7220 CASE IH Magnum Tractor (North America)
7220 CASE IH Magnum Tractor (North America) — parts list, part 5 of 5
Assemblies on this page: Parts list (continued) … Parts list (continued).
Parts list (continued)
| Pos | Part no. | Qty | Description |
|---|---|---|---|
| 4 | A165523 | 2 | FASTENER, RETAINER – special |
| 5 | 440-11012 | 2 | SCREW, Cross Pan Hd, #10-24 x 3/4″, machine, pan Phillips, No. 10 NC x 3/4 inch |
| 10 | 97133C1 | 1 | VISOR, SUN |
| 11 | 1971367C2 | 2 | SCREW, SELF TAPPING, Cross Oval Hd, #10-16 x 3/4″, self-tapping, oval head Phillips, No. 10 – 16 x |
| 1 | 96671C3 | 1 | GLASS, window, right side |
| 2 | 1987247C2 | 1 | SEAL, window |
| 4 | K303517 | 2 | PIN, LARGE, hinge |
| 5 | 800-418 | 2 | RING, SNAP, M8, Ext, external retaining, No. 8, replaces 31355R1 ring |
| 6 | K303501 | 2 | SPACER, rubber |
| 7 | K303571 | 2 | WASHER, flat, 6 mm |
| 10 | 1999808C1 | 2 | HINGE, window |
| 11 | 107135A1 | 2 | SCREW, BOLT – hex flange |
| 12 | 97005C1 | 2 | NUT, hex flange, self-locking, special, 6 mm – 1 |
| 13 | 1954284C1 | 2 | BRACKET, cylinder, sector |
| 14 | 97006C1 | 4 | BOLT, BOLT – hex flange, special, 6 – 1 x 20 mm |
| 15 | 97005C1 | 4 | NUT, hex flange, self-locking, special, 6 mm – 1 |
| 16 | 109171C1 | 4 | BUSHING, bolt |
| 18 | 109587C2 | 2 | PAD, bracket |
| 19 | 1954283C1 | 2 | BOLT, SPREADER, hex shoulder, 6 x 25 mm |
| 20 | 1954279C1 | 10 | WASHER, flat, 7 x 16 x 2 mm |
| 21 | 96849C2 | 6 | WASHER, spring, curved |
| 22 | 96814C3 | 4 | WASHER, flat, special, sector |
| 23 | 427-5071 | 2 | PIN, CLEVIS, 5/16″ x .719″, 5/16 x 23/32 inch, hardened, replaces 24660R1 pin |
| 24 | 1954280C1 | 2 | WASHER, flat, pivot |
| 25 | 432-612 | 2 | PIN, SPLIT (COTTER), 3/32″ x 3/4″ |
| 28 | 96810C5 | 2 | ARM, sector, window |
| 29 | 1954277C1 | 2 | COVER ASSY, arm, latch |
| 30 | 175-466 | 2 | SCREW, Sltd Truss Hd, 5/16″-18 x 5/8″, machine, truss head Phillips, 5/16 NC x 5/8 inch |
| 1 | 1340194C1 | 1 | GLASS, window, door |
| 2 | 1340195C1 | 1 | GLASS, windshield, upper |
| 4 | 96902C1 | 2 | SPACER, windshield, upper |
| 5 | 262-15516 | 2 | SCREW, SELF TAPPING, Hex Pan Hd, #10 x 1″, self-tapping, pan Phillips, No. 10-16 x 1 inch |
| 8 | 1340196C1 | 1 | GLASS, lower, windshield, left |
| 9 | 1340197C1 | 1 | GLASS, lower, windshield, right |
| 11 | 1981771C2 | 2 | SEAL, windshield |
| 12 | 1340200C1 | 1 | GLASS, CAB, window, left rear side |
| 13 | 97268C1 | 4 | SPACER, bonded glass, adhesive back, door window |
| 1 | 1340289C1 | 1 | MAT, FLOOR, front, foot throttle holes must be manually cut out |
| 2 | 104596A1 | 1 | MAT, FLOOR, rear |
| 3 | 97118C2 | 1 | PAD, floor mat, front |
| 4 | 97122C1 | 1 | PAD, floor mat, front corner |
| 5 | 104597A1 | 1 | MAT, FLOOR, PAD – rear |
| 6 | 1971248C1 | 1 | PLATE, LARGE, BARRIER – noise, front |
| 7 | 104599A1 | 1 | ANTISQUEAK, BARRIER – noise, rear |
| 8 | 1971249C1 | 1 | PLATE, LARGE, BARRIER – noise, front corner |
| 9 | 104600A1 | 1 | PLATE, LARGE, BARRIER – noise, right console |
| 10 | 1977905C2 | 2 | PAD, front mount cover |
| 1 | 1999971C3 | 1 | PADDING, COVER – rear cab post, right side |
| 3 | 1999972C1 | 1 | PADDING, COVER – front cab post, right side |
| 7 | 96720C2 | 1 | COVER ASSY, front cab post, left side lower |
| 8 | 96719C3 | 1 | COVER ASSY, front cab post, left side upper |
| 10 | 96717C4 | 1 | COVER ASSY, fender crown |
| 11 | 96716C1 | 1 | COVER ASSY, center cab post |
| 13 | 1990584C1 | 1 | COVER ASSY, rear cab panel, if equipped |
| 15 | 96735C2 | 1 | COVER ASSY, rear cab post left side |
| 16 | 1999998C1 | 1 | COVER ASSY, rear sill lower |
| 17 | 97227C2 | 1 | PANEL ASSY., trim, cab middle |
| 19 | 96715C2 | 1 | PANEL ASSY., rear corner left side trim |
| 20 | 1958720C1 | 1 | STUD, ball, external thread |
| 21 | 1990952C1 | 2 | SCREW, Phillips washer, No. 10-16 x 1 inch (Gray) |
| 22 | 1977665C1 | 1 | PAD, console fender, right |
| 23 | 1977664C1 | 1 | PAD, fender, front top, right |
| 24 | 1977916C1 | 1 | PAD, fender, center, right |
| 25 | 1977918C2 | 1 | PAD, INSULATOR – fender, lower rear, right |
| 26 | 1344390C1 | 1 | PANEL, PAD – rear trim panel, right |
| 27 | 123346A2 | 1 | SEAL, grommet, rear access panel |
| 28 | 123081A1 | 1 | ANGLE, mounting |
| 29 | 112332A1 | 1 | SEAL, access panel |
| 31 | 261-1456 | 2 | SCREW, SELF TAPPING, Cross Pan Hd, #10 x 3/8″ |
| 1 | 96753C1 | 1 | PANEL ASSY., HEADLINER – cab, front |
| 2 | 104033C2 | 6 | SCREW, SELF TAPPING, Cross Wash Hd, M4.8 x 19, Coated, self-tapping, truss head, No. 10 – 16 x |
| 3 | 143309C1 | 2 | SCREW, SELF TAPPING, Cross Pan Hd, #10-16 x 1/2″, self-tapping, pan Phillips head, No. 10 – 16 x |
| 4 | 97172C1 | 2 | SCREW, SELF TAPPING, Cross Pan Hd, #10-16 x 1″, pan head cross slot tap, replaces 1971376C1 |
| 7 | 97168C1 | 1 | STRIP, SEAL – foam, 1100 mm (43-5/1 6 inch) long, cut from 187874C1 bulk seal |
| 8 | 98390C1 | 2 | STRIP, SEAL – 13 (1/2) wide x 1000 (39-3/8) long x 25 mm (1 inch) thick, cut from 1974884CX bulk |
| 9 | 1958752C1 | 8 | PORT, LOUVER – bezel, front window |
| 10 | 97267C5 | 1 | ROOF, HEADLINER – cab, rear, used on models with oval speakers, if used |
| 11 | 97201C1 | 4 | CLIP, spring, U-shaped |
| 12 | 97016C1 | 1 | ANGLE, SUPPORT – front, headliner left |
| 13 | 143306C1 | 3 | SCREW, SELF TAPPING, Cross Pan Hd, #10 x 1/2″, pan head cross slotted, No. 10-16 x 1/2 inch |
| 15 | 97024C1 | 1 | SUPPORT ASSY., headliner, rear left |
| 16 | 1330157C1 | 2 | NUT, self-locking, hex flange, special, 1/4 inch NC |
| 17 | 96979C1 | 1 | GRILLE, speaker, left |
| 18 | 96980C1 | 1 | GRILLE, speaker, right |
| 19 | 97058C1 | 8 | CLIP, spring, retaining |
| 22 | 96813C2 | 1 | PANEL ASSY., switch |
| 23 | 1270762C1 | 6 | SCREW, SELF TAPPING, pan head Phillips, self-tapping, No. 10-16 x 3/4 inch |
| 24 | 1983391C1 | 1 | LAMP, dome |
| 25 | E35556 | 1 | BULB, lamp |
| 26 | 83882C91 | 1 | LAMP, ASSEMBLY – console illumination, console |
| 27 | D71346 | 1 | LAMP, TAIL, lamp, No. 168 |
| 28 | 107329C1 | 1 | HARNESS, WIRE, AND CABLE – bulb |
| 29 | 1327506C1 | 2 | SCREW, SELF TAPPING, Cross Pan Hd, M4.8 x 19, Coated, Replaces 104033C2 screw |
| 30 | 92100C2 | 1 | SWITCH, blower. |
| 31 | 92101C1 | 1 | SWITCH, thermostat |
| 32 | 122579A1 | 1 | SWITCH, PRESSURE, low pressure, air conditioner |
| 33 | 92115C2 | 1 | SWITCH, wiper, windshield |
| 35 | 1964672C1 | 1 | LIGHT, indicator, amber, 14 volt, air conditioner |
| 36 | 96893C1 | 4 | KNOB, control, switch |
| 37 | 1977668C1 | 1 | FOAM, PAD – headliner, front |
| 38 | 198738A1 | 1 | PADDING, HEADLINER – cab, rear, used on models with round speakers, if used, not shown |
| 39 | 117987C1 | 6 | NUT, U-type, No. 10-16, not shown |
| 40 | 199740A1 | 8 | RETAINER, NUT – U-type, No. 8-32, not shown |
| 41 | 1535219C1 | 1 | COVER, cover, radio opening |
| 42 | 1975866C1 | 1 | PLATE ASSY., cover, decal, radio opening, models without radio, shown on fig.9-150 |
| 1 | 1977564C2 | 1 | BLOWER, cab, air, component parts are not serviced separately |
| 2 | 97006C1 | 4 | BOLT, BOLT – hex flange, special, 6 – 1 x 20 mm |
| 3 | 825-2406 | 4 | NUT, M6 x 1, Flg, Cl 8 |
| 4 | 1343938C2 | 1 | RESISTOR, blower, replaces 1343938C1 resistor |
| 5 | 30495R1 | 2 | SCREW, Cross Pan Hd, M3 x 12, pan head, 3 x 12 mm |
| 6 | 824-1403 | 2 | NUT, M3, Cl 5 |
| 7 | 97032C5 | 1 | SUPPORT, blower |
| 8 | 231-5144 | 10 | NUT, Flg, USR, 1/4″-20 |
| 9 | 97198C2 | 2 | SEAL, 1080 mm (42-17/32 inch) long, cut from 195917C1 bulk seal |
| 10 | 180462A1 | 2 | HOSE, SEAL – 356 mm (14-1/64 inch) long, cut from 182747C2 bulk seal |
| 11 | 1954714C1 | 2 | EDGE, TRIM – edge, 41 mm (1-5/8 inch) long, cut from 1327666C1 bulk trim |
| 12 | 143481C2 | 1 | AIR CLEANER, FILTER – cab |
| 13 | 1340339C1 | 1 | PANEL, ASSEMBLY – inner roof |
| 14 | 97176C1 | 23 | STUD, inner roof panel |
| 15 | 231-5144 | 7 | NUT, Flg, USR, 1/4″-20 |
| 16 | 97199C1 | 1 | STRIP, SEAL – 1750 mm (68-29/32 inch) long, cut from 182747C2 bulk seal |
| 17 | 97200C1 | 1 | STRIP, SEAL – 4440 mm (174-13/16 inch) long, cut from 182747C2 bulk seal |
| 18 | 1330955C2 | 15 | RIVET, mandrel, 3/16 inch |
| 19 | 1331102C2 | 2 | GRILLE, LOUVER – air recirculation |
| 20 | 97212C1 | 12 | SCREW, pan head, No. 6-20 x 7/8 inch |
| 22 | 97181C2 | 1 | PANEL ASSY., recirculated air filter |
| 23 | 97142C1 | 2 | FILTER CARTRIDGE, recirculated air |
| 24 | 97135C1 | 3 | KNOB, recirculation panel |
| 28 | 417-440 | 2 | BOLT, Sq Hd, 1/4″-20 x 2 1/2″, G2, BOLT – square head, 1/4 NC x 2-1/2 inch, grade 2 |
| 29 | 1971364C1 | 2 | RETAINER, bolt |
| 34 | 169850C2 | 2 | CLIP, CABLE, CLIP – retaining, inner roof panel, right-hand side |
| 35 | 1977988C1 | 4 | FOAM, PAD – foam, filler |
| 36 | 362123R1 | 4 | CLIP, harness retaining |
| 1 | 1990757C1 | 1 | EVAPORATOR, ASSEMBLY – air conditioning and heater, see fig. 9-134 for valve and seals |
| 2 | 1954493C1 | 1 | HOSE, 3505 mm (138 inch) long, cut from 97252CX bulk hose, heater supply |
| 3 | 96880C2 | 1 | HOSE ASSY., heater, core inlet, replaces 96881C2 hose |
| 4 | 1301342C1 | 1 | FITTING, ADAPTER – straight, special |
| 5 | 1954736C1 | 8 | CLAMP, HOSE, adjustable |
| 6 | 1331087C1 | 1 | VALVE, CONTROL, control, heater |
| 7 | 97116C1 | 1 | BRACKET, SUPPORT – heater valve |
| 8 | 260-5448 | 2 | SCREW, SELF TAPPING, Cross Pan Hd, #8 x 1/2″, Phillips |
| 9 | 473321C1 | 2 | STRAP, CABLE, .098″ x 8″, tie |
| 12 | 96893C1 | 1 | KNOB, control |
| 13 | 96879C1 | 1 | LEVER, heater control |
| 14 | 109311H | 1 | NUT, hex, jam, 7/16-28 NF |
| 15 | 96877C2 | 1 | CABLE PULLING GRIP, CABLE – heater control |
| 16 | 1954626C1 | 1 | CLAMP, CLIP – retaining |
| 17 | 96880C2 | 1 | HOSE ASSY., heater, core to valve |
| 18 | 1954494C1 | 1 | HOSE, LARGE, 4267 mm (168 inch) long, cut from 97252CX bulk hose, return |
| 19 | 107107A1 | 1 | VALVE, SHUT-OFF, water shutoff, right-hand side |
| 20 | 105581A1 | 1 | CONNECTOR, BUSHING – pipe reducer, 1/2 x 3/8 inch |
| 21 | 1348531C1 | 1 | ADAPTER, ELBOW – 45 degree, 1/2 NPT x 5/8 inch hose, left-hand side |
| 1 | 1990757C2 | 1 | EVAPORATOR, ASSEMBLY – air conditioning and heater |
| 1 | 128485A1 | 1 | O-RING, 9/16 ID x 1/16 inch wide |
| 2 | 128484A1 | 1 | O-RING, 7/16 ID x 1/16 inch wide |
| 3 | 1990756C2 | 1 | VALVE, expansion |
| 4 | 98357C1 | 1 | SEAL, 13 (1/2) x 790 (31-3/32) x 25 mm (1 inch) thick, cut from 1974884CX seal |
| 5 | 1954790C1 | 1 | GROMMET, rubber, evaporator tubes |
| 6 | 83822C1 | 1 | TAPE, ADHESIVE, 610 mm (24 inch) long, cut from 1954475C1 bulk tape, rubber, insulator |
| 7 | 1266352C2 | 2 | HOSE, LARGE, 2290 mm (90-5/32 inch) long, cut from 87769CX bulk hose, condensate |
| 8 | 123329A1 | 1 | HOSE, 1790 mm (70-15/32 inch) long, discharge, cab evaporator |
| 9 | 128485A1 | 2 | O-RING, 9/16 ID x 1/16 inch wide |
| 10 | 1250594C1 | 2 | CORE, VALVE |
| 11 | 122553A1 | 1 | CAP, sealing, low side service port |
| 12 | 128483A1 | 1 | O-RING, 5/16 ID x 1/16 inch wide, at pressure switch fitting |
| 17 | 1999928C1 | 1 | HOSE, 1760 mm (69-19/64 inch) long, cab liquid |
| 18 | 128483A1 | 2 | O-RING, 5/16 ID x 1/16 inch wide |
| 19 | 1974764C1 | 2 | FITTING, drain, condensate hose |
| 20 | 1340439C1 | 2 | WASHER, drain, for service order 238-5210 O-ring |
| 21 | 1340438C1 | 2 | NUT, drain fitting |
| 1 | 1999922C1 | 1 | HOSE, 1650 mm (65 inch) long, suction, compressor to cab base |
| 2 | 128485A1 | 1 | O-RING, 9/16 ID x 1/16 inch wide, at compressor |
| 3 | 1250594C1 | 1 | CORE, VALVE |
| 4 | 122553A1 | 1 | CAP, sealing |
| 5 | 1999925C1 | 1 | INDICATOR, SWITCH – high pressure, 375 PSI, used in production, for service order 232948A1 400 |
| 6 | A184700 | 1 | CONDENSER, air conditioning |
| 7 | 131250A2 | 1 | HOSE, 750 mm (29-17/32 inch) long, condenser to receiver-drier |
| 8 | 128483A1 | 2 | O-RING, 5/16 ID x 1/16 inch wide |
| 9 | 1954474C4 | 1 | SHIN, CLAMP – retaining |
| 10 | 1954473C3 | 1 | CLAMP, retaining |
| 11 | 614-10025 | 1 | BOLT, Hex, M10 x 25, 8.8, Full Thd |
| 12 | 825-1410 | 1 | NUT, M10, Cl 8 |
| 13 | 892-11010 | 1 | WASHER, LOCK, M10 |
| 14 | 1954490C2 | 1 | CLAMP, retaining |
| 15 | 413-816 | 1 | BOLT, Hex, 1/2″-13 x 1″, G5, Full Thd |
| 16 | 80679 | 1 | WASHER, LOCK, 1/2″ |
| 17 | 425-108 | 1 | NUT, 1/2″-13, G5 |
| 18 | 1954766C2 | 1 | CLAMP, retaining |
| 19 | 30931R1 | 2 | SCREW, SELF TAPPING, Flat Hd, M6 x 13, special, 6 x 12 mm |
| 20 | A141489 | 1 | SUPPORT, BRACKET – pivot, condenser |
| 21 | 413-510 | 2 | BOLT, Hex, 5/16″-18 x 5/8″, G5, Full Thd |
| 22 | 492-11031 | 2 | WASHER, LOCK, 5/16″ |
| 25 | 117-2 | 1 | BOLT, Sq Hd, 1/4″-20 x 8 1/2″, G2, BOLT – square head, 1/4 NC x 8-1/2 inch, grade 2 |
| 26 | 231-1444 | 1 | NUT, LOCK, 1/4″-20, GB |
| 27 | 413-512 | 2 | BOLT, Hex, 5/16″-18 x 3/4″, G5, Full Thd, hex, 5/16 NC x 3/4 inch |
| 28 | 492-11031 | 2 | WASHER, LOCK, 5/16″ |
| 29 | 495-11034 | 2 | WASHER, 5/16″, SAE, flat, 11/32 x 11/16 x 1/16 inch |
| 30 | 1990758C2 | 1 | RECEIVER-DRYER, air conditioning |
| 31 | 98178C1 | 4 | SUPPORT, BRACKET – receiver-drier |
| 32 | 1960785C2 | 2 | SUPPORT, BRACKET – receiver-drier mounting |
| 33 | 614-6025 | 2 | BOLT, Hex, M6 x 25, 8.8, BOLT – hex, full threads, 6 – 1.0 x 25 mm, if used |
| 34 | 825-5146 | 2 | NUT, M6, Flg Ser |
| 35 | 131249A2 | 1 | HOSE, 2800 mm (110-1/4 inch) long receiver-drier to cab |
| 36 | 128483A1 | 1 | O-RING, 5/16 ID x 1/16 inch wide |
| 38 | 614-8020 | 4 | BOLT, Hex, M8 x 20, 8.8 |
| 39 | 892-11008 | 4 | WASHER, LOCK, M8 |
| 40 | 825-1408 | 4 | NUT, M8, Cl 8 |
| 41 | 1999923C2 | 1 | HOSE, 1100 mm (43-5/16 inch) long, discharge, compressor to condenser |
| 42 | 128484A1 | 1 | O-RING, 7/16 ID x 1/16 inch wide, at condenser |
| 43 | 128483A1 | 1 | O-RING, 5/16 ID x 1/16 inch wide, at pressure switch fitting |
| 44 | 1250594C1 | 2 | CORE, VALVE |
| 45 | 122554A1 | 1 | CAP, sealing, charge port |
| 46 | 128485A1 | 1 | O-RING, 9/16 ID x 1/16 inch wide, at compressor |
| 1 | 1999922C1 | 1 | HOSE, 1650 mm (65 inch) long, suction, compressor to cab base |
| 2 | 128485A1 | 1 | O-RING, 9/16 ID x 1/16 inch wide, at compressor |
| 3 | 1250594C1 | 1 | CORE, VALVE |
| 4 | 122553A1 | 1 | CAP, sealing |
| 5 | 232948A1 | 1 | SWITCH, PRESSURE, high, 400 psi, replaces 375 psi switch used on some models |
| 6 | 181583A1 | 1 | CONDENSER, air conditioning, see fig.5-16 for hardware attaching condenser to oil cooler, see fig. |
| 7 | 192929A2 | 1 | HOSE, 413 mm (16-17/64 inch) long, condenser to receiver-drier |
| 8 | 128483A1 | 2 | O-RING, 5/16 ID x 1/16 inch wide |
| 9 | 223357A1 | 1 | FIXING BRACKET, CLAMP – retaining |
| 14 | 1954490C2 | 1 | CLAMP, retaining |
| 15 | 413-816 | 1 | BOLT, Hex, 1/2″-13 x 1″, G5, Full Thd |
| 16 | 80679 | 1 | WASHER, LOCK, 1/2″ |
| 17 | 425-108 | 1 | NUT, 1/2″-13, G5 |
| 18 | 1954766C2 | 1 | CLAMP, retaining |
| 19 | 30931R1 | 2 | SCREW, SELF TAPPING, Flat Hd, M6 x 13, special, 6 x 12 mm |
| 30 | 1990758C2 | 1 | RECEIVER-DRYER, air conditioning |
| 31 | T102980 | 1 | CLAMP, BRACKET – receiver-drier mounting |
| 33 | 276-14832 | 1 | SCREW, SELF TAPPING, Hex Hd, 5/16″ x 2″, self-tapping, hex head, 5/16 x 2 inch |
| 35 | 131249A2 | 1 | HOSE, 2800 mm (110-1/4 inch) long, receiver-drier to cab, replaces 131249A1 hose |
| 36 | 128483A1 | 1 | O-RING, 5/16 ID x 1/16 inch wide |
| 41 | 186468A2 | 1 | HOSE, 1500 mm (59-1/16 inch) long, discharge, compressor to condenser |
| 42 | 128484A1 | 1 | O-RING, 7/16 ID x 1/16 inch wide, at condenser |
| 43 | 128483A1 | 1 | O-RING, 5/16 ID x 1/16 inch wide, at pressure switch fitting |
| 44 | 1250594C1 | 2 | CORE, VALVE |
| 45 | 122554A1 | 1 | CAP, sealing, charge port |
| 46 | 128485A1 | 1 | O-RING, 9/16 ID x 1/16 inch wide, at compressor |
| 47 | 234017A1 | 2 | SCREW, BOLT – hex socket, 8 – 1.25 x 16 mm, mounts hoses to radiator, replaces 844-8016 bolt |
| 1 | A189155 | 1 | PULLEY, compressor drive |
| 3 | 131403C1 | 1 | BELT, drive, 38-/12 inch long, compressor |
| 4 | 84715C1 | 1 | BRACKET, SUPPORT – compressor mounting |
| 5 | 814-10130 | 1 | BOLT, Hex, M10 x 130, 8.8 |
| 6 | 892-11010 | 1 | WASHER, LOCK, M10 |
| 7 | 895-15010 | 4 | WASHER, M11 x 24 x 2 |
| 8 | 825-1410 | 1 | NUT, M10, Cl 8 |
| 11 | 614-10025 | 4 | BOLT, Hex, M10 x 25, 8.8, Full Thd |
| 12 | 892-11010 | 4 | WASHER, LOCK, M10 |
| 13 | 895-15010 | 4 | WASHER, M11 x 24 x 2 |
| 14 | 84716C1 | 1 | SUPPORT, STRAP – adjusting |
| 15 | 614-10035 | 2 | BOLT, Hex, M10 x 35, 8.8, Full Thd |
| 16 | 892-11010 | 2 | WASHER, LOCK, M10 |
| 17 | 895-15010 | 3 | WASHER, M11 x 24 x 2 |
| 18 | 825-1410 | 2 | NUT, M10, Cl 8 |
| 19 | 306132C1 | 2 | STRAP, CABLE, .30″ x 14.5″, tie, 14 inch long |
| 21 | 135324A1 | 1 | CLUTCH, ASSEMBLY – compressor |
| 22 | A49667 | 1 | PLUG, hex, oil filler |
| 23 | 128483A1 | 1 | O-RING, 5/16 ID x 1/16 inch wide |
| 1 | A189155 | 1 | PULLEY, compressor drive |
| 3 | 131403C1 | 1 | BELT, drive, 38-/12 inch long, compressor |
| 4 | 237872A1 | 1 | BRACKET, mounting, compressor, replaces 177264A1 bracket |
| 5 | 614-10035 | 3 | BOLT, Hex, M10 x 35, 8.8, Full Thd |
| 6 | 892-11010 | 3 | WASHER, LOCK, M10 |
| 7 | 895-15010 | 6 | WASHER, M11 x 24 x 2 |
| 8 | 825-1410 | 3 | NUT, M10, Cl 8 |
| 11 | 905-10025 | 4 | BOLT, Hex Serr Flg, M10 x 25 |
| 14 | 84716C1 | 1 | SUPPORT, STRAP – adjusting |
| 15 | 905-10025 | 1 | BOLT, Hex Serr Flg, M10 x 25 |
| 19 | L18337 | 2 | STRAP, CABLE, 9.95″-12.1″ lg, tie, 15 inch |
| 21 | 135324A1 | 1 | CLUTCH, ASSEMBLY – compressor |
| 22 | A49667 | 1 | PLUG, hex, oil filler |
| 23 | 128483A1 | 1 | O-RING, 5/16 ID x 1/16 inch wide |
| 24 | 139673A1 | 1 | OIL, lube, a.c. compressor, 250 cc, used with HFC 134A refrigerant |
| 25 | 139696A1 | 1 | OIL, lube, a.c. compressor, six pack, 250cc, used with HFC 134A refrigerant, not shown |
| 1 | 97158C1 | 1 | SUPPORT, BRACKET – mirror, left |
| 2 | 97161C1 | 2 | WASHER, special, left |
| 3 | 814-6035 | 2 | BOLT, Hex, M6 x 35, 8.8 |
| 6 | 1348546C1 | 1 | SUPPORT, BRACKET – mirror, right |
| 7 | 832-10406 | 4 | NUT, LOCK, M6 x 1, Cl 8 |
| 8 | 614-6016 | 4 | BOLT, Hex, M6 x 16, 8.8, Replaces 20 mm long bolt used in A67886 mirror kit |
| 9 | 135371A1 | 2 | MIRROR, rear view, replaces 97165C1 mirror |
| 10 | 895-11006 | 4 | WASHER, M6, If Used |
| 11 | 103212A1 | 1 | BAR, monitor mounting, 356 mm (14-1/64 inch) long |
| 12 | 614-10030 | 2 | BOLT, Hex, M10 x 30, 8.8 |
| 13 | 825-1410 | 2 | NUT, M10, Cl 8 |
| 14 | 895-18010 | 2 | WASHER, M10 x 18 x 1.6 |
| 15 | 103213A1 | 2 | HOLDER, BRACKET – mounting, monitor |
| 16 | 103226A1 | 2 | CLAMP, mounting bracket |
| 17 | 614-8025 | 4 | BOLT, Hex, M8 x 25, 8.8 |
| 18 | 895-11008 | 4 | WASHER, M8 x 16 x 1.6 |
| 19 | 829-1408 | 4 | NUT, M8, Cl 10 |
| 11 | 104466A1 | 1 | BAR, monitor mounting, 556 mm (21-7/8 inch) long |
| 12 | 614-10030 | 2 | BOLT, Hex, M10 x 30, 8.8 |
| 13 | 825-1410 | 2 | NUT, M10, Cl 8 |
| 14 | 895-18010 | 2 | WASHER, M10 x 18 x 1.6 |
| 15 | 103213A1 | 3 | HOLDER, BRACKET – mounting, monitor |
| 16 | 103226A1 | 3 | CLAMP, mounting bracket |
| 17 | 614-8025 | 6 | BOLT, Hex, M8 x 25, 8.8 |
| 18 | 895-11008 | 6 | WASHER, M8 x 16 x 1.6 |
| 19 | 829-1408 | 6 | NUT, M8, Cl 10 |
| 1 | 1342052C1 | 1 | DECAL, Case International, if used |
| 2 | 129163A1 | 1 | DECAL, 7210, Case International, hood, left-hand side (shown), if used |
| 3 | 129164A1 | 1 | DECAL, 7210, Case International, hood, right-hand side, if used |
| 4 | 129165A1 | 1 | DECAL, 7220, Case International, hood, left-hand side (shown), if used |
| 5 | 129166A1 | 1 | DECAL, 7220, Case International, hood, right-hand side, if used |
| 6 | 1334444C1 | 1 | DECAL, door, stripe, right-hand side (silver and gray outer stripes), if used |
| 7 | 1334445C3 | 1 | DECAL, door, stripe, left-hand side (silver and gray outer stripes), if used |
| 8 | 1340033C3 | 1 | DECAL, shift selector, 4-speed reverse without creeper, if used |
| 9 | 1340034C3 | 1 | DECAL, shift selector, 4-speed reverse with creeper, if used |
| 12 | 1334581C2 | 1 | DECAL, 1 ISO, first coupler |
| 13 | 1334582C2 | 1 | DECAL, 2 ISO, second coupler |
| 14 | 1334583C3 | 1 | DECAL, 3 ISO, third coupler |
| 15 | 1334584C3 | 1 | DECAL, 4 ISO, fourth coupler |
| 16 | 1334457C2 | 1 | DECAL, stripe, cab pillar, left-hand side (silver and gray outer stripes), if used |
| 17 | 1334456C2 | 1 | DECAL, stripe, cab pillar, right-hand side (silver and gray outer stripes), if used |
| 18 | 1342040C1 | 1 | SYMBOLS, EMBLEM – Magnum, if used, for Magnum emblem on instrument panel cover, see fig. 9-46 |
| 20 | 1968108C2 | 1 | GUIDE, TRIM – hood sight |
| 1 | 123330A1 | 1 | DECAL, fuse panel, prior to tractor P.I.N. JJA0064978 |
| 1 | 128975A1 | 1 | DECAL, fuse panel (French) |
| 3 | 1954287C1 | 1 | DECAL, lift to close, latch, front right window |
| 3 | 1976753C1 | 1 | DECAL, lift to close, latch, front right window (French), Part of the Decal Kit P/N 1974527C2 |
| 4 | 1954288C1 | 1 | DECAL, lift to close, latch, rear window |
| 4 | 1976754C1 | 1 | DECAL, lift to close, latch, rear window (French), Part of the Decal Kit P/N 1974527C2 |
| 5 | 134200A1 | 1 | DECAL, maintenance chart |
| 5 | 1974532C2 | 1 | DECAL, maintenance chart, 2-wheel drive (French), no longer available and no longer included in kit |
| 6 | 1974533C2 | 1 | DECAL, maintenance chart, MFD (French), not shown, no longer available and no longer included in |
| 7 | 111605A2 | 1 | DECAL, employee involvement, quality assurance, replaces 111605A1 decal |
| 8 | 1955349C1 | 1 | DECAL, ether start |
| 9 | A189007 | 1 | DECAL, warranty, fuel pump |
| 10 | 321-4622 | 1 | DECAL, push to unlock, instructions, hood unlatch |
| 10 | 321-5625 | 1 | DECAL, push to unlock, instructions, hood unlatch (French), Part of the Decal Kit P/N 1974527C2 |
| 11 | 1968123C2 | 1 | DECAL, negative jump start |
| 11 | 1974534C1 | 1 | DECAL, negative jump start (French), Part of the Decal Kit P/N 1974527C2 |
| 12 | 1955107C1 | 1 | PLATE, LARGE, lamp switch cover |
| 13 | 202013C2 | 1 | TRAFFIC SIGNS, EMBLEM – slow moving vehicle |
| 14 | 98000C1 | 3 | SCREW, FASTENER – slow moving vehicle emblem |
| 15 | 195-81005 | 3 | WASHER, 3/8″ x 7/8″ x .083″, flat, 3/8 x 7/8 x 5/64 inch |
| 16 | 1999943C1 | 1 | DECAL, auxiliary valve control lever pattern, and sector |
| 17 | 176262A1 | 1 | DECAL, CE symbol, 60 mm |
| 1 | 1960744C2 | 1 | DECAL, Warning, avoid injury or death, always keep PTO dnvelme shields in place |
| 1 | 1974530C2 | 1 | DECAL, Warning, avoid injury or death, always keep PTO dnvelme shields in place (French), Part of |
| 2 | 1968056C2 | 1 | DECAL, Warning, avoid injury or death, before starting engine |
| 2 | 1974538C1 | 1 | DECAL, Warning, avoid injury or death, before starting engine (French), Part of the Decal Kit P/N |
| 3 | 321-3339 | 1 | DECAL, Warning, be certain both latches are fully engaged across the implement lift pins |
| 3 | 1974537C1 | 1 | DECAL, Warning, be certain both latches are fully engaged across the implement lift pins (French) |
| 4 | 321-6714 | 1 | DECAL, Warning, batteries contain acid and explosive gas |
| 4 | 321-6806 | 1 | DECAL, Warning, batteries contain acid and explosive gas (French), Part of the Decal Kit P/N |
| 5 | 1334594C2 | 1 | DECAL, Important, failure due to use of improper fluid, hydraulic fluid warranty |
| 5 | 1334596C2 | 1 | DECAL, Important, failure due to use of improper fluid, hydraulic fluid warranty (French), Part of the |
| 6 | 1334627C2 | 2 | DECAL, Important, when adjusting front wheel treads, MFD steering |
| 6 | 1974531C1 | 2 | DECAL, Important, when adjusting front wheel treads, MFD steering (French), Part of the Decal Kit |
| 7 | A187743 | 1 | DECAL, WARNING, Warning, to avoid possible eye damage from microwave signals emitted by this |
| 7 | A187756 | 1 | DECAL, Warning, to avoid possible eye damage from microwave signals emitted by this sensor |
| 8 | J910778 | 1 | DECAL, Caution, open during fill |
| 8 | 1974544C1 | 1 | DECAL, Caution, open during fill (French), Part of the Decal Kit P/N 1974527C2 |
| 9 | 1968008C1 | 1 | DECAL, no step |
| 9 | 1974542C1 | 1 | DECAL, no step (French) |
| 10 | 1342629C2 | 2 | DECAL, precharge only use dry nitrogen |
| 11 | 1342630C2 | 2 | DECAL, Caution, precharged to 135 psi |
| 12 | 1334606C2 | 1 | DECAL, Important, do not use the 540 rpm PTO for implements requiring more than 85 PTO |
| 13 | 321-7040 | 1 | DECAL, Danger, starting in gear can cause death, start engine only from operator seat |
| 13 | 142002A1 | 1 | DECAL, Danger, starting in gear can cause death, start engine only from operator seat (French), Part |
| 14 | 1975866C1 | 1 | PLATE ASSY., cover, decal, radio opening, models without radio |