 x 16, 2 x 16 mm |
| 22 | 148743C1 | 1 | BAR, LINK – overcenter, lock |
| 26 | 1954042C2 | 1 | DRIVE, ANGLE, BELLCRANK – overcenter |
| 27 | 729-835 | 1 | PIN, CLEVIS, M8 x 35, 8 x 35 mm, hardened |
| 28 | 728-1680 | 1 | PIN, CLEVIS, M16 x 80, clevis, 16 x 80 mm, hardened |
| 29 | 495-81175 | 1 | WASHER, 21/32″ x 1″ x .120″, flat, 21/32 x 1 x 7/64 inch |
| 30 | 732-4025 | 1 | PIN, SPLIT (COTTER), M4 x 25, 4 x 25 mm |
| 31 | 94795C1 | 1 | BUSHING, LARGE, bellcrank |
| 32 | 94796C1 | 1 | BUSHING, LARGE, BEARING – bellcrank |
| 33 | 1334342C1 | 1 | BRACKET, cable |
| 36 | 814-10045 | 1 | BOLT, Hex, M10 x 45, 8.8 |
| 37 | 814-10060 | 1 | BOLT, Hex, M10 x 60, 8.8 |
| 41 | 76349 | 1 | PLUG, Hex Hd, 9/16″-18 ORB |
| 42 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 1981906C3 | 1 | LEVER, ASSEMBLY – park lock |
| 3 | 96423C1 | 1 | BEARING, NEEDLE, needle |
| 4 | 1340016C1 | 1 | BOLT, SPREADER, shoulder, pivot |
| 5 | 1267745C3 | 1 | CABLE, ASSEMBLY – park lock |
| 6 | 425-154 | 2 | NUT, Jam, 1/4″-28, G5 |
| 7 | 425-1510 | 2 | NUT, Jam, 5/8″-18, G5, Hex |
| 8 | 495-21069 | 2 | WASHER, 5/8″, flat, 11/16 x 1-3/4 x 9/64 inch |
| 9 | 96989C2 | 1 | GROMMET, cable |
| 10 | 213-124 | 1 | CLEVIS, ADJUSTABLE, 1/4″-28, Replaces 213-31 |
| 11 | 427-4077 | 2 | PIN, CLEVIS, 1/4″ x .770″, Hardened |
| 12 | 28787R1 | 1 | CLEVIS COUPLING, cable |
| 14 | 432-48 | 2 | PIN, SPLIT (COTTER), 1/16″ x 1/2″ |
| 15 | 120008C1 | 1 | CLAMP, cable |
| 16 | 892-11004 | 2 | WASHER, LOCK, M4 |
| 17 | 863-4012 | 2 | SCREW, Hex Soc Hd, M4 x 12, 12.9, BOLT – hex socket, 4 – 0.7 x 12 mm, class 10.9, replaces |
| 1 | 120174C1 | 1 | SUPPORT, ASSEMBLY – pivot |
| 2 | 120173C1 | 1 | BUSHING, pivot |
| 3 | 1252700C1 | 1 | SUPPORT ASSY., pivot, pedal |
| 4 | 413-620 | 2 | BOLT, Hex, 3/8″-16 x 1 1/4″, G5, Full Thd, hex, 3/8 NC x 1-1/4 inch |
| 5 | 425-166 | 2 | NUT, 3/8″-16, G5, Hvy, heavy hex, 3/8 inch NC |
| 6 | 413-612 | 4 | BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd, hex, 3/8 NC x 3/4 inch |
| 7 | 1340256C1 | 1 | PEDAL, clutch |
| 10 | 495-81120 | 1 | WASHER, .344″ x 1 1/4″ x .120″, flat, 11/32 x 1-1/4 x 7/64 inch |
| 11 | 413-512 | 1 | BOLT, Hex, 5/16″-18 x 3/4″, G5, Full Thd, hex, 5/16 NC x 3/4 inch |
| 12 | 96897C2 | 1 | SPRING, return, replaces 1990620C1 spring |
| 13 | 1990549C1 | 1 | ARM, lever, pedal |
| 14 | 96481C2 | 1 | CABLE, clutch, includes Ref 34 grommet |
| 15 | 425-154 | 2 | NUT, Jam, 1/4″-28, G5 |
| 16 | 425-1510 | 3 | NUT, Jam, 5/8″-18, G5, Hex |
| 17 | 495-21069 | 2 | WASHER, 5/8″, flat, 11/16 x 1-3/4 x 9/64 inch |
| 18 | 118156C1 | 1 | CONDUIT, SLEEVE – corrugated, cut from 1536137C1 bulk sleeve |
| 19 | 213-124 | 1 | CLEVIS, ADJUSTABLE, 1/4″-28, Replaces 213-31 |
| 20 | 427-4077 | 1 | PIN, CLEVIS, 1/4″ x .770″, Hardened |
| 21 | 432-48 | 1 | PIN, SPLIT (COTTER), 1/16″ x 1/2″ |
| 22 | 1340478C1 | 1 | HOUSING, support, cable |
| 23 | 1280055C2 | 1 | FLANGE, housing |
| 24 | 864-6016 | 2 | SCREW, Hex Soc Hd, M6 x 16, 8.8 |
| 25 | 97238C1 | 1 | SPACER, flange, housing |
| 29 | 96790C2 | 1 | CLEVIS COUPLING, cable |
| 30 | 96846C2 | 1 | PIN, AXLE, clevis |
| 31 | 732-2012 | 1 | PIN, SPLIT (COTTER), M2 x 12, 2 x 12 mm |
| 32 | 97202C1 | 1 | BALL JOINT, END |
| 33 | 414-614 | 1 | BOLT, Hex, 3/8″-24 x 7/8″, G5, Full Thd, BOLT – hex, 3/8 NF x 7/8 inch |
| 34 | 96989C2 | 1 | GROMMET, cable, included with Ref 14 cable |
| 37 | 96934C3 | 1 | BRACKET, stop, pedal |
| 38 | 614-8030 | 1 | BOLT, Hex, M8 x 30, 8.8, Full Thd |
| 39 | 825-1408 | 1 | NUT, M8, Cl 8 |
| 40 | 614-10025 | 3 | BOLT, Hex, M10 x 25, 8.8, Full Thd |
| 41 | 825-1410 | 2 | NUT, M10, Cl 8 |
| 42 | 892-11010 | 3 | WASHER, LOCK, M10 |
| 1 | 1280096C1 | 1 | KNOB, handle |
| 2 | 96487C4 | 1 | HANDLE, LEVER – shift control handle |
| 3 | 96580C3 | 2 | SUPPORT, BLOCK – bearing |
| 4 | 96579C1 | 1 | BEARING, NEEDLE, needle |
| 5 | 96637C1 | 4 | SCREW, BOLT – hex socket head, 4 x 35 mm |
| 6 | 96982C1 | 2 | WASHER, beveled, handle pivot |
| 7 | 97202C1 | 1 | BALL JOINT, END |
| 8 | 414-614 | 1 | BOLT, Hex, 3/8″-24 x 7/8″, G5, Full Thd, BOLT – hex, 3/8 NF x 7/8 inch |
| 10 | 1340129C2 | 1 | CLEVIS, cable |
| 11 | 427-6156 | 1 | PIN, CLEVIS, 3/8″ x 1 9/16″, Hardened, Replaces 23304R1 pin |
| 12 | 495-11041 | 1 | WASHER, 3/8″, SAE, Flat, (13/32 x 13/16 x 1/16″) |
| 13 | 432-616 | 1 | PIN, SPLIT (COTTER), 3/32″ x 1″ |
| 15 | 1343929C2 | 1 | CABLE ASSY., speed |
| 16 | 1344098C1 | 1 | SUPPORT, BRACKET – cable |
| 17 | 614-8025 | 2 | BOLT, Hex, M8 x 25, 8.8 |
| 18 | 892-11008 | 2 | WASHER, LOCK, M8 |
| 19 | 1344178C1 | 1 | CLAMP, cable |
| 20 | 1344099C1 | 1 | BLOCK, SHIM – clamp |
| 21 | 628-6020 | 2 | BOLT, Hex, M6 x 20, 10.9, Full Thd, BOLT – hex, full threads, 6 – 1.0 x 20 mm, class 10.9 |
| 22 | 832-41306 | 2 | NUT, LOCK, M6 x 1, Cl 10 |
| 25 | 310673R1 | 1 | BALL JOINT |
| 26 | 230-4715 | 1 | NUT, LOCK, 5/16″-24, GA, Hex |
| 27 | 1344234C1 | 1 | WASHER, cable |
| 28 | 1987155C1 | 1 | LEVER, BELLCRANK – speed, Inc. 29 |
| 29 | 1344333C1 | 2 | BUSHING, LARGE, speed shift lever |
| 30 | 1251551C1 | 2 | WASHER, flat, shaft |
| 31 | 100-1675 | 1 | RING, SNAP, #75, Ext, Replaces 23090R1 |
| 32 | 96992C2 | 1 | SUPPORT ASSY., bellcrank |
| 33 | 854-10030 | 2 | BOLT, Hex Flg, M10 x 30, 10.9, BOLT – heavy hex flange, 10 – 1.5 x 30 mm, class 10.9 |
| 34 | 1283945C1 | 1 | SHAFT, bellcrank |
| 35 | 30394R1 | 1 | PIN, LOCK, M6 x 50, Slotted, slotted spring, 6 x 50 mm |
| 36 | 1283926C1 | 1 | ROD, speed link |
| 37 | D149295 | 1 | BALL JOINT, rod, replaces 158397H1 ball joint |
| 38 | D133522 | 1 | BALL JOINT, rod |
| 39 | 232-4616 | 2 | NUT, LOCK, 3/8″-24, GC |
| 40 | 1987022C1 | 1 | SUPPORT, handle, shift |
| 41 | 96585C1 | 1 | SHAFT, trunnion |
| 42 | 838-3420 | 1 | PIN, M4 x 20, Coiled, roll, 4 x 20 mm |
| 43 | 614-8025 | 2 | BOLT, Hex, M8 x 25, 8.8 |
| 44 | 1340024C2 | 1 | TRUNNION, ASSEMBLY – pivot, tractors with 3 and 4 reverse |
| 45 | 96579C1 | 2 | BEARING, NEEDLE, needle |
| 46 | 425-156 | 1 | NUT, Jam, 3/8″-24, G5 |
| 47 | 281800C2 | 1 | BALL JOINT, cable |
| 48 | 96612C3 | 1 | CABLE ASSY., shift, F-N-R |
| 49 | 425-154 | 2 | NUT, Jam, 1/4″-28, G5 |
| 50 | 425-157 | 2 | NUT, Jam, 7/16″-20, G5 |
| 51 | 495-81120 | 2 | WASHER, .344″ x 1 1/4″ x .120″, flat, 11/32 x 1 -1/4 x 7/64 inch |
| 52 | 425-1510 | 1 | NUT, Jam, 5/8″-18, G5, Hex |
| 53 | 96988C2 | 1 | GROMMET, cable |
| 54 | 118156C1 | 1 | CONDUIT, SLEEVE – corrugated, cable, cut from 1536137C1 bulk sleeve |
| 55 | 1340478C1 | 1 | HOUSING, support, cable |
| 56 | 1280055C2 | 1 | FLANGE, cable support housing |
| 57 | 97238C1 | 1 | SPACER, cable support housing |
| 58 | 864-6016 | 2 | SCREW, Hex Soc Hd, M6 x 16, 8.8 |
| 59 | 96790C2 | 1 | CLEVIS COUPLING, cable |
| 60 | 96846C2 | 1 | PIN, AXLE, clevis |
| 61 | 732-2012 | 1 | PIN, SPLIT (COTTER), M2 x 12, 2 x 12 mm |
| 62 | 129-289 | 1 | NUT, Jam, 3/8″-24, G5, LH |
| 1 | 1997873C1 | 1 | SHAFT, clutch, used with 3/4 inch adapter, item 69, no longer available, order 137221A1 shaft and |
| 2 | 877-11010 | 1 | SET SCREW, Hex Soc, M10 x 10, Cup Pt, set, hex socket, 10 – 1.5 x 10 mm, flat point |
| 3 | 630694C1 | 2 | BEARING, CONE, tapered roller |
| 4 | 630695C1 | 2 | BEARING, CUP, tapered roller |
| 5 | 1997874C1 | 1 | GEAR, driven, MFD, 46 teeth |
| 6 | 101-21412 | 2 | RING, SNAP, #412, 4.430″, Int |
| 7 | 128297A1 | 1 | DISC, CLUTCH, PLATE – clutch backing, no holes, 48 teeth |
| 8 | 101-11400 | 1 | RING, SNAP, #400, 3.771, Ext, RING – external retaining, No. 400, external |
| 9 | 128114A1 | 12 | DISC, clutch separator |
| 10 | 1997907C1 | 13 | PLATE, friction |
| 11 | 92562C1 | 1 | RING, seal, clutch hub to actuator |
| 12 | 93138C1 | 1 | RING, PISTON, piston, clutch hub to actuator |
| 13 | 1997879C1 | 1 | SEAL, RING – sealing, clutch hub to actuator |
| 14 | 238-7037 | 1 | O-RING, -037, Cl 7, 2.489″ ID x .070″ Thk |
| 15 | 123135A1 | 1 | WASHER, spring retainer |
| 16 | 123517A1 | 1 | SNAP RING, retaining, external |
| 18 | 121192A1 | 1 | WASHER, THRUST |
| 19 | 1997880C1 | 4 | SPRING, BELLEVILLE, clutch |
| 20 | 1997877C1 | 1 | PISTON, ACTUATOR – clutch |
| 21 | 1997897C1 | 2 | RING, sealing |
| 22 | 1997885C1 | 1 | SEAL, OIL, oil |
| 23 | 1997891C1 | 1 | RING, SNAP, retaining, external |
| 24 | 1277309C1 | 1 | WASHER, RING – backup |
| 28 | 1997923C1 | 1 | SHIELD, gear, front |
| 30 | 1997881C1 | 1 | SHIELD, gear, rear |
| 31 | 806-8016 | 3 | BOLT, Hex, Lock, M8 x 16, Cl 10.9, BOLT – hex, self-locking, 8 – 1.25 x 16 mm, class 10.9, locking |
| 32 | 1997924C1 | 1 | SHIELD, clutch |
| 33 | 93201C1 | 1 | TUBE, TUBE – inlet, oil |
| 34 | 238-5013 | 2 | O-RING, -013, 70 Duro, .426″ ID x .070″ Thk |
| 35 | 201-102 | 1 | CONNECTOR, HYD., 13/16″-16 ORFS x 3/4″-16 ORB |
| 36 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 37 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 38 | 613-16030 | 2 | BOLT, Hex, M16 x 30, 8.8, Full Thd, Bolt, Hex, M16 x 30, 8.8, Full Thd, if used, may be replaced by |
| 39 | 896-11016 | 2 | WASHER, M17.5 x 30 x 4, HT, If Used |
| 40 | 238-5114 | 2 | O-RING, -114, 70 Duro, .612″ ID x .103″ Thk, If used |
| 67 | 814-10050 | 6 | BOLT, Hex, M10 x 50, 8.8 |
| 68 | 124306A1 | 1 | PIPE, TUBE – lube, supply |
| 69 | 218-5059 | 1 | CONNECTOR, HYD., 3/4″-16, 37є x 3/4″-16, O-Ring, ADAPTER – straight, 3/4-16 inch flare x O-ring |
| 72 | 863-4012 | 4 | SCREW, Hex Soc Hd, M4 x 12, 12.9, BOLT – hex socket, 4 – 0.7 x 12 mm, class 10.9 |
| 73 | 1997876C1 | 1 | PLATE, THRUST, clutch backing, four mounting holes, 48 teeth |
| 75 | A13083 | 1 | BEARING, needle, outer, clutch hub |
| 76 | T15025 | 1 | BEARING, needle, inner, clutch hub |
| 77 | 829-1316 | 2 | NUT, M16, Cl 10 |
| 78 | 137221A1 | 1 | SHAFT, clutch, used with 9/16 inch adapter, item 79 |
| 79 | 218-5351 | 1 | CONNECTOR, HYD., 3/4″-16, 37є x 9/16″-18, O-Ring, ADAPTER – straight, 3/4-16 flare x 9/16-18 inch |
| 81 | 605-16020 | 2 | BOLT, Hex, Lock, M16 x 20, Cl 8.8, BOLT – hex, locking, 16 – 2.0 x 20 mm, replaces items 38-40 on |
| 80 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 93381C1 | 1 | SHAFT, drive |
| 2 | 93326C1 | 2 | SPIDER, U-JOINT, ASSEMBLY – shaft |
| 3 | A17298 | 4 | BOLT, hex, special, spider |
| 4 | 110840A1 | 1 | YOKE, shaft |
| 5 | 328-628 | 4 | BOLT, Hex, 3/8″-24 x 1 3/4″, G8, BOLT – hex, 3/8 NF x 1-3/4 inch, grade 8 |
| 11 | 93199C1 | 2 | FASTENER, ratchet, Part of the Attachment Kit P/N A67916 |
| 12 | 119491A1 | 1 | HOUSING, flywheel, see Fig. 2-98 or 2-100 for related parts |
| 13 | 1342533C1 | 1 | CAGE, shaft output |
| 14 | 1997786C1 | 1 | TUBE, front cage, 178 mm long, A dimension is 140 mm, B dimension is 19 mm long |
| 15 | 238-7132 | 2 | O-RING, 1 3/4″ ID X 1 15/16″ OD, Cl 7, (Replaces 238-5132), if used |
| 15 | 193478A1 | 2 | SEALRING, quad, if used |
| 17 | 1342540C1 | 1 | SPACER, bearing, output shaft |
| 18 | 20879D | 2 | BEARING, CONE, tapered roller |
| 19 | ST991 | 2 | BEARING, CUP, tapered roller bearing |
| 20 | 1259828C1 | 1 | RING, retaining, external, optional with 100-16131 |
| 23 | 101-21268 | 1 | RING, SNAP, #268, 2.868″, Int, RING – internal retaining, No. 268 |
| 24 | 1997920C1 | 1 | SEAL, oil, shaft |
| 26 | 814-12045 | 2 | BOLT, Hex, M12 x 45, 8.8, BOLT – hex, 12 – 1.75 x 45 mm |
| 27 | 896-11012 | 2 | WASHER, M13.5 x 24.5 x 3, HT |
| 28 | 124414A1 | 1 | SHAFT, output |
| 29 | 1342534C1 | 1 | PIN, LARGE, roll |
| 30 | 38834 | 1 | BEARING, ROLLER, needle, clutch housing, replaces 220304R1 bearing |
| 1 | 120942C2 | 2 | GEAR, ring, axle |
| 2 | 1968489C1 | 2 | CARRIER, ASSEMBLY – axle |
| 3 | 837-16040 | 2 | DOWEL, M16 x 40, Hardened |
| 4 | 630899C1 | 1 | BEARING, CUP, tapered roller |
| 5 | 619697C1 | 1 | BEARING, CUP, tapered roller, inner |
| 6 | 813-16120 | 32 | BOLT, Hex, M16 x 120, 8.8, BOLT – hex, 16 – 2.0 x 120 mm |
| 7 | 1968338C4 | 2 | SHAFT, AXLE ASSEMBLY – rear, 4 inch diameter x 112 inch |
| 7 | 1968339C3 | 2 | SHAFT ASSY., AXLE – rear, 4 inch diameter x 96 inch |
| 8 | 1981270C1 | 1 | INSERT, rear axle |
| 9 | 1968334C1 | 1 | BUSHING, spacer, bearing |
| 10 | 238-5241 | 2 | O-RING, -241, 70 Duro, 3.859″ ID x .139″ Thk |
| 11 | 630874C1 | 2 | BEARING, CONE, tapered roller, outer |
| 12 | 123869R1 | 2 | BEARING, CONE, tapered roller, inner |
| 16 | 124744C1 | 2 | RING, thrust, axle |
| 17 | 1277020C2 | 2 | RING, retaining, axle |
| 18 | 92689C1 | 1 | SEAL, oil, oversize |
| 19 | 92687C1 | 1 | SLEEVE, wear |
| 20 | 1349355C1 | 2 | PINION CARRIER, gear, planet |
| 21 | 1349354C2 | 6 | PINION, GEAR – planet, 27 teeth |
| 22 | 1349348C1 | 6 | RING, THRUST |
| 23 | 1349353C1 | 348 | NEEDLE, BEARING |
| 24 | 1997886C1 | 12 | WASHER, THRUST |
| 25 | 1349352C1 | 6 | SHAFT, bearing, planet gear |
| 26 | 838-3826 | 6 | PIN, M8 x 26, Coiled, roll, 8 x 26 mm, replaces 30355R1 pin |
| 30 | 101-11350 | 2 | RING, SNAP, #350, Ext, Replaces 598318R1 |
| 34 | 1981238C1 | 2 | SHAFT, sun gear, final drive |
| 35 | 84842C1 | 2 | SEAL ASSY., oil, regular, see 94547C1 kit above |
| 1 | 120942C2 | 2 | GEAR, ring, axle |
| 2 | 1342268C1 | 2 | CARRIER, ASSEMBLY – axle |
| 3 | 837-16040 | 2 | DOWEL, M16 x 40, Hardened |
| 4 | 1975500C1 | 1 | BEARING, CUP, tapered roller |
| 5 | 619697C1 | 1 | BEARING, CUP, tapered roller, inner |
| 6 | 813-16120 | 32 | BOLT, Hex, M16 x 120, 8.8, BOLT – hex, 16 – 2.0 x 120 mm |
| 7 | 1342484C3 | 2 | AXLE, REAR, ASSEMBLY – 4 inch diameter x 118 inch |
| 8 | 1981270C1 | 1 | INSERT, rear axle |
| 9 | 1963837C1 | 1 | BUSHING, spacer, bearing |
| 10 | 238-5155 | 2 | O-RING, -155, 70 Duro, 3.987″ ID x .103″ Thk |
| 11 | 1975499C1 | 2 | BEARING, CONE, tapered roller, outer |
| 12 | 1963841C1 | 2 | BEARING, CONE, tapered roller, inner |
| 16 | 124744C1 | 2 | RING, thrust, axle |
| 17 | 1277020C2 | 2 | RING, retaining, axle |
| 18 | 1349184C1 | 1 | SLEEVE, wear |
| 19 | 1349183C1 | 1 | SEAL, OIL, oil, oversize |
| 20 | 1349355C1 | 2 | PINION CARRIER, gear, planet |
| 21 | 1349354C2 | 6 | PINION, GEAR – planet, 27 teeth |
| 22 | 1349348C1 | 6 | RING, THRUST |
| 23 | 1349353C1 | 348 | NEEDLE, BEARING |
| 24 | 1997886C1 | 12 | WASHER, THRUST |
| 25 | 1349352C1 | 6 | SHAFT, bearing, planet gear |
| 26 | 838-3826 | 6 | PIN, M8 x 26, Coiled, roll, 8 x 26 mm, replaces 30355R1 pin |
| 30 | 101-11350 | 2 | RING, SNAP, #350, Ext, Replaces 598318R1 |
| 34 | 1981238C1 | 2 | SHAFT, sun gear, final drive |
| 35 | 1963839C1 | 2 | SEAL, oil, regular, see 1349182C1 kit above |
| 1 | 1347908C2 | 1 | HOUSING, ASSEMBLY – axle, rear, shown, prior to transmission serial number AJB0076737 |
| 2 | 837-16035 | 1 | DOWEL, M16 x 35, PIN – 16 x 35 mm, hardened |
| 3 | 837-12025 | 2 | DOWEL, M12 x 25, Hardened |
| 4 | 837-16040 | 4 | DOWEL, M16 x 40, Hardened |
| 5 | 19994R1 | 2 | DOWEL, 3/4″ x 2″, dowel, 3/4 x 2 inch, 1347908C2 housing |
| 5 | 37-11232 | 2 | DOWEL, 3/4″ x 2″, dowel, 3/4 x 2 inch, hardened, 220300A1 housing |
| 6 | 1347905C1 | 2 | BUSHING, LARGE, bracket anchor |
| 8 | 217-439 | 2 | PLUG, Hex Soc, 1/2″-14, hex socket headless, 1/2 inch PT, 1347908C2 housing |
| 8 | 192791A1 | 2 | PLUG, hex socket, 1/2 inch PT, 220300A1 housing |
| 9 | 217-442 | 1 | PLUG, Hex Soc, 3/4″-14, hex socket headless, 3/4 inch PT, 1347908C2 housing |
| 9 | 192792A1 | 1 | PLUG, square countersunk 3/4-14 inch thread, 220300A1 housing |
| 10 | 93200C1 | 1 | UNION, ADAPTER – bulkhead, 11/16-16 face seal x 9/16-18 inch flare |
| 11 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 12 | 218-1254 | 1 | NUT, LOCK, Blkhd, 9/16″-18, Hex |
| 18 | 1349158C1 | 1 | TUBE, lubrication, bevel gear |
| 19 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 20 | 239-5112 | 1 | O-RING, Rect, .5″ ID x .688″ OD, Cl 5 |
| 21 | 613-10020 | 1 | BOLT, Hex, M10 x 20, 8.8, Full Thd, BOLT – hex, full threads, 10 – 1.5 x 20 mm |
| 22 | 892-11010 | 1 | WASHER, LOCK, M10 |
| 23 | 613-12025 | 1 | BOLT, Hex, M12 x 25, 8.8, Full Thd, BOLT – hex, full threads, 12 – 1.75 x 25 mm |
| 24 | 892-11012 | 1 | WASHER, LOCK, M12 |
| 28 | 201-305 | 3 | ELBOW, 90є, 13/16″-18 x 3/4″-18 Adj, ORFS, 90 degree, 13/16-16 face seal x 3/4-16 inch adj O-ring |
| 29 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk, Boss end |
| 30 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk, Face end |
| 31 | 201-402 | 1 | TEE, 13/16″-18 x 3/4″-16 Br, ORFS, 3/4-16 adj O-ring branch x 13/16-16 inch face x face |
| 32 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk, Boss end |
| 33 | 238-6014 | 2 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk, Face end |
| 34 | 1997476C1 | 1 | PLATE, LARGE, adapter, PTO |
| 35 | 1981233C2 | 1 | BAR, BRACKET – adapter, PTO |
| 36 | 628-12030 | 2 | BOLT, Hex, M12 x 30, 10.9, Full Thd, Replaces 931703R1 bolt |
| 40 | 103141A1 | 1 | PIPE, TUBE – oil fill |
| 41 | 613-12035 | 2 | BOLT, Hex, M12 x 35, 8.8, Full Thd, BOLT – hex, full threads, 12 – 1.75 x 35 mm |
| 42 | 108522C1 | 2 | WASHER, copper seal, 1/2 x 23/32 x 1/16 inch, no longer used in this application, order item 49 gasket |
| 43 | 139395C1 | 1 | GASKET, tube, dipstick guide |
| 44 | 831821C1 | 1 | PLUG, CAP – fill, transmission |
| 49 | B17501 | 1 | LOCTITE, SEALANT – Gasket Maker No. 515, 6 ml tube, liquid |
| 50 | 828-20080 | 6 | BOLT, Hex, M20 x 80, 10.9 |
| 1 | 1342329C1 | 1 | HOUSING, ASSEMBLY – drive, transmission pump |
| 4 | 613-10030 | 6 | BOLT, Hex, M10 x 30, 8.8, Full Thd, BOLT – hex, full threads, 10 – 1.5 x 30 mm |
| 4 | 814-10040 | 2 | BOLT, Hex, M10 x 40, 8.8, Full Thd |
| 5 | 1286045C1 | 1 | GEAR WHEEL, idler, 65 teeth |
| 8 | 472163R1 | 2 | RING, retaining |
| 9 | 93315C1 | 2 | BEARING, ball |
| 10 | 93316C1 | 1 | SPACER, gear, idler |
| 11 | 1286151C1 | 1 | SHAFT, gear, idler |
| 12 | 814-10130 | 1 | BOLT, Hex, M10 x 130, 8.8 |
| 13 | 896-12010 | 1 | WASHER, M10 x 21.5 x 2.5, HT, flat, 11 x 21 x 2.5 mm, hardened |
| 14 | 1342330C1 | 1 | PINION, GEAR – drive, pump |
| 18 | 399933C91 | 2 | BEARING, CONE, tapered roller, 1-25/32 inch ID |
| 19 | 399934C1 | 2 | BEARING, CUP, tapered roller, 2-57/64 inch OD |
| 20 | 1342331C1 | 1 | CAGE, bearing |
| 21 | 238-5257 | 1 | O-RING, -257, 70 Duro, 5.859″ ID x .139″ Thk |
| 23 | 613-10030 | 4 | BOLT, Hex, M10 x 30, 8.8, Full Thd, BOLT – hex, full threads, 10 – 1.5 x 30 mm |
| 30 | 1286014C1 | 1 | GEAR WHEEL, drive, 54 teeth, pump, P.T.O. |
| 31 | 238-5216 | 1 | O-RING, -216, 70 Duro, 1.109″ ID x .139″ Thk, PTO drive |
| 32 | 1286023C1 | 1 | RING, seal, gear, P.T.O. drive |
| 33 | 100-11237 | 1 | RING, SNAP, #237, Ext, Replaces 114349H1 ring, PTO drive |
| 34 | ST269A | 1 | BEARING, BALL, clutch housing, shaft, replaces A20291 bearing, P.T.O. drive |
| 35 | 101-21433 | 1 | RING, SNAP, #433, 4.641″, Int, Replaces 895107C1, PTO Drive |
| 1 | 1280389C2 | 1 | HANDLE, LEVER – control handle, PTO, for electrically operated PTO, see fig. 4-2 for PTO toggle |
| 2 | 1283599C1 | 1 | BUSHING, pivot |
| 3 | 1283907C1 | 1 | GRIP, control lever |
| 4 | 1280308C2 | 1 | CABLE, ASSEMBLY – PTO control, for electrically operated PTO, see fig. 4-2 for PTO toggle switch |
| 5 | 425-1510 | 3 | NUT, Jam, 5/8″-18, G5, Hex |
| 6 | 495-21069 | 2 | WASHER, 5/8″, flat, 11/16 x 1-3/4 x 9/64 inch |
| 7 | 495-11028 | 2 | WASHER, 1/4″, SAE, flat, 9/32 x 5/8 x 1/16 inch |
| 8 | 432-48 | 2 | PIN, SPLIT (COTTER), 1/16″ x 1/2″ |
| 9 | 1344103C1 | 1 | WASHER, split, cable |
| 12 | 97237C1 | 1 | PIN, AXLE, clevis |
| 13 | 1280055C2 | 1 | FLANGE, cable support housing |
| 14 | 1340478C1 | 1 | HOUSING, support, cable |
| 15 | 97238C1 | 1 | SPACER, cable support housing |
| 16 | 879-10625 | 2 | SET SCREW, Hex Soc, M6 x 20, Cup Pt, set, hex socket, 6 x 25 mm |
| 17 | 825-2406 | 2 | NUT, M6 x 1, Flg, Cl 8 |
| 1 | 1978558C3 | 1 | GUARD, SHIELD – PTO guard (Also order 1960744C2 decal on fig. 9-150), replaces 1978558C2 shield |
| 2 | 1987302C1 | 1 | SUPPORT, BRACKET – PTO shield, right |
| 3 | 1987301C1 | 1 | SUPPORT, BRACKET – PTO shield, left |
| 4 | 895-11010 | 4 | WASHER, M10 x 20 x 2 |
| 7 | 445-58 | 1 | RIVET, But Hd, 5/16″ x 1/2″, round head, 5/16 x 1/2 inch |
| 8 | 131-868 | 1 | NUT, 5/16″, Sq, Push-on, push-on type, 1/4 inch |
| 10 | 439-1864 | 1 | PIN, HEADED, 1/2″ x 4″, headed, 1/2 x 4 inch, grade 2 |
| 11 | 1340500C1 | 2 | SPACER, bracket, upper |
| 12 | 1340501C1 | 1 | STEM, ROD – pivot, shield |
| 13 | 892-11010 | 4 | WASHER, LOCK, M10 |
| 14 | 614-10025 | 4 | BOLT, Hex, M10 x 25, 8.8, Full Thd |
| 15 | 495-11053 | 1 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 16 | 399635R1 | 1 | SPRING, VALVE, tension, pivot rod |
| 17 | 1340505C1 | 1 | SLEEVE ASSY, pivot |
| 18 | 438-11214 | 2 | PIN, LOCK, 3/16″ x 7/8″, Slotted, 3/16″ x 7/8″, Slotted |
| 1 | 1997689C1 | 1 | SEAL, clutch drive shaft to backing plate |
| 3 | 205369R91 | 1 | BEARING, NEEDLE, needle, shaft, inner |
| 4 | R21491 | 1 | BEARING, NEEDLE, needle, 1-3/4 inch OD, shaft, outer |
| 5 | 381492R1 | 1 | CIRCLIP, RING – snap, clutch driven disc |
| 6 | 1997561C2 | 1 | PLATE, LARGE, DISC – clutch backing plate |
| 7 | 381489R3 | 8 | DISC, PLATE – seperator, clutch |
| 8 | 381490R4 | 8 | DISC, friction, clutch |
| 9 | 101-11175 | 1 | RING, SNAP, #175, 1.640″, Ext, RING – external retaining, No. 175, external |
| 10 | 1997941C1 | 1 | WASHER, THRUST, fiber |
| 11 | A54021 | 1 | WASHER, RACE – thrust |
| 12 | 1997479C1 | 1 | STOP, RETAINER – spring |
| 13 | 381493R1 | 1 | SPRING, clutch release |
| 14 | 238-5328 | 1 | O-RING, -328, 70 Duro, 1.85″ ID x .210″ Thk |
| 15 | 1997690C1 | 1 | PISTON, clutch |
| 16 | 381488R1 | 1 | RING, SEAL – piston, clutch |
| 17 | 130489C1 | 1 | RING, retaining, external |
| 18 | 124303A1 | 1 | HOUSING, CLUTCH, CUP – clutch |
| 19 | 381485R1 | 2 | RING, seal, cup |
| 20 | 837-12030 | 4 | DOWEL, M12 x 30 |
| 21 | 238-5012 | 1 | O-RING, -012, 70 Duro, .364″ ID x .070″ Thk |
| 22 | 1342851C1 | 1 | PLUG, sealing, 10 mm, special |
| 24 | 1997824C1 | 1 | BAFFLE, PTO |
| 25 | 100-1550 | 2 | RING, SNAP, #50, Ext, Baffle |
| 26 | 9625178 | 1 | PLUG, Hex Soc, 9/16″-18 ORB |
| 27 | 238-5018 | 3 | O-RING, -018, 70 Duro, .739″ ID x .070″ Thk |
| 28 | 238-5216 | 3 | O-RING, -216, 70 Duro, 1.109″ ID x .139″ Thk |
| 29 | 1289335C4 | 3 | PISTON, brake, anti-creep |
| 30 | 238-5138 | 1 | O-RING, -138, 90 Duro, 2.112″ ID x .103″ Thk |
| 31 | 116322A1 | 1 | RING, shaft seal |
| 32 | 1997818C1 | 1 | SHAFT, output, upper, 1000 rpm |
| 33 | A31234 | 1 | RING, retaining, internal |
| 34 | 92588C2 | 1 | BEARING, ROLLER, 1000 rpm shaft |
| 35 | 125115A1 | 1 | SPACER, bearing, output shaft |
| 36 | 1997820C1 | 1 | SNAP RING, retaining, external |
| 37 | 1997826C1 | 1 | GASKET, cover to housing |
| 38 | 1997817C1 | 1 | COVER, housing, PTO |
| 39 | 615-12035 | 1 | BOLT, Hex, M12 x 35, 8.8, Full Thd |
| 40 | 814-12090 | 1 | BOLT, Hex, M12 x 90, 8.8 |
| 41 | 1997940C1 | 2 | WASHER, THRUST |
| 42 | F7356 | 2 | BEARING, NEEDLE, needle, idler gear |
| 43 | 1997822C1 | 1 | PINION, GEAR – idler |
| 44 | 1997821C1 | 1 | SHAFT, idler |
| 45 | 738-1620 | 1 | PIN, LOCK, M6 x 20, Slotted, Roll |
| 46 | 100-25150 | 1 | RING, SNAP, 1.50″, Int, #150 |
| 47 | 576539R1 | 1 | BEARING, NEEDLE, needle |
| 48 | 359894R1 | 1 | SNAP RING, retaining, external |
| 49 | 1997823C1 | 1 | PINION, GEAR – driven |
| 50 | A31234 | 1 | RING, retaining, internal |
| 51 | ST293 | 1 | BEARING ASSY, output shaft |
| 52 | 148663C1 | 1 | SHAFT, output, 540 rpm |
| 53 | 199884C1 | 2 | SEAL, shaft |
| 54 | 813-12130 | 4 | BOLT, Hex, M12 x 130, 8.8, BOLT – hex, 12 – 1.75 x 130 mm |
| 55 | 814-12080 | 4 | BOLT, Hex, M12 x 80, 8.8 |
| 56 | 896-11012 | 2 | WASHER, M13.5 x 24.5 x 3, HT |
| 57 | 238-5013 | 2 | O-RING, -013, 70 Duro, .426″ ID x .070″ Thk |
| 58 | 1997825C1 | 1 | GASKET, PTO housing to frame |
| 59 | 1997585C1 | 1 | PIPE, TUBE – PTO brake supply |
| 60 | 201-126 | 1 | CONNECTOR, HYD., 13/16″-16 ORFS x 9/16″-20 ORB, straight, 13/16-16 face seal x 9/16-18 inch |
| 61 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 63 | 1997587C1 | 1 | PIPE, TUBE – clutch, supply, 3/8 inch, prior to tractor P.I.N. JJA0064978, used with item 65 adapter |
| 64 | 107813A1 | 1 | PIPE, TUBE – lubrication, PTO |
| 67 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 68 | 223730A1 | 1 | PIPE, TUBE – clutch supply, 5/8 inch, tractor P.I.N. JJA0064978 and after, used with item 69 elbow |
| 69 | 225500A1 | 1 | FITTING, ELBOW- 90 degree, 1-14 male x 11/16-16 inch straight thread, tractor P.I.N. JJA0064978 |
| 70 | 238-6016 | 1 | O-RING, -016, 90 Duro, .614″ ID x .070″ Thk |
| 62 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 66 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 1981239C1 | 1 | SHAFT, drive, rear |
| 5 | 109651C1 | 1 | COUPLING, shaft |
| 6 | 76349 | 1 | PLUG, Hex Hd, 9/16″-18 ORB |
| 8 | 1349450C1 | 1 | CAGE, bearing |
| 9 | 863-10020 | 4 | SCREW, Hex Soc Hd, M10 x 20, 12.9, BOLT – hex socket, 10 – 1.5 x 20 mm, class 12.9 |
| 10 | 93292C1 | 1 | BEARING, CONE, tapered roller, front |
| 11 | ST991 | 1 | BEARING, CUP, tapered roller, front |
| 12 | 93294C1 | 1 | BEARING, CONE, tapered roller, rear |
| 13 | 93295C1 | 1 | BEARING SET, tapered roller, rear |
| 14 | 93264C1 | 1 | GEAR WHEEL, drive, PTO |
| 18 | 1264649C1 | 1 | SHIM, gear |
| 19 | 1259828C1 | 1 | RING, retaining, optional with 100-16131 ring below |
| 19 | 100-16131 | 1 | RING, SNAP, #131, Ext, Optional with 1259828 ring above |
| 20 | 139307C3 | 1 | CAGE, bearing |
| 21 | 613-10025 | 6 | BOLT, Hex, M10 x 25, 8.8, Full Thd, BOLT – hex, full threads, 10 – 1.5 x 25 mm |
| 22 | 496535C1 | 1 | BEARING, CONE, tapered roller, front |
| 24 | ST753B | 1 | BEARING, CONE, tapered roller, rear |
| 25 | 29214H | 2 | BEARING, CUP, tapered roller, 4-5/16 inch OD, rear |
| 31 | 41-1632 | 1 | PLUG, Cup, 2″, Stainless, cup, 2 inch diameter, replaces 70129R1 plug |
| 32 | 1277012C1 | 1 | GEAR WHEEL, driven |
| 33 | 613-10030 | 6 | BOLT, Hex, M10 x 30, 8.8, Full Thd, BOLT – hex, full threads, 10 – 1.5 x 30 mm |
| 37 | 1259698C1 | 1 | CIRCLIP, RING – retaining, external |
| 38 | 1997579C1 | 1 | HOUSING, COVER – shield, oil |
| 39 | 139329C1 | 1 | SHIELD, gear |
| 40 | 139327C1 | 4 | CLIP, retaining, cover |
| 7 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 1968161C1 | 2 | RIM, rear, steel, for 24.5-32 tire (3-3/16 inch offset), 7210 and 7220 Tractor |
| 1 | A145462 | 2 | RIM, rear, steel, for 30.5-32 tire, 7210 and 7220 Tractor |
| 1 | 102890A1 | 2 | WHEEL, rim, rear, steel, for 23.1-34 tire (4-1/8 inch offset), 7210 and 7220 Tractor |
| 2 | 1348513C1 | 16 | BOLT, BOLT – hex, 3/4 NC x 2-1/4 inch, grade 8, 7210 and 7220 Tractor |
| 3 | 496-31081 | 16 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, flat, 13/16 x 1-1/2 x 7/32 inch, hardened, 7210 and 7220 |
| 6 | A145322 | 2 | HUB, wheel, tapered, (Dimension shown on Inset A is 6-1/8 inches), 7210 Tractor |
| 7 | 1334322C1 | 2 | HUB, BUSHING – wheel, 3-1/2 inch ID (Dimension shown on Inset B is 6-1/8 inches), 7210 Tractor |
| 8 | 1533578C1 | 12 | BOLT, SPECIAL, Hex, 3/4″-10 x 4 1/2″, G5, BOLT – hex, special, 3/4 NC x 4-1/2 inch, replaces A60095 |
| 9 | 396-31081 | 12 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, 7210 Tractor |
| 10 | 1530716C1 | 2 | KEY, BUCKET TOOTHRT, axle, 5/8 x 5 inch, 7210 Tractor |
| 11 | 38-11608 | 2 | PIN, LOCK, 1/4″ x 1/2″, Slotted, 7210 Tractor |
| 15 | A145322 | 2 | HUB, wheel, tapered, 7220 Tractor |
| 16 | 1289233C1 | 2 | HUB, BUSHING – wheel, 4 inch ID, 7220 Tractor |
| 17 | 1533578C1 | 12 | BOLT, SPECIAL, Hex, 3/4″-10 x 4 1/2″, G5, BOLT – hex, special, 3/4 NC x 4-1/2 inch, hub to bushing |
| 18 | 396-31081 | 12 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, 7220 Tractor |
| 19 | A63219 | 2 | KEY, axle, 3/4 x 6 inch, 7220 Tractor |
| 20 | 38-11608 | 2 | PIN, LOCK, 1/4″ x 1/2″, Slotted, 7220 Tractor |
| 21 | A149059 | 2 | BUSHING, SPACER – dual wheel, 8 bolt, 16 inch, 7210 and 7220 Tractor |
| 22 | 1348513C1 | 16 | BOLT, BOLT – hex, 3/4 NC x 2-1/4 inch, grade 8, 7210 and 7220 Tractor |
| 23 | 496-31081 | 32 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, flat, 13/16 x 1-1/2 x 7/32 inch, hardened, 7210 and 7220 |
| 24 | 429-1012 | 16 | NUT, 3/4″-10, G8, hex, 3/4 inch NC, grade 8, 7210 and 7220 Tractor |
| 1 | 1334480C1 | 2 | RIM, (For 18.4-38 tire) |
| 1 | 1334481C1 | 2 | RIM, (For 20.8-38 tire) |
| 1 | 1334482C1 | 2 | RIM, (For 18.4-42 tire) |
| 1 | 1334483C1 | 2 | RIM, (For 20.8-42 tire) |
| 2 | A161818 | 2 | WHEEL, HUB – cast, rear |
| 5 | 1334322C1 | 2 | HUB, BUSHING – wheel, 3-1/2 inch ID, 7210 tractor only |
| 5 | 223769A1 | 2 | BUSHING, axle, rear, 102 mm (4 inch), 7220 tractor only, replaces 1289233C1 bushing |
| 6 | A57654 | 32 | CLAMP, adjusting, double ramp |
| 7 | 117-618 | 32 | BOLT, Sq Hd, 3/4″-10 x 3 1/2″, G5, BOLT – square head, 3/4 NC x 3-1/2 inch |
| 8 | A161560 | 32 | WASHER, flat, wheel |
| 9 | 129-593 | 32 | NUT, 3/4″-10, G5, Hvy |
| 10 | 1533578C1 | 12 | BOLT, SPECIAL, Hex, 3/4″-10 x 4 1/2″, G5, BOLT – hex, special, 3/4 NC x 4-1/2 inch, replaces A60095 |
| 11 | 396-31081 | 12 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN |
| 12 | 1530716C1 | 2 | KEY, BUCKET TOOTHRT, axle, 5/8 x 5 inch, 7210 tractor only |
| 12 | A63219 | 2 | KEY, axle, 3/4 x 6 inch, 7220 tractor only |
| 13 | 38-11608 | 2 | PIN, LOCK, 1/4″ x 1/2″, Slotted |
| 1 | 1334480C1 | 2 | RIM, (For 18.4-38 tire) |
| 1 | 1334481C1 | 2 | RIM, (For 20.8-38 tire) |
| 1 | 1334482C1 | 2 | RIM, (For 18.4-42 tire) |
| 1 | 1334483C1 | 2 | RIM, (for 20.8-42 tire) |
| 2 | A145464 | 2 | WHEEL, HUB – outer, rear, universal cast |
| 3 | 326-1244 | 16 | BOLT, Hex, 3/4″-10 x 2 3/4″, G8 |
| 4 | 396-31081 | 16 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN |
| 5 | 117-618 | 24 | BOLT, Sq Hd, 3/4″-10 x 3 1/2″, G5, BOLT – square head, 3/4 NC x 3-1/2 inch |
| 6 | A57654 | 24 | CLAMP, adjusting, double ramp |
| 7 | A161560 | 24 | WASHER, flat, wheel |
| 8 | 129-593 | 24 | NUT, 3/4″-10, G5, Hvy |
| 11 | 1978549C4 | 2 | RIM, (For 14.9-46 tire) |
| 11 | 1348323C1 | 2 | RIM, (For 18.9-46 tire), not in 1340516C2 |
| 12 | 1348284C2 | 2 | DISC, WHEEL, HUB – outer, rear, universal cast |
| 13 | 326-1244 | 16 | BOLT, Hex, 3/4″-10 x 2 3/4″, G8 |
| 14 | 396-31081 | 16 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, Wheel to hub |
| 15 | 396-31081 | 24 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, Rim to wheel |
| 16 | 1348513C1 | 24 | BOLT, BOLT – hex, 3/4 NC x 2-1/4 inch, grade 8 |
| 21 | A145322 | 2 | HUB, wheel, tapered, inner, 7210 Tractor |
| 22 | 1334322C1 | 2 | HUB, BUSHING – wheel, 3-1/2 inch ID, 7210 Tractor |
| 23 | 1533578C1 | 12 | BOLT, SPECIAL, Hex, 3/4″-10 x 4 1/2″, G5, BOLT – hex, special, 3/4 NC x 4-1/2 inch, replaces A60095 |
| 24 | 496-31081 | 12 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, flat, 13/16 x 1-1/2 x 7/32 inch, hardened, 7210 Tractor |
| 25 | 1530716C1 | 2 | KEY, BUCKET TOOTHRT, axle, 5/8 x 5 inch (replaces A348906 inch key), 7210 Tractor |
| 26 | 38-11608 | 2 | PIN, LOCK, 1/4″ x 1/2″, Slotted, 7210 Tractor |
| 30 | A145322 | 2 | HUB, wheel, tapered, inner, 7220 Tractor |
| 31 | 1289233C1 | 2 | HUB, BUSHING – wheel, 4 inch ID, 7220 Tractor |
| 32 | 1533578C1 | 12 | BOLT, SPECIAL, Hex, 3/4″-10 x 4 1/2″, G5, BOLT – hex, special, 3/4 NC x 4-1/2 inch, hub to bushing |
| 33 | 396-31081 | 12 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, 7220 Tractor |
| 34 | A63219 | 2 | KEY, axle, 3/4 x 6 inch, 7220 Tractor |
| 35 | 38-11608 | 2 | PIN, LOCK, 1/4″ x 1/2″, Slotted, 7220 Tractor |
| 1 | 1334330C1 | 2 | WHEEL, rim, rear, steel (For 18.4-38 tire) |
| 1 | 1334331C1 | 2 | RIM, rear, steel (For 20.8-38 tire) |
| 1 | 1334332C1 | 2 | RIM, rear, steel (For 18.4-42 tire) |
| 1 | 123408A2 | 2 | RIM, rear, steel (For 14.9 – 46 tire) |
| 1 | 1348319C1 | 2 | WHEEL ASSY., rim, rear, steel (For 18.4-46 tire) |
| 2 | 1968133C1 | 1 | BUSHING, wheel, two piece, plain half, 3-1/2 inch ID, if used, 7210 Tractor |
| 3 | 1968132C1 | 1 | BUSHING, wheel, two piece, keyed half, 3-1/2 inch ID, if used, 7210 Tractor |
| 4 | 1334322C1 | 1 | HUB, BUSHING – wheel, 3-1/2 inch ID, one piece, if used, 7210 Tractor |
| 2 | 1334526C2 | 1 | BUSHING, wheel, two piece, plain half, 4 inch ID, if used, 7220 Tractor |
| 3 | 1334525C2 | 1 | BUSHING, wheel, two piece, keyed half, 4 inch ID, if used, 7220 Tractor |
| 4 | 1289233C1 | 1 | HUB, BUSHING – wheel, 4 inch ID, one piece, if used, 7220 Tractor |
| 5 | A180916 | 1 | HUB, wheel, rear (used with two piece bushings, Ref 2 and 3), 7210 and 7220 Tractor |
| 5 | 1348204C1 | 1 | HUB, wheel, rear (used with one-piece bushing, Ref 4), no longer avail, order A145322 if an 8 bolt hub |
| 6 | 496-31094 | 10 | WASHER, 15/16″ x 1 3/4″ x .219″, HDN, flat, 15/16 x 1-3/4 x 7/32 inch, hardened, 7210 and 7220 |
| 7 | 426-1432 | 10 | BOLT, Hex, 7/8″-9 x 2″, G8, BOLT – hex, 7/8 NC x 2 inch, grade 8, 7210 and 7220 Tractor |
| 8 | 1533578C1 | 6 | BOLT, SPECIAL, Hex, 3/4″-10 x 4 1/2″, G5, BOLT – hex, special, 3/4 NC x 4-1/2 inch, replaces A60095 |
| 9 | 396-31081 | 6 | WASHER, 13/16″ x 1 1/2″ x .219″, HDN, 7210 and 7220 Tractor |
| 10 | 1530716C1 | 1 | KEY, BUCKET TOOTHRT, axle, 5/8 x 5 inch, 7210 tractor only, 7210 and 7220 Tractor |
| 10 | A63219 | 1 | KEY, axle, 3/4 x 6 inch, 7220 tractor only, 7210 and 7220 Tractor |
| 11 | 38-11608 | 2 | PIN, LOCK, 1/4″ x 1/2″, Slotted, 7210 and 7220 Tractor |
| 20 | 1342141C1 | 2 | SPACER, dual wheel, 13 inch, 7220 Tractor |
| 21 | 426-1440 | 20 | BOLT, Hex, 7/8″-9 x 2 1/2″, G8, BOLT – hex, 7/8 NC x 2-1/2 inch, grade 8, 7220 Tractor |
| 22 | 496-31094 | 20 | WASHER, 15/16″ x 1 3/4″ x .219″, HDN, flat, 15/16 x 1-3/4 x 7/32 inch, hardened, 7220 Tractor |
| 25 | 1342168C1 | 2 | HUB, SPACER – dual wheel, 5 inch, 7210 and 7220 Tractor |
| 26 | 426-1440 | 20 | BOLT, Hex, 7/8″-9 x 2 1/2″, G8, BOLT – hex, 7/8 NC x 2-1/2 inch, grade 8, 7210 and 7220 Tractor |
| 27 | 496-31094 | 20 | WASHER, 15/16″ x 1 3/4″ x .219″, HDN, flat, 15/16 x 1-3/4 x 7/32 inch, hardened, 7210 and 7220 |
| 1 | A33178 | 2 | WEIGHT, wheel, rear, order from Machinery Price List, hardware kits |
| 2 | 433-10112 | 8 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 7″, G5, BOLT – carriage, 5/8 NC x 7 inch, hardware kits |
| 3 | 495-21069 | 8 | WASHER, 5/8″, flat, 11/16 x 1-3/4 x 9/64 inch, hardware kits |
| 4 | 892-11016 | 8 | WASHER, LOCK, M16, Hardware kits |
| 5 | 425-1010 | 8 | NUT, 5/8″-11, G5, Hardware kits |
| 16 | 117-511 | 8 | BOLT, Sq Hd, 5/8″-11 x 5″, G5, BOLT – square head, 5/8 NC x 6-1/4 inch, hardware kits |
| 17 | 495-21069 | 8 | WASHER, 5/8″, flat, 11/16 x 1-3/4 x 9/64 inch, hardware kits |
| 18 | 892-11016 | 8 | WASHER, LOCK, M16, Hardware kits |
| 19 | 425-1010 | 8 | NUT, 5/8″-11, G5, Hardware kits |
| 26 | 433-1064 | 8 | BOLT, CARRIAGE, Short NK, 5/8″-11 x 4″, G5, BOLT – carriage, 5/8 NC x 4 inch, hardware kits |
| 27 | 495-21069 | 8 | WASHER, 5/8″, flat, 11/16 x 1-3/4 x 9/64 inch, hardware kits |
| 28 | 892-11016 | 8 | WASHER, LOCK, M16, Hardware kits |
| 29 | 425-1010 | 8 | NUT, 5/8″-11, G5, Hardware kits |
| 1 | 1340257C2 | 1 | PEDAL, brake, left |
| 3 | 120451C1 | 1 | PLATE, lock, pedal |
| 5 | 38-21616 | 1 | PIN, 1/4″ x 1″, Coiled, 1/4″ x 1″, Coiled, replaces 20895R1 pin |
| 8 | 1340258C2 | 1 | PEDAL, brake, right |
| 10 | 120175C1 | 2 | HOUSING, ASSEMBLY – pedal, brake |
| 11 | 120171C1 | 1 | BUSHING, pivot, housing |
| 12 | 413-538 | 3 | BOLT, Hex, 5/16″-18 x 2 3/8″, G5, BOLT – hex, 5/16 NC x 2-3/8 inch |
| 13 | 231-5145 | 3 | NUT, Flg, USR, 5/16″-18 |
| 14 | 413-612 | 4 | BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd, hex, 3/8 NC x 3/4 inch |
| 15 | 413-512 | 2 | BOLT, Hex, 5/16″-18 x 3/4″, G5, Full Thd, hex, 5/16 NC x 3/4 inch |
| 16 | 495-81120 | 2 | WASHER, .344″ x 1 1/4″ x .120″, flat, 11/32 x 1-1/4 x 7/64 inch |
| 19 | 103956C4 | 2 | LEVER, pedal and valve |
| 20 | 104783C1 | 2 | SPRING, return, pedal |
| 21 | 384082R1 | 2 | LINK, operating, brake |
| 22 | 427-8168 | 2 | PIN, CLEVIS, 1/2″ x 1 11/16′”, Hardened |
| 23 | 495-11053 | 4 | WASHER, 1/2″, SAE, (17/32″ x 1-1/16″ x 3/32″) |
| 24 | 432-816 | 4 | PIN, SPLIT (COTTER), 1/8″ x 1″ |
| 25 | 384083R2 | 2 | CLEVIS, YOKE – brake |
| 29 | 413-518 | 2 | BOLT, Hex, 5/16″-18 x 1 1/8″, G5, Full Thd, BOLT – hex, 5/16 NC x 1-1/8 inch |
| 30 | 492-11031 | 2 | WASHER, LOCK, 5/16″ |
| 31 | 1272218C1 | 1 | VALVE, ASSEMBLY – brake, parts list fig. 7-8 |
| 32 | 413-656 | 2 | BOLT, Hex, 3/8″-16 x 3 1/2″, G5, hex, 3/8 NC x 3-1/2 inch |
| 33 | 495-11041 | 2 | WASHER, 3/8″, SAE, Flat, (13/32 x 13/16 x 1/16″) |
| 34 | 492-11038 | 2 | WASHER, LOCK, 3/8″ |
| 35 | 425-166 | 2 | NUT, 3/8″-16, G5, Hvy, heavy hex, 3/8 inch NC |
| 36 | 201-304 | 2 | ELBOW, 90є, 11/16″-16 x 9/16″-18 Adj, ORFS, 90 degree, 11/16-16 face seal x 9/16-18 inch adj |
| 38 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 39 | 92967C1 | 1 | POPPET, VALVE, VALVE ASSEMBLY – check, brake |
| 41 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 42 | 201-101 | 1 | CONNECTOR, HYD., 11/16″-16 ORFS x 9/16″-18 ORB, ADAPTER – straight, 11/16-16 face seal x |
| 44 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 48 | 1340543C1 | 1 | TUBE ASSY., supply, valve |
| 50 | 238-6012 | 3 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 52 | 1334376C2 | 3 | HOSE ASSY., 584 mm (23 inch) long, supply, brake |
| 53 | 1334579C3 | 3 | PIPE, SLEEVE – corrugated, 610 mm (24-1/64 inch) long, cut from 1978484C2 bulk sleeve |
| 54 | 1289242C1 | 1 | TUBE, return, brake |
| 55 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 56 | 1334377C2 | 1 | HOSE ASSY., 914 mm (36 inch) long, return |
| 57 | 1968083C3 | 1 | HOSE, PROTECTION, SLEEVE – corrugated, 940 mm (37 inch) long, cut from 1978484C2 bulk sleeve |
| 59 | 1340545C1 | 1 | TUBE ASSY., brake, left, includes item 50 O-ring |
| 60 | 1340544C1 | 1 | TUBE ASSY., brake, right, includes item 50 O-ring |
| 61 | 1334459C1 | 1 | CLAMP, support, tube mouting |
| 62 | 614-8016 | 2 | BOLT, Hex, M8 x 16, 8.8 |
| 63 | 825-1408 | 2 | NUT, M8, Cl 8 |
| 64 | 1968088C1 | 1 | BRACKET, mounting, cable |
| 65 | 614-10020 | 1 | BOLT, Hex, M10 x 20, 8.8, Full Thd |
| 69 | 1334460C1 | 1 | BRACKET, support, tube |
| 37 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 40 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 43 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 1342723C2 | 2 | COVER, brake |
| 2 | 814-16110 | 6 | BOLT, Hex, M16 x 110, 8.8, (Right cover) |
| 2 | 814-16100 | 6 | BOLT, Hex, M16 x 100, 8.8, (Left cover) |
| 8 | 1997422C1 | 2 | PISTON, lock, brake |
| 10 | 120486C1 | 8 | PLATE, BRAKE, separator |
| 11 | 120488C2 | 8 | PLATE, BRAKE, friction |
| 12 | 139189C1 | 2 | PLATE, return, adjuster |
| 19 | 37-1828 | 1 | DOWEL, 1/2″ x 1 3/4″, PIN – brake adjuster |
| 20 | 100-1450 | 2 | RING, SNAP, #50, Ext |
| 21 | 1342928C1 | 12 | WASHER, thrust |
| 25 | 120514C2 | 4 | TUBE, inlet, brake oil |
| 26 | 238-5013 | 8 | O-RING, -013, 70 Duro, .426″ ID x .070″ Thk |
| 2 | 384495R1 | 1 | CAP, body |
| 3 | 413-414 | 6 | BOLT, Hex, 1/4″-20 x 7/8″, G5, Full Thd, hex, 1/4 NC x 7/8 inch |
| 5 | 1263125C1 | 2 | SPRING |
| 6 | 1263124C1 | 2 | SPRING, piston, large |
| 9 | 231-4618 | 2 | NUT, LOCK, 1/2″-20, GB, hex, self-locking, 1/2 inch NF |
| 10 | 69158C1 | 2 | RETAINER, piston |
| 11 | A27020 | 2 | RING, retaining |
| 12 | 140720C1 | 1 | PLATE, orifice |
| 18 | 384503R2 | 1 | GASKET, body |
| 21 | 76349 | 1 | PLUG, Hex Hd, 9/16″-18 ORB |
| 24 | 238-5135 | 2 | O-RING, -135, 70 Duro, 1.925″ ID x .103″ Thk, 2-1/16 ID x 3/32 inch wide |
| 22 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 1533774C2 | 1 | VALVE, HYDRAULIC, ASSEMBLY – priority, trailer brake, replaces 1346284C1 valve |
| 2 | 614-8016 | 2 | BOLT, Hex, M8 x 16, 8.8 |
| 3 | 1343653C2 | 1 | VALVE, trailer brake |
| 4 | 1975204C1 | 2 | FITTING, special tee |
| 5 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 6 | 238-6014 | 2 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 7 | 1955121C1 | 1 | HOSE ASSY., 1346 mm (53 inch) long, trailer brake, left |
| 8 | 1955122C2 | 1 | HOSE, 737 mm (29-1/64 inch) long, trailer brake, right |
| 9 | 1975213C2 | 1 | ADAPTER, trailer brake coupler |
| 10 | 1328179C1 | 1 | O-RING, 15.4 ID x 2.1 mm |
| 11 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 12 | 103774A2 | 1 | HOSE, 1156 mm (45-1/2 inch) long, coupler |
| 13 | 1975266C1 | 1 | CONNECTOR, HYD., TUBE – coupler adapter |
| 13 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 14 | 3131463R91 | 1 | BREAKER POINTS, trailer brake |
| 15 | 1975290C1 | 2 | ELBOW, TUBE – brake supply |
| 16 | 895-11008 | 2 | WASHER, M8 x 16 x 1.6 |
| 17 | 1975206C1 | 1 | FITTING, adapter return |
| 18 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 19 | 825-1424 | 1 | NUT, M24, Cl 8, hex, 24 mm – 3 |
| 20 | 1955123C1 | 1 | HOSE ASSY., 419 mm (16-1/2 inch) long, priority pilot inlet |
| 21 | 1955126C2 | 1 | HOSE, 641 mm (25-1/4 inch) long, steering pilot |
| 22 | 1955134C2 | 1 | HOSE ASSY., 1588 mm (62-1/2 inch) long, steering supply |
| 23 | 1955135C1 | 1 | HOSE ASSY., 953 mm (37-1/2 inch) long, priority valve supply |
| 24 | 201-304 | 1 | ELBOW, 90є, 11/16″-16 x 9/16″-18 Adj, ORFS, 90 degree, 11/16-16 face seal x 9/16-18 inch adj |
| 26 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 27 | 201-101 | 4 | CONNECTOR, HYD., 11/16″-16 ORFS x 9/16″-18 ORB, ADAPTER – straight, 11/16-16 face seal x |
| 29 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 30 | 201-102 | 3 | CONNECTOR, HYD., 13/16″-16 ORFS x 3/4″-16 ORB |
| 31 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 32 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 33 | 201-321 | 1 | ELBOW, 45є, 13/16″-16 x 9/16″-18. Adj, ORFS, 45 degree, 13/16-16 face seal x 9/16-18 inch adj |
| 35 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 36 | 201-416 | 1 | TEE, 13/16″-16 ORFS x 13/16″-16 Sw Run, 13/16-16 inch face branch x face x swivel face, if used |
| 37 | 238-6014 | 3 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 38 | 1978404C1 | 1 | HOSE ASSY., crossover, 787 mm (31 inch) long, marker return, if used 31″ overall length – 100R17 – |
| 41 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 45 | 103118A1 | 1 | SUPPORT ASSY., trailer brake |
| 55 | 1955283C2 | 1 | SUPPORT ASSY., BRACKET – cable and valve mounting |
| 56 | 614-8020 | 1 | BOLT, Hex, M8 x 20, 8.8 |
| 57 | 614-8025 | 3 | BOLT, Hex, M8 x 25, 8.8 |
| 58 | 1955333C1 | 1 | TUBE ASSY., trailer brake valve return |
| 59 | 102562A1 | 1 | PIPE, TUBE – trailer brake pilot |
| 60 | 102563A1 | 2 | PIPE, TUBE – trailer brake priority |
| 64 | 3072723R1 | 1 | SPACER, clamp |
| 65 | 535307R1 | 2 | CLAMP, tube |
| 66 | 614-6025 | 1 | BOLT, Hex, M6 x 25, 8.8, BOLT – hex, full threads, 6 – 1.0 x 25 mm |
| 67 | 832-41306 | 1 | NUT, LOCK, M6 x 1, Cl 10 |
| 70 | 1348300C1 | 1 | TUBE, steering supply |
| 71 | 238-6014 | 2 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 72 | 895-10006 | 1 | WASHER, M6 x 12 x 1.6, flat, 6.6 x 12 x 1.6 mm |
| 73 | 201-402 | 1 | TEE, 13/16″-18 x 3/4″-16 Br, ORFS, 3/4-16 adj O-ring branch x 13/16-16 inch face x face |
| 74 | 237-6008 | 3 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 75 | 1348540C1 | 1 | VALVE, CHECK, check |
| 76 | 106510A1 | 1 | PIPE, TUBE – trailer brake pressure, used with item 77 elbow, replaces one-piece 102564A1 tube with |
| 77 | 201-320 | 1 | ELBOW, 90є, 13/16″-16 x 13/16″-16 Fem Sw ORFS, ELBOW – 90 degree, 13/16-16 inch face seal x |
| 78 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 79 | 201-126 | 1 | CONNECTOR, HYD., 13/16″-16 ORFS x 9/16″-20 ORB, straight, 13/16-16 face seal x 9/16-18 inch |
| 80 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 82 | 1342026C2 | 1 | PIPE, SLEEVE – corrugated, bulk, 32 (1-1/4) x 37 (1-7/16) x 565 mm (22-1/4 inch) long, steering |
| 83 | 201-304 | 1 | ELBOW, 90є, 11/16″-16 x 9/16″-18 Adj, ORFS, 90 degree, 11/16-16 face seal x 9/16-18 inch adj |
| 85 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 86 | 1976746C1 | 1 | HOSE, 533 mm (21 inch) long, crossover, marker return, if used |
| 87 | 195383A1 | 1 | PLATE, LARGE, COVER – brake housing |
| 88 | 614-8020 | 1 | BOLT, Hex, M8 x 20, 8.8 |
| 89 | 614-8025 | 3 | BOLT, Hex, M8 x 25, 8.8 |
| 25 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 28 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 34 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 40 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 81 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 84 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 1342139C1 | 1 | BASE, PLATE – dual pump |
| 2 | 139241C3 | 1 | GASKET, base, dual pump |
| 3 | 628-10035 | 4 | BOLT, Hex, M10 x 35, 10.9, Full Thd, Dual pump screen base |
| 5 | 76349 | 2 | PLUG, Hex Hd, 9/16″-18 ORB |
| 7 | 1976758C1 | 1 | MOUNTING CLIP, RETAINER – suction tube |
| 8 | 238-5228 | 1 | O-RING, -228, 70 Duro, 2.234″ ID x .139″ Thk |
| 8 | 238-5235 | 1 | O-RING, -235, 70 Duro, 3.109″ ID x .139″ Thk |
| 9 | 613-10025 | 2 | BOLT, Hex, M10 x 25, 8.8, Full Thd, BOLT – hex, full threads, 10 – 1.5 x 25 mm |
| 10 | 896-16010 | 2 | WASHER, M10 x 24.5 x 3, HT, flat, 11 x 24 x 3 mm, hardened |
| 11 | 1348335C1 | 1 | SCREEN, pump inlet |
| 13 | 1348337C1 | 1 | SHROUD, COVER – suction screen |
| 14 | 1342641C1 | 1 | GASKET, cover |
| 16 | 1971728C1 | 1 | FILTER, ELEMENT |
| 17 | 1957801C1 | 1 | SWITCH, PRESSURE, pressure |
| 18 | 238-5011 | 1 | O-RING, -011, 70 Duro, .301″ ID x .070″ Thk |
| 19 | 238-5008 | 1 | O-RING, -008, 70 Duro, .176″ ID x .070″ Thk |
| 24 | A176566 | 1 | TRANSMITTER, SENDER – temperature, coolant |
| 25 | 193-1000 | 1 | NUT, Keps, w/LW,#10-32, hex, with external tooth lock washer, No. 10 NF |
| 28 | 1342123C2 | 1 | HOSE, return, 967 mm (38-1/8 inch) long, steering |
| 29 | 201-104 | 1 | CONNECTOR, HYD., 1 3/16″-12 ORFS x 1 1/16″-12 ORB |
| 30 | 237-6012 | 1 | O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk |
| 31 | 238-6018 | 1 | O-RING, -018, 90 Duro, .739″ ID x .070″ Thk |
| 32 | 1348339C1 | 1 | HOSE ASSY., cooler return, 3226 mm (127 inch) long, prior to tractor P.I.N. JJA0064978 |
| 32 | 225399A2 | 1 | HOSE, 3632 mm (143 inch) long, cooler return, tractor P.I.N. JJA0064978 |
| 33 | 201-104 | 1 | CONNECTOR, HYD., 1 3/16″-12 ORFS x 1 1/16″-12 ORB |
| 34 | 237-6012 | 1 | O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk |
| 35 | 238-6018 | 1 | O-RING, -018, 90 Duro, .739″ ID x .070″ Thk |
| 36 | 1348346C1 | 1 | HOSE ASSY., 595 mm (23-7/16 inch) long, pump to filter |
| 37 | 167268 | 1 | O-RING, 16-1, 90 Duro, 1.171″ ID x .116″ Thk |
| 43 | 1971848C2 | 1 | UNION, VALVE ASSEMBLY – check, return hose |
| 44 | 237-6016 | 1 | O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk |
| 45 | 238-6021 | 1 | O-RING, -021, 90 Duro, .926″ ID x .070″ Thk |
| 46 | 109893A1 | 1 | HOSE, 737 mm (29 inch) long, auxiliary return |
| 49 | 237-6016 | 1 | O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk |
| 51 | 201-405 | 1 | TEE, 2″-12 x 1 7/8″-12 Br, ORFS, 1-7/8-12 adj O-ring branch x 2-12 inch face x face |
| 52 | 237-6024 | 1 | O-RING, 24-1, 90 Duro, 1.72″ ID x .118″ Thk |
| 53 | 238-6025 | 1 | O-RING, -025, 90 Duro, 1.176″ ID x .070″ Thk |
| 58 | 201-353 | 1 | ELBOW, 90є, 2″-12 Adj x 2″-12 Fem Sw, ORFS, 90 deg, 2-12 swivel face x 1-7/8-12 inch adj O-ring |
| 61 | 1348257C1 | 1 | PIPE, TUBE – lube manifold |
| 6 | 237-6006 | 2 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 2 | 1340537C1 | 1 | SUPPORT, BRACKET – auxiliary filter |
| 3 | 828-10050 | 2 | BOLT, Hex, M10 x 50, 10.9, BOLT – hex, 10 – 1.5 x 50 mm, class 10.9 |
| 5 | 129-667 | 2 | NUT, #10-32, LH, Chamferred |
| 6 | 493-21020 | 1 | WASHER, LOCK, Int Tooth, #10, internal tooth, 3/16 inch |
| 8 | 238-5011 | 1 | O-RING, -011, 70 Duro, .301″ ID x .070″ Thk |
| 10 | 1346028C1 | 1 | ELEMENT, filter |
| 11 | 1986552C2 | 1 | O-RING, element |
| 15 | 413-612 | 4 | BOLT, Hex, 3/8″-16 x 3/4″, G5, Full Thd, hex, 3/8 NC x 3/4 inch |
| 16 | 1348342C3 | 1 | HOSE, 524 mm (20-5/8 inch) long, pump to auxiliary filter |
| 17 | 201-105 | 2 | CONNECTOR, HYD., 1 7/16″-12 ORFS x 1 5/16″-12 ORB, ADAPTER – straight, 1-7/16-12 face seal x |
| 18 | 237-6016 | 1 | O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk |
| 19 | 238-6021 | 1 | O-RING, -021, 90 Duro, .926″ ID x .070″ Thk |
| 20 | 201-105 | 2 | CONNECTOR, HYD., 1 7/16″-12 ORFS x 1 5/16″-12 ORB, ADAPTER – straight, 1-7/16-12 face seal x |
| 21 | 237-6016 | 1 | O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk |
| 22 | 238-6021 | 1 | O-RING, -021, 90 Duro, .926″ ID x .070″ Thk |
| 23 | 111020A1 | 1 | PIPE, TUBE – auxiliary filter to PTO valve |
| 7 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 1986567C2 | 1 | VALVE, ASSEMBLY – PTO, parts list fig. 8-10, See fig. 5-14 for adapter and cooler supply tube (items |
| 2 | 1334649C1 | 1 | BRACKET, mounting, valve |
| 3 | 814-10070 | 3 | BOLT, Hex, M10 x 70, 8.8, BOLT – hex, 10 – 1.5 x 70 mm |
| 4 | 825-1410 | 3 | NUT, M10, Cl 8 |
| 19 | 201-101 | 5 | CONNECTOR, HYD., 11/16″-16 ORFS x 9/16″-18 ORB, ADAPTER – straight, 11/16-16 face seal x |
| 21 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, Face end |
| 25 | 201-401 | 1 | TEE, 11/16″-16 x 9/16″-18 Br, ORFS, 9/16-18 adj O-ring boss branch x 11/16-16 inch face seal x face |
| 27 | 238-6012 | 2 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, Face end |
| 29 | 201-304 | 1 | ELBOW, 90є, 11/16″-16 x 9/16″-18 Adj, ORFS, 90 degree, 11/16-16 face seal x 9/16-18 inch adj |
| 31 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 40 | 1997587C1 | 1 | PIPE, TUBE – brake, PTO |
| 41 | 1997585C1 | 1 | PIPE, TUBE – clutch, PTO |
| 42 | 535307R1 | 2 | CLAMP, tube |
| 43 | 3072723R1 | 2 | SPACER, clamp |
| 44 | 614-6025 | 2 | BOLT, Hex, M6 x 25, 8.8, BOLT – hex, full threads, 6 – 1.0 x 25 mm |
| 45 | 1348381C1 | 1 | HOSE, 409 mm (16-1/8 inch) long, drain, PTO |
| 46 | 1348310C1 | 1 | TUBE, return, regulator valve |
| 48 | 895-10006 | 2 | WASHER, M6 x 12 x 1.6, flat, 6.6 x 12 x 1.6 mm |
| 55 | 1348309C1 | 1 | TUBE, differential lock |
| 20 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk, Boss end |
| 26 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk, Boss end |
| 30 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 134850A1 | 1 | VALVE, ASSEMBLY – PTO, parts list fig. 8-12, See fig. 5-16 for adapter and cooler supply tube (items |
| 2 | 226395A1 | 1 | SUPPORT, BRACKET – mounting, valve |
| 3 | 461-33844 | 2 | SCREW, Hex Soc Hd, 3/8″-16 x 2 3/4″, BOLT – hex socket, 3/8 NC x 2-3/4 inch |
| 4 | 201-132 | 1 | CONNECTOR, HYD., 1″-14 ORFS x 7/16″-20 ORB, ADAPTER – straight, 1-14 face seal x 9/16-18 inch |
| 6 | 238-6016 | 1 | O-RING, -016, 90 Duro, .614″ ID x .070″ Thk, Face end |
| 7 | 223730A1 | 1 | PIPE, TUBE – PTO, clutch supply, 5/8 inch |
| 8 | 226390A2 | 1 | CLAMP, S-type, tube |
| 9 | 225500A1 | 1 | FITTING, ELBOW – 90 degree, 1-14 male x 11/16-16 inch straight thread |
| 10 | 238-6016 | 1 | O-RING, -016, 90 Duro, .614″ ID x .070″ Thk |
| 19 | 201-101 | 2 | CONNECTOR, HYD., 11/16″-16 ORFS x 9/16″-18 ORB, ADAPTER – straight, 11/ 6-16 face seal x |
| 21 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, Face end |
| 25 | 201-401 | 1 | TEE, 11/16″-16 x 9/16″-18 Br, ORFS, 9/16-18 adj O-ring boss branch x 11/16-16 inch face seal x face |
| 27 | 238-6012 | 2 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, Face end |
| 29 | 201-304 | 1 | ELBOW, 90є, 11/16″-16 x 9/16″-18 Adj, ORFS, 90 degree, 11/16-16 face seal x 9/16-18 inch adj |
| 31 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 41 | 1997585C1 | 1 | PIPE, TUBE – brake, PTO |
| 45 | 1348381C1 | 1 | HOSE, 409 mm (16 – 1/8 inch) long, drain, PTO |
| 46 | 220888A1 | 1 | TUBE, HOSE – 10 (3/8) x 16 (5/8) x 635 mm (25 inch) long, return, regulator valve |
| 47 | 1348264C1 | 2 | CLAMP, HOSE, 3/8 inch |
| 55 | 1348309C1 | 1 | TUBE, differential lock |
| 56 | 217-312 | 2 | FITTING, 45є, 3/8″ Hose x 9/16″-12 ORB Beaded, ELBOW – 45 degree, 3/8 stem end x 9/16-18 inch |
| 5 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk, Boss end |
| 20 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk, Boss end |
| 26 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk, Boss end |
| 30 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 57 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 5 | 1341958C2 | 1 | SPOOL, POPPET – valve check |
| 7 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk |
| 8 | 238-5015 | 1 | O-RING, -015, 70 Duro, .551″ ID x .070″ Thk |
| 9 | 238-5014 | 1 | O-RING, -014, 70 Duro, .489″ ID x .070″ Thk |
| 12 | 1341960C1 | 1 | SPRING, check valve |
| 13 | 9625178 | 1 | PLUG, Hex Soc, 9/16″-18 ORB |
| 20 | 1341952C1 | 1 | SPRING, detent |
| 21 | 1341948C3 | 1 | GUIDE, detent, without balance groove |
| 22 | 211-1008 | 1 | BALL, 1/4″ Dia, chrome alloy steel, 1/4 inch, grade 24 |
| 23 | 1964698C3 | 1 | SWITCH, PTO neutral |
| 25 | 100-1862 | 1 | RING, SNAP, #62, Ext, Spool (Replaces A60273) |
| 26 | 1957864C2 | 1 | STOP, spool, shoulder |
| 27 | G108813 | 1 | BUSHING, LARGE, STOP – spool |
| 28 | G105700 | 1 | SEAL, oil |
| 30 | G108811 | 1 | WASHER, poppet |
| 31 | G108818 | 1 | SPRING, secondary, modulator |
| 32 | G108810 | 1 | WASHER, poppet, prior to transmission serial number AJB0068288 shown |
| 32 | 140211A1 | 1 | WASHER, poppet, transmission serial number AJB0068288 and after |
| 33 | G110014 | 1 | SPRING, VALVE, centering |
| 34 | 238-5024 | 1 | O-RING, -024, 70 Duro, 1.114″ ID x .070″ Thk, 1 1/8 ID x 1/16 inch wide |
| 35 | G108809 | 1 | POPPET, VALVE |
| 39 | G108808 | 1 | CAP, end |
| 40 | G108816 | 1 | SPRING, primary, modulator |
| 41 | 100-21137 | 1 | RING, SNAP, 1.375″, Int, #137 |
| 42 | 71100209 | 1 | PLUG, Hex Soc, 3/4″-16 ORB |
| 43 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 44 | 1986880C1 | 1 | SPOOL, regulator |
| 46 | 1341961C2 | 1 | SPRING, regulator |
| 47 | 237-6012 | 1 | O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk |
| 48 | 218-1280 | 1 | NUT, LOCK, Blkhd, 1 1/16″-12 |
| 49 | 1341962C1 | 1 | PLUG, adjusting |
| 50 | 879-10625 | 2 | SET SCREW, Hex Soc, M6 x 20, Cup Pt, set, hex socket, 6 x 25 mm |
| 14 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 2 | 9625178 | 1 | PLUG, Hex Soc, 9/16″-18 ORB |
| 5 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 6 | 238-5014 | 1 | O-RING, -014, 70 Duro, .489″ ID x .070″ Thk |
| 7 | 238-5013 | 1 | O-RING, -013, 70 Duro, .426″ ID x .070″ Thk |
| 8 | 71100209 | 2 | PLUG, Hex Soc, 3/4″-16 ORB |
| 9 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 10 | 144487A1 | 1 | SPRING, brake |
| 11 | 143740A1 | 1 | SPOOL, PTO brake |
| 12 | 143739A1 | 1 | SPOOL, PTO modulator |
| 13 | 144486A1 | 1 | SPRING, reducing |
| 14 | 139402A1 | 1 | PIN, LARGE, retaining |
| 15 | 187224A1 | 1 | PISTON, modulator |
| 16 | 139404A1 | 1 | SPRING, outer, modulator |
| 17 | 139405A1 | 1 | SPRING, inner, modulator |
| 18 | 9841223 | 1 | PLUG, Hex Soc, 1 1/16″-12 ORB |
| 19 | 237-6012 | 1 | O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk |
| 20 | 1986880C1 | 1 | SPOOL, regulator |
| 21 | 1341961C2 | 1 | SPRING, regulator |
| 22 | 1341962C1 | 1 | PLUG, adjusting |
| 23 | 237-6012 | 1 | O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk |
| 24 | 218-1280 | 1 | NUT, LOCK, Blkhd, 1 1/16″-12 |
| 3 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 1 | 1272538C1 | 1 | VALVE, ASSEMBLY – solenoid, no longer available, on transmissions prior to serial number |
| 1 | 320691A1 | 1 | VALVE, ASSEMBLY – solenoid, transmissions serial number AJB0099462 and after, parts list fig.8-16 |
| 2 | 814-6035 | 2 | BOLT, Hex, M6 x 35, 8.8, If equipped |
| 3 | 1289347C1 | 1 | BRACKET, mounting, solenoid valve, if equipped |
| 4 | 201-101 | 1 | CONNECTOR, HYD., 11/16″-16 ORFS x 9/16″-18 ORB, ADAPTER – straight, 11/16-16 face seal x |
| 6 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 9 | 201-304 | 1 | ELBOW, 90є, 11/16″-16 x 9/16″-18 Adj, ORFS, 90 degree, 11/16-16 face seal x 9/16-18 inch adj |
| 11 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 12 | 201-315 | 1 | ELBOW, 45є, 11/16″-16 x 9/16″-18. Adj, ORFS, 45 degree, 11/16-16 face seal x 9/16-18 inch adj |
| 14 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 18 | 1289343C1 | 1 | TUBE, supply, valve (with hitch) |
| 19 | 1978464C1 | 1 | TUBE, supply (without hitch) |
| 20 | 131135A1 | 1 | PIPE, PRESSURE, TUBE |
| 21 | 1348291C1 | 1 | PIPE, RETURN, TUBE – valve return |
| 22 | 201-101 | 2 | CONNECTOR, HYD., 11/16″-16 ORFS x 9/16″-18 ORB, ADAPTER – straight, 11/16-16 face seal x |
| 24 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 25 | 201-102 | 1 | CONNECTOR, HYD., 13/16″-16 ORFS x 3/4″-16 ORB |
| 26 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 27 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 5 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 10 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 13 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 23 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 10 | 193-1002 | 4 | NUT, Keps, w/LW,#8-32, hex, with external tooth lock washer, No. 8 NC |
| 21 | 614-6050 | 2 | BOLT, Hex, M6 x 50, 8.8, Full Thd, BOLT – hex, full threads, 6 – 1.0 x 50 mm |
| 2 | 144169C2 | 1 | GASKET, pump |
| 3 | 615-12035 | 2 | BOLT, Hex, M12 x 35, 8.8, Full Thd |
| 4 | 896-16012 | 2 | WASHER, M12 x 28.5 x 4, HT, flat, 13.5 x 28 x 4 mm, hardened |
| 8 | 1334586C1 | 1 | PLUG, ADAPTER – coupler drain |
| 9 | 1546463C1 | 1 | PRESSURE SWITCH, flow compensated (PFC) |
| 12 | 201-308 | 1 | ELBOW, 90є, 1 7/16″-12 x 1 5/8″-12, Adj, ORFS, 90 deg, 1-7/16-12 face x 1-5/16-12 inch adj O-ring |
| 13 | 237-6016 | 1 | O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk, Boss end |
| 14 | 238-6021 | 1 | O-RING, -021, 90 Duro, .926″ ID x .070″ Thk, Face End |
| 18 | 1342131C1 | 1 | TUBE ASSY., supply, priority valve |
| 19 | 1342146C2 | 1 | PIPE, TUBE – signal, pump (with hitch) |
| 20 | 1957867C1 | 1 | SCREEN, FILTER, ASSEMBLY – pump, compensator |
| 21 | 237-6004 | 1 | O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk, Boss end |
| 22 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, Face end |
| 23 | 1342147C2 | 1 | PIPE, TUBE – signal, pump (without hitch) |
| 24 | 1334401C1 | 1 | SUPPORT, BRACKET – clamp, no longer available, order 231089A1 bracket and 3072723R1 spacer |
| 25 | 535307R1 | 1 | CLAMP, tube |
| 26 | 614-6025 | 1 | BOLT, Hex, M6 x 25, 8.8, BOLT – hex, full threads, 6 – 1.0 x 25 mm |
| 30 | 1349060C1 | 1 | GASKET, pump, dual gear, used with 115214A1 pump |
| 31 | 615-12035 | 2 | BOLT, Hex, M12 x 35, 8.8, Full Thd |
| 32 | 896-16012 | 2 | WASHER, M12 x 28.5 x 4, HT, flat, 13.5 x 28 x 4 mm, hardened |
| 36 | 1348346C1 | 1 | HOSE ASSY., 595 mm (23-7/16 inch) long, pump to filter |
| 50 | 1340541C1 | 1 | TUBE, inlet, dual pump |
| 51 | 238-5225 | 4 | O-RING, -225, 70 Duro, 1.859″ ID x .139″ Thk |
| 52 | 300525R1 | 2 | CLAMP, split flange halves |
| 53 | 413-820 | 4 | BOLT, Hex, 1/2″-13 x 1 1/4″, G5, Full Thd, hex, 1/2 NC x 1-1/4 inch |
| 54 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk |
| 55 | 238-5228 | 1 | O-RING, -228, 70 Duro, 2.234″ ID x .139″ Thk |
| 56 | 115214A1 | 1 | PUMP, HYDRAULIC, ASSEMBLY – dual gear, prior to transmission serial number AJB0082218 |
| 60 | 1986872C1 | 1 | VALVE, PRESSURE RELIEF, ASSEMBLY – relief, for 115214A1 pump, if used |
| 61 | 238-7113 | 1 | O-RING, -113, Cl 7, .549″ ID x .103″ Thk |
| 62 | 238-6117 | 1 | O-RING, -117, 90 Duro, .799″ ID x .103″ Thk |
| 63 | N7319 | 1 | RING, WASHER – backup |
| 64 | 245847A1 | 1 | PACKAGE, VALVE ASSEMBLY – relief, front, for 227748A3 pump, if used, components not serviced |
| 65 | 231061A1 | 1 | VALVE, PRESSURE RELIEF, ASSEMBLY – rear, for 227748A3 pump, if used, components not |
| 66 | 201-105 | 1 | CONNECTOR, HYD., 1 7/16″-12 ORFS x 1 5/16″-12 ORB, ADAPTER – straight, 1-7/16-12 face seal x |
| 67 | 238-6021 | 1 | O-RING, -021, 90 Duro, .926″ ID x .070″ Thk |
| 68 | 237-6016 | 1 | O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk |
| 69 | 895-10006 | 1 | WASHER, M6 x 12 x 1.6, flat, 6.6 x 12 x 1.6 mm |
| 70 | 231089A1 | 1 | SUPPORT, BRACKET – clamp |
| 71 | 3072723R1 | 1 | SPACER, bracket |
| 1 | A47278 | 1 | HOUSING, piston pump |
| 2 | A47281 | 1 | SPRING, yoke, replaces 1263237C1 spring |
| 3 | A47282 | 1 | PLUG, SEAT – spring |
| 8 | A47286 | 2 | SPACER, SPACER – bearing |
| 9 | 238-6137 | 2 | O-RING, -137, 90 Duro, 2.05″ ID x .103″ Thk, Cover, included in 1263244C2 seal kit on fig. 8-24 |
| 10 | A47288 | 2 | COVER, housing |
| 11 | 121-3 | 8 | BOLT, Hex Flg, 1/4″-20 x 1/2″, Serr |
| 12 | A47301 | 2 | PIN, locating |
| 18 | 1263234C1 | 1 | SHAFT, drive pump |
| 19 | A47284 | 1 | YOKE, pump shaft |
| 20 | A47283 | 1 | SEAT, piston, pump |
| 21 | 38-11208 | 1 | PIN, LOCK, 3/16″ x 1/2″, Slotted |
| 22 | 380-2624 | 6 | SCREW, 12 Pt Flg, 3/8″-16 x 1 1/2″, BOLT – 12 point flange, chemical locking, 3/8 NC x 1-1/2 inch |
| 24 | A47292 | 1 | PLATE, shoe |
| 25 | A47293 | 1 | WASHER, spherical |
| 29 | A47296 | 3 | PIN, block |
| 30 | A47297 | 1 | RETAINER, pin |
| 32 | A47299 | 1 | WASHER, spring |
| 33 | A47298 | 1 | SPRING, block |
| 34 | A47300 | 1 | WASHER, SPRING |
| 35 | 100-21162 | 1 | RING, SNAP, 1.625″, Int, #162 |
| 36 | 1263236C1 | 1 | PLATE, wafer |
| 38 | A47280 | 1 | GASKET, housing, included in 1263244C2 seal kit on fig. 8-24 |
| 39 | A47309 | 1 | PIN, headless, 1/4 x 1/2 inch |
| 42 | A47340 | 1 | RING, retaining |
| 43 | 238-8112 | 1 | O-RING, -112, Cl 8, .487″ ID x .103″ Thk, Rod, piston, included in 1263244C2 seal kit on Figure 8-24 |
| 44 | 1971490C1 | 1 | COVER, BLOCK – valve |
| 45 | A47309 | 1 | PIN, headless, 1/4 x 1/2 inch |
| 46 | A47308 | 1 | SPRING, SPRING – block, valve |
| 47 | A47307 | 1 | VALVE, check |
| 48 | A47306 | 1 | PLUG, SEAT – valve, block |
| 49 | 86512512 | 2 | PLUG, Hex Hd, 7/8″-14 ORB |
| 50 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk |
| 51 | A49832 | 1 | VALVE, BODY – compensator |
| 52 | A47316 | 1 | SPOOL, pressure, limiter, no longer available, order 1976861C1 compensator assembly |
| 53 | A47317 | 1 | PLUG, SEAT – spool |
| 54 | A47318 | 1 | SPRING, spool |
| 55 | 238-8015 | 1 | O-RING, -015, Cl 8, .551″ ID x .070″ Thk |
| 56 | A47320 | 1 | PLUG, adjusting |
| 57 | A47321 | 1 | SPOOL, sensing, load, no longer available, order 1976861C1 compensator assembly |
| 64 | 237-6005 | 1 | O-RING, 5-1, 90 Duro, .414″ ID x .072″ Thk |
| 65 | A49437 | 1 | PLUG, hex socket |
| 66 | 278548 | 1 | PLUG, Hex Soc, 7/16″-20 ORB |
| 67 | 237-6004 | 1 | O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk |
| 69 | 238-8011 | 1 | O-RING, -011,Cl8, .301″ ID x .070″ Thk |
| 71 | 61-31020 | 4 | SCREW, Hex Soc Hd, #10-24 x 1 1/4″ |
| 72 | A49436 | 1 | GASKET, mounting |
| 73 | 221-850 | 3 | PLUG, Hex Soc, 1/16″-27, hex socket, 1/16 inch PT |
| 77 | 238-6137 | 2 | O-RING, -137, 90 Duro, 2.05″ ID x .103″ Thk |
| 78 | A47280 | 1 | GASKET, housing |
| 79 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk |
| 80 | 238-8112 | 1 | O-RING, -112, Cl 8, .487″ ID x .103″ Thk |
| 81 | A49436 | 1 | GASKET, compensator |
| 82 | 238-8011 | 1 | O-RING, -011,Cl8, .301″ ID x .070″ Thk |
| 83 | 237-6004 | 1 | O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk |
| 84 | 237-6005 | 1 | O-RING, 5-1, 90 Duro, .414″ ID x .072″ Thk |
| 85 | 238-8015 | 1 | O-RING, -015, Cl 8, .551″ ID x .070″ Thk |
| 2 | 201-304 | 4 | ELBOW, 90є, 11/16″-16 x 9/16″-18 Adj, ORFS, 90 degree, 11/16-16 face seal x 9/16-18 inch adj |
| 3 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk, Boss end |
| 4 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, Face end |
| 5 | 401967R1 | 1 | ELBOW, 90 degree, 1/8 PT x 1/4 inch barb end |
| 6 | 201-403 | 1 | TEE, 1″-14 x 7/8″-14 Br, ORFS |
| 7 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk, Boss end |
| 8 | 238-6016 | 2 | O-RING, -016, 90 Duro, .614″ ID x .070″ Thk, Face end |
| 9 | 1968035C1 | 1 | PIPE, TUBE – booster, hitch |
| 10 | 515-25127 | 1 | CLAMP, 1/2″, Insul, 1/2″ Bolt, P-type, 1/2 inch ID |
| 11 | 95-81070 | 1 | WASHER, .344″ x 3/4″ x .120″, flat, 11/32 x 3/4 x 1/8 inch |
| 12 | 413-510 | 1 | BOLT, Hex, 5/16″-18 x 5/8″, G5, Full Thd |
| 13 | 201-409 | 1 | TEE, 13/16″-16 ORFS, 13/16-16 inch face seal branch x face seal x face seal |
| 14 | 238-6014 | 3 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk, Face end |
| 15 | 1342161C1 | 1 | HOSE ASSY., 737 mm (29 inch) long, cylinder, assist |
| 16 | 1269180C1 | 1 | FITTING, TEE – 1/4 x 1/4 barb end x 1/8 inch PT |
| 17 | 92949C5 | 1 | VALVE, ASSEMBLY – hitch control, parts list fig. 8-40 |
| 18 | 238-5125 | 1 | O-RING, -125, 70 Duro, 1.299″ ID x .070″ Thk, 1-5/16 ID x 3/32 inch wide |
| 19 | 814-10080 | 1 | BOLT, Hex, M10 x 80, 8.8, (With hitch) |
| 19 | 614-10020 | 1 | BOLT, Hex, M10 x 20, 8.8, Full Thd, Without hitch |
| 20 | 614-10035 | 1 | BOLT, Hex, M10 x 35, 8.8, Full Thd |
| 21 | 201-401 | 1 | TEE, 11/16″-16 x 9/16″-18 Br, ORFS, 9/16-18 adj O-ring boss branch x 11/16-16 inch face seal x face |
| 22 | 237-6004 | 1 | O-RING, 4-1, 90 Duro, .351″ ID x .072″ Thk, Boss end |
| 23 | 238-6011 | 2 | O-RING, -011, 90 Duro, .301″ ID x .070″ Thk, Face end |
| 24 | 201-304 | 1 | ELBOW, 90є, 11/16″-16 x 9/16″-18 Adj, ORFS, 90 degree, 11/16-16 face seal x 9/16-18 inch adj |
| 25 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk, Boss end |
| 26 | 238-6014 | 1 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk, Face end |
| 27 | 201-103 | 1 | CONNECTOR, HYD., 1″-14 ORFS x 7/8″-14 ORB |
| 28 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk, Boss end |
| 29 | 238-6016 | 1 | O-RING, -016, 90 Duro, .614″ ID x .070″ Thk, Face end |
| 30 | 201-334 | 1 | ELBOW, 90є, 13/16″-16, ORFS, 90 degree, 13/16-16 inch face seal (without hitch) |
| 31 | 238-6014 | 2 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 32 | 201-104 | 1 | CONNECTOR, HYD., 1 3/16″-12 ORFS x 1 1/16″-12 ORB |
| 33 | 237-6012 | 1 | O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk, Boss end |
| 34 | 238-6018 | 1 | O-RING, -018, 90 Duro, .739″ ID x .070″ Thk, Face end |
| 35 | 1289467C1 | 1 | BRACKET, support, tube (with hitch), 75 mm (2-31/32 inch) long, used with 3/8 inch tubes, prior to |
| 35 | 1334651C1 | 1 | BRACKET, support, tube (without hitch) with 3 weld nuts, used with 3/8 inch tubes, prior to tractor |
| 36 | 1342145C1 | 1 | PIPE, RETURN, TUBE – valve |
| 37 | 1289198C1 | 1 | PIPE, TUBE – inlet, valve |
| 38 | 1289368C4 | 1 | TUBE ASSY., signal |
| 39 | 1289364C1 | 1 | PIPE, TUBE – pressure, pilot |
| 40 | 1289228C1 | 1 | BRACKET, support, tube |
| 41 | 413-510 | 2 | BOLT, Hex, 5/16″-18 x 5/8″, G5, Full Thd |
| 42 | 92-11031 | 2 | WASHER, LOCK, 5/16″ |
| 43 | 515-2363 | 1 | CLAMP, M6.3, Insul, 3/8″ Bolt, P-type, 1/4 inch ID |
| 44 | 329-105 | 1 | NUT, 5/16″-18, G8 |
| 45 | 1968092C1 | 2 | PLATE, LARGE, CLAMP – tube |
| 46 | 614-6012 | 2 | BOLT, Hex, M6 x 12, 8.8 |
| 47 | 1968090C1 | 2 | CLAMP, tube, pilot |
| 48 | 1342116C1 | 1 | HOSE, 476 mm (18-3/4 inch) long, supply, cylinder |
| 49 | 93005C2 | 1 | CYLINDER ASSY., hitch control, parts list fig. 8-38 |
| 50 | 1957863C1 | 1 | SEAL ASSY., RING |
| 51 | 413-1060 | 2 | BOLT, Hex, 5/8″-11 x 3 3/4″, G5, BOLT – hex, 5/8 NC x 3-3/4 inch |
| 51 | 413-1028 | 2 | BOLT, Hex, 5/8″-11 x 1 3/4″, G5, hex, 5/8 NC x 1-3/4 inch |
| 52 | 1289479C1 | 1 | TEE, barbed, hose |
| 53 | 1349444C1 | 1 | TUBE, lubrication, draft cylinder |
| 54 | 1342864C2 | 1 | TUBE, lube, internal |
| 55 | 201-120 | 1 | CONNECTOR, HYD., 11/16″-16, Blkhd, ORFS, straight, 11/16-16 inch face seal x bulkhead face seal |
| 56 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, Face end |
| 57 | 1334641C1 | 1 | HOSE ASSY., 330 mm (13 inch) long, cut from 427683C1 bulk hose |
| 58 | 1289484C1 | 1 | HOSE ASSY., 115 mm (4-9/16 inch) long, cut from 427683C1 bulk hose |
| 59 | 1289487C1 | 1 | HOSE ASSY., 570 mm (22-7/16 inch) long |
| 1 | 235010A1 | 1 | PANEL, secondary control, replaces 123473A1 panel |
| 2 | 490-1108 | 4 | SCREW, Cross Pan Hd, #10-32 x 1/2″, machine, pan Phillips, No. 10 NF x 1/2 inch |
| 3 | 495-31022 | 4 | WASHER, #10 |
| 4 | A186061 | 2 | POTENTIOMETER, electrical, gauge, load and travel |
| 5 | 96729C1 | 2 | KNOB, lever, draft and sensing |
| 6 | 97121C1 | 2 | WASHER, friction |
| 7 | 96860C1 | 1 | KNOB, bar, stop |
| 8 | 1971243C1 | 1 | WASHER, nylon |
| 9 | 1259806C1 | 1 | BAR, stop-handle |
| 10 | 96677C1 | 1 | ROD, control |
| 11 | 96673C4 | 1 | LEVER ASSY., control |
| 12 | 96686C1 | 2 | RING, retaining |
| 13 | 877-1046 | 1 | SET SCREW, Hex Soc, M4 x 6, Cup Pt, set, hex socket, 4 – 0.7 x 6 mm, cup point |
| 14 | 829-1408 | 2 | NUT, M8, Cl 10 |
| 15 | 892-11008 | 2 | WASHER, LOCK, M8 |
| 16 | 495-11034 | 4 | WASHER, 5/16″, SAE, flat, 11/32 x 11/16 x 1/16 inch |
| 17 | 114255A2 | 2 | POTENTIOMETER, GAUGE – position |
| 18 | 97006C1 | 1 | BOLT, BOLT – hex flange, special, 6 – 1 x 20 mm |
| 19 | 96667C1 | 1 | PLATE ASSY., support |
| 20 | 96679C1 | 1 | STOP, handle |
| 21 | A177435 | 1 | KNOB,BALL, lever |
| 22 | 1280384C3 | 1 | HANDLE, hitch position control |
| 23 | 1283599C1 | 1 | BUSHING, pivot, lever |
| 24 | 614-6030 | 1 | BOLT, Hex, M6 x 30, 8.8, Full Thd |
| 25 | 96681C1 | 2 | SPACER, plate |
| 26 | 1340476C2 | 1 | SPACER, pivot support, 11 (7/16) x 19 (3/4) x 119 mm (4-45/64 inch) long |
| 27 | 1340477C1 | 1 | PLATE, LARGE, pivot support |
| 28 | 827-8160 | 2 | BOLT, Hex, M8 x 160, 10.9, BOLT – hex, 8 – 1.25 x 160 mm, class 10.9 |
| 29 | 814-12140 | 1 | BOLT, Hex, M12 x 140, 8.8 |
| 30 | 896-11012 | 1 | WASHER, M13.5 x 24.5 x 3, HT |
| 31 | 97203C2 | 1 | SPACER, pivot, 25/32 (19) x 1 (25) x 1-1/2 inch (39 mm) long, if used (used without hitch) |
| 31 | 189570A1 | 1 | SPACER, pivot, 25/32 (19) x 1 (25) x 1-1/4 inch (31 mm) long, if used (with or without hitch) |
| 1 | 1999493C3 | 1 | HOUSING, remote hitch switch, left-hand |
| 2 | 1999494C3 | 1 | HOUSING, remote hitch switch, right-hand |
| 3 | 1977716C1 | 2 | SUPPORT, angle, shield |
| 4 | 434-512 | 4 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 3/4″, G5, Full Thd |
| 5 | 495-21038 | 4 | WASHER, 5/16″, flat, 3/8 x 7/8 x 3/32 inch |
| 6 | 231-5145 | 4 | NUT, Flg, USR, 5/16″-18 |
| 7 | 125770A2 | 2 | COVER, remote hitch switch |
| 8 | 1276119C1 | 4 | SCREW, SELF TAPPING, Cross Pan Hd, #10 x 5/8″, pan cross slotted, locking, No. 10 – 16 x 5/8 inch |
| 9 | 96900C1 | 4 | NUT, U, #10-16, Panel type |
| 10 | 115713A1 | 4 | SWITCH, remote hitch raise/lower |
| 11 | 1987445C1 | 1 | HARNESS, remote hitch switch |
| 12 | 1999514C1 | 2 | LOOM, CONDUIT – remote switch harness |
| 13 | 1990709C2 | 1 | HANDLE, rear assist (see item 33, fig. 9-104, for handle on models without remote hitch) |
| 14 | 409-7512 | 2 | BOLT, Hex Flg, 5/16″-18 x 3/4″, Serr |
| 15 | 434-512 | 2 | BOLT, CARRIAGE, Short NK, 5/16″-18 x 3/4″, G5, Full Thd |
| 16 | 495-81140 | 2 | WASHER, 13/32″ x 1 1/4″ x .060″ |
| 17 | 131-434 | 2 | NUT, LOCK, Push, 5/16″, push-on type, 5/16 inch |
| 18 | 231-5145 | 2 | NUT, Flg, USR, 5/16″-18 |
| 19 | 495-21031 | 2 | WASHER, 1/4″, flat, 5/16 x 3/4 x 1/16 inch |
| 1 | 1341304C3 | 1 | BODY, TUBE ASSEMBLY – cylinder |
| 2 | 149638C1 | 2 | BUSHING, pivot, cylinder |
| 3 | 1341303C2 | 1 | ROD, PISTON |
| 4 | 149636C1 | 2 | BUSHING, pivot, rod |
| 5 | 219-14 | 2 | NIPPLE, LUBE, 1/4″ x .56″ lg, Drive, grease, straight, 1/4 drive type x 9/16 inch |
| 6 | 403845R1 | 1 | GASKET, seal, piston rod |
| 7 | 1261097C1 | 1 | SEAL, oil, piston |
| 8 | 238-5133 | 1 | O-RING, -132, 70 Duro, 1.799″ ID x .103″ Thk |
| 9 | 145387C1 | 1 | BACK-UP RING, piston rod quad ring |
| 10 | 145388C1 | 1 | SEALRING, RING – quad, piston rod |
| 11 | 1266757C1 | 1 | SNAP RING, retaining, piston rod, not shown |
| 1 | 1289125C2 | 1 | HOUSING, cylinder |
| 2 | 397229R1 | 1 | PISTON, cylinder |
| 3 | 238-6348 | 1 | O-RING, -348, 90 Duro, 4.350″ ID x .210″ Thk, Used with item 4 on some models, replaced by item 9 |
| 4 | 382605R2 | 1 | WASHER, RING – backup, used with item 3 on some models, replaced by item 9 seal |
| 5 | 1266861C92 | 1 | VALVE, relief |
| 6 | 238-6118 | 1 | O-RING, -118, 90 Duro, .862″ ID x .103″ Thk |
| 7 | 214389 | 1 | PLUG, Hex Hd, 3/4″-16 ORB, Replaces 9410359 plug |
| 8 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 9 | 230318A1 | 1 | GASKET, KIT – seal, service, includes seal and an instruction sheet |
| 1 | 238-5114 | 1 | O-RING, -114, 70 Duro, .612″ ID x .103″ Thk, , Part of the Seal Kit P/N 1971624C2, ordered individually |
| 3 | 1348235C1 | 1 | COIL ASSY., solenoid |
| 6 | A47983 | 1 | O-RING, 1/4 ID x 1/8 inch wide, Part of the Seal Kit P/N 1971624C2, ordered individually |
| 9 | 1346253C1 | 1 | BODY, solenoid mounting, order 1986877C1 servo repair kit, item 12 |
| 10 | 1971618C1 | 2 | SCREW, machine |
| 11 | 1971620C1 | 1 | SPRING, pivot lever |
| 12 | 1986877C1 | 1 | PACKAGE, KIT – servo, solenoid, servo |
| 15 | 211-1007 | 1 | BALL, 7/32″ Dia, Gr 24, Chrome alloy steel |
| 16 | 1971612C1 | 1 | SPRING, VALVE, sensing plug |
| 18 | 1971617C1 | 1 | O-RING, 1-3/16 ID x 1/16 inch wide, Part of the Seal Kit P/N 1971624C2, ordered individually |
| 19 | 1971609C1 | 1 | LEVER, pivot |
| 20 | 238-5009 | 2 | O-RING, -009, 70 Duro, .208″ ID x .070″ Thk, , Part of the Seal Kit P/N 1971624C2, ordered individually |
| 23 | 1971599C1 | 2 | WASHER, special, deep |
| 24 | 1971621C1 | 1 | SPRING, valve spool |
| 25 | 1971619C1 | 1 | SPACER, valve spool |
| 26 | 1971615C2 | 1 | SCREW, spool |
| 27 | 238-5125 | 1 | O-RING, -125, 70 Duro, 1.299″ ID x .070″ Thk, 1-5/16 ID x 3/32 inch wide, Part of the Seal Kit P/N |
| 28 | 1971616C1 | 1 | END ASSY., CAP |
| 29 | 1971603C1 | 1 | PLUG, ASSEMBLY – pivot |
| 30 | 1971604C1 | 1 | O-RING, 15/64 ID x 1/16 inch wide, Part of the Seal Kit P/N 1971624C2, ordered individually |
| 31 | 1971614C1 | 1 | PLUG, ASSEMBLY – slotted |
| 32 | 238-6115 | 1 | O-RING, -115, 90 Duro, .674″ ID x .103″ Thk, Plug (Replaces D31410 O-ring), Part of the Seal Kit P/N |
| 33 | 1971620C1 | 1 | SPRING, pivot lever |
| 35 | A47983 | 1 | O-RING, 1/4 ID x 1/8 inch wide, Part of the Seal Kit P/N 1971624C2, ordered individually |
| 36 | 238-6118 | 1 | O-RING, -118, 90 Duro, .862″ ID x .103″ Thk, , Part of the Seal Kit P/N 1971624C2, ordered individually |
| 40 | 238-6113 | 1 | O-RING, -113, 90 Duro, .549″ ID x .103″ Thk, , Part of the Seal Kit P/N 1971624C2, ordered individually |
| 13 | 237-6005 | 1 | O-RING, 5-1, 90 Duro, .414″ ID x .072″ Thk, (Replaces N6617 O-ring), Part of the Seal Kit P/N |
| 1 | 1978363C2 | 1 | COVER, end, remote hydraulic valve |
| 2 | 218-5158 | 1 | PLUG, Hex Hd, 1 1/16″-12 ORB, hex, 1-1/16-12 inch O-ring boss, if used |
| 3 | 237-6012 | 1 | O-RING, 12-1, 90 Duro, .924 ID x .118″ Thk |
| 4 | 9625178 | 1 | PLUG, Hex Soc, 9/16″-18 ORB |
| 9 | 238-6112 | 3 | O-RING, -112, 90 Duro, .487″ ID x .103″ Thk |
| 10 | 1994612C1 | 2 | STUD, 12 x 225 mm |
| 11 | 1334557C2 | 1 | STUD, 10 – 1.5 x 225 mm |
| 12 | 829-1312 | 2 | NUT, M12 x 1.75, Cl 10 |
| 13 | 829-1310 | 1 | NUT, M10, Cl 10, Class 10.9 |
| 5 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk |
| 3 | 201-103 | 4 | CONNECTOR, HYD., 1″-14 ORFS x 7/8″-14 ORB |
| 4 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk, Boss end |
| 5 | 238-6016 | 1 | O-RING, -016, 90 Duro, .614″ ID x .070″ Thk, Face end |
| 6 | 102214A1 | 1 | PIPE, TUBE – raise, first valve |
| 7 | 102216A1 | 1 | PIPE, TUBE – drop, first valve |
| 8 | 102217A1 | 1 | PIPE, TUBE – raise, second valve |
| 9 | 102218A1 | 1 | PIPE, TUBE – drop, second valve |
| 10 | 1334203C1 | 1 | SUPPORT ASSY., tube |
| 11 | 486004R1 | 1 | CLAMP, tube, upper |
| 12 | 224968C2 | 2 | STRIP, CLAMP – isomount strip, tube |
| 13 | 815-8070 | 1 | BOLT, Hex, M8 x 70, 8.8, BOLT – hex, 8 – 1.25 x 70 mm |
| 14 | 1348451C1 | 1 | SUPPORT, CLAMP – tube, lower, includes nut |
| 15 | 102518A1 | 1 | SUPPORT, BRACKET – coupler, left-hand |
| 16 | 628-16030 | 2 | BOLT, Hex, M16 x 30, 10.9, Full Thd, Bolt, Hex, M16 x 30, 10.9, Full Thd |
| 17 | 120012C1 | 1 | SUPPORT, coupler |
| 18 | 103866A2 | 2 | COUPLING, ASSEMBLY – quick disconnect, parts list fig. 8-74 |
| 19 | 201-306 | 4 | ELBOW, 90є, 1″-14 x 7/8″-14 Adj, ORFS, 90 degree, 1-14 face seal x 7/8-14 inch adj O-ring boss |
| 20 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk, Boss end |
| 21 | 238-6016 | 1 | O-RING, -016, 90 Duro, .614″ ID x .070″ Thk, Face end |
| 22 | 614-12025 | 2 | BOLT, Hex, M12 x 25, 8.8 |
| 23 | 628-12020 | 2 | BOLT, Hex, M12 x 20, 10.9, Full Thd, BOLT – hex, full threads, 12 – 1.75 x 20 mm, class 10.9 |
| 24 | 217-430 | 1 | PLUG, Hex Soc, 1/8″-27 |
| 25 | 221-1101 | 2 | FITTING, NIPPLE – straight, 1/8 PT x 3/4 inch |
| 26 | 1348264C1 | 1 | CLAMP, HOSE, 3/8 inch |
| 27 | 106514A1 | 1 | HOSE, LARGE, 808 mm (30 – 13/16 inch) long, coupler drain |
| 28 | L18337 | 1 | STRAP, CABLE, 9.95″-12.1″ lg, tie, 15 inch |
| 29 | 1272764C1 | 1 | SEAL ASSY., drain, coupler |
| 30 | 1334586C1 | 2 | PLUG, ADAPTER – coupler drain, special |
| 31 | 238-6116 | 2 | O-RING, -116, 90 Duro, .737″ ID x .103″ Thk |
| 32 | 1289481C1 | 1 | ELBOW, 90 degree second coupler |
| 33 | 1289480C1 | 1 | TEE, barbed, first coupler |
| 34 | 1289484C1 | 1 | HOSE ASSY., 115 mm (4-9/16 inch) long, cut from 427683C1 bulk hose, coupler to tee |
| 35 | 1334641C1 | 1 | HOSE ASSY., 330 mm (13 inch) long, cut from 427683C1 bulk hose, coupler tee to tee or elbow at |
| 36 | 1334581C2 | 1 | DECAL, 1 ISO, first coupler, shown on fig. 9-146 |
| 37 | 1334582C2 | 1 | DECAL, 2 ISO, second coupler, shown on fig. 9-146 |
| 38 | 103871A1 | 4 | CAP, PLUG – dust, coupler |
| 41 | 401967R1 | 1 | ELBOW, 90 degree, 1/8 PT x 1/4 inch barb end, used on models without hitch |
| 42 | 1289479C1 | 1 | TEE, barbed, used on models with hitch |
| 43 | 104301A1 | 2 | COVER, DOOR, coupler |
| 44 | 104302A1 | 2 | PLATE, retaining |
| 45 | 104303A1 | 2 | SCREW, BOLT – shoulder |
| 46 | 461-4258 | 2 | SCREW, Hex Soc Flat Hd, 1/4″-20 x 1/2″, BOLT – hex socket, 1/4 NC x 1/2 inch |
| 47 | 110947A1 | 2 | WASHER, flat, special |
| 48 | 110945A1 | 2 | SPRING, coupler door |
| 1 | 1978363C2 | 1 | COVER, end, remote hydraulic valve |
| 2 | 201-105 | 1 | CONNECTOR, HYD., 1 7/16″-12 ORFS x 1 5/16″-12 ORB, ADAPTER – straight, 1-7/16-12 face seal x |
| 3 | 237-6016 | 1 | O-RING, 16-1, 90 Duro, 1.171″ ID x .118″ Thk, Boss end |
| 4 | 238-6021 | 1 | O-RING, -021, 90 Duro, .926″ ID x .070″ Thk, Face End |
| 5 | 1976746C1 | 1 | HOSE, 533 mm (21 inch) long, bleed, return |
| 6 | 201-101 | 1 | CONNECTOR, HYD., 11/16″-16 ORFS x 9/16″-18 ORB, ADAPTER – straight, 11/16-16 face seal x |
| 8 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, Face end |
| 9 | 1976749C1 | 1 | PROTECTOR, SLEEVE – corrugated, 520 mm (20-15/32 inch) long, cut from 1978484C2 bulk sleeve |
| 10 | 1976744C2 | 1 | COVER ASSY, opening, transmission, see fig. 6-18, item 20 |
| 7 | 237-6006 | 1 | O-RING, 6-1, 90 Duro, .468″ ID x .078″ Thk, Boss end |
| 2 | G108675 | 1 | SPRING, 63.9 mm long, control, flow, prior to transmission serial number AJB0014383, Questions |
| 2 | 1980066C1 | 1 | SPRING, 67.7 mm long, control, flow, transmission serial number AJB0014383 and after |
| 3 | 1957861C1 | 1 | WASHER, retainer |
| 4 | 1957862C1 | 1 | PISTON, load check |
| 5 | 1957859C1 | 1 | RING, SNAP |
| 6 | 71121 | 1 | SEAL, WIPER – piston |
| 7 | G110391 | 1 | O-RING, piston |
| 8 | 86529630 | 1 | PLUG, Hex Soc, 3/8″-24 ORB |
| 9 | 237-6003 | 1 | O-RING, 3-1, .301″ ID x .064″ Thk |
| 11 | 1543364C1 | 1 | STUD, detent |
| 12 | G108913 | 1 | CUP, SPRING, SEAT – spring, outer |
| 13 | G108914 | 1 | CUP, SPRING, SEAT – spring, inner |
| 14 | G108915 | 1 | SPRING, centering |
| 15 | G108630 | 1 | HOLDER, RETAINER – O-ring |
| 16 | G110391 | 1 | O-RING, spool |
| 17 | 237-6002 | 1 | O-RING, 2-1, .239″ ID x .064″ Thk |
| 19 | 1543329C1 | 1 | POPPET, VALVE, PLUG – load check |
| 20 | G108723 | 1 | RING, backup |
| 21 | 238-6015 | 1 | O-RING, -015, 90 Duro, .551″ ID x .070″ Thk |
| 22 | 1994581C1 | 1 | SPRING, load check |
| 29 | 1346312C2 | 1 | PLUG, sleeve |
| 30 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 31 | L31750 | 1 | CIRCLIP, 0.562″, Int, #56, 0.562″, Int, #56 |
| 32 | 1980302C2 | 1 | ROD, ASSEMBLY – adjusting, flow |
| 33 | 138-56 | 1 | PIN, LOCK, 1/8″ x 11/16″, Slotted |
| 34 | G101066 | 1 | SEAL, oil |
| 35 | 1980226C1 | 1 | PLUG, adjusting |
| 36 | 1980227C1 | 1 | PLUG, NUT – compression |
| 37 | G108956 | 1 | RACE, bearing, thin |
| 38 | G108957 | 1 | RACE, bearing, thick |
| 39 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk |
| 40 | 1986628C1 | 5 | O-RING, 3/8 ID x 9/16 inch wide |
| 41 | F13537 | 1 | BEARING, thrust |
| 50 | 1976957C1 | 1 | COVER ASSY, detent |
| 51 | G108911 | 1 | WASHER, detent, ball outer |
| 52 | G108912 | 1 | WASHER, detent, ball inner |
| 53 | 211-1007 | 8 | BALL, 7/32″ Dia, Gr 24, Chrome alloy steel |
| 54 | 1341975C1 | 1 | CUP, SPRING, RETAINER – detent |
| 55 | G107780 | 1 | VALVE, CHECK, PLUG – retainer |
| 56 | G110152 | 1 | SPRING, detent |
| 57 | G108908 | 1 | PISTON, detent |
| 58 | G108728 | 1 | BACK-UP RING, large |
| 59 | G108922 | 1 | BACK-UP RING, small |
| 60 | 238-6020 | 1 | O-RING, -020, 90 Duro, .864″ ID x .070″ Thk |
| 61 | 238-6021 | 1 | O-RING, -021, 90 Duro, .926″ ID x .070″ Thk |
| 62 | G110300 | 1 | PLUG, adjusting, pilot relief |
| 63 | G110279 | 1 | POPPET, VALVE, relief |
| 64 | G110289 | 1 | BACK-UP RING |
| 69 | G110281 | 2 | CUP, SPRING, WASHER – retainer |
| 70 | G108918 | 1 | ORIFICE, WASHER – orifice |
| 71 | G109275 | 1 | SPRING, pilot |
| 72 | 238-6011 | 1 | O-RING, -011, 90 Duro, .301″ ID x .070″ Thk |
| 73 | 238-6015 | 1 | O-RING, -015, 90 Duro, .551″ ID x .070″ Thk |
| 75 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 76 | 425-1510 | 1 | NUT, Jam, 5/8″-18, G5, Hex |
| 77 | 238-5004 | 1 | O-RING, -004, 70 Duro, .07″ ID x .070″ Thk |
| 78 | 100-21118 | 1 | RING, SNAP, 1.188″, Int, #118, (Replaces A30975) |
| 79 | 61-31016 | 3 | SCREW, Hex Soc Hd, #10-24 x 1″ |
| 80 | 495-11022 | 3 | WASHER, #10, (Flat, 7/32″ x 7/16″ x 3/64″) |
| 86 | 1957817C1 | 1 | SPRING, VALVE, poppet |
| 87 | 1957964C1 | 1 | RETAINER, spring |
| 88 | 1957965C1 | 1 | SPRING, VALVE, main |
| 91 | G110295 | 1 | O-RING, -013, 90 Duro, .426″ ID x .070″ Thk, poppet |
| 92 | G110287 | 1 | BACK-UP RING, inner |
| 93 | G108727 | 1 | BACK-UP RING, outer |
| 94 | 238-6014 | 2 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 95 | 237-6008 | 2 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 96 | G108724 | 1 | BACK-UP RING |
| 97 | 1971475C1 | 1 | PLUG, lock check |
| 98 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 99 | 238-6013 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, 7/16 ID x 1/16 inch wide, poppet, replaces G110295 |
| 100 | G110287 | 1 | BACK-UP RING, inner |
| 2 | 185447A1 | 1 | SPRING, control, flow |
| 3 | 1957861C1 | 1 | WASHER, retainer |
| 4 | 1957862C1 | 1 | PISTON, load check |
| 5 | 1957859C1 | 1 | RING, SNAP |
| 6 | 71121 | 1 | SEAL, WIPER – piston |
| 7 | G110391 | 1 | O-RING, piston |
| 8 | 86529630 | 1 | PLUG, Hex Soc, 3/8″-24 ORB |
| 9 | 237-6003 | 1 | O-RING, 3-1, .301″ ID x .064″ Thk |
| 10 | 1542571C1 | 1 | SPOOL, main |
| 11 | 246405A1 | 1 | STUD, detent, secure with 345-601 adhesive, replaces 1543364C1 stud |
| 12 | G108913 | 1 | CUP, SPRING, SEAT – outer |
| 13 | G108914 | 1 | CUP, SPRING, SEAT – inner |
| 14 | G108915 | 1 | SPRING, centering |
| 15 | G108630 | 1 | HOLDER, RETAINER – O-ring |
| 16 | G110391 | 1 | O-RING, spool |
| 17 | 237-6002 | 1 | O-RING, 2-1, .239″ ID x .064″ Thk |
| 19 | 1543329C1 | 1 | POPPET, VALVE, PLUG – load check |
| 20 | G108723 | 1 | RING, backup |
| 21 | 238-6015 | 1 | O-RING, -015, 90 Duro, .551″ ID x .070″ Thk |
| 22 | 1994581C1 | 1 | SPRING, load check |
| 29 | 183491A1 | 1 | PLUG, sleeve |
| 30 | 238-6013 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, 7/16 ID x 1/16 inch wide |
| 32 | 1980302C2 | 1 | ROD, ASSEMBLY – adjusting, flow |
| 33 | 138-56 | 1 | PIN, LOCK, 1/8″ x 11/16″, Slotted |
| 34 | G101066 | 1 | SEAL, oil |
| 35 | 1980226C1 | 1 | PLUG, adjusting |
| 36 | 1980227C1 | 1 | PLUG, NUT – compression |
| 37 | G108956 | 1 | RACE, bearing, thin |
| 38 | G108957 | 1 | RACE, bearing, thick |
| 39 | 237-6010 | 1 | O-RING, 10-1, 90 Duro, .755″ ID x .097″ Thk |
| 40 | 1986628C1 | 5 | O-RING, 3/8 ID x 9/16 inch wide |
| 41 | F13537 | 1 | BEARING, thrust |
| 50 | 186439A1 | 1 | COVER ASSY, detent |
| 51 | G108911 | 1 | WASHER, detent, ball outer |
| 52 | G108912 | 1 | WASHER, detent, ball inner |
| 53 | 211-1007 | 8 | BALL, 7/32″ Dia, Gr 24, Chrome alloy steel |
| 54 | 321361A1 | 1 | RETAINER, ASSEMBLY – detent |
| 55 | G107780 | 1 | VALVE, CHECK, PLUG – retainer |
| 56 | G110152 | 1 | SPRING, detent |
| 57 | G108908 | 1 | PISTON, detent |
| 58 | G108728 | 1 | BACK-UP RING, large |
| 59 | G108922 | 1 | BACK-UP RING, small |
| 60 | 238-6020 | 1 | O-RING, -020, 90 Duro, .864″ ID x .070″ Thk |
| 61 | 238-6021 | 1 | O-RING, -021, 90 Duro, .926″ ID x .070″ Thk |
| 62 | G110300 | 1 | PLUG, adjusting, pilot relief |
| 63 | G110279 | 1 | POPPET, VALVE, relief |
| 64 | G110289 | 1 | BACK-UP RING |
| 69 | G110281 | 2 | CUP, SPRING, WASHER – retainer |
| 70 | G108918 | 1 | ORIFICE, WASHER – orifice |
| 71 | G109275 | 1 | SPRING, pilot |
| 72 | 238-6011 | 1 | O-RING, -011, 90 Duro, .301″ ID x .070″ Thk |
| 73 | 238-6015 | 1 | O-RING, -015, 90 Duro, .551″ ID x .070″ Thk |
| 75 | 238-6012 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk |
| 76 | 425-1510 | 1 | NUT, Jam, 5/8″-18, G5, Hex |
| 77 | 238-5004 | 1 | O-RING, -004, 70 Duro, .07″ ID x .070″ Thk |
| 78 | 100-21118 | 1 | RING, SNAP, 1.188″, Int, #118 |
| 79 | 61-31016 | 3 | SCREW, Hex Soc Hd, #10-24 x 1″ |
| 80 | 495-11022 | 3 | WASHER, #10, (Flat, 7/32″ x 7/16″ x 3/64″) |
| 86 | 1957817C1 | 1 | SPRING, VALVE, poppet |
| 87 | 1957964C1 | 1 | RETAINER, spring |
| 88 | 1957965C1 | 1 | SPRING, VALVE, main |
| 91 | G110295 | 1 | O-RING, -013, 90 Duro, .426″ ID x .070″ Thk, poppet |
| 92 | G110287 | 1 | BACK-UP RING, inner |
| 93 | G108727 | 1 | BACK-UP RING, outer |
| 94 | 238-6014 | 2 | O-RING, -014, 90 Duro, .489″ ID x .070″ Thk |
| 95 | 237-6008 | 2 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 96 | G108724 | 1 | BACK-UP RING |
| 97 | 1971475C1 | 1 | PLUG, lock check |
| 98 | 237-6008 | 1 | O-RING, 8-1, 90 Duro, .644″ ID x .087″ Thk |
| 99 | 238-6013 | 1 | O-RING, -012, 90 Duro, .364″ ID x .070″ Thk, 7/16 ID x 1/16 inch wide, poppet, replaces G110295 |
| 100 | G110287 | 1 | BACK-UP RING, inner |
| 2 | 1957887C1 | 1 | SPRING, control, flow |
| 3 | 1957861C1 | 1 | WASHER, retainer |
| 4 | 1957862C1 | 1 | PISTON, load check |
| 5 | 1957859C1 | 1 | RING, SNAP |
| 6 | 71121 | 1 | SEAL, WIPER – piston |
| 7 | G110391 | 1 | O-RING, piston |
| 8 | 86529630 | 1 | PLUG, Hex Soc, 3/8″-24 ORB |
| 9 | 237-6003 | 1 | O-RING, 3-1, .301″ ID x .064″ Thk |
| 10 | 1542571C1 | 1 | SPOOL, main |
| 11 | 246405A1 | 1 | STUD, detent, replaces 1543364C1 stud |
| 12 | G108913 | 1 | CUP, SPRING, SEAT – spring, outer |
| 13 | G108914 | 1 | CUP, SPRING, SEAT – spring, inner |
| 14 | G108915 | 1 | SPRING, centering |
| 15 | G108630 | 1 | HOLDER, RETAINER – O-ring |
| 16 | G110391 | 1 | O-RING, spool |
| 17 | 237-6002 | 1 | O-RING, 2-1, .239″ ID x .064″ Thk |